Слетели дрова NVidia

seregareal2 · 05 марта 2017, 18:28:51

Открыть содержимое (спойлер)


[    0.124853] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbfc00000-0xbfdfffff 64bit pref]
[    0.124855] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.124858] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
[    0.124860] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.124861] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.124864] pci 0000:00:01.0:   bridge window [mem 0xf9000000-0xfaffffff]
[    0.124866] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[    0.124868] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.124870] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.124874] pci 0000:00:1c.0:   bridge window [mem 0xbfa00000-0xbfbfffff]
[    0.124878] pci 0000:00:1c.0:   bridge window [mem 0xbfc00000-0xbfdfffff 64bit pref]
[    0.124883] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.124885] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.124891] pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.124896] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.124919] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[    0.124930] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.124931] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.124932] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.124934] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.124935] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.124936] pci_bus 0000:00: resource 9 [mem 0xbfa00000-0xfebfffff]
[    0.124937] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.124939] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
[    0.124940] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
[    0.124942] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.124943] pci_bus 0000:02: resource 1 [mem 0xbfa00000-0xbfbfffff]
[    0.124944] pci_bus 0000:02: resource 2 [mem 0xbfc00000-0xbfdfffff 64bit pref]
[    0.124946] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.124947] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.124949] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.124950] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.124951] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.124952] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[    0.124954] pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.124955] pci_bus 0000:04: resource 9 [mem 0xbfa00000-0xfebfffff]
[    0.124956] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.124958] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.124959] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.124960] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    0.124961] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.124963] pci_bus 0000:05: resource 9 [mem 0xbfa00000-0xfebfffff]
[    0.124995] NET: Registered protocol family 2
[    0.125177] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.125259] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.125373] TCP: Hash tables configured (established 32768 bind 32768)
[    0.125393] TCP: reno registered
[    0.125399] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.125417] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.125473] NET: Registered protocol family 1
[    0.157619] pci 0000:01:00.0: Video device with shadowed ROM
[    0.157633] PCI: CLS 4 bytes, default 64
[    0.157678] Unpacking initramfs...
[    0.371696] Freeing initrd memory: 14672K (ffff880036348000 - ffff88003719c000)
[    0.371707] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.371709] software IO TLB [mem 0xb6f90000-0xbaf90000] (64MB) mapped at [ffff8800b6f90000-ffff8800baf8ffff]
[    0.371891] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.371926] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
[    0.371931] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
[    0.371979] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.372243] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.372291] audit: initializing netlink subsys (disabled)
[    0.372306] audit: type=2000 audit(1488726422.372:1): initialized
[    0.372665] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.372686] zbud: loaded
[    0.372821] VFS: Disk quotas dquot_6.5.2
[    0.372834] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.372876] msgmni has been set to 7759
[    0.373081] alg: No test for stdrng (krng)
[    0.373099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.373127] io scheduler noop registered
[    0.373129] io scheduler deadline registered
[    0.373156] io scheduler cfq registered (default)
[    0.373305] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.373344] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.373610] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.373623] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.373641] intel_idle: MWAIT substates: 0x1120
[    0.373642] intel_idle: v0.4 model 0x2A
[    0.373643] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.373727] GHES: HEST is not enabled!
[    0.373785] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.394189] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.394537] Linux agpgart interface v0.103
[    0.394618] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.427257] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    0.427258] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    0.677467] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.677680] mousedev: PS/2 mouse device common for all mice
[    0.677729] rtc_cmos 00:01: RTC can wake from S4
[    0.677913] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.677940] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.677952] Intel P-state driver initializing.
[    0.677961] Intel pstate controlling: cpu 0
[    0.678076] Intel pstate controlling: cpu 1
[    0.678120] ledtrig-cpu: registered to indicate activity on CPUs
[    0.678402] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.678404] AMD IOMMUv2 functionality not available on this system
[    0.678526] TCP: cubic registered
[    0.678617] NET: Registered protocol family 10
[    0.678881] mip6: Mobile IPv6
[    0.678887] NET: Registered protocol family 17
[    0.678897] mpls_gso: MPLS GSO support
[    0.679285] registered taskstats version 1
[    0.679901] rtc_cmos 00:01: setting system clock to 2017-03-05 15:07:02 UTC (1488726422)
[    0.679976] PM: Hibernation image not present or could not be loaded.
[    0.680930] Freeing unused kernel memory: 1208K (ffffffff818ee000 - ffffffff81a1c000)
[    0.680933] Write protecting the kernel read-only data: 8192k
[    0.681322] Freeing unused kernel memory: 884K (ffff880001523000 - ffff880001600000)
[    0.682038] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    0.694401] systemd-udevd[61]: starting version 215
[    0.694758] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.704410] ACPI: bus type USB registered
[    0.704444] usbcore: registered new interface driver usbfs
[    0.704458] usbcore: registered new interface driver hub
[    0.708974] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.708984] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.709244] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[    0.709506] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000678000, 90:2b:34:34:22:2e, XID 0c900800 IRQ 41
[    0.709509] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.710382] usbcore: registered new device driver usb
[    0.710858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.711020] ehci-pci: EHCI PCI platform driver
[    0.711172] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.711179] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.711194] ehci-pci 0000:00:1a.0: debug port 2
[    0.715107] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.715127] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.722413] SCSI subsystem initialized
[    0.723810] libata version 3.00 loaded.
[    0.725452] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.725502] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.725505] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.725507] usb usb1: Product: EHCI Host Controller
[    0.725509] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.725511] usb usb1: SerialNumber: 0000:00:1a.0
[    0.725853] hub 1-0:1.0: USB hub found
[    0.725864] hub 1-0:1.0: 2 ports detected
[    0.726659] ata_piix 0000:00:1f.2: version 2.13
[    0.726772] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.727592] scsi0 : ata_piix
[    0.727687] scsi1 : ata_piix
[    0.727742] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[    0.727747] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[    0.727845] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.728523] scsi2 : ata_piix
[    0.728698] scsi3 : ata_piix
[    0.728753] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    0.728756] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    0.728892] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.728899] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.728914] ehci-pci 0000:00:1d.0: debug port 2
[    0.732800] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.732817] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.741333] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.741425] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.741428] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.741430] usb usb2: Product: EHCI Host Controller
[    0.741432] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.741433] usb usb2: SerialNumber: 0000:00:1d.0
[    0.741610] hub 2-0:1.0: USB hub found
[    0.741618] hub 2-0:1.0: 2 ports detected
[    1.037250] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.064139] ata4: SATA link down (SStatus 0 SControl 300)
[    1.169572] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.169577] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.169976] hub 1-1:1.0: USB hub found
[    1.170022] hub 1-1:1.0: 6 ports detected
[    1.209279] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.217548] ata3.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[    1.217552] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.225612] ata3.00: configured for UDMA/133
[    1.281152] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.369155] tsc: Refined TSC clocksource calibration: 2993.200 MHz
[    1.413528] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.413533] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.413897] hub 2-1:1.0: USB hub found
[    1.413975] hub 2-1:1.0: 8 ports detected
[    1.485106] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.521173] ata1.00: SATA link down (SStatus 0 SControl 300)
[    1.521187] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.532200] ata2.00: SATA link down (SStatus 0 SControl 300)
[    1.532214] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.581439] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c077
[    1.581443] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.581446] usb 1-1.2: Product: USB Optical Mouse
[    1.581448] usb 1-1.2: Manufacturer: Logitech
[    1.583278] hidraw: raw HID events driver (C) Jiri Kosina
[    1.585439] usbcore: registered new interface driver usbhid
[    1.585442] usbhid: USB HID core driver
[    1.585954] ata1.01: HPA detected: current 312579695, native 312581808
[    1.585961] ata1.01: ATA-7: ST3160812AS, 3.AAE, max UDMA/133
[    1.585963] ata1.01: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.586363] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C077.0001/input/input1
[    1.586540] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    1.594773] ata2.01: HPA detected: current 488395055, native 488397168
[    1.594779] ata2.01: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
[    1.594781] ata2.01: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.652611] ata1.01: configured for UDMA/133
[    1.652818] scsi 0:0:1:0: Direct-Access     ATA      ST3160812AS      E    PQ: 0 ANSI: 5
[    1.653076] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[    1.654682] sd 0:0:1:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[    1.654855] sd 0:0:1:0: [sda] Write Protect is off
[    1.654861] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.654920] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.661353] ata2.01: configured for UDMA/133
[    1.661533] scsi 1:0:1:0: Direct-Access     ATA      ST3250620AS      C    PQ: 0 ANSI: 5
[    1.661989] sd 1:0:1:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[    1.662040] sd 1:0:1:0: [sdb] Write Protect is off
[    1.662043] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.662064] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.662136] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[    1.662323] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.662326] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    1.662372] sd 2:0:0:0: [sdc] Write Protect is off
[    1.662375] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.662396] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.663018] sd 0:0:1:0: Attached scsi generic sg0 type 0
[    1.663065] sd 1:0:1:0: Attached scsi generic sg1 type 0
[    1.663153] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.677066]  sdc: sdc1 sdc2
[    1.677827] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.701892]  sdb: sdb1 sdb2
[    1.702231] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.724659]  sda: sda1 sda2 < sda5 >
[    1.725205] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.751084] usb 1-1.3: New USB device found, idVendor=1c4f, idProduct=0055
[    1.751090] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.751092] usb 1-1.3: Product: USB Keyboard
[    1.751105] usb 1-1.3: Manufacturer: SIGMACHIP
[    1.754313] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1C4F:0055.0002/input/input2
[    1.754390] hid-generic 0003:1C4F:0055.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[    1.758183] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0055.0003/input/input3
[    1.758241] hid-generic 0003:1C4F:0055.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.3/input1
[    1.828983] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    1.922907] usb 2-1.1: New USB device found, idVendor=058f, idProduct=6362
[    1.922912] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.922915] usb 2-1.1: Product: Mass Storage Device
[    1.922917] usb 2-1.1: Manufacturer: Generic
[    1.922929] usb 2-1.1: SerialNumber: 058F63626376
[    1.924476] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[    1.924622] scsi4 : usb-storage 2-1.1:1.0
[    1.924711] usbcore: registered new interface driver usb-storage
[    2.369067] Switched to clocksource tsc
[    2.921412] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.922039] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.922639] scsi 4:0:0:2: Direct-Access     Generic  USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[    2.923264] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.923595] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.923811] sd 4:0:0:1: Attached scsi generic sg4 type 0
[    2.924025] sd 4:0:0:2: Attached scsi generic sg5 type 0
[    2.924251] sd 4:0:0:3: Attached scsi generic sg6 type 0
[    2.951820] sd 4:0:0:1: [sde] Attached SCSI removable disk
[    2.952443] sd 4:0:0:2: [sdf] Attached SCSI removable disk
[    2.953692] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[    2.954317] sd 4:0:0:3: [sdg] Attached SCSI removable disk
[    3.740401] floppy0: no floppy controllers found
[    3.740413] work still pending
[    3.772903] PM: Starting manual resume from disk
[    3.772909] PM: Hibernation image partition 8:5 present
[    3.772911] PM: Looking for hibernation image.
[    3.773165] PM: Image not found (code -22)
[    3.773169] PM: Hibernation image not present or could not be loaded.
[    3.928635] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.032863] random: nonblocking pool is initialized
[    4.810970] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    4.811136] systemd[1]: Detected architecture 'x86-64'.
[    4.967119] systemd[1]: Inserted module 'autofs4'
[    4.979906] systemd[1]: Set hostname to <debian>.
[    7.298426] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.298501] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.298515] systemd[1]: Starting Remote File Systems (Pre).
[    7.298544] systemd[1]: Reached target Remote File Systems (Pre).
[    7.298571] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.298664] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.298680] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.298712] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.298724] systemd[1]: Starting Encrypted Volumes.
[    7.298735] systemd[1]: Reached target Encrypted Volumes.
[    7.298746] systemd[1]: Expecting device dev-disk-by\x2duuid-9ef4afab\x2d0abb\x2d4653\x2dbdc4\x2d9a62981f9f9c.device...
[    7.298756] systemd[1]: Expecting device dev-disk-by\x2duuid-5E32EA3532EA1237.device...
[    7.298766] systemd[1]: Expecting device dev-disk-by\x2duuid-7AA27602A275C365.device...
[    7.298776] systemd[1]: Starting Root Slice.
[    7.298805] systemd[1]: Created slice Root Slice.
[    7.298816] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.298858] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.298869] systemd[1]: Starting Delayed Shutdown Socket.
[    7.298895] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.298905] systemd[1]: Starting Journal Socket (/dev/log).
[    7.298937] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.298948] systemd[1]: Starting User and Session Slice.
[    7.299052] systemd[1]: Created slice User and Session Slice.
[    7.299067] systemd[1]: Starting udev Control Socket.
[    7.299093] systemd[1]: Listening on udev Control Socket.
[    7.299105] systemd[1]: Starting udev Kernel Socket.
[    7.299126] systemd[1]: Listening on udev Kernel Socket.
[    7.299139] systemd[1]: Starting Journal Socket.
[    7.299170] systemd[1]: Listening on Journal Socket.
[    7.299192] systemd[1]: Starting System Slice.
[    7.299290] systemd[1]: Created slice System Slice.
[    7.299318] systemd[1]: Starting Increase datagram queue length...
[    7.348631] systemd[1]: Started Set Up Additional Binary Formats.
[    7.348658] systemd[1]: Mounting POSIX Message Queue File System...
[    7.349113] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.349548] systemd[1]: Starting udev Coldplug all Devices...
[    7.365244] systemd[1]: Starting Load Kernel Modules...
[    7.365755] systemd[1]: Mounting Huge Pages File System...
[    7.366225] systemd[1]: Mounting Debug File System...
[    7.366632] systemd[1]: Starting system-tor.slice.
[    7.366733] systemd[1]: Created slice system-tor.slice.
[    7.366760] systemd[1]: Starting system-getty.slice.
[    7.366857] systemd[1]: Created slice system-getty.slice.
[    7.366884] systemd[1]: Started File System Check on Root Device.
[    7.366905] systemd[1]: Starting Slices.
[    7.366917] systemd[1]: Reached target Slices.
[    7.498329] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.498751] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.543276] systemd[1]: Started udev Coldplug all Devices.
[    8.113659] systemd[1]: Mounted Huge Pages File System.
[    8.113704] systemd[1]: Mounted POSIX Message Queue File System.
[    8.113870] systemd[1]: Mounted Debug File System.
[    8.114202] systemd[1]: Started Increase datagram queue length.
[    8.120351] systemd[1]: Starting Syslog Socket.
[    8.120396] systemd[1]: Listening on Syslog Socket.
[    8.120413] systemd[1]: Starting Journal Service...
[    8.120968] systemd[1]: Started Journal Service.
[    8.148246] lp: driver loaded but no devices found
[    8.279349] ppdev: user-space parallel port driver
[    8.329282] parport_pc 00:03: reported by Plug and Play ACPI
[    8.329336] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    8.423118] lp0: using parport0 (interrupt-driven).
[    8.437693] systemd-udevd[178]: starting version 215
[    8.646945] fuse init (API version 7.23)
[   10.385536] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[   10.385552] ACPI: Power Button [PWRB]
[   10.385610] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   10.385612] ACPI: Power Button [PWRF]
[   10.434439] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.568163] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.078867] [drm] Initialized drm 1.1.0 20060810
[   11.110481] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   11.127099] snd_hda_intel 0000:01:00.1: Disabling MSI
[   11.127107] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   11.127370] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   11.183225] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20140424/utaddress-254)
[   11.183233] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.183258] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.221974] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   11.221987] sound hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.221989] sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.221990] sound hdaudioC0D2:    mono: mono_out=0x0
[   11.221992] sound hdaudioC0D2:    dig-out=0x11/0x1e
[   11.221993] sound hdaudioC0D2:    inputs:
[   11.221996] sound hdaudioC0D2:      Rear Mic=0x18
[   11.221998] sound hdaudioC0D2:      Front Mic=0x19
[   11.222000] sound hdaudioC0D2:      Line=0x1a
[   11.222002] sound hdaudioC0D2:      CD=0x1c
[   11.302462] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[   11.308844] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   11.476143] iTCO_vendor_support: vendor-support=0
[   11.485591] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.485620] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   11.549309] alg: No test for crc32 (crc32-pclmul)
[   11.594058] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input6
[   11.594845] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.594908] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.594969] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.595029] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.595089] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.688749] wmi: Mapper loaded
[   11.906350] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   11.906428] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   11.906500] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   11.906570] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   12.333831] [drm] Memory usable by graphics device = 2048M
[   12.333836] [drm] Replacing VGA console driver
[   12.334804] Console: switching to colour dummy device 80x25
[   12.357690] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[   12.357705] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.357706] [drm] Driver supports precise vblank timestamp query.
[   12.357725] [drm:i915_stolen_to_physical] *ERROR* conflict detected with stolen region: [0xbba00000 - 0xbfa00000]
[   12.362318] [drm] Wrong MCH_SSKPD value: 0x16040307
[   12.362321] [drm] This can cause pipe underruns and display issues.
[   12.362322] [drm] Please upgrade your BIOS to fix this.
[   12.433599] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[   12.456950] Console: switching to colour frame buffer device 128x48
[   12.458978] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   12.458980] i915 0000:00:02.0: registered panic notifier
[   12.469644] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   12.469792] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0a8280b1
[   12.469794] nouveau  [  DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[   12.469796] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[   12.469822] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   12.486077] intel_rapl: Found RAPL domain package
[   12.486081] intel_rapl: Found RAPL domain core
[   12.486082] intel_rapl: Found RAPL domain uncore
[   12.534711] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   12.534713] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[   12.534814] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   12.534816] nouveau  [   VBIOS][0000:01:00.0] version 70.18.5f.00.06
[   12.535102] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[   12.535109] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   12.535134] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[   12.535136] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[   12.535137] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 960 tags
[   12.536347] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[   13.505265] floppy0: no floppy controllers found
[   13.505277] work still pending
[   13.813194] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   13.813197] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   13.813204] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   13.813206] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   13.813222] nouveau  [     CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[   13.813224] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[   13.813227] nouveau  [     CLK][0000:01:00.0] 0f: core 589 MHz shader 1402 MHz memory 600 MHz
[   13.813242] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[   13.813344] [TTM] Zone  kernel: Available graphics memory: 1987694 kiB
[   13.813346] [TTM] Initializing pool allocator
[   13.813350] [TTM] Initializing DMA pool allocator
[   13.813358] nouveau  [     DRM] VRAM: 1024 MiB
[   13.813359] nouveau  [     DRM] GART: 1048576 MiB
[   13.813362] nouveau  [     DRM] TMDS table version 2.0
[   13.813363] nouveau  [     DRM] DCB version 4.0
[   13.813364] nouveau  [     DRM] DCB outp 00: 01000302 00020030
[   13.813366] nouveau  [     DRM] DCB outp 01: 02000300 00000000
[   13.813367] nouveau  [     DRM] DCB outp 02: 02011362 00020010
[   13.813368] nouveau  [     DRM] DCB outp 03: 01022310 00000000
[   13.813369] nouveau  [     DRM] DCB conn 00: 00001030
[   13.813371] nouveau  [     DRM] DCB conn 01: 00002161
[   13.813372] nouveau  [     DRM] DCB conn 02: 00000200
[   13.825200] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.825202] [drm] Driver supports precise vblank timestamp query.
[   13.838120] nouveau  [     DRM] MM: using COPY for buffer copies
[   13.895519] Raw EDID:
[   13.895535]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.895554]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.895572]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.895590]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.895608]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.895626]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.895644]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.895662]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.895683] nouveau 0000:01:00.0: VGA-2: EDID block 0 invalid.
[   13.895684] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   13.909388] nouveau  [     DRM] allocated 1024x768 fb: 0x70000, bo ffff8800b63f0c00
[   13.909461] fbcon: nouveaufb (fb1) is primary device
[   13.909462] fbcon: Remapping primary device, fb1, to tty 1-63
[   14.059974] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[   14.059977] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 1
[   14.817334] Adding 6369276k swap on /dev/sda5.  Priority:-1 extents:1 across:6369276k FS
[   15.220507] systemd-journald[174]: Received request to flush runtime journal from PID 1
[   16.743781] RPC: Registered named UNIX socket transport module.
[   16.743785] RPC: Registered udp transport module.
[   16.743786] RPC: Registered tcp transport module.
[   16.743788] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.770145] FS-Cache: Loaded
[   16.799452] FS-Cache: Netfs 'nfs' registered for caching
[   16.857796] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.179872] vboxdrv: Found 2 processor cores.
[   18.180024] vboxdrv: fAsync=0 offMin=0x66c offMax=0x122a
[   18.180099] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   18.180100] vboxdrv: Successfully loaded version 4.3.36_Debian (interface 0x001a000b).
[   19.109946] vboxpci: IOMMU not found (not registered)
[   26.317574] cfg80211: Calling CRDA to update world regulatory domain
[   26.419604] cfg80211: World regulatory domain updated:
[   26.419609] cfg80211:  DFS Master region: unset
[   26.419611] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   26.419614] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   26.419617] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   26.419619] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   26.419622] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   26.419625] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   26.419627] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   26.419629] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   26.419632] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   28.707286] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[   28.707306] r8169 0000:03:00.0: Direct firmware load failed with error -2
[   28.707308] r8169 0000:03:00.0: Falling back to user helper
[   28.707875] r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-12)
[   28.722503] r8169 0000:03:00.0 eth0: link down
[   28.722521] r8169 0000:03:00.0 eth0: link down
[   28.722558] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.371823] r8169 0000:03:00.0 eth0: link up
[   30.371836] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   31.945283] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   32.036710] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   43.384590] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   43.712830] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   54.168782] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   54.252392] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   64.051730] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   64.127565] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   64.238173] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   66.924971] nouveau E[     DRM] DDC responded, but no EDID for VGA-2
[   84.805676] Bluetooth: Core ver 2.19
[   84.805703] NET: Registered protocol family 31
[   84.805705] Bluetooth: HCI device and connection manager initialized
[   84.805713] Bluetooth: HCI socket layer initialized
[   84.805716] Bluetooth: L2CAP socket layer initialized
[   84.805732] Bluetooth: SCO socket layer initialized
[   85.117652] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   85.117656] Bluetooth: BNEP filters: protocol multicast
[   85.117665] Bluetooth: BNEP socket layer initialized
root@debian:~#

