Автор Тема: IceWM периодически не реагирует на команды...  (Прочитано 3558 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн metaldemon

Доброго времени суток товарищи. :) Прошу сразу не пинать сильно, а объяснить или тыкнуть,  в каком направлении мне рыть.

А проблема моя состоит вот в чём. Установил DEBIAN 7.4, в конце установки в списке выбрал только систему, тоесть установилась только голая консоль, после чего были установлены X window system и IceWM, через несколько перезагрузок заметил странное поведение оконного менеджера. Дело в том, что после загрузки, IceWM мог выполнять одну и туже задачу (ну например после загрузки я нажимал сразу на значёк браузера он запускался и после этого при любое нажатие мыши вызывало запуск ещё одного браузера и ещё, стоит отметить, что клавиатура иногда работает при этом а иногда нет) всё это продолжается пока я не перезагружу IceWM... Поэтому вопрос, это глюк оболочки или может быть я что-то не так сделал? Если не так то что, тыкните пальцем... Всем заранее спасибо...
 

Оффлайн qupl

Re: IceWM периодически не реагирует на команды...
« Ответ #1 : 18 Февраля 2014, 15:37:29 »
Смотреть логи?

Оффлайн metaldemon

Re: IceWM периодически не реагирует на команды...
« Ответ #2 : 18 Февраля 2014, 18:08:14 »
Смотреть логи?
Подскажите где? Я сделаю скрины посмотрите.
 

Оффлайн qupl

Re: IceWM периодически не реагирует на команды...
« Ответ #3 : 18 Февраля 2014, 19:18:34 »
Все надо смотреть, какие есть.
Например, после глюка
dmesg | grep -ie error -ie fail
cat /var/log/Xorg.0.log

Оффлайн metaldemon

Re: IceWM периодически не реагирует на команды...
« Ответ #4 : 19 Февраля 2014, 11:18:57 »
Все надо смотреть, какие есть.
Например, после глюка
dmesg | grep -ie error -ie fail
cat /var/log/Xorg.0.log

Выполнил эти команды вот что получилось:

Spoiler: ShowHide

root@dimon:/home/metaldemon# dmesg | grep -ie error -ie fail
[    0.179541]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[   15.846240] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
root@dimon:/home/metaldemon# cat /var/log/Xorg.0.log
[  1268.062]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[  1268.062] X Protocol Version 11, Revision 0
[  1268.062] Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
[  1268.062] Current Operating System: Linux dimon 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64
[  1268.062] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=c6f0b352-5230-4ea4-a3d6-3fa92ef820a3 ro quiet
[  1268.062] Build Date: 17 December 2013  07:37:58PM
[  1268.063] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau@debian.org>)
[  1268.063] Current version of pixman: 0.26.0
[  1268.064]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[  1268.064] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1268.066] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 18 11:09:47 2014
[  1268.067] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1268.067] (==) No Layout section.  Using the first Screen section.
[  1268.067] (==) No screen section available. Using defaults.
[  1268.067] (**) |-->Screen "Default Screen Section" (0)
[  1268.067] (**) |   |-->Monitor "<default monitor>"
[  1268.067] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[  1268.067] (==) Automatically adding devices
[  1268.067] (==) Automatically enabling devices
[  1268.067] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1268.067]    Entry deleted from font path.
[  1268.067] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[  1268.067]    Entry deleted from font path.
[  1268.067] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[  1268.067] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1268.068] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1268.068] (II) Loader magic: 0x7f1f0bfccae0
[  1268.068] (II) Module ABI versions:
[  1268.068]    X.Org ANSI C Emulation: 0.4
[  1268.068]    X.Org Video Driver: 12.1
[  1268.068]    X.Org XInput driver : 16.0
[  1268.068]    X.Org Server Extension : 6.0
[  1268.068] (--) PCI:*(0:1:0:0) 10de:1245:0000:0000 rev 161, Mem @ 0x8c000000/33554432, 0x80000000/134217728, 0x88000000/67108864, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[  1268.068] (II) Open ACPI successful (/var/run/acpid.socket)
[  1268.068] (II) LoadModule: "extmod"
[  1268.069] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  1268.069] (II) Module extmod: vendor="X.Org Foundation"
[  1268.069]    compiled for 1.12.4, module version = 1.0.0
[  1268.069]    Module class: X.Org Server Extension
[  1268.069]    ABI class: X.Org Server Extension, version 6.0
[  1268.069] (II) Loading extension SELinux
[  1268.069] (II) Loading extension MIT-SCREEN-SAVER
[  1268.069] (II) Loading extension XFree86-VidModeExtension
[  1268.069] (II) Loading extension XFree86-DGA
[  1268.069] (II) Loading extension DPMS
[  1268.069] (II) Loading extension XVideo
[  1268.069] (II) Loading e[  1268.069] (II) Loading extension X-Resource
[  1268.069] (II) LoadModule: "dbe"
[  1268.070] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  1268.070] (II) Module dbe: vendor="X.Org Foundation"
[  1268.070]    compiled for 1.12.4, module version = 1.0.0
[  1268.070]    Module class: X.Org Server Extension
[  1268.070]    ABI class: X.Org Server Extension, version 6.0
[  1268.070] (II) Loading extension DOUBLE-BUFFER
[  1268.070] (II) LoadModule: "glx"
[  1268.070] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1268.070] (II) Module glx: vendor="X.Org Foundation"
[  1268.070]    compiled for 1.12.4, module version = 1.0.0
[  1268.070]    ABI class: X.Org Server Extension, version 6.0
[  1268.070] (==) AIGLX enabled
[  1268.070] (II) Loading extension GLX
[  1268.070] (II) LoadModule: "record"
[  1268.070] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  1268.070] (II) Module record: vendor="X.Org Foundation"
[  1268.070]    compiled for 1.12.4, module version = 1.13.0
[  1268.070]    Module class: X.Org Server Extension
[  1268.070]    ABI class: X.Org Server Extension, version 6.0
[  1268.070] (II) Loading extension RECORD
[  1268.070] (II) LoadModule: "dri"
[  1268.071] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  1268.071] (II) Module dri: vendor="X.Org Foundation"
[  1268.071]    compiled for 1.12.4, module version = 1.0.0
[  1268.071]    ABI class: X.Org Server Extension, version 6.0
[  1268.071] (II) Loading extension XFree86-DRI
[  1268.071] (II) LoadModule: "dri2"
[  1268.071] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1268.071] (II) Module dri2: vendor="X.Org Foundation"
[  1268.071]    compiled for 1.12.4, module version = 1.2.0
[  1268.071]    ABI class: X.Org Server Extension, version 6.0
[  1268.071] (II) Loading extension DRI2
[  1268.071] (==) Matched nouveau as autoconfigured driver 0
[  1268.071] (==) Matched nv as autoconfigured driver 1
[  1268.071] (==) Matched vesa as autoconfigured driver 2
[  1268.071] (==) Matched fbdev as autoconfigured driver 3
[  1268.071] (==) Assigned the driver to the xf86ConfigLayout
[  1268.071] (II) LoadModule: "nouveau"
[  1268.072] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[  1268.072] (II) Module nouveau: vendor="X.Org Foundation"
[  1268.072]    compiled for 1.12.4, module version = 1.0.1
[  1268.072]    Module class: X.Org Video Driver
[  1268.072]    ABI class: X.Org Video Driver, version 12.1
[  1268.072] (II) LoadModule: "nv"
[  1268.072] (WW) Warning, couldn't open module nv
[  1268.072] (II) UnloadModule: "nv"
[  1268.072] (II) Unloading nv
[  1268.072] (EE) Failed to load module "nv" (module does not exist, 0)
[  1268.072] (II) LoadModule: "vesa"
[  1268.072] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  1268.072] (II) Module vesa: vendor="X.Org Foundation"
[  1268.072]    compiled for 1.12.1, module version = 2.3.1
[  1268.072]    Module class: X.Org Video Driver
[  1268.072]    ABI class: X.Org Video Driver, version 12.0
[  1268.072] (II) LoadModule: "fbdev"
[  1268.072] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  1268.072] (II) Module fbdev: vendor="X.Org Foundation"
[  1268.072]    compiled for 1.12.1, module version = 0.4.2
[  1268.072]    ABI class: X.Org Video Driver, version 12.0
[  1268.072] (II) NOUVEAU driver Date:   Fri Jul 6 16:23:50 2012 +1000
[  1268.072] (II) NOUVEAU driver for NVIDIA chipset families :
[  1268.072]    RIVA TNT        (NV04)
[  1268.072]    RIVA TNT2       (NV05)
[  1268.072]    GeForce 256     (NV10)
[  1268.073]    GeForce 2       (NV11, NV15)
[  1268.073]    GeForce 4MX     (NV17, NV18)
[  1268.073]    GeForce 3       (NV20)
[  1268.073]    GeForce 4Ti     (NV25, NV28)xtension XVideo-MotionCompensation
[  1268.073]    GeForce FX      (NV3x)
[  1268.073]    GeForce 6       (NV4x)
[  1268.073]    GeForce 7       (G7x)
[  1268.073]    GeForce 8       (G8x)
[  1268.073]    GeForce GTX 200 (NVA0)
[  1268.073]    GeForce GTX 400 (NVC0)
[  1268.073] (II) VESA: driver for VESA chipsets: vesa
[  1268.073] (II) FBDEV: driver for framebuffer: fbdev
[  1268.073] (--) using VT number 7

