Драйвер Intel UHD graphics 600

Автор akarpych, 27 апреля 2018, 08:37:27

« назад - далее »

0 Пользователи и 1 гость просматривают эту тему.

akarpych

Всем привет. Подскажите где взять и как установить драйвер на видео Intel UHD 600? Мать новая asrock j4105.

qupl

Ни о чем не говорит. Нужна техническая информация (см.подпись)

akarpych

#2
 Установил linux mint cayanogen x64 на данную плату. При загрузке на экране появляется надпись что работает в рендерном режиме. Разрешение минимальное. Пытался ставить по такой схеме:
sudo add-apt-repository ppa:oibaf/graphics-drivers
sudo apt-get update
sudo apt-get upgrade
Не помогло. Все тоже самое.
А на последней убунте все встало без проблем из коробки!

mike

На Debian stretch решается просто, если проблема ещё актуальна. :)

QuZ

#4
У меня такая-же проблема, материнская плата -
ASRock j4105.
uname -a
Linux SOM 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1+deb9u2 (2019-05-13) x86_64 GNU/Linux
lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:31f0] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:0000]
00:00.1 Signal processing controller [1180]: Intel Corporation Device [8086:318c] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:318c]
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:3185] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:2212]
00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:c892]
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
00:0f.0 Communication controller [0780]: Intel Corporation Device [8086:319a] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:319a]
00:12.0 SATA controller [0106]: Intel Corporation Device [8086:31e3] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:31e3]
        Kernel driver in use: ahci
        Kernel modules: ahci
00:13.0 PCI bridge [0604]: Intel Corporation Device [8086:31d8] (rev f3)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:13.1 PCI bridge [0604]: Intel Corporation Device [8086:31d9] (rev f3)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:13.2 PCI bridge [0604]: Intel Corporation Device [8086:31da] (rev f3)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:13.3 PCI bridge [0604]: Intel Corporation Device [8086:31db] (rev f3)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:15.0 USB controller [0c03]: Intel Corporation Device [8086:31a8] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:31a8]
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:31e8] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:31e8]
00:1f.1 SMBus [0c05]: Intel Corporation Device [8086:31d4] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:31d4]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
        Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
        Kernel driver in use: r8169
        Kernel modules: r8169
04:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02)
        Subsystem: ASRock Incorporation Motherboard [1849:0612]
        Kernel driver in use: ahci
        Kernel modules: ahci


lsusb
Bus 002 Device 002: ID 0781:5583 SanDisk Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 05d5:6782 Super Gate Technology Co., Ltd
Bus 001 Device 003: ID 09da:000a A4Tech Co., Ltd. Optical Mouse Opto 510D / OP-620D
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


dpkg -l | grep firmw
- ничего не выдал.

Установил на данном железе Debian 10, там данной проблемы не наблюдалось. Но, пришлось сделать откат. С графикой ранее на Linux системах не работал.

Спасибо.

ogost

попробуйте установить пакеты firmware-linux-free и  firmware-linux-nonfree

QuZ

Цитата: ogost от 27 мая 2019, 14:45:03
попробуйте установить пакеты firmware-linux-free и  firmware-linux-nonfree
aptitude install firmware-linux-free
Следующие НОВЫЕ пакеты будут установлены:
  firmware-linux-free
0 пакетов обновлено, 1 установлено новых, 0 пакетов отмечено для удаления, и 0 пакетов не обновлено.
Необходимо получить 19,2 kБ архивов. После распаковки 69,6 kБ будет занято.
Получить: 1 http://deb.debian.org/debian stretch/main amd64 firmware-linux-free all 3.4 [19,2 kB]
Получено 19,2 kБ в 0с (111 kБ/с)
Выбор ранее не выбранного пакета firmware-linux-free.
(Чтение базы данных ... на данный момент установлен 131801 файл и каталог.)
Подготовка к распаковке .../firmware-linux-free_3.4_all.deb ...
Распаковывается firmware-linux-free (3.4) ...
Настраивается пакет firmware-linux-free (3.4) ...
update-initramfs: deferring update (trigger activated)
Обрабатываются триггеры для initramfs-tools (0.130) ...
update-initramfs: Generating /boot/initrd.img-4.9.0-9-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169

root@SOM:/home/quz# aptitude install firmware-linux-nonfree
Не удалось найти пакет совпадающий с «firmware-linux-nonfree», но имеется 1 пакетов, в описании которых содержатся «firmware-linux-nonfree»:
  firmware-linux-free
Не удалось применить некоторые действия, прерываем работу


Ни каких изменений не произошло.

