Автор Тема: Проблема с настройкой Samba на Debian 10 и Windows 10  (Прочитано 1253 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн ZGi

  • Новичок форума
  • Topic Author
  • Сообщений: 5
Извиняюсь если не выкладываю на соответствующую тему. Уже несколько дней не могу настроить Samba на Debian 10 (buster), Я искал много форумов и в Google, но все конфигурации который я нашел не хотят работать на моей машине с Debian 10. Если есть кто-то, кто может мне помочь, я буду очень благодарен.


вот текущая конфигурация
#cat /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP
usershare allow guests = yes
#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
   logging = file

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = yes
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = yes
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

[shara]
  comment = Public share where archie has write access
  path = /home/debuser/share
  public = yes
  read only = yes
  printable = no
domain master = auto
guest_ok = yes

#testparm
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Registered MSG_REQ_POOL_USAGE
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
Processing section "[printers]"
Processing section "[print$]"
Processing section "[shara]"
Global parameter domain master found in service section!
Unknown parameter encountered: "guest_ok"
Ignoring unknown parameter "guest_ok"
Loaded services file OK.
Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

# Global parameters
[global]
log file = /var/log/samba/log.%m
logging = file
map to guest = Bad User
max log size = 1000
obey pam restrictions = Yes
pam password change = Yes
panic action = /usr/share/samba/panic-action %d
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
passwd program = /usr/bin/passwd %u
server role = standalone server
unix password sync = Yes
usershare allow guests = Yes
idmap config * : backend = tdb


[homes]
browseable = No
comment = Home Directories
create mask = 0700
directory mask = 0700
valid users = %S


[printers]
browseable = No
comment = All Printers
create mask = 0700
guest ok = Yes
path = /var/spool/samba
printable = Yes


[print$]
comment = Printer Drivers
guest ok = Yes
path = /var/lib/samba/printers


[shara]
comment = Public share where archie has write access
guest ok = Yes
path = /home/debuser/share