[свернуть]

Открыть содержимое (спойлер)

Код Выделить


root@debian:~# sudo lshw -c video | grep configuration
       configuration: driver=nouveau latency=0
       configuration: driver=i915 latency=0
root@debian:~# sudo lshw -c video
  *-display               
       description: VGA compatible controller
       product: GT218 [GeForce 210]
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:01:00.0
       version: a2
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nouveau latency=0
       resources: irq:45 memory:f9000000-f9ffffff memory:d0000000-dfffffff memory:ee000000-efffffff ioport:df00(size=128) memory:fa000000-fa07ffff
  *-display
       description: Display controller
       product: 2nd Generation Core Processor Family Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 09
       width: 64 bits
       clock: 33MHz
       capabilities: msi pm bus_master cap_list
       configuration: driver=i915 latency=0
       resources: irq:44 memory:fb800000-fbbfffff memory:c0000000-cfffffff ioport:ff00(size=64)
root@debian:~# 
root@debian:~# sudo lspci -v -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device 83f4
	Flags: bus master, fast devsel, latency 0, IRQ 45
	Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Memory at ee000000 (64-bit, prefetchable) [size=32M]
	I/O ports at df00 [size=128]
	[virtual] Expansion ROM at fa000000 [disabled] [size=512K]
	Capabilities: [60] Power Management version 3
	Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [78] Express Endpoint, MSI 00
	Capabilities: [b4] Vendor Specific Information: Len=14 <?>
	Capabilities: [100] Virtual Channel
	Capabilities: [128] Power Budgeting <?>
	Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
	Kernel driver in use: nouveau

root@debian:~#

[свернуть]

ecc83 · 05 марта 2017, 18:52:02

Цитата: seregareal2 от 05 марта 2017, 18:28:51
Слетели дрова NVidia

Сделай бекап системы с помощью clonezilla, затем скопируй в текстовый файл этот скрипт.
Назови его например nvidia-drv.
Потом сделай его исполняемым:

Код Выделить

chmod +x nvidia-drv

Выйди из иксов в консоль Ctrl-Alt-F1 и запусти скрипт как root.
Сначала выбери пункт [1], после перезагрузки запусти скрипт снова и выберешь пункт [2].

