[Решено] Модули ядра не найдены при установке системы

[almukantarat]

Загрузился в установленный ранее Debian через меню UEFI. Далее

Код Выделить Развернуть

sudo update-grubполёт нормальный, Windows обнвружен, меню сформировано, всё работает.

При попытке чистой установки системы с любого варианта носителя и разных флешек история с ненайденными модулями повторяется.

Смотрю, что и так: [    0.000000] secureboot: Secure boot disabled

dmesg

Открыть содержимое (спойлер)

[    0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[    0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64 root=UUID=5d61ad7a-0b5b-4b3d-a749-7beb4c5b4b3f ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb8f3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb8f4000-0x00000000bb8fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb8fb000-0x00000000bbd3efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbd3f000-0x00000000bc2cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc2d0000-0x00000000cddacfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cddad000-0x00000000cde42fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cde43000-0x00000000cde92fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cde93000-0x00000000cdfc7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cdfc8000-0x00000000cef80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cef81000-0x00000000ceffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000cefff000-0x00000000ceffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000062effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi: ESRT=0xcef7f998 ACPI=0xcdf97000 ACPI 2.0=0xcdf97000 SMBIOS=0xf04d0 MOKvar=0xce879000
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: MSI MS-7816/Z87-G43 (MS-7816), BIOS V1.11 05/09/2015
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3400.019 MHz processor
[    0.000671] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000673] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000681] last_pfn = 0x62f000 max_arch_pfn = 0x400000000
[    0.000774] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.001205] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.001210] last_pfn = 0xcf000 max_arch_pfn = 0x400000000
[    0.007816] found SMP MP-table at [mem 0x000fd850-0x000fd85f]
[    0.007826] esrt: Reserving ESRT space from 0x00000000cef7f998 to 0x00000000cef7f9d0.
[    0.007891] Using GB pages for direct mapping
[    0.008668] RAMDISK: [mem 0x30bb9000-0x345d3fff]
[    0.008671] ACPI: Early table checksum verification disabled
[    0.008674] ACPI: RSDP 0x00000000CDF97000 000024 (v02 ALASKA)
[    0.008677] ACPI: XSDT 0x00000000CDF97080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008681] ACPI: FACP 0x00000000CDFA61C0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.008685] ACPI: DSDT 0x00000000CDF97190 00F02C (v02 ALASKA A M I    00000036 INTL 20120711)
[    0.008688] ACPI: FACS 0x00000000CDFC7F80 000040
[    0.008690] ACPI: APIC 0x00000000CDFA62D0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.008692] ACPI: FPDT 0x00000000CDFA6348 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008695] ACPI: ASF! 0x00000000CDFA6390 0000A5 (v32 INTEL  HCG    00000001 TFSM 000F4240)
[    0.008697] ACPI: SSDT 0x00000000CDFA6438 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.008699] ACPI: SSDT 0x00000000CDFA6978 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.008702] ACPI: MCFG 0x00000000CDFA7450 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.008704] ACPI: HPET 0x00000000CDFA7490 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.008706] ACPI: SSDT 0x00000000CDFA74C8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.008709] ACPI: SSDT 0x00000000CDFA7838 003528 (v01 SaSsdt SaSsdt  00003000 INTL 20091112)
[    0.008711] ACPI: SSDT 0x00000000CDFAAD60 000A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[    0.008713] ACPI: Reserving FACP table memory at [mem 0xcdfa61c0-0xcdfa62cb]
[    0.008714] ACPI: Reserving DSDT table memory at [mem 0xcdf97190-0xcdfa61bb]
[    0.008715] ACPI: Reserving FACS table memory at [mem 0xcdfc7f80-0xcdfc7fbf]
[    0.008716] ACPI: Reserving APIC table memory at [mem 0xcdfa62d0-0xcdfa6341]
[    0.008717] ACPI: Reserving FPDT table memory at [mem 0xcdfa6348-0xcdfa638b]
[    0.008718] ACPI: Reserving ASF! table memory at [mem 0xcdfa6390-0xcdfa6434]
[    0.008719] ACPI: Reserving SSDT table memory at [mem 0xcdfa6438-0xcdfa6970]
[    0.008720] ACPI: Reserving SSDT table memory at [mem 0xcdfa6978-0xcdfa744f]
[    0.008721] ACPI: Reserving MCFG table memory at [mem 0xcdfa7450-0xcdfa748b]
[    0.008723] ACPI: Reserving HPET table memory at [mem 0xcdfa7490-0xcdfa74c7]
[    0.008724] ACPI: Reserving SSDT table memory at [mem 0xcdfa74c8-0xcdfa7834]
[    0.008725] ACPI: Reserving SSDT table memory at [mem 0xcdfa7838-0xcdfaad5f]
[    0.008726] ACPI: Reserving SSDT table memory at [mem 0xcdfaad60-0xcdfab785]
[    0.008772] No NUMA configuration found
[    0.008772] Faking a node at [mem 0x0000000000000000-0x000000062effffff]
[    0.008783] NODE_DATA(0) allocated [mem 0x62efd5000-0x62effffff]
[    0.008986] Zone ranges:
[    0.008987]  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008989]  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008990]  Normal  [mem 0x0000000100000000-0x000000062effffff]
[    0.008991]  Device  empty
[    0.008992] Movable zone start for each node
[    0.008994] Early memory node ranges
[    0.008994]  node  0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.008996]  node  0: [mem 0x0000000000059000-0x000000000009efff]
[    0.008996]  node  0: [mem 0x0000000000100000-0x00000000bb8f3fff]
[    0.008997]  node  0: [mem 0x00000000bb8fb000-0x00000000bbd3efff]
[    0.008998]  node  0: [mem 0x00000000bc2d0000-0x00000000cddacfff]
[    0.008999]  node  0: [mem 0x00000000cde43000-0x00000000cde92fff]
[    0.008999]  node  0: [mem 0x00000000cefff000-0x00000000ceffffff]
[    0.009000]  node  0: [mem 0x0000000100000000-0x000000062effffff]
[    0.009002] Initmem setup node 0 [mem 0x0000000000001000-0x000000062effffff]
[    0.009006] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009008] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009036] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.014873] On node 0, zone DMA32: 7 pages in unavailable ranges
[    0.015442] On node 0, zone DMA32: 1425 pages in unavailable ranges
[    0.015446] On node 0, zone DMA32: 150 pages in unavailable ranges
[    0.015488] On node 0, zone DMA32: 4460 pages in unavailable ranges
[    0.015792] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.015830] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.015933] ACPI: PM-Timer IO Port: 0x1808
[    0.015939] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.015948] IOAPIC

