Debian 12 не работает Touchpad на Lenovo Thinkbook

Автор x1Debian, 11 апреля 2025, 17:30:20

« назад - далее »

0 Пользователи и 1 гость просматривают эту тему.

ChubaDuba

Цитата: x1Debian от 12 апреля 2025, 20:20:25Спасибо за ссылку, буду изучать. Вы не в курсе ядро с патчем проблемы от Ubuntu можно использовать в Debian или нет?
А он есть этот патч? Я так понимаю что проблема всё ещё не решена. Попробуйте последнюю Ubuntu для точности.

x1Debian

#16
Цитата: Лия от 12 апреля 2025, 19:30:36А lspci покажите, может оно там висит
$ lspci
00:00.0 Host bridge: Intel Corporation Device 7d01 (rev 04)
00:01.0 PCI bridge: Intel Corporation Device 7ecc (rev 10)
00:02.0 VGA compatible controller: Intel Corporation Meteor Lake-P [Intel Arc Graphics] (rev 08)
00:04.0 Signal processing controller: Intel Corporation Meteor Lake-P Dynamic Tuning Technology (rev 04)
00:06.0 PCI bridge: Intel Corporation Device 7e4d (rev 20)
00:06.2 PCI bridge: Intel Corporation Device 7ecb (rev 10)
00:07.0 PCI bridge: Intel Corporation Meteor Lake-P Thunderbolt 4 PCI Express Root Port #2 (rev 10)
00:0a.0 Signal processing controller: Intel Corporation Meteor Lake-P Platform Monitoring Technology (rev 01)
00:0b.0 Processing accelerators: Intel Corporation Meteor Lake NPU (rev 04)
00:0d.0 USB controller: Intel Corporation Meteor Lake-P Thunderbolt 4 USB Controller (rev 10)
00:0d.3 USB controller: Intel Corporation Meteor Lake-P Thunderbolt 4 NHI #1 (rev 10)
00:12.0 Serial controller: Intel Corporation Meteor Lake-P Integrated Sensor Hub (rev 20)
00:14.0 USB controller: Intel Corporation Meteor Lake-P USB 3.2 Gen 2x1 xHCI Host Controller (rev 20)
00:14.2 RAM memory: Intel Corporation Device 7e7f (rev 20)
00:14.3 Network controller: Intel Corporation Meteor Lake PCH CNVi WiFi (rev 20)
00:15.0 Serial bus controller: Intel Corporation Meteor Lake-P Serial IO I2C Controller #0 (rev 20)
00:15.2 Serial bus controller: Intel Corporation Meteor Lake-P Serial IO I2C Controller #2 (rev 20)
00:15.3 Serial bus controller: Intel Corporation Meteor Lake-P Serial IO I2C Controller #3 (rev 20)
00:16.0 Communication controller: Intel Corporation Meteor Lake-P CSME HECI (rev 20)
00:19.0 Serial bus controller: Intel Corporation Meteor Lake-P Serial IO I2C Controller #4 (rev 20)
00:19.1 Serial bus controller: Intel Corporation Meteor Lake-P Serial IO I2C Controller #5 (rev 20)
00:1c.0 PCI bridge: Intel Corporation Device 7e39 (rev 20)
00:1f.0 ISA bridge: Intel Corporation Device 7e02 (rev 20)
00:1f.3 Multimedia audio controller: Intel Corporation Meteor Lake-P HD Audio Controller (rev 20)
00:1f.4 SMBus: Intel Corporation Meteor Lake-P SMBus Controller (rev 20)
00:1f.5 Serial bus controller: Intel Corporation Meteor Lake-P SPI Controller (rev 20)
00:1f.6 Ethernet controller: Intel Corporation Device 550b (rev 20)
01:00.0 Non-Volatile memory controller: Micron Technology Inc 2550 NVMe SSD (DRAM-less) (rev 01)
07:00.0 Non-Volatile memory controller: Sandisk Corp WD PC SN740 NVMe SSD 512GB (DRAM-less) (rev 01)
32:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)