Открыть содержимое (спойлер)

#!/bin/sh
RED="\033[5m\033[1;31m"
GRE="\033[5m\033[1;32m"
YELLOW="\033[1;33m"
NC="\033[25m\033[0m"
clear
echo Запускать только от $GRE'ROOT'$NC !!!
echo ""
echo "[$YELLOW"1"$NC] - Отключить свободный драйвер nouveau"
echo "[$YELLOW"2"$NC] - Установить или восстановить драйвер NVIDIA"
echo "[$YELLOW"Q"$NC] - Выйти без изменений"
echo ""
echo -n "Выбор: "
read item
case "$item" in
1)
   echo "blacklist nouveau" > /etc/modprobe.d/nvidia-disable-nouveau.conf
   echo "alias nvidia nvidia_current_updates" >> /etc/modprobe.d/nvidia-disable-nouveau.conf
   echo "alias nouveau off" >> /etc/modprobe.d/nvidia-disable-nouveau.conf
   echo "alias lbm-nouveau off" >> /etc/modprobe.d/nvidia-disable-nouveau.conf
   echo "options nouveau modeset=0" >> /etc/modprobe.d/nvidia-disable-nouveau.conf
sed -i 's/GRUB_CMDLINE_LINUX_DEFAULT=\"$.*$\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1 nomodeset\"/' /etc/default/grub
   clear && update-grub
   echo ""
   echo -n "Необходима перезагрузка. $GREПродолжить? (Y/n)$NC "
   read item
   case "$item" in
n|N) echo "$REDОперация прервана!$NC"
exit 0
;;
*) reboot
;;
esac
   exit 0
;;
2) clear && apt-get update
   apt-get install dkms
   cd /usr/local/bin && wget -Nc smxi.org/sgfxi && chmod +x sgfxi && clear && sgfxi
   echo "$GREПерезагрузка ...$NC" && sleep 1 && reboot
   exit 0
;;
q|Q) clear
   exit 0
;;
*) clear && echo "$REDОперация прервана!$NC"
   exit 0
;;
esac

[свернуть]

seregareal2 · 06 марта 2017, 18:49:01

Все сделал
Ничего не изменилось
Максимум 1024 на 768

Открыть содержимое (спойлер)

[ 0.124846] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfaffffff]
[ 0.124848] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.124851] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.124853] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.124857] pci 0000:00:1c.0: bridge window [mem 0xbfa00000-0xbfbfffff]
[ 0.124860] pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfdfffff 64bit pref]
[ 0.124865] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.124867] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.124874] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[ 0.124879] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.124902] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.124912] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.124914] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.124915] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.124916] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.124917] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.124919] pci_bus 0000:00: resource 9 [mem 0xbfa00000-0xfebfffff]
[ 0.124920] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.124921] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
[ 0.124923] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.124924] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.124925] pci_bus 0000:02: resource 1 [mem 0xbfa00000-0xbfbfffff]
[ 0.124927] pci_bus 0000:02: resource 2 [mem 0xbfc00000-0xbfdfffff 64bit pref]
[ 0.124928] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.124929] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
[ 0.124931] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.124932] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.124933] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.124935] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.124936] pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.124937] pci_bus 0000:04: resource 9 [mem 0xbfa00000-0xfebfffff]
[ 0.124938] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.124940] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.124941] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.124942] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.124943] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.124945] pci_bus 0000:05: resource 9 [mem 0xbfa00000-0xfebfffff]
[ 0.124978] NET: Registered protocol family 2
[ 0.125160] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.125242] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.125355] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.125376] TCP: reno registered
[ 0.125381] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.125399] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.125454] NET: Registered protocol family 1
[ 0.157598] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.157612] PCI: CLS 4 bytes, default 64
[ 0.157657] Unpacking initramfs...
[ 0.371758] Freeing initrd memory: 14672K (ffff880036348000 - ffff88003719c000)
[ 0.371769] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.371771] software IO TLB [mem 0xb6f90000-0xbaf90000] (64MB) mapped at [ffff8800b6f90000-ffff8800baf8ffff]
[ 0.371955] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.371988] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
[ 0.371994] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
[ 0.372047] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.372313] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.372362] audit: initializing netlink subsys (disabled)
[ 0.372381] audit: type=2000 audit(1488815096.372:1): initialized
[ 0.372745] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.372763] zbud: loaded
[ 0.372898] VFS: Disk quotas dquot_6.5.2
[ 0.372912] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.372958] msgmni has been set to 7759
[ 0.373166] alg: No test for stdrng (krng)
[ 0.373183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.373212] io scheduler noop registered
[ 0.373214] io scheduler deadline registered
[ 0.373240] io scheduler cfq registered (default)
[ 0.373386] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.373439] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.373643] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.373657] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.373674] intel_idle: MWAIT substates: 0x1120
[ 0.373675] intel_idle: v0.4 model 0x2A
[ 0.373676] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.373758] GHES: HEST is not enabled!
[ 0.373815] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.394209] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.394671] Linux agpgart interface v0.103
[ 0.394752] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.427854] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.427854] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 0.677426] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.677638] mousedev: PS/2 mouse device common for all mice
[ 0.677686] rtc_cmos 00:01: RTC can wake from S4
[ 0.677870] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.677898] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.677909] Intel P-state driver initializing.
[ 0.677918] Intel pstate controlling: cpu 0
[ 0.678034] Intel pstate controlling: cpu 1
[ 0.678077] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.678363] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.678365] AMD IOMMUv2 functionality not available on this system
[ 0.678486] TCP: cubic registered
[ 0.678578] NET: Registered protocol family 10
[ 0.678843] mip6: Mobile IPv6
[ 0.678849] NET: Registered protocol family 17
[ 0.678859] mpls_gso: MPLS GSO support
[ 0.679231] registered taskstats version 1
[ 0.679848] rtc_cmos 00:01: setting system clock to 2017-03-06 15:44:56 UTC (1488815096)
[ 0.679922] PM: Hibernation image not present or could not be loaded.
[ 0.680890] Freeing unused kernel memory: 1208K (ffffffff818ee000 - ffffffff81a1c000)
[ 0.680892] Write protecting the kernel read-only data: 8192k
[ 0.681285] Freeing unused kernel memory: 884K (ffff880001523000 - ffff880001600000)
[ 0.681996] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 0.694413] systemd-udevd[61]: starting version 215
[ 0.694759] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.704381] ACPI: bus type USB registered
[ 0.704414] usbcore: registered new interface driver usbfs
[ 0.704428] usbcore: registered new interface driver hub
[ 0.708994] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.709006] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.709258] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[ 0.709517] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000678000, 90:2b:34:34:22:2e, XID 0c900800 IRQ 41
[ 0.709520] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.710401] usbcore: registered new device driver usb
[ 0.710871] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.711034] ehci-pci: EHCI PCI platform driver
[ 0.711183] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.711192] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.711207] ehci-pci 0000:00:1a.0: debug port 2
[ 0.715096] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[ 0.715117] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[ 0.722064] SCSI subsystem initialized
[ 0.723783] libata version 3.00 loaded.
[ 0.725454] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.725502] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.725505] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725507] usb usb1: Product: EHCI Host Controller
[ 0.725509] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.725511] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.725829] hub 1-0:1.0: USB hub found
[ 0.725838] hub 1-0:1.0: 2 ports detected
[ 0.726074] ata_piix 0000:00:1f.2: version 2.13
[ 0.726184] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.729401] scsi0 : ata_piix
[ 0.729613] scsi1 : ata_piix
[ 0.729673] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[ 0.729678] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[ 0.729787] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.730545] scsi2 : ata_piix
[ 0.730755] scsi3 : ata_piix
[ 0.730811] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[ 0.730814] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[ 0.731066] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.731074] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.731091] ehci-pci 0000:00:1d.0: debug port 2
[ 0.734986] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[ 0.735220] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[ 0.745309] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.745386] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.745389] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745391] usb usb2: Product: EHCI Host Controller
[ 0.745392] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.745394] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.745569] hub 2-0:1.0: USB hub found
[ 0.745578] hub 2-0:1.0: 2 ports detected
[ 1.037238] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.064108] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.169599] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.169603] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.169976] hub 1-1:1.0: USB hub found
[ 1.170016] hub 1-1:1.0: 6 ports detected
[ 1.209217] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.217522] ata3.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 1.217527] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.225596] ata3.00: configured for UDMA/133
[ 1.281137] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.369132] tsc: Refined TSC clocksource calibration: 2993.200 MHz
[ 1.413482] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.413487] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.413903] hub 2-1:1.0: USB hub found
[ 1.414105] hub 2-1:1.0: 8 ports detected
[ 1.485106] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[ 1.525125] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.525139] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.536171] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.536184] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.581168] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c077
[ 1.581183] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.581185] usb 1-1.2: Product: USB Optical Mouse
[ 1.581187] usb 1-1.2: Manufacturer: Logitech
[ 1.582838] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.584918] usbcore: registered new interface driver usbhid
[ 1.584920] usbhid: USB HID core driver
[ 1.585762] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C077.0001/input/input1
[ 1.586006] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 1.591420] ata1.01: HPA detected: current 312579695, native 312581808
[ 1.591427] ata1.01: ATA-7: ST3160812AS, 3.AAE, max UDMA/133
[ 1.591430] ata1.01: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.596458] ata2.01: HPA detected: current 488395055, native 488397168
[ 1.596464] ata2.01: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
[ 1.596466] ata2.01: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.653040] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[ 1.658065] ata1.01: configured for UDMA/133
[ 1.658356] scsi 0:0:1:0: Direct-Access ATA ST3160812AS E PQ: 0 ANSI: 5
[ 1.663046] ata2.01: configured for UDMA/133
[ 1.663243] scsi 1:0:1:0: Direct-Access ATA ST3250620AS C PQ: 0 ANSI: 5
[ 1.663617] scsi 2:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 1.666187] sd 1:0:1:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[ 1.666205] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.666208] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.666237] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.666240] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.666257] sd 0:0:1:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[ 1.666262] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.666269] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.666272] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.666315] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.666324] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 1.666397] sd 0:0:1:0: [sda] Write Protect is off
[ 1.666399] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.666420] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.666574] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 1.666766] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.680937] sdc: sdc1 sdc2
[ 1.681396] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.703631] sdb: sdb1 sdb2
[ 1.703896] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.729833] sda: sda1 sda2 < sda5 >
[ 1.730267] sd 0:0:1:0: [sda] Attached SCSI disk
[ 1.751234] usb 1-1.3: New USB device found, idVendor=1c4f, idProduct=0055
[ 1.751239] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.751241] usb 1-1.3: Product: USB Keyboard
[ 1.751243] usb 1-1.3: Manufacturer: SIGMACHIP
[ 1.754435] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1C4F:0055.0002/input/input2
[ 1.754525] hid-generic 0003:1C4F:0055.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[ 1.758423] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0055.0003/input/input3
[ 1.758483] hid-generic 0003:1C4F:0055.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.3/input1
[ 1.828993] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.922895] usb 2-1.1: New USB device found, idVendor=058f, idProduct=6362
[ 1.922900] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.922902] usb 2-1.1: Product: Mass Storage Device
[ 1.922915] usb 2-1.1: Manufacturer: Generic
[ 1.922917] usb 2-1.1: SerialNumber: 058F63626376
[ 1.924407] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 1.924564] scsi4 : usb-storage 2-1.1:1.0
[ 1.924648] usbcore: registered new interface driver usb-storage
[ 2.368990] Switched to clocksource tsc
[ 2.921367] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.922028] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.922653] scsi 4:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.923253] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.923576] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.923769] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 2.923964] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 2.924170] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 2.951435] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[ 2.952057] sd 4:0:0:1: [sde] Attached SCSI removable disk
[ 2.953311] sd 4:0:0:3: [sdg] Attached SCSI removable disk
[ 2.954557] sd 4:0:0:2: [sdf] Attached SCSI removable disk
[ 3.740378] floppy0: no floppy controllers found
[ 3.740391] work still pending
[ 3.773205] PM: Starting manual resume from disk
[ 3.773211] PM: Hibernation image partition 8:5 present
[ 3.773213] PM: Looking for hibernation image.
[ 3.773498] PM: Image not found (code -22)
[ 3.773502] PM: Hibernation image not present or could not be loaded.
[ 3.858374] random: nonblocking pool is initialized
[ 3.950663] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.849692] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 4.849849] systemd[1]: Detected architecture 'x86-64'.
[ 5.047546] systemd[1]: Inserted module 'autofs4'
[ 5.076976] systemd[1]: Set hostname to <debian>.
[ 7.512146] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.512220] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.512233] systemd[1]: Starting Remote File Systems (Pre).
[ 7.512260] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.512285] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.512369] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.512384] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.512416] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.512428] systemd[1]: Starting Encrypted Volumes.
[ 7.512438] systemd[1]: Reached target Encrypted Volumes.
[ 7.512448] systemd[1]: Expecting device dev-disk-by\x2duuid-9ef4afab\x2d0abb\x2d4653\x2dbdc4\x2d9a62981f9f9c.device...
[ 7.512458] systemd[1]: Expecting device dev-disk-by\x2duuid-5E32EA3532EA1237.device...
[ 7.512468] systemd[1]: Expecting device dev-disk-by\x2duuid-7AA27602A275C365.device...
[ 7.512477] systemd[1]: Starting Root Slice.
[ 7.512504] systemd[1]: Created slice Root Slice.
[ 7.512514] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.512554] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.512564] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.512589] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.512599] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.512628] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.512639] systemd[1]: Starting User and Session Slice.
[ 7.512737] systemd[1]: Created slice User and Session Slice.
[ 7.512752] systemd[1]: Starting udev Control Socket.
[ 7.512777] systemd[1]: Listening on udev Control Socket.
[ 7.512789] systemd[1]: Starting udev Kernel Socket.
[ 7.512810] systemd[1]: Listening on udev Kernel Socket.
[ 7.512823] systemd[1]: Starting Journal Socket.
[ 7.512852] systemd[1]: Listening on Journal Socket.
[ 7.512873] systemd[1]: Starting System Slice.
[ 7.512957] systemd[1]: Created slice System Slice.
[ 7.512986] systemd[1]: Starting Increase datagram queue length...
[ 7.562244] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.562272] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.562727] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.563183] systemd[1]: Starting udev Coldplug all Devices...
[ 7.578870] systemd[1]: Starting Load Kernel Modules...
[ 7.579360] systemd[1]: Mounting Huge Pages File System...
[ 7.579848] systemd[1]: Mounting Debug File System...
[ 7.580272] systemd[1]: Starting system-tor.slice.
[ 7.580378] systemd[1]: Created slice system-tor.slice.
[ 7.580406] systemd[1]: Starting system-getty.slice.
[ 7.580513] systemd[1]: Created slice system-getty.slice.
[ 7.580537] systemd[1]: Started File System Check on Root Device.
[ 7.580559] systemd[1]: Starting Slices.
[ 7.580570] systemd[1]: Reached target Slices.
[ 7.711881] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.712314] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.751863] systemd[1]: Started udev Coldplug all Devices.
[ 8.335657] systemd[1]: Mounted Debug File System.
[ 8.335706] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.335881] systemd[1]: Mounted Huge Pages File System.
[ 8.336190] systemd[1]: Started Increase datagram queue length.
[ 8.336537] systemd[1]: Starting Syslog Socket.
[ 8.336581] systemd[1]: Listening on Syslog Socket.
[ 8.336599] systemd[1]: Starting Journal Service...
[ 8.337147] systemd[1]: Started Journal Service.
[ 8.370189] lp: driver loaded but no devices found
[ 8.476607] ppdev: user-space parallel port driver
[ 8.517746] parport_pc 00:03: reported by Plug and Play ACPI
[ 8.517798] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.615126] lp0: using parport0 (interrupt-driven).
[ 8.702361] fuse init (API version 7.23)
[ 8.876219] systemd-udevd[182]: starting version 215
[ 10.630383] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.915529] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 10.915537] ACPI: Power Button [PWRB]
[ 10.915620] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 10.915623] ACPI: Power Button [PWRF]
[ 11.055290] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20140424/utaddress-254)
[ 11.055298] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.055323] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.065835] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 11.074605] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 11.089746] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.139424] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 11.350653] [drm] Initialized drm 1.1.0 20060810
[ 11.848694] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 11.848703] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 11.849059] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 12.022979] iTCO_vendor_support: vendor-support=0
[ 12.049011] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.049046] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 12.118490] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 12.118494] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.118496] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.118498] sound hdaudioC0D2: mono: mono_out=0x0
[ 12.118500] sound hdaudioC0D2: dig-out=0x11/0x1e
[ 12.118501] sound hdaudioC0D2: inputs:
[ 12.118504] sound hdaudioC0D2: Rear Mic=0x18
[ 12.118506] sound hdaudioC0D2: Front Mic=0x19
[ 12.118508] sound hdaudioC0D2: Line=0x1a
[ 12.118510] sound hdaudioC0D2: CD=0x1c
[ 12.198530] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input7
[ 12.198843] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 12.198907] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.198968] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.199030] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.199092] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.437422] alg: No test for crc32 (crc32-pclmul)
[ 12.618363] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 12.618486] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 12.618587] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 12.618674] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 12.691416] intel_rapl: Found RAPL domain package
[ 12.691421] intel_rapl: Found RAPL domain core
[ 12.691424] intel_rapl: Found RAPL domain uncore
[ 13.697239] floppy0: no floppy controllers found
[ 14.622700] Adding 6369276k swap on /dev/sda5. Priority:-1 extents:1 across:6369276k FS
[ 15.187002] systemd-journald[171]: Received request to flush runtime journal from PID 1
[ 16.657225] RPC: Registered named UNIX socket transport module.
[ 16.657229] RPC: Registered udp transport module.
[ 16.657231] RPC: Registered tcp transport module.
[ 16.657232] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.683911] FS-Cache: Loaded
[ 16.713184] FS-Cache: Netfs 'nfs' registered for caching
[ 16.763032] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.085302] vboxdrv: Found 2 processor cores.
[ 18.085813] vboxdrv: fAsync=0 offMin=0x6de offMax=0x4584
[ 18.085893] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 18.085896] vboxdrv: Successfully loaded version 4.3.36_Debian (interface 0x001a000b).
[ 19.956436] vboxpci: IOMMU not found (not registered)
[ 25.890173] cfg80211: Calling CRDA to update world regulatory domain
[ 27.888324] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[ 27.888416] r8169 0000:03:00.0: Direct firmware load failed with error -2
[ 27.888418] r8169 0000:03:00.0: Falling back to user helper
[ 27.889026] r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-12)
[ 27.902741] r8169 0000:03:00.0 eth0: link down
[ 27.902758] r8169 0000:03:00.0 eth0: link down
[ 27.902856] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.050124] cfg80211: World regulatory domain updated:
[ 28.050130] cfg80211: DFS Master region: unset
[ 28.050131] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 28.050135] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 28.050138] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 28.050140] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 28.050143] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 28.050146] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 28.050148] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 28.050150] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 28.050152] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 29.542597] r8169 0000:03:00.0 eth0: link up
[ 29.542609] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 169.927592] Bluetooth: Core ver 2.19
[ 169.927617] NET: Registered protocol family 31
[ 169.927619] Bluetooth: HCI device and connection manager initialized
[ 169.927627] Bluetooth: HCI socket layer initialized
[ 169.927630] Bluetooth: L2CAP socket layer initialized
[ 169.927645] Bluetooth: SCO socket layer initialized
[ 170.156396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 170.156401] Bluetooth: BNEP filters: protocol multicast
[ 170.156420] Bluetooth: BNEP socket layer initialized