• : apic_id 8, version 32, address 0xfec00000, GSI 0-23

[    0.015950] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.015952] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.015955] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.015956] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.015959] TSC deadline timer available
[    0.015960] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.015987] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.015989] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.015991] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.015992] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.015994] PM: hibernation: Registered nosave memory: [mem 0xbb8f4000-0xbb8fafff]
[    0.015995] PM: hibernation: Registered nosave memory: [mem 0xbbd3f000-0xbc2cffff]
[    0.015997] PM: hibernation: Registered nosave memory: [mem 0xcddad000-0xcde42fff]
[    0.015999] PM: hibernation: Registered nosave memory: [mem 0xcde93000-0xcdfc7fff]
[    0.016000] PM: hibernation: Registered nosave memory: [mem 0xcdfc8000-0xcef80fff]
[    0.016000] PM: hibernation: Registered nosave memory: [mem 0xcef81000-0xceffefff]
[    0.016002] PM: hibernation: Registered nosave memory: [mem 0xcf000000-0xf7ffffff]
[    0.016003] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.016003] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.016004] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.016004] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.016005] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.016005] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.016006] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.016006] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.016007] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.016008] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.016008] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.016010] [mem 0xcf000000-0xf7ffffff] available for PCI devices
[    0.016012] Booting paravirtualized kernel on bare hardware
[    0.016014] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.019674] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.019852] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[    0.019859] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[    0.019861] pcpu-alloc:

• 0 1 2 3

[    0.019891] Fallback order for Node 0: 0
[    0.019893] Built 1 zonelists, mobility grouping on.  Total pages: 6178884
[    0.019894] Policy zone: Normal
[    0.019895] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64 root=UUID=5d61ad7a-0b5b-4b3d-a749-7beb4c5b4b3f ro quiet
[    0.019932] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64", will be passed to user space.
[    0.019945] random: crng init done
[    0.021548] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.022346] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.022385] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.022389] software IO TLB: area num 4.
[    0.048224] Memory: 3145356K/25108492K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 850064K reserved, 0K cma-reserved)
[    0.048332] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.048343] Kernel/User page tables isolation: enabled
[    0.048370] ftrace: allocating 40246 entries in 158 pages
[    0.054183] ftrace: allocated 158 pages with 5 groups
[    0.054752] Dynamic Preempt: voluntary
[    0.054775] rcu: Preemptible hierarchical RCU implementation.
[    0.054775] rcu:    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.054776]    Trampoline variant of Tasks RCU enabled.
[    0.054777]    Rude variant of Tasks RCU enabled.
[    0.054777]    Tracing variant of Tasks RCU enabled.
[    0.054778] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.054778] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.058273] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.058441] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.058502] Console: colour dummy device 80x25
[    0.058517] printk: console [tty0] enabled
[    0.058529] ACPI: Core revision 20220331
[    0.058610] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.058623] APIC: Switch to symmetric I/O mode setup
[    0.058950] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.078622] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x310260582f4, max_idle_ns: 440795252763 ns
[    0.078626] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.03 BogoMIPS (lpj=13600076)
[    0.078646] CPU0: Thermal monitoring enabled (TM1)
[    0.078670] process: using mwait in idle threads
[    0.078672] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.078673] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.078676] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.078677] Spectre V2 : Mitigation: Retpolines
[    0.078678] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.078678] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.078679] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.078680] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.078681] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.078683] MDS: Mitigation: Clear CPU buffers
[    0.078683] MMIO Stale Data: Unknown: No mitigations
[    0.078684] SRBDS: Mitigation: Microcode
[    0.078688] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.078689] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.078690] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.078691] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.078692] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.089333] Freeing SMP alternatives memory: 36K
[    0.089336] pid_max: default: 32768 minimum: 301
[    0.094642] LSM: Security Framework initializing
[    0.094653] landlock: Up and running.
[    0.094654] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.094671] AppArmor: AppArmor initialized
[    0.094672] TOMOYO Linux initialized
[    0.094677] LSM support for eBPF active
[    0.094716] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.094745] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.098678] smpboot: CPU0: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.098761] cblist_init_generic: Setting adjustable number of callback queues.
[    0.098762] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.098773] cblist_init_generic: Setting adjustable number of callback queues.
[    0.098774] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.098783] cblist_init_generic: Setting adjustable number of callback queues.
[    0.098784] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.098792] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.098824] ... version:                3
[    0.098825] ... bit width:              48
[    0.098825] ... generic registers:      8
[    0.098826] ... value mask:            0000ffffffffffff
[    0.098826] ... max period:            00007fffffffffff
[    0.098827] ... fixed-purpose events:  3
[    0.098828] ... event mask:            00000007000000ff
[    0.098929] signal: max sigframe size: 1776
[    0.098940] Estimated ratio of average max frequency by base frequency (times 1024): 1144
[    0.098955] rcu: Hierarchical SRCU implementation.
[    0.098955] rcu:    Max phase no-delay instances is 1000.
[    0.099345] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.099387] smp: Bringing up secondary CPUs ...
[    0.099447] x86: Booting SMP configuration:
[    0.099448] .... node  #0, CPUs:      #1 #2 #3
[    0.104068] smp: Brought up 1 node, 4 CPUs
[    0.104068] smpboot: Max logical packages: 1
[    0.104068] smpboot: Total of 4 processors activated (27200.15 BogoMIPS)
[    0.141848] node 0 deferred pages initialised in 40ms
[    0.144948] devtmpfs: initialized
[    0.144948] x86/mm: Memory block size: 128MB
[    0.147204] ACPI: PM: Registering ACPI NVS region [mem 0xbb8f4000-0xbb8fafff] (28672 bytes)
[    0.147204] ACPI: PM: Registering ACPI NVS region [mem 0xcde93000-0xcdfc7fff] (1265664 bytes)
[    0.147204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.147204] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.147204] pinctrl core: initialized pinctrl subsystem
[    0.147204] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.147399] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.147624] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.147850] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.147863] audit: initializing netlink subsys (disabled)
[    0.147876] audit: type=2000 audit(1725611627.088:1): state=initialized audit_enabled=0 res=1
[    0.147876] thermal_sys: Registered thermal governor 'fair_share'
[    0.147876] thermal_sys: Registered thermal governor 'bang_bang'
[    0.147876] thermal_sys: Registered thermal governor 'step_wise'
[    0.147876] thermal_sys: Registered thermal governor 'user_space'
[    0.147876] thermal_sys: Registered thermal governor 'power_allocator'
[    0.147876] cpuidle: using governor ladder
[    0.147876] cpuidle: using governor menu
[    0.147876] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.147876] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.147876] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.147876] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.147876] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.147876] PCI: Using configuration type 1 for base access
[    0.147876] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.147876] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.147876] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.147876] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.147876] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.147876] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.147876] ACPI: Added _OSI(Module Device)
[    0.147876] ACPI: Added _OSI(Processor Device)
[    0.147876] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.147876] ACPI: Added _OSI(Processor Aggregator Device)
[    0.156077] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.156729] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.157317] ACPI: Dynamic OEM Table Load:
[    0.157322] ACPI: SSDT 0xFFFF938540A70C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.157765] ACPI: Dynamic OEM Table Load:
[    0.157769] ACPI: SSDT 0xFFFF938540973800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.158233] ACPI: Dynamic OEM Table Load:
[    0.158236] ACPI: SSDT 0xFFFF938540AB0800 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.159115] ACPI: Interpreter enabled
[    0.159135] ACPI: PM: (supports S0 S3 S4 S5)
[    0.159136] ACPI: Using IOAPIC for interrupt routing
[    0.159154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.159155] PCI: Using E820 reservations for host bridge windows
[    0.159350] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.165791] ACPI: PM: Power Resource [FN00]
[    0.165834] ACPI: PM: Power Resource [FN01]
[    0.165874] ACPI: PM: Power Resource [FN02]
[    0.165912] ACPI: PM: Power Resource [FN03]
[    0.165952] ACPI: PM: Power Resource [FN04]
[    0.166392] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.166397] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.166499] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.166583] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.166584] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.166952] PCI host bridge to bus 0000:00
[    0.166953] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.166955] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.166956] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.166958] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.166959] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
[    0.166960] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.166972] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.167025] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.167055] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.167247] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.167261] pci 0000:00:14.0: reg 0x10: [mem 0xf4200000-0xf420ffff 64bit]
[    0.167312] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.167388] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.167403] pci 0000:00:16.0: reg 0x10: [mem 0xf421a000-0xf421a00f 64bit]
[    0.167455] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.167504] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.167518] pci 0000:00:1a.0: reg 0x10: [mem 0xf4218000-0xf42183ff]
[    0.167589] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.167649] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.167662] pci 0000:00:1b.0: reg 0x10: [mem 0xf4210000-0xf4213fff 64bit]
[    0.167715] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.167775] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.167840] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.168002] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[    0.168067] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.168232] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[    0.168296] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.168459] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[    0.168522] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.168692] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.168706] pci 0000:00:1d.0: reg 0x10: [mem 0xf4217000-0xf42173ff]
