Долго грузится система

[Ogis1975]

установил smartmontools перезагрузился не знаю что случилось но загрузка была быстрее
dmesg

Код Выделить Развернуть


[spoiler]
[    1.535454] ACPI: Interpreter enabled
[    1.535473] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    1.535484] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    1.535512] ACPI: (supports S0 S3 S4 S5)
[    1.535516] ACPI: Using IOAPIC for interrupt routing
[    1.536124] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.536982] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.538053] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.577206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.577226] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.577699] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    1.578092] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[    1.578103] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    1.578416] PCI host bridge to bus 0000:00
[    1.578423] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.578428] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.578433] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.578437] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.578442] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    1.578446] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    1.578450] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    1.578454] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.578458] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.578462] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.578466] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.578470] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.578473] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.578477] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    1.578481] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    1.578485] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[    1.578489] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[    1.578493] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[    1.578508] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[    1.578691] pci 0000:00:01.0: [1002:9832] type 00 class 0x030000
[    1.578713] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.578727] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    1.578737] pci 0000:00:01.0: reg 0x20: [io  0x4000-0x40ff]
[    1.578747] pci 0000:00:01.0: reg 0x24: [mem 0xf0b00000-0xf0b3ffff]
[    1.578757] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.578807] pci 0000:00:01.0: supports D1 D2
[    1.578811] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    1.578971] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    1.578991] pci 0000:00:01.1: reg 0x10: [mem 0xf0b40000-0xf0b43fff 64bit]
[    1.579066] pci 0000:00:01.1: supports D1 D2
[    1.579199] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[    1.579360] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[    1.579447] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    1.579609] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[    1.579696] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    1.579775] pci 0000:00:02.3: System wakeup disabled by ACPI
[    1.579868] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[    1.579955] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    1.580138] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    1.580164] pci 0000:00:10.0: reg 0x10: [mem 0xf0b48000-0xf0b49fff 64bit]
[    1.580268] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    1.580347] pci 0000:00:10.0: System wakeup disabled by ACPI
[    1.580449] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    1.580473] pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
[    1.580484] pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
[    1.580495] pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
[    1.580506] pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
[    1.580517] pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
[    1.580528] pci 0000:00:11.0: reg 0x24: [mem 0xf0b4e000-0xf0b4e3ff]
[    1.580587] pci 0000:00:11.0: PME# supported from D3hot
[    1.580737] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    1.580753] pci 0000:00:12.0: reg 0x10: [mem 0xf0b4d000-0xf0b4dfff]
[    1.580868] pci 0000:00:12.0: System wakeup disabled by ACPI
[    1.580959] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    1.580980] pci 0000:00:12.2: reg 0x10: [mem 0xf0b4c000-0xf0b4c0ff]
[    1.581058] pci 0000:00:12.2: supports D1 D2
[    1.581062] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    1.581132] pci 0000:00:12.2: System wakeup disabled by ACPI
[    1.581223] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    1.581239] pci 0000:00:13.0: reg 0x10: [mem 0xf0b4b000-0xf0b4bfff]
[    1.581356] pci 0000:00:13.0: System wakeup disabled by ACPI
[    1.581448] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    1.581469] pci 0000:00:13.2: reg 0x10: [mem 0xf0b4a000-0xf0b4a0ff]
[    1.581547] pci 0000:00:13.2: supports D1 D2
[    1.581550] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    1.581624] pci 0000:00:13.2: System wakeup disabled by ACPI
[    1.581715] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    1.581906] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    1.581932] pci 0000:00:14.2: reg 0x10: [mem 0xf0b44000-0xf0b47fff 64bit]
[    1.582004] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    1.582152] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    1.582353] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[    1.582496] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[    1.582640] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[    1.582780] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[    1.582927] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[    1.583062] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[    1.583356] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
[    1.583382] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.583399] pci 0000:01:00.0: reg 0x18: [mem 0xf0a00000-0xf0a3ffff 64bit]