[свернуть]

Открыть содержимое (спойлер)

sudo lshw -c video | grep configuration
configuration: latency=0
configuration: latency=0
root@debian:~#

root@debian:~# sudo lshw -c video
*-display UNCLAIMED
description: VGA compatible controller
product: GT218 [GeForce 210]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a2
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list
configuration: latency=0
resources: memory:f9000000-f9ffffff memory:d0000000-dfffffff memory:ee000000-efffffff ioport:df00(size=128) memory:fa000000-fa07ffff
*-display UNCLAIMED
description: Display controller
product: 2nd Generation Core Processor Family Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: msi pm bus_master cap_list
configuration: latency=0
resources: memory:fb800000-fbbfffff memory:c0000000-cfffffff ioport:ff00(size=64)
root@debian:~#

root@debian:~# sudo lspci -v -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) (prog-if 00 [VGA controller])
   Subsystem: ASUSTeK Computer Inc. Device 83f4
   Flags: bus master, fast devsel, latency 0, IRQ 12
   Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
   Memory at d0000000 (64-bit, prefetchable) [size=256M]
   Memory at ee000000 (64-bit, prefetchable) [size=32M]
   I/O ports at df00 [size=128]
   [virtual] Expansion ROM at fa000000 [disabled] [size=512K]
   Capabilities: [60] Power Management version 3
   Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
   Capabilities: [78] Express Endpoint, MSI 00
   Capabilities: [b4] Vendor Specific Information: Len=14 <?>
   Capabilities: [100] Virtual Channel
   Capabilities: [128] Power Budgeting <?>
   Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>

root@debian:~#

[свернуть]

ecc83 · 06 марта 2017, 19:44:38

Цитата: seregareal2 от 06 марта 2017, 18:49:01
Все сделал
Ничего не изменилось

Значит не всё сделал или что то сделал не правильно.

Вообще то интересуют не твои "простыни", а вот это:

Код Выделить

lspci -k | grep VGA -A2

Код Выделить

cat /var/log/Xorg.0.log

Код Выделить

cat /etc/default/grub

Код Выделить

cat /etc/modprobe.d/nvidia-disable-nouveau.conf

Код Выделить

cat /var/log/nvidia-installer.log

seregareal2 · 06 марта 2017, 23:27:13

lspci -k | grep VGA -A2

Открыть содержимое (спойлер)

seregareal2@debian:~$ lspci -k | grep VGA -A2
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 83f4
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
seregareal2@debian:~$

[свернуть]

cat /var/log/Xorg.0.log

Открыть содержимое (спойлер)