[    0.168778] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.168845] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[    0.168996] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.169007] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.169013] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.169019] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.169025] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.169031] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.169037] pci 0000:00:1f.2: reg 0x24: [mem 0xf4216000-0xf42167ff]
[    0.169066] pci 0000:00:1f.2: PME# supported from D3hot
[    0.169121] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.169135] pci 0000:00:1f.3: reg 0x10: [mem 0xf4215000-0xf42150ff 64bit]
[    0.169152] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.169230] pci 0000:01:00.0: [10de:1f0a] type 00 class 0x030000
[    0.169241] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
[    0.169249] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.169258] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.169264] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.169269] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
[    0.169283] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.169287] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.169319] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.169365] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.169449] pci 0000:01:00.1: [10de:10f9] type 00 class 0x040300
[    0.169459] pci 0000:01:00.1: reg 0x10: [mem 0xf6080000-0xf6083fff]
[    0.169573] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.169575] pci 0000:00:01.0:  bridge window [io  0xe000-0xefff]
[    0.169577] pci 0000:00:01.0:  bridge window [mem 0xf5000000-0xf60fffff]
[    0.169579] pci 0000:00:01.0:  bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[    0.169623] acpiphp: Slot [1] registered
[    0.169627] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.169689] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.169708] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.169734] pci 0000:03:00.0: reg 0x18: [mem 0xe2104000-0xe2104fff 64bit pref]
[    0.169751] pci 0000:03:00.0: reg 0x20: [mem 0xe2100000-0xe2103fff 64bit pref]
[    0.169843] pci 0000:03:00.0: supports D1 D2
[    0.169844] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.169980] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.169983] pci 0000:00:1c.1:  bridge window [io  0xd000-0xdfff]
[    0.169988] pci 0000:00:1c.1:  bridge window [mem 0xe2100000-0xe21fffff 64bit pref]
[    0.170047] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400
[    0.170185] pci 0000:04:00.0: supports D1 D2
[    0.170186] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.178635] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[    0.178639] pci 0000:00:1c.3:  bridge window [io  0xc000-0xcfff]
[    0.178642] pci 0000:00:1c.3:  bridge window [mem 0xf0000000-0xf41fffff]
[    0.178647] pci 0000:00:1c.3:  bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.178648] pci 0000:00:1c.3:  bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.178649] pci 0000:00:1c.3:  bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.178650] pci 0000:00:1c.3:  bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.178651] pci 0000:00:1c.3:  bridge window [mem 0xd0000000-0xfeafffff window] (subtractive decode)
[    0.178699] pci_bus 0000:05: extended config space not accessible
[    0.178724] pci 0000:05:01.0: [1102:0005] type 00 class 0x040100
[    0.178746] pci 0000:05:01.0: reg 0x10: [io  0xc000-0xc01f]
[    0.178763] pci 0000:05:01.0: reg 0x14: [mem 0xf4000000-0xf41fffff 64bit]
[    0.178781] pci 0000:05:01.0: reg 0x1c: [mem 0xf0000000-0xf3ffffff 64bit]
[    0.178853] pci 0000:05:01.0: supports D1 D2
[    0.178943] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.178951] pci 0000:04:00.0:  bridge window [io  0xc000-0xcfff]
[    0.178955] pci 0000:04:00.0:  bridge window [mem 0xf0000000-0xf41fffff]
[    0.179032] pci 0000:06:00.0: [104c:823e] type 01 class 0x060400
[    0.179063] pci 0000:06:00.0: reg 0x14: [mem 0xf6300000-0xf6300fff]
[    0.179166] pci 0000:06:00.0: supports D1 D2
[    0.179267] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[    0.179271] pci 0000:00:1c.4:  bridge window [mem 0xf6200000-0xf63fffff]
[    0.179321] pci_bus 0000:07: extended config space not accessible
[    0.179341] pci 0000:07:00.0: [104c:823f] type 00 class 0x0c0010
[    0.179362] pci 0000:07:00.0: reg 0x10: [mem 0xf6204000-0xf62047ff]
[    0.179372] pci 0000:07:00.0: reg 0x14: [mem 0xf6200000-0xf6203fff]
[    0.179457] pci 0000:07:00.0: supports D1 D2
[    0.179458] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
[    0.179546] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.179556] pci 0000:06:00.0:  bridge window [mem 0xf6200000-0xf62fffff]
[    0.180136] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.180167] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.180196] ACPI: PCI: Interrupt link LNKC configured for IRQ 3
[    0.180225] ACPI: PCI: Interrupt link LNKD configured for IRQ 3
[    0.180252] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.180253] ACPI: PCI: Interrupt link LNKE disabled
[    0.180280] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.180280] ACPI: PCI: Interrupt link LNKF disabled
[    0.180308] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.180336] ACPI: PCI: Interrupt link LNKH configured for IRQ 10
[    0.180642] iommu: Default domain type: Translated
[    0.180642] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.180642] pps_core: LinuxPPS API ver. 1 registered
[    0.180642] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.180642] PTP clock support registered
[    0.180642] EDAC MC: Ver: 3.0.0
[    0.180642] Registered efivars operations
[    0.180642] NetLabel: Initializing
[    0.180642] NetLabel:  domain hash size = 128
[    0.180642] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.180642] NetLabel:  unlabeled traffic allowed by default
[    0.180642] PCI: Using ACPI for IRQ routing
[    0.180642] PCI: pci_cache_line_size set to 64 bytes
[    0.180642] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.180642] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.180642] e820: reserve RAM buffer [mem 0xbb8f4000-0xbbffffff]
[    0.180642] e820: reserve RAM buffer [mem 0xbbd3f000-0xbbffffff]
[    0.180642] e820: reserve RAM buffer [mem 0xcddad000-0xcfffffff]
[    0.180642] e820: reserve RAM buffer [mem 0xcde93000-0xcfffffff]
[    0.180642] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
[    0.180642] e820: reserve RAM buffer [mem 0x62f000000-0x62fffffff]
[    0.180642] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.180642] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.180642] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.180642] vgaarb: loaded
[    0.180642] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.180642] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.182627] clocksource: Switched to clocksource tsc-early
[    0.182632] VFS: Disk quotas dquot_6.6.0
[    0.182632] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.182632] AppArmor: AppArmor Filesystem Enabled
[    0.182632] pnp: PnP ACPI init
[    0.182632] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.182632] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.182632] system 00:01: [io  0xffff] has been reserved
[    0.182632] system 00:01: [io  0xffff] has been reserved
[    0.182632] system 00:01: [io  0xffff] has been reserved
[    0.182632] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.182632] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.182632] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.182632] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.182632] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.182632] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.182632] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.183217] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.183219] system 00:04: [io  0x0a10-0x0a1f] has been reserved
[    0.183323] pnp 00:05: [dma 0 disabled]
[    0.183502] pnp 00:06: [dma 0 disabled]
[    0.183588] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.183860] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.183863] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.183864] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.183865] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.183867] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.183868] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.183870] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.183871] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.183873] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.183874] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.183875] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.183877] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.184014] pnp: PnP ACPI: found 9 devices
[    0.189344] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.189400] NET: Registered PF_INET protocol family
[    0.189531] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.192064] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.192097] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.192214] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.192483] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.192690] TCP: Hash tables configured (established 262144 bind 65536)
[    0.192776] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.192886] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.192950] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.193016] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.193023] NET: Registered PF_XDP protocol family
[    0.193030] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.193034] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.193036] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.193045] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe2200000-0xe23fffff]
[    0.193049] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe2400000-0xe25fffff 64bit pref]
[    0.193051] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.193054] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.193056] pci 0000:00:01.0:  bridge window [io  0xe000-0xefff]
[    0.193059] pci 0000:00:01.0:  bridge window [mem 0xf5000000-0xf60fffff]
[    0.193060] pci 0000:00:01.0:  bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[    0.193063] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.193065] pci 0000:00:1c.0:  bridge window [io  0x2000-0x2fff]
[    0.193068] pci 0000:00:1c.0:  bridge window [mem 0xe2200000-0xe23fffff]
[    0.193071] pci 0000:00:1c.0:  bridge window [mem 0xe2400000-0xe25fffff 64bit pref]
[    0.193076] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.193078] pci 0000:00:1c.1:  bridge window [io  0xd000-0xdfff]
[    0.193083] pci 0000:00:1c.1:  bridge window [mem 0xe2100000-0xe21fffff 64bit pref]
[    0.193088] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.193091] pci 0000:04:00.0:  bridge window [io  0xc000-0xcfff]
[    0.193097] pci 0000:04:00.0:  bridge window [mem 0xf0000000-0xf41fffff]
[    0.193107] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[    0.193110] pci 0000:00:1c.3:  bridge window [io  0xc000-0xcfff]

