apt update

[Лия]

а из-за чего может встроенный блютуз отваливаться, нет предположений? при этом если proxmox стоит в нем не отваливается

Посмотрим сначала на него

Код Выделить Развернуть

lsusb
lspci
И что значит - отваливается?
В

Код Выделить Развернуть

hcitool dev
пропадает? Или соединение с чем-то?

03 сентября 2024, 17:55:00
И ещё

Код Выделить Развернуть

sudo dmesg 2>&1 | grep -iE 'bluetooth|hci'
sudo journalctl -xe 2>&1 | grep -iE 'bluetooth|hci'


[ops244]

а из-за чего может встроенный блютуз отваливаться, нет предположений? при этом если proxmox стоит в нем не отваливается

Посмотрим сначала на него

Код Выделить Развернуть

lsusb
lspci
И что значит - отваливается?
В

Код Выделить Развернуть

hcitool dev
пропадает? Или соединение с чем-то?

03 сентября 2024, 17:55:00
И ещё

Код Выделить Развернуть

sudo dmesg 2>&1 | grep -iE 'bluetooth|hci'
sudo journalctl -xe 2>&1 | grep -iE 'bluetooth|hci'


Код Выделить Развернуть

root@debian:~# lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0573:1573 Zoran Co. Personal Media Division (Nogatech) USB Audio and HID
Bus 001 Device 002: ID 1a86:7523 QinHeng Electronics CH340 serial converter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Код Выделить Развернуть

root@debian:~# lspci
00:00.0 Host bridge: Intel Corporation Device 461c
00:02.0 VGA compatible controller: Intel Corporation Alder Lake-N [UHD Graphics]
00:0a.0 Signal processing controller: Intel Corporation Platform Monitoring Technology (rev 01)
00:14.0 USB controller: Intel Corporation Alder Lake-N PCH USB 3.2 xHCI Host Controller
00:14.2 RAM memory: Intel Corporation Alder Lake-N PCH Shared SRAM
00:15.0 Serial bus controller: Intel Corporation Device 54e8
00:15.3 Serial bus controller: Intel Corporation Device 54eb
00:16.0 Communication controller: Intel Corporation Alder Lake-N PCH HECI Controller
00:17.0 SATA controller: Intel Corporation Alder Lake-N SATA AHCI Controller
00:1a.0 SD Host controller: Intel Corporation Device 54c4
00:1c.0 PCI bridge: Intel Corporation Device 54be
00:1d.0 PCI bridge: Intel Corporation Alder Lake-N PCI Express Root Port
00:1f.0 ISA bridge: Intel Corporation Alder Lake-N PCH eSPI Controller
00:1f.3 Audio device: Intel Corporation Alder Lake-N PCH High Definition Audio Controller
00:1f.4 SMBus: Intel Corporation Alder Lake-N SMBus
00:1f.5 Serial bus controller: Intel Corporation Alder Lake-N SPI (flash) Controller
01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8821CE 802.11ac PCIe Wireless Network Adapter
02:00.0 Ethernet controller: Intel Corporation Ethernet Controller I225-V (rev 03)


Код Выделить Развернуть

root@debian:~# hcitool dev
Devices:


Код Выделить Развернуть

root@debian:~# sudo dmesg 2>&1 | grep -iE 'bluetooth|hci'
[    0.815525] sdhci: Secure Digital Host Controller Interface driver
[    0.815527] sdhci: Copyright(c) Pierre Ossman
[    0.825387] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.825394] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.826548] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810
[    0.826810] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.826813] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.826815] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.826854] usb usb1: Product: xHCI Host Controller
[    0.826855] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
[    0.832059] sdhci-pci 0000:00:1a.0: SDHCI controller found [8086:54c4] (rev 0)
[    0.832157] usb usb2: Product: xHCI Host Controller
[    0.832159] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
[    0.832585] mmc0: CQHCI version 5.10
[    0.837826] ahci 0000:00:17.0: version 3.0
[    0.838125] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    0.838128] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds
[    0.838435] scsi host0: ahci
[    0.838552] scsi host1: ahci
[    0.851706] mmc0: SDHCI controller on PCI [0000:00:1a.0] using ADMA 64-bit
[    1.086803] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.362815] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.642806] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    2.242816] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    3.126801] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[    3.670807] usb 1-8: new full-speed USB device number 7 using xhci_hcd
[   68.374119] Bluetooth: Core ver 2.22
[   68.374161] NET: Registered PF_BLUETOOTH protocol family
[   68.374162] Bluetooth: HCI device and connection manager initialized
[   68.374168] Bluetooth: HCI socket layer initialized
[   68.374171] Bluetooth: L2CAP socket layer initialized
[   68.374175] Bluetooth: SCO socket layer initialized
[  103.669993] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  103.669998] Bluetooth: BNEP filters: protocol multicast
[  103.670003] Bluetooth: BNEP socket layer initialized


Код Выделить Развернуть

root@debian:~# sudo journalctl -xe 2>&1 | grep -iE 'bluetooth|hci'
сен 03 18:00:37 debian systemd[1]: bluetooth.service - Bluetooth service was skipped because of an unmet condition check (ConditionPathIsDirectory=/sys/class/bluetooth).
░░ Subject: Запуск юнита bluetooth.service завершен
░░ Процесс запуска юнита bluetooth.service был завершен.
сен 03 18:00:37 debian kernel: Bluetooth: Core ver 2.22
сен 03 18:00:37 debian kernel: NET: Registered PF_BLUETOOTH protocol family
сен 03 18:00:37 debian kernel: Bluetooth: HCI device and connection manager initialized
сен 03 18:00:37 debian kernel: Bluetooth: HCI socket layer initialized
сен 03 18:00:37 debian kernel: Bluetooth: L2CAP socket layer initialized
сен 03 18:00:37 debian kernel: Bluetooth: SCO socket layer initialized
сен 03 18:01:13 debian (uetoothd)[4650]: ConfigurationDirectory 'bluetooth' already exists but the mode is different. (File system: 755 ConfigurationDirectoryMode: 555)
сен 03 18:01:13 debian systemd[1]: Starting bluetooth.service - Bluetooth service...
░░ Subject: Начинается запуск юнита bluetooth.service
░░ Начат процесс запуска юнита bluetooth.service.
сен 03 18:01:13 debian bluetoothd[4650]: Bluetooth daemon 5.66
сен 03 18:01:13 debian systemd[1]: Started bluetooth.service - Bluetooth service.
░░ Subject: Запуск юнита bluetooth.service завершен
░░ Процесс запуска юнита bluetooth.service был завершен.
сен 03 18:01:13 debian bluetoothd[4650]: Starting SDP server
сен 03 18:01:13 debian bluetoothd[4650]: profiles/audio/vcp.c:vcp_init() D-Bus experimental not enabled
сен 03 18:01:13 debian bluetoothd[4650]: src/plugin.c:plugin_init() Failed to init vcp plugin
сен 03 18:01:13 debian bluetoothd[4650]: profiles/audio/mcp.c:mcp_init() D-Bus experimental not enabled
сен 03 18:01:13 debian bluetoothd[4650]: src/plugin.c:plugin_init() Failed to init mcp plugin
сен 03 18:01:13 debian bluetoothd[4650]: profiles/audio/bap.c:bap_init() D-Bus experimental not enabled
сен 03 18:01:13 debian bluetoothd[4650]: src/plugin.c:plugin_init() Failed to init bap plugin
сен 03 18:01:13 debian kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
сен 03 18:01:13 debian kernel: Bluetooth: BNEP filters: protocol multicast
сен 03 18:01:13 debian kernel: Bluetooth: BNEP socket layer initialized
сен 03 18:01:13 debian dbus-daemon[514]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.25' (uid=0 pid=4650 comm="/usr/libexec/bluetooth/bluetoothd")
сен 03 18:01:13 debian bluetoothd[4650]: Bluetooth management interface 1.22 initialized

у меня home assistant на нем стоит, блютуз работает неделю нормально, потом после перезагрузки просто не виден в системе, думал криво установилось, все переустановил, опять вот спустя ровно неделю пропал из системы...

[Лия]

Теперь

Код Выделить Развернуть

sudo dmesg


03 сентября 2024, 18:09:58
И ещё

Код Выделить Развернуть

sudo rfkill list all


[ops244]