G_r_i_g_a

#7
Цитата: QuZ от 27 мая 2019, 20:15:55Ни каких изменений не произошло.
Попробуй просто поставить мета пакет
apt install firmware-linux
Или отдельно apt install firmware-nonfree

QuZ

сорслисты

deb http://deb.debian.org/debian/ stretch main
deb-src http://deb.debian.org/debian/ stretch main

deb http://security.debian.org/debian-security stretch/updates main
deb-src http://security.debian.org/debian-security stretch/updates main

# stretch-updates, previously known as 'volatile'
deb http://deb.debian.org/debian/ stretch-updates main
deb-src http://deb.debian.org/debian/ stretch-updates main



root@SOM:/home/quz# apt install firmware-linux
Чтение списков пакетов... Готово
Построение дерева зависимостей
Чтение информации о состоянии... Готово
Пакет firmware-linux недоступен, но упомянут в списке зависимостей другого пакета.
Это может означать, что пакет отсутствует, устарел, или доступен из источников, не упомянутых в sources.list

E: Для пакета «firmware-linux» не найден кандидат на установку
root@SOM:/home/quz# apt install firmware-nonfree
Чтение списков пакетов... Готово
Построение дерева зависимостей
Чтение информации о состоянии... Готово
E: Не удалось найти пакет firmware-nonfree


ogost

в сорсе добавить contrib и nonfree:
deb http://deb.debian.org/debian/ stretch main contrib non-free
deb-src http://deb.debian.org/debian/ stretch main contrib non-free

deb http://security.debian.org/debian-security stretch/updates main contrib non-free
deb-src http://security.debian.org/debian-security stretch/updates main contrib non-free

# stretch-updates, previously known as 'volatile'
deb http://deb.debian.org/debian/ stretch-updates main contrib non-free
deb-src http://deb.debian.org/debian/ stretch-updates main contrib non-free