[свернуть]

[almukantarat]

dmesg, продолжение

Открыть содержимое (спойлер)

[    0.193113] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf41fffff]
[    0.193119] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.193125] pci 0000:06:00.0:   bridge window [mem 0xf6200000-0xf62fffff]
[    0.193137] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[    0.193140] pci 0000:00:1c.4:   bridge window [mem 0xf6200000-0xf63fffff]
[    0.193147] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.193148] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.193149] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.193150] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.193151] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfeafffff window]
[    0.193153] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.193154] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
[    0.193155] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[    0.193156] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.193157] pci_bus 0000:02: resource 1 [mem 0xe2200000-0xe23fffff]
[    0.193158] pci_bus 0000:02: resource 2 [mem 0xe2400000-0xe25fffff 64bit pref]
[    0.193159] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.193160] pci_bus 0000:03: resource 2 [mem 0xe2100000-0xe21fffff 64bit pref]
[    0.193161] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.193162] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf41fffff]
[    0.193163] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.193164] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.193165] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.193166] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.193167] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfeafffff window]
[    0.193168] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.193169] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf41fffff]
[    0.193171] pci_bus 0000:06: resource 1 [mem 0xf6200000-0xf63fffff]
[    0.193172] pci_bus 0000:07: resource 1 [mem 0xf6200000-0xf62fffff]
[    0.193587] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.193608] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.193619] pci 0000:04:00.0: Disabling ASPM L0s/L1
[    0.193620] pci 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.193632] PCI: CLS 64 bytes, default 64
[    0.193670] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.193671] software IO TLB: mapped [mem 0x00000000b78f4000-0x00000000bb8f4000] (64MB)
[    0.193715] Trying to unpack rootfs image as initramfs...
[    0.193947] Initialise system trusted keyrings
[    0.193956] Key type blacklist registered
[    0.193991] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    0.194926] zbud: loaded
[    0.195105] integrity: Platform Keyring initialized
[    0.195109] integrity: Machine keyring initialized
[    0.195111] Key type asymmetric registered
[    0.195112] Asymmetric key parser 'x509' registered
[    0.478302] Freeing initrd memory: 59500K
[    0.481918] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.481938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.481959] io scheduler mq-deadline registered
[    0.483138] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.483596] thermal LNXTHERM:00: registered as thermal_zone0
[    0.483598] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.483730] thermal LNXTHERM:01: registered as thermal_zone1
[    0.483731] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[    0.483834] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.483964] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.484634] Linux agpgart interface v0.103
[    0.484688] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.484897] i8042: PNP: No PS/2 controller found.
[    0.484947] mousedev: PS/2 mouse device common for all mice
[    0.484959] rtc_cmos 00:02: RTC can wake from S4
[    0.485172] rtc_cmos 00:02: registered as rtc0
[    0.485202] rtc_cmos 00:02: setting system clock to 2024-09-06T08:33:47 UTC (1725611627)
[    0.485221] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[    0.485324] intel_pstate: Intel P-state driver initializing
[    0.485573] ledtrig-cpu: registered to indicate activity on CPUs
[    0.485737] efifb: probing for efifb
[    0.485761] efifb: framebuffer at 0xe1000000, using 2432k, total 2432k
[    0.485762] efifb: mode is 800x600x32, linelength=4096, pages=1
[    0.485763] efifb: scrolling: redraw
[    0.485763] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.485836] Console: switching to colour frame buffer device 100x37
[    0.486476] fb0: EFI VGA frame buffer device
[    0.494047] NET: Registered PF_INET6 protocol family
[    0.497642] Segment Routing with IPv6
[    0.497660] In-situ OAM (IOAM) with IPv6
[    0.497674] mip6: Mobile IPv6
[    0.497676] NET: Registered PF_PACKET protocol family
[    0.497792] mpls_gso: MPLS GSO support
[    0.498155] microcode: sig=0x306c3, pf=0x2, revision=0x28
[    0.498187] microcode: Microcode Update Driver: v2.2.
[    0.498192] IPI shorthand broadcast: enabled
[    0.498210] sched_clock: Marking stable (497919932, 155037)->(507071853, -8996884)
[    0.498348] registered taskstats version 1
[    0.498354] Loading compiled-in X.509 certificates
[    0.511990] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    0.512001] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[    0.512277] zswap: loaded using pool lzo/zbud
[    0.512504] Key type .fscrypt registered
[    0.512505] Key type fscrypt-provisioning registered
[    0.515314] Key type encrypted registered
[    0.515317] AppArmor: AppArmor sha1 policy hashing enabled
[    0.515950] ima: No TPM chip found, activating TPM-bypass!
[    0.515953] ima: Allocated hash algorithm: sha256
[    0.515960] ima: No architecture policies found
[    0.515970] evm: Initialising EVM extended attributes:
[    0.515970] evm: security.selinux
[    0.515971] evm: security.SMACK64 (disabled)
[    0.515971] evm: security.SMACK64EXEC (disabled)
[    0.515972] evm: security.SMACK64TRANSMUTE (disabled)
[    0.515972] evm: security.SMACK64MMAP (disabled)
[    0.515973] evm: security.apparmor
[    0.515973] evm: security.ima
[    0.515974] evm: security.capability
[    0.515974] evm: HMAC attrs: 0x1
[    0.587847] clk: Disabling unused clocks
[    0.588468] Freeing unused decrypted memory: 2036K
[    0.588747] Freeing unused kernel image (initmem) memory: 2796K
[    0.588781] Write protecting the kernel read-only data: 26624k
[    0.589125] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    0.589281] Freeing unused kernel image (rodata/data gap) memory: 1168K
[    0.623479] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.623480] x86/mm: Checking user space page tables
[    0.655868] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.655872] Run /init as init process
[    0.655873]   with arguments:
[    0.655874]     /init
[    0.655875]   with environment:
[    0.655875]     HOME=/
[    0.655876]     TERM=linux
[    0.655876]     BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64
[    0.723698] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.739736] ACPI: button: Power Button [PWRB]
[    0.740024] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.744349] SCSI subsystem initialized
[    0.744434] ACPI: button: Power Button [PWRF]
[    0.745861] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20220331/utaddress-204)
[    0.745865] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    0.745868] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204)
[    0.745870] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    0.745871] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204)
[    0.745873] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204)
[    0.745874] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    0.745875] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204)
[    0.745877] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204)
[    0.745878] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    0.745879] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.745968] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    0.745992] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.746237] i2c i2c-0: 4/4 memory slots populated (from DMI)
[    0.747049] i2c i2c-0: Successfully instantiated SPD at 0x50
[    0.747336] i2c i2c-0: Successfully instantiated SPD at 0x51
[    0.749824] i2c i2c-0: Successfully instantiated SPD at 0x52
[    0.750117] i2c i2c-0: Successfully instantiated SPD at 0x53
[    0.756579] ACPI: bus type USB registered
[    0.764987] libata version 3.00 loaded.
[    0.766768] usbcore: registered new interface driver usbfs
[    0.766782] usbcore: registered new interface driver hub
[    0.766791] usbcore: registered new device driver usb
[    0.768188] ahci 0000:00:1f.2: version 3.0
[    0.768351] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[    0.768354] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[    0.772422] firewire_ohci 0000:07:00.0: enabling device (0000 -> 0002)
[    0.774261] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.784581] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.784587] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.784596] ehci-pci 0000:00:1a.0: debug port 2
[    0.787504] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, d4:3d:7e:ef:32:38, XID 2c9, IRQ 30
[    0.787508] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    0.788514] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf4218000
[    0.804193] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.804226] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.804227] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.804228] usb usb1: Product: EHCI Host Controller
[    0.804230] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd
[    0.804230] usb usb1: SerialNumber: 0000:00:1a.0
[    0.804264] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    0.804348] hub 1-0:1.0: USB hub found
[    0.804353] hub 1-0:1.0: 2 ports detected
[    0.804469] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.804475] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.805520] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.805640] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.805644] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.805647] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.805649] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.805651] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.805654] ehci-pci 0000:00:1d.0: debug port 2
[    0.805673] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.805675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.805676] usb usb2: Product: xHCI Host Controller
[    0.805677] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
[    0.805677] usb usb2: SerialNumber: 0000:00:14.0
[    0.805797] hub 2-0:1.0: USB hub found
[    0.805819] hub 2-0:1.0: 14 ports detected
[    0.807762] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    0.807765] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.807766] usb usb4: Product: xHCI Host Controller
[    0.807767] usb usb4: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
[    0.807767] usb usb4: SerialNumber: 0000:00:14.0
[    0.807850] hub 4-0:1.0: USB hub found
[    0.807863] hub 4-0:1.0: 6 ports detected
[    0.809572] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf4217000
[    0.824195] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.824220] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.824222] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824223] usb usb3: Product: EHCI Host Controller
[    0.824223] usb usb3: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd
[    0.824224] usb usb3: SerialNumber: 0000:00:1d.0
[    0.824458] hub 3-0:1.0: USB hub found
[    0.824462] hub 3-0:1.0: 2 ports detected
[    0.824562] scsi host0: ahci
[    0.825315] scsi host1: ahci
[    0.825630] scsi host2: ahci
[    0.826130] scsi host3: ahci
[    0.826319] scsi host4: ahci
[    0.826395] scsi host5: ahci
[    0.826423] ata1: SATA max UDMA/133 abar m2048@0xf4216000 port 0xf4216100 irq 29
[    0.826425] ata2: SATA max UDMA/133 abar m2048@0xf4216000 port 0xf4216180 irq 29
[    0.826427] ata3: SATA max UDMA/133 abar m2048@0xf4216000 port 0xf4216200 irq 29
[    0.826429] ata4: SATA max UDMA/133 abar m2048@0xf4216000 port 0xf4216280 irq 29
[    0.826431] ata5: SATA max UDMA/133 abar m2048@0xf4216000 port 0xf4216300 irq 29
[    0.826431] ata6: DUMMY
[    0.836243] firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x2
[    1.060200] usb 2-3: new low-speed USB device number 2 using xhci_hcd
[    1.068188] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.080200] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.139223] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.139245] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.139266] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.139288] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.139309] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.139940] ata4.00: ATA-8: ST2000DM001-9YN164, CC4B, max UDMA/133
[    1.140089] ata2.00: ATA-11: WDC  WDS250G2B0A-00SM50, 401020WD, max UDMA/133
[    1.140238] ata1.00: ATA-11: SanDisk SSD G5 BICS4, 415000WD, max UDMA/133
[    1.140252] ata3.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
[    1.140615] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.140629] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.141066] ata5.00: ATAPI: Optiarc DVD RW AD-5240S, 1.02, max UDMA/100
[    1.142162] ata1.00: Features: Dev-Sleep
[    1.142187] ata2.00: Features: Dev-Sleep
[    1.143504] ata5.00: configured for UDMA/100
[    1.145673] ata1.00: configured for UDMA/133
[    1.145696] ata2.00: configured for UDMA/133
[    1.146026] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SSD G5 B 00WD PQ: 0 ANSI: 5
[    1.147121] scsi 1:0:0:0: Direct-Access     ATA      WDC  WDS250G2B0A 20WD PQ: 0 ANSI: 5
[    1.160377] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.161716] ata3.00: configured for UDMA/133
[    1.161924] scsi 2:0:0:0: Direct-Access     ATA      ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