[  1268.074] drmOpenDevice: node name is /dev/dri/card0
[  1268.074] drmOpenDevice: open result is 8, (OK)
[  1268.074] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  1268.074] drmOpenDevice: node name is /dev/dri/card0
[  1268.074] drmOpenDevice: open result is 8, (OK)
[  1268.074] drmOpenByBusid: drmOpenMinor returns 8
[  1268.074] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  1268.074] (II) [drm] nouveau interface version: 1.0.0
[  1268.074] (WW) Falling back to old probe method for vesa
[  1268.075] (WW) Falling back to old probe method for fbdev
[  1268.075] (II) Loading sub module "fbdevhw"
[  1268.075] (II) LoadModule: "fbdevhw"
[  1268.075] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  1268.075] (II) Module fbdevhw: vendor="X.Org Foundation"
[  1268.075]    compiled for 1.12.4, module version = 0.0.2
[  1268.075]    ABI class: X.Org Video Driver, version 12.1
[  1268.075] (II) Loading sub module "dri"
[  1268.075] (II) LoadModule: "dri"
[  1268.075] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  1268.075] (II) Module dri: vendor="X.Org Foundation"
[  1268.075]    compiled for 1.12.4, module version = 1.0.0
[  1268.075]    ABI class: X.Org Server Extension, version 6.0
[  1268.075] (II) NOUVEAU(0): Loaded DRI module
[  1268.075] drmOpenDevice: node name is /dev/dri/card0
[  1268.075] drmOpenDevice: open result is 9, (OK)
[  1268.075] drmOpenDevice: node name is /dev/dri/card0
[  1268.075] drmOpenDevice: open result is 9, (OK)
[  1268.075] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  1268.075] drmOpenDevice: node name is /dev/dri/card0
[  1268.075] drmOpenDevice: open result is 9, (OK)
[  1268.075] drmOpenByBusid: drmOpenMinor returns 9
[  1268.075] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  1268.075] (II) [drm] DRM interface version 1.4
[  1268.075] (II) [drm] DRM open master succeeded.
[  1268.075] (--) NOUVEAU(0): Chipset: "NVIDIA NVcf"
[  1268.075] (II) NOUVEAU(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[  1268.075] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[  1268.075] (==) NOUVEAU(0): RGB weight 888
[  1268.075] (==) NOUVEAU(0): Default visual is TrueColor
[  1268.075] (==) NOUVEAU(0): Using HW cursor
[  1268.075] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[  1268.075] (==) NOUVEAU(0): Page flipping enabled
[  1268.075] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[  1268.106] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[  1268.108] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[  1268.137] (II) NOUVEAU(0): EDID for output DVI-I-1
[  1268.137] (II) NOUVEAU(0): Manufacturer: GSM  Model: 4383  Serial#: 272284
[  1268.137] (II) NOUVEAU(0): Year: 2004  Week: 9
[  1268.137] (II) NOUVEAU(0): EDID Version: 1.3
[  1268.137] (II) NOUVEAU(0): Digital Display Input
[  1268.137] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[  1268.137] (II) NOUVEAU(0): Gamma: 2.20
[  1268.137] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[  1268.137] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[  1268.137] (II) NOUVEAU(0): First detailed timing is preferred mode
[  1268.137] (II) NOUVEAU(0): redX: 0.641 redY: 0.342   greenX: 0.292 greenY: 0.611
[  1268.137] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.068   whiteX: 0.313 whiteY:
0.329
[  1268.137] (II) NOUVEAU(0): Supported established timings:
[  1268.137] (II) NOUVEAU(0): 720x400@70Hz
[  1268.137] (II) NOUVEAU(0): 640x480@60Hz
[  1268.137] (II) NOUVEAU(0): 640x480@75Hz
[  1268.137] (II) NOUVEAU(0): 800x600@60Hz
[  1268.137] (II) NOUVEAU(0): 800x600@75Hz
[  1268.138] (II) NOUVEAU(0): 832x624@75Hz
[  1268.138] (II) NOUVEAU(0): 1024x768@60Hz
[  1268.138] (II) NOUVEAU(0): 1024x768@75Hz
[  1268.138] (II) NOUVEAU(0): 1152x864@75Hz
[  1268.138] (II) NOUVEAU(0): Manufacturer's mask: 0
[  1268.138] (II) NOUVEAU(0): Supported standard timings:
[  1268.138] (II) NOUVEAU(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
[  1268.138] (II) NOUVEAU(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
[  1268.138] (II) NOUVEAU(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
[  1268.138] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  1268.138] (II) NOUVEAU(0): Supported detailed timing:
[  1268.138] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[  1268.138] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[  1268.138] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[  1268.138] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 71 kHz, PixClock max 115 MHz
[  1268.138] (II) NOUVEAU(0): Monitor name: L1720P
[  1268.138] (II) NOUVEAU(0): Monitor name:
[  1268.138] (II) NOUVEAU(0): EDID (in hex):
[  1268.138] (II) NOUVEAU(0):   00ffffffffffff001e6d83439c270400
[  1268.138] (II) NOUVEAU(0):   090e0103ee221b78ea2ee5a4574a9c25
[  1268.138] (II) NOUVEAU(0):   115054a56a80314f454f614f81800101
[  1268.138] (II) NOUVEAU(0):   010101010101302a009851002a403070