Теперь

Код Выделить Развернуть

sudo dmesg


Код Выделить Развернуть

root@debian:~# sudo dmesg
[    0.000000] microcode: microcode updated early to revision 0x17, date = 2023-12-07
[    0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64 root=UUID=76ee9341-9b31-4971-aa7c-50ebb6104973 ro systemd.unified_cgroup_hierarchy=false quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000070541fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000070542000-0x0000000073641fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000073642000-0x000000007370efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007370f000-0x00000000737cefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000737cf000-0x0000000073e65fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000073e66000-0x0000000073efefff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000073eff000-0x0000000073efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000073f00000-0x0000000079ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007aa00000-0x000000007abfffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b000000-0x00000000803fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fbfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.80 by American Megatrends
[    0.000000] efi: ACPI=0x737ab000 ACPI 2.0=0x737ab014 TPMFinalLog=0x7377a000 SMBIOS=0x73bc1000 SMBIOS 3.0=0x73bc0000 MEMATTR=0x68551018 ESRT=0x6cb67598 MOKvar=0x73b94000
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.5.0 present.
[    0.000000] DMI:  /, BIOS ANB03_INTEL 12/20/2023
[    0.000000] tsc: Detected 800.000 MHz processor
[    0.000000] tsc: Detected 806.400 MHz TSC
[    0.000389] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000391] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000400] last_pfn = 0x47fc00 max_arch_pfn = 0x400000000
[    0.000454] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000613] last_pfn = 0x73f00 max_arch_pfn = 0x400000000
[    0.017839] esrt: Reserving ESRT space from 0x000000006cb67598 to 0x000000006cb67648.
[    0.017844] e820: update [mem 0x6cb67000-0x6cb67fff] usable ==> reserved
[    0.017862] Using GB pages for direct mapping
[    0.018086] RAMDISK: [mem 0x3326b000-0x3592cfff]
[    0.018090] ACPI: Early table checksum verification disabled
[    0.018093] ACPI: RSDP 0x00000000737AB014 000024 (v02 ALASKA)
[    0.018097] ACPI: XSDT 0x00000000737AA728 0000FC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.018101] ACPI: FACP 0x000000007370C000 000114 (v06 ALASKA A M I    01072009 AMI  01000013)
[    0.018105] ACPI: DSDT 0x0000000073699000 07248C (v02 ALASKA A M I    01072009 INTL 20200717)
[    0.018108] ACPI: FACS 0x00000000737CE000 000040
[    0.018110] ACPI: FIDT 0x0000000073698000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.018112] ACPI: SSDT 0x000000007370E000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717)
[    0.018114] ACPI: SSDT 0x0000000073692000 005D0B (v02 CpuRef CpuSsdt  00003000 INTL 20200717)
[    0.018116] ACPI: SSDT 0x000000007368F000 002935 (v02 SaSsdt SaSsdt   00003000 INTL 20200717)
[    0.018118] ACPI: SSDT 0x000000007368B000 0033D3 (v02 INTEL  IgfxSsdt 00003000 INTL 20200717)
[    0.018120] ACPI: HPET 0x000000007370D000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.018122] ACPI: APIC 0x000000007368A000 0001DC (v05 ALASKA A M I    01072009 AMI  01000013)
[    0.018124] ACPI: MCFG 0x0000000073689000 00003C (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.018126] ACPI: SSDT 0x0000000073687000 001F1A (v02 ALASKA Ther_Rvp 00001000 INTL 20200717)
[    0.018128] ACPI: UEFI 0x0000000073761000 000048 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.018130] ACPI: NHLT 0x0000000073686000 00002D (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.018132] ACPI: LPIT 0x0000000073685000 0000CC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.018134] ACPI: SSDT 0x0000000073681000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717)
[    0.018136] ACPI: SSDT 0x000000007367E000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717)
[    0.018138] ACPI: DBGP 0x000000007367D000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.018140] ACPI: DBG2 0x000000007367C000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.018142] ACPI: SSDT 0x000000007367A000 001918 (v02 ALASKA UsbCTabl 00001000 INTL 20200717)
[    0.018144] ACPI: DMAR 0x0000000073679000 000088 (v02 INTEL  EDK2     00000002      01000013)
[    0.018146] ACPI: FPDT 0x0000000073678000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.018148] ACPI: SSDT 0x0000000073677000 00073A (v02 INTEL  xh_adl_N 00000000 INTL 20200717)
[    0.018150] ACPI: SSDT 0x0000000073673000 003AEA (v02 SocGpe SocGpe   00003000 INTL 20200717)
[    0.018152] ACPI: SSDT 0x000000007366F000 0039DA (v02 SocCmn SocCmn   00003000 INTL 20200717)
[    0.018154] ACPI: SSDT 0x000000007366E000 000144 (v02 Intel  ADebTabl 00001000 INTL 20200717)
[    0.018156] ACPI: TPM2 0x000000007366D000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.018158] ACPI: PHAT 0x000000007366C000 0005F1 (v01 ALASKA A M I    00000005 MSFT 0100000D)
[    0.018160] ACPI: WSMT 0x0000000073684000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.018162] ACPI: Reserving FACP table memory at [mem 0x7370c000-0x7370c113]
[    0.018163] ACPI: Reserving DSDT table memory at [mem 0x73699000-0x7370b48b]
[    0.018164] ACPI: Reserving FACS table memory at [mem 0x737ce000-0x737ce03f]
[    0.018164] ACPI: Reserving FIDT table memory at [mem 0x73698000-0x7369809b]
[    0.018165] ACPI: Reserving SSDT table memory at [mem 0x7370e000-0x7370e38b]
[    0.018166] ACPI: Reserving SSDT table memory at [mem 0x73692000-0x73697d0a]
[    0.018166] ACPI: Reserving SSDT table memory at [mem 0x7368f000-0x73691934]
[    0.018167] ACPI: Reserving SSDT table memory at [mem 0x7368b000-0x7368e3d2]
[    0.018167] ACPI: Reserving HPET table memory at [mem 0x7370d000-0x7370d037]
[    0.018168] ACPI: Reserving APIC table memory at [mem 0x7368a000-0x7368a1db]
[    0.018169] ACPI: Reserving MCFG table memory at [mem 0x73689000-0x7368903b]
[    0.018169] ACPI: Reserving SSDT table memory at [mem 0x73687000-0x73688f19]
[    0.018170] ACPI: Reserving UEFI table memory at [mem 0x73761000-0x73761047]
[    0.018170] ACPI: Reserving NHLT table memory at [mem 0x73686000-0x7368602c]
[    0.018171] ACPI: Reserving LPIT table memory at [mem 0x73685000-0x736850cb]
[    0.018172] ACPI: Reserving SSDT table memory at [mem 0x73681000-0x73683a82]
[    0.018172] ACPI: Reserving SSDT table memory at [mem 0x7367e000-0x73680356]
[    0.018173] ACPI: Reserving DBGP table memory at [mem 0x7367d000-0x7367d033]
[    0.018174] ACPI: Reserving DBG2 table memory at [mem 0x7367c000-0x7367c053]
[    0.018174] ACPI: Reserving SSDT table memory at [mem 0x7367a000-0x7367b917]
[    0.018175] ACPI: Reserving DMAR table memory at [mem 0x73679000-0x73679087]
[    0.018175] ACPI: Reserving FPDT table memory at [mem 0x73678000-0x73678043]
[    0.018176] ACPI: Reserving SSDT table memory at [mem 0x73677000-0x73677739]
[    0.018177] ACPI: Reserving SSDT table memory at [mem 0x73673000-0x73676ae9]
[    0.018177] ACPI: Reserving SSDT table memory at [mem 0x7366f000-0x736729d9]
[    0.018178] ACPI: Reserving SSDT table memory at [mem 0x7366e000-0x7366e143]
[    0.018179] ACPI: Reserving TPM2 table memory at [mem 0x7366d000-0x7366d04b]
[    0.018179] ACPI: Reserving PHAT table memory at [mem 0x7366c000-0x7366c5f0]
[    0.018180] ACPI: Reserving WSMT table memory at [mem 0x73684000-0x73684027]
[    0.018355] No NUMA configuration found
[    0.018355] Faking a node at [mem 0x0000000000000000-0x000000047fbfffff]
[    0.018363] NODE_DATA(0) allocated [mem 0x47fbd5000-0x47fbfffff]
[    0.018527] Zone ranges:
[    0.018528]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.018529]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.018531]   Normal   [mem 0x0000000100000000-0x000000047fbfffff]
[    0.018532]   Device   empty
[    0.018533] Movable zone start for each node
[    0.018534] Early memory node ranges
[    0.018534]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.018536]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.018536]   node   0: [mem 0x0000000000100000-0x0000000070541fff]
[    0.018537]   node   0: [mem 0x0000000073eff000-0x0000000073efffff]
[    0.018538]   node   0: [mem 0x0000000100000000-0x000000047fbfffff]
[    0.018540] Initmem setup node 0 [mem 0x0000000000001000-0x000000047fbfffff]
[    0.018545] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.018546] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.018572] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.021897] On node 0, zone DMA32: 14781 pages in unavailable ranges
[    0.022280] On node 0, zone Normal: 16640 pages in unavailable ranges
[    0.022290] On node 0, zone Normal: 1024 pages in unavailable ranges
[    0.022311] Reserving Intel graphics memory at [mem 0x7c800000-0x803fffff]
[    0.022612] ACPI: PM-Timer IO Port: 0x1808
[    0.022619] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.022621] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.022621] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.022622] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.022623] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.022623] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.022624] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.022624] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.022625] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.022625] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.022626] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.022626] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.022627] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.022627] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.022628] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.022628] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.022629] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.022630] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.022630] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.022631] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.022631] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[    0.022632] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[    0.022633] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[    0.022633] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.022670] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.022672] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.022673] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.022676] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.022677] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.022681] TSC deadline timer available
[    0.022681] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.022698] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.022700] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.022702] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.022703] PM: hibernation: Registered nosave memory: [mem 0x6cb67000-0x6cb67fff]
[    0.022704] PM: hibernation: Registered nosave memory: [mem 0x70542000-0x73641fff]
[    0.022705] PM: hibernation: Registered nosave memory: [mem 0x73642000-0x7370efff]
[    0.022705] PM: hibernation: Registered nosave memory: [mem 0x7370f000-0x737cefff]
[    0.022706] PM: hibernation: Registered nosave memory: [mem 0x737cf000-0x73e65fff]
[    0.022706] PM: hibernation: Registered nosave memory: [mem 0x73e66000-0x73efefff]
[    0.022708] PM: hibernation: Registered nosave memory: [mem 0x73f00000-0x79ffffff]
[    0.022708] PM: hibernation: Registered nosave memory: [mem 0x7a000000-0x7a9fffff]
[    0.022709] PM: hibernation: Registered nosave memory: [mem 0x7aa00000-0x7abfffff]
[    0.022709] PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0x7affffff]
[    0.022710] PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x803fffff]
[    0.022710] PM: hibernation: Registered nosave memory: [mem 0x80400000-0xbfffffff]
[    0.022711] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff]
[    0.022711] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfdffffff]
[    0.022712] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.022712] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.022713] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.022713] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.022714] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.022714] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
[    0.022715] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.022715] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
[    0.022716] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.022716] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.022717] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.022718] [mem 0x80400000-0xbfffffff] available for PCI devices
[    0.022720] Booting paravirtualized kernel on bare hardware
[    0.022722] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.026415] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.026757] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[    0.026764] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[    0.026766] pcpu-alloc: [0] 0 1 2 3
[    0.026791] Fallback order for Node 0: 0
[    0.026794] Built 1 zonelists, mobility grouping on.  Total pages: 4064317
[    0.026795] Policy zone: Normal
[    0.026796] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64 root=UUID=76ee9341-9b31-4971-aa7c-50ebb6104973 ro systemd.unified_cgroup_hierarchy=false quiet
[    0.026844] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64", will be passed to user space.
[    0.026854] random: crng init done
[    0.028637] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.029581] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.029620] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.029629] software IO TLB: area num 4.
[    0.053477] Memory: 1738484K/16515972K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 572316K reserved, 0K cma-reserved)
[    0.053573] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.053598] ftrace: allocating 40246 entries in 158 pages
[    0.055909] ftrace: allocated 158 pages with 5 groups
[    0.056233] Dynamic Preempt: voluntary
[    0.056255] rcu: Preemptible hierarchical RCU implementation.
[    0.056256] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.056257]  Trampoline variant of Tasks RCU enabled.
[    0.056257]  Rude variant of Tasks RCU enabled.
[    0.056258]  Tracing variant of Tasks RCU enabled.
[    0.056258] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.056259] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.059759] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.060036] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.060244] Console: colour dummy device 80x25
[    0.060261] printk: console [tty0] enabled
[    0.060273] ACPI: Core revision 20220331
[    0.060584] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.060585] APIC: Switch to symmetric I/O mode setup
[    0.060586] DMAR: Host address width 39
[    0.060587] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.060594] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[    0.060596] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.060599] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[    0.060601] DMAR: RMRR base: 0x0000007c000000 end: 0x000000803fffff
[    0.060604] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.060605] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.060605] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.062278] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.062280] x2apic enabled
[    0.062309] Switched APIC routing to cluster x2apic.
[    0.066834] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xb9fb05486c, max_idle_ns: 440795231721 ns
[    0.066841] Calibrating delay loop (skipped), value calculated using timer frequency.. 1612.80 BogoMIPS (lpj=3225600)
[    0.066869] CPU0: Thermal monitoring enabled (TM1)
[    0.066870] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.066937] process: using mwait in idle threads