[    1.208215] tsc: Refined TSC clocksource calibration: 3399.996 MHz
[    1.208230] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024b3bec5, max_idle_ns: 440795366697 ns
[    1.208272] clocksource: Switched to clocksource tsc
[    1.213557] usb 2-3: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[    1.213568] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.213574] usb 2-3: Product: USB Keyboard
[    1.213578] usb 2-3: Manufacturer: Logitech
[    1.214501] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.215386] ata4.00: configured for UDMA/133
[    1.215654] scsi 3:0:0:0: Direct-Access     ATA      ST2000DM001-9YN1 CC4B PQ: 0 ANSI: 5
[    1.218211] scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-5240S  1.02 PQ: 0 ANSI: 5
[    1.222877] hid: raw HID events driver (C) Jiri Kosina
[    1.232591] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[    1.232605] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.232871] hub 1-1:1.0: USB hub found
[    1.232944] hub 1-1:1.0: 6 ports detected
[    1.236571] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[    1.236574] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.236715] hub 3-1:1.0: USB hub found
[    1.236821] hub 3-1:1.0: 8 ports detected
[    1.280035] sr 4:0:0:0: [sr0] scsi3-mmc drive: 94x/94x writer cd/rw xa/form2 cdda tray
[    1.280039] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.281731] usbcore: registered new interface driver usbhid
[    1.281734] usbhid: USB HID core driver
[    1.283760] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C31C.0001/input/input2
[    1.284958] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.284966] sd 0:0:0:0: [sda] Write Protect is off
[    1.284968] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.284987] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.284994] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.284995] sd 1:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.284996] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    1.284996] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    1.285000] sd 1:0:0:0: [sdc] Write Protect is off
[    1.285002] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.285002] sd 2:0:0:0: [sdb] Write Protect is off
[    1.285003] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.285007] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.285010] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.285014] sd 1:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[    1.285019] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    1.285149] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.285150] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[    1.285154] sd 3:0:0:0: [sdd] Write Protect is off
[    1.285155] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.285167] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.285177] sd 3:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
[    1.286438]  sda: sda1 sda2
[    1.286515] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.286845]  sdc: sdc1 sdc2 sdc3
[    1.286951] sd 1:0:0:0: [sdc] Attached SCSI disk
[    1.289208] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.328629]  sdd: sdd1
[    1.328743] sd 3:0:0:0: [sdd] Attached SCSI disk
[    1.331765]  sdb: sdb1
[    1.331883] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.344164] usb 2-4: new full-speed USB device number 3 using xhci_hcd
[    1.368263] firewire_core 0000:07:00.0: created device fw0: GUID 7856341278563412, S800
[    1.420260] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-3/input0
[    1.420373] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C31C.0002/input/input3
[    1.480222] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C31C.0002/input/input4
[    1.480279] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-3/input1
[    1.497601] usb 2-4: New USB device found, idVendor=046d, idProduct=c093, bcdDevice=53.00
[    1.497604] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.497605] usb 2-4: Product: Advanced Corded Mouse M500s
[    1.497606] usb 2-4: Manufacturer: Logitech
[    1.497606] usb 2-4: SerialNumber: 206931665746
[    1.499135] input: Logitech Advanced Corded Mouse M500s as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:046D:C093.0003/input/input5
[    1.499220] hid-generic 0003:046D:C093.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Advanced Corded Mouse M500s] on usb-0000:00:14.0-4/input0
[    1.500062] input: Logitech Advanced Corded Mouse M500s Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/0003:046D:C093.0004/input/input6
[    1.556308] hid-generic 0003:046D:C093.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech Advanced Corded Mouse M500s] on usb-0000:00:14.0-4/input1
[    1.563447] PM: Image not found (code -22)
[    1.647459] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Quota mode: none.
[    1.684180] usb 2-12: new high-speed USB device number 4 using xhci_hcd
[    1.694577] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    1.801409] systemd[1]: Inserted module 'autofs4'
[    1.827295] systemd[1]: systemd 252.30-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    1.827300] systemd[1]: Detected architecture x86-64.
[    1.828993] systemd[1]: Hostname set to <almukantarat>.
[    1.840929] usb 2-12: New USB device found, idVendor=8564, idProduct=1000, bcdDevice= 1.00
[    1.840932] usb 2-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.840933] usb 2-12: Product: Mass Storage Device
[    1.840934] usb 2-12: Manufacturer: JetFlash
[    1.840935] usb 2-12: SerialNumber: 2576060099
[    1.963676] systemd[1]: Queued start job for default target graphical.target.
[    2.000778] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    2.001000] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    2.001190] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    2.001341] systemd[1]: Created slice user.slice - User and Session Slice.
[    2.001389] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    2.001504] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    2.001520] systemd[1]: Expecting device dev-disk-by\x2duuid-2cdafb17\x2d8944\x2d49fc\x2d8419\x2d86037004da29.device - /dev/disk/by-uuid/2cdafb17-8944-49fc-8419-86037004da29...
[    2.001526] systemd[1]: Expecting device dev-disk-by\x2duuid-347b75cb\x2d6884\x2d4970\x2d9a38\x2d45ca7d196005.device - /dev/disk/by-uuid/347b75cb-6884-4970-9a38-45ca7d196005...
[    2.001531] systemd[1]: Expecting device dev-disk-by\x2duuid-CD20\x2d56A4.device - /dev/disk/by-uuid/CD20-56A4...
[    2.001537] systemd[1]: Expecting device dev-disk-by\x2duuid-b032b37a\x2dd0d0\x2d496a\x2d854a\x2d6b1ab65716c1.device - /dev/disk/by-uuid/b032b37a-d0d0-496a-854a-6b1ab65716c1...
[    2.001554] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    2.001569] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[    2.001579] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[    2.001587] systemd[1]: Reached target slices.target - Slice Units.
[    2.001606] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    2.004125] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[    2.004203] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[    2.004248] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    2.004536] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[    2.004625] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    2.004714] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[    2.004963] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    2.005033] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    2.005608] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    2.006128] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    2.006683] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    2.007199] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    2.008397] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[    2.009023] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    2.009656] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    2.010591] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[    2.011448] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    2.012500] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    2.013167] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    2.013997] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[    2.014082] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    2.015115] systemd[1]: Starting systemd-journald.service - Journal Service...
[    2.021687] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    2.021709] device-mapper: uevent: version 1.0.3
[    2.021769] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    2.022648] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    2.023281] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    2.023915] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    2.024030] pstore: Using crash dump compression: deflate
[    2.025503] loop: module loaded
[    2.025504] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    2.025684] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    2.025836] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    2.026016] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    2.026296] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    2.026632] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    2.026731] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[    2.026931] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    2.027028] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[    2.027221] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    2.027311] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[    2.028062] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[    2.028117] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[    2.028615] pstore: Registered efi as persistent store backend
[    2.029006] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    2.029111] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[    2.029949] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[    2.035855] EXT4-fs (sdc2): re-mounted. Quota mode: none.
[    2.036835] fuse: init (API version 7.37)
[    2.038204] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[    2.038418] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[    2.038450] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    2.039188] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[    2.040043] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[    2.040324] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    2.040444] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[    2.041160] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[    2.042999] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[    2.053785] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[    2.053985] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[    2.053991] ACPI: bus type drm_connector registered
[    2.054751] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    2.054854] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    2.058094] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[    2.058902] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[    2.074786] systemd[1]: Started systemd-journald.service - Journal Service.
[    2.093561] systemd-journald[270]: Received client request to flush runtime journal.
[    2.332744] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.333170] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.333423] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.333813] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    2.334076] sr 4:0:0:0: Attached scsi generic sg4 type 5
[    2.393626] parport_pc 00:06: reported by Plug and Play ACPI
[    2.393682] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    2.457446] usb-storage 2-12:1.0: USB Mass Storage device detected
[    2.512952] at24 0-0050: supply vcc not found, using dummy regulator
[    2.514630] at24 0-0050: 256 byte spd EEPROM, read-only
[    2.514646] at24 0-0051: supply vcc not found, using dummy regulator
[    2.517781] at24 0-0051: 256 byte spd EEPROM, read-only
[    2.517796] at24 0-0052: supply vcc not found, using dummy regulator
[    2.519458] at24 0-0052: 256 byte spd EEPROM, read-only
[    2.519475] at24 0-0053: supply vcc not found, using dummy regulator
[    2.519689] scsi host6: usb-storage 2-12:1.0
[    2.519745] usbcore: registered new interface driver usb-storage
[    2.521229] at24 0-0053: 256 byte spd EEPROM, read-only
[    2.524443] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    2.700831] nvidia: loading out-of-tree module taints kernel.
[    2.700840] nvidia: module license 'NVIDIA' taints kernel.
[    2.700841] Disabling lock debugging due to kernel taint
[    2.707383] iTCO_vendor_support: vendor-support=0
[    2.710664] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    2.712064] usbcore: registered new interface driver uas
[    2.713490] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[    2.716882] snd_ctxfi 0000:05:01.0: chip 20K1 model Unknown (1102:0023) is found
[    2.716982] snd_ctxfi 0000:05:01.0: enabling device (0000 -> 0003)
[    2.731561] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    2.741986] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    2.742214] snd_hda_intel 0000:01:00.1: Disabling MSI
[    2.742218] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.743134] ppdev: user-space parallel port driver
[    2.830679] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    2.830683] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.830685] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.830686] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    2.830687] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    2.830688] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    2.830689] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    2.830690] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    2.839897] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10
[    2.841126] nvidia-nvlink: Nvlink Core is being initialized, major device number 241