yoric

#17
Нету, да и навряд ли. Для полного счастья lsusb

x1Debian

#18
Цитата: ChubaDuba от 12 апреля 2025, 20:24:10
Цитата: x1Debian от 12 апреля 2025, 20:20:25Спасибо за ссылку, буду изучать. Вы не в курсе ядро с патчем проблемы от Ubuntu можно использовать в Debian или нет?
А он есть этот патч? Я так понимаю что проблема всё ещё не решена. Попробуйте последнюю Ubuntu для точности.
Для начала хочу попробовать доп. настройка GRUB, но боюсь в очередной раз загробить его, что, в моем случае, приводило уже пару раз к переустановке системы.
1. Я правильно понимаю, что могу сделать резевреную копию файлов конфиграцию GRUB и хранить эту копию на Live-Flash, а потом оперативно возвращать на место?
2.Где можно почитать про настройку Grub в Debian 12 по аналогии с тем, как это написано для Ubuntu (https://help.ubuntu.ru/wiki/grub#%D0%B8%D0%B7%D0%BC%D0%B5%D0%BD%D0%B5%D0%BD%D0%B8%D0%B5_%D1%81%D1%82%D0%B0%D0%BD%D0%B4%D0%B0%D1%80%D1%82%D0%BD%D1%8B%D1%85_%D0%BF%D0%B0%D1%80%D0%B0%D0%BC%D0%B5%D1%82%D1%80%D0%BE%D0%B2_%D0%B7%D0%B0%D0%B3%D1%80%D1%83%D0%B7%D0%BA%D0%B8_%D1%8F%D0%B4%D1%80%D0%B0)?

Меня больше всего интересует GRUB_CMDLINE_LINUX_DEFAULT" и его параметры ro и quiet и что делает
параметр "i8042.nopnp=1 pci=nocrs".

12 апреля 2025, 22:48:18
Цитата: yoric от 12 апреля 2025, 22:36:04Нету, да и навряд ли. Для полного счастья lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 006: ID 17ef:f006 Lenovo Idea5003
Bus 003 Device 005: ID 30c9:00c2 Luxvisions Innotech Limited Integrated RGB Camera
Bus 003 Device 004: ID 10a5:d805 FPC FPC L:0004 FW:2127093
Bus 003 Device 003: ID 19d2:1405 ZTE WCDMA Technologies MSM ZTE Technologies MSM
Bus 003 Device 007: ID 8087:0033 Intel Corp. AX211 Bluetooth
Bus 003 Device 002: ID 4e53:5407  USB OPTICAL MOUSE
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


12 апреля 2025, 22:49:03
У меня через USB постоянно подключена оптическая мышь, чтобы я мог работать без Touchpad.

ChubaDuba

Ещё можно посмотреть лог Xorg (/var/log/Xorg.0.log). Что там коннектится, а потом отваливается.

RoDoN

Может быть стоит попробовать в live-режиме запустить MX Linux, а именно сборку MX-23.5_x64 "ahs" для нового железа?
Lenovo G500 (i5-3340M, 12 Гб, Intel + Radeon HD 8570)

dzhoser

ro — редко меняется вручную (обычно используется по умолчанию в initramfs).

quiet — для "тихой" загрузки (можно убрать для отладки).

i8042.nopnp=1 — если есть проблемы с PS/2-устройствами.

pci=nocrs — при ошибках PCI или зависаниях на этапе обнаружения железа.
Ubuntu->Linux mint->Astra Linux SE->Debian 12
Для новичков

x1Debian

#22
Цитата: RoDoN от 13 апреля 2025, 14:05:25Может быть стоит попробовать в live-режиме запустить MX Linux, а именно сборку MX-23.5_x64 "ahs" для нового железа?
Спасибо за рекомендацию, попробую и отпишусь здесь.