[    1.583410] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    1.583428] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.583509] pci 0000:01:00.0: supports D1 D2
[    1.583513] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    1.594681] pci 0000:00:02.1: PCI bridge to [bus 01]
[    1.594691] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    1.594698] pci 0000:00:02.1:   bridge window [mem 0xf0a00000-0xf0afffff]
[    1.594707] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.594853] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
[    1.594897] pci 0000:02:00.0: reg 0x10: [mem 0xf0900000-0xf093ffff 64bit]
[    1.594917] pci 0000:02:00.0: reg 0x18: [io  0x2000-0x207f]
[    1.595053] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.606670] pci 0000:00:02.3: PCI bridge to [bus 02]
[    1.606680] pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
[    1.606687] pci 0000:00:02.3:   bridge window [mem 0xf0900000-0xf09fffff]
[    1.606849] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[    1.606900] pci 0000:03:00.0: reg 0x10: [mem 0xf0800000-0xf087ffff 64bit]
[    1.606975] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    1.607092] pci 0000:03:00.0: supports D1 D2
[    1.607096] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.618705] pci 0000:00:02.4: PCI bridge to [bus 03]
[    1.618724] pci 0000:00:02.4:   bridge window [mem 0xf0800000-0xf08fffff]
[    1.648417] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.648570] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.648718] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.648864] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.648991] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.649087] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.649183] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.649277] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.649634] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.649731] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    1.650020] vgaarb: setting as boot device: PCI:0000:00:01.0
[    1.650025] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    1.650036] vgaarb: loaded
[    1.650039] vgaarb: bridge control possible 0000:00:01.0
[    1.650283] PCI: Using ACPI for IRQ routing
[    1.652098] PCI: pci_cache_line_size set to 64 bytes
[    1.652211] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
[    1.652215] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    1.652218] e820: reserve RAM buffer [mem 0xa9363000-0xabffffff]
[    1.652222] e820: reserve RAM buffer [mem 0xa9bbc000-0xabffffff]
[    1.652225] e820: reserve RAM buffer [mem 0xaf5bf000-0xafffffff]
[    1.652228] e820: reserve RAM buffer [mem 0xafc00000-0xafffffff]
[    1.652231] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
[    1.652516] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.652523] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    1.654611] Switched to clocksource hpet
[    1.665125] pnp: PnP ACPI init
[    1.665157] ACPI: bus type PNP registered
[    1.665469] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    1.665475] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.665481] system 00:00: [mem 0xff000000-0xff000fff] has been reserved
[    1.665489] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.687168] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.687270] pnp 00:02: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active)
[    1.687451] pnp 00:03: Plug and Play ACPI device, IDs SYN2b1f SYN0700 SYN0002 PNP0f13 (active)
[    1.687706] system 00:04: [io  0x0400-0x04cf] could not be reserved
[    1.687712] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.687721] system 00:04: [io  0x04d6] has been reserved
[    1.687726] system 00:04: [io  0x0680-0x06ff] has been reserved
[    1.687731] system 00:04: [io  0x077a] has been reserved
[    1.687736] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    1.687740] system 00:04: [io  0x0c14] has been reserved
[    1.687745] system 00:04: [io  0x0c50-0x0c52] has been reserved
[    1.687749] system 00:04: [io  0x0c6c] has been reserved
[    1.687753] system 00:04: [io  0x0c6f] has been reserved
[    1.687758] system 00:04: [io  0x0cd0-0x0cdb] has been reserved
[    1.687762] system 00:04: [io  0x0840-0x0847] has been reserved
[    1.687769] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.687940] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.687946] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
[    1.687951] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.727490] pnp: PnP ACPI: found 6 devices
[    1.727499] ACPI: bus type PNP unregistered
[    1.737052] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with reserved [mem 0xffc00000-0xffffffff]
[    1.737059] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    1.737066] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.737124] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0b60000-0xf0b7ffff pref]
[    1.737132] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0a40000-0xf0a5ffff pref]
[    1.737137] pci 0000:00:02.1: PCI bridge to [bus 01]
[    1.737142] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    1.737150] pci 0000:00:02.1:   bridge window [mem 0xf0a00000-0xf0afffff]
[    1.737156] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.737164] pci 0000:00:02.3: PCI bridge to [bus 02]
[    1.737168] pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
[    1.737175] pci 0000:00:02.3:   bridge window [mem 0xf0900000-0xf09fffff]
[    1.737187] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0880000-0xf088ffff pref]
[    1.737191] pci 0000:00:02.4: PCI bridge to [bus 03]
[    1.737198] pci 0000:00:02.4:   bridge window [mem 0xf0800000-0xf08fffff]