[    2.841771] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11
[    2.841817] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12
[    2.841843] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input13
[    2.846440] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    2.853348] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    2.853376] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    2.853400] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    2.853423] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[    2.853446] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[    2.853469] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    2.853491] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    2.853515] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[    2.898319] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  535.183.01  Sun May 12 19:39:15 UTC 2024
[    3.141354] snd_ctxfi 0000:05:01.0: Use xfi-native timer
[    3.158199] Adding 1000444k swap on /dev/sdc3.  Priority:-2 extents:1 across:1000444k SSFS
[    3.332340] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none.
[    3.387896] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    3.387899] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.387900] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.387901] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.392262] cryptd: max_cpu_qlen set to 1000
[    3.407265] AVX2 version of gcm_enc/dec engaged.
[    3.407288] AES CTR mode by8 optimization enabled
[    3.424522] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  535.183.01  Sun May 12 19:31:08 UTC 2024
[    3.447243] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Quota mode: none.
[    3.599882] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 16GB   1.00 PQ: 0 ANSI: 5
[    3.600141] sd 6:0:0:0: Attached scsi generic sg5 type 0
[    3.601472] sd 6:0:0:0: [sde] 30867456 512-byte logical blocks: (15.8 GB/14.7 GiB)
[    3.601588] sd 6:0:0:0: [sde] Write Protect is off
[    3.601591] sd 6:0:0:0: [sde] Mode Sense: 23 00 00 00
[    3.601712] sd 6:0:0:0: [sde] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[    3.608707]  sde: sde1 sde2
[    3.608839] sd 6:0:0:0: [sde] Attached SCSI removable disk
[    3.779698] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    3.779700] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    3.781213] intel_rapl_common: Found RAPL domain package
[    3.781215] intel_rapl_common: Found RAPL domain core
[    3.781216] intel_rapl_common: Found RAPL domain dram
[    3.789056] audit: type=1400 audit(1725611630.799:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=554 comm="apparmor_parser"
[    3.789060] audit: type=1400 audit(1725611630.799:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=554 comm="apparmor_parser"
[    3.789236] audit: type=1400 audit(1725611630.799:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=557 comm="apparmor_parser"
[    3.789239] audit: type=1400 audit(1725611630.799:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=557 comm="apparmor_parser"
[    3.789240] audit: type=1400 audit(1725611630.799:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=557 comm="apparmor_parser"
[    3.789366] audit: type=1400 audit(1725611630.799:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=553 comm="apparmor_parser"
[    3.793330] audit: type=1400 audit(1725611630.803:: apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=563 comm="apparmor_parser"
[    3.795041] audit: type=1400 audit(1725611630.803:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=561 comm="apparmor_parser"
[    3.797131] audit: type=1400 audit(1725611630.807:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=556 comm="apparmor_parser"
[    3.960283] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[    3.960677] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[    4.186491] r8169 0000:03:00.0 enp3s0: Link is Down
[    4.642116] NET: Registered PF_QIPCRTR protocol family
[    6.452968] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[    6.453049] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[   33.920198] systemd-journald[270]: Time jumped backwards, rotating.