[    0.066939] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.066940] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.066942] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.066944] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.066945] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.066946] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.066947] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.066948] Register File Data Sampling: Mitigation: Clear Register File
[    0.066955] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.066957] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.066957] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.066958] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.066959] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.066961] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.066962] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[    0.070838] Freeing SMP alternatives memory: 36K
[    0.070838] pid_max: default: 32768 minimum: 301
[    0.070838] LSM: Security Framework initializing
[    0.070838] landlock: Up and running.
[    0.070838] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.070838] AppArmor: AppArmor initialized
[    0.070838] TOMOYO Linux initialized
[    0.070838] LSM support for eBPF active
[    0.070838] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.070838] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.070838] smpboot: CPU0: Intel(R) N100 (family: 0x6, model: 0xbe, stepping: 0x0)
[    0.070838] cblist_init_generic: Setting adjustable number of callback queues.
[    0.070838] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.070838] cblist_init_generic: Setting adjustable number of callback queues.
[    0.070838] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.070838] cblist_init_generic: Setting adjustable number of callback queues.
[    0.070838] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.070838] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, PEBS-via-PT,  AnyThread deprecated, Gracemont events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.070838] ... version:                5
[    0.070838] ... bit width:              48
[    0.070838] ... generic registers:      6
[    0.070838] ... value mask:             0000ffffffffffff
[    0.070838] ... max period:             00007fffffffffff
[    0.070838] ... fixed-purpose events:   3
[    0.070838] ... event mask:             000000070000003f
[    0.070838] signal: max sigframe size: 3632
[    0.070838] Estimated ratio of average max frequency by base frequency (times 1024): 3712
[    0.070838] rcu: Hierarchical SRCU implementation.
[    0.070838] rcu:     Max phase no-delay instances is 1000.
[    0.070838] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.070838] smp: Bringing up secondary CPUs ...
[    0.070838] x86: Booting SMP configuration:
[    0.070838] .... node  #0, CPUs:      #1 #2 #3
[    0.073166] smp: Brought up 1 node, 4 CPUs
[    0.073166] smpboot: Max logical packages: 1
[    0.073166] smpboot: Total of 4 processors activated (6451.20 BogoMIPS)
[    0.098860] node 0 deferred pages initialised in 28ms
[    0.100872] devtmpfs: initialized
[    0.100872] x86/mm: Memory block size: 128MB
[    0.100872] ACPI: PM: Registering ACPI NVS region [mem 0x7370f000-0x737cefff] (786432 bytes)
[    0.100872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.100872] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.100872] pinctrl core: initialized pinctrl subsystem
[    0.103093] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.103397] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.103631] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.103881] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.103896] audit: initializing netlink subsys (disabled)
[    0.103910] audit: type=2000 audit(1725375569.036:1): state=initialized audit_enabled=0 res=1
[    0.103910] thermal_sys: Registered thermal governor 'fair_share'
[    0.103910] thermal_sys: Registered thermal governor 'bang_bang'
[    0.103910] thermal_sys: Registered thermal governor 'step_wise'
[    0.103910] thermal_sys: Registered thermal governor 'user_space'
[    0.103910] thermal_sys: Registered thermal governor 'power_allocator'
[    0.103910] cpuidle: using governor ladder
[    0.103910] cpuidle: using governor menu
[    0.103910] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.103910] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.103910] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.103910] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.103910] PCI: Using configuration type 1 for base access
[    0.103910] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.103910] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.103910] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.103910] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.103910] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.103910] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.103910] ACPI: Added _OSI(Module Device)
[    0.103910] ACPI: Added _OSI(Processor Device)
[    0.103910] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.103910] ACPI: Added _OSI(Processor Aggregator Device)
[    0.180586] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20220331/dswload2-162)
[    0.180597] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220)
[    0.180601] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
[    0.180604] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20220331/dswload2-162)
[    0.180608] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220)
[    0.180610] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
[    0.182612] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.191326] ACPI: Dynamic OEM Table Load:
[    0.191336] ACPI: SSDT 0xFFFF9E57D4BBC400 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20200717)
[    0.191999] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.195762] ACPI: Dynamic OEM Table Load:
[    0.195768] ACPI: SSDT 0xFFFF9E5581231C00 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20200717)
[    0.196571] ACPI: Dynamic OEM Table Load:
[    0.196576] ACPI: SSDT 0xFFFF9E57D4BBD000 0001A3 (v02 PmRef  Cpu0Ist  00003000 INTL 20200717)
[    0.197412] ACPI: Dynamic OEM Table Load:
[    0.197418] ACPI: SSDT 0xFFFF9E57D4B2B800 0004B5 (v02 PmRef  Cpu0Hwp  00003000 INTL 20200717)
[    0.198527] ACPI: Dynamic OEM Table Load:
[    0.198536] ACPI: SSDT 0xFFFF9E57D4B22000 001BAF (v02 PmRef  ApIst    00003000 INTL 20200717)
[    0.199866] ACPI: Dynamic OEM Table Load:
[    0.199872] ACPI: SSDT 0xFFFF9E57D4B24000 001038 (v02 PmRef  ApHwp    00003000 INTL 20200717)
[    0.201041] ACPI: Dynamic OEM Table Load:
[    0.201048] ACPI: SSDT 0xFFFF9E57D4B26000 001349 (v02 PmRef  ApPsd    00003000 INTL 20200717)
[    0.202270] ACPI: Dynamic OEM Table Load:
[    0.202276] ACPI: SSDT 0xFFFF9E5580126000 000FBB (v02 PmRef  ApCst    00003000 INTL 20200717)
[    0.204927] ACPI: Interpreter enabled
[    0.204977] ACPI: PM: (supports S0 S3 S4 S5)
[    0.204979] ACPI: Using IOAPIC for interrupt routing
[    0.205026] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.205027] PCI: Ignoring E820 reservations for host bridge windows
[    0.205930] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.223930] ACPI: PM: Power Resource [WRST]
[    0.230430] ACPI: PM: Power Resource [FN00]
[    0.230480] ACPI: PM: Power Resource [FN01]
[    0.230528] ACPI: PM: Power Resource [FN02]
[    0.230575] ACPI: PM: Power Resource [FN03]
[    0.230622] ACPI: PM: Power Resource [FN04]
[    0.231055] ACPI: PM: Power Resource [PIN]
[    0.231293] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[    0.231300] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.231432] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.231678] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.231679] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.233103] PCI host bridge to bus 0000:00
[    0.233105] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.233107] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.233108] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.233110] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.233111] pci_bus 0000:00: root bus resource [mem 0x80400000-0xbfffffff window]
[    0.233112] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.233114] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.233148] pci 0000:00:00.0: [8086:461c] type 00 class 0x060000
[    0.233277] pci 0000:00:02.0: [8086:46d1] type 00 class 0x030000
[    0.233286] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
[    0.233292] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.233296] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.233310] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.233313] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.233339] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[    0.233341] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[    0.233345] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[    0.233347] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[    0.233492] pci 0000:00:0a.0: [8086:467d] type 00 class 0x118000
[    0.233499] pci 0000:00:0a.0: reg 0x10: [mem 0x6001110000-0x6001117fff 64bit]
[    0.233517] pci 0000:00:0a.0: enabling Extended Tags
[    0.233633] pci 0000:00:14.0: [8086:54ed] type 00 class 0x0c0330
[    0.233655] pci 0000:00:14.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit]
[    0.233741] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.235332] pci 0000:00:14.2: [8086:54ef] type 00 class 0x050000
[    0.235353] pci 0000:00:14.2: reg 0x10: [mem 0x6001124000-0x6001127fff 64bit]
[    0.235367] pci 0000:00:14.2: reg 0x18: [mem 0x600112d000-0x600112dfff 64bit]
[    0.235575] pci 0000:00:15.0: [8086:54e8] type 00 class 0x0c8000
[    0.235644] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.235945] pci 0000:00:15.3: [8086:54eb] type 00 class 0x0c8000
[    0.236015] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.236356] pci 0000:00:16.0: [8086:54e0] type 00 class 0x078000
[    0.236380] pci 0000:00:16.0: reg 0x10: [mem 0x600112a000-0x600112afff 64bit]
[    0.236467] pci 0000:00:16.0: PME# supported from D3hot
[    0.236892] pci 0000:00:17.0: [8086:54d3] type 00 class 0x010601
[    0.236909] pci 0000:00:17.0: reg 0x10: [mem 0x80700000-0x80701fff]
[    0.236918] pci 0000:00:17.0: reg 0x14: [mem 0x80703000-0x807030ff]
[    0.236927] pci 0000:00:17.0: reg 0x18: [io  0x4090-0x4097]
[    0.236937] pci 0000:00:17.0: reg 0x1c: [io  0x4080-0x4083]
[    0.236946] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.236955] pci 0000:00:17.0: reg 0x24: [mem 0x80702000-0x807027ff]
[    0.237004] pci 0000:00:17.0: PME# supported from D3hot
[    0.237245] pci 0000:00:1a.0: [8086:54c4] type 00 class 0x080501
[    0.237268] pci 0000:00:1a.0: reg 0x10: [mem 0x6001129000-0x6001129fff 64bit]
[    0.237559] pci 0000:00:1c.0: [8086:54be] type 01 class 0x060400
[    0.237656] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.237688] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[    0.238125] pci 0000:00:1d.0: [8086:54b2] type 01 class 0x060400
[    0.238221] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.238253] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.238679] pci 0000:00:1f.0: [8086:5481] type 00 class 0x060100
[    0.238984] pci 0000:00:1f.3: [8086:54c8] type 00 class 0x040300
[    0.239026] pci 0000:00:1f.3: reg 0x10: [mem 0x6001120000-0x6001123fff 64bit]
[    0.239081] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit]
[    0.239185] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.239281] pci 0000:00:1f.4: [8086:54a3] type 00 class 0x0c0500
[    0.239303] pci 0000:00:1f.4: reg 0x10: [mem 0x6001128000-0x60011280ff 64bit]
[    0.239325] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.239523] pci 0000:00:1f.5: [8086:54a4] type 00 class 0x0c8000
[    0.239542] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.239718] pci 0000:01:00.0: [10ec:c821] type 00 class 0x028000
[    0.239740] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.239768] pci 0000:01:00.0: reg 0x18: [mem 0x80600000-0x8060ffff 64bit]
[    0.239918] pci 0000:01:00.0: supports D1 D2
[    0.239919] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.240169] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.240173] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.240176] pci 0000:00:1c.0:   bridge window [mem 0x80600000-0x806fffff]
[    0.240252] pci 0000:02:00.0: [8086:15f3] type 00 class 0x020000
[    0.240274] pci 0000:02:00.0: reg 0x10: [mem 0x80400000-0x804fffff]
[    0.240309] pci 0000:02:00.0: reg 0x1c: [mem 0x80500000-0x80503fff]
[    0.240445] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.240635] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.240640] pci 0000:00:1d.0:   bridge window [mem 0x80400000-0x805fffff]
[    0.241417] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.241511] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.241603] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.241694] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.241785] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.241876] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.241966] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.242057] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.251532] iommu: Default domain type: Translated
[    0.251532] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.251532] pps_core: LinuxPPS API ver. 1 registered
[    0.251532] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.251532] PTP clock support registered
[    0.251532] EDAC MC: Ver: 3.0.0
[    0.251532] Registered efivars operations
[    0.251532] NetLabel: Initializing
[    0.251532] NetLabel:  domain hash size = 128
[    0.251532] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.251532] NetLabel:  unlabeled traffic allowed by default
[    0.251532] PCI: Using ACPI for IRQ routing
[    0.274836] PCI: pci_cache_line_size set to 64 bytes
[    0.274919] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[    0.274995] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.274997] e820: reserve RAM buffer [mem 0x6cb67000-0x6fffffff]
[    0.274998] e820: reserve RAM buffer [mem 0x70542000-0x73ffffff]
[    0.274999] e820: reserve RAM buffer [mem 0x73f00000-0x73ffffff]
[    0.275000] e820: reserve RAM buffer [mem 0x47fc00000-0x47fffffff]
[    0.275012] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.275012] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.275012] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.275012] vgaarb: loaded
[    0.276512] clocksource: Switched to clocksource tsc-early
[    0.276620] VFS: Disk quotas dquot_6.6.0
[    0.276630] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.276735] AppArmor: AppArmor Filesystem Enabled
[    0.276750] pnp: PnP ACPI init
[    0.277016] system 00:00: [io  0x0a00-0x0a1f] has been reserved
[    0.277018] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.277020] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.277163] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.277165] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.277273] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.277721] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    0.277744] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    0.277746] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.277748] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.277749] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.277751] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.277752] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.277753] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.278504] system 00:04: [io  0x2000-0x20fe] has been reserved
[    0.278504] pnp: PnP ACPI: found 6 devices
[    0.283162] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.283220] NET: Registered PF_INET protocol family
[    0.283465] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.286283] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.286335] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.286456] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)