[ 31.825]    WinAAttributes: 0x7
[ 31.825]    WinBAttributes: 0x0
[ 31.825]    WinGranularity: 64
[ 31.825]    WinSize: 64
[ 31.825]    WinASegment: 0xa000
[ 31.825]    WinBSegment: 0x0
[ 31.825]    WinFuncPtr: 0xc00067f7
[ 31.825]    BytesPerScanline: 640
[ 31.825]    XResolution: 320
[ 31.825]    YResolution: 240
[ 31.825]    XCharSize: 8
[ 31.825]    YCharSize: 8
[ 31.825]    NumberOfPlanes: 1
[ 31.825]    BitsPerPixel: 16
[ 31.825]    NumberOfBanks: 1
[ 31.825]    MemoryModel: 6
[ 31.825]    BankSize: 0
[ 31.825]    NumberOfImages: 19
[ 31.825]    RedMaskSize: 5
[ 31.825]    RedFieldPosition: 11
[ 31.825]    GreenMaskSize: 6
[ 31.825]    GreenFieldPosition: 5
[ 31.826]    BlueMaskSize: 5
[ 31.826]    BlueFieldPosition: 0
[ 31.826]    RsvdMaskSize: 0
[ 31.826]    RsvdFieldPosition: 0
[ 31.826]    DirectColorModeInfo: 0
[ 31.826]    PhysBasePtr: 0xef000000
[ 31.826]    LinBytesPerScanLine: 640
[ 31.826]    BnkNumberOfImagePages: 19
[ 31.826]    LinNumberOfImagePages: 19
[ 31.826]    LinRedMaskSize: 5
[ 31.826]    LinRedFieldPosition: 11
[ 31.826]    LinGreenMaskSize: 6
[ 31.826]    LinGreenFieldPosition: 5
[ 31.826]    LinBlueMaskSize: 5
[ 31.826]    LinBlueFieldPosition: 0
[ 31.826]    LinRsvdMaskSize: 0
[ 31.826]    LinRsvdFieldPosition: 0
[ 31.826]    MaxPixelClock: 229500000
[ 31.826] *Mode: 136 (320x240)
[ 31.826]    ModeAttributes: 0x3bf
[ 31.826]    WinAAttributes: 0x7
[ 31.826]    WinBAttributes: 0x0
[ 31.826]    WinGranularity: 64
[ 31.826]    WinSize: 64
[ 31.826]    WinASegment: 0xa000
[ 31.826]    WinBSegment: 0x0
[ 31.826]    WinFuncPtr: 0xc00067f7
[ 31.826]    BytesPerScanline: 1280
[ 31.826]    XResolution: 320
[ 31.826]    YResolution: 240
[ 31.826]    XCharSize: 8
[ 31.826]    YCharSize: 8
[ 31.826]    NumberOfPlanes: 1
[ 31.826]    BitsPerPixel: 32
[ 31.826]    NumberOfBanks: 1
[ 31.826]    MemoryModel: 6
[ 31.826]    BankSize: 0
[ 31.826]    NumberOfImages: 10
[ 31.826]    RedMaskSize: 8
[ 31.826]    RedFieldPosition: 16
[ 31.826]    GreenMaskSize: 8
[ 31.826]    GreenFieldPosition: 8
[ 31.826]    BlueMaskSize: 8
[ 31.827]    BlueFieldPosition: 0
[ 31.827]    RsvdMaskSize: 8
[ 31.827]    RsvdFieldPosition: 24
[ 31.827]    DirectColorModeInfo: 0
[ 31.827]    PhysBasePtr: 0xef000000
[ 31.827]    LinBytesPerScanLine: 1280
[ 31.827]    BnkNumberOfImagePages: 10
[ 31.827]    LinNumberOfImagePages: 10
[ 31.827]    LinRedMaskSize: 8
[ 31.827]    LinRedFieldPosition: 16
[ 31.827]    LinGreenMaskSize: 8
[ 31.827]    LinGreenFieldPosition: 8
[ 31.827]    LinBlueMaskSize: 8
[ 31.827]    LinBlueFieldPosition: 0
[ 31.827]    LinRsvdMaskSize: 8
[ 31.827]    LinRsvdFieldPosition: 24
[ 31.827]    MaxPixelClock: 229500000
[ 31.827] Mode: 13d (640x400)
[ 31.827]    ModeAttributes: 0x3bf
[ 31.827]    WinAAttributes: 0x7
[ 31.827]    WinBAttributes: 0x0
[ 31.827]    WinGranularity: 64
[ 31.827]    WinSize: 64
[ 31.827]    WinASegment: 0xa000
[ 31.827]    WinBSegment: 0x0
[ 31.827]    WinFuncPtr: 0xc00067f7
[ 31.827]    BytesPerScanline: 1280
[ 31.827]    XResolution: 640
[ 31.827]    YResolution: 400
[ 31.827]    XCharSize: 8
[ 31.827]    YCharSize: 16
[ 31.827]    NumberOfPlanes: 1
[ 31.827]    BitsPerPixel: 16
[ 31.827]    NumberOfBanks: 1
[ 31.827]    MemoryModel: 6
[ 31.827]    BankSize: 0
[ 31.827]    NumberOfImages: 6
[ 31.827]    RedMaskSize: 5
[ 31.827]    RedFieldPosition: 11
[ 31.827]    GreenMaskSize: 6
[ 31.827]    GreenFieldPosition: 5
[ 31.828]    BlueMaskSize: 5
[ 31.828]    BlueFieldPosition: 0
[ 31.828]    RsvdMaskSize: 0
[ 31.828]    RsvdFieldPosition: 0
[ 31.828]    DirectColorModeInfo: 0
[ 31.828]    PhysBasePtr: 0xef000000
[ 31.828]    LinBytesPerScanLine: 1280
[ 31.828]    BnkNumberOfImagePages: 6
[ 31.828]    LinNumberOfImagePages: 6
[ 31.828]    LinRedMaskSize: 5
[ 31.828]    LinRedFieldPosition: 11
[ 31.828]    LinGreenMaskSize: 6
[ 31.828]    LinGreenFieldPosition: 5
[ 31.828]    LinBlueMaskSize: 5
[ 31.828]    LinBlueFieldPosition: 0
[ 31.828]    LinRsvdMaskSize: 0
[ 31.828]    LinRsvdFieldPosition: 0
[ 31.828]    MaxPixelClock: 229500000
[ 31.828] *Mode: 13e (640x400)
[ 31.828]    ModeAttributes: 0x3bf
[ 31.828]    WinAAttributes: 0x7
[ 31.828]    WinBAttributes: 0x0
[ 31.828]    WinGranularity: 64
[ 31.828]    WinSize: 64
[ 31.828]    WinASegment: 0xa000
[ 31.828]    WinBSegment: 0x0
[ 31.828]    WinFuncPtr: 0xc00067f7
[ 31.828]    BytesPerScanline: 2560
[ 31.828]    XResolution: 640
[ 31.828]    YResolution: 400
[ 31.828]    XCharSize: 8
[ 31.828]    YCharSize: 16
[ 31.828]    NumberOfPlanes: 1
[ 31.828]    BitsPerPixel: 32
[ 31.828]    NumberOfBanks: 1
[ 31.828]    MemoryModel: 6
[ 31.828]    BankSize: 0
[ 31.829]    NumberOfImages: 2
[ 31.829]    RedMaskSize: 8
[ 31.829]    RedFieldPosition: 16
[ 31.829]    GreenMaskSize: 8
[ 31.829]    GreenFieldPosition: 8
[ 31.829]    BlueMaskSize: 8
[ 31.829]    BlueFieldPosition: 0
[ 31.829]    RsvdMaskSize: 8
[ 31.829]    RsvdFieldPosition: 24
[ 31.829]    DirectColorModeInfo: 0
[ 31.829]    PhysBasePtr: 0xef000000
[ 31.829]    LinBytesPerScanLine: 2560
[ 31.829]    BnkNumberOfImagePages: 2
[ 31.829]    LinNumberOfImagePages: 2
[ 31.829]    LinRedMaskSize: 8
[ 31.829]    LinRedFieldPosition: 16
[ 31.829]    LinGreenMaskSize: 8
[ 31.829]    LinGreenFieldPosition: 8
[ 31.829]    LinBlueMaskSize: 8
[ 31.829]    LinBlueFieldPosition: 0
[ 31.829]    LinRsvdMaskSize: 8
[ 31.829]    LinRsvdFieldPosition: 24
[ 31.829]    MaxPixelClock: 229500000
[ 31.829] Mode: 145 (1600x1200)
[ 31.829]    ModeAttributes: 0x3bf
[ 31.829]    WinAAttributes: 0x7
[ 31.829]    WinBAttributes: 0x0
[ 31.829]    WinGranularity: 64
[ 31.829]    WinSize: 64
[ 31.829]    WinASegment: 0xa000
[ 31.829]    WinBSegment: 0x0
[ 31.829]    WinFuncPtr: 0xc00067f7
[ 31.829]    BytesPerScanline: 1600
[ 31.829]    XResolution: 1600
[ 31.829]    YResolution: 1200
[ 31.829]    XCharSize: 8
[ 31.829]    YCharSize: 16
[ 31.829]    NumberOfPlanes: 1
[ 31.829]    BitsPerPixel: 8
[ 31.829]    NumberOfBanks: 1
[ 31.829]    MemoryModel: 4
[ 31.829]    BankSize: 0
[ 31.830]    NumberOfImages: 1
[ 31.830]    RedMaskSize: 0
[ 31.830]    RedFieldPosition: 0
[ 31.830]    GreenMaskSize: 0
[ 31.830]    GreenFieldPosition: 0
[ 31.830]    BlueMaskSize: 0
[ 31.830]    BlueFieldPosition: 0
[ 31.830]    RsvdMaskSize: 0
[ 31.830]    RsvdFieldPosition: 0
[ 31.830]    DirectColorModeInfo: 0
[ 31.830]    PhysBasePtr: 0xef000000
[ 31.830]    LinBytesPerScanLine: 1600
[ 31.830]    BnkNumberOfImagePages: 1
[ 31.830]    LinNumberOfImagePages: 1
[ 31.830]    LinRedMaskSize: 0
[ 31.830]    LinRedFieldPosition: 0
[ 31.830]    LinGreenMaskSize: 0
[ 31.830]    LinGreenFieldPosition: 0
[ 31.830]    LinBlueMaskSize: 0
[ 31.830]    LinBlueFieldPosition: 0
[ 31.830]    LinRsvdMaskSize: 0
[ 31.830]    LinRsvdFieldPosition: 0
[ 31.830]    MaxPixelClock: 229500000
[ 31.830] Mode: 146 (1600x1200)
[ 31.830]    ModeAttributes: 0x3bf
[ 31.830]    WinAAttributes: 0x7
[ 31.830]    WinBAttributes: 0x0
[ 31.830]    WinGranularity: 64
[ 31.830]    WinSize: 64
[ 31.830]    WinASegment: 0xa000
[ 31.830]    WinBSegment: 0x0
[ 31.830]    WinFuncPtr: 0xc00067f7
[ 31.830]    BytesPerScanline: 3200
[ 31.830]    XResolution: 1600
[ 31.830]    YResolution: 1200
[ 31.830]    XCharSize: 8
[ 31.830]    YCharSize: 16
[ 31.830]    NumberOfPlanes: 1
[ 31.830]    BitsPerPixel: 16
[ 31.831]    NumberOfBanks: 1
[ 31.831]    MemoryModel: 6
[ 31.831]    BankSize: 0
[ 31.831]    NumberOfImages: 1
[ 31.831]    RedMaskSize: 5
[ 31.831]    RedFieldPosition: 11
[ 31.831]    GreenMaskSize: 6
[ 31.831]    GreenFieldPosition: 5
[ 31.831]    BlueMaskSize: 5
[ 31.831]    BlueFieldPosition: 0
[ 31.831]    RsvdMaskSize: 0
[ 31.831]    RsvdFieldPosition: 0
[ 31.831]    DirectColorModeInfo: 0
[ 31.831]    PhysBasePtr: 0xef000000
[ 31.831]    LinBytesPerScanLine: 3200
[ 31.831]    BnkNumberOfImagePages: 1
[ 31.831]    LinNumberOfImagePages: 1
[ 31.831]    LinRedMaskSize: 5
[ 31.831]    LinRedFieldPosition: 11
[ 31.831]    LinGreenMaskSize: 6
[ 31.831]    LinGreenFieldPosition: 5
[ 31.831]    LinBlueMaskSize: 5
[ 31.831]    LinBlueFieldPosition: 0
[ 31.831]    LinRsvdMaskSize: 0
[ 31.831]    LinRsvdFieldPosition: 0
[ 31.831]    MaxPixelClock: 229500000
[ 31.831] *Mode: 14a (1600x1200)
[ 31.831]    ModeAttributes: 0x3bf
[ 31.831]    WinAAttributes: 0x7
[ 31.831]    WinBAttributes: 0x0
[ 31.831]    WinGranularity: 64
[ 31.831]    WinSize: 64
[ 31.831]    WinASegment: 0xa000
[ 31.831]    WinBSegment: 0x0
[ 31.831]    WinFuncPtr: 0xc00067f7
[ 31.831]    BytesPerScanline: 6400
[ 31.831]    XResolution: 1600
[ 31.831]    YResolution: 1200
[ 31.831]    XCharSize: 8
[ 31.832]    YCharSize: 16
[ 31.832]    NumberOfPlanes: 1
[ 31.832]    BitsPerPixel: 32
[ 31.832]    NumberOfBanks: 1
[ 31.832]    MemoryModel: 6
[ 31.832]    BankSize: 0
[ 31.832]    NumberOfImages: 1
[ 31.832]    RedMaskSize: 8
[ 31.832]    RedFieldPosition: 16
[ 31.832]    GreenMaskSize: 8
[ 31.832]    GreenFieldPosition: 8
[ 31.832]    BlueMaskSize: 8
[ 31.832]    BlueFieldPosition: 0
[ 31.832]    RsvdMaskSize: 8
[ 31.832]    RsvdFieldPosition: 24
[ 31.832]    DirectColorModeInfo: 0
[ 31.832]    PhysBasePtr: 0xef000000
[ 31.832]    LinBytesPerScanLine: 6400
[ 31.832]    BnkNumberOfImagePages: 1
[ 31.832]    LinNumberOfImagePages: 1
[ 31.832]    LinRedMaskSize: 8
[ 31.832]    LinRedFieldPosition: 16
[ 31.832]    LinGreenMaskSize: 8
[ 31.832]    LinGreenFieldPosition: 8
[ 31.832]    LinBlueMaskSize: 8
[ 31.832]    LinBlueFieldPosition: 0
[ 31.832]    LinRsvdMaskSize: 8
[ 31.832]    LinRsvdFieldPosition: 24
[ 31.832]    MaxPixelClock: 229500000
[ 31.832]
[ 31.832] (II) VESA(0): Total Memory: 224 64KB banks (14336kB)
[ 31.832] (II) VESA(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[ 31.832] (II) VESA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[ 31.832] (II) VESA(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[ 31.832] (WW) VESA(0): Unable to estimate virtual size
[ 31.832] (II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
[ 31.832] (II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
[ 31.832] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
[ 31.832] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
[ 31.832] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
[ 31.832] (II) VESA(0): Not using built-in mode "640x400" (no mode of this name)
[ 31.832] (II) VESA(0): Not using built-in mode "320x400" (no mode of this name)
[ 31.832] (II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
[ 31.832] (II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
[ 31.832] (WW) VESA(0): No valid modes left. Trying less strict filter...
[ 31.832] (II) VESA(0): <default monitor>: Using hsync range of 31.50-48.00 kHz
[ 31.832] (II) VESA(0): <default monitor>: Using vrefresh range of 50.00-70.00 Hz
[ 31.832] (II) VESA(0): <default monitor>: Using maximum pixel clock of 65.00 MHz
[ 31.832] (WW) VESA(0): Unable to estimate virtual size
[ 31.832] (II) VESA(0): Not using built-in mode "1600x1200" (hsync out of range)
[ 31.832] (II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
[ 31.832] (II) VESA(0): Not using built-in mode "640x400" (hsync out of range)
[ 31.832] (II) VESA(0): Not using built-in mode "320x400" (hsync out of range)
[ 31.832] (II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings)
[ 31.832] (II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings)
[ 31.832] (--) VESA(0): Virtual size is 1024x768 (pitch 1024)
[ 31.832] (**) VESA(0): *Built-in mode "1024x768"
[ 31.832] (**) VESA(0): *Built-in mode "800x600"
[ 31.832] (**) VESA(0): *Built-in mode "640x480"
[ 31.832] (==) VESA(0): DPI set to (96, 96)
[ 31.832] (II) VESA(0): Attempting to use 60Hz refresh for mode "1024x768" (118)
[ 31.833] (II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
[ 31.833] (II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
[ 31.833] (**) VESA(0): Using "Shadow Framebuffer"
[ 31.834] (II) Loading sub module "shadow"
[ 31.834] (II) LoadModule: "shadow"
[ 31.834] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 32.301] (II) Module shadow: vendor="X.Org Foundation"
[ 32.301]    compiled for 1.16.4, module version = 1.1.0
[ 32.301]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.301] (II) Loading sub module "fb"
[ 32.301] (II) LoadModule: "fb"
[ 32.301] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 32.453] (II) Module fb: vendor="X.Org Foundation"
[ 32.453]    compiled for 1.16.4, module version = 1.0.0
[ 32.453]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.453] (==) Depth 24 pixmap format is 32 bpp
[ 32.453] (II) Loading sub module "int10"
[ 32.453] (II) LoadModule: "int10"
[ 32.453] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 32.453] (II) Module int10: vendor="X.Org Foundation"
[ 32.453]    compiled for 1.16.4, module version = 1.0.0
[ 32.453]    ABI class: X.Org Video Driver, version 18.0
[ 32.453] (II) VESA(0): initializing int10
[ 32.454] (II) VESA(0): Bad V_BIOS checksum
[ 32.454] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 32.484] (II) VESA(0): VESA BIOS detected
[ 32.484] (II) VESA(0): VESA VBE Version 3.0
[ 32.484] (II) VESA(0): VESA VBE Total Mem: 14336 kB
[ 32.484] (II) VESA(0): VESA VBE OEM: NVIDIA
[ 32.484] (II) VESA(0): VESA VBE OEM Software Rev: 112.24
[ 32.485] (II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation
[ 32.485] (II) VESA(0): VESA VBE OEM Product: GT218 Board - 08730000
[ 32.485] (II) VESA(0): VESA VBE OEM Product Rev: Chip Rev
[ 32.485] (II) VESA(0): virtual address = 0x7fef59c67000,
   physical address = 0xef000000, size = 14680064
[ 32.508] (II) VESA(0): Setting up VESA Mode 0x118 (1024x768)
[ 33.528] (==) VESA(0): Default visual is TrueColor
[ 33.590] (==) VESA(0): Backing store enabled
[ 33.596] (==) VESA(0): DPMS enabled
[ 33.596] (==) RandR enabled
[ 33.604] (II) SELinux: Disabled on system
[ 33.605] (II) AIGLX: Screen 0 is not DRI2 capable
[ 33.605] (EE) AIGLX: reverting to software rendering
[ 35.360] (II) AIGLX: Loaded and initialized swrast
[ 35.360] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 35.725] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 35.725] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.725] (II) LoadModule: "evdev"
[ 35.725] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.774] (II) Module evdev: vendor="X.Org Foundation"
[ 35.774]    compiled for 1.16.0, module version = 2.9.0
[ 35.774]    Module class: X.Org XInput Driver
[ 35.774]    ABI class: X.Org XInput driver, version 21.0
[ 35.774] (II) Using input driver 'evdev' for 'Power Button'
[ 35.774] (**) Power Button: always reports core events
[ 35.774] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 35.774] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.774] (--) evdev: Power Button: Found keys
[ 35.774] (II) evdev: Power Button: Configuring as keyboard
[ 35.774] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 35.774] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 35.774] (**) Option "xkb_rules" "evdev"
[ 35.774] (**) Option "xkb_model" "pc105"
[ 35.774] (**) Option "xkb_layout" "us,ru"
[ 35.774] (**) Option "xkb_variant" ","
[ 35.774] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 35.820] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 35.820] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.820] (II) Using input driver 'evdev' for 'Power Button'
[ 35.820] (**) Power Button: always reports core events
[ 35.820] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 35.820] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.820] (--) evdev: Power Button: Found keys
[ 35.820] (II) evdev: Power Button: Configuring as keyboard
[ 35.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 35.820] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 35.820] (**) Option "xkb_rules" "evdev"
[ 35.820] (**) Option "xkb_model" "pc105"
[ 35.820] (**) Option "xkb_layout" "us,ru"
[ 35.820] (**) Option "xkb_variant" ","
[ 35.820] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 35.821] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 35.821] (II) No input driver specified, ignoring this device.
[ 35.821] (II) This device may have been added with another device file.
[ 35.821] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 35.821] (II) No input driver specified, ignoring this device.
[ 35.821] (II) This device may have been added with another device file.
[ 35.821] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 35.821] (II) No input driver specified, ignoring this device.
[ 35.821] (II) This device may have been added with another device file.
[ 35.821] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 35.821] (II) No input driver specified, ignoring this device.
[ 35.821] (II) This device may have been added with another device file.
[ 35.822] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event0)
[ 35.822] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 35.822] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 35.822] (**) Logitech USB Optical Mouse: always reports core events
[ 35.822] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event0"
[ 35.822] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[ 35.822] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 35.822] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 35.822] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 35.822] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 35.822] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 35.822] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 35.822] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 35.822] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.822] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C077.0001/input/input1/event0"
[ 35.822] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id