потом apt-get update и apt-get install firmware-linux-nonfree

QuZ

#10
# apt-get install firmware-linux-nonfree
Чтение списков пакетов... Готово
Построение дерева зависимостей
Чтение информации о состоянии... Готово
Будут установлены следующие дополнительные пакеты:
  amd64-microcode firmware-amd-graphics firmware-misc-nonfree intel-microcode iucode-tool
НОВЫЕ пакеты, которые будут установлены:
  amd64-microcode firmware-amd-graphics firmware-linux-nonfree firmware-misc-nonfree intel-microcode iucode-tool
обновлено 0, установлено 6 новых пакетов, для удаления отмечено 0 пакетов, и 0 пакетов не обновлено.
Необходимо скачать 5 925 kБ архивов.
После данной операции, объём занятого дискового пространства возрастёт на 26,1 MB.
Хотите продолжить? [Д/н] y
Пол:1 http://deb.debian.org/debian stretch/non-free amd64 firmware-amd-graphics all 20161130-5 [1 566 kB]
Пол:2 http://security.debian.org/debian-security stretch/updates/non-free amd64 intel-microcode amd64 3.20190514.1~deb9u1 [1 940 kB]
Пол:3 http://deb.debian.org/debian stretch/non-free amd64 firmware-misc-nonfree all 20161130-5 [2 320 kB]
Пол:4 http://deb.debian.org/debian stretch/non-free amd64 firmware-linux-nonfree all 20161130-5 [14,2 kB]
Пол:5 http://deb.debian.org/debian stretch/contrib amd64 iucode-tool amd64 2.1.1-1 [53,3 kB]
Пол:6 http://deb.debian.org/debian stretch/non-free amd64 amd64-microcode amd64 3.20160316.3 [31,1 kB]
Получено 5 925 kБ за 1с (3 659 kБ/c)
Выбор ранее не выбранного пакета firmware-amd-graphics.
(Чтение базы данных ... на данный момент установлено 131835 файлов и каталогов.)
Подготовка к распаковке .../0-firmware-amd-graphics_20161130-5_all.deb ...
Распаковывается firmware-amd-graphics (20161130-5) ...
Выбор ранее не выбранного пакета firmware-misc-nonfree.
Подготовка к распаковке .../1-firmware-misc-nonfree_20161130-5_all.deb ...
Распаковывается firmware-misc-nonfree (20161130-5) ...
Выбор ранее не выбранного пакета firmware-linux-nonfree.
Подготовка к распаковке .../2-firmware-linux-nonfree_20161130-5_all.deb ...
Распаковывается firmware-linux-nonfree (20161130-5) ...
Выбор ранее не выбранного пакета iucode-tool.
Подготовка к распаковке .../3-iucode-tool_2.1.1-1_amd64.deb ...
Распаковывается iucode-tool (2.1.1-1) ...
Выбор ранее не выбранного пакета amd64-microcode.
Подготовка к распаковке .../4-amd64-microcode_3.20160316.3_amd64.deb ...
Распаковывается amd64-microcode (3.20160316.3) ...
Выбор ранее не выбранного пакета intel-microcode.
Подготовка к распаковке .../5-intel-microcode_3.20190514.1~deb9u1_amd64.deb ...
Распаковывается intel-microcode (3.20190514.1~deb9u1) ...
Настраивается пакет firmware-amd-graphics (20161130-5) ...
Настраивается пакет iucode-tool (2.1.1-1) ...
Настраивается пакет firmware-misc-nonfree (20161130-5) ...
update-initramfs: deferring update (trigger activated)
Обрабатываются триггеры для man-db (2.7.6.1-2) ...
Настраивается пакет firmware-linux-nonfree (20161130-5) ...
Настраивается пакет amd64-microcode (3.20160316.3) ...
update-initramfs: deferring update (trigger activated)
amd64-microcode: microcode will be updated at next boot
Настраивается пакет intel-microcode (3.20190514.1~deb9u1) ...
update-initramfs: deferring update (trigger activated)
intel-microcode: microcode will be updated at next boot
Обрабатываются триггеры для initramfs-tools (0.130) ...
update-initramfs: Generating /boot/initrd.img-4.9.0-9-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169



# lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:31f0] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:0000]
00:00.1 Signal processing controller [1180]: Intel Corporation Device [8086:318c] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:318c]
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:3185] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:2212]
00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:c892]
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
00:0f.0 Communication controller [0780]: Intel Corporation Device [8086:319a] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:319a]
00:12.0 SATA controller [0106]: Intel Corporation Device [8086:31e3] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:31e3]
        Kernel driver in use: ahci
        Kernel modules: ahci
00:13.0 PCI bridge [0604]: Intel Corporation Device [8086:31d8] (rev f3)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:13.1 PCI bridge [0604]: Intel Corporation Device [8086:31d9] (rev f3)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:13.2 PCI bridge [0604]: Intel Corporation Device [8086:31da] (rev f3)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:13.3 PCI bridge [0604]: Intel Corporation Device [8086:31db] (rev f3)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:15.0 USB controller [0c03]: Intel Corporation Device [8086:31a8] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:31a8]
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:31e8] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:31e8]
00:1f.1 SMBus [0c05]: Intel Corporation Device [8086:31d4] (rev 03)
        Subsystem: ASRock Incorporation Device [1849:31d4]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
        Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
        Kernel driver in use: r8169
        Kernel modules: r8169
04:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02)
        Subsystem: ASRock Incorporation Motherboard [1849:0612]
        Kernel driver in use: ahci
        Kernel modules: ahci