14 апреля 2025, 16:59:19
Цитата: ChubaDuba от 12 апреля 2025, 22:54:55Ещё можно посмотреть лог Xorg (/var/log/Xorg.0.log). Что там коннектится, а потом отваливается.
Цитата: ChubaDuba от 12 апреля 2025, 22:54:55Ещё можно посмотреть лог Xorg (/var/log/Xorg.0.log). Что там коннектится, а потом отваливается.

Выкладываю. Насколько я понимаю, он пытается инициализовать catchall (touchpad?).
[     3.421]
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[     3.421] Current Operating System: Linux x1n3 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64
[     3.421] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-32-amd64 root=UUID=5aefe788-fb66-4d0e-9b68-1d439fd2dc3d ro quiet
[     3.421] xorg-server 2:21.1.7-3+deb12u9 (https://www.debian.org/support)
[     3.421] Current version of pixman: 0.42.2
[     3.421] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[     3.421] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.421] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 14 13:48:03 2025
[     3.422] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.422] (==) No Layout section.  Using the first Screen section.
[     3.422] (==) No screen section available. Using defaults.
[     3.422] (**) |-->Screen "Default Screen Section" (0)
[     3.422] (**) |   |-->Monitor "<default monitor>"
[     3.422] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[     3.422] (==) Automatically adding devices
[     3.422] (==) Automatically enabling devices
[     3.422] (==) Automatically adding GPU devices
[     3.422] (==) Automatically binding GPU devices
[     3.422] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.423] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     3.423] Entry deleted from font path.
[     3.423] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[     3.423] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.423] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.423] (II) Loader magic: 0x55c340ceaf00
[     3.423] (II) Module ABI versions:
[     3.423] X.Org ANSI C Emulation: 0.4
[     3.423] X.Org Video Driver: 25.2
[     3.423] X.Org XInput driver : 24.4
[     3.423] X.Org Server Extension : 10.0
[     3.423] (++) using VT number 7

