Gnome 3 Установка

[Fang]

Добрый день!
Поставил Debian Wheezy .... Gnome 3 режим не работает /синие квадраты в место икон/, Classic режим работает .... после установил родной драйвер Nvidia - Gnome 3 -   заставка появилась но Gnome 3 работает супер медленно / практически не работает/ Classic режим работает нормамально.
здесь мой Xorg.0.log :

Открыть содержимое (спойлер)

[    17.478]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    17.479] X Protocol Version 11, Revision 0
[    17.479] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    17.479] Current Operating System: Linux debian 3.2.0-4-686-pae #1 SMP Debian 3.2.39-2 i686
[    17.479] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=1f68b739-e776-4276-81c2-4a83d10334cf ro initrd=/install/gtk/initrd.gz quiet
[    17.479] Build Date: 23 February 2013  06:25:22PM
[    17.479] xorg-server 2:1.12.4-5 (Julien Cristau <jcristau@debian.org>)
[    17.479] Current version of pixman: 0.26.0
[    17.479]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    17.479] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.479] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 17 09:46:49 2013
[    17.491] (==) Using config file: "/etc/X11/xorg.conf"
[    17.491] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    17.509] (==) ServerLayout "Layout0"
[    17.509] (**) |-->Screen "Screen0" (0)
[    17.509] (**) |   |-->Monitor "Monitor0"
[    17.530] (**) |   |-->Device "Device0"
[    17.530] (**) |-->Input Device "Keyboard0"
[    17.530] (**) |-->Input Device "Mouse0"
[    17.530] (**) Option "Xinerama" "0"
[    17.530] (==) Automatically adding devices
[    17.530] (==) Automatically enabling devices
[    17.625] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    17.625]    Entry deleted from font path.
[    17.625] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/cyrillic,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[    17.625] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.625] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    17.625] (WW) Disabling Keyboard0
[    17.625] (WW) Disabling Mouse0
[    17.625] (II) Loader magic: 0xb77585a0
[    17.625] (II) Module ABI versions:
[    17.625]    X.Org ANSI C Emulation: 0.4
[    17.625]    X.Org Video Driver: 12.1
[    17.625]    X.Org XInput driver : 16.0
[    17.625]    X.Org Server Extension : 6.0
[    17.626] (--) PCI:*(0:1:0:0) 10de:0312:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, BIOS @ 0x??/131072
[    17.626] (II) Open ACPI successful (/var/run/acpid.socket)
[    17.626] (II) LoadModule: "extmod"
[    17.628] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    17.642] (II) Module extmod: vendor="X.Org Foundation"
[    17.642]    compiled for 1.12.4, module version = 1.0.0
[    17.642]    Module class: X.Org Server Extension
[    17.642]    ABI class: X.Org Server Extension, version 6.0
[    17.642] (II) Loading extension SELinux
[    17.642] (II) Loading extension MIT-SCREEN-SAVER
[    17.642] (II) Loading extension XFree86-VidModeExtension
[    17.642] (II) Loading extension XFree86-DGA
[    17.642] (II) Loading extension DPMS
[    17.642] (II) Loading extension XVideo
[    17.642] (II) Loading extension XVideo-MotionCompensation
[    17.642] (II) Loading extension X-Resource
[    17.642] (II) LoadModule: "dbe"
[    17.643] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    17.654] (II) Module dbe: vendor="X.Org Foundation"
[    17.654]    compiled for 1.12.4, module version = 1.0.0
[    17.654]    Module class: X.Org Server Extension
[    17.654]    ABI class: X.Org Server Extension, version 6.0
[    17.655] (II) Loading extension DOUBLE-BUFFER
[    17.655] (II) LoadModule: "glx"
[    17.655] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.768] (II) Module glx: vendor="NVIDIA Corporation"
[    18.768]    compiled for 4.0.2, module version = 1.0.0
[    18.768]    Module class: X.Org Server Extension
[    18.768] (II) NVIDIA GLX Module  173.14.36  Tue Sep 11 12:33:25 PDT 2012
[    18.768] (II) Loading extension GLX
[    18.768] (II) LoadModule: "record"
[    18.769] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    18.781] (II) Module record: vendor="X.Org Foundation"
[    18.781]    compiled for 1.12.4, module version = 1.13.0
[    18.781]    Module class: X.Org Server Extension
[    18.781]    ABI class: X.Org Server Extension, version 6.0
[    18.781] (II) Loading extension RECORD
[    18.781] (II) LoadModule: "dri"
[    18.781] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    19.048] (II) Module dri: vendor="X.Org Foundation"
[    19.048]    compiled for 1.12.4, module version = 1.0.0
[    19.048]    ABI class: X.Org Server Extension, version 6.0
[    19.048] (II) Loading extension XFree86-DRI
[    19.048] (II) LoadModule: "dri2"
[    19.049] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    19.050] (II) Module dri2: vendor="X.Org Foundation"
[    19.050]    compiled for 1.12.4, module version = 1.2.0
[    19.050]    ABI class: X.Org Server Extension, version 6.0
[    19.050] (II) Loading extension DRI2
[    19.050] (II) LoadModule: "nvidia"
[    19.050] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    19.113] (II) Module nvidia: vendor="NVIDIA Corporation"
[    19.113]    compiled for 4.0.2, module version = 1.0.0
[    19.113]    Module class: X.Org Video Driver
[    19.135] (II) NVIDIA dlloader X Driver  173.14.36  Tue Sep 11 12:21:22 PDT 2012
[    19.135] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    19.135] (++) using VT number 7

[    19.185] (II) Loading sub module "fb"
[    19.185] (II) LoadModule: "fb"
[    19.185] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.197] (II) Module fb: vendor="X.Org Foundation"
[    19.197]    compiled for 1.12.4, module version = 1.0.0
[    19.197]    ABI class: X.Org ANSI C Emulation, version 0.4
[    19.197] (II) Loading sub module "wfb"
[    19.197] (II) LoadModule: "wfb"
[    19.197] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    19.204] (II) Module wfb: vendor="X.Org Foundation"
[    19.204]    compiled for 1.12.4, module version = 1.0.0
[    19.204]    ABI class: X.Org ANSI C Emulation, version 0.4
[    19.204] (II) Loading sub module "ramdac"
[    19.205] (II) LoadModule: "ramdac"
[    19.205] (II) Module "ramdac" already built-in
[    19.219] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    19.219] (==) NVIDIA(0): RGB weight 888
[    19.219] (==) NVIDIA(0): Default visual is TrueColor
[    19.219] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    19.219] (**) NVIDIA(0): Option "TwinView" "0"
[    19.219] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0"
[    19.220] (**) NVIDIA(0): Enabling RENDER acceleration
[    19.221] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[    19.221] (II) NVIDIA(0):     enabled.
[    19.935] (II) NVIDIA(0): NVIDIA GPU GeForce FX 5600 (NV31) at PCI:1:0:0 (GPU-0)
[    19.935] (--) NVIDIA(0): Memory: 262144 kBytes
[    19.935] (--) NVIDIA(0): VideoBIOS: 04.31.20.38.00
[    19.935] (II) NVIDIA(0): Detected AGP rate: 8X
[    19.935] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    19.935] (--) NVIDIA(0): Connected display device(s) on GeForce FX 5600 at PCI:1:0:0:
[    19.935] (--) NVIDIA(0):     Acer H233H (DFP-0)
[    19.936] (--) NVIDIA(0): Acer H233H (DFP-0): 140.4 MHz maximum pixel clock
[    19.936] (--) NVIDIA(0): Acer H233H (DFP-0): Internal Dual Link TMDS
[    19.936] (II) NVIDIA(0): Assigned Display Device: DFP-0
[    19.936] (II) NVIDIA(0): Validated modes:
[    19.936] (II) NVIDIA(0):     "nvidia-auto-select+0+0"
[    19.936] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[    19.937] (--) NVIDIA(0): DPI set to (71, 78); computed from "UseEdidDpi" X config
[    19.937] (--) NVIDIA(0):     option
[    19.937] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    19.937] (--) Depth 24 pixmap format is 32 bpp
[    19.939] (II) NVIDIA(0): Initialized AGP GART.
[    19.942] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
[    20.069] (II) Loading extension NV-GLX
[    20.119] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[    20.135] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[    20.135] (==) NVIDIA(0): Backing store disabled
[    20.135] (==) NVIDIA(0): Silken mouse enabled
[    20.136] (**) NVIDIA(0): DPMS enabled
[    20.136] (II) Loading extension NV-CONTROL
[    20.136] (==) RandR enabled
[    20.136] (II) Initializing built-in extension Generic Event Extension
[    20.136] (II) Initializing built-in extension SHAPE
[    20.136] (II) Initializing built-in extension MIT-SHM
[    20.136] (II) Initializing built-in extension XInputExtension
[    20.136] (II) Initializing built-in extension XTEST
[    20.136] (II) Initializing built-in extension BIG-REQUESTS
[    20.136] (II) Initializing built-in extension SYNC
[    20.136] (II) Initializing built-in extension XKEYBOARD
[    20.136] (II) Initializing built-in extension XC-MISC
[    20.136] (II) Initializing built-in extension SECURITY
[    20.136] (II) Initializing built-in extension XINERAMA
[    20.136] (II) Initializing built-in extension XFIXES
[    20.136] (II) Initializing built-in extension RENDER
[    20.136] (II) Initializing built-in extension RANDR
[    20.137] (II) Initializing built-in extension COMPOSITE
[    20.137] (II) Initializing built-in extension DAMAGE
[    20.137] (II) SELinux: Disabled on system
[    20.141] (II) Initializing extension GLX
[    20.441] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    20.441] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.441] (II) LoadModule: "evdev"
[    20.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.465] (II) Module evdev: vendor="X.Org Foundation"
[    20.465]    compiled for 1.12.1, module version = 2.7.0
[    20.465]    Module class: X.Org XInput Driver
[    20.465]    ABI class: X.Org XInput driver, version 16.0
[    20.465] (II) Using input driver 'evdev' for 'Power Button'
[    20.465] (**) Power Button: always reports core events
[    20.465] (**) evdev: Power Button: Device: "/dev/input/event1"
[    20.465] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.465] (--) evdev: Power Button: Found keys
[    20.465] (II) evdev: Power Button: Configuring as keyboard
[    20.465] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    20.465] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.465] (**) Option "xkb_rules" "evdev"
[    20.465] (**) Option "xkb_model" "pc105"
[    20.465] (**) Option "xkb_layout" "us"
[    20.466] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    20.466] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.466] (II) Using input driver 'evdev' for 'Power Button'
[    20.466] (**) Power Button: always reports core events
[    20.466] (**) evdev: Power Button: Device: "/dev/input/event0"
[    20.466] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.466] (--) evdev: Power Button: Found keys
[    20.467] (II) evdev: Power Button: Configuring as keyboard
[    20.467] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    20.467] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    20.467] (**) Option "xkb_rules" "evdev"
[    20.467] (**) Option "xkb_model" "pc105"
[    20.467] (**) Option "xkb_layout" "us"
[    20.468] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event3)
[    20.468] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[    20.468] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[    20.468] (**) Logitech USB Laser Mouse: always reports core events
[    20.468] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event3"
[    20.468] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc069
[    20.468] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[    20.468] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[    20.468] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[    20.468] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[    20.468] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[    20.468] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[    20.468] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[    20.468] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.468] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3/event3"
[    20.468] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id
[    20.468] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[    20.469] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[    20.469] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[    20.469] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[    20.469] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[    20.469] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[    20.469] (II) No input driver specified, ignoring this device.
[    20.469] (II) This device may have been added with another device file.
[    20.470] (II) config/udev: Adding input device HID 0430:0005 (/dev/input/event4)
[    20.470] (**) HID 0430:0005: Applying InputClass "evdev keyboard catchall"
[    20.470] (II) Using input driver 'evdev' for 'HID 0430:0005'
[    20.470] (**) HID 0430:0005: always reports core events
[    20.470] (**) evdev: HID 0430:0005: Device: "/dev/input/event4"
[    20.470] (--) evdev: HID 0430:0005: Vendor 0x430 Product 0x5
[    20.470] (--) evdev: HID 0430:0005: Found keys
[    20.470] (II) evdev: HID 0430:0005: Configuring as keyboard
[    20.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4/event4"
[    20.470] (II) XINPUT: Adding extended input device "HID 0430:0005" (type: KEYBOARD, id 9)
[    20.470] (**) Option "xkb_rules" "evdev"
[    20.470] (**) Option "xkb_model" "pc105"
[    20.470] (**) Option "xkb_layout" "us"
[    20.471] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    20.471] (II) No input driver specified, ignoring this device.
[    20.471] (II) This device may have been added with another device file.
[    20.472] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event5)
[    20.472] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    20.472] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    20.472] (**) ACPI Virtual Keyboard Device: always reports core events
[    20.472] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event5"
[    20.472] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    20.472] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    20.472] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    20.472] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    20.472] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 10)
[    20.472] (**) Option "xkb_rules" "evdev"
[    20.472] (**) Option "xkb_model" "pc105"
[    20.472] (**) Option "xkb_layout" "us"

