s.m.a.r.t

mihail_1 · 08 апреля 2014, 11:00:48

В связи с регулярной порчей mysql индексных файлов, порекомендовали проверить диски. Но из полученных данных я так и не понял: все диски хорошие или все нужно выбросить?:

root@debian:/etc/init.d# smartctl -a /dev/sda

Открыть содержимое (спойлер)

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST3320418AS
Serial Number: 9VM00SBQ
LU WWN Device Id: 5 000c50 0113b1cf9
Firmware Version: CC34
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Apr 8 10:49:52 2014 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 74) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 122724071
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 256
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 12
7 Seek_Error_Rate 0x000f 061 055 030 Pre-fail Always - 4867749356493
9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23013
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 260
183 Runtime_Bad_Block 0x0000 099 099 000 Old_age Offline - 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 108
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 058 045 Old_age Always - 36 (Min/Max 30/42)
194 Temperature_Celsius 0x0022 036 042 000 Old_age Always - 36 (0 24 0 0)
195 Hardware_ECC_Recovered 0x001a 045 026 000 Old_age Always - 122724071
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 198 000 Old_age Always - 4
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 170024870370319
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2744229187
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2241735239

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@debian:/etc/init.d# smartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31500341AS
Serial Number: 9VS11K4J
LU WWN Device Id: 5 000c50 010d7a2d1
Firmware Version: CC1H
User Capacity: 1 500 301 910 016 bytes [1,50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Apr 8 10:52:06 2014 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 150550778
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 296
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 29
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 656699376
9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23096
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 302
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 12885098505
189 High_Fly_Writes 0x003a 045 045 000 Old_age Always - 55
190 Airflow_Temperature_Cel 0x0022 061 047 045 Old_age Always - 39 (Min/Max 33/46)
194 Temperature_Celsius 0x0022 039 053 000 Old_age Always - 39 (0 24 0 0)
195 Hardware_ECC_Recovered 0x001a 047 024 000 Old_age Always - 150550778
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4767413721606
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3518690059
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1072392871

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[свернуть]

root@debian:/etc/init.d# smartctl -a /dev/sdc

Открыть содержимое (спойлер)

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31500341AS
Serial Number: 9VS11N3A
LU WWN Device Id: 5 000c50 010d75e1b
Firmware Version: CC1H
User Capacity: 1 500 301 910 016 bytes [1,50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Apr 8 10:52:37 2014 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 238903126
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 297
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 35
7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 812495234
9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23098
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 301
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 092 000 Old_age Always - 128850985124
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 150
190 Airflow_Temperature_Cel 0x0022 061 047 045 Old_age Always - 39 (Min/Max 33/47)
194 Temperature_Celsius 0x0022 039 053 000 Old_age Always - 39 (0 24 0 0)
195 Hardware_ECC_Recovered 0x001a 042 023 000 Old_age Always - 238903126
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 243735099103743
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 509356619
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2401460257

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[свернуть]

root@debian:/etc/init.d# smartctl -a /dev/sdd

Открыть содержимое (спойлер)

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31500341AS
Serial Number: 9VS1J1XA
LU WWN Device Id: 5 000c50 01138df48
Firmware Version: CC1H
User Capacity: 1 500 301 910 016 bytes [1,50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Apr 8 10:52:43 2014 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 124024585
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 296
5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 68
7 Seek_Error_Rate 0x000f 090 060 030 Pre-fail Always - 958911707
9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23096
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 301
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 099 099 000 Old_age Always - 1
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 356487725139
189 High_Fly_Writes 0x003a 095 095 000 Old_age Always - 5
190 Airflow_Temperature_Cel 0x0022 060 042 045 Old_age Always In_the_past 40 (0 39 47 35)
194 Temperature_Celsius 0x0022 040 058 000 Old_age Always - 40 (0 24 0 0)
195 Hardware_ECC_Recovered 0x001a 036 017 000 Old_age Always - 124024585
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 74590697052642
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2459991248
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2130693404

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[свернуть]

root@debian:/etc/init.d# smartctl -a /dev/sde

Открыть содержимое (спойлер)