[     3.423] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.425] (--) PCI:*(0@0:2:0) 8086:7d55:17aa:384c rev 8, Mem @ 0x4818000000/16777216, 0x4000000000/268435456, BIOS @ 0x????????/131072
[     3.425] (II) LoadModule: "glx"
[     3.425] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.428] (II) Module glx: vendor="X.Org Foundation"
[     3.428] compiled for 1.21.1.7, module version = 1.0.0
[     3.428] ABI class: X.Org Server Extension, version 10.0
[     3.428] (==) Matched modesetting as autoconfigured driver 0
[     3.428] (==) Matched fbdev as autoconfigured driver 1
[     3.428] (==) Matched vesa as autoconfigured driver 2
[     3.428] (==) Assigned the driver to the xf86ConfigLayout
[     3.428] (II) LoadModule: "modesetting"
[     3.428] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.428] (II) Module modesetting: vendor="X.Org Foundation"
[     3.428] compiled for 1.21.1.7, module version = 1.21.1
[     3.428] Module class: X.Org Video Driver
[     3.428] ABI class: X.Org Video Driver, version 25.2
[     3.428] (II) LoadModule: "fbdev"
[     3.428] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     3.428] (II) Module fbdev: vendor="X.Org Foundation"
[     3.428] compiled for 1.21.1.3, module version = 0.5.0
[     3.428] Module class: X.Org Video Driver
[     3.428] ABI class: X.Org Video Driver, version 25.2
[     3.428] (II) LoadModule: "vesa"
[     3.428] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     3.429] (II) Module vesa: vendor="X.Org Foundation"
[     3.429] compiled for 1.21.1.3, module version = 2.5.0
[     3.429] Module class: X.Org Video Driver
[     3.429] ABI class: X.Org Video Driver, version 25.2
[     3.429] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.429] (II) FBDEV: driver for framebuffer: fbdev
[     3.429] (II) VESA: driver for VESA chipsets: vesa
[     3.431] (EE) open /dev/dri/card0: No such file or directory
[     3.431] (WW) Falling back to old probe method for modesetting
[     3.431] (EE) open /dev/dri/card0: No such file or directory
[     3.431] (II) Loading sub module "fbdevhw"
[     3.431] (II) LoadModule: "fbdevhw"
[     3.431] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     3.431] (II) Module fbdevhw: vendor="X.Org Foundation"
[     3.431] compiled for 1.21.1.7, module version = 0.0.2
[     3.431] ABI class: X.Org Video Driver, version 25.2
[     3.431] (EE) Unable to find a valid framebuffer device
[     3.431] (WW) Falling back to old probe method for fbdev
[     3.431] (II) Loading sub module "fbdevhw"
[     3.431] (II) LoadModule: "fbdevhw"
[     3.431] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     3.431] (II) Module fbdevhw: vendor="X.Org Foundation"
[     3.431] compiled for 1.21.1.7, module version = 0.0.2
[     3.431] ABI class: X.Org Video Driver, version 25.2
[     3.431] (II) FBDEV(2): using default device
[     3.431] vesa: Refusing to run on UEFI
[     3.431] (EE) Screen 0 deleted because of no matching config section.
[     3.431] (II) UnloadModule: "modesetting"
[     3.431] (EE) Screen 0 deleted because of no matching config section.
[     3.431] (II) UnloadModule: "fbdev"
[     3.431] (II) UnloadSubModule: "fbdevhw"
[     3.431] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[     3.431] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     3.431] (==) FBDEV(0): RGB weight 888
[     3.431] (==) FBDEV(0): Default visual is TrueColor
[     3.431] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.431] (II) FBDEV(0): hardware: EFI VGA (video memory: 23040kB)
[     3.431] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[     3.431] (II) FBDEV(0): checking modes against framebuffer device...
[     3.431] (II) FBDEV(0): checking modes against monitor...
[     3.431] (II) FBDEV(0): Virtual size is 3072x1920 (pitch 3072)
[     3.431] (**) FBDEV(0):  Built-in mode "current": 590.0 MHz, 175.6 kHz, 90.3 Hz
[     3.431] (II) FBDEV(0): Modeline "current"x0.0  589.97  3072 3104 3232 3360  1920 1924 1928 1944 -hsync -vsync -csync (175.6 kHz b)
[     3.431] (==) FBDEV(0): DPI set to (96, 96)
[     3.431] (II) Loading sub module "fb"
[     3.431] (II) LoadModule: "fb"
[     3.431] (II) Module "fb" already built-in
[     3.431] (**) FBDEV(0): using shadow framebuffer
[     3.431] (II) Loading sub module "shadow"
[     3.431] (II) LoadModule: "shadow"
[     3.431] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     3.432] (II) Module shadow: vendor="X.Org Foundation"
[     3.432] compiled for 1.21.1.7, module version = 1.1.0
[     3.432] ABI class: X.Org ANSI C Emulation, version 0.4