[    1.737209] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.737213] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.737217] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.737221] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    1.737225] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    1.737228] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    1.737232] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    1.737236] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    1.737240] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    1.737244] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    1.737247] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    1.737251] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    1.737255] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    1.737258] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    1.737262] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
[    1.737266] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[    1.737270] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[    1.737274] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.737278] pci_bus 0000:01: resource 1 [mem 0xf0a00000-0xf0afffff]
[    1.737282] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.737286] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.737290] pci_bus 0000:02: resource 1 [mem 0xf0900000-0xf09fffff]
[    1.737294] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
[    1.737431] NET: Registered protocol family 2
[    1.737953] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.738135] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.738289] TCP: Hash tables configured (established 32768 bind 32768)
[    1.738341] TCP: reno registered
[    1.738357] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.738394] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.738556] NET: Registered protocol family 1
[    1.738592] pci 0000:00:01.0: Video device with shadowed ROM
[    1.883228] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[    1.883256] PCI: CLS 64 bytes, default 64
[    1.883386] Unpacking initramfs...
[    2.424947] Freeing initrd memory: 14664K (ffff88003634c000 - ffff88003719e000)
[    2.424998] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.425004] software IO TLB [mem 0xa3fc0000-0xa7fc0000] (64MB) mapped at [ffff8800a3fc0000-ffff8800a7fbffff]
[    2.425096] Simple Boot Flag at 0x44 set to 0x1
[    2.425433] perf: AMD NB counters detected
[    2.425438] perf: AMD L2I counters detected
[    2.425577] microcode: CPU0: patch_level=0x0700010b
[    2.425610] microcode: CPU1: patch_level=0x0700010b
[    2.425621] microcode: CPU2: patch_level=0x0700010b
[    2.425635] microcode: CPU3: patch_level=0x0700010b
[    2.425780] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.425790] LVT offset 0 assigned for vector 0x400
[    2.425830] perf: AMD IBS detected (0x000000ff)
[    2.425987] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x420000 bytes, mapped to 0xffffc90004780000
[    2.425993] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1366x768x32, linelength=5632
[    2.432990] Console: switching to colour frame buffer device 170x48
[    2.439754] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    2.440310] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    2.440396] audit: initializing netlink subsys (disabled)
[    2.440433] audit: type=2000 audit(1479561757.116:1): initialized
[    2.441360] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.441410] zbud: loaded
[    2.441796] VFS: Disk quotas dquot_6.5.2
[    2.441831] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.441947] msgmni has been set to 6674
[    2.442619] alg: No test for stdrng (krng)
[    2.442687] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.442786] io scheduler noop registered
[    2.442792] io scheduler deadline registered
[    2.442872] io scheduler cfq registered (default)
[    2.443037] pcieport 0000:00:02.1: device [1022:1439] has invalid IRQ; check vendor BIOS
[    2.443260] pcieport 0000:00:02.1: irq 72 for MSI/MSI-X
[    2.443393] pcieport 0000:00:02.3: device [1022:1439] has invalid IRQ; check vendor BIOS
[    2.443522] pcieport 0000:00:02.3: irq 73 for MSI/MSI-X
[    2.443616] pcieport 0000:00:02.4: device [1022:1439] has invalid IRQ; check vendor BIOS
[    2.443742] pcieport 0000:00:02.4: irq 74 for MSI/MSI-X
[    2.443913] pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
[    2.443918] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    2.443924] pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
[    2.443956] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[    2.443961] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    2.443967] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
[    2.443998] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
[    2.444002] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    2.444008] pcie_pme 0000:00:02.4:pcie01: service driver pcie_pme loaded
[    2.444048] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.444147] pciehp 0000:00:02.1:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[    2.444200] pciehp 0000:00:02.1:pcie04: service driver pciehp loaded
[    2.444213] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.444318] GHES: HEST is not enabled!
[    2.444463] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.445375] Linux agpgart interface v0.103
[    2.445603] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSB] at 0x60,0x64 irq 1,12
[    2.454386] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.454398] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.454689] mousedev: PS/2 mouse device common for all mice
[    2.455908] rtc_cmos 00:01: RTC can wake from S4
[    2.456111] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.456142] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    2.456174] ledtrig-cpu: registered to indicate activity on CPUs
[    2.457083] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.457087] AMD IOMMUv2 functionality not available on this system
[    2.457262] TCP: cubic registered
[    2.457400] NET: Registered protocol family 10
[    2.457832] mip6: Mobile IPv6
[    2.457840] NET: Registered protocol family 17
[    2.457853] mpls_gso: MPLS GSO support
[    2.458537] registered taskstats version 1
[    2.459559] rtc_cmos 00:01: setting system clock to 2016-11-19 13:22:38 UTC (1479561758)
[    2.459745] PM: Hibernation image not present or could not be loaded.