[ 35.822] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 35.822] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 35.822] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 35.822] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 35.822] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 35.822] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 35.822] (II) No input driver specified, ignoring this device.
[ 35.822] (II) This device may have been added with another device file.
[ 35.823] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event1)
[ 35.823] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.823] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[ 35.823] (**) SIGMACHIP USB Keyboard: always reports core events
[ 35.823] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event1"
[ 35.823] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x55
[ 35.823] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[ 35.823] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[ 35.823] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1C4F:0055.0002/input/input2/event1"
[ 35.823] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 9)
[ 35.823] (**) Option "xkb_rules" "evdev"
[ 35.823] (**) Option "xkb_model" "pc105"
[ 35.823] (**) Option "xkb_layout" "us,ru"
[ 35.823] (**) Option "xkb_variant" ","
[ 35.823] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 35.824] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event2)
[ 35.824] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.824] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[ 35.824] (**) SIGMACHIP USB Keyboard: always reports core events
[ 35.824] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event2"
[ 35.824] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x55
[ 35.824] (--) evdev: SIGMACHIP USB Keyboard: Found 1 mouse buttons
[ 35.824] (--) evdev: SIGMACHIP USB Keyboard: Found scroll wheel(s)
[ 35.824] (--) evdev: SIGMACHIP USB Keyboard: Found relative axes
[ 35.824] (II) evdev: SIGMACHIP USB Keyboard: Forcing relative x/y axes to exist.
[ 35.824] (--) evdev: SIGMACHIP USB Keyboard: Found absolute axes
[ 35.824] (II) evdev: SIGMACHIP USB Keyboard: Forcing absolute x/y axes to exist.
[ 35.824] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[ 35.824] (II) evdev: SIGMACHIP USB Keyboard: Configuring as mouse
[ 35.824] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[ 35.824] (II) evdev: SIGMACHIP USB Keyboard: Adding scrollwheel support
[ 35.824] (**) evdev: SIGMACHIP USB Keyboard: YAxisMapping: buttons 4 and 5
[ 35.824] (**) evdev: SIGMACHIP USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0055.0003/input/input3/event2"
[ 35.824] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 10)
[ 35.824] (**) Option "xkb_rules" "evdev"
[ 35.824] (**) Option "xkb_model" "pc105"
[ 35.824] (**) Option "xkb_layout" "us,ru"
[ 35.824] (**) Option "xkb_variant" ","
[ 35.824] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 35.824] (II) evdev: SIGMACHIP USB Keyboard: initialized for relative axes.
[ 35.824] (WW) evdev: SIGMACHIP USB Keyboard: ignoring absolute axes.
[ 35.824] (**) SIGMACHIP USB Keyboard: (accel) keeping acceleration scheme 1
[ 35.824] (**) SIGMACHIP USB Keyboard: (accel) acceleration profile 0
[ 35.825] (**) SIGMACHIP USB Keyboard: (accel) acceleration factor: 2.000
[ 35.825] (**) SIGMACHIP USB Keyboard: (accel) acceleration threshold: 4
[ 35.825] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 35.825] (II) No input driver specified, ignoring this device.
[ 35.825] (II) This device may have been added with another device file.
[ 35.825] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 35.825] (II) No input driver specified, ignoring this device.
[ 35.825] (II) This device may have been added with another device file.
[ 35.825] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 35.825] (II) No input driver specified, ignoring this device.
[ 35.825] (II) This device may have been added with another device file.
[ 35.826] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[ 35.826] (II) No input driver specified, ignoring this device.
[ 35.826] (II) This device may have been added with another device file.
[ 35.826] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 35.826] (II) No input driver specified, ignoring this device.
[ 35.826] (II) This device may have been added with another device file.
[ 35.826] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 35.826] (II) No input driver specified, ignoring this device.
[ 35.826] (II) This device may have been added with another device file.
[ 35.826] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 35.826] (II) No input driver specified, ignoring this device.
[ 35.826] (II) This device may have been added with another device file.
seregareal2@debian:~$

[свернуть]

cat /etc/default/grub

Открыть содержимое (спойлер)

seregareal2@debian:~$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet nomodeset"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
seregareal2@debian:~$

[свернуть]

cat /etc/modprobe.d/nvidia-disable-nouveau.conf

Открыть содержимое (спойлер)

seregareal2@debian:~$ cat /etc/modprobe.d/nvidia-disable-nouveau.conf
blacklist nouveau
alias nvidia nvidia_current_updates
alias nouveau off
alias lbm-nouveau off
options nouveau modeset=0
seregareal2@debian:~$

[свернуть]

cat /var/log/nvidia-installer.log

Открыть содержимое (спойлер)

seregareal2@debian:~$ cat /var/log/nvidia-installer.log
cat: /var/log/nvidia-installer.log: Нет такого файла или каталога
seregareal2@debian:~$ cd /var/log/
seregareal2@debian:/var/log$ ls
alternatives.log clonezilla.log dpkg.log hp ocs-mount.log syslog.3.gz Xorg.0.log
apache2 cups exim4 installer partimage syslog.4.gz Xorg.0.log.old
apt daemon.log faillog kern.log sgfxi tor Xorg.1.log
aptitude daemon.log.1 firebird kern.log.1 speech-dispatcher unattended-upgrades Xorg.2.log
auth.log debug fontconfig.log lastlog syslog user.log xrdp-sesman.log
auth.log.1 debug.1 fsck messages syslog.1 user.log.1
btmp dmesg gdm3 messages.1 syslog.2.gz wtmp
seregareal2@debian:/var/log$

[свернуть]

amd_amd · 07 марта 2017, 00:31:42

а как они слетели? что то наверняка делалось? может обновились дровишки?

ecc83 · 07 марта 2017, 01:02:19

seregareal2, похоже что вы только первый пункт скрипта выполнили, то есть отключили драйвер nouveau, а никакой новый не установили.

Необходимо войти в консоль (Ctrl-Alt-F2) как root, выключить графический сервер и выполнить команду:

Код Выделить

cd /usr/local/bin && wget smxi.org/sgfxi && chmod +x sgfxi && sgfxi -o 340.102

Интернет должен быть подключен!