[     3.432] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[     3.433] (==) FBDEV(0): Backing store enabled
[     3.433] (==) FBDEV(0): DPMS enabled
[     3.433] (II) Initializing extension Generic Event Extension
[     3.433] (II) Initializing extension SHAPE
[     3.433] (II) Initializing extension MIT-SHM
[     3.433] (II) Initializing extension XInputExtension
[     3.433] (II) Initializing extension XTEST
[     3.433] (II) Initializing extension BIG-REQUESTS
[     3.433] (II) Initializing extension SYNC
[     3.434] (II) Initializing extension XKEYBOARD
[     3.434] (II) Initializing extension XC-MISC
[     3.434] (II) Initializing extension SECURITY
[     3.434] (II) Initializing extension XFIXES
[     3.434] (II) Initializing extension RENDER
[     3.434] (II) Initializing extension RANDR
[     3.434] (II) Initializing extension COMPOSITE
[     3.434] (II) Initializing extension DAMAGE
[     3.434] (II) Initializing extension MIT-SCREEN-SAVER
[     3.434] (II) Initializing extension DOUBLE-BUFFER
[     3.434] (II) Initializing extension RECORD
[     3.434] (II) Initializing extension DPMS
[     3.434] (II) Initializing extension Present
[     3.434] (II) Initializing extension DRI3
[     3.434] (II) Initializing extension X-Resource
[     3.434] (II) Initializing extension XVideo
[     3.434] (II) Initializing extension XVideo-MotionCompensation
[     3.435] (II) Initializing extension SELinux
[     3.435] (II) SELinux: Disabled on system
[     3.435] (II) Initializing extension GLX
[     3.435] (II) AIGLX: Screen 0 is not DRI2 capable
[     3.532] (II) IGLX: Loaded and initialized swrast
[     3.532] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     3.532] (II) Initializing extension XFree86-VidModeExtension
[     3.532] (II) Initializing extension XFree86-DGA
[     3.532] (II) Initializing extension XFree86-DRI
[     3.532] (II) Initializing extension DRI2
[     3.579] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     3.580] (II) No input driver specified, ignoring this device.
[     3.580] (II) This device may have been added with another device file.
[     3.580] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     3.580] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     3.580] (II) LoadModule: "libinput"
[     3.580] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     3.583] (II) Module libinput: vendor="X.Org Foundation"
[     3.583] compiled for 1.21.1.3, module version = 1.2.1
[     3.583] Module class: X.Org XInput Driver
[     3.583] ABI class: X.Org XInput driver, version 24.4
[     3.583] (II) Using input driver 'libinput' for 'Power Button'
[     3.583] (**) Power Button: always reports core events
[     3.583] (**) Option "Device" "/dev/input/event2"
[     3.587] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     3.587] (II) event2  - Power Button: device is a keyboard
[     3.587] (II) event2  - Power Button: device removed
[     3.628] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[     3.628] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     3.628] (**) Option "xkb_model" "pc105"
[     3.628] (**) Option "xkb_layout" "us,ru"
[     3.628] (**) Option "xkb_variant" ","
[     3.628] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[     3.649] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     3.650] (II) event2  - Power Button: device is a keyboard
[     3.651] (II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/event3)
[     3.651] (**) USB OPTICAL MOUSE : Applying InputClass "libinput pointer catchall"
[     3.651] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE '
[     3.651] (**) USB OPTICAL MOUSE : always reports core events
[     3.651] (**) Option "Device" "/dev/input/event3"
[     3.714] (II) event3  - USB OPTICAL MOUSE : is tagged by udev as: Mouse
[     3.714] (II) event3  - USB OPTICAL MOUSE : device is a pointer
[     3.714] (II) event3  - USB OPTICAL MOUSE : device removed
[     3.764] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:4E53:5407.0001/input/input3/event3"
[     3.764] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 7)
[     3.764] (**) Option "AccelerationScheme" "none"
[     3.764] (**) USB OPTICAL MOUSE : (accel) selected scheme none/0
[     3.764] (**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000
[     3.764] (**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4
[     3.826] (II) event3  - USB OPTICAL MOUSE : is tagged by udev as: Mouse
[     3.826] (II) event3  - USB OPTICAL MOUSE : device is a pointer
[     3.827] (II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/mouse0)