[    2.461840] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    2.461844] Write protecting the kernel read-only data: 8192k
[    2.462589] Freeing unused kernel memory: 896K (ffff880001720000 - ffff880001800000)
[    2.463757] Freeing unused kernel memory: 212K (ffff8800019cb000 - ffff880001a00000)
[    2.467151] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.480743] systemd-udevd[73]: starting version 215
[    2.481347] random: systemd-udevd urandom read with 5 bits of entropy available
[    2.512064] ACPI: bus type USB registered
[    2.512121] usbcore: registered new interface driver usbfs
[    2.512150] usbcore: registered new interface driver hub
[    2.512330] usbcore: registered new device driver usb
[    2.512385] SCSI subsystem initialized
[    2.513517] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:89:84:db:63:d4]
[    2.514219] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.514236] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    2.514265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.514494] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[    2.514504] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[    2.514514] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[    2.514524] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
[    2.514533] xhci_hcd 0000:00:10.0: irq 79 for MSI/MSI-X
[    2.514804] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.514809] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.514813] usb usb1: Product: xHCI Host Controller
[    2.514817] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    2.514820] usb usb1: SerialNumber: 0000:00:10.0
[    2.514896] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.515117] hub 1-0:1.0: USB hub found
[    2.515149] hub 1-0:1.0: 2 ports detected
[    2.515405] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.515416] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.515799] libata version 3.00 loaded.
[    2.515903] ehci-pci: EHCI PCI platform driver
[    2.517845] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.517899] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.517904] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.517907] usb usb2: Product: xHCI Host Controller
[    2.517911] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    2.517914] usb usb2: SerialNumber: 0000:00:10.0
[    2.518167] hub 2-0:1.0: USB hub found
[    2.518186] hub 2-0:1.0: 2 ports detected
[    2.518959] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.518972] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[    2.518982] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.518995] ehci-pci 0000:00:12.2: debug port 1
[    2.519058] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0b4c000
[    2.530706] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.530879] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.530884] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.530889] usb usb3: Product: EHCI Host Controller
[    2.530893] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.530896] usb usb3: SerialNumber: 0000:00:12.2
[    2.531206] hub 3-0:1.0: USB hub found
[    2.531226] hub 3-0:1.0: 4 ports detected
[    2.533638] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.533652] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    2.533660] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.533673] ehci-pci 0000:00:13.2: debug port 1
[    2.533724] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0b4a000
[    2.542784] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.543171] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.543177] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.543182] usb usb4: Product: EHCI Host Controller
[    2.543186] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.543190] usb usb4: SerialNumber: 0000:00:13.2
[    2.543507] hub 4-0:1.0: USB hub found
[    2.543536] hub 4-0:1.0: 4 ports detected
[    2.543897] ahci 0000:00:11.0: version 3.0
[    2.544148] ahci 0000:00:11.0: irq 80 for MSI/MSI-X
[    2.544216] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.544224] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[    2.544365] ohci-pci: OHCI PCI platform driver
[    2.545885] scsi0 : ahci
[    2.546465] scsi1 : ahci
[    2.546595] ata1: SATA max UDMA/133 abar m1024@0xf0b4e000 port 0xf0b4e100 irq 80
[    2.546600] ata2: SATA max UDMA/133 abar m1024@0xf0b4e000 port 0xf0b4e180 irq 80
[    2.546846] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.546862] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[    2.546918] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0b4d000
[    2.606857] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.606866] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.606870] usb usb5: Product: OHCI PCI host controller
[    2.606874] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.606878] usb usb5: SerialNumber: 0000:00:12.0
[    2.607274] hub 5-0:1.0: USB hub found
[    2.607294] hub 5-0:1.0: 4 ports detected
[    2.607752] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.607764] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[    2.607802] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0b4b000
[    2.666944] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.666953] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.666957] usb usb6: Product: OHCI PCI host controller
[    2.666961] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.666965] usb usb6: SerialNumber: 0000:00:13.0
[    2.667351] hub 6-0:1.0: USB hub found
[    2.667369] hub 6-0:1.0: 4 ports detected
[    3.034860] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.038780] ata1.00: ATA-8: ST500LT012-9WS142, 0001LVM1, max UDMA/133
[    3.038788] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.038815] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.039505] ata1.00: configured for UDMA/133
[    3.039796] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-9WS14 LVM1 PQ: 0 ANSI: 5
[    3.054087] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8D1, 8.10, max UDMA/100
[    3.072432] ata2.00: configured for UDMA/100