#smbclient -L localhost -d 9
INFO: Current debug levels:
  all: 9
  tdb: 9
  printdrivers: 9
  lanman: 9
  smb: 9
  rpc_parse: 9
  rpc_srv: 9
  rpc_cli: 9
  passdb: 9
  sam: 9
  auth: 9
  winbind: 9
  vfs: 9
  idmap: 9
  quota: 9
  acls: 9
  locking: 9
  msdfs: 9
  dmapi: 9
  registry: 9
  scavenger: 9
  dns: 9
  ldb: 9
  tevent: 9
  auth_audit: 9
  auth_json_audit: 9
  kerberos: 9
  drs_repl: 9
  smb2: 9
  smb2_credits: 9
  dsdb_audit: 9
  dsdb_json_audit: 9
  dsdb_password_audit: 9
  dsdb_password_json_audit: 9
  dsdb_transaction_audit: 9
  dsdb_transaction_json_audit: 9
  dsdb_group_audit: 9
  dsdb_group_json_audit: 9
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
INFO: Current debug levels:
  all: 9
  tdb: 9
  printdrivers: 9
  lanman: 9
  smb: 9
  rpc_parse: 9
  rpc_srv: 9
  rpc_cli: 9
  passdb: 9
  sam: 9
  auth: 9
  winbind: 9
  vfs: 9
  idmap: 9
  quota: 9
  acls: 9
  locking: 9
  msdfs: 9
  dmapi: 9
  registry: 9
  scavenger: 9
  dns: 9
  ldb: 9
  tevent: 9
  auth_audit: 9
  auth_json_audit: 9
  kerberos: 9
  drs_repl: 9
  smb2: 9
  smb2_credits: 9
  dsdb_audit: 9
  dsdb_json_audit: 9
  dsdb_password_audit: 9
  dsdb_password_json_audit: 9
  dsdb_transaction_audit: 9
  dsdb_transaction_json_audit: 9
  dsdb_group_audit: 9
  dsdb_group_json_audit: 9
Processing section "[global]"
doing parameter workgroup = WORKGROUP
doing parameter usershare allow guests = yes
doing parameter log file = /var/log/samba/log.%m
doing parameter max log size = 1000
doing parameter logging = file
doing parameter panic action = /usr/share/samba/panic-action %d
doing parameter server role = standalone server
doing parameter obey pam restrictions = yes
doing parameter unix password sync = yes
doing parameter passwd program = /usr/bin/passwd %u
doing parameter passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
doing parameter pam password change = yes
doing parameter map to guest = bad user
doing parameter usershare allow guests = yes
pm_process() returned Yes
lp_servicenumber: couldn't find homes
Registering messaging pointer for type 2 - private_data=(nil)
Registering messaging pointer for type 9 - private_data=(nil)
Registered MSG_REQ_POOL_USAGE
Registering messaging pointer for type 11 - private_data=(nil)
Registering messaging pointer for type 12 - private_data=(nil)
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
Registering messaging pointer for type 1 - private_data=(nil)
Registering messaging pointer for type 5 - private_data=(nil)
Registering messaging pointer for type 51 - private_data=(nil)
lp_load_ex: refreshing parameters
Freeing parametrics:
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
INFO: Current debug levels:
  all: 9
  tdb: 9
  printdrivers: 9
  lanman: 9
  smb: 9
  rpc_parse: 9
  rpc_srv: 9
  rpc_cli: 9
  passdb: 9
  sam: 9
  auth: 9
  winbind: 9
  vfs: 9
  idmap: 9
  quota: 9
  acls: 9
  locking: 9
  msdfs: 9
  dmapi: 9
  registry: 9
  scavenger: 9
  dns: 9
  ldb: 9
  tevent: 9
  auth_audit: 9
  auth_json_audit: 9
  kerberos: 9
  drs_repl: 9
  smb2: 9
  smb2_credits: 9
  dsdb_audit: 9
  dsdb_json_audit: 9
  dsdb_password_audit: 9
  dsdb_password_json_audit: 9
  dsdb_transaction_audit: 9
  dsdb_transaction_json_audit: 9
  dsdb_group_audit: 9
  dsdb_group_json_audit: 9
Processing section "[global]"
doing parameter workgroup = WORKGROUP
doing parameter usershare allow guests = yes
doing parameter log file = /var/log/samba/log.%m
doing parameter max log size = 1000
doing parameter logging = file
doing parameter panic action = /usr/share/samba/panic-action %d
doing parameter server role = standalone server
doing parameter obey pam restrictions = yes
doing parameter unix password sync = yes
doing parameter passwd program = /usr/bin/passwd %u
doing parameter passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
doing parameter pam password change = yes
doing parameter map to guest = bad user
doing parameter usershare allow guests = yes
pm_process() returned Yes
lp_servicenumber: couldn't find homes
added interface enp2s0 ip=fd5b:44c1:53e1:0:52e5:49ff:fe1d:de7 bcast= netmask=ffff:ffff:ffff:ffff::
added interface enp2s0 ip=192.168.1.100 bcast=192.168.1.255 netmask=255.255.255.0
added interface virbr1 ip=192.168.100.1 bcast=192.168.100.255 netmask=255.255.255.0
Netbios name list:-
my_netbios_names[0]="D10HOST"
Client started (version 4.9.5-Debian).
Opening cache file at /var/cache/samba/gencache.tdb
Opening cache file at /var/run/samba/gencache_notrans.tdb
sitename_fetch: No stored sitename for realm ''
name localhost#20 found.
Connecting to ::1 at port 445
Socket options:
SO_KEEPALIVE = 0
SO_REUSEADDR = 0
SO_BROADCAST = 0
TCP_NODELAY = 1
TCP_KEEPCNT = 9
TCP_KEEPIDLE = 7200
TCP_KEEPINTVL = 75
IPTOS_LOWDELAY = 0
IPTOS_THROUGHPUT = 0
SO_REUSEPORT = 0
SO_SNDBUF = 2626560
SO_RCVBUF = 1061504
SO_SNDLOWAT = 1
SO_RCVLOWAT = 1
SO_SNDTIMEO = 0
SO_RCVTIMEO = 0
TCP_QUICKACK = 1
TCP_DEFER_ACCEPT = 0
 session request ok
 negotiated dialect[SMB3_11] against server[localhost]
got OID=1.3.6.1.4.1.311.2.2.10
Enter WORKGROUP\root's password:
GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'spnego' registered
GENSEC backend 'schannel' registered
GENSEC backend 'naclrpc_as_system' registered
GENSEC backend 'sasl-EXTERNAL' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'ntlmssp_resume_ccache' registered
GENSEC backend 'http_basic' registered
GENSEC backend 'http_ntlm' registered
GENSEC backend 'http_negotiate' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
Starting GENSEC mechanism spnego
Starting GENSEC submechanism ntlmssp
Got challenge flags:
Got NTLMSSP neg_flags=0x628a8215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_TARGET_TYPE_SERVER
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_TARGET_INFO
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
short string '', sent with NULL termination despite NOTERM flag in IDL
short string '', sent with NULL termination despite NOTERM flag in IDL
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62088215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62088215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
 session setup ok
 tconx ok