[ops244]

Код Выделить Развернуть

[    0.286800] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.286900] TCP: Hash tables configured (established 131072 bind 65536)
[    0.287000] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.287054] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.287099] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.287144] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.287150] NET: Registered PF_XDP protocol family
[    0.287160] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[    0.287172] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[    0.287178] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[    0.287180] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[    0.287237] pci 0000:00:15.3: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[    0.287294] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80704000-0x80704fff]
[    0.287306] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.287308] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.287312] pci 0000:00:1c.0:   bridge window [mem 0x80600000-0x806fffff]
[    0.287319] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.287323] pci 0000:00:1d.0:   bridge window [mem 0x80400000-0x805fffff]
[    0.287330] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.287331] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.287332] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.287334] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
[    0.287335] pci_bus 0000:00: resource 8 [mem 0x80400000-0xbfffffff window]
[    0.287336] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[    0.287337] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.287338] pci_bus 0000:01: resource 1 [mem 0x80600000-0x806fffff]
[    0.287339] pci_bus 0000:02: resource 1 [mem 0x80400000-0x805fffff]
[    0.287830] PCI: CLS 64 bytes, default 64
[    0.287867] DMAR: No ATSR found
[    0.287868] DMAR: No SATC found
[    0.287869] DMAR: IOMMU feature fl1gp_support inconsistent
[    0.287870] DMAR: IOMMU feature pgsel_inv inconsistent
[    0.287871] DMAR: IOMMU feature nwfs inconsistent
[    0.287872] DMAR: IOMMU feature dit inconsistent
[    0.287872] DMAR: IOMMU feature sc_support inconsistent
[    0.287873] DMAR: IOMMU feature dev_iotlb_support inconsistent
[    0.287874] DMAR: dmar0: Using Queued invalidation
[    0.287877] DMAR: dmar1: Using Queued invalidation
[    0.287912] Trying to unpack rootfs image as initramfs...
[    0.287966] pci 0000:00:02.0: Adding to iommu group 0
[    0.288000] pci 0000:00:00.0: Adding to iommu group 1
[    0.288006] pci 0000:00:0a.0: Adding to iommu group 2
[    0.288017] pci 0000:00:14.0: Adding to iommu group 3
[    0.288023] pci 0000:00:14.2: Adding to iommu group 3
[    0.288033] pci 0000:00:15.0: Adding to iommu group 4
[    0.288041] pci 0000:00:15.3: Adding to iommu group 4
[    0.288050] pci 0000:00:16.0: Adding to iommu group 5
[    0.288061] pci 0000:00:17.0: Adding to iommu group 6
[    0.288069] pci 0000:00:1a.0: Adding to iommu group 7
[    0.288080] pci 0000:00:1c.0: Adding to iommu group 8
[    0.288090] pci 0000:00:1d.0: Adding to iommu group 9
[    0.288103] pci 0000:00:1f.0: Adding to iommu group 10
[    0.288110] pci 0000:00:1f.3: Adding to iommu group 10
[    0.288116] pci 0000:00:1f.4: Adding to iommu group 10
[    0.288123] pci 0000:00:1f.5: Adding to iommu group 10
[    0.288134] pci 0000:01:00.0: Adding to iommu group 11
[    0.288143] pci 0000:02:00.0: Adding to iommu group 12
[    0.288871] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.288874] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.288875] software IO TLB: mapped [mem 0x0000000064551000-0x0000000068551000] (64MB)
[    0.288920] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xb9fb05486c, max_idle_ns: 440795231721 ns
[    0.288944] clocksource: Switched to clocksource tsc
[    0.288980] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.294989] Initialise system trusted keyrings
[    0.295001] Key type blacklist registered
[    0.295038] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.296016] zbud: loaded
[    0.296195] integrity: Platform Keyring initialized
[    0.296200] integrity: Machine keyring initialized
[    0.296201] Key type asymmetric registered
[    0.296202] Asymmetric key parser 'x509' registered
[    0.514876] Freeing initrd memory: 39688K
[    0.518834] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.518860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.518886] io scheduler mq-deadline registered
[    0.519851] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[    0.520097] pcieport 0000:00:1d.0: AER: enabled with IRQ 123
[    0.520183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.521349] thermal LNXTHERM:00: registered as thermal_zone0
[    0.521351] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.521475] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.522179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.522569] hpet_acpi_add: no address or irqs in _CRS
[    0.522587] Linux agpgart interface v0.103
[    0.529496] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.529725] i8042: PNP: No PS/2 controller found.
[    0.529824] mousedev: PS/2 mouse device common for all mice
[    0.529844] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.530782] rtc_cmos rtc_cmos: registered as rtc0
[    0.530960] rtc_cmos rtc_cmos: setting system clock to 2024-09-03T14:59:30 UTC (1725375570)
[    0.530987] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.531105] intel_pstate: Intel P-state driver initializing
[    0.531327] intel_pstate: HWP enabled
[    0.531348] ledtrig-cpu: registered to indicate activity on CPUs
[    0.540940] NET: Registered PF_INET6 protocol family
[    0.544572] Segment Routing with IPv6
[    0.544582] In-situ OAM (IOAM) with IPv6
[    0.544598] mip6: Mobile IPv6
[    0.544601] NET: Registered PF_PACKET protocol family
[    0.544686] mpls_gso: MPLS GSO support
[    0.545049] microcode: sig=0xb06e0, pf=0x1, revision=0x17
[    0.545060] microcode: Microcode Update Driver: v2.2.
[    0.545134] resctrl: L2 allocation detected
[    0.545139] IPI shorthand broadcast: enabled
[    0.545163] sched_clock: Marking stable (538503102, 6623054)->(558751309, -13625153)
[    0.545369] registered taskstats version 1
[    0.545376] Loading compiled-in X.509 certificates
[    0.560421] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    0.560434] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[    0.560877] zswap: loaded using pool lzo/zbud
[    0.561114] Key type .fscrypt registered
[    0.561115] Key type fscrypt-provisioning registered
[    0.564550] Key type encrypted registered
[    0.564555] AppArmor: AppArmor sha1 policy hashing enabled
[    0.564886] ima: Allocated hash algorithm: sha256
[    0.581838] ima: No architecture policies found
[    0.581863] evm: Initialising EVM extended attributes:
[    0.581864] evm: security.selinux
[    0.581867] evm: security.SMACK64 (disabled)
[    0.581868] evm: security.SMACK64EXEC (disabled)
[    0.581870] evm: security.SMACK64TRANSMUTE (disabled)
[    0.581871] evm: security.SMACK64MMAP (disabled)
[    0.581872] evm: security.apparmor
[    0.581874] evm: security.ima
[    0.581875] evm: security.capability
[    0.581877] evm: HMAC attrs: 0x1
[    0.667298] clk: Disabling unused clocks
[    0.668236] Freeing unused decrypted memory: 2036K
[    0.668693] Freeing unused kernel image (initmem) memory: 2796K
[    0.668695] Write protecting the kernel read-only data: 26624k
[    0.669220] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    0.669395] Freeing unused kernel image (rodata/data gap) memory: 1168K
[    0.700422] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.700427] Run /init as init process
[    0.700429]   with arguments:
[    0.700429]     /init
[    0.700430]   with environment:
[    0.700431]     HOME=/
[    0.700431]     TERM=linux
[    0.700432]     BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64
[    0.809497] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    0.809816] ACPI: bus type USB registered
[    0.809835] usbcore: registered new interface driver usbfs
[    0.809841] usbcore: registered new interface driver hub
[    0.809850] usbcore: registered new device driver usb
[    0.809875] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    0.812774] Intel(R) 2.5G Ethernet Linux Driver
[    0.812778] Copyright(c) 2018 Intel Corporation.
[    0.815397] SCSI subsystem initialized
[    0.815525] sdhci: Secure Digital Host Controller Interface driver
[    0.815527] sdhci: Copyright(c) Pierre Ossman
[    0.819845] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[    0.820012] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.820077] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.822789] i2c i2c-0: 1/2 memory slots populated (from DMI)
[    0.823246] i2c i2c-0: Successfully instantiated SPD at 0x50
[    0.823274] igc 0000:02:00.0: PTM enabled, 4ns granularity
[    0.825387] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.825394] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.826548] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810
[    0.826810] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.826813] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.826815] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.826850] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.826852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.826854] usb usb1: Product: xHCI Host Controller
[    0.826855] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
[    0.826856] usb usb1: SerialNumber: 0000:00:14.0
[    0.826956] hub 1-0:1.0: USB hub found
[    0.826978] hub 1-0:1.0: 12 ports detected
[    0.832059] sdhci-pci 0000:00:1a.0: SDHCI controller found [8086:54c4] (rev 0)
[    0.832152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    0.832156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.832157] usb usb2: Product: xHCI Host Controller
[    0.832159] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
[    0.832160] usb usb2: SerialNumber: 0000:00:14.0
[    0.832585] mmc0: CQHCI version 5.10
[    0.833915] libata version 3.00 loaded.
[    0.834638] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006)
[    0.834933] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    0.837826] ahci 0000:00:17.0: version 3.0
[    0.838125] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    0.838128] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds
[    0.838435] scsi host0: ahci
[    0.838552] scsi host1: ahci
[    0.838585] ata1: DUMMY
[    0.838587] ata2: SATA max UDMA/133 abar m2048@0x80702000 port 0x80702180 irq 125
[    0.838731] hub 2-0:1.0: USB hub found
[    0.838747] hub 2-0:1.0: 4 ports detected
[    0.851706] mmc0: SDHCI controller on PCI [0000:00:1a.0] using ADMA 64-bit
[    0.875837] pps pps0: new PPS source ptp0
[    0.875989] igc 0000:02:00.0 (unnamed net_device) (uninitialized): PHC added
[    0.901804] igc 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[    0.901821] igc 0000:02:00.0 eth0: MAC: e0:51:d8:12:13:6c
[    1.086803] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.155630] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.155859] ata2.00: ATA-11: MG BGM.2 NGFF SSD 256GB, HP3618CN, max UDMA/133
[    1.164540] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.189430] ata2.00: configured for UDMA/133
[    1.189964] scsi 1:0:0:0: Direct-Access     ATA      MG BGM.2 NGFF SS 18CN PQ: 0 ANSI: 5
[    1.214859] igc 0000:02:00.0 enp2s0: renamed from eth0
[    1.233428] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.233467] sd 1:0:0:0: [sda] Write Protect is off
[    1.233477] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.233546] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.233623] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    1.235620] usb 1-4: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64