[    3.090373] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8D1    8.10 PQ: 0 ANSI: 5
[    3.102758] usb 3-4: new high-speed USB device number 3 using ehci-pci
[    3.107144] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.107152] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.107336] sd 0:0:0:0: [sda] Write Protect is off
[    3.107343] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.107409] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.122092] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.122100] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.122471] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.123732] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.123912] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.156344]  sda: sda1 sda2 sda3 sda4
[    3.157339] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.211009] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[    3.211104] ata2.00: irq_stat 0x08000000, interface fatal error
[    3.211169] ata2: SError: { Handshk }
[    3.211215] sr 1:0:0:0: CDB:
[    3.211219] Prevent/Allow Medium Removal: 1e 00 00 00 00 00
[    3.211235] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 16
         res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[    3.211379] ata2.00: status: { DRDY }
[    3.211425] ata2: hard resetting link
[    3.253723] usb 3-4: New USB device found, idVendor=5986, idProduct=0294
[    3.253731] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.253736] usb 3-4: Product: Lenovo EasyCamera
[    3.253740] usb 3-4: Manufacturer: Bison Corp.
[    3.366811] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    3.422917] tsc: Refined TSC clocksource calibration: 1497.192 MHz
[    3.439159] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4902]
[    3.499706] usb 4-1: New USB device found, idVendor=0bda, idProduct=0129
[    3.499715] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.499720] usb 4-1: Product: USB2.0-CRW
[    3.499724] usb 4-1: Manufacturer: Generic
[    3.499727] usb 4-1: SerialNumber: 20100201396000000
[    3.505835] usbcore: registered new interface driver rtsx_usb
[    3.529342] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 739436
[    3.583812] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    3.706949] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.745770] ata2.00: configured for UDMA/100
[    3.751479] ata2: EH complete
[    3.751511] sr 1:0:0:0: ioctl_internal_command return code = 8000002
[    3.751515]    : Sense Key : Aborted Command [current] [descriptor]
[    3.751522]    : Add. Sense: No additional sense information
[    3.854542] PM: Starting manual resume from disk
[    3.854554] PM: Hibernation image partition 8:2 present
[    3.854557] PM: Looking for hibernation image.
[    3.855074] PM: Image not found (code -22)
[    3.855077] PM: Hibernation image not present or could not be loaded.
[    4.022972] usb 6-2: new full-speed USB device number 2 using ohci-pci
[    4.050299] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.191952] usb 6-2: New USB device found, idVendor=0cf3, idProduct=3004
[    4.191961] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.191965] usb 6-2: Product: Bluetooth USB Host Controller
[    4.191969] usb 6-2: Manufacturer: Atheros Communications
[    4.191973] usb 6-2: SerialNumber: Alaska Day 2006
[    4.423019] Switched to clocksource tsc
[    4.458991] usb 5-1: new full-speed USB device number 2 using ohci-pci
[    4.632032] usb 5-1: New USB device found, idVendor=046d, idProduct=c52f
[    4.632041] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.632046] usb 5-1: Product: USB Receiver
[    4.632050] usb 5-1: Manufacturer: Logitech
[    4.698962] random: nonblocking pool is initialized
[    4.713585] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    4.713973] systemd[1]: Detected architecture 'x86-64'.
[    4.938725] systemd[1]: Inserted module 'autofs4'
[    4.966555] systemd[1]: Set hostname to <phantom>.
[    6.047115] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.047254] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.047283] systemd[1]: Starting Remote File Systems (Pre).
[    6.047338] systemd[1]: Reached target Remote File Systems (Pre).
[    6.047392] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.047558] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.047585] systemd[1]: Starting Encrypted Volumes.
[    6.047608] systemd[1]: Reached target Encrypted Volumes.
[    6.047635] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.047704] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.047730] systemd[1]: Expecting device dev-sda2.device...
[    6.047754] systemd[1]: Expecting device dev-disk-by\x2duuid-5418dfa5\x2dfa53\x2d4ad2\x2d9c24\x2da53f822c9ae4.device...
[    6.047779] systemd[1]: Expecting device dev-disk-by\x2duuid-7634\x2d8F79.device...
[    6.047803] systemd[1]: Expecting device dev-disk-by\x2duuid-037f9e1c\x2d81b7\x2d449f\x2d84b3\x2da5ac6ac0725a.device...
[    6.047825] systemd[1]: Starting Root Slice.
[    6.047883] systemd[1]: Created slice Root Slice.
[    6.047906] systemd[1]: Starting User and Session Slice.
[    6.048086] systemd[1]: Created slice User and Session Slice.
[    6.048108] systemd[1]: Starting Delayed Shutdown Socket.
[    6.048163] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.048185] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.048253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.048275] systemd[1]: Starting Journal Socket (/dev/log).
[    6.048341] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.048369] systemd[1]: Starting udev Control Socket.
[    6.048420] systemd[1]: Listening on udev Control Socket.
[    6.048447] systemd[1]: Starting udev Kernel Socket.
[    6.048492] systemd[1]: Listening on udev Kernel Socket.
[    6.048518] systemd[1]: Starting Journal Socket.
[    6.048581] systemd[1]: Listening on Journal Socket.
[    6.048620] systemd[1]: Starting System Slice.
[    6.048768] systemd[1]: Created slice System Slice.
[    6.048802] systemd[1]: Started File System Check on Root Device.
