Проблема с Debian Wheezy

Автор McArcher, 04 декабря 2011, 20:23:18

« назад - далее »

0 Пользователи и 1 гость просматривают эту тему.

McArcher

Скачал новейший релиз Wheezy (от 28.11.2011). Возникают проблемы при установке.

1. В графическом режиме не работает ни клава, ни мышь! В стабильном релизе хотя бы только мышь не работала.

2. Не определился мой DHCP сервер. В стабильной определялся.

3. Устанавливать графическую оболочку пришлось вручную. (Может так и должно быть?)

4. После установки gnome, выдаётся ошибка что третий гном не запускается и мы работаем в каком-то там урезанном режиме.

5. После запуска в GUI, сеть появилась, но не запускаются "источники приложений".

6. Добавил вручную в /etc/apt/sources.list строку
Цитироватьdeb http://ftp.debian.org/debian/ testing main contrib non-free
, ставлю дрова видеокарты...
.теперь gnome 3 заработал...лучше бы он не работал  ;D это ж пипец, что они сотворили...  :o

Сообщение объединено: 04 декабря 2011, 20:45:42

Как теперь редактировать меню?
Как сделать панель снизу?

paulcarroty

Это ТЕСТОВАЯ ветка, возможно все.

McArcher

#2
Получив новейшие IceWeasel 8 и VLC 1.1.12, я также получил невозможность установки CUPS и принтера как следствие... блин... почему ж всё такое кривое?...

Открыть содержимое (спойлер)
Для просмотрщика gtk требуется рабочий python-gtk2 и python-glade2.
Эти библиотеки не найдены. Будет использован pager.
Ошибка: No module named glade
Предварительная настройка пакетов ...
Selecting previously unselected package cups.
(Чтение базы данных ... на данный момент установлено 128030 файлов и каталогов.)
Распаковывается пакет cups (из файла .../c/cups/cups_1.5.0-12_amd64.deb)...
Selecting previously unselected package cups-driver-gutenprint.
Распаковывается пакет cups-driver-gutenprint (из файла .../cups-driver-gutenprint_5.2.7-2_amd64.deb)...
Обрабатываются триггеры для man-db ...
Настраивается пакет cups (1.5.0-12) ...
insserv: warning: script 'K07smfpd' missing LSB tags and overrides
insserv: warning: script 'smfpd' missing LSB tags and overrides
insserv: There is a loop between service rc.local and mountnfs if started
insserv:  loop involving service mountnfs at depth 6
insserv:  loop involving service nfs-common at depth 5
insserv: There is a loop between service rc.local and checkroot if started
insserv:  loop involving service checkroot at depth 3
insserv:  loop involving service keyboard-setup at depth 2
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv:  loop involving service rsyslog at depth 9
insserv:  loop involving service fuse at depth 10
insserv: There is a loop between service rc.local and mountall if started
insserv:  loop involving service mountall at depth 5
insserv:  loop involving service checkfs at depth 4
insserv: There is a loop between service rc.local and ifupdown-clean if started
insserv:  loop involving service ifupdown-clean at depth 3
insserv:  loop involving service mountdevsubfs at depth 2
insserv: There is a loop at service smfpd if started
insserv:  loop involving service mtab at depth 4
insserv:  loop involving service networking at depth 7
insserv: There is a loop at service rc.local if started
insserv:  loop involving service kbd at depth 11
insserv:  loop involving service module-init-tools at depth 4
insserv:  loop involving service smfpd at depth 1
insserv:  loop involving service hwclockfirst at depth 4
insserv:  loop involving service hostname at depth 5
insserv: There is a loop between service rc.local and mountdevsubfs if started
insserv: There is a loop between service rc.local and mountall-bootclean if started
insserv:  loop involving service mountall-bootclean at depth 1
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: не удалось обработать параметр cups (--configure):
подпроцесс установлен сценарий post-installation возвратил код ошибки 1
dpkg: зависимости пакетов не позволяют настроить пакет cups-driver-gutenprint:
cups-driver-gutenprint зависит от cups (>= 1.3.0), однако:
  Пакет cups пока не настроен.
dpkg: не удалось обработать параметр cups-driver-gutenprint (--configure):
проблемы зависимостей -- оставляем не настроенным
configured to not write apport reports
                                      configured to not write apport reports
                                                                            При обработке следующих пакетов произошли ошибки:
cups
cups-driver-gutenprint
E: Sub-process /usr/bin/dpkg returned an error code (1)
Ошибка при установке пакета. Попытка восстановления:
Настраивается пакет cups (1.5.0-12) ...
insserv: warning: script 'K07smfpd' missing LSB tags and overrides
insserv: warning: script 'smfpd' missing LSB tags and overrides
insserv: There is a loop between service rc.local and mountnfs if started
insserv:  loop involving service mountnfs at depth 6
insserv:  loop involving service nfs-common at depth 5
insserv: There is a loop between service rc.local and checkroot if started
insserv:  loop involving service checkroot at depth 3
insserv:  loop involving service keyboard-setup at depth 2
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting smfpd depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv:  loop involving service rsyslog at depth 9
insserv:  loop involving service fuse at depth 10
insserv: There is a loop between service rc.local and mountall if started
insserv:  loop involving service mountall at depth 5
insserv:  loop involving service checkfs at depth 4
insserv: There is a loop between service rc.local and ifupdown-clean if started
insserv:  loop involving service ifupdown-clean at depth 3
insserv:  loop involving service mountdevsubfs at depth 2
insserv: There is a loop at service smfpd if started
insserv:  loop involving service mtab at depth 4
insserv:  loop involving service networking at depth 7
insserv: There is a loop at service rc.local if started
insserv:  loop involving service kbd at depth 11
insserv:  loop involving service module-init-tools at depth 4
insserv:  loop involving service smfpd at depth 1
insserv:  loop involving service hwclockfirst at depth 4
insserv:  loop involving service hostname at depth 5
insserv: There is a loop between service rc.local and mountdevsubfs if started
insserv: There is a loop between service rc.local and mountall-bootclean if started
insserv:  loop involving service mountall-bootclean at depth 1
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: не удалось обработать параметр cups (--configure):
подпроцесс установлен сценарий post-installation возвратил код ошибки 1
dpkg: зависимости пакетов не позволяют настроить пакет cups-driver-gutenprint:
cups-driver-gutenprint зависит от cups (>= 1.3.0), однако:
  Пакет cups пока не настроен.
dpkg: не удалось обработать параметр cups-driver-gutenprint (--configure):
проблемы зависимостей -- оставляем не настроенным
При обработке следующих пакетов произошли ошибки:
cups
cups-driver-gutenprint