[  1268.138] (II) NOUVEAU(0):   1300520e1100001e000000fd00384b1e
[  1268.138] (II) NOUVEAU(0):   470b000a202020202020000000fc004c
[  1268.138] (II) NOUVEAU(0):   31373230500a202020202020000000fc
[  1268.138] (II) NOUVEAU(0):   00200a202020202020202020202000c1
[  1268.138] (II) NOUVEAU(0): EDID vendor "GSM", prod id 17283
[  1268.138] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[  1268.138] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[  1268.138] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  1268.138] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[  1268.138] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  1268.138] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[  1268.138] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[  1268.138] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1
312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1268.138] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  1268.140] (II) NOUVEAU(0): EDID for output HDMI-1
[  1268.140] (II) NOUVEAU(0): Output DVI-I-1 connected
[  1268.140] (II) NOUVEAU(0): Output HDMI-1 disconnected
[  1268.140] (II) NOUVEAU(0): Using exact sizes for initial modes
[  1268.140] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x1024
[  1268.140] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1268.140] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[  1268.140] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[  1268.140] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  1268.140] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[  1268.140] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  1268.140] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1268.140] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  1268.140] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  1268.140] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1268.140] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  1268.140] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1268.140] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[  1268.140] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  1268.140] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
[  1268.140] (**) NOUVEAU(0): DPI set to (95, 96)
[  1268.140] (II) Lo[  1268.140] (II) LoadModule: "fb"
[  1268.140] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1268.140] (II) Module fb: vendor="X.Org Foundation"
[  1268.140]    compiled for 1.12.4, module version = 1.0.0
[  1268.140]    ABI class: X.Org ANSI C Emulation, version 0.4
[  1268.140] (II) Loading sub module "exa"
[  1268.140] (II) LoadModule: "exa"
[  1268.141] (II) Loading /usr/lib/xorg/modules/libexa.so
[  1268.141] (II) Module exa: vendor="X.Org Foundation"
[  1268.141]    compiled for 1.12.4, module version = 2.5.0
[  1268.141]    ABI class: X.Org Video Driver, version 12.1
[  1268.141] (II) Loading sub module "shadowfb"
[  1268.141] (II) LoadModule: "shadowfb"
[  1268.141] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[  1268.141] (II) Module shadowfb: vendor="X.Org Foundation"
[  1268.141]    compiled for 1.12.4, module version = 1.0.0
[  1268.141]    ABI class: X.Org ANSI C Emulation, version 0.4
[  1268.141] (II) UnloadModule: "vesa"
[  1268.141] (II) Unloading vesa
[  1268.141] (II) UnloadModule: "fbdev"
[  1268.141] (II) Unloading fbdev
[  1268.141] (II) UnloadSubModule: "fbdevhw"
[  1268.141] (II) Unloading fbdevhw
[  1268.141] (--) Depth 24 pixmap format is 32 bpp
[  1268.142] (II) NOUVEAU(0): Opened GPU channel 1
[  1268.144] (II) NOUVEAU(0): [DRI2] Setup complete
[  1268.144] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[  1268.144] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[  1268.144] (II) EXA(0): Driver allocated offscreen pixmaps
[  1268.144] (II) EXA(0): Driver registered support for the following operations:
[  1268.144] (II)         Solid
[  1268.144] (II)         Copy
[  1268.144] (II)         Composite (RENDER acceleration)
[  1268.144] (II)         UploadToScreen
[  1268.144] (II)         DownloadFromScreen
[  1268.144] (==) NOUVEAU(0): Backing store disabled
[  1268.144] (==) NOUVEAU(0): Silken mouse enabled
[  1268.144] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[  1268.144] (II) NOUVEAU(0): [XvMC] Extension initialized.
[  1268.144] (==) NOUVEAU(0): DPMS enabled
[  1268.144] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1268.144] (--) RandR disabled
[  1268.144] (II) Initializing built-in extension Generic Event Extension
[  1268.144] (II) Initializing built-in extension SHAPE
[  1268.144] (II) Initializing built-in extension MIT-SHM
[  1268.144] (II) Initializing built-in extension XInputExtension
[  1268.144] (II) Initializing built-in extension XTEST
[  1268.144] (II) Initializing built-in extension BIG-REQUESTS
[  1268.144] (II) Initializing built-in extension SYNC