[     3.827] (II) No input driver specified, ignoring this device.
[     3.827] (II) This device may have been added with another device file.
[     3.828] (II) config/udev: Adding input device USB OPTICAL MOUSE  Keyboard (/dev/input/event4)
[     3.828] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "libinput keyboard catchall"
[     3.828] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE  Keyboard'
[     3.828] (**) USB OPTICAL MOUSE  Keyboard: always reports core events
[     3.828] (**) Option "Device" "/dev/input/event4"
[     3.830] (II) event4  - USB OPTICAL MOUSE  Keyboard: is tagged by udev as: Keyboard
[     3.830] (II) event4  - USB OPTICAL MOUSE  Keyboard: device is a keyboard
[     3.830] (II) event4  - USB OPTICAL MOUSE  Keyboard: device removed
[     3.856] (II) libinput: USB OPTICAL MOUSE  Keyboard: needs a virtual subdevice
[     3.856] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:4E53:5407.0002/input/input4/event4"
[     3.856] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Keyboard" (type: MOUSE, id 8)
[     3.856] (**) Option "AccelerationScheme" "none"
[     3.856] (**) USB OPTICAL MOUSE  Keyboard: (accel) selected scheme none/0
[     3.856] (**) USB OPTICAL MOUSE  Keyboard: (accel) acceleration factor: 2.000
[     3.856] (**) USB OPTICAL MOUSE  Keyboard: (accel) acceleration threshold: 4
[     3.857] (II) event4  - USB OPTICAL MOUSE  Keyboard: is tagged by udev as: Keyboard
[     3.857] (II) event4  - USB OPTICAL MOUSE  Keyboard: device is a keyboard
[     3.858] (II) config/udev: Adding input device Integrated RGB Camera: Integrat (/dev/input/event9)
[     3.858] (**) Integrated RGB Camera: Integrat: Applying InputClass "libinput keyboard catchall"
[     3.858] (II) Using input driver 'libinput' for 'Integrated RGB Camera: Integrat'
[     3.858] (**) Integrated RGB Camera: Integrat: always reports core events
[     3.858] (**) Option "Device" "/dev/input/event9"
[     3.859] (II) event9  - Integrated RGB Camera: Integrat: is tagged by udev as: Keyboard
[     3.859] (II) event9  - Integrated RGB Camera: Integrat: device is a keyboard
[     3.859] (II) event9  - Integrated RGB Camera: Integrat: device removed
[     3.916] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input10/event9"
[     3.916] (II) XINPUT: Adding extended input device "Integrated RGB Camera: Integrat" (type: KEYBOARD, id 9)
[     3.916] (**) Option "xkb_model" "pc105"
[     3.916] (**) Option "xkb_layout" "us,ru"
[     3.916] (**) Option "xkb_variant" ","
[     3.916] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[     3.917] (II) event9  - Integrated RGB Camera: Integrat: is tagged by udev as: Keyboard
[     3.917] (II) event9  - Integrated RGB Camera: Integrat: device is a keyboard
[     3.918] (II) config/udev: Adding input device Integrated RGB Camera: Integrat (/dev/input/event10)
[     3.918] (**) Integrated RGB Camera: Integrat: Applying InputClass "libinput keyboard catchall"
[     3.918] (II) Using input driver 'libinput' for 'Integrated RGB Camera: Integrat'
[     3.918] (**) Integrated RGB Camera: Integrat: always reports core events
[     3.918] (**) Option "Device" "/dev/input/event10"
[     3.919] (II) event10 - Integrated RGB Camera: Integrat: is tagged by udev as: Keyboard
[     3.919] (II) event10 - Integrated RGB Camera: Integrat: device is a keyboard
[     3.919] (II) event10 - Integrated RGB Camera: Integrat: device removed
[     3.948] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/input/input11/event10"
[     3.948] (II) XINPUT: Adding extended input device "Integrated RGB Camera: Integrat" (type: KEYBOARD, id 10)
[     3.948] (**) Option "xkb_model" "pc105"
[     3.948] (**) Option "xkb_layout" "us,ru"
[     3.948] (**) Option "xkb_variant" ","
[     3.948] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[     3.950] (II) event10 - Integrated RGB Camera: Integrat: is tagged by udev as: Keyboard
[     3.951] (II) event10 - Integrated RGB Camera: Integrat: device is a keyboard
[     3.952] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[     3.952] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[     3.952] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[     3.952] (**) Ideapad extra buttons: always reports core events
[     3.952] (**) Option "Device" "/dev/input/event8"
[     3.953] (II) event8  - Ideapad extra buttons: is tagged by udev as: Keyboard
[     3.953] (II) event8  - Ideapad extra buttons: device is a keyboard
[     3.953] (II) event8  - Ideapad extra buttons: device removed
[     4.020] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9/event8"