[    1.235630] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.235635] usb 1-4: Product: USB Serial
[    1.236651]  sda: sda1 sda2 sda3
[    1.236921] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.362815] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.513692] usb 1-6: New USB device found, idVendor=0573, idProduct=1573, bcdDevice=80.07
[    1.513710] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.513716] usb 1-6: Product: USB Audio and HID
[    1.513720] usb 1-6: Manufacturer: CSCTEK
[    1.513724] usb 1-6: SerialNumber: A34004801402
[    1.642806] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    1.770948] usb 1-8: device descriptor read/64, error -71
[    2.006951] usb 1-8: device descriptor read/64, error -71
[    2.242816] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    2.370948] usb 1-8: device descriptor read/64, error -71
[    2.606952] usb 1-8: device descriptor read/64, error -71
[    2.715061] usb usb1-port8: attempt power cycle
[    3.126801] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[    3.127063] usb 1-8: Device not responding to setup address.
[    3.335044] usb 1-8: Device not responding to setup address.
[    3.542799] usb 1-8: device not accepting address 6, error -71
[    3.670807] usb 1-8: new full-speed USB device number 7 using xhci_hcd
[    3.671066] usb 1-8: Device not responding to setup address.
[    3.879048] usb 1-8: Device not responding to setup address.
[    4.086792] usb 1-8: device not accepting address 7, error -71
[    4.087068] usb usb1-port8: unable to enumerate USB device
[    4.117907] hid: raw HID events driver (C) Jiri Kosina
[    4.123845] usbhid 1-6:1.3: couldn't find an input interrupt endpoint
[    4.123870] usbcore: registered new interface driver usbhid
[    4.123872] usbhid: USB HID core driver
[    4.177144] PM: Image not found (code -22)
[    4.322885] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[    4.370270] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    4.498216] systemd[1]: Inserted module 'autofs4'
[    4.553468] systemd[1]: systemd 252.30-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    4.553484] systemd[1]: Detected architecture x86-64.
[    4.601224] systemd[1]: Hostname set to <debian>.
[    4.820946] systemd[1]: Queued start job for default target graphical.target.
[    4.847355] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    4.847894] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    4.848358] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    4.848752] systemd[1]: Created slice user.slice - User and Session Slice.
[    4.848819] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[    4.848872] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    4.849035] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    4.849059] systemd[1]: Expecting device dev-disk-by\x2duuid-F44D\x2dDDCD.device - /dev/disk/by-uuid/F44D-DDCD...
[    4.849071] systemd[1]: Expecting device dev-disk-by\x2duuid-fbb32c05\x2db308\x2d4b6c\x2d8772\x2d1bc2155be9d2.device - /dev/disk/by-uuid/fbb32c05-b308-4b6c-8772-1bc2155be9d2...
[    4.849085] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[    4.849107] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    4.849138] systemd[1]: Reached target paths.target - Path Units.
[    4.849164] systemd[1]: Reached target slices.target - Slice Units.
[    4.849190] systemd[1]: Reached target time-set.target - System Time Set.
[    4.849222] systemd[1]: Reached target time-sync.target - System Time Synchronized.
[    4.849254] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    4.852597] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[    4.853939] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[    4.854008] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    4.854260] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[    4.854382] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    4.854497] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[    4.855025] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    4.855116] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    4.856159] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    4.857384] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    4.859006] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    4.860763] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    4.860856] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[    4.863088] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[    4.864670] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    4.866323] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    4.870497] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[    4.872682] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    4.875334] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    4.877794] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    4.880258] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[    4.880504] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    4.885006] systemd[1]: Starting systemd-journald.service - Journal Service...
[    4.889554] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    4.892451] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    4.896354] pstore: Using crash dump compression: deflate
[    4.896745] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    4.901110] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    4.901432] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    4.901648] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    4.901848] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    4.902675] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    4.903589] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.904062] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[    4.907157] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[    4.915687] loop: module loaded
[    4.918428] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    4.918768] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[    4.919038] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[    4.920370] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    4.920411] device-mapper: uevent: version 1.0.3
[    4.920519] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    4.921239] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    4.921500] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[    4.921703] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[    4.922699] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[    4.923481] pstore: Registered efi as persistent store backend
[    4.924122] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[    4.924507] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    4.924797] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[    4.925080] EXT4-fs (sda2): re-mounted. Quota mode: none.
[    4.928042] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[    4.928183] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[    4.928226] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    4.929434] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[    4.930850] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[    4.931793] fuse: init (API version 7.37)
[    4.933298] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.933525] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[    4.935038] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[    4.937824] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[    4.942546] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[    4.949876] ACPI: bus type drm_connector registered
[    4.951330] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.951507] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    4.957116] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[    4.957208] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[    4.964893] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[    4.965954] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[    4.974501] systemd[1]: Started systemd-journald.service - Journal Service.
[    4.982185] systemd-journald[250]: Received client request to flush runtime journal.
[    5.215759] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    5.235844] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    5.235870] ACPI: button: Sleep Button [SLPB]
[    5.235918] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    5.235936] ACPI: button: Power Button [PWRB]
[    5.235967] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    5.236830] ACPI: button: Power Button [PWRF]
[    5.276749] intel_pmc_core INT33A1:00:  initialized
[    5.283173] input: Intel HID events as /devices/platform/INTC1070:00/input/input3
[    5.283190] intel-hid INTC1070:00: failed to enable HID power button
[    5.318878] Adding 1000444k swap on /dev/sda3.  Priority:-2 extents:1 across:1000444k SSFS
[    5.360254] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.380659] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.390091] iTCO_vendor_support: vendor-support=0
[    5.460004] usbcore: registered new interface driver usbserial_generic
[    5.460015] usbserial: USB Serial support registered for generic
[    5.465140] usbcore: registered new interface driver ch341
[    5.465151] usbserial: USB Serial support registered for ch341-uart
[    5.465165] ch341 1-4:1.0: ch341-uart converter detected
[    5.465264] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    5.466310] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.484274] usb 1-4: ch341-uart converter now attached to ttyUSB0
[    5.510863] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    5.512731] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.512916] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    5.513109] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    5.513277] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.513455] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    5.515094] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    5.515703] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    5.541236] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.541240] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.541241] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.541242] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.541243] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    5.544798] mc: Linux media interface: v0.10
[    5.563450] cryptd: max_cpu_qlen set to 1000
[    5.584720] AVX2 version of gcm_enc/dec engaged.
[    5.584755] AES CTR mode by8 optimization enabled
[    5.627019] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.640492] usb 1-6: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
[    5.640497] usb 1-6: [5] FU [Mic Capture Volume] ch = 1, val = -8192/-1/16
[    5.642558] usb 1-6: Warning! Unlikely big volume range (=896), cval->res is probably wrong.
[    5.642560] usb 1-6: [6] FU [PCM Playback Volume] ch = 2, val = -16384/-2048/16
[    5.643435] usbcore: registered new interface driver snd-usb-audio
[    5.679344] rtw_8821ce 0000:01:00.0: enabling device (0000 -> 0003)
[    5.688826] rtw_8821ce 0000:01:00.0: firmware: direct-loading firmware rtw88/rtw8821c_fw.bin
[    5.688835] rtw_8821ce 0000:01:00.0: Firmware version 24.11.0, H2C version 12
[    5.869023] i915 0000:00:02.0: [drm] VT-d active for gfx access
[    5.869055] i915 0000:00:02.0: vgaarb: deactivate vga console
[    5.869111] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[    5.869483] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.870090] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    5.873065] i915 0000:00:02.0: firmware: direct-loading firmware i915/adlp_dmc_ver2_16.bin
[    5.874732] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc_ver2_16.bin (v2.16)