[  1268.144] (II) Initializing built-in extension XKEYBOARD
[  1268.144] (II) Initializing built-in extension XC-MISC
[  1268.144] (II) Initializing built-in extension SECURITY
[  1268.144] (II) Initializing built-in extension XINERAMA
[  1268.144] (II) Initializing built-in extension XFIXES
[  1268.144] (II) Initializing built-in extension RENDER
[  1268.144] (II) Initializing built-in extension RANDR
[  1268.144] (II) Initializing built-in extension COMPOSITE
[  1268.144] (II) Initializing built-in extension DAMAGE
[  1268.144] (II) SELinux: Disabled on system
[  1268.157] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1268.157] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1268.157] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  1268.157] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1268.158] (II) AIGLX: Loaded and initialized nouveau
[  1268.158] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1268.161] (II) NOUVEAU(0): NVEnterVT is called.
[  1268.172] (II) NOUVEAU(0): Setting screen physical size to 338 x 270ading sub module "fb"
[  1268.172] resize called 1280 1024
[  1268.204] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[  1268.204] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1268.204] (II) LoadModule: "evdev"
[  1268.204] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1268.204] (II) Module evdev: vendor="X.Org Foundation"
[  1268.204]    compiled for 1.12.1, module version = 2.7.0
[  1268.204]    Module class: X.Org XInput Driver
[  1268.204]    ABI class: X.Org XInput driver, version 16.0
[  1268.204] (II) Using input driver 'evdev' for 'Power Button'
[  1268.204] (**) Power Button: always reports core events
[  1268.204] (**) evdev: Power Button: Device: "/dev/input/event7"
[  1268.204] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1268.204] (--) evdev: Power Button: Found keys
[  1268.204] (II) evdev: Power Button: Configuring as keyboard
[  1268.204] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[  1268.204] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1268.204] (**) Option "xkb_rules" "evdev"
[  1268.204] (**) Option "xkb_model" "pc105"
[  1268.204] (**) Option "xkb_layout" "us,ru"
[  1268.204] (**) Option "xkb_variant" ","
[  1268.204] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  1268.225] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[  1268.225] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1268.225] (II) Using input driver 'evdev' for 'Sleep Button'
[  1268.225] (**) Sleep Button: always reports core events
[  1268.225] (**) evdev: Sleep Button: Device: "/dev/input/event6"
[  1268.225] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  1268.225] (--) evdev: Sleep Button: Found keys
[  1268.225] (II) evdev: Sleep Button: Configuring as keyboard
[  1268.225] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event6"
[  1268.225] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[  1268.225] (**) Option "xkb_rules" "evdev"
[  1268.225] (**) Option "xkb_model" "pc105"
[  1268.225] (**) Option "xkb_layout" "us,ru"
[  1268.225] (**) Option "xkb_variant" ","
[  1268.225] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  1268.225] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[  1268.225] (II) No input driver specified, ignoring this device.
[  1268.225] (II) This device may have been added with another device file.
[  1268.225] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[  1268.225] (II) No input driver specified, ignoring this device.
[  1268.225] (II) This device may have been added with another device file.
[  1268.226] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[  1268.226] (II) No input driver specified, ignoring this device.
[  1268.226] (II) This device may have been added with another device file.
[  1268.226] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19)
[  1268.226] (II) No input driver specified, ignoring this device.
[  1268.226] (II) This device may have been added with another device file.
[  1268.226] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T.7 Con
tagion Mouse (/dev/input/event0)
[  1268.226] (**) Mad Catz Mad Catz R.A.T.7 Contagion Mouse: Applying InputClass "evdev pointer catchall"
[  1268.226] (II) Using input driver 'evdev' for 'Mad Catz Mad Catz R.A.T.7 Contagion Mouse'
[  1268.226] (**) Mad Catz Mad Catz R.A.T.7 Contagion Mouse: always reports core events
[  1268.226] (**) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: Device: "/dev/input/event0"
[  1268.226] (--) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: Vendor 0x738 Product 0x1708
[  1268.226] (--) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: Found 17 mouse buttons
[  1268.226] (--) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: Found scroll wheel(s)
[  1268.226] (--) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: Found relative axes