[свернуть]

запускаю Live OpenSUSE  на CD  - Gnome 3 работает отлично
здесь Xorg.0.log :

Открыть содержимое (спойлер)

[    33.585]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[    33.585] X Protocol Version 11, Revision 0
[    33.585] Build Operating System: openSUSE SUSE LINUX
[    33.585] Current Operating System: Linux linux 3.4.6-2.10-default #1 SMP Thu Jul 26 09:36:26 UTC 2012 (641c197) i686
[    33.585] Kernel command line: initrd=initrd ramdisk_size=512000 ramdisk_blocksize=4096 splash=silent quiet preloadlog=/dev/null video=1920x1080
[    33.586] Build Date: 25 July 2012  07:30:46PM
[    33.586] 
[    33.586] Current version of pixman: 0.24.4
[    33.586]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    33.586] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    33.586] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 17 15:17:19 2013
[    33.587] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    33.587] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    33.591] (==) No Layout section.  Using the first Screen section.
[    33.591] (==) No screen section available. Using defaults.
[    33.591] (**) |-->Screen "Default Screen Section" (0)
[    33.591] (**) |   |-->Monitor "<default monitor>"
[    33.591] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    33.591] (==) Automatically adding devices
[    33.591] (==) Automatically enabling devices
[    33.630] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    33.630]    Entry deleted from font path.
[    33.630] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    33.630]    Entry deleted from font path.
[    33.630] (WW) The directory "/usr/share/fonts/URW/" does not exist.
[    33.630]    Entry deleted from font path.
[    33.630] (WW) The directory "/usr/share/fonts/cyrillic" does not exist.
[    33.630]    Entry deleted from font path.
[    33.630] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    33.630]    Entry deleted from font path.
[    33.631] (==) FontPath set to:
   /usr/share/fonts/misc:unscaled,
   /usr/share/fonts/75dpi:unscaled,
   /usr/share/fonts/truetype/,
   built-ins
[    33.631] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    33.631] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    33.631] (II) Loader magic: 0x8228580
[    33.631] (II) Module ABI versions:
[    33.631]    X.Org ANSI C Emulation: 0.4
[    33.631]    X.Org Video Driver: 12.0
[    33.631]    X.Org XInput driver : 16.0
[    33.631]    X.Org Server Extension : 6.0
[    33.632] (--) PCI:*(0:1:0:0) 10de:0312:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, BIOS @ 0x??/131072
[    33.633] (II) Open ACPI successful (/var/run/acpid.socket)
[    33.633] (II) "extmod" will be loaded by default.
[    33.633] (II) "dbe" will be loaded by default.
[    33.633] (II) "glx" will be loaded by default.
[    33.633] (II) "record" will be loaded by default.
[    33.633] (II) "dri" will be loaded by default.
[    33.633] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[    33.633] (II) LoadModule: "dri2"
[    33.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    33.650] (II) Module dri2: vendor="X.Org Foundation"
[    33.650]    compiled for 1.12.3, module version = 1.2.0
[    33.650]    ABI class: X.Org Server Extension, version 6.0
[    33.650] (II) Loading extension DRI2
[    33.650] (II) LoadModule: "glamoregl"
[    33.651] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    33.875] (II) Module glamoregl: vendor="X.Org Foundation"
[    33.875]    compiled for 1.12.3, module version = 0.4.0
[    33.875]    ABI class: X.Org ANSI C Emulation, version 0.4
[    33.875] (II) LoadModule: "extmod"
[    33.875] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    33.878] (II) Module extmod: vendor="X.Org Foundation"
[    33.878]    compiled for 1.12.3, module version = 1.0.0
[    33.878]    Module class: X.Org Server Extension
[    33.878]    ABI class: X.Org Server Extension, version 6.0
[    33.878] (II) Loading extension MIT-SCREEN-SAVER
[    33.878] (II) Loading extension XFree86-VidModeExtension
[    33.879] (II) Loading extension XFree86-DGA
[    33.879] (II) Loading extension DPMS
[    33.879] (II) Loading extension XVideo
[    33.879] (II) Loading extension XVideo-MotionCompensation
[    33.879] (II) Loading extension X-Resource
[    33.879] (II) LoadModule: "dbe"
[    33.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    33.881] (II) Module dbe: vendor="X.Org Foundation"
[    33.881]    compiled for 1.12.3, module version = 1.0.0
[    33.881]    Module class: X.Org Server Extension
[    33.881]    ABI class: X.Org Server Extension, version 6.0
[    33.881] (II) Loading extension DOUBLE-BUFFER
[    33.881] (II) LoadModule: "glx"
[    33.892] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    33.949] (II) Module glx: vendor="X.Org Foundation"
[    33.949]    compiled for 1.12.3, module version = 1.0.0
[    33.949]    ABI class: X.Org Server Extension, version 6.0
[    33.966] (==) AIGLX enabled
[    33.966] (II) Loading extension GLX
[    33.967] (II) LoadModule: "record"
[    33.967] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    33.977] (II) Module record: vendor="X.Org Foundation"
[    33.977]    compiled for 1.12.3, module version = 1.13.0
[    33.977]    Module class: X.Org Server Extension
[    33.977]    ABI class: X.Org Server Extension, version 6.0
[    33.977] (II) Loading extension RECORD
[    33.977] (II) LoadModule: "dri"
[    33.978] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    33.990] (II) Module dri: vendor="X.Org Foundation"
[    33.990]    compiled for 1.12.3, module version = 1.0.0
[    33.990]    ABI class: X.Org Server Extension, version 6.0
[    33.990] (II) Loading extension XFree86-DRI
[    33.990] (==) Matched nvidia as autoconfigured driver 0
[    33.990] (==) Matched nouveau as autoconfigured driver 1
[    33.990] (==) Matched nv as autoconfigured driver 2
[    33.990] (==) Matched fbdev as autoconfigured driver 3
[    33.990] (==) Matched vesa as autoconfigured driver 4
[    33.990] (==) Assigned the driver to the xf86ConfigLayout
[    33.990] (II) LoadModule: "nvidia"
[    34.025] (WW) Warning, couldn't open module nvidia
[    34.025] (II) UnloadModule: "nvidia"
[    34.025] (II) Unloading nvidia
[    34.025] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    34.025] (II) LoadModule: "nouveau"
[    34.026] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    37.722] (II) Module nouveau: vendor="X.Org Foundation"
[    37.722]    compiled for 1.12.3, module version = 0.0.16
[    37.722]    Module class: X.Org Video Driver
[    37.722]    ABI class: X.Org Video Driver, version 12.0
[    37.722] (II) LoadModule: "nv"
[    37.723] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[    38.418] (II) Module nv: vendor="X.Org Foundation"
[    38.418]    compiled for 1.12.3, module version = 2.1.18
[    38.418]    Module class: X.Org Video Driver
[    38.418]    ABI class: X.Org Video Driver, version 12.0
[    38.418] (II) LoadModule: "fbdev"
[    38.419] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    39.093] (II) Module fbdev: vendor="X.Org Foundation"
[    39.093]    compiled for 1.12.3, module version = 0.4.2
[    39.093]    ABI class: X.Org Video Driver, version 12.0
[    39.093] (II) LoadModule: "vesa"
[    39.094] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    39.596] (II) Module vesa: vendor="X.Org Foundation"
[    39.596]    compiled for 1.12.3, module version = 2.3.1
[    39.596]    Module class: X.Org Video Driver
[    39.596]    ABI class: X.Org Video Driver, version 12.0
[    39.596] (II) NOUVEAU driver
[    39.596] (II) NOUVEAU driver for NVIDIA chipset families :
[    39.596]    RIVA TNT        (NV04)
[    39.596]    RIVA TNT2       (NV05)
[    39.597]    GeForce 256     (NV10)
[    39.597]    GeForce 2       (NV11, NV15)
[    39.597]    GeForce 4MX     (NV17, NV18)
[    39.597]    GeForce 3       (NV20)
[    39.597]    GeForce 4Ti     (NV25, NV28)
[    39.597]    GeForce FX      (NV3x)
[    39.597]    GeForce 6       (NV4x)
[    39.597]    GeForce 7       (G7x)
[    39.597]    GeForce 8       (G8x)
[    39.597]    GeForce GTX 200 (NVA0)
[    39.598]    GeForce GTX 400 (NVC0)
[    39.598] (II) NOUVEAU driver
[    39.598] (II) NOUVEAU driver for NVIDIA chipset families :
[    39.598]    RIVA TNT        (NV04)
[    39.598]    RIVA TNT2       (NV05)
[    39.598]    GeForce 256     (NV10)
[    39.598]    GeForce 2       (NV11, NV15)
[    39.598]    GeForce 4MX     (NV17, NV18)
[    39.598]    GeForce 3       (NV20)
[    39.598]    GeForce 4Ti     (NV25, NV28)
[    39.598]    GeForce FX      (NV3x)
[    39.598]    GeForce 6       (NV4x)
[    39.598]    GeForce 7       (G7x)
[    39.598]    GeForce 8       (G8x)
[    39.598]    GeForce GTX 200 (NVA0)
[    39.598]    GeForce GTX 400 (NVC0)
[    39.599] (II) FBDEV: driver for framebuffer: fbdev
[    39.599] (II) VESA: driver for VESA chipsets: vesa
[    39.599] (++) using VT number 7