Пакет поставил, но что то не прокатило(


QuZ

Цитата: qupl от 29 мая 2019, 07:36:24/var/log/Xorg.0.log

[     9.357] (--) Log file renamed from "/var/log/Xorg.pid-522.log" to "/var/log/Xorg.0.log"
[     9.360]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[     9.360] X Protocol Version 11, Revision 0
[     9.360] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[     9.360] Current Operating System: Linux HSL1 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1+deb9u2 (2019-05-13) x86_64
[     9.360] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-amd64 root=UUID=c193a105-16da-4ee4-94b0-5cd20df3d222 ro quiet
[     9.360] Build Date: 03 November 2018  03:09:11AM
[     9.360] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support)
[     9.360] Current version of pixman: 0.34.0
[     9.360]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[     9.360] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.361] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 28 19:49:51 2019
[     9.371] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.377] (==) No Layout section.  Using the first Screen section.
[     9.377] (==) No screen section available. Using defaults.
[     9.377] (**) |-->Screen "Default Screen Section" (0)
[     9.377] (**) |   |-->Monitor "<default monitor>"
[     9.380] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[     9.380] (==) Automatically adding devices
[     9.380] (==) Automatically enabling devices
[     9.380] (==) Automatically adding GPU devices
[     9.380] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     9.399] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     9.399]    Entry deleted from font path.
[     9.414] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[     9.414] (==) ModulePath set to "/usr/lib/xorg/modules"
[     9.414] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.414] (II) Loader magic: 0x557fa4307e00
[     9.414] (II) Module ABI versions:
[     9.414]    X.Org ANSI C Emulation: 0.4
[     9.414]    X.Org Video Driver: 23.0
[     9.414]    X.Org XInput driver : 24.1
[     9.414]    X.Org Server Extension : 10.0
[     9.415] (++) using VT number 7