Потом покажите:

Код Выделить

cat /var/log/sgfxi/sgfxi.*

seregareal2 · 08 марта 2017, 14:14:18

Я вчера все сломал, и поэтому поставил себе новый дискрибутив, дрова тоже с у установкой не встали, хотя раньше они сами с установкой системы вставили

Открыть содержимое (спойлер)

┌─[seregareal2@parrot]─[~]
└──╼ $lspci -k | grep VGA -A2
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
   Subsystem: ASUSTeK Computer Inc. GT218 [GeForce 210]
   Kernel driver in use: nouveau
┌─[seregareal2@parrot]─[~]
└──╼ $cat /var/log/Xorg.0.log
[ 36.210]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[ 36.210] X Protocol Version 11, Revision 0
[ 36.210] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 36.210] Current Operating System: Linux parrot 4.9.0-parrot13-amd64 #1 SMP Parrot 4.9.13-1parrot1 (2017-03-02) x86_64
[ 36.210] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-parrot13-amd64 root=UUID=c141c995-54a8-4cb6-b873-aad8b2d98412 ro quiet
[ 36.211] Build Date: 20 January 2017 02:50:48AM
[ 36.211] xorg-server 2:1.19.1-4 (https://www.debian.org/support)
[ 36.211] Current version of pixman: 0.34.0
[ 36.211]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[ 36.211] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.211] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 8 13:38:00 2017
[ 36.461] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 36.905] (==) No Layout section. Using the first Screen section.
[ 36.905] (==) No screen section available. Using defaults.
[ 36.905] (**) |-->Screen "Default Screen Section" (0)
[ 36.905] (**) | |-->Monitor "<default monitor>"
[ 37.059] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[ 37.059] (==) Automatically adding devices
[ 37.059] (==) Automatically enabling devices
[ 37.059] (==) Automatically adding GPU devices
[ 37.059] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 37.609] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 37.652]    Entry deleted from font path.
[ 37.898] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[ 37.898] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 37.898] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 37.898] (II) Loader magic: 0x564741de0e00
[ 37.898] (II) Module ABI versions:
[ 37.898]    X.Org ANSI C Emulation: 0.4
[ 37.898]    X.Org Video Driver: 23.0
[ 37.898]    X.Org XInput driver : 24.1
[ 37.898]    X.Org Server Extension : 10.0
[ 37.899] (++) using VT number 7

[ 37.899] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 37.900] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 37.900] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 37.938] (--) PCI: (0:0:2:0) 8086:0102:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xc0000000/268435456, I/O @ 0x0000ff00/64
[ 37.938] (--) PCI:*(0:1:0:0) 10de:0a65:1043:83f4 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x?

?/131072
[ 37.938] (II) LoadModule: "glx"
[ 38.418] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 39.725] (II) Module glx: vendor="X.Org Foundation"
[ 39.725]    compiled for 1.19.1, module version = 1.0.0
[ 39.725]    ABI class: X.Org Server Extension, version 10.0
[ 39.725] (==) Matched nouveau as autoconfigured driver 0
[ 39.725] (==) Matched nv as autoconfigured driver 1
[ 39.725] (==) Matched nouveau as autoconfigured driver 2
[ 39.725] (==) Matched nv as autoconfigured driver 3
[ 39.725] (==) Matched modesetting as autoconfigured driver 4
[ 39.725] (==) Matched fbdev as autoconfigured driver 5
[ 39.725] (==) Matched vesa as autoconfigured driver 6
[ 39.725] (==) Assigned the driver to the xf86ConfigLayout
[ 39.725] (II) LoadModule: "nouveau"
[ 39.754] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 40.050] (II) Module nouveau: vendor="X.Org Foundation"
[ 40.050]    compiled for 1.19.0, module version = 1.0.13
[ 40.050]    Module class: X.Org Video Driver
[ 40.050]    ABI class: X.Org Video Driver, version 23.0
[ 40.050] (II) LoadModule: "nv"
[ 40.073] (WW) Warning, couldn't open module nv
[ 40.073] (II) UnloadModule: "nv"
[ 40.073] (II) Unloading nv
[ 40.073] (EE) Failed to load module "nv" (module does not exist, 0)
[ 40.073] (II) LoadModule: "modesetting"
[ 40.073] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 40.160] (II) Module modesetting: vendor="X.Org Foundation"
[ 40.160]    compiled for 1.19.1, module version = 1.19.1
[ 40.160]    Module class: X.Org Video Driver
[ 40.160]    ABI class: X.Org Video Driver, version 23.0
[ 40.160] (II) LoadModule: "fbdev"
[ 40.160] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 40.230] (II) Module fbdev: vendor="X.Org Foundation"
[ 40.230]    compiled for 1.19.0, module version = 0.4.4
[ 40.230]    Module class: X.Org Video Driver
[ 40.230]    ABI class: X.Org Video Driver, version 23.0
[ 40.230] (II) LoadModule: "vesa"
[ 40.230] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 40.323] (II) Module vesa: vendor="X.Org Foundation"
[ 40.323]    compiled for 1.19.0, module version = 2.3.4
[ 40.323]    Module class: X.Org Video Driver
[ 40.323]    ABI class: X.Org Video Driver, version 23.0
[ 40.323] (II) NOUVEAU driver Date: Tue Sep 20 00:31:06 2016 -0400
[ 40.323] (II) NOUVEAU driver for NVIDIA chipset families :
[ 40.323]    RIVA TNT (NV04)
[ 40.323]    RIVA TNT2 (NV05)
[ 40.323]    GeForce 256 (NV10)
[ 40.323]    GeForce 2 (NV11, NV15)
[ 40.323]    GeForce 4MX (NV17, NV18)
[ 40.323]    GeForce 3 (NV20)
[ 40.323]    GeForce 4Ti (NV25, NV28)
[ 40.323]    GeForce FX (NV3x)
[ 40.323]    GeForce 6 (NV4x)
[ 40.323]    GeForce 7 (G7x)
[ 40.323]    GeForce 8 (G8x)
[ 40.323]    GeForce GTX 200 (NVA0)
[ 40.323]    GeForce GTX 400 (NVC0)
[ 40.323] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 40.324] (II) FBDEV: driver for framebuffer: fbdev
[ 40.324] (II) VESA: driver for VESA chipsets: vesa
[ 40.325] (II) [drm] nouveau interface version: 1.3.1
[ 40.328] (II) modeset(G0): using drv /dev/dri/card0
[ 40.328] (WW) Falling back to old probe method for fbdev
[ 40.328] (II) Loading sub module "fbdevhw"
[ 40.328] (II) LoadModule: "fbdevhw"
[ 40.328] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 40.426] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 40.426]    compiled for 1.19.1, module version = 0.0.2
[ 40.426]    ABI class: X.Org Video Driver, version 23.0
[ 40.426] (WW) Falling back to old probe method for vesa
[ 40.427] (II) Loading sub module "dri2"
[ 40.427] (II) LoadModule: "dri2"
[ 40.427] (II) Module "dri2" already built-in
[ 40.427] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[ 40.427] (II) NOUVEAU(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[ 40.427] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 40.427] (==) NOUVEAU(0): RGB weight 888
[ 40.427] (==) NOUVEAU(0): Default visual is TrueColor
[ 40.427] (==) NOUVEAU(0): Using HW cursor
[ 40.427] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 40.427] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 40.427] (==) NOUVEAU(0): Page flipping enabled
[ 40.427] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 40.427] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 40.427] (II) NOUVEAU(0): Initializing outputs ...
[ 40.438] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 40.439] (II) NOUVEAU(0): Output HDMI-2 has no monitor section
[ 40.484] (II) NOUVEAU(0): Output VGA-2 has no monitor section
[ 40.484] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 40.492] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 40.492] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 40.503] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 40.504] (II) NOUVEAU(0): EDID for output HDMI-2
[ 40.551] (II) NOUVEAU(0): EDID for output VGA-2
[ 40.551] (II) NOUVEAU(0): Printing probed modes for output VGA-2
[ 40.551] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 40.551] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 40.551] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 40.551] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 40.551] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 40.551] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 40.551] (II) NOUVEAU(0): Output HDMI-2 disconnected
[ 40.551] (II) NOUVEAU(0): Output VGA-2 connected
[ 40.551] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 40.551] (II) NOUVEAU(0): Output VGA-2 using initial mode 1024x768 +0+0
[ 40.551] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 40.551] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 40.551] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 40.551] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 40.551] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 40.551] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 40.551] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 40.551] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 40.551] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 40.551] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 40.551] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 40.551] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 40.551] (==) NOUVEAU(0): DPI set to (96, 96)
[ 40.551] (II) Loading sub module "fb"
[ 40.551] (II) LoadModule: "fb"
[ 40.551] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 40.711] (II) Module fb: vendor="X.Org Foundation"
[ 40.711]    compiled for 1.19.1, module version = 1.0.0
[ 40.711]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 40.711] (II) Loading sub module "shadowfb"
[ 40.711] (II) LoadModule: "shadowfb"
[ 40.712] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 40.751] (II) Module shadowfb: vendor="X.Org Foundation"
[ 40.751]    compiled for 1.19.1, module version = 1.0.0
[ 40.751]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 40.752] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 40.752] (==) modeset(G0): RGB weight 888
[ 40.752] (==) modeset(G0): Default visual is TrueColor
[ 40.752] (II) Loading sub module "glamoregl"
[ 40.752] (II) LoadModule: "glamoregl"
[ 40.752] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 41.393] (II) Module glamoregl: vendor="X.Org Foundation"
[ 41.464]    compiled for 1.19.1, module version = 1.0.0
[ 41.464]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 41.464] (II) glamor: OpenGL accelerated X.org driver based.
[ 42.568] (II) glamor: EGL version 1.4 (DRI2):
[ 42.965] (II) modeset(G0): glamor initialized
[ 43.073] (II) modeset(G0): Output VGA-1-1 has no monitor section
[ 43.074] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 43.074] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 43.183] (II) modeset(G0): EDID for output VGA-1-1
[ 43.183] (II) modeset(G0): Printing probed modes for output VGA-1-1
[ 43.183] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 43.183] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 43.183] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 43.183] (II) modeset(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 43.183] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 43.184] (II) modeset(G0): EDID for output HDMI-1-1
[ 43.184] (II) modeset(G0): EDID for output DP-1-1
[ 43.184] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 43.184] (==) modeset(G0): DPI set to (96, 96)
[ 43.184] (II) Loading sub module "fb"
[ 43.184] (II) LoadModule: "fb"
[ 43.184] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 43.184] (II) Module fb: vendor="X.Org Foundation"
[ 43.184]    compiled for 1.19.1, module version = 1.0.0
[ 43.184]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 43.184] (II) UnloadModule: "fbdev"
[ 43.184] (II) Unloading fbdev
[ 43.184] (II) UnloadSubModule: "fbdevhw"
[ 43.184] (II) Unloading fbdevhw
[ 43.184] (II) UnloadModule: "vesa"
[ 43.184] (II) Unloading vesa
[ 43.184] (--) Depth 24 pixmap format is 32 bpp
[ 43.964] (==) modeset(G0): Backing store enabled
[ 43.964] (==) modeset(G0): Silken mouse enabled
[ 43.987] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 44.026] (==) modeset(G0): DPMS enabled
[ 44.026] (II) modeset(G0): [DRI2] Setup complete
[ 44.026] (II) modeset(G0): [DRI2] DRI driver: i965
[ 44.026] (II) modeset(G0): [DRI2] VDPAU driver: i965
[ 44.035] (II) NOUVEAU(0): Channel setup complete.
[ 44.041] (II) NOUVEAU(0): [COPY] async initialised.
[ 44.041] (II) NOUVEAU(0): Hardware support for Present enabled
[ 44.041] (II) NOUVEAU(0): [DRI2] Setup complete
[ 44.041] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 44.041] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 44.041] (II) Loading sub module "exa"
[ 44.041] (II) LoadModule: "exa"
[ 44.041] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 44.077] (II) Module exa: vendor="X.Org Foundation"
[ 44.077]    compiled for 1.19.1, module version = 2.6.0
[ 44.077]    ABI class: X.Org Video Driver, version 23.0
[ 44.085] (II) EXA(0): Driver allocated offscreen pixmaps
[ 44.085] (II) EXA(0): Driver registered support for the following operations:
[ 44.085] (II) Solid
[ 44.085] (II) Copy
[ 44.085] (II) Composite (RENDER acceleration)
[ 44.085] (II) UploadToScreen
[ 44.085] (II) DownloadFromScreen
[ 44.085] (==) NOUVEAU(0): Backing store enabled
[ 44.085] (==) NOUVEAU(0): Silken mouse enabled
[ 44.085] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 44.085] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 44.085] (==) NOUVEAU(0): DPMS enabled
[ 44.085] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 44.085] (--) RandR disabled
[ 44.099] (II) SELinux: Disabled on system
[ 47.140] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 47.140] (II) AIGLX: enabled GLX_ARB_create_context
[ 47.140] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 47.140] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 47.140] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 47.140] (II) AIGLX: enabled GLX_SGI_swap_control
[ 47.140] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 47.140] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 47.140] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 47.140] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 47.141] (II) AIGLX: Loaded and initialized nouveau
[ 47.141] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 47.195] (II) modeset(G0): Damage tracking initialized
[ 47.197] (II) NOUVEAU(0): NVEnterVT is called.
[ 47.217] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 47.217] resize called 1024 768
[ 47.576] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 47.576] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 47.576] (II) LoadModule: "libinput"
[ 47.576] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 47.634] (II) Module libinput: vendor="X.Org Foundation"
[ 47.634]    compiled for 1.19.0, module version = 0.23.0
[ 47.634]    Module class: X.Org XInput Driver
[ 47.634]    ABI class: X.Org XInput driver, version 24.1
[ 47.634] (II) Using input driver 'libinput' for 'Power Button'
[ 47.634] (**) Power Button: always reports core events
[ 47.634] (**) Option "Device" "/dev/input/event1"
[ 47.634] (**) Option "_source" "server/udev"
[ 47.635] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 47.635] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 47.666] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event1"
[ 47.666] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 47.666] (**) Option "xkb_model" "pc105"
[ 47.666] (**) Option "xkb_layout" "us,ru"
[ 47.666] (**) Option "xkb_variant" ","
[ 47.666] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 47.695] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 47.696] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 47.696] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 47.696] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 47.696] (II) Using input driver 'libinput' for 'Power Button'
[ 47.696] (**) Power Button: always reports core events
[ 47.696] (**) Option "Device" "/dev/input/event0"
[ 47.696] (**) Option "_source" "server/udev"
[ 47.696] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
[ 47.696] (II) input device 'Power Button', /dev/input/event0 is a keyboard
[ 47.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event0"
[ 47.713] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 47.713] (**) Option "xkb_model" "pc105"
[ 47.713] (**) Option "xkb_layout" "us,ru"
[ 47.713] (**) Option "xkb_variant" ","
[ 47.713] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 47.714] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
[ 47.714] (II) input device 'Power Button', /dev/input/event0 is a keyboard
[ 47.714] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 47.714] (II) No input driver specified, ignoring this device.
[ 47.714] (II) This device may have been added with another device file.
[ 47.715] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 47.715] (II) No input driver specified, ignoring this device.
[ 47.715] (II) This device may have been added with another device file.
[ 47.715] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 47.715] (II) No input driver specified, ignoring this device.
[ 47.715] (II) This device may have been added with another device file.
[ 47.715] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 47.715] (II) No input driver specified, ignoring this device.
[ 47.715] (II) This device may have been added with another device file.
[ 47.716] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[ 47.716] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 47.716] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 47.716] (**) Logitech USB Optical Mouse: always reports core events
[ 47.716] (**) Option "Device" "/dev/input/event2"
[ 47.716] (**) Option "_source" "server/udev"
[ 47.773] (II) input device 'Logitech USB Optical Mouse', /dev/input/event2 is tagged by udev as: Mouse
[ 47.773] (II) input device 'Logitech USB Optical Mouse', /dev/input/event2 is a pointer caps
[ 47.810] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C077.0001/input/input3/event2"
[ 47.810] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id