Sharename       Type      Comment
---------       ----      -------
Bind RPC Pipe: host localhost auth_type 0, auth_level 1
rpc_api_pipe: host localhost
rpc_read_send: data_to_read: 52
check_bind_response: accepted!
rpc_api_pipe: host localhost
rpc_read_send: data_to_read: 456
print$          Disk      Printer Drivers
shara           Disk      Public share where archie has write access
IPC$            IPC       IPC Service (Samba 4.9.5-Debian)
share           Disk      guest_ok=y
Reconnecting with SMB1 for workgroup listing.
sitename_fetch: No stored sitename for realm ''
name localhost#20 found.
Connecting to ::1 at port 139
Socket options:
SO_KEEPALIVE = 0
SO_REUSEADDR = 0
SO_BROADCAST = 0
TCP_NODELAY = 1
TCP_KEEPCNT = 9
TCP_KEEPIDLE = 7200
TCP_KEEPINTVL = 75
IPTOS_LOWDELAY = 0
IPTOS_THROUGHPUT = 0
SO_REUSEPORT = 0
SO_SNDBUF = 2626560
SO_RCVBUF = 1061504
SO_SNDLOWAT = 1
SO_RCVLOWAT = 1
SO_SNDTIMEO = 0
SO_RCVTIMEO = 0
TCP_QUICKACK = 1
TCP_DEFER_ACCEPT = 0
 session request ok
 negotiated dialect[NT1] against server[localhost]
got OID=1.3.6.1.4.1.311.2.2.10
Starting GENSEC mechanism spnego
Starting GENSEC submechanism ntlmssp
Got challenge flags:
Got NTLMSSP neg_flags=0x628a8215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_TARGET_TYPE_SERVER
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_TARGET_INFO
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
short string '', sent with NULL termination despite NOTERM flag in IDL
short string '', sent with NULL termination despite NOTERM flag in IDL
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62088215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62088215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
 session setup ok
 tconx ok

Server               Comment
---------            -------

Workgroup            Master
---------            -------
WORKGROUP            D10WSTATION

порты 137, 138, 139 в UFW открыты
chmod 755 on share folder
спасибо
 

Оффлайн red_rain

  • Активный пользователь
  • **
  • Сообщений: 65
Re: Проблема с настройкой Samba на Debian 10 и Windows 10
« Ответ #1 : 18 Январь 2020, 10:08:26 »
Нууу samba то ещё гемор. Я всегда научным тыком настраивал.
Лучшие мануалы гуглятся позапросу настройка cifs debian.
Я по этому нануалу настраивал: https://proft.me/2013/09/1/samba-nastrojka-fajlovogo-obmena-mezhdu-windows-i-/
Там ещё надо смотреть выхлоп логов и дополнительно править.
 
Пользователи, которые поблагодарили этот пост: ZGi

Оффлайн ZGi

  • Новичок форума
  • Topic Author
  • Сообщений: 5
Re: Проблема с настройкой Samba на Debian 10 и Windows 10
« Ответ #2 : 20 Январь 2020, 14:13:46 »
Заработал сервер, но не понял в чём была причина. По моему cifs не был настроен коректно. спасибо 
 


Оффлайн flaxible

  • Новичок форума
  • Сообщений: 1
Re: Проблема с настройкой Samba на Debian 10 и Windows 10
« Ответ #3 : 07 Февраль 2020, 22:42:28 »
Всем привет, похоже проблема в пакете gvfs-backends для buster,
apt-get -t bullseye install gvfs-backends решает проблему, решение так же актуально к теме: Samba на Debian 10 не видит сеть Windows.
 

Оффлайн Separ

  • Новичок форума
  • Сообщений: 6
Салам, может кто подскажет, я на LMDE4 начал поход и samba  не работает,  точнее не могу настроить как тс писал но мне не помоголо, на минтовский форум прошу не отсылать?
 

Оффлайн NikitOK

  • Новичок форума
  • Сообщений: 2
Unknown parameter encountered: "guest_ok"
Ignoring unknown parameter "guest_ok"

guest ok
в этом наверное крылась причина.
 

 

Проблема с dnsmasq

Автор ShoTo

Ответов: 4
Просмотров: 1848
Последний ответ 15 Октябрь 2015, 13:48:56
от ShoTo
Проблема с отображением списка доступных Wifi сетей

Автор kot-x120

Ответов: 4
Просмотров: 3803
Последний ответ 25 Август 2011, 17:45:03
от kot-x120
UCARP. Проблема - постоянно переключение между master и slave

Автор keeper13

Ответов: 0
Просмотров: 1762
Последний ответ 05 Июль 2016, 18:38:18
от keeper13
проблема с openvpn клиентом

Автор exFirst

Ответов: 0
Просмотров: 1254
Последний ответ 21 Апрель 2018, 21:00:53
от exFirst
Проблема с WiFi адаптером Ralink RT5370

Автор ShoTo

Ответов: 2
Просмотров: 12007
Последний ответ 14 Сентябрь 2012, 12:47:14
от ShoTo