[    5.875301] i915 0000:00:02.0: firmware: direct-loading firmware i915/tgl_guc_70.bin
[    5.878439] i915 0000:00:02.0: firmware: direct-loading firmware i915/tgl_huc.bin
[    5.934712] rtw_8821ce 0000:01:00.0 wlp1s0: renamed from wlan0
[    6.002785] audit: type=1400 audit(1725375575.963:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=460 comm="apparmor_parser"
[    6.006279] audit: type=1400 audit(1725375575.967:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=463 comm="apparmor_parser"
[    6.006286] audit: type=1400 audit(1725375575.967:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=463 comm="apparmor_parser"
[    6.006288] audit: type=1400 audit(1725375575.967:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=463 comm="apparmor_parser"
[    6.006487] i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin version 70.5.1
[    6.006491] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 7.9.3
[    6.008463] audit: type=1400 audit(1725375575.971:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=461 comm="apparmor_parser"
[    6.008469] audit: type=1400 audit(1725375575.971:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=461 comm="apparmor_parser"
[    6.012980] i915 0000:00:02.0: [drm] HuC authenticated
[    6.013395] i915 0000:00:02.0: [drm] GuC submission enabled
[    6.013397] i915 0000:00:02.0: [drm] GuC SLPC enabled
[    6.013912] audit: type=1400 audit(1725375575.975:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=470 comm="apparmor_parser"
[    6.014119] i915 0000:00:02.0: [drm] GuC RC: enabled
[    6.021024] audit: type=1400 audit(1725375575.983:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=462 comm="apparmor_parser"
[    6.021029] audit: type=1400 audit(1725375575.983:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=462 comm="apparmor_parser"
[    6.021031] audit: type=1400 audit(1725375575.983:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=462 comm="apparmor_parser"
[    6.025406] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    6.025448] RPC: Registered named UNIX socket transport module.
[    6.025451] RPC: Registered udp transport module.
[    6.025451] RPC: Registered tcp transport module.
[    6.025452] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.027390] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.028354] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    6.029372] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.029554] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[    6.029660] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[    6.041305] intel_rapl_common: Found RAPL domain package
[    6.041310] intel_rapl_common: Found RAPL domain core
[    6.041311] intel_rapl_common: Found RAPL domain uncore
[    6.041312] intel_rapl_common: Found RAPL domain psys
[    6.069209] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[    6.069272] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[    6.070596] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    6.070690] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    6.421229] NET: Registered PF_QIPCRTR protocol family
[    9.639145] igc 0000:02:00.0 enp2s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[    9.854841] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   12.227670] kauditd_printk_skb: 4 callbacks suppressed
[   12.227673] audit: type=1400 audit(1725375582.192:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=691 comm="apparmor_parser"
[   12.680244] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   12.681927] Bridge firewalling registered
[   12.858567] Initializing XFRM netlink socket
[   13.524185] hassio: port 1(vethda53374) entered blocking state
[   13.524193] hassio: port 1(vethda53374) entered disabled state
[   13.524409] device vethda53374 entered promiscuous mode
[   13.524816] hassio: port 1(vethda53374) entered blocking state
[   13.524824] hassio: port 1(vethda53374) entered forwarding state
[   13.524882] IPv6: ADDRCONF(NETDEV_CHANGE): hassio: link becomes ready
[   13.525002] hassio: port 1(vethda53374) entered disabled state
[   13.837048] new mount options do not match the existing superblock, will be ignored
[   13.923674] eth0: renamed from vethe278636
[   13.939723] IPv6: ADDRCONF(NETDEV_CHANGE): vethda53374: link becomes ready
[   13.939813] hassio: port 1(vethda53374) entered blocking state
[   13.939821] hassio: port 1(vethda53374) entered forwarding state
[   14.559756] docker0: port 1(vethefa02a0) entered blocking state
[   14.559764] docker0: port 1(vethefa02a0) entered disabled state
[   14.559919] device vethefa02a0 entered promiscuous mode
[   14.560221] docker0: port 1(vethefa02a0) entered blocking state
[   14.560227] docker0: port 1(vethefa02a0) entered forwarding state
[   14.560317] docker0: port 1(vethefa02a0) entered disabled state
[   14.625937] hassio: port 2(veth3f3619d) entered blocking state
[   14.625946] hassio: port 2(veth3f3619d) entered disabled state
[   14.626137] device veth3f3619d entered promiscuous mode
[   14.626716] hassio: port 2(veth3f3619d) entered blocking state
[   14.626724] hassio: port 2(veth3f3619d) entered forwarding state
[   14.835280] eth0: renamed from vethe111122
[   14.851586] hassio: port 2(veth3f3619d) entered disabled state
[   14.851763] IPv6: ADDRCONF(NETDEV_CHANGE): vethefa02a0: link becomes ready
[   14.851846] docker0: port 1(vethefa02a0) entered blocking state
[   14.851851] docker0: port 1(vethefa02a0) entered forwarding state
[   14.851990] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[   14.915717] eth1: renamed from veth4edb42e
[   14.939899] IPv6: ADDRCONF(NETDEV_CHANGE): veth3f3619d: link becomes ready
[   14.940082] hassio: port 2(veth3f3619d) entered blocking state
[   14.940092] hassio: port 2(veth3f3619d) entered forwarding state
[   17.702149] audit: type=1400 audit(1725375587.664:17): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="hassio-supervisor" pid=1355 comm="apparmor_parser"
[   17.702156] audit: type=1400 audit(1725375587.664:18): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="hassio-supervisor///usr/bin/gdbus" pid=1355 comm="apparmor_parser"
[   17.702158] audit: type=1400 audit(1725375587.664:19): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="hassio-supervisor///usr/bin/git" pid=1355 comm="apparmor_parser"
[   17.760505] FS-Cache: Loaded
[   17.761957] Key type dns_resolver registered
[   17.814958] Key type cifs.spnego registered
[   17.814964] Key type cifs.idmap registered
[   17.815287] CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount.
[   17.815290] CIFS: Attempting to mount \\192.168.1.1\CLOUD
[   18.446396] hassio: port 3(veth0cef596) entered blocking state
[   18.446404] hassio: port 3(veth0cef596) entered disabled state
[   18.446494] device veth0cef596 entered promiscuous mode
[   18.679232] eth0: renamed from veth1988c18
[   18.707625] IPv6: ADDRCONF(NETDEV_CHANGE): veth0cef596: link becomes ready
[   18.707798] hassio: port 3(veth0cef596) entered blocking state
[   18.707808] hassio: port 3(veth0cef596) entered forwarding state
[   19.180968] hassio: port 4(veth2739cfd) entered blocking state
[   19.180977] hassio: port 4(veth2739cfd) entered disabled state
[   19.181076] device veth2739cfd entered promiscuous mode
[   19.181224] hassio: port 4(veth2739cfd) entered blocking state
[   19.181229] hassio: port 4(veth2739cfd) entered forwarding state
[   19.419451] eth0: renamed from vethe66f734
[   19.439438] IPv6: ADDRCONF(NETDEV_CHANGE): veth2739cfd: link becomes ready
[   19.950765] hassio: port 5(veth7c3dd39) entered blocking state
[   19.950774] hassio: port 5(veth7c3dd39) entered disabled state
[   19.951135] device veth7c3dd39 entered promiscuous mode
[   20.202715] eth0: renamed from veth208352c
[   20.218905] IPv6: ADDRCONF(NETDEV_CHANGE): veth7c3dd39: link becomes ready
[   20.218971] hassio: port 5(veth7c3dd39) entered blocking state
[   20.218977] hassio: port 5(veth7c3dd39) entered forwarding state
[   20.521930] systemd-journald[250]: Time jumped backwards, rotating.
[   22.234368] hassio: port 6(veth613d5aa) entered blocking state
[   22.234379] hassio: port 6(veth613d5aa) entered disabled state
[   22.234521] device veth613d5aa entered promiscuous mode
[   22.491150] eth0: renamed from veth027fa4f
[   22.514699] IPv6: ADDRCONF(NETDEV_CHANGE): veth613d5aa: link becomes ready
[   22.514791] hassio: port 6(veth613d5aa) entered blocking state
[   22.514796] hassio: port 6(veth613d5aa) entered forwarding state
[   23.017657] hassio: port 7(vethbda882b) entered blocking state
[   23.017667] hassio: port 7(vethbda882b) entered disabled state
[   23.017786] device vethbda882b entered promiscuous mode
[   23.017990] hassio: port 7(vethbda882b) entered blocking state
[   23.017995] hassio: port 7(vethbda882b) entered forwarding state
[   23.233937] hassio: port 7(vethbda882b) entered disabled state
[   23.350909] eth0: renamed from veth2de24a5
[   23.366680] IPv6: ADDRCONF(NETDEV_CHANGE): vethbda882b: link becomes ready
[   23.366777] hassio: port 7(vethbda882b) entered blocking state
[   23.366781] hassio: port 7(vethbda882b) entered forwarding state
[   64.187049] new mount options do not match the existing superblock, will be ignored
[   68.301861] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   68.374119] Bluetooth: Core ver 2.22
[   68.374161] NET: Registered PF_BLUETOOTH protocol family
[   68.374162] Bluetooth: HCI device and connection manager initialized
[   68.374168] Bluetooth: HCI socket layer initialized
[   68.374171] Bluetooth: L2CAP socket layer initialized
[   68.374175] Bluetooth: SCO socket layer initialized
[   94.610316] hassio: port 8(veth6be1ed8) entered blocking state
[   94.610325] hassio: port 8(veth6be1ed8) entered disabled state
[   94.610681] device veth6be1ed8 entered promiscuous mode
[   94.893151] eth0: renamed from vethf90dd28
[   94.908150] IPv6: ADDRCONF(NETDEV_CHANGE): veth6be1ed8: link becomes ready
[   94.908208] hassio: port 8(veth6be1ed8) entered blocking state
[   94.908212] hassio: port 8(veth6be1ed8) entered forwarding state
[   95.316915] hassio: port 9(vethcc783a3) entered blocking state
[   95.316925] hassio: port 9(vethcc783a3) entered disabled state
[   95.317117] device vethcc783a3 entered promiscuous mode
[   95.317397] hassio: port 9(vethcc783a3) entered blocking state
[   95.317402] hassio: port 9(vethcc783a3) entered forwarding state
[   95.616287] eth0: renamed from veth3de07d3
[   95.640005] hassio: port 9(vethcc783a3) entered disabled state
[   95.644128] IPv6: ADDRCONF(NETDEV_CHANGE): vethcc783a3: link becomes ready
[   95.644275] hassio: port 9(vethcc783a3) entered blocking state
[   95.644282] hassio: port 9(vethcc783a3) entered forwarding state
[   96.176091] hassio: port 10(veth02b953c) entered blocking state
[   96.176107] hassio: port 10(veth02b953c) entered disabled state
[   96.176262] device veth02b953c entered promiscuous mode
[   96.176524] hassio: port 10(veth02b953c) entered blocking state
[   96.176531] hassio: port 10(veth02b953c) entered forwarding state
[   96.496060] eth0: renamed from vethc9b0cb6
[   96.524610] IPv6: ADDRCONF(NETDEV_CHANGE): veth02b953c: link becomes ready
[   96.998713] hassio: port 11(veth3ead5c4) entered blocking state
[   96.998718] hassio: port 11(veth3ead5c4) entered disabled state
[   96.999280] device veth3ead5c4 entered promiscuous mode
[   97.255936] eth0: renamed from vethb612c67
[   97.272003] IPv6: ADDRCONF(NETDEV_CHANGE): veth3ead5c4: link becomes ready
[   97.272051] hassio: port 11(veth3ead5c4) entered blocking state
[   97.272054] hassio: port 11(veth3ead5c4) entered forwarding state
[  103.669993] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  103.669998] Bluetooth: BNEP filters: protocol multicast
[  103.670003] Bluetooth: BNEP socket layer initialized
[  517.021835] CIFS: Attempting to mount \\192.168.1.1\CLOUD
[/code]