[    39.599] drmOpenDevice: node name is /dev/dri/card0
[    39.599] drmOpenDevice: open result is 8, (OK)
[    39.599] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    39.599] drmOpenDevice: node name is /dev/dri/card0
[    39.599] drmOpenDevice: open result is 8, (OK)
[    39.599] drmOpenByBusid: drmOpenMinor returns 8
[    39.599] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    39.599] (II) [drm] nouveau interface version: 1.0.0
[    39.600] (WW) Falling back to old probe method for fbdev
[    39.600] (II) Loading sub module "fbdevhw"
[    39.600] (II) LoadModule: "fbdevhw"
[    39.600] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    39.685] (II) Module fbdevhw: vendor="X.Org Foundation"
[    39.685]    compiled for 1.12.3, module version = 0.0.2
[    39.685]    ABI class: X.Org Video Driver, version 12.0
[    39.686] (WW) Falling back to old probe method for vesa
[    39.686] (II) Loading sub module "dri"
[    39.686] (II) LoadModule: "dri"
[    39.686] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    39.686] (II) Module dri: vendor="X.Org Foundation"
[    39.686]    compiled for 1.12.3, module version = 1.0.0
[    39.686]    ABI class: X.Org Server Extension, version 6.0
[    39.687] (II) NOUVEAU(0): Loaded DRI module
[    39.687] drmOpenDevice: node name is /dev/dri/card0
[    39.687] drmOpenDevice: open result is 9, (OK)
[    39.687] drmOpenDevice: node name is /dev/dri/card0
[    39.687] drmOpenDevice: open result is 9, (OK)
[    39.687] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    39.687] drmOpenDevice: node name is /dev/dri/card0
[    39.687] drmOpenDevice: open result is 9, (OK)
[    39.687] drmOpenByBusid: drmOpenMinor returns 9
[    39.687] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    39.687] (II) [drm] DRM interface version 1.4
[    39.687] (II) [drm] DRM open master succeeded.
[    39.687] (--) NOUVEAU(0): Chipset: "NVIDIA NV31"
[    39.687] (II) NOUVEAU(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    39.687] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    39.687] (==) NOUVEAU(0): RGB weight 888
[    39.687] (==) NOUVEAU(0): Default visual is TrueColor
[    39.687] (==) NOUVEAU(0): Using HW cursor
[    39.687] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    39.687] (==) NOUVEAU(0): Page flipping enabled
[    39.687] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    39.744] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    39.774] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    39.828] (II) NOUVEAU(0): Output TV-1 has no monitor section
[    39.884] (II) NOUVEAU(0): EDID for output VGA-1
[    39.914] (II) NOUVEAU(0): EDID for output DVI-I-1
[    39.914] (II) NOUVEAU(0): Manufacturer: ACR  Model: a0  Serial#: 2442152287
[    39.914] (II) NOUVEAU(0): Year: 2009  Week: 19
[    39.914] (II) NOUVEAU(0): EDID Version: 1.3
[    39.914] (II) NOUVEAU(0): Digital Display Input
[    39.914] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    39.914] (II) NOUVEAU(0): Gamma: 2.20
[    39.914] (II) NOUVEAU(0): DPMS capabilities: Off
[    39.914] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    39.914] (II) NOUVEAU(0): First detailed timing is preferred mode
[    39.914] (II) NOUVEAU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    39.914] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    39.914] (II) NOUVEAU(0): Supported established timings:
[    39.914] (II) NOUVEAU(0): 720x400@70Hz
[    39.914] (II) NOUVEAU(0): 640x480@60Hz
[    39.914] (II) NOUVEAU(0): 640x480@67Hz
[    39.914] (II) NOUVEAU(0): 800x600@56Hz
[    39.914] (II) NOUVEAU(0): 800x600@60Hz
[    39.914] (II) NOUVEAU(0): 1024x768@60Hz
[    39.914] (II) NOUVEAU(0): 1024x768@70Hz
[    39.914] (II) NOUVEAU(0): Manufacturer's mask: 0
[    39.914] (II) NOUVEAU(0): Supported standard timings:
[    39.914] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    39.914] (II) NOUVEAU(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    39.914] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    39.914] (II) NOUVEAU(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    39.914] (II) NOUVEAU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    39.914] (II) NOUVEAU(0): #5: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    39.915] (II) NOUVEAU(0): Supported detailed timing:
[    39.915] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[    39.915] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    39.915] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    39.915] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    39.915] (II) NOUVEAU(0): Monitor name: Acer H233H
[    39.915] (II) NOUVEAU(0): Serial No: LFS0W0104300
[    39.915] (II) NOUVEAU(0): EDID (in hex):
[    39.915] (II) NOUVEAU(0):    00ffffffffffff000472a0005f499091
[    39.915] (II) NOUVEAU(0):    1313010380331d782aee95a3544c9926
[    39.915] (II) NOUVEAU(0):    0f5054b30c00714f810081809500b300
[    39.915] (II) NOUVEAU(0):    d1c001010101023a801871382d40582c
[    39.915] (II) NOUVEAU(0):    4500fe1f1100001e000000fd00384b1e
[    39.915] (II) NOUVEAU(0):    5311000a202020202020000000fc0041
[    39.915] (II) NOUVEAU(0):    6365722048323333480a2020000000ff
[    39.915] (II) NOUVEAU(0):    004c46533057303130343330300a00d4
[    39.915] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    39.915] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    39.915] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    39.915] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    39.916] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    39.972] (II) NOUVEAU(0): EDID for output TV-1
[    39.972] (II) NOUVEAU(0): Output VGA-1 disconnected
[    39.972] (II) NOUVEAU(0): Output DVI-I-1 connected
[    39.972] (II) NOUVEAU(0): Output TV-1 disconnected
[    39.972] (II) NOUVEAU(0): Using exact sizes for initial modes
[    39.972] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[    39.972] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    39.972] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[    39.972] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[    39.972] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    39.972] (**) NOUVEAU(0):  Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[    39.972] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    39.972] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[    39.972] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz
[    39.972] (II) NOUVEAU(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    39.972] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    39.972] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    39.972] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    39.972] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    39.972] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    39.972] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    39.972] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    39.972] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    39.972] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    39.972] (==) NOUVEAU(0): DPI set to (96, 96)
[    39.972] (II) Loading sub module "fb"
[    39.972] (II) LoadModule: "fb"
[    39.973] (II) Loading /usr/lib/xorg/modules/libfb.so
[    41.958] (II) Module fb: vendor="X.Org Foundation"
[    41.958]    compiled for 1.12.3, module version = 1.0.0
[    41.958]    ABI class: X.Org ANSI C Emulation, version 0.4
[    41.958] (II) Loading sub module "exa"
[    41.958] (II) LoadModule: "exa"
[    41.959] (II) Loading /usr/lib/xorg/modules/libexa.so
[    42.504] (II) Module exa: vendor="X.Org Foundation"
[    42.504]    compiled for 1.12.3, module version = 2.5.0
[    42.504]    ABI class: X.Org Video Driver, version 12.0
[    42.504] (II) Loading sub module "shadowfb"
[    42.504] (II) LoadModule: "shadowfb"
[    42.505] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    43.020] (II) Module shadowfb: vendor="X.Org Foundation"
[    43.020]    compiled for 1.12.3, module version = 1.0.0
[    43.020]    ABI class: X.Org ANSI C Emulation, version 0.4
[    43.020] (II) UnloadModule: "nv"
[    43.020] (II) Unloading nv
[    43.021] (II) UnloadModule: "fbdev"
[    43.021] (II) Unloading fbdev
[    43.021] (II) UnloadSubModule: "fbdevhw"
[    43.021] (II) Unloading fbdevhw
[    43.021] (II) UnloadModule: "vesa"
[    43.021] (II) Unloading vesa
[    43.021] (--) Depth 24 pixmap format is 32 bpp
[    43.022] (II) NOUVEAU(0): Opened GPU channel 1
[    43.023] (II) NOUVEAU(0): [DRI2] Setup complete
[    43.023] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    43.023] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    43.023] (II) NOUVEAU(0): GART: 64MiB available
[    43.059] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[    43.061] (II) EXA(0): Driver allocated offscreen pixmaps
[    43.061] (II) EXA(0): Driver registered support for the following operations:
[    43.061] (II)         Solid
[    43.061] (II)         Copy
[    43.061] (II)         Composite (RENDER acceleration)
[    43.061] (II)         UploadToScreen
[    43.061] (II)         DownloadFromScreen
[    43.061] (==) NOUVEAU(0): Backing store disabled
[    43.061] (==) NOUVEAU(0): Silken mouse enabled