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST3320418AS
Serial Number: 9VM062EY
LU WWN Device Id: 5 000c50 014a9c0a7
Firmware Version: CC34
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Apr 8 10:52:51 2014 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 625) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 74) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 112 098 006 Pre-fail Always - 49727889
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 287
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 10
7 Seek_Error_Rate 0x000f 090 060 030 Pre-fail Always - 1270195546
9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23011
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 294
183 Runtime_Bad_Block 0x0000 100 100 000 Old_age Offline - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 162
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 26
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 794
190 Airflow_Temperature_Cel 0x0022 066 059 045 Old_age Always - 34 (Min/Max 29/41)
194 Temperature_Celsius 0x0022 034 041 000 Old_age Always - 34 (0 23 0 0)
195 Hardware_ECC_Recovered 0x001a 048 025 000 Old_age Always - 49727889
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 5
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 212188564315171
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 622484904
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2372617968

SMART Error Log Version: 1
ATA Error Count: 162 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 162 occurred at disk power-on lifetime: 22608 hours (942 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a2 3a 04 00 Error: UNC at LBA = 0x00043aa2 = 277154

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 3a 04 e0 00 42d+14:25:42.194 READ DMA
27 00 00 00 00 00 e0 00 42d+14:25:42.168 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 42d+14:25:42.167 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 42d+14:25:42.128 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 42d+14:25:42.102 READ NATIVE MAX ADDRESS EXT

Error 161 occurred at disk power-on lifetime: 22608 hours (942 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a2 3a 04 00 Error: UNC at LBA = 0x00043aa2 = 277154

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 3a 04 e0 00 42d+14:25:39.312 READ DMA
27 00 00 00 00 00 e0 00 42d+14:25:39.286 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 42d+14:25:39.285 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 42d+14:25:39.272 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 42d+14:25:39.169 READ NATIVE MAX ADDRESS EXT

Error 160 occurred at disk power-on lifetime: 22608 hours (942 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a2 3a 04 00 Error: UNC at LBA = 0x00043aa2 = 277154

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 3a 04 e0 00 42d+14:25:36.448 READ DMA
27 00 00 00 00 00 e0 00 42d+14:25:36.422 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 42d+14:25:36.421 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 42d+14:25:36.408 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 42d+14:25:36.382 READ NATIVE MAX ADDRESS EXT

Error 159 occurred at disk power-on lifetime: 22608 hours (942 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a2 3a 04 00 Error: UNC at LBA = 0x00043aa2 = 277154

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 3a 04 e0 00 42d+14:25:33.606 READ DMA
27 00 00 00 00 00 e0 00 42d+14:25:33.558 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 42d+14:25:33.557 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 42d+14:25:33.544 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 42d+14:25:33.518 READ NATIVE MAX ADDRESS EXT

Error 158 occurred at disk power-on lifetime: 22608 hours (942 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a2 3a 04 00 Error: UNC at LBA = 0x00043aa2 = 277154

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 3a 04 e0 00 42d+14:25:30.695 READ DMA
27 00 00 00 00 00 e0 00 42d+14:25:30.669 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 42d+14:25:30.668 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 42d+14:25:30.655 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 42d+14:25:30.629 READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[свернуть]

root@debian:/etc/init.d# smartctl -a /dev/sdf

Открыть содержимое (спойлер)

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3320620AS
Serial Number: 9QF5CEGY
Firmware Version: 3.AAK
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Apr 8 10:53:11 2014 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 106 096 006 Pre-fail Always - 156661245
3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 37
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 436948556
9 Power_On_Hours 0x0032 056 056 000 Old_age Always - 38700
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 35
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 060 047 045 Old_age Always - 40 (Min/Max 34/47)
194 Temperature_Celsius 0x0022 040 053 000 Old_age Always - 40 (0 22 0 0)
195 Hardware_ECC_Recovered 0x001a 064 060 000 Old_age Always - 53342435
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000

[свернуть]

qupl · 08 апреля 2014, 11:11:31

sdf нормальный, остальные сыпятся потихоньку.

mihail_1 · 08 апреля 2014, 11:52:34

Ну как всегда. sdf маленький старенький, но хороший. А на sdb,c,d только два месяца, как гарантия закончилась.
А можно чуть подробнее? "сыпятся потихоньку" - это достаточная причина разрушения данных?
И куда самому смотреть в этой информации? (я что-то особо отличий не заметил)

qupl · 08 апреля 2014, 12:12:26

mihail_1, у всех кроме sdf есть перерапределенные сектора.

5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 10

Чем выше значение тем хуже. Правда иногда бывает с новья сразу присутствует несколько штук. Когда значение дойдет до максимального начнут появляться BAD-ы.
http://linuxguru.ru/administration/smart-proverka-diskov-v-debian/

Русскоязычное сообщество Debian GNU/Linux

s.m.a.r.t

mihail_1

qupl

mihail_1

qupl