[Решено]Не могу выставить разрешение 1024х768 в Debian Squeeze

[userok2008]

Здравствуйте ув.форумчане.
Есть ноут Fujitsu-Siemens S4542,древний(ориентировочно не позднее 2000г выпуска),но хорошо сохранившийся аппарат.Он имеет несколько специфическую матрицу(конкретную модель,программными методами выяснить не удалось,а разбирать и смотреть лейбу проблемно,т.к пластмасса от времени пересохла и защелки при разборке 100%-но "посыпятся")расчитанную на работу под виндос 98-2000.Специфика в том,что при разрешении от 800х600 и менее,изображение развертывается не на всю площадь матрицы,а в окно по центру 12" дюймовой матрицы.Для использования всей площади,нужно выставить максимальное для этой матрицы 1024х768,при этом максимальная цветность не может быть более 16 бит.При цветности в 32 бит,разрешение автоматически понижается до 800х600.Вертикальная развертка указана открыто-60 Гц,а вот горизонтальная и тактовая частоты не известны.
Помимо винды,установлен дебиан,однако использовать всю полезную площадь матрицы в этой ОС у меня не получается.Простейшее решение через xrandr не проходит,т,к говорит-нет такого мода).Создание и модификации xorg.conf, также к желаемому результату не привели...Несуществующий мод был сгенерирован одним из вэб-генераторов(при указании доступных параметров,взятых из xorg.log),однако при этом он ругнулся,указывая на то,что частота горизонтальной развертки(24.3 кГц) ниже минимальной в 37 кГц.
Если одна из частот(вертикальной или горизонтальной развертки)отклоняется от ВСЕХ частот модов(как было и в вышеуказанном случае),то иксы на загружаются вообще.Максимум,что мне удалось добиться-указать "стандартную" для матриц с подобным разрешением,частоту горизонтальной развертки в 48.4 кГц и тактовой 40-50 мГц,при этом,"картинка" растянулась полноэкранно только до половины площади,с изображением,вытянутым по-вертикали.В таком режиме,система работает 4-5 сек и "вырубается"...Интересно, что в логе этот эксперимент никак не отображается).
Для полноты картины,привожу xorg.log:

Открыть содержимое (спойлер)

Код Выделить Развернуть

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
Current Operating System: Linux debian 2.6.32-5-486 #1 Tue May 13 16:15:32 UTC 2014 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-486 root=UUID=df1af4ae-603c-4860-9f9a-88c39800aa17 ro quiet
Build Date: 17 December 2013  08:26:59PM
xorg-server 2:1.7.7-18 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.24.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 20 13:12:36 2015
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81eccc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:20:0) 1023:9525:10cf:1094 Trident Microsystems Cyber 9525 rev 73, Mem @ 0xfe800000/4194304, 0xfe120000/131072, 0xfe400000/4194304, BIOS @ 0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "trident"
(II) Loading /usr/lib/xorg/modules/drivers/trident_drv.so
(II) Module trident: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.3.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
cyberbladeAi1d, bladeXP, cyberbladeXPAi1, cyberbladeXP4, XP5
(II) Primary Device is: PCI 00@00:14:0
(WW) Falling back to old probe method for trident
(--) Chipset cyber9525dvd found
(**) TRIDENT(0): Depth 16, (--) framebuffer bpp 16
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) TRIDENT(0): RGB weight 565
(==) TRIDENT(0): Default visual is TrueColor
(==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) TRIDENT(0): Using XAA for acceleration
(==) TRIDENT(0): Linear framebuffer at 0xFE800000
(--) TRIDENT(0): IO registers at 0xFE120000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) TRIDENT(0): initializing int10
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(II) TRIDENT(0): VESA BIOS detected
(II) TRIDENT(0): VESA VBE Version 2.0
(II) TRIDENT(0): VESA VBE Total Mem: 2560 kB
(II) TRIDENT(0): VESA VBE OEM: Copyright 1997 TRIDENT MICROSYSTEMS INC.