[    43.061] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
[    43.062] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    43.062] (==) NOUVEAU(0): DPMS enabled
[    43.062] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    43.062] (--) RandR disabled
[    43.062] (II) Initializing built-in extension Generic Event Extension
[    43.062] (II) Initializing built-in extension SHAPE
[    43.062] (II) Initializing built-in extension MIT-SHM
[    43.062] (II) Initializing built-in extension XInputExtension
[    43.062] (II) Initializing built-in extension XTEST
[    43.062] (II) Initializing built-in extension BIG-REQUESTS
[    43.062] (II) Initializing built-in extension SYNC
[    43.062] (II) Initializing built-in extension XKEYBOARD
[    43.062] (II) Initializing built-in extension XC-MISC
[    43.062] (II) Initializing built-in extension SECURITY
[    43.062] (II) Initializing built-in extension XINERAMA
[    43.062] (II) Initializing built-in extension XFIXES
[    43.062] (II) Initializing built-in extension RENDER
[    43.062] (II) Initializing built-in extension RANDR
[    43.062] (II) Initializing built-in extension COMPOSITE
[    43.062] (II) Initializing built-in extension DAMAGE
[    45.957] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    45.996] (II) AIGLX: enabled GLX_INTEL_swap_event
[    45.996] (II) AIGLX: enabled GLX_ARB_create_context
[    45.996] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    45.996] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    45.997] (II) AIGLX: Loaded and initialized nouveau
[    45.997] (II) GLX: Initialized DRI2 GL provider for screen 0
[    46.002] (II) NOUVEAU(0): NVEnterVT is called.
[    46.003] (II) NOUVEAU(0): Setting screen physical size to 507 x 285
[    46.003] resize called 1920 1080
[    46.380] (II) XKB: Reusing cached keymap
[    46.386] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    46.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    46.387] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    46.387] (**) Power Button: Applying InputClass "LocalKeyboard"
[    46.387] (II) LoadModule: "evdev"
[    46.388] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    46.391] (II) Module evdev: vendor="X.Org Foundation"
[    46.391]    compiled for 1.12.3, module version = 2.7.0
[    46.391]    Module class: X.Org XInput Driver
[    46.391]    ABI class: X.Org XInput driver, version 16.0
[    46.391] (II) Using input driver 'evdev' for 'Power Button'
[    46.391]    Option "XkbRules" "evdev"
[    46.391]    Option "XkbModel" "evdev"
[    46.391]    Option "XkbLayout" "us"
[    46.391]    Option "_source" "server/udev"
[    46.391]    Option "name" "Power Button"
[    46.391]    Option "path" "/dev/input/event1"
[    46.391]    Option "device" "/dev/input/event1"
[    46.391]    Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    46.391]    Option "driver" "evdev"
[    46.391] (**) Power Button: always reports core events
[    46.391] (**) evdev: Power Button: Device: "/dev/input/event1"
[    46.392] (--) evdev: Power Button: Vendor 0 Product 0x1
[    46.392] (--) evdev: Power Button: Found keys
[    46.392] (II) evdev: Power Button: Configuring as keyboard
[    46.392] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    46.392] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    46.392] (**) Option "xkb_rules" "evdev"
[    46.392] (**) Option "xkb_model" "evdev"
[    46.392] (**) Option "xkb_layout" "us"
[    46.486] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    46.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    46.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    46.487] (**) Power Button: Applying InputClass "LocalKeyboard"
[    46.487] (II) Using input driver 'evdev' for 'Power Button'
[    46.487]    Option "XkbRules" "evdev"
[    46.487]    Option "XkbModel" "evdev"
[    46.487]    Option "XkbLayout" "us"
[    46.487]    Option "_source" "server/udev"
[    46.487]    Option "name" "Power Button"
[    46.487]    Option "path" "/dev/input/event0"
[    46.487]    Option "device" "/dev/input/event0"
[    46.487]    Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    46.487]    Option "driver" "evdev"
[    46.487] (**) Power Button: always reports core events
[    46.487] (**) evdev: Power Button: Device: "/dev/input/event0"
[    46.487] (--) evdev: Power Button: Vendor 0 Product 0x1
[    46.487] (--) evdev: Power Button: Found keys
[    46.487] (II) evdev: Power Button: Configuring as keyboard
[    46.487] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    46.487] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    46.487] (**) Option "xkb_rules" "evdev"
[    46.487] (**) Option "xkb_model" "evdev"
[    46.487] (**) Option "xkb_layout" "us"
[    46.487] (II) XKB: Reusing cached keymap
[    46.489] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event2)
[    46.489] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[    46.489] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[    46.489] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[    46.489]    Option "XkbRules" "evdev"
[    46.489]    Option "XkbModel" "evdev"
[    46.489]    Option "XkbLayout" "us"
[    46.489]    Option "_source" "server/udev"
[    46.489]    Option "name" "Logitech USB Laser Mouse"
[    46.489]    Option "path" "/dev/input/event2"
[    46.489]    Option "device" "/dev/input/event2"
[    46.489]    Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2/event2"
[    46.489]    Option "driver" "evdev"
[    46.489] (**) Logitech USB Laser Mouse: always reports core events
[    46.489] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event2"
[    46.489] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc069
[    46.489] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[    46.489] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[    46.489] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[    46.489] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[    46.489] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[    46.489] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[    46.489] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[    46.489] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    46.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2/event2"
[    46.490] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id
[    46.490] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[    46.491] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[    46.491] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[    46.491] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[    46.491] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[    46.493] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[    46.493] (II) No input driver specified, ignoring this device.
[    46.493] (II) This device may have been added with another device file.
[    46.494] (II) config/udev: Adding input device HID 0430:0005 (/dev/input/event3)
[    46.494] (**) HID 0430:0005: Applying InputClass "evdev keyboard catchall"
[    46.494] (**) HID 0430:0005: Applying InputClass "evdev keyboard catchall"
[    46.494] (**) HID 0430:0005: Applying InputClass "LocalKeyboard"
[    46.494] (II) Using input driver 'evdev' for 'HID 0430:0005'
[    46.494]    Option "XkbRules" "evdev"
[    46.494]    Option "XkbModel" "evdev"
[    46.494]    Option "XkbLayout" "us"
[    46.494]    Option "_source" "server/udev"
[    46.494]    Option "name" "HID 0430:0005"
[    46.494]    Option "path" "/dev/input/event3"
[    46.494]    Option "device" "/dev/input/event3"
[    46.494]    Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3/event3"
[    46.494]    Option "driver" "evdev"
[    46.495] (**) HID 0430:0005: always reports core events
[    46.495] (**) evdev: HID 0430:0005: Device: "/dev/input/event3"
[    46.495] (--) evdev: HID 0430:0005: Vendor 0x430 Product 0x5
[    46.495] (--) evdev: HID 0430:0005: Found keys
[    46.495] (II) evdev: HID 0430:0005: Configuring as keyboard
[    46.495] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3/event3"
[    46.495] (II) XINPUT: Adding extended input device "HID 0430:0005" (type: KEYBOARD, id 9)
[    46.495] (**) Option "xkb_rules" "evdev"
[    46.495] (**) Option "xkb_model" "evdev"
[    46.495] (**) Option "xkb_layout" "us"
[    46.495] (II) XKB: Reusing cached keymap
[    46.498] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    46.498] (II) No input driver specified, ignoring this device.
[    46.498] (II) This device may have been added with another device file.
[    46.622] (II) NOUVEAU(0): EDID vendor "ACR", prod id 160
[    46.622] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    46.622] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    46.622] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    46.622] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    46.622] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    46.622] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    46.622] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    46.622] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    46.622] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    46.622] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   