на 2 поделил первый вывод - не убирается

там 2 красных есть, может картинкой лучше?

Код Выделить Развернуть

root@debian:~# sudo rfkill list all
0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no


[Лия]

там 2 красных есть, может картинкой лучше?

Да не, и так норм

[    1.642806] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    1.770948] usb 1-8: device descriptor read/64, error -71
[    2.006951] usb 1-8: device descriptor read/64, error -71
[    2.242816] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    2.370948] usb 1-8: device descriptor read/64, error -71
[    2.606952] usb 1-8: device descriptor read/64, error -71
[    2.715061] usb usb1-port8: attempt power cycle
[    3.126801] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[    3.127063] usb 1-8: Device not responding to setup address.
[    3.335044] usb 1-8: Device not responding to setup address.
[    3.542799] usb 1-8: device not accepting address 6, error -71
[    3.670807] usb 1-8: new full-speed USB device number 7 using xhci_hcd
[    3.671066] usb 1-8: Device not responding to setup address.
[    3.879048] usb 1-8: Device not responding to setup address.
[    4.086792] usb 1-8: device not accepting address 7, error -71
[    4.087068] usb usb1-port8: unable to enumerate USB device

Вот это меня конечно сильно смущает
Либо аппаратная проблема, либо ядро не ядрячит

Попробуем поставить ядро из бэкпортов

Код Выделить Развернуть

deb http://deb.debian.org/debian bookworm-backports main contrib non-free
добавляем в /etc/apt/sources.list, если ещё не добавлено
затем

Код Выделить Развернуть

sudo apt update
sudo apt install -t bookworm-backports linux-image-amd64 linux-headers-amd64
Перезагрузиться и затем

Код Выделить Развернуть

sudo dmesg 2>&1 | grep -iE 'blue|usb'


[Aalexeey]

https://debianforum.ru/index.php?msg=138006 если их бэкпортов не поможет.