[    6.048822] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    6.048992] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.049015] systemd[1]: Starting system-getty.slice.
[    6.049175] systemd[1]: Created slice system-getty.slice.
[    6.049221] systemd[1]: Starting Increase datagram queue length...
[    6.050101] systemd[1]: Mounting Huge Pages File System...
[    6.051107] systemd[1]: Mounting Debug File System...
[    6.051939] systemd[1]: Starting udev Coldplug all Devices...
[    6.085497] systemd[1]: Started Set Up Additional Binary Formats.
[    6.104583] systemd[1]: Starting Load Kernel Modules...
[    6.105683] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.106524] systemd[1]: Mounting POSIX Message Queue File System...
[    6.107400] systemd[1]: Starting Slices.
[    6.107432] systemd[1]: Reached target Slices.
[    6.326445] systemd[1]: Started udev Coldplug all Devices.
[    6.338351] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.338644] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.746791] systemd[1]: Started Create Static Device Nodes in /dev.
[    6.747057] systemd[1]: Starting udev Kernel Device Manager...
[    6.790790] lp: driver loaded but no devices found
[    6.807752] systemd[1]: Mounted POSIX Message Queue File System.
[    6.807847] systemd[1]: Mounted Debug File System.
[    6.807896] systemd[1]: Mounted Huge Pages File System.
[    6.808489] systemd[1]: Started Increase datagram queue length.
[    6.818736] systemd[1]: Starting Syslog Socket.
[    6.818823] systemd[1]: Listening on Syslog Socket.
[    6.818857] systemd[1]: Starting Journal Service...
[    6.819985] systemd[1]: Started Journal Service.
[    6.855631] systemd-udevd[173]: starting version 215
[    7.011781] ppdev: user-space parallel port driver
[    7.136931] fuse init (API version 7.23)
[    8.436272] ACPI: acpi_idle registered with cpuidle
[    8.450463] acpi-cpufreq: overriding BIOS provided _PSD data
[    8.461946] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    8.461956] ACPI: Power Button [PWRB]
[    8.462099] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    8.462166] ACPI: Lid Switch [LID]
[    8.462263] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    8.462270] ACPI: Power Button [PWRF]
[    8.496443] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.496562] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    8.496594] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    8.539549] acpi device:00: registered as cooling_device4
[    8.539685] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    8.539782] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    8.540162] acpi device:0a: registered as cooling_device5
[    8.540266] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input7
[    8.567623] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.626833] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMB0) (20140424/utaddress-254)
[    8.626847] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.671277] ACPI: Battery Slot [BAT1] (battery present)
[    8.671719] ACPI: AC Adapter [ACAD] (on-line)
[    8.743421] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input8
[    8.774291] [drm] Initialized drm 1.1.0 20060810
[    8.774953] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.876927] EFI Variables Facility v0.08 2004-May-17
[    8.909474] pstore: Registered efi as persistent store backend
[    8.925176] EDAC MC: Ver: 3.0.0
[    8.926337] MCE: In-kernel MCE decoding enabled.
[    8.927279] AMD64 EDAC driver v3.4.0
[    8.927325] EDAC amd64: DRAM ECC disabled.
[    8.927338] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[    8.965884] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    9.107317] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[    9.107407] ata2.00: irq_stat 0x40000001
[    9.107455] sr 1:0:0:0: CDB:
[    9.107459] Test Unit Ready: 00 00 00 00 00 00
[    9.107475] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 3
         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[    9.107617] ata2.00: status: { DRDY ERR }
[    9.107667] ata2: hard resetting link
[    9.318209] snd_hda_intel 0000:00:01.1: irq 81 for MSI/MSI-X
[    9.318635] snd_hda_intel 0000:00:14.2: irq 82 for MSI/MSI-X
[    9.393064] media: Linux media interface: v0.10
[    9.419517] Linux video capture interface: v2.00
[    9.423202] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[    9.519024] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0294)
[    9.521674] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:12.2/usb3/3-4/3-4:1.0/input/input11
[    9.521933] usbcore: registered new interface driver uvcvideo
[    9.521940] USB Video Class driver (1.1.1)
[    9.596654] Bluetooth: Core ver 2.19
[    9.596687] NET: Registered protocol family 31
[    9.596690] Bluetooth: HCI device and connection manager initialized
[    9.596704] Bluetooth: HCI socket layer initialized
[    9.596709] Bluetooth: L2CAP socket layer initialized
[    9.596735] Bluetooth: SCO socket layer initialized
[    9.603260] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    9.626557] usbcore: registered new interface driver btusb
[    9.631458] ata2.00: configured for UDMA/100
[    9.631858] ata2: EH complete
[    9.736275] sound hdaudioC1D0: CX20757: BIOS auto-probing.
[    9.736582] sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    9.736593] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.736601] sound hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    9.736608] sound hdaudioC1D0:    mono: mono_out=0x0
[    9.736615] sound hdaudioC1D0:    inputs:
[    9.736623] sound hdaudioC1D0:      Internal Mic=0x1a
[    9.736631] sound hdaudioC1D0:      Mic=0x19
[    9.741972] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input12
[    9.747322] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x6 frozen
[    9.747459] ata2.00: irq_stat 0x08000000, interface fatal error
[    9.747566] sr 1:0:0:0: [sr0] CDB:
[    9.747571] Inquiry: 12 00 00 00 24 00
[    9.747596] ata2.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 15 pio 16420 in
         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[    9.747840] ata2.00: status: { DRDY }
[    9.747910] ata2: hard resetting link