[  1268.226] (--) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: Found x and y relative axes
[  1268.226] (II) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: Configuring as mouse
[  1268.226] (II) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: Adding scrollwheel support
[  1268.226] (**) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: YAxisMapping: buttons 4 and 5
[  1268.226] (**) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1268.226] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input0/event0"
[  1268.226] (II) XINPUT: Adding extended input device "Mad Catz Mad Catz R.A.T.7 Contagion Mouse" (type: MOUSE, id 8)
[  1268.226] (II) evdev: Mad Catz Mad Catz R.A.T.7 Contagion Mouse: initialized for relative axes.
[  1268.227] (**) Mad Catz Mad Catz R.A.T.7 Contagion Mouse: (accel) keeping acceleration scheme 1
[  1268.227] (**) Mad Catz Mad Catz R.A.T.7 Contagion Mouse: (accel) acceleration profile 0
[  1268.227] (**) Mad Catz Mad Catz R.A.T.7 Contagion Mouse: (accel) acceleration factor: 2.000
[  1268.227] (**) Mad Catz Mad Catz R.A.T.7 Contagion Mouse: (accel) acceleration threshold: 4
[  1268.227] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T.7 Contagion Mouse (/dev/input/mouse0)
[  1268.227] (II) No input driver specified, ignoring this device.
[  1268.227] (II) This device may have been added with another device file.
[  1268.227] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event1)
[  1268.227] (**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  1268.227] (II) Using input driver 'evdev' for 'CHICONY USB Keyboard'
[  1268.227] (**) CHICONY USB Keyboard: always reports core events
[  1268.227] (**) evdev: CHICONY USB Keyboard: Device: "/dev/input/event1"
[  1268.227] (--) evdev: CHICONY USB Keyboard: Vendor 0x4f2 Product 0x833
[  1268.227] (--) evdev: CHICONY USB Keyboard: Found keys
[  1268.227] (II) evdev: CHICONY USB Keyboard: Configuring as keyboard
[  1268.227] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input1/event1"
[  1268.227] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 9)
[  1268.227] (**) Option "xkb_rules" "evdev"
[  1268.227] (**) Option "xkb_model" "pc105"
[  1268.227] (**) Option "xkb_layout" "us,ru"
[  1268.227] (**) Option "xkb_variant" ","
[  1268.227] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  1268.228] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event2)
[  1268.228] (**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  1268.228] (II) Using input driver 'evdev' for 'CHICONY USB Keyboard'
[  1268.228] (**) CHICONY USB Keyboard: always reports core events
[  1268.228] (**) evdev: CHICONY USB Keyboard: Device: "/dev/input/event2"
[  1268.228] (--) evdev: CHICONY USB Keyboard: Vendor 0x4f2 Product 0x833
[  1268.228] (--) evdev: CHICONY USB Keyboard: Found keys
[  1268.228] (II) evdev: CHICONY USB Keyboard: Configuring as keyboard
[  1268.228] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.
1/usb4/4-1/4-1:1.1/input/input2/event2"
[  1268.228] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 10)
[  1268.228] (**) Option "xkb_rules" "evdev"
[  1268.228] (**) Option "xkb_model" "pc105"
[  1268.228] (**) Option "xkb_layout" "us,ru"
[  1268.228] (**) Option "xkb_variant" ","
[  1268.228] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  1268.228] (II) config/udev: Adding input device HID 0a5c:4502 (/dev/input/event3)
[  1268.228] (**) HID 0a5c:4502: Applying InputClass "evdev keyboard catchall"
[  1268.228] (II) Using input driver 'evdev' for 'HID 0a5c:4502'
[  1268.228] (**) HID 0a5c:4502: always reports core events
[  1268.228] (**) evdev: HID 0a5c:4502: Device: "/dev/input/event3"
[  1268.228] (--) evdev: HID 0a5c:4502: Vendor 0xa5c Product 0x4502
[  1268.228] (--) evdev: HID 0a5c:4502: Found keys
[  1268.228] (II) evdev: HID 0a5c:4502: Configuring as keyboard
[  1268.228] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3/event3"
[  1268.229] (II) XINPUT: Adding extended input device "HID 0a5c:4502" (type: KEYBOARD, id 11)
[  1268.229] (**) Option "xkb_rules" "evdev"
[  1268.229] (**) Option "xkb_model" "pc105"
[  1268.229] (**) Option "xkb_layout" "us,ru"
[  1268.229] (**) Option "xkb_variant" ","
[  1268.229] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  1268.229] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/event4)
[  1268.229] (**) HID 0a5c:4503: Applying InputClass "evdev pointer catchall"
[  1268.229] (II) Using input driver 'evdev' for 'HID 0a5c:4503'
[  1268.229] (**) HID 0a5c:4503: always reports core events
[  1268.229] (**) evdev: HID 0a5c:4503: Device: "/dev/input/event4"
[  1268.229] (--) evdev: HID 0a5c:4503: Vendor 0xa5c Product 0x4503
[  1268.229] (--) evdev: HID 0a5c:4503: Found 3 mouse buttons
[  1268.229] (--) evdev: HID 0a5c:4503: Found relative axes
[  1268.229] (--) evdev: HID 0a5c:4503: Found x and y relative axes