[свернуть]

[ogost]

lspci | grep -i vga

[Fang]

01:00.0 VGA compatible controller: NVIDIA Corporation NV31 [GeForce FX 5600] (rev a1)

[ogost]

пакет nvidia-glx-legacy-173xx из non-free, не?
Сообщение объединено: 19 марта 2013, 09:16:35
хотя вы же на семерке.
воть энтот пробовали? xserver-xorg-video-nvidia-legacy-173xx, опять же из non-free.

[Fang]

воть энтот пробовали? xserver-xorg-video-nvidia-legacy-173xx, опять же из non-free.

пробывал не работает /экран в квадратах наверно место положения иконок?/ сейчас стоит родной Nvidia driver ... не понятно где смотреть ошибки / открыл xterm в gnome3 ...уходит 5 мин на это ..
запустил top ... CPU занят где то 20 % - 40 % / в интернете не нашел как проверить шаг за шагом работу gnoma 3  .....

Сообщение объединено: 19 марта 2013, 12:33:39
ставил по этой  методе
http://www.cyberciti.biz/howto/debian-linux/install-nvidia-proprietary-unix-driver/

[ogost]

посмотрите здесь:

$HOME/.xsession-errors
/var/log/messages

а так же
lspci -v покажет вам какое железо и какие дрова к нему.
можете даже сравнить вывод с сюсей и посмотреть какие дрова у него стоят.

я так же сильно подозреваю, что поддержку вашей карточки убрали из дров, указанных по вашей ссылке, но я не уверен, нужно проверять.
Сообщение объединено: 19 марта 2013, 13:15:47
кажется вот дрова для вашей карточки.

[Fang]

зашел по ssh посмотрел топ ... 80% CPU жрет gnome-shell
да этот driver  и стоит у меня
01:00.0 VGA compatible controller: NVIDIA Corporation NV31 [GeForce FX 5600] (rev a1) (prog-if 00 [VGA controller])
   Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
   Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
   Memory at e0000000 (32-bit, prefetchable) [size=256M]
   [virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
   Capabilities: [60] Power Management version 2
   Capabilities: [44] AGP version 3.0
   Kernel driver in use: nvidia


Сообщение объединено: 20 марта 2013, 01:22:22
$HOME/.xsession-errors

Открыть содержимое (спойлер)

/etc/gdm3/Xsession: Beginning session setup...
localuser:yuriy being added to access control list
openConnection: connect: No such file or directory
cannot connect to brltty at :0
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
GNOME_KEYRING_CONTROL=/home/yuriy/.cache/keyring-vE8AVI
GNOME_KEYRING_CONTROL=/home/yuriy/.cache/keyring-vE8AVI
SSH_AUTH_SOCK=/home/yuriy/.cache/keyring-vE8AVI/ssh
GNOME_KEYRING_CONTROL=/home/yuriy/.cache/keyring-vE8AVI
SSH_AUTH_SOCK=/home/yuriy/.cache/keyring-vE8AVI/ssh
GPG_AGENT_INFO=/home/yuriy/.cache/keyring-vE8AVI/gpg:0:1
GNOME_KEYRING_CONTROL=/home/yuriy/.cache/keyring-vE8AVI
SSH_AUTH_SOCK=/home/yuriy/.cache/keyring-vE8AVI/ssh
GPG_AGENT_INFO=/home/yuriy/.cache/keyring-vE8AVI/gpg:0:1

(gnome-settings-daemon:3467): color-plugin-WARNING **: failed to get edid: unable to get EDID for output

(gnome-settings-daemon:3467): color-plugin-WARNING **: unable to get EDID for xrandr-default: unable to get EDID for output

(gnome-settings-daemon:3467): color-plugin-WARNING **: failed to reset xrandr-default gamma tables: gamma size is zero
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/yuriy/.config/tracker/tracker-store.cfg'
Initializing tracker-miner-fs...
Tracker-Message: Setting up monitor for changes to config file:'/home/yuriy/.config/tracker/tracker-miner-fs.cfg'
** Message: applet now removed from the notification area
Initializing nautilus-gdu extension
Traceback (most recent call last):
  File "/usr/bin/guake", line 1422, in <module>
    if not main():
  File "/usr/bin/guake", line 1365, in main
    instance = Guake()
  File "/usr/bin/guake", line 653, in __init__
    notification.show()
glib.GError: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface `org.freedesktop.Notifications' on object at path /org/freedesktop/Notifications

** (nautilus:3542): WARNING **: Can not determine workarea, guessing at layout
Starting log:
  File:'/home/yuriy/.local/share/tracker/tracker-miner-fs.log'
Tracker-Message: Setting up monitor for changes to config file:'/home/yuriy/.config/tracker/tracker-store.cfg'
Starting log:
  File:'/home/yuriy/.local/share/tracker/tracker-store.log'

** (nm-applet:3538): WARNING **: Could not find ShellVersion property on org.gnome.Shell after 5 tries
** Message: applet now embedded in the notification area
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus 0x1e00004 (Desktop) with a timestamp of 0.  This shouldn't happen!
Window manager warning: Log level 16: NOTE: Not using GLX TFP!

Window manager warning: Log level 16: NOTE: Not using GLX TFP!


(gnome-settings-daemon:3467): PackageKit-WARNING **: couldn't parse execption 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4: GetDistroUpgrades not supported by backend', please report

(gnome-settings-daemon:3467): updates-plugin-WARNING **: failed to get upgrades: GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4: GetDistroUpgrades not supported by backend

[свернуть]

Сообщение объединено: 20 марта 2013, 01:39:47
messages

Открыть содержимое (спойлер)