[    9.752078] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[    9.752314] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[    9.753161] cfg80211: Calling CRDA to update world regulatory domain
[    9.776757] usb 6-2: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2)
[    9.776847] usb 6-2: Direct firmware load failed with error -2
[    9.776852] usb 6-2: Falling back to user helper
[   10.064575] AVX version of gcm_enc/dec engaged.
[   10.071367] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[   10.211667] hidraw: raw HID events driver (C) Jiri Kosina
[   10.239334] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.267790] ata2.00: configured for UDMA/100
[   10.268163] ata2: EH complete
[   10.280185] alg: No test for crc32 (crc32-pclmul)
[   10.287584] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[   10.287709] ata2.00: irq_stat 0x08000000, interface fatal error
[   10.287797] ata2: SError: { Handshk }
[   10.287860] sr 1:0:0:0: CDB:
[   10.287865] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[   10.287889] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 19 pio 16392 in
         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[   10.288100] ata2.00: status: { DRDY }
[   10.288161] ata2: hard resetting link
[   10.379041] [drm] radeon kernel modesetting enabled.
[   10.379073] VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[   10.379138] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree.
[   10.379408] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree.
[   10.387025] Bluetooth: Loading patch file failed
[   10.387160] ath3k: probe of 6-2:1.0 failed with error -12
[   10.387345] usbcore: registered new interface driver ath3k
[   10.501052] usbcore: registered new interface driver usbhid
[   10.501065] usbhid: USB HID core driver
[   10.530843] ath: phy0: Set BT/WLAN RX diversity capability
[   10.537700] ath: phy0: ASPM enabled: 0x42
[   10.537710] ath: EEPROM regdomain: 0x65
[   10.537713] ath: EEPROM indicates we should expect a direct regpair map
[   10.537718] ath: Country alpha2 being used: 00
[   10.537721] ath: Regpair used: 0x65
[   10.573196] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:046D:C52F.0001/input/input15
[   10.573923] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
[   10.574340] Adding 9765884k swap on /dev/sda2.  Priority:-1 extents:1 across:9765884k FS
[   10.577857] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.1/0003:046D:C52F.0002/input/input16
[   10.578453] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
[   10.607278] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.608311] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004d00000, irq=36
[   10.779446] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.807845] ata2.00: configured for UDMA/100
[   10.808179] ata2: EH complete
[   10.819395] ata2: limiting SATA link speed to 1.5 Gbps
[   10.819407] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[   10.819500] ata2.00: irq_stat 0x08000000, interface fatal error
[   10.819564] ata2: SError: { Handshk }
[   10.819610] sr 1:0:0:0: CDB:
[   10.819613] Test Unit Ready: 00 00 00 00 00 00
[   10.819629] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 21
         res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[   10.819773] ata2.00: status: { DRDY }
[   10.819819] ata2: hard resetting link
[   11.017503] kvm: disabled by bios
[   11.037878] kvm: disabled by bios
[   11.050600] kvm: disabled by bios
[   11.061915] kvm: disabled by bios
[   11.311634] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   11.350595] ata2.00: configured for UDMA/100
[   11.356162] ata2: EH complete
[   11.593147] cfg80211: World regulatory domain updated:
[   11.593165] cfg80211:  DFS Master region: unset
[   11.593172] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.593182] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.593190] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.593198] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   11.593207] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.593216] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   11.593224] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   11.593231] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.593238] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   12.283522] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   12.988090] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   13.161331] systemd-journald[178]: Received request to flush runtime journal from PID 1
[   14.446682] RPC: Registered named UNIX socket transport module.
[   14.446690] RPC: Registered udp transport module.
[   14.446692] RPC: Registered tcp transport module.
[   14.446695] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.465657] FS-Cache: Loaded
[   14.506157] FS-Cache: Netfs 'nfs' registered for caching
[   14.559758] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   20.901335] alx 0000:02:00.0: irq 83 for MSI/MSI-X
[   20.903047] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.924507] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.269234] wlan0: authenticate with c8:3a:35:15:45:a8
[   22.276360] wlan0: send auth to c8:3a:35:15:45:a8 (try 1/3)
[   22.278368] wlan0: authenticated
[   22.280328] wlan0: associate with c8:3a:35:15:45:a8 (try 1/3)
[   22.283984] wlan0: RX AssocResp from c8:3a:35:15:45:a8 (capab=0x411 status=0 aid=5)
[   22.284120] wlan0: associated
[   22.284332] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   26.384807] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x6 frozen
[   26.384826] ata2.00: irq_stat 0x08000000, interface fatal error
[   26.384844] sr 1:0:0:0: CDB:
[   26.384851] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[   26.384885] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 21 pio 16392 in
         res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[   26.384895] ata2.00: status: { DRDY }
[   26.384910] ata2: hard resetting link
[   26.876789] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   26.915691] ata2.00: configured for UDMA/100
[   26.921306] ata2: EH complete[/spoiler]