[свернуть]

Сообщение объединено: 04 декабря 2011, 23:27:39

Установил python-glade2, на который ругались, ошибка cups вылезает всё равно. :(

SeHELLioN

Asus m5a97+Amd fx-8350+4x4GB DDR3 1600MGz+asus gtx670 DCII (перешита в top)
Debian stable

lisss

ЦитироватьНе определился мой DHCP сервер. В стабильной определялся.
это как это?

McArcher

Цитата: lisss от 05 декабря 2011, 14:17:21
ЦитироватьНе определился мой DHCP сервер. В стабильной определялся.
это как это?
Сам не представляю как так могло получиться.

В общем, пришлось поставить Xubuntu 11.10, о чём теперь ни капли не жалею. Это ведь тоже из семейства Debian. Надеюсь это не считается оффтопом. Теперь нормально работает и новейший CUPS, и последний VLC, и PulseAudio не глючит и не дёргает звук (иногда дёргал на debian wheezy), ползунки громкости приложений и железа теперь работают по-другому, так как я и ожидал (в дебиане не так было).

Правда, теперь некоторый софт ставится криво. Например, графическая установка драйвера принтера Samsung запустилась в текстовом режиме (ругалась на qt), и потом вообще вылетела в окно логина юзера (!). Но драйвер установился, пришлось просто вручную принтер добавлять.

В целом Xfce меня радует больше gnome 2/3.
Было бы здорово, если бы следующая стабильная версия Debian вышла не на gnome3, а на xfce!