[     9.415] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     9.416] (--) PCI:*(0:0:2:0) 8086:3185:1849:2212 rev 3, Mem @ 0xa0000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     9.417] (II) LoadModule: "glx"
[     9.421] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     9.463] (II) Module glx: vendor="X.Org Foundation"
[     9.463]    compiled for 1.19.2, module version = 1.0.0
[     9.463]    ABI class: X.Org Server Extension, version 10.0
[     9.463] (==) Matched modesetting as autoconfigured driver 0
[     9.463] (==) Matched fbdev as autoconfigured driver 1
[     9.463] (==) Matched vesa as autoconfigured driver 2
[     9.463] (==) Assigned the driver to the xf86ConfigLayout
[     9.463] (II) LoadModule: "modesetting"
[     9.463] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     9.466] (II) Module modesetting: vendor="X.Org Foundation"
[     9.466]    compiled for 1.19.2, module version = 1.19.2
[     9.466]    Module class: X.Org Video Driver
[     9.466]    ABI class: X.Org Video Driver, version 23.0
[     9.466] (II) LoadModule: "fbdev"
[     9.466] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     9.466] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     9.468] (II) Module fbdev: vendor="X.Org Foundation"
[     9.468]    compiled for 1.19.0, module version = 0.4.4
[     9.468]    Module class: X.Org Video Driver
[     9.469]    ABI class: X.Org Video Driver, version 23.0
[     9.469] (II) LoadModule: "vesa"
[     9.469] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     9.471] (II) Module vesa: vendor="X.Org Foundation"
[     9.471]    compiled for 1.19.0, module version = 2.3.4
[     9.471]    Module class: X.Org Video Driver
[     9.471]    ABI class: X.Org Video Driver, version 23.0
[     9.471] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     9.472] (II) FBDEV: driver for framebuffer: fbdev
[     9.472] (II) VESA: driver for VESA chipsets: vesa
[     9.474] (EE) open /dev/dri/card0: No such file or directory
[     9.474] (WW) Falling back to old probe method for modesetting
[     9.474] (EE) open /dev/dri/card0: No such file or directory
[     9.474] (II) Loading sub module "fbdevhw"
[     9.474] (II) LoadModule: "fbdevhw"
[     9.474] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     9.478] (II) Module fbdevhw: vendor="X.Org Foundation"
[     9.478]    compiled for 1.19.2, module version = 0.0.2
[     9.478]    ABI class: X.Org Video Driver, version 23.0
[     9.478] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[     9.478] (II) FBDEV(1): using default device
[     9.478] (WW) Falling back to old probe method for vesa
[     9.478] (EE) Screen 0 deleted because of no matching config section.
[     9.478] (II) UnloadModule: "modesetting"
[     9.478] (II) FBDEV(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[     9.478] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     9.478] (==) FBDEV(0): RGB weight 888
[     9.478] (==) FBDEV(0): Default visual is TrueColor
[     9.478] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     9.478] (II) FBDEV(0): hardware: EFI VGA (video memory: 1920kB)
[     9.478] (II) FBDEV(0): checking modes against framebuffer device...
[     9.478] (II) FBDEV(0): checking modes against monitor...
[     9.478] (--) FBDEV(0): Virtual size is 800x600 (pitch 800)
[     9.478] (**) FBDEV(0):  Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz
[     9.478] (II) FBDEV(0): Modeline "current"x0.0   48.00  800 832 928 1024  600 604 608 624 -hsync -vsync -csync (46.9 kHz b)
[     9.478] (==) FBDEV(0): DPI set to (96, 96)
[     9.478] (II) Loading sub module "fb"
[     9.478] (II) LoadModule: "fb"
[     9.479] (II) Loading /usr/lib/xorg/modules/libfb.so
[     9.485] (II) Module fb: vendor="X.Org Foundation"
[     9.485]    compiled for 1.19.2, module version = 1.0.0
[     9.485]    ABI class: X.Org ANSI C Emulation, version 0.4
[     9.485] (**) FBDEV(0): using shadow framebuffer
[     9.485] (II) Loading sub module "shadow"
[     9.485] (II) LoadModule: "shadow"
[     9.485] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     9.488] (II) Module shadow: vendor="X.Org Foundation"
[     9.488]    compiled for 1.19.2, module version = 1.1.0
[     9.488]    ABI class: X.Org ANSI C Emulation, version 0.4
[     9.488] (II) UnloadModule: "vesa"
[     9.488] (II) Unloading vesa
[     9.488] (==) Depth 24 pixmap format is 32 bpp
[     9.488] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[     9.501] (==) FBDEV(0): Backing store enabled
[     9.503] (==) FBDEV(0): DPMS enabled
[     9.505] (==) RandR enabled
[     9.511] (II) SELinux: Disabled on system
[     9.513] (II) AIGLX: Screen 0 is not DRI2 capable
[     9.513] (EE) AIGLX: reverting to software rendering
[    10.025] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[    10.025] (II) IGLX: Loaded and initialized swrast
[    10.025] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    10.188] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    10.189] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    10.189] (II) LoadModule: "libinput"
[    10.189] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    10.206] (II) Module libinput: vendor="X.Org Foundation"
[    10.206]    compiled for 1.19.0, module version = 0.23.0
[    10.206]    Module class: X.Org XInput Driver
[    10.206]    ABI class: X.Org XInput driver, version 24.1
[    10.206] (II) Using input driver 'libinput' for 'Power Button'
[    10.206] (**) Power Button: always reports core events
[    10.206] (**) Option "Device" "/dev/input/event3"
[    10.207] (**) Option "_source" "server/udev"
[    10.207] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    10.207] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    10.220] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    10.220] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    10.220] (**) Option "xkb_model" "pc105"
[    10.220] (**) Option "xkb_layout" "us"
[    10.222] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    10.222] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    10.224] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10)
[    10.224] (II) No input driver specified, ignoring this device.
[    10.224] (II) This device may have been added with another device file.
[    10.226] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event11)
[    10.226] (II) No input driver specified, ignoring this device.
[    10.226] (II) This device may have been added with another device file.
[    10.227] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event12)
[    10.227] (II) No input driver specified, ignoring this device.
[    10.227] (II) This device may have been added with another device file.
[    10.229] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event13)
[    10.229] (II) No input driver specified, ignoring this device.
[    10.229] (II) This device may have been added with another device file.
[    10.230] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    10.230] (II) No input driver specified, ignoring this device.