Mar 19 14:16:33 debian kernel: [  693.572289] colord-sane[3668]: segfault at 4 ip b71e2472 sp b561ffb8 error 6 in libdbus-1.so.3.7.2[b71b7000+49000]
Mar 19 14:17:18 debian kernel: imklog 5.8.11, log source = /proc/kmsg started.
Mar 19 14:17:18 debian rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2145" x-info="http://www.rsyslog.com"] start
Mar 19 14:17:18 debian kernel: [    0.000000] Initializing cgroup subsys cpuset
Mar 19 14:17:18 debian kernel: [    0.000000] Initializing cgroup subsys cpu
Mar 19 14:17:18 debian kernel: [    0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2
Mar 19 14:17:18 debian kernel: [    0.000000] BIOS-provided physical RAM map:
Mar 19 14:17:18 debian kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 19 14:17:18 debian kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 19 14:17:18 debian kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Mar 19 14:17:18 debian kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000005ffd0000 (usable)
Mar 19 14:17:18 debian kernel: [    0.000000]  BIOS-e820: 000000005ffd0000 - 000000005ffdf000 (ACPI data)
Mar 19 14:17:18 debian kernel: [    0.000000]  BIOS-e820: 000000005ffdf000 - 0000000060000000 (ACPI NVS)
Mar 19 14:17:18 debian kernel: [    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Mar 19 14:17:18 debian kernel: [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
Mar 19 14:17:18 debian kernel: [    0.000000] SMBIOS 2.3 present.
Mar 19 14:17:18 debian kernel: [    0.000000] last_pfn = 0x5ffd0 max_arch_pfn = 0x1000000
Mar 19 14:17:18 debian kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mar 19 14:17:18 debian kernel: [    0.000000] found SMP MP-table at [c00ff780] ff780
Mar 19 14:17:18 debian kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
Mar 19 14:17:18 debian kernel: [    0.000000] RAMDISK: 36ca6000 - 3764b000
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: RSDP 000f53e0 00014 (v00 ACPIAM)
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: RSDT 5ffd0000 00030 (v01 A M I  OEMRSDT  09000414 MSFT 00000097)
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: FACP 5ffd0200 00081 (v02 A M I  OEMFACP  09000414 MSFT 00000097)
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: DSDT 5ffd03f0 03191 (v01  A0062 A0062001 00000001 INTL 02002026)
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: FACS 5ffdf000 00040
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: APIC 5ffd0390 0005C (v01 A M I  OEMAPIC  09000414 MSFT 00000097)
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: OEMB 5ffdf040 0003F (v01 A M I  OEMBIOS  09000414 MSFT 00000097)
Mar 19 14:17:18 debian kernel: [    0.000000] 645MB HIGHMEM available.
Mar 19 14:17:18 debian kernel: [    0.000000] 889MB LOWMEM available.
Mar 19 14:17:18 debian kernel: [    0.000000]   mapped low ram: 0 - 379fe000
Mar 19 14:17:18 debian kernel: [    0.000000]   low ram: 0 - 379fe000
Mar 19 14:17:18 debian kernel: [    0.000000] Zone PFN ranges:
Mar 19 14:17:18 debian kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Mar 19 14:17:18 debian kernel: [    0.000000]   Normal   0x00001000 -> 0x000379fe
Mar 19 14:17:18 debian kernel: [    0.000000]   HighMem  0x000379fe -> 0x0005ffd0
Mar 19 14:17:18 debian kernel: [    0.000000] Movable zone start PFN for each node
Mar 19 14:17:18 debian kernel: [    0.000000] early_node_map[2] active PFN ranges
Mar 19 14:17:18 debian kernel: [    0.000000]     0: 0x00000010 -> 0x0000009f
Mar 19 14:17:18 debian kernel: [    0.000000]     0: 0x00000100 -> 0x0005ffd0
Mar 19 14:17:18 debian kernel: [    0.000000] Using APIC driver default
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x808
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar 19 14:17:18 debian kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 19 14:17:18 debian kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 19 14:17:18 debian kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Mar 19 14:17:18 debian kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Mar 19 14:17:18 debian kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 19 14:17:18 debian kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Mar 19 14:17:18 debian kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Mar 19 14:17:18 debian kernel: [    0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9fb80000)
Mar 19 14:17:18 debian kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Mar 19 14:17:18 debian kernel: [    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
Mar 19 14:17:18 debian kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @f79d8000 s33280 r0 d24064 u57344
Mar 19 14:17:18 debian kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 389983
Mar 19 14:17:18 debian kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=1f68b739-e776-4276-81c2-4a83d10334cf ro initrd=/install/gtk/initrd.gz quiet
Mar 19 14:17:18 debian kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Mar 19 14:17:18 debian kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 19 14:17:18 debian kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 19 14:17:18 debian kernel: [    0.000000] Initializing CPU#0
Mar 19 14:17:18 debian kernel: [    0.000000] Initializing HighMem for node 0 (000379fe:0005ffd0)
Mar 19 14:17:18 debian kernel: [    0.000000] Memory: 1543832k/1572672k available (2847k kernel code, 28388k reserved, 1352k data, 416k init, 661320k highmem)
Mar 19 14:17:18 debian kernel: [    0.000000] virtual kernel memory layout:
Mar 19 14:17:18 debian kernel: [    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
Mar 19 14:17:18 debian kernel: [    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
Mar 19 14:17:18 debian kernel: [    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
Mar 19 14:17:18 debian kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
Mar 19 14:17:18 debian kernel: [    0.000000]       .init : 0xc141a000 - 0xc1482000   ( 416 kB)
Mar 19 14:17:18 debian kernel: [    0.000000]       .data : 0xc12c7d40 - 0xc1419fc0   (1352 kB)
Mar 19 14:17:18 debian kernel: [    0.000000]       .text : 0xc1000000 - 0xc12c7d40   (2847 kB)
Mar 19 14:17:18 debian kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Mar 19 14:17:18 debian kernel: [    0.000000] Hierarchical RCU implementation.
Mar 19 14:17:18 debian kernel: [    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
Mar 19 14:17:18 debian kernel: [    0.000000] NR_IRQS:2304 nr_irqs:512 16
Mar 19 14:17:18 debian kernel: [    0.000000] Console: colour VGA+ 80x25
Mar 19 14:17:18 debian kernel: [    0.000000] console [tty0] enabled
Mar 19 14:17:18 debian kernel: [    0.000000] Fast TSC calibration using PIT
Mar 19 14:17:18 debian kernel: [    0.000000] Detected 2992.249 MHz processor.
Mar 19 14:17:18 debian kernel: [    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.49 BogoMIPS (lpj=11968996)
Mar 19 14:17:18 debian kernel: [    0.004009] pid_max: default: 32768 minimum: 301
Mar 19 14:17:18 debian kernel: [    0.004066] Security Framework initialized
Mar 19 14:17:18 debian kernel: [    0.004075] AppArmor: AppArmor disabled by boot time parameter
Mar 19 14:17:18 debian kernel: [    0.004097] Mount-cache hash table entries: 512
Mar 19 14:17:18 debian kernel: [    0.004280] Initializing cgroup subsys cpuacct
Mar 19 14:17:18 debian kernel: [    0.004287] Initializing cgroup subsys memory
Mar 19 14:17:18 debian kernel: [    0.004300] Initializing cgroup subsys devices
Mar 19 14:17:18 debian kernel: [    0.004304] Initializing cgroup subsys freezer
Mar 19 14:17:18 debian kernel: [    0.004306] Initializing cgroup subsys net_cls
Mar 19 14:17:18 debian kernel: [    0.004310] Initializing cgroup subsys blkio
Mar 19 14:17:18 debian kernel: [    0.004319] Initializing cgroup subsys perf_event
Mar 19 14:17:18 debian kernel: [    0.004368] CPU: Physical Processor ID: 0
Mar 19 14:17:18 debian kernel: [    0.004372] CPU: Processor Core ID: 0
Mar 19 14:17:18 debian kernel: [    0.004376] mce: CPU supports 4 MCE banks
Mar 19 14:17:18 debian kernel: [    0.004391] CPU0: Thermal monitoring enabled (TM1)
Mar 19 14:17:18 debian kernel: [    0.004397] using mwait in idle threads.
Mar 19 14:17:18 debian kernel: [    0.005033] ACPI: Core revision 20110623
Mar 19 14:17:18 debian kernel: [    0.008428] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Mar 19 14:17:18 debian kernel: [    0.008771] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 19 14:17:18 debian kernel: [    0.048463] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
Mar 19 14:17:18 debian kernel: [    0.052002] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
Mar 19 14:17:18 debian kernel: [    0.052002] ... version:                0
Mar 19 14:17:18 debian kernel: [    0.052002] ... bit width:              40
Mar 19 14:17:18 debian kernel: [    0.052002] ... generic registers:      18
Mar 19 14:17:18 debian kernel: [    0.052002] ... value mask:             000000ffffffffff
Mar 19 14:17:18 debian kernel: [    0.052002] ... max period:             0000007fffffffff
Mar 19 14:17:18 debian kernel: [    0.052002] ... fixed-purpose events:   0
Mar 19 14:17:18 debian kernel: [    0.052002] ... event mask:             000000000003ffff
Mar 19 14:17:18 debian kernel: [    0.052002] NMI watchdog enabled, takes one hw-pmu counter.
Mar 19 14:17:18 debian kernel: [    0.052002] Booting Node   0, Processors  #1 Ok.
Mar 19 14:17:18 debian kernel: [    0.008000] Initializing CPU#1
Mar 19 14:17:18 debian kernel: [    0.140053] NMI watchdog enabled, takes one hw-pmu counter.
Mar 19 14:17:18 debian kernel: [    0.140113] Brought up 2 CPUs
Mar 19 14:17:18 debian kernel: [    0.140119] Total of 2 processors activated (11969.86 BogoMIPS).
Mar 19 14:17:18 debian kernel: [    0.141189] devtmpfs: initialized
Mar 19 14:17:18 debian kernel: [    0.141189] PM: Registering ACPI NVS region at 5ffdf000 (135168 bytes)
Mar 19 14:17:18 debian kernel: [    0.141189] print_constraints: dummy:
Mar 19 14:17:18 debian kernel: [    0.141189] NET: Registered protocol family 16
Mar 19 14:17:18 debian kernel: [    0.141189] ACPI: bus type pci registered
Mar 19 14:17:18 debian kernel: [    0.141189] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
Mar 19 14:17:18 debian kernel: [    0.141189] PCI: Using configuration type 1 for base access
Mar 19 14:17:18 debian kernel: [    0.141695] bio: create slab <bio-0> at 0
Mar 19 14:17:18 debian kernel: [    0.141695] ACPI: Added _OSI(Module Device)
Mar 19 14:17:18 debian kernel: [    0.141695] ACPI: Added _OSI(Processor Device)
Mar 19 14:17:18 debian kernel: [    0.141695] ACPI: Added _OSI(3.0 _SCP Extensions)
Mar 19 14:17:18 debian kernel: [    0.141695] ACPI: Added _OSI(Processor Aggregator Device)
Mar 19 14:17:18 debian kernel: [    0.146107] ACPI: Executed 1 blocks of module-level executable AML code
Mar 19 14:17:18 debian kernel: [    0.148432] ACPI: Interpreter enabled
Mar 19 14:17:18 debian kernel: [    0.148451] ACPI: (supports S0 S1 S3 S4 S5)
Mar 19 14:17:18 debian kernel: [    0.148488] ACPI: Using IOAPIC for interrupt routing
Mar 19 14:17:18 debian kernel: [    0.156329] ACPI: No dock devices found.
Mar 19 14:17:18 debian kernel: [    0.156333] HEST: Table not found.
Mar 19 14:17:18 debian kernel: [    0.156341] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Mar 19 14:17:18 debian kernel: [    0.156440] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Mar 19 14:17:18 debian kernel: [    0.156690] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