SeHELLioN

ЦитироватьБыло бы здорово, если бы следующая стабильная версия Debian вышла не на gnome3, а на xfce!
Так дебиан же сразу и с kde и c gnome и с крыской идёт....Неужели инсталятор и aptitude на столько сложны в использовании? ;D
Asus m5a97+Amd fx-8350+4x4GB DDR3 1600MGz+asus gtx670 DCII (перешита в top)
Debian stable

Brainey

Открыть содержимое (спойлер)
ЦитироватьБыло бы здорово, если бы следующая стабильная версия Debian вышла не на gnome3, а на xfce!
Было бы здорово, если бы все наконец-то поняли, что в Debian нет "рабочего стола по умолчанию" как в некоторых коричнево-черно-фиолетовых дистрибутивах.
[свернуть]
Конференция форума в jabber: debianforum@conference.jabber.ru | Клуб кедоводов: kde@conference.jabber.ru

Udachnik

Цитата: McArcher от 05 декабря 2011, 16:27:02
Было бы здорово, если бы следующая стабильная версия Debian вышла не на gnome3, а на xfce!
Эммм... http://cdimage.debian.org/cdimage/release/6.0.3/i386/iso-cd/debian-6.0.3-i386-xfce+lxde-CD-1.iso

McArcher

Цитата: Brainey от 05 декабря 2011, 17:19:56
Открыть содержимое (спойлер)
ЦитироватьБыло бы здорово, если бы следующая стабильная версия Debian вышла не на gnome3, а на xfce!
Было бы здорово, если бы все наконец-то поняли, что в Debian нет "рабочего стола по умолчанию" как в некоторых коричнево-черно-фиолетовых дистрибутивах.
[свернуть]
хм... т.е. то, что wheezy не установил никакой графической оболочки тогда, это не баг, а фича? т.е. просто надо было установить xfce?
но в sqeeze же вроде gnome по умолчанию ставился? или там можно было выбрать xfce?
я ещё не настолько хорошо это знаю как вы.

Udachnik

Цитата: McArcher от 05 декабря 2011, 21:20:48
или там можно было выбрать xfce?
Нужно просто скачать соответствующий образ.
i386 - http://cdimage.debian.org/cdimage/weekly-builds/i386/iso-cd/debian-testing-i386-xfce+lxde-CD-1.iso
AMD64 - http://cdimage.debian.org/cdimage/weekly-builds/amd64/iso-cd/debian-testing-amd64-xfce+lxde-CD-1.iso

Хотя да, с поиском нужных образов на http://cdimage.debian.org/cdimage/ не самая лучшая ситуация.

vladimir_ar

Используя netinstall можно выбрать все. Или ничего (базовый пакет) - это уж по желанию. И у меня wheezy с netinstall DHCP (с роутера) поднимал всегда - матерился на прошивку сетевой и предлагал на внешнем носителе дать ему соответствующее firmware - но поднимался и без него.
Debian Testing, kernel 3.16-2-amd64, OpenBox
AMD A8-3750 / 16Gb RAM / ATI HD6550D (onboard) / Sound ASUS Xonar - DS
_______________________________
Debian Testing, kernel 3.14-2-amd64, OpenBox
HP-655 AMD E1 / 8Gb RAM / ATI HD7310M

chaldon

#12
Сегодня установил Wheeze.
Наверное, погорячился. Опять тот же Gnome3...
Графическая установка не работала (мышь и клава не реагируют), ставил в текстовом режиме. Благо, не забыл, как это делается.
DHCP через маршрутизатор подхватился на лету.
Буду ставить Debian 6. Сейчас скачиваю.
ЗЫ: не посмотрел, может в репах Wheeze есть и Gnome 2? Сейчас сижу в убунте, проверить не могу...

Сообщение объединено: 17 декабря 2011, 15:56:44

Установил Debian 6. Grub как обычно установил в MBR.
После перезагрузки появляется сообщение "не могу найти диск бла бла бла..." и приглашение "grub recowery"
При этом в Live CD все диски монтируются и читаются нормально. Аппаратная проблема?

dimsat1

Debian Wheezy. Опишу небольшую проблемку, установил Центр приложений(software-center), при запуске которого вот такая картина:

Подскажите, это у всех покуда так или только у меня?  ???
debian(jessie) ...DE_Mate... LINUX - FOREVER!
Sams Smart IPTV nStreamLmod_v.3.х

Valeron

#14
Цитата: dimsat1 от 28 декабря 2011, 13:42:27
Подскажите, это у всех покуда так или только у меня?  ???
Упс! У меня software-center раньше нормально запускался, точно помню! А теперь такая же батва, как на Вашем скрине! Да еще при попытке запустить начинает проц грузить. Видимо, после какого-нибудь очередного обновления отвалилось... ???  Ну и пес с ним, все равно я им не пользуюсь никогда! :)

ЗЫ: К тому же, осторожнее надо быть с этим software-center... :)
Enter нажат, к чему теперь рыданья...