[    10.231] (II) This device may have been added with another device file.
[    10.232] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[    10.232] (II) No input driver specified, ignoring this device.
[    10.232] (II) This device may have been added with another device file.
[    10.232] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[    10.232] (II) No input driver specified, ignoring this device.
[    10.232] (II) This device may have been added with another device file.
[    10.233] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[    10.233] (II) No input driver specified, ignoring this device.
[    10.233] (II) This device may have been added with another device file.
[    10.233] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event9)
[    10.233] (II) No input driver specified, ignoring this device.
[    10.233] (II) This device may have been added with another device file.
[    10.234] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/event14)
[    10.234] (**) A4Tech PS/2+USB Mouse: Applying InputClass "libinput pointer catchall"
[    10.234] (II) Using input driver 'libinput' for 'A4Tech PS/2+USB Mouse'
[    10.234] (**) A4Tech PS/2+USB Mouse: always reports core events
[    10.234] (**) Option "Device" "/dev/input/event14"
[    10.234] (**) Option "_source" "server/udev"
[    10.293] (II) input device 'A4Tech PS/2+USB Mouse', /dev/input/event14 is tagged by udev as: Mouse
[    10.293] (II) input device 'A4Tech PS/2+USB Mouse', /dev/input/event14 is a pointer caps
[    10.332] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4:1.0/0003:09DA:000A.0001/input/input14/event14"
[    10.332] (II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE, id 7)
[    10.333] (**) Option "AccelerationScheme" "none"
[    10.333] (**) A4Tech PS/2+USB Mouse: (accel) selected scheme none/0
[    10.333] (**) A4Tech PS/2+USB Mouse: (accel) acceleration factor: 2.000
[    10.333] (**) A4Tech PS/2+USB Mouse: (accel) acceleration threshold: 4
[    10.393] (II) input device 'A4Tech PS/2+USB Mouse', /dev/input/event14 is tagged by udev as: Mouse
[    10.393] (II) input device 'A4Tech PS/2+USB Mouse', /dev/input/event14 is a pointer caps
[    10.395] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/mouse1)
[    10.395] (II) No input driver specified, ignoring this device.
[    10.395] (II) This device may have been added with another device file.
[    10.397] (II) config/udev: Adding input device KEYBOARD USB KB (/dev/input/event1)
[    10.397] (**) KEYBOARD USB KB: Applying InputClass "libinput keyboard catchall"
[    10.397] (II) Using input driver 'libinput' for 'KEYBOARD USB KB'
[    10.398] (**) KEYBOARD USB KB: always reports core events
[    10.398] (**) Option "Device" "/dev/input/event1"
[    10.398] (**) Option "_source" "server/udev"
[    10.399] (II) input device 'KEYBOARD USB KB', /dev/input/event1 is tagged by udev as: Keyboard
[    10.399] (II) input device 'KEYBOARD USB KB', /dev/input/event1 is a keyboard
[    10.432] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.0/0003:05D5:6782.0002/input/input1/event1"
[    10.432] (II) XINPUT: Adding extended input device "KEYBOARD USB KB" (type: KEYBOARD, id 8)
[    10.432] (**) Option "xkb_model" "pc105"
[    10.432] (**) Option "xkb_layout" "us"
[    10.434] (II) input device 'KEYBOARD USB KB', /dev/input/event1 is tagged by udev as: Keyboard
[    10.434] (II) input device 'KEYBOARD USB KB', /dev/input/event1 is a keyboard
[    10.437] (II) config/udev: Adding input device KEYBOARD USB KB (/dev/input/event2)
[    10.437] (**) KEYBOARD USB KB: Applying InputClass "libinput pointer catchall"
[    10.437] (**) KEYBOARD USB KB: Applying InputClass "libinput keyboard catchall"
[    10.437] (II) Using input driver 'libinput' for 'KEYBOARD USB KB'
[    10.437] (**) KEYBOARD USB KB: always reports core events
[    10.437] (**) Option "Device" "/dev/input/event2"
[    10.438] (**) Option "_source" "server/udev"
[    10.440] (II) input device 'KEYBOARD USB KB', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[    10.440] (II) input device 'KEYBOARD USB KB', /dev/input/event2 is a pointer caps
[    10.440] (II) input device 'KEYBOARD USB KB', /dev/input/event2 is a keyboard
[    10.472] (II) libinput: KEYBOARD USB KB: needs a virtual subdevice
[    10.472] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:05D5:6782.0003/input/input2/event2"
[    10.472] (II) XINPUT: Adding extended input device "KEYBOARD USB KB" (type: MOUSE, id 9)
[    10.472] (**) Option "AccelerationScheme" "none"
[    10.473] (**) KEYBOARD USB KB: (accel) selected scheme none/0
[    10.473] (**) KEYBOARD USB KB: (accel) acceleration factor: 2.000
[    10.473] (**) KEYBOARD USB KB: (accel) acceleration threshold: 4
[    10.475] (II) input device 'KEYBOARD USB KB', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[    10.475] (II) input device 'KEYBOARD USB KB', /dev/input/event2 is a pointer caps
[    10.475] (II) input device 'KEYBOARD USB KB', /dev/input/event2 is a keyboard
[    10.477] (II) config/udev: Adding input device KEYBOARD USB KB (/dev/input/mouse0)
[    10.477] (II) No input driver specified, ignoring this device.
[    10.477] (II) This device may have been added with another device file.
[    10.479] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    10.479] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    10.479] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    10.479] (**) AT Translated Set 2 keyboard: always reports core events
[    10.479] (**) Option "Device" "/dev/input/event0"
[    10.479] (**) Option "_source" "server/udev"
[    10.481] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    10.481] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    10.516] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    10.516] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    10.516] (**) Option "xkb_model" "pc105"
[    10.516] (**) Option "xkb_layout" "us"
[    10.518] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    10.518] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    10.519] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    10.519] (II) No input driver specified, ignoring this device.
[    10.519] (II) This device may have been added with another device file.
[    10.535] (**) KEYBOARD USB KB: Applying InputClass "libinput pointer catchall"
[    10.535] (**) KEYBOARD USB KB: Applying InputClass "libinput keyboard catchall"
[    10.535] (II) Using input driver 'libinput' for 'KEYBOARD USB KB'
[    10.536] (**) KEYBOARD USB KB: always reports core events
[    10.536] (**) Option "Device" "/dev/input/event2"
[    10.536] (**) Option "_source" "_driver/libinput"
[    10.536] (II) libinput: KEYBOARD USB KB: is a virtual subdevice
[    10.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.1/0003:05D5:6782.0003/input/input2/event2"
[    10.536] (II) XINPUT: Adding extended input device "KEYBOARD USB KB" (type: KEYBOARD, id 11)
[    10.536] (**) Option "xkb_model" "pc105"
[    10.536] (**) Option "xkb_layout" "us"