Mar 19 14:17:18 debian kernel: [    0.158016] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Mar 19 14:17:18 debian kernel: [    0.158418] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
Mar 19 14:17:18 debian kernel: [    0.158778]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
Mar 19 14:17:18 debian kernel: [    0.165345] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Mar 19 14:17:18 debian kernel: [    0.165432] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Mar 19 14:17:18 debian kernel: [    0.165515] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mar 19 14:17:18 debian kernel: [    0.165598] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Mar 19 14:17:18 debian kernel: [    0.165681] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mar 19 14:17:18 debian kernel: [    0.165763] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 19 14:17:18 debian kernel: [    0.165848] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 19 14:17:18 debian kernel: [    0.165933] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 19 14:17:18 debian kernel: [    0.166099] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Mar 19 14:17:18 debian kernel: [    0.166099] vgaarb: loaded
Mar 19 14:17:18 debian kernel: [    0.166099] vgaarb: bridge control possible 0000:01:00.0
Mar 19 14:17:18 debian kernel: [    0.166099] PCI: Using ACPI for IRQ routing
Mar 19 14:17:18 debian kernel: [    0.166099] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Mar 19 14:17:18 debian kernel: [    0.166099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Mar 19 14:17:18 debian kernel: [    0.166099] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Mar 19 14:17:18 debian kernel: [    0.172160] Switching to clocksource hpet
Mar 19 14:17:18 debian kernel: [    0.174878] pnp: PnP ACPI init
Mar 19 14:17:18 debian kernel: [    0.174904] ACPI: bus type pnp registered
Mar 19 14:17:18 debian kernel: [    0.177531] system 00:08: [io  0x0680-0x06ff] has been reserved
Mar 19 14:17:18 debian kernel: [    0.177536] system 00:08: [io  0x0290-0x0297] has been reserved
Mar 19 14:17:18 debian kernel: [    0.177811] system 00:09: [io  0x04d0-0x04d1] has been reserved
Mar 19 14:17:18 debian kernel: [    0.177816] system 00:09: [io  0x0800-0x087f] has been reserved
Mar 19 14:17:18 debian kernel: [    0.177820] system 00:09: [io  0x0480-0x04bf] has been reserved
Mar 19 14:17:18 debian kernel: [    0.177825] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
Mar 19 14:17:18 debian kernel: [    0.177829] system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved
Mar 19 14:17:18 debian kernel: [    0.178003] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
Mar 19 14:17:18 debian kernel: [    0.178008] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
Mar 19 14:17:18 debian kernel: [    0.178265] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
Mar 19 14:17:18 debian kernel: [    0.178270] system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved
Mar 19 14:17:18 debian kernel: [    0.178274] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
Mar 19 14:17:18 debian kernel: [    0.178279] system 00:0b: [mem 0x00100000-0x5fffffff] could not be reserved
Mar 19 14:17:18 debian kernel: [    0.178283] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
Mar 19 14:17:18 debian kernel: [    0.178513] pnp: PnP ACPI: found 12 devices
Mar 19 14:17:18 debian kernel: [    0.178516] ACPI: ACPI bus type pnp unregistered
Mar 19 14:17:18 debian kernel: [    0.178522] PnPBIOS: Disabled by ACPI PNP
Mar 19 14:17:18 debian kernel: [    0.217899] pci 0000:00:1f.1: BAR 5: assigned [mem 0x60000000-0x600003ff]
Mar 19 14:17:18 debian kernel: [    0.217907] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Mar 19 14:17:18 debian kernel: [    0.217914] pci 0000:00:01.0:   bridge window [mem 0xfc900000-0xfe9fffff]
Mar 19 14:17:18 debian kernel: [    0.217920] pci 0000:00:01.0:   bridge window [mem 0xd7f00000-0xf7efffff pref]
Mar 19 14:17:18 debian kernel: [    0.217928] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
Mar 19 14:17:18 debian kernel: [    0.217932] pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
Mar 19 14:17:18 debian kernel: [    0.217939] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
Mar 19 14:17:18 debian kernel: [    0.218095] NET: Registered protocol family 2
Mar 19 14:17:18 debian kernel: [    0.218198] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 19 14:17:18 debian kernel: [    0.218615] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Mar 19 14:17:18 debian kernel: [    0.219290] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Mar 19 14:17:18 debian kernel: [    0.219771] TCP: Hash tables configured (established 131072 bind 65536)
Mar 19 14:17:18 debian kernel: [    0.219775] TCP reno registered
Mar 19 14:17:18 debian kernel: [    0.219780] UDP hash table entries: 512 (order: 2, 16384 bytes)
Mar 19 14:17:18 debian kernel: [    0.219799] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Mar 19 14:17:18 debian kernel: [    0.220038] NET: Registered protocol family 1
Mar 19 14:17:18 debian kernel: [    0.220277] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
Mar 19 14:17:18 debian kernel: [    0.220393] Unpacking initramfs...
Mar 19 14:17:18 debian kernel: [    0.587677] Freeing initrd memory: 9876k freed
Mar 19 14:17:18 debian kernel: [    0.598550] audit: initializing netlink socket (disabled)
Mar 19 14:17:18 debian kernel: [    0.598573] type=2000 audit(1363724226.592:1): initialized
Mar 19 14:17:18 debian kernel: [    0.616589] highmem bounce pool size: 64 pages
Mar 19 14:17:18 debian kernel: [    0.616598] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Mar 19 14:17:18 debian kernel: [    0.617228] VFS: Disk quotas dquot_6.5.2
Mar 19 14:17:18 debian kernel: [    0.617280] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 19 14:17:18 debian kernel: [    0.617387] msgmni has been set to 1742
Mar 19 14:17:18 debian kernel: [    0.617674] alg: No test for stdrng (krng)
Mar 19 14:17:18 debian kernel: [    0.617731] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 19 14:17:18 debian kernel: [    0.617737] io scheduler noop registered
Mar 19 14:17:18 debian kernel: [    0.617740] io scheduler deadline registered
Mar 19 14:17:18 debian kernel: [    0.617762] io scheduler cfq registered (default)
Mar 19 14:17:18 debian kernel: [    0.617941] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 19 14:17:18 debian kernel: [    0.617977] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Mar 19 14:17:18 debian kernel: [    0.617980] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mar 19 14:17:18 debian kernel: [    0.618379] ERST: Table is not found!
Mar 19 14:17:18 debian kernel: [    0.618382] GHES: HEST is not enabled!
Mar 19 14:17:18 debian kernel: [    0.618404] isapnp: Scanning for PnP cards...
Mar 19 14:17:18 debian kernel: [    0.972181] isapnp: No Plug & Play device found
Mar 19 14:17:18 debian kernel: [    0.972295] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Mar 19 14:17:18 debian kernel: [    0.976498] Linux agpgart interface v0.103
Mar 19 14:17:18 debian kernel: [    0.976752] agpgart-intel 0000:00:00.0: Intel 865 Chipset
Mar 19 14:17:18 debian kernel: [    0.980089] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
Mar 19 14:17:18 debian kernel: [    0.980334] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
Mar 19 14:17:18 debian kernel: [    0.980338] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
Mar 19 14:17:18 debian kernel: [    0.982731] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 19 14:17:18 debian kernel: [    0.982744] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 19 14:17:18 debian kernel: [    0.982991] mousedev: PS/2 mouse device common for all mice
Mar 19 14:17:18 debian kernel: [    0.983066] rtc_cmos 00:02: RTC can wake from S4
Mar 19 14:17:18 debian kernel: [    0.983217] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Mar 19 14:17:18 debian kernel: [    0.983243] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
Mar 19 14:17:18 debian kernel: [    0.983262] cpuidle: using governor ladder
Mar 19 14:17:18 debian kernel: [    0.983265] cpuidle: using governor menu
Mar 19 14:17:18 debian kernel: [    0.983611] TCP cubic registered
Mar 19 14:17:18 debian kernel: [    0.983677] NET: Registered protocol family 10
Mar 19 14:17:18 debian kernel: [    0.984527] Mobile IPv6
Mar 19 14:17:18 debian kernel: [    0.984532] NET: Registered protocol family 17
Mar 19 14:17:18 debian kernel: [    0.984538] Registering the dns_resolver key type
Mar 19 14:17:18 debian kernel: [    0.984567] Using IPI No-Shortcut mode
Mar 19 14:17:18 debian kernel: [    0.984793] registered taskstats version 1
Mar 19 14:17:18 debian kernel: [    0.985241] rtc_cmos 00:02: setting system clock to 2013-03-19 20:17:07 UTC (1363724227)
Mar 19 14:17:18 debian kernel: [    0.985292] Initializing network drop monitor service
Mar 19 14:17:18 debian kernel: [    0.985387] Freeing unused kernel memory: 416k freed
Mar 19 14:17:18 debian kernel: [    0.985793] Write protecting the kernel text: 2848k
Mar 19 14:17:18 debian kernel: [    0.985844] Write protecting the kernel read-only data: 1092k
Mar 19 14:17:18 debian kernel: [    1.078231] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Mar 19 14:17:18 debian kernel: [    1.078238] e100: Copyright(c) 1999-2006 Intel Corporation
Mar 19 14:17:18 debian kernel: [    1.095617] usbcore: registered new interface driver usbfs
Mar 19 14:17:18 debian kernel: [    1.095664] usbcore: registered new interface driver hub
Mar 19 14:17:18 debian kernel: [    1.099689] usbcore: registered new device driver usb
Mar 19 14:17:18 debian kernel: [    1.100517] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 19 14:17:18 debian kernel: [    1.100590] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.100632] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Mar 19 14:17:18 debian kernel: [    1.100675] ehci_hcd 0000:00:1d.7: debug port 1
Mar 19 14:17:18 debian kernel: [    1.104612] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
Mar 19 14:17:18 debian kernel: [    1.118843] SCSI subsystem initialized
Mar 19 14:17:18 debian kernel: [    1.124316] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Mar 19 14:17:18 debian kernel: [    1.124377] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Mar 19 14:17:18 debian kernel: [    1.124385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 19 14:17:18 debian kernel: [    1.124391] usb usb1: Product: EHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.124395] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
Mar 19 14:17:18 debian kernel: [    1.124400] usb usb1: SerialNumber: 0000:00:1d.7
Mar 19 14:17:18 debian kernel: [    1.124735] hub 1-0:1.0: USB hub found
Mar 19 14:17:18 debian kernel: [    1.124751] hub 1-0:1.0: 8 ports detected
Mar 19 14:17:18 debian kernel: [    1.132382] uhci_hcd: USB Universal Host Controller Interface driver
Mar 19 14:17:18 debian kernel: [    1.132478] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.132500] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Mar 19 14:17:18 debian kernel: [    1.132554] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