[свернуть]

[Лия]

[    0.787504] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, d4:3d:7e:ef:32:38, XID 2c9, IRQ 30
[    0.787508] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]

[    0.804264] r8169 0000:03:00.0 enp3s0: renamed from eth0

[    6.453049] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx

Ну вроде бы всё правильно, вот сетевая карта успешно определилась

[almukantarat]

Проблема на этапе установщика. Железо рабочее и совместимое. Другие дистрибутивы (конкретно, ROSA) ставятся нормально.

[Лия]

Проблема на этапе установщика.

Посмотреть бы логи установщика

[almukantarat]

У меня довольно старый системник: MSI Z87-G43 / Intel Core i5-4670K / 24 Gb DDR3
В наличии даже DVD-Rom. Так вот! В нём была DVD-RW болванка с Debian 8 Jessie. Лежала себе и лежала, есть не просила.
Когда я сейчас посмотрел логи установщика, увидел, что он сканирует всё железо и рапортовал, что вставлен диск с Debian 8. Думаю, давай достану. И... Все проблемы ушли.

То есть, проблема крылась во вставленном в DVD-RW привод диске с другой версией Debian.

Вывод: проверяйте наличие диска в приводе с другой версией в приводе.

Почему раньше не было этой проблемы? Не знаю. Вероятно, диск был не вставлен. Помню, что он валялся на столе, и в рамках уборки просто засунул его в комп. Чтобы не пылился) Как-то так. Прошу прощения за искусственно созданную проблему. Хотя... МОжет и стоит разработчикам поработать над инстоллятором, чтобы он не искал файлы в другом месте. Не знаю. Спасибо всем!

[Лия]

Помню, что он валялся на столе, и в рамках уборки просто засунул его в комп. Чтобы не пылился)

Оригинально
А зачем он нужен? Выкинуть, да и всё