qupl

Тут - ссылка, пишут про успех с подобной видеокартой. Выше в теме mike отписывался, что заработало. У Вас почему-то модуль интел не загрузился.
Посмотрите еще ошибки при загрузке
sudo dmesg | grep -ie error -ie fail

QuZ

#14
Цитата: qupl от 29 мая 2019, 13:21:57
Тут - ссылка, пишут про успех с подобной видеокартой. Выше в теме mike отписывался, что заработало. У Вас почему-то модуль интел не загрузился.
Посмотрите еще ошибки при загрузке
sudo dmesg | grep -ie error -ie fail

Спасибо, сейчас посмотрю.

[    5.666110] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
[    9.190180] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168h-2.fw (-2)
[    9.190228] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2



dpkg -l | grep firmw
ii  amd64-microcode                               3.20160316.3                               amd64        Processor microcode firmware for AMD CPUs
ii  firmware-amd-graphics                         20161130-5                                 all          Binary firmware for AMD/ATI graphics chips
ii  firmware-linux-free                           3.4                                        all          Binary firmware for various drivers in the Linux kernel
ii  firmware-linux-nonfree                        20161130-5                                 all          Binary firmware for various drivers in the Linux kernel (meta-package)
ii  firmware-misc-nonfree                         20161130-5                                 all          Binary firmware for various drivers in the Linux kernel
ii  intel-microcode                               3.20190514.1~deb9u1                        amd64        Processor microcode firmware for Intel CPUs