(II) TRIDENT(0): VESA VBE OEM Software Rev: 0.0
(II) TRIDENT(0): VESA VBE OEM Vendor:
(II) TRIDENT(0): VESA VBE OEM Product:
(II) TRIDENT(0): VESA VBE OEM Product Rev:
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) TRIDENT(0): VESA VBE DDC supported
(II) TRIDENT(0): VESA VBE DDC Level none
(II) TRIDENT(0): VESA VBE DDC transfer in appr. 0 sec.
(II) TRIDENT(0): VESA VBE DDC read failed
(--) TRIDENT(0): Revision is 65
(--) TRIDENT(0): Found Cyber 9525/DVD chip
(--) TRIDENT(0): RAM type is SGRAM
(--) TRIDENT(0): Using HW cursor
(--) TRIDENT(0): VideoRAM: 2560 kByte
(--) TRIDENT(0): TFT Panel 1024x768 found
(--) TRIDENT(0): Memory Clock is 100.00 MHz
(==) TRIDENT(0): Min pixel clock is 12 MHz
(--) TRIDENT(0): Max pixel clock is 230 MHz
(II) TRIDENT(0): Monitor0: Using hsync value of 37.90 kHz
(II) TRIDENT(0): Monitor0: Using vrefresh value of 60.30 Hz
(II) TRIDENT(0): Clock range:  12.00 to 230.00 MHz
(II) TRIDENT(0): Not using mode "1024x768" (hsync out of range)
(II) TRIDENT(0): Not using default mode "640x350" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "320x175" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "640x400" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "320x200" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "720x400" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "360x200" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
(II) TRIDENT(0): Not using default mode "320x240" (hsync out of range)
(II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "320x240" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
(II) TRIDENT(0): Not using default mode "320x240" (hsync out of range)
(II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
(II) TRIDENT(0): Not using default mode "320x240" (hsync out of range)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "400x300" (hsync out of range)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "400x300" (hsync out of range)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "400x300" (hsync out of range)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "400x300" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1280x960) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1280x960" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
(II) TRIDENT(0): Removing mode (1280x960) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1280x960" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
(II) TRIDENT(0): Removing mode (1280x1024) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1280x1024" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x512" (hsync out of range)
(II) TRIDENT(0): Removing mode (1280x1024) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1280x1024" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x512" (hsync out of range)
(II) TRIDENT(0): Removing mode (1280x1024) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1280x1024" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x512" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "896x672" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "896x672" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "928x696" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "928x696" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "960x720" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "960x720" (hsync out of range)
(II) TRIDENT(0): Not using default mode "832x624" (hsync out of range)
(II) TRIDENT(0): Not using default mode "416x312" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1360x768) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1360x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "680x384" (hsync out of range)
(II) TRIDENT(0): Removing mode (1360x768) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1360x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "680x384" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "700x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "700x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "700x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "700x525" (hsync out of range)
(II) TRIDENT(0): Removing mode (1440x900) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1440x900" (unknown reason)
(II) TRIDENT(0): Not using default mode "720x450" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "800x512" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1920x1080" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "960x540" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "960x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "960x720" (hsync out of range)
(II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) TRIDENT(0): Not using mode "1024x768" (no mode of this name)
(--) TRIDENT(0): Virtual size is 800x600 (pitch 800)
(**) TRIDENT(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) TRIDENT(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) TRIDENT(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) TRIDENT(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(==) TRIDENT(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) TRIDENT(0): Initializing int10
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3           0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers:        0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09           0x24 (0x08)
(II) TRIDENT(0): V-timing registers:        0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 77 for: 800x600
(II) TRIDENT(0): Found Clock  65.00 n=219 m=23 k=1
(II) TRIDENT(0): Using 1038 scanlines of offscreen memory for area's
(II) TRIDENT(0): Using 640 bytes of offscreen memory for linear (offset=0x27fd80)
(II) TRIDENT(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Scanline Image Writes
Setting up tile and stipple cache:
24 128x128 slots
6 256x256 slots
(==) TRIDENT(0): Backing store disabled
(==) TRIDENT(0): Silken mouse enabled
(==) TRIDENT(0): DPMS enabled
(II) TRIDENT(0): Trident Video Flags:   
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0

[свернуть]

и xorg.conf:

Открыть содержимое (спойлер)

Код Выделить Развернуть

Section "ServerLayout"
Identifier     "X.org Configured"
Screen      0  "Screen0" 0 0
InputDevice    "Mouse0" "CorePointer"
InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath   "/usr/lib/xorg/modules"
FontPath     "/usr/share/fonts/X11/misc"
FontPath     "/usr/share/fonts/X11/cyrillic"
FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/Type1"
FontPath     "/usr/share/fonts/X11/100dpi"
FontPath     "/usr/share/fonts/X11/75dpi"
FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath     "built-ins"
EndSection

Section "Module"
Load  "glx"
Load  "record"
Load  "extmod"
Load  "dri"
Load  "dbe"
Load  "dri2"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver      "kbd"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver      "mouse"
Option     "Protocol" "auto"
Option     "Device" "/dev/input/mice"
Option     "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier   "Monitor0" 
VendorName   "Monitor Vendor"
ModelName    "Monitor Model"
        Modeline     "1024x768" 40.00 1024 1056 1160 1192 768 785 789 807 
        HorizSync    37.9
        VertRefresh  60.3
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "AccelMethod"        # [<str>]
        #Option     "SWcursor"            # [<bool>]
        #Option     "PciRetry"            # [<bool>]
        #Option     "NoAccel"            # [<bool>]
        #Option     "SetMClk"            # <freq>
        #Option     "MUXThreshold"        # <i>
        #Option     "ShadowFB"            # [<bool>]
        #Option     "Rotate"              # [<str>]
        #Option     "VideoKey"            # <i>
        #Option     "NoMMIO"              # [<bool>]
        #Option     "NoPciBurst"          # [<bool>]
        #Option     "MMIOonly"            # [<bool>]
        #Option     "CyberShadow"        # [<bool>]
        #Option     "CyberStretch"        # [<bool>]
        #Option     "XvHsync"            # <i>
        #Option     "XvVsync"            # <i>
        #Option     "XvBskew"            # <i>
        #Option     "XvRskew"            # <i>
        #Option     "FpDelay"            # <i>
        #Option     "Display1400"        # [<bool>]
        #Option     "Display"            # [<str>]
        #Option     "GammaBrightness"    # [<str>]
        #Option     "TVChipset"          # [<str>]
        #Option     "TVSignal"            # <i>
Identifier  "Card0"
Driver      "trident"
VendorName  "Trident Microsystems"
BoardName   "Cyber 9525"
BusID       "PCI:0:20:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Card0"
Monitor    "Monitor0"
        DefaultDepth 16
SubSection "Display"
Viewport   0 0
Depth      16
                Modes      "1024x768"
EndSubSection
EndSection


[свернуть]

[qupl]

Код Выделить Развернуть


xrandr -q
gtf 1024 768 60

[userok2008]

qupl, на xrandr -q
gtf 1024 768 60, только список опций использования xrandr выводит.

[ferum]

Это две команды.

[userok2008]

qupl, ferum, Первая команда ничего не дала,а вот вторая,вывела нужные частотные данные,которые были прописаны в xorg.conf и все срослось!
Всем спасибо,тему можно закрывать.

[qupl]

userok2008, исправьте первое сообщение темы, добавив в заголовок [Решено]