[ops244]

с этим ядром заработал))

Код Выделить Развернуть

root@debian:~# sudo dmesg 2>&1 | grep -iE 'blue|usb'
[    0.018009] ACPI: SSDT 0x000000007367A000 001918 (v02 ALASKA UsbCTabl 00001000 INTL 20200717)
[    1.008583] ACPI: bus type USB registered
[    1.008614] usbcore: registered new interface driver usbfs
[    1.008623] usbcore: registered new interface driver hub
[    1.008634] usbcore: registered new device driver usb
[    1.033095] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.034534] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.034537] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.034577] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    1.034580] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.034581] usb usb1: Product: xHCI Host Controller
[    1.034582] usb usb1: Manufacturer: Linux 6.10.6+bpo-amd64 xhci-hcd
[    1.034584] usb usb1: SerialNumber: 0000:00:14.0
[    1.034777] hub 1-0:1.0: USB hub found
[    1.036506] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
[    1.036509] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.036511] usb usb2: Product: xHCI Host Controller
[    1.036512] usb usb2: Manufacturer: Linux 6.10.6+bpo-amd64 xhci-hcd
[    1.036513] usb usb2: SerialNumber: 0000:00:14.0
[    1.036596] hub 2-0:1.0: USB hub found
[    1.290927] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.444272] usb 1-4: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64
[    1.444278] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.444280] usb 1-4: Product: USB Serial
[    1.570776] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.720427] usb 1-6: New USB device found, idVendor=0573, idProduct=1573, bcdDevice=80.07
[    1.720434] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.720437] usb 1-6: Product: USB Audio and HID
[    1.720439] usb 1-6: Manufacturer: CSCTEK
[    1.720440] usb 1-6: SerialNumber: A34004801402
[    1.846761] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    1.975498] usb 1-8: device descriptor read/64, error -71
[    2.212655] usb 1-8: device descriptor read/64, error -71
[    2.450884] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    2.582785] usb 1-8: device descriptor read/64, error -71
[    2.818777] usb 1-8: device descriptor read/64, error -71
[    2.926850] usb usb1-port8: attempt power cycle
[    3.406766] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[    3.407655] usb 1-8: Device not responding to setup address.
[    3.622749] usb 1-8: Device not responding to setup address.
[    3.830750] usb 1-8: device not accepting address 6, error -71
[    3.830808] usb 1-8: WARN: invalid context state for evaluate context command.
[    3.958763] usb 1-8: new full-speed USB device number 7 using xhci_hcd
[    3.959004] usb 1-8: Device not responding to setup address.
[    4.169039] usb 1-8: Device not responding to setup address.
[    4.374748] usb 1-8: device not accepting address 7, error -71
[    4.374806] usb 1-8: WARN: invalid context state for evaluate context command.
[    4.374854] usb usb1-port8: unable to enumerate USB device
[    4.398616] usbcore: registered new interface driver usbserial_generic
[    4.398640] usbserial: USB Serial support registered for generic
[    4.405503] usbcore: registered new interface driver ch341
[    4.405530] usbserial: USB Serial support registered for ch341-uart
[    4.406762] usb 1-4: ch341-uart converter now attached to ttyUSB0
[    4.426469] usbhid 1-6:1.3: couldn't find an input interrupt endpoint
[    4.426527] usbcore: registered new interface driver usbhid
[    4.426530] usbhid: USB HID core driver
[    4.459612] usb 1-6: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
[    4.459617] usb 1-6: [5] FU [Mic Capture Volume] ch = 1, val = -8192/-1/16
[    4.461758] usb 1-6: Warning! Unlikely big volume range (=896), cval->res is probably wrong.
[    4.461762] usb 1-6: [6] FU [PCM Playback Volume] ch = 2, val = -16384/-2048/16
[    4.461915] usbcore: registered new interface driver snd-usb-audio
[    4.726773] usb 1-8: new full-speed USB device number 8 using xhci_hcd
[    4.876548] usb 1-8: New USB device found, idVendor=0bda, idProduct=c821, bcdDevice= 1.10
[    4.876568] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.876574] usb 1-8: Product: Bluetooth Radio
[    4.876579] usb 1-8: Manufacturer: Realtek
[    4.876583] usb 1-8: SerialNumber: 00e04c000001
[    4.954107] Bluetooth: Core ver 2.22
[    4.954143] NET: Registered PF_BLUETOOTH protocol family
[    4.954144] Bluetooth: HCI device and connection manager initialized
[    4.954148] Bluetooth: HCI socket layer initialized
[    4.954150] Bluetooth: L2CAP socket layer initialized
[    4.954159] Bluetooth: SCO socket layer initialized
[    4.971093] usbcore: registered new interface driver btusb
[    4.973675] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
[    4.974624] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    4.974629] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
[    4.975769] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
[    4.975980] Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
[    5.058630] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.058637] Bluetooth: BNEP filters: protocol multicast
[    5.058643] Bluetooth: BNEP socket layer initialized
[    5.439968] Bluetooth: hci0: RTL: fw version 0x75b8f098
[    5.505284] Bluetooth: MGMT ver 1.22
[  20.124660] Bluetooth: RFCOMM TTY layer initialized
[  20.124673] Bluetooth: RFCOMM socket layer initialized
[  20.124685] Bluetooth: RFCOMM ver 1.11


[Лия]

https://debianforum.ru/index.php?msg=138006 если их бэкпортов не поможет.

Так сейчас в бэкпортах самое новое ядро, новее только mainline
Да и вряд ли в

Liquorix is an enthusiast Linux kernel designed for uncompromised responsiveness in interactive systems, enabling low latency compute in A/V production, and reduced frame time deviations in games.

Major Features

    Zen Interactive Tuning: Tunes the kernel for responsiveness at the cost of throughput and power usage.
    PDS Process Scheduler: Fair process scheduler for gaming, multimedia, and real-time loads.
    High Resolution Scheduling: 1000hz tick rate for precise low jitter task scheduling.
    Preemptible tree-based hierarchical RCU: RCU implementation for real-time systems.
    Hard Kernel Preemption: Most aggressive kernel preemption before requiring real-time patches. Guarantees responsive system under high intensity mixed workload scenarios.
    Budget Fair Queue: Proper disk scheduler optimized for desktop usage, high throughput / low latency.
    TCP BBR2 Congestion Control: Fast congestion control, maximizes throughput, guaranteeing higher speeds than Cubic.
    Compressed Swap: Swap storage is compressed with LZ4 using zswap
    Multigenerational LRU: Alternative LRU algorithm that performs better under high memory pressure and uptimes
    Binary Builds For Popular Debian Distros: Binary builds are produced for Debian Stable, Testing, and Unstable. Ubuntu builds are available on the Liquorix PPA same day within hours of Debian releases going up.
    Distribution Kernel Drop-in Replacement: Proper distribution style configuration supporting broadest selection of hardware. Paravirtualization options enabled to reduce overhead under virtualization.

делают что-то, что связано с драйверами

[ops244]

спасибо вам большое, все так оставлять, да?

[Лия]

спасибо вам большое, все так оставлять, да?

Да

03 сентября 2024, 18:41:31
Можете периодически обновлять ядро той же командой:

Код Выделить Развернуть

sudo apt install -t bookworm-backports linux-image-amd64 linux-headers-amd64
но это уже по вкусу

[ek-nfn]

https://debianforum.ru/index.php?msg=138006 если их бэкпортов не поможет.

Я пробовал ихнее ядро 6.10. Почему-то при установке мх-линукс мне добавил к нему и ядро 6.9, видимо для подстраховки. Через пару дней вернулся на 6.1, так как машинка стала подвисать при выходе из ждущего режима

[ogost]

Граммарнаци

Их

[свернуть]

[Aalexeey]

Так сейчас в бэкпортах самое новое ядро, новее только mainline

Дело не в том насколько оно новое, а в том как вовремя его пропатчили, дебиан это делает очень сильно с опозданием, даже когда уже все это сделали. Кроме того дебиановцы вносят дебиано патчи которые очень часто комуто ломают стабильность или из за них система вдруг, после определённых дебиано патчей, перестаёт грузиться. У меня например с 5го дебиано ядра не запускаются машины на Ivy Bridge, со сторонними всё нормально, использую из Antix.
С нужным патчем ядро может заработать и не будучи новым.
C ядрами не родной версии может не устанавливаться например VirtualBox в .deb пакетах с их оф сайта, тк его dkms не предполагает другого ядра не соответвтвуюшего релизу. По этой причине, например если родное ядро 5.10... то я ставил тот же релиз например 5.10.188-antix

[Лия]

У меня например с 5го дебиано ядра не запускаются машины на Ivy Bridge, со сторонними всё нормально, использую из Antix.

У меня на ноутбуке Core i7-3612QM, как раз Ivy Bridge
Всё работает
Ядро 6.1
intel-microcode установлен

А поподробнее? Что значит не запускаются? Картинку на экран не выдают? Или ядро ошибками сыпет?