но ошибок на красном фоне все равно много
Cообщение объединено 19 Ноябрь 2016, 16:32:57

Код Выделить Развернуть


smartctl -H /dev/sd1
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sd1 failed: No such device



Нужно не

Код Выделить Развернуть

smartctl -H /dev/sd1 а

Код Выделить Развернуть

smartctl -H /dev/sda потому, что у вас

Код Выделить Развернуть

/dev/sda: 465,8 GiB

[phantom85]

Код Выделить Развернуть

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Please note the following marginal Attributes:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0022   060   044   045    Old_age   Always   In_the_past 40 (Min/Max 39/44 #1)


Код Выделить Развернуть

sudo smartctl --attributes -H /dev/sda1
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   111   099   034    Pre-fail  Always       -       34155792
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1883
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always       -       17479172962
  9 Power_On_Hours          0x0032   085   085   000    Old_age   Always       -       13187 (121 106 0)
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1813
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       2
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   059   044   045    Old_age   Always   In_the_past 41 (Min/Max 39/44 #1)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       483
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       176
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       219830
194 Temperature_Celsius     0x0022   041   056   000    Old_age   Always       -       41 (0 15 0 0 0)
196 Reallocated_Event_Count 0x000f   087   087   030    Pre-fail  Always       -       12213 (5910 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0


[Ogis1975]

Код Выделить Развернуть

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Please note the following marginal Attributes:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0022   060   044   045    Old_age   Always   In_the_past 40 (Min/Max 39/44 #1)


Код Выделить Развернуть

sudo smartctl --attributes -H /dev/sda1
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   111   099   034    Pre-fail  Always       -       34155792
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1883
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always       -       17479172962
  9 Power_On_Hours          0x0032   085   085   000    Old_age   Always       -       13187 (121 106 0)
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1813
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       2
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   059   044   045    Old_age   Always   In_the_past 41 (Min/Max 39/44 #1)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       483
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       176
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       219830
194 Temperature_Celsius     0x0022   041   056   000    Old_age   Always       -       41 (0 15 0 0 0)
196 Reallocated_Event_Count 0x000f   087   087   030    Pre-fail  Always       -       12213 (5910 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0


Я не вижу тут критических ошибок....тем более, что SMART пишет, что

Код Выделить Развернуть

SMART overall-health self-assessment test result: PASSED У вас какое окружение рабочего стола установлено?

[phantom85]

по умолчанию гном
Cообщение объединено 19 ноября 2016, 19:13:33
Ещё вопрос как мне установить драйвера видео карты?

Код Выделить Развернуть

lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8330]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 01)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 3a)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 5
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun PRO [Radeon HD 8570A/8570M]
02:00.0 Ethernet controller: Qualcomm Atheros QCA8172 Fast Ethernet (rev 10)
03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)


[Kato]

[ot]phantom85, один вопрос - одна тема[/ot]

[phantom85]

Ну тогда к старому вопросу dmesg показывает очень много ошибок вот такого рода

Код Выделить Развернуть

ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x6 frozen
[    6.567291] ata2.00: irq_stat 0x08000000, interface fatal error

Код Выделить Развернуть

[   43.571343] kvm: disabled by bios


Код Выделить Развернуть

[   81.095615] ata2: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen t4

Они я так понимаю тоже влияют на загрузку? Как от них избавиться?

[qupl]

phantom85, кстати, firmware установили?

[phantom85]

qupl, да поставил
sudo apt install firmware-linux-free firmware-linux-nonfree