[ 47.810] (**) Option "AccelerationScheme" "none"
[ 47.810] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 47.810] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 47.810] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 47.867] (II) input device 'Logitech USB Optical Mouse', /dev/input/event2 is tagged by udev as: Mouse
[ 47.867] (II) input device 'Logitech USB Optical Mouse', /dev/input/event2 is a pointer caps
[ 47.867] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 47.867] (II) No input driver specified, ignoring this device.
[ 47.867] (II) This device may have been added with another device file.
[ 47.868] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event3)
[ 47.868] (**) SIGMACHIP USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 47.868] (II) Using input driver 'libinput' for 'SIGMACHIP USB Keyboard'
[ 47.868] (**) SIGMACHIP USB Keyboard: always reports core events
[ 47.868] (**) Option "Device" "/dev/input/event3"
[ 47.868] (**) Option "_source" "server/udev"
[ 47.868] (II) input device 'SIGMACHIP USB Keyboard', /dev/input/event3 is tagged by udev as: Keyboard
[ 47.868] (II) input device 'SIGMACHIP USB Keyboard', /dev/input/event3 is a keyboard
[ 47.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1C4F:0055.0002/input/input4/event3"
[ 47.903] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 9)
[ 47.903] (**) Option "xkb_model" "pc105"
[ 47.903] (**) Option "xkb_layout" "us,ru"
[ 47.903] (**) Option "xkb_variant" ","
[ 47.903] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 47.904] (II) input device 'SIGMACHIP USB Keyboard', /dev/input/event3 is tagged by udev as: Keyboard
[ 47.904] (II) input device 'SIGMACHIP USB Keyboard', /dev/input/event3 is a keyboard
[ 47.904] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event4)
[ 47.904] (**) SIGMACHIP USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 47.904] (II) Using input driver 'libinput' for 'SIGMACHIP USB Keyboard'
[ 47.904] (**) SIGMACHIP USB Keyboard: always reports core events
[ 47.904] (**) Option "Device" "/dev/input/event4"
[ 47.905] (**) Option "_source" "server/udev"
[ 47.905] (II) input device 'SIGMACHIP USB Keyboard', /dev/input/event4 is tagged by udev as: Keyboard
[ 47.905] (II) input device 'SIGMACHIP USB Keyboard', /dev/input/event4 is a keyboard
[ 47.943] (II) libinput: SIGMACHIP USB Keyboard: needs a virtual subdevice
[ 47.943] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0055.0003/input/input5/event4"
[ 47.943] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: MOUSE, id 10)
[ 47.943] (**) Option "AccelerationScheme" "none"
[ 47.943] (**) SIGMACHIP USB Keyboard: (accel) selected scheme none/0
[ 47.943] (**) SIGMACHIP USB Keyboard: (accel) acceleration factor: 2.000
[ 47.943] (**) SIGMACHIP USB Keyboard: (accel) acceleration threshold: 4
[ 47.944] (II) input device 'SIGMACHIP USB Keyboard', /dev/input/event4 is tagged by udev as: Keyboard
[ 47.944] (II) input device 'SIGMACHIP USB Keyboard', /dev/input/event4 is a keyboard
[ 47.944] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[ 47.944] (II) No input driver specified, ignoring this device.
[ 47.944] (II) This device may have been added with another device file.
[ 47.944] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[ 47.944] (II) No input driver specified, ignoring this device.
[ 47.944] (II) This device may have been added with another device file.
[ 47.945] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 47.945] (II) No input driver specified, ignoring this device.
[ 47.945] (II) This device may have been added with another device file.
[ 47.945] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 47.945] (II) No input driver specified, ignoring this device.
[ 47.945] (II) This device may have been added with another device file.
[ 47.945] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 47.945] (II) No input driver specified, ignoring this device.
[ 47.945] (II) This device may have been added with another device file.
[ 47.946] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 47.946] (II) No input driver specified, ignoring this device.
[ 47.946] (II) This device may have been added with another device file.
[ 47.946] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 47.946] (II) No input driver specified, ignoring this device.
[ 47.946] (II) This device may have been added with another device file.
[ 47.966] (**) SIGMACHIP USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 47.966] (II) Using input driver 'libinput' for 'SIGMACHIP USB Keyboard'
[ 47.966] (**) SIGMACHIP USB Keyboard: always reports core events
[ 47.966] (**) Option "Device" "/dev/input/event4"
[ 47.966] (**) Option "_source" "_driver/libinput"
[ 47.966] (II) libinput: SIGMACHIP USB Keyboard: is a virtual subdevice
[ 47.966] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0055.0003/input/input5/event4"
[ 47.966] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 11)
[ 47.966] (**) Option "xkb_model" "pc105"
[ 47.966] (**) Option "xkb_layout" "us,ru"
[ 47.966] (**) Option "xkb_variant" ","
[ 47.966] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
┌─[seregareal2@parrot]─[~]
└──╼ $cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
┌─[seregareal2@parrot]─[~]
└──╼ $cat /etc/modprobe.d/nvidia-disable-nouveau.conf
cat: /etc/modprobe.d/nvidia-disable-nouveau.conf: Нет такого файла или каталога
┌─[✗]─[seregareal2@parrot]─[~]
└──╼ $cat /var/log/nvidia-installer.log
cat: /var/log/nvidia-installer.log: Нет такого файла или каталога
┌─[✗]─[seregareal2@parrot]─[~]
└──╼ $

[свернуть]

ecc83 · 08 марта 2017, 14:29:02

Ну сейчас загружен стандартный модуль nouveau. Если видео с ним вас не устраивает, тогда сделайте бекап системы с помощью clonezilla, это что бы можно было легко откатиться без переустановки всей системы, и запустите скрипт, что я давал.
Сначала выберете пункт [1], затем перегрузитесь и выберете пункт [2].

Открыть содержимое (спойлер)

#!/bin/sh
RED="\033[5m\033[1;31m"
GRE="\033[5m\033[1;32m"
YELLOW="\033[1;33m"
NC="\033[25m\033[0m"
clear
echo Запускать только от $GRE'ROOT'$NC !!!
echo ""
echo "[$YELLOW"1"$NC] - Отключить свободный драйвер nouveau"
echo "[$YELLOW"2"$NC] - Установить или восстановить драйвер NVIDIA"
echo "[$YELLOW"Q"$NC] - Выйти без изменений"
echo ""
echo -n "Выбор: "
read item
case "$item" in
1)
   echo "blacklist nouveau" > /etc/modprobe.d/nvidia-disable-nouveau.conf
   echo "alias nvidia nvidia_current_updates" >> /etc/modprobe.d/nvidia-disable-nouveau.conf
   echo "alias nouveau off" >> /etc/modprobe.d/nvidia-disable-nouveau.conf
   echo "alias lbm-nouveau off" >> /etc/modprobe.d/nvidia-disable-nouveau.conf
   echo "options nouveau modeset=0" >> /etc/modprobe.d/nvidia-disable-nouveau.conf
sed -i 's/GRUB_CMDLINE_LINUX_DEFAULT=\"$.*$\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1 nomodeset\"/' /etc/default/grub
   clear && update-grub
   echo ""
   echo -n "Необходима перезагрузка. $GREПродолжить? (Y/n)$NC "
   read item
   case "$item" in
n|N) echo "$REDОперация прервана!$NC"
exit 0
;;
*) reboot
;;
esac
   exit 0
;;
2) clear && apt-get update
   apt-get install dkms
   cd /usr/local/bin && wget -Nc smxi.org/sgfxi && chmod +x sgfxi && clear && sgfxi -o 340.102
   echo "$GREПерезагрузка ...$NC" && sleep 1 && reboot
   exit 0
;;
q|Q) clear
   exit 0
;;
*) clear && echo "$REDОперация прервана!$NC"
   exit 0
;;
esac

[свернуть]

seregareal2 · 08 марта 2017, 17:20:19

Вроде через скрипт встал, но ничего не изменилось, расширение экрана 1024 на 768 досих пор

┌─[seregareal2@parrot]─[/]
└──╼ $cat /var/log/sgfxi/sgfxi.*
cat: '/var/log/sgfxi/sgfxi.*': No such file or directory
┌─[✗]─[seregareal2@parrot]─[/]
└──╼ $

Приостановить графическиий процесс это команда init 3 ?

я даже так пропробовал, не помогло, но что то установилось

[вложение удалено администратором]

ecc83 · 09 марта 2017, 00:15:10

Странно все это...

Покажите:

Код Выделить

cat /etc/default/grub

И запустите ещё раз из консоли эту команду:

Код Выделить

cd /usr/local/bin && wget smxi.org/sgfxi && chmod +x sgfxi && sgfxi -o 340.102

Интересует, что происходит при её выполнении.

Cообщение объединено 09 марта 2017, 00:19:34

Цитата: seregareal2 от 08 марта 2017, 17:20:19
Приостановить графическиий процесс это команда init 3 ?

Я не знаю какой у вас DM. Обычно это одна из этих команд:

Код Выделить

/etc/init.d/lightdm stop
/etc/init.d/gdm stop
/etc/init.d/xdm stop

Или если настроено, то нажатие Ctrl-Alt-BackSpace останавливает графический сервер.

seregareal2 · 09 марта 2017, 21:19:21

Открыть содержимое (спойлер)

┌─[seregareal2@parrot]─[~]
└──# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
┌─[seregareal2@parrot]─[~]
└──╼ $

[свернуть]

https://youtu.be/oDdB59JIHSs

ecc83 · 09 марта 2017, 22:06:55

seregareal2, под спойлером только половина файла. Будьте внимательнее.

Я так понял, что у вас две видеокарты? Вторая какая то интел? Она не используется?

seregareal2 · 10 марта 2017, 10:42:56

Не используется
Она идет с материнкой

Вчера пришлось из бекапа систему восстанавливать
Лог sgfxi могу показать только после того как снова систему сломаю установкой дров)
(Достать из под windows)

ecc83 · 10 марта 2017, 10:55:28

Цитата: seregareal2 от 10 марта 2017, 10:42:56
Не используется
Она идет с материнкой

Так вот её нужно занести в blacklist, потому что происходит путаница.

Сначала нужно посмотреть имя её модуля:

Код Выделить

lspci -k | grep -A 3 -E "(VGA|3D)"