[  1268.229] (II) evdev: HID 0a5c:4503: Configuring as mouse
[  1268.229] (**) evdev: HID 0a5c:4503: YAxisMapping: buttons 4 and 5
[  1268.229] (**) evdev: HID 0a5c:4503: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1268.229] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4/event4"
[  1268.229] (II) XINPUT: Adding extended input device "HID 0a5c:4503" (type: MOUSE, id 12)
[  1268.229] (II) evdev: HID 0a5c:4503: initialized for relative axes.
[  1268.229] (**) HID 0a5c:4503: (accel) keeping acceleration scheme 1
[  1268.229] (**) HID 0a5c:4503: (accel) acceleration profile 0
[  1268.229] (**) HID 0a5c:4503: (accel) acceleration factor: 2.000
[  1268.229] (**) HID 0a5c:4503: (accel) acceleration threshold: 4
[  1268.230] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/mouse1)
[  1268.230] (II) No input driver specified, ignoring this device.
[  1268.230] (II) This device may have been added with another device file.
[  1268.230] (II) config/udev: Adding input device A4TECH USB2.0 PC Camera (/dev/input/event20)
[  1268.230] (**) A4TECH USB2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[  1268.230] (II) Using input driver 'evdev' for 'A4TECH USB2.0 PC Camera'
[  1268.230] (**) A4TECH USB2.0 PC Camera: always reports core events
[  1268.230] (**) evdev: A4TECH USB2.0 PC Camera: Device: "/dev/input/event20"
[  1268.230] (--) evdev: A4TECH USB2.0 PC Camera: Vendor 0xac8 Product 0x3420
[  1268.230] (--) evdev: A4TECH USB2.0 PC Camera: Found keys
[  1268.230] (II) evdev: A4TECH USB2.0 PC Camera: Configuring as keyboard
[  1268.230] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input20/event20"
[  1268.230] (II) XINPUT: Adding extended input device "A4TECH USB2.0 PC Camera" (type: KEYBOARD, id 13)
[  1268.230] (**) Option "xkb_rules" "evdev"
[  1268.230] (**) Option "xkb_model" "pc105"
[  1268.230] (**) Option "xkb_layout" "us,ru"
[  1268.230] (**) Option "xkb_variant" ","
[  1268.230] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[  1268.230] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[  1268.230] (II) No input driver specified, ignoring this device.
[  1268.230] (II) This device may have been added with another device file.
[  1268.231] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[  1268.231] (II) No input driver specified, ignoring this device.
[  1268.231] (II) This device may have been added with another device file.
[  1268.231] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[  1268.231] (II) No input driver specified, ignoring this device.
[  1268.231] (II) This device may have been added with another device file.
[  1268.231] (II) config/udev: Adding input device HDA Intel Line-out (/dev/input/event12)
[  1268.231] (II) No input driver specified, ignoring this device.
[  1268.231] (II) This device may have been added with another device file.
[  1268.231] (II) config/udev: Adding input device HDA Intel Line-out (/dev/input/event13)
[  1268.231] (II) No input driver specified, ignoring this device.
[  1268.231] (II) This device may have been added with another device file.
[  1268.231] (II) config/udev: Adding input device HDA Intel Line-out (/dev/input/event14)
[  1268.231] (II) No input driver specified, ignoring this device.
[  1268.231] (II) This device may have been added with another device file.
[  1268.232] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event15)
[  1268.232] (II) No input driver specified, ignoring this device.
[  1268.232] (II) This device may have been added with another device file.
[  1268.232] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[  1268.232] (II) No input driver specified, ignoring this device.
[  1268.232] (II) This device may have been added with another device file.
[  1268.232] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[  1268.232] (II) No input driver specified, ignoring this device.
[  1268.232] (II) This device may have been added with another device file.
[  1268.304] (II) NOUVEAU(0): EDID vendor "GSM", prod id 17283
[  1268.304] (II) NOUVEAU(0): Using hsync ranges from config file
[  1268.304] (II) NOUVEAU(0): Using vrefresh ranges from config file
[  1268.304] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  1268.304] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[  1268.304] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1268.304] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  1268.304] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1268.304] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  1268.304] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  1268.304] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1268.304] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  1268.304] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  1268.304] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
root@dimon:/home/metaldemon#