[     4.020] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 11)
[     4.020] (**) Option "xkb_model" "pc105"
[     4.020] (**) Option "xkb_layout" "us,ru"
[     4.020] (**) Option "xkb_variant" ","
[     4.020] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[     4.022] (II) event8  - Ideapad extra buttons: is tagged by udev as: Keyboard
[     4.022] (II) event8  - Ideapad extra buttons: device is a keyboard
[     4.023] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[     4.023] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     4.023] (II) Using input driver 'libinput' for 'Intel HID events'
[     4.023] (**) Intel HID events: always reports core events
[     4.023] (**) Option "Device" "/dev/input/event5"
[     4.024] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[     4.024] (II) event5  - Intel HID events: device is a keyboard
[     4.024] (II) event5  - Intel HID events: device removed
[     4.044] (**) Option "config_info" "udev:/sys/devices/platform/INTC1077:00/input/input6/event5"
[     4.044] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 12)
[     4.044] (**) Option "xkb_model" "pc105"
[     4.044] (**) Option "xkb_layout" "us,ru"
[     4.044] (**) Option "xkb_variant" ","
[     4.044] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[     4.045] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[     4.046] (II) event5  - Intel HID events: device is a keyboard
[     4.047] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event6)
[     4.047] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[     4.047] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[     4.047] (**) Intel HID 5 button array: always reports core events
[     4.047] (**) Option "Device" "/dev/input/event6"
[     4.048] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard
[     4.048] (II) event6  - Intel HID 5 button array: device is a keyboard
[     4.048] (II) event6  - Intel HID 5 button array: device removed
[     4.084] (**) Option "config_info" "udev:/sys/devices/platform/INTC1077:00/input/input7/event6"
[     4.084] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 13)
[     4.084] (**) Option "xkb_model" "pc105"
[     4.084] (**) Option "xkb_layout" "us,ru"
[     4.084] (**) Option "xkb_variant" ","
[     4.084] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[     4.086] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard
[     4.086] (II) event6  - Intel HID 5 button array: device is a keyboard
[     4.087] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     4.087] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     4.087] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     4.087] (**) AT Translated Set 2 keyboard: always reports core events
[     4.087] (**) Option "Device" "/dev/input/event0"
[     4.088] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.089] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     4.090] (II) event0  - AT Translated Set 2 keyboard: device removed
[     4.108] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     4.108] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[     4.108] (**) Option "xkb_model" "pc105"
[     4.108] (**) Option "xkb_layout" "us,ru"
[     4.108] (**) Option "xkb_variant" ","
[     4.108] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[     4.110] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.110] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     4.113] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     4.113] (II) No input driver specified, ignoring this device.
[     4.113] (II) This device may have been added with another device file.
[     4.121] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "libinput keyboard catchall"
[     4.121] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE  Keyboard'
[     4.121] (**) USB OPTICAL MOUSE  Keyboard: always reports core events
[     4.121] (**) Option "Device" "/dev/input/event4"
[     4.121] (II) libinput: USB OPTICAL MOUSE  Keyboard: is a virtual subdevice
[     4.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:4E53:5407.0002/input/input4/event4"
[     4.122] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Keyboard" (type: KEYBOARD, id 15)
[     4.122] (**) Option "xkb_model" "pc105"
[     4.122] (**) Option "xkb_layout" "us,ru"
[     4.122] (**) Option "xkb_variant" ","
[     4.122] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"

koshak83

Конституция СССР 1977 года.
Всесоюзный референдум о сохранении СССР 1991 года: Да- 76.4%, Нет- 21.7%, Признаны недействительными- 1.9%, Явка избирателей- 80.0%.