При этом мышь у меня реагировала, как я описывал в вопросе сверху, но клавиатура работала исправно.

P.S.
Единственно о чём я забыл упомянуть это то, что мышь у меня не совсем обычная называется MAD CATZ Cyborg RAT 7, может из-за этого IceWM с ней не дружит? ???
 

Оффлайн vladimir_ar

Re: IceWM периодически не реагирует на команды...
« Ответ #5 : 19 Февраля 2014, 11:36:15 »
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
Гугл говорит, что ошибки или связанные с прошивкой на чип PCI-E, или с ACPI. Варианты лечения там-же. Как вариант - поставить новое ядро (например, 3.12). Драйвера на видео после переустановки ядра полностью переустановить.
Debian Testing, kernel 3.16-2-amd64, OpenBox
AMD A8-3750 / 16Gb RAM / ATI HD6550D (onboard) / Sound ASUS Xonar - DS
_______________________________
Debian Testing, kernel 3.14-2-amd64, OpenBox
HP-655 AMD E1 / 8Gb RAM / ATI HD7310M
 

Оффлайн metaldemon

Re: IceWM периодически не реагирует на команды...
« Ответ #6 : 20 Февраля 2014, 08:18:53 »
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
Гугл говорит, что ошибки или связанные с прошивкой на чип PCI-E, или с ACPI. Варианты лечения там-же. Как вариант - поставить новое ядро (например, 3.12). Драйвера на видео после переустановки ядра полностью переустановить.
Хорошо, спасибо. Попробую порыть в этом направлении, может что получится, о результате сообщу :)
 

Оффлайн metaldemon

Re: IceWM периодически не реагирует на команды...
« Ответ #7 : 02 Апреля 2014, 14:02:19 »
Нашёл инфу о том что такое возникает из-за мышки и проблема именно в ней, поэтому ядра и прочую "ерунду" копать пока не буду...
 

Теги:
     

    [Решено] Приложения в IceWM

    Автор grek

    Ответов: 4
    Просмотров: 2394
    Последний ответ 24 Ноября 2014, 19:16:47
    от grek
    [Решено] OpenOffice от Инфраресурса на Debian 6.02 - меню в IceWM

    Автор Stanislav77

    Ответов: 1
    Просмотров: 2255
    Последний ответ 03 Октября 2011, 23:32:06
    от grek
    Панели для IceWm?

    Автор wwnet

    Ответов: 0
    Просмотров: 1595
    Последний ответ 13 Февраля 2020, 11:58:11
    от wwnet
    Настройка icewm

    Автор qwerty900

    Ответов: 5
    Просмотров: 4133
    Последний ответ 13 Июня 2015, 17:51:01
    от grek
    автозапуск и icewm

    Автор bjiag0

    Ответов: 8
    Просмотров: 4162
    Последний ответ 18 Марта 2012, 00:56:38
    от grek