Mar 19 14:17:18 debian kernel: [    1.132622] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Mar 19 14:17:18 debian kernel: [    1.132628] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 19 14:17:18 debian kernel: [    1.132633] usb usb2: Product: UHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.132637] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
Mar 19 14:17:18 debian kernel: [    1.132641] usb usb2: SerialNumber: 0000:00:1d.0
Mar 19 14:17:18 debian kernel: [    1.140217] e100 0000:02:08.0: eth0: addr 0xfeaff000, irq 20, MAC addr 00:11:2f:19:8b:54
Mar 19 14:17:18 debian kernel: [    1.143152] hub 2-0:1.0: USB hub found
Mar 19 14:17:18 debian kernel: [    1.143169] hub 2-0:1.0: 2 ports detected
Mar 19 14:17:18 debian kernel: [    1.143398] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.143421] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Mar 19 14:17:18 debian kernel: [    1.143485] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
Mar 19 14:17:18 debian kernel: [    1.143564] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Mar 19 14:17:18 debian kernel: [    1.143572] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 19 14:17:18 debian kernel: [    1.143578] usb usb3: Product: UHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.143582] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
Mar 19 14:17:18 debian kernel: [    1.143586] usb usb3: SerialNumber: 0000:00:1d.1
Mar 19 14:17:18 debian kernel: [    1.148869] hub 3-0:1.0: USB hub found
Mar 19 14:17:18 debian kernel: [    1.148886] hub 3-0:1.0: 2 ports detected
Mar 19 14:17:18 debian kernel: [    1.149110] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.149132] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Mar 19 14:17:18 debian kernel: [    1.149194] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
Mar 19 14:17:18 debian kernel: [    1.149270] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Mar 19 14:17:18 debian kernel: [    1.149278] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 19 14:17:18 debian kernel: [    1.149284] usb usb4: Product: UHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.149289] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
Mar 19 14:17:18 debian kernel: [    1.149294] usb usb4: SerialNumber: 0000:00:1d.2
Mar 19 14:17:18 debian kernel: [    1.153113] hub 4-0:1.0: USB hub found
Mar 19 14:17:18 debian kernel: [    1.153130] hub 4-0:1.0: 2 ports detected
Mar 19 14:17:18 debian kernel: [    1.153375] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.153401] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Mar 19 14:17:18 debian kernel: [    1.153449] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
Mar 19 14:17:18 debian kernel: [    1.153534] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Mar 19 14:17:18 debian kernel: [    1.153541] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 19 14:17:18 debian kernel: [    1.153547] usb usb5: Product: UHCI Host Controller
Mar 19 14:17:18 debian kernel: [    1.153551] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
Mar 19 14:17:18 debian kernel: [    1.153556] usb usb5: SerialNumber: 0000:00:1d.3
Mar 19 14:17:18 debian kernel: [    1.158176] hub 5-0:1.0: USB hub found
Mar 19 14:17:18 debian kernel: [    1.158190] hub 5-0:1.0: 2 ports detected
Mar 19 14:17:18 debian kernel: [    1.163660] Floppy drive(s): fd0 is 1.44M
Mar 19 14:17:18 debian kernel: [    1.168996] scsi0 : ata_piix
Mar 19 14:17:18 debian kernel: [    1.169282] scsi1 : ata_piix
Mar 19 14:17:18 debian kernel: [    1.172606] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Mar 19 14:17:18 debian kernel: [    1.172615] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Mar 19 14:17:18 debian kernel: [    1.186419] FDC 0 is a post-1991 82077
Mar 19 14:17:18 debian kernel: [    1.196112] firewire_ohci: Added fw-ohci device 0000:02:0e.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
Mar 19 14:17:18 debian kernel: [    1.355414] ata1.00: ATA-7: WDC WD1600AAJB-00PVA0, 00.07H00, max UDMA/100
Mar 19 14:17:18 debian kernel: [    1.355420] ata1.00: 312581808 sectors, multi 16: LBA48
Mar 19 14:17:18 debian kernel: [    1.361212] ata1.00: configured for UDMA/100
Mar 19 14:17:18 debian kernel: [    1.361410] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600AAJB-0 00.0 PQ: 0 ANSI: 5
Mar 19 14:17:18 debian kernel: [    1.370121] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Mar 19 14:17:18 debian kernel: [    1.370437] sd 0:0:0:0: [sda] Write Protect is off
Mar 19 14:17:18 debian kernel: [    1.370515] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 19 14:17:18 debian kernel: [    1.395516]  sda: sda1 sda2 < sda5 >
Mar 19 14:17:18 debian kernel: [    1.396253] sd 0:0:0:0: [sda] Attached SCSI disk
Mar 19 14:17:18 debian kernel: [    1.399367] sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar 19 14:17:18 debian kernel: [    1.436039] usb 1-2: new high-speed USB device number 2 using ehci_hcd
Mar 19 14:17:18 debian kernel: [    1.569827] usb 1-2: New USB device found, idVendor=1307, idProduct=0163
Mar 19 14:17:18 debian kernel: [    1.569833] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 19 14:17:18 debian kernel: [    1.569837] usb 1-2: Product: mini-USB2BU
Mar 19 14:17:18 debian kernel: [    1.569840] usb 1-2: Manufacturer: USB007
Mar 19 14:17:18 debian kernel: [    1.569843] usb 1-2: SerialNumber: 00000000001BA4
Mar 19 14:17:18 debian kernel: [    1.574506] Initializing USB Mass Storage driver...
Mar 19 14:17:18 debian kernel: [    1.574900] scsi2 : usb-storage 1-2:1.0
Mar 19 14:17:18 debian kernel: [    1.575065] usbcore: registered new interface driver usb-storage
Mar 19 14:17:18 debian kernel: [    1.575071] USB Mass Storage support registered.
Mar 19 14:17:18 debian kernel: [    1.596034] Refined TSC clocksource calibration: 2992.499 MHz.
Mar 19 14:17:18 debian kernel: [    1.596043] Switching to clocksource tsc
Mar 19 14:17:18 debian kernel: [    1.696170] firewire_core: created device fw0: GUID 0800460301ac187c, S400
Mar 19 14:17:18 debian kernel: [    1.806532] PM: Starting manual resume from disk
Mar 19 14:17:18 debian kernel: [    1.851526] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Mar 19 14:17:18 debian kernel: [    1.920037] usb 3-1: new low-speed USB device number 2 using uhci_hcd
Mar 19 14:17:18 debian kernel: [    2.095400] usb 3-1: New USB device found, idVendor=046d, idProduct=c069
Mar 19 14:17:18 debian kernel: [    2.095409] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 19 14:17:18 debian kernel: [    2.095415] usb 3-1: Product: USB Laser Mouse
Mar 19 14:17:18 debian kernel: [    2.095420] usb 3-1: Manufacturer: Logitech
Mar 19 14:17:18 debian kernel: [    2.344034] usb 3-2: new low-speed USB device number 3 using uhci_hcd
Mar 19 14:17:18 debian kernel: [    2.498323] usb 3-2: New USB device found, idVendor=0430, idProduct=0005
Mar 19 14:17:18 debian kernel: [    2.498329] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 19 14:17:18 debian kernel: [    2.573063] scsi 2:0:0:0: Direct-Access     USB007   mini-USB2BU      0.00 PQ: 0 ANSI: 2
Mar 19 14:17:18 debian kernel: [    2.573970] sd 2:0:0:0: Attached scsi generic sg1 type 0
Mar 19 14:17:18 debian kernel: [    2.574425] sd 2:0:0:0: [sdb] 62496 512-byte logical blocks: (31.9 MB/30.5 MiB)
Mar 19 14:17:18 debian kernel: [    2.575044] sd 2:0:0:0: [sdb] Write Protect is off
Mar 19 14:17:18 debian kernel: [    2.608085]  sdb: sdb1
Mar 19 14:17:18 debian kernel: [    2.610636] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Mar 19 14:17:18 debian kernel: [    4.140233] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Mar 19 14:17:18 debian kernel: [    4.140253] ACPI: Power Button [PWRB]
Mar 19 14:17:18 debian kernel: [    4.140417] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Mar 19 14:17:18 debian kernel: [    4.140426] ACPI: Power Button [PWRF]
Mar 19 14:17:18 debian kernel: [    4.274736] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar 19 14:17:18 debian kernel: [    4.677506] intel_rng: FWH not detected
Mar 19 14:17:18 debian kernel: [    4.681758] input: PC Speaker as /devices/platform/pcspkr/input/input2
Mar 19 14:17:18 debian kernel: [    4.692970] cfg80211: Calling CRDA to update world regulatory domain
Mar 19 14:17:18 debian kernel: [    4.710565] iTCO_vendor_support: vendor-support=0
Mar 19 14:17:18 debian kernel: [    4.910758] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
Mar 19 14:17:18 debian kernel: [    4.910915] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Mar 19 14:17:18 debian kernel: [    4.973913] parport_pc 00:07: reported by Plug and Play ACPI
Mar 19 14:17:18 debian kernel: [    4.973970] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Mar 19 14:17:18 debian kernel: [    5.046385] ath5k 0000:02:0b.0: registered as 'phy0'
Mar 19 14:17:18 debian kernel: [    5.450641] ath5k phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
Mar 19 14:17:18 debian kernel: [    5.450645] ath5k phy0: RF5111 5GHz radio found (0x17)
Mar 19 14:17:18 debian kernel: [    5.450648] ath5k phy0: RF2111 2GHz radio found (0x23)
Mar 19 14:17:18 debian kernel: [    5.504034] intel8x0_measure_ac97_clock: measured 54356 usecs (2619 samples)
Mar 19 14:17:18 debian kernel: [    5.504040] intel8x0: clocking to 48000
Mar 19 14:17:18 debian kernel: [    5.536533] nvidia: module license 'NVIDIA' taints kernel.
Mar 19 14:17:18 debian kernel: [    5.536539] Disabling lock debugging due to kernel taint
Mar 19 14:17:18 debian kernel: [    6.154560] cfg80211: World regulatory domain updated:
Mar 19 14:17:18 debian kernel: [    6.154567] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 14:17:18 debian kernel: [    6.154574] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 19 14:17:18 debian kernel: [    6.154580] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mar 19 14:17:18 debian kernel: [    6.154586] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mar 19 14:17:18 debian kernel: [    6.154592] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 19 14:17:18 debian kernel: [    6.154598] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 19 14:17:18 debian kernel: [    6.154617] cfg80211: Calling CRDA for country: CO
Mar 19 14:17:18 debian kernel: [    6.180468] cfg80211: Regulatory domain changed to country: CO
Mar 19 14:17:18 debian kernel: [    6.180475] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 14:17:18 debian kernel: [    6.180481] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Mar 19 14:17:18 debian kernel: [    6.180487] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Mar 19 14:17:18 debian kernel: [    6.180493] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
Mar 19 14:17:18 debian kernel: [    6.180499] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Mar 19 14:17:18 debian kernel: [    6.253054] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Mar 19 14:17:18 debian kernel: [    6.253318] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.36  Tue Sep 11 12:14:54 PDT 2012
Mar 19 14:17:18 debian kernel: [    6.530116] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
Mar 19 14:17:18 debian kernel: [    6.530478] generic-usb 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.1-1/input0
Mar 19 14:17:18 debian kernel: [    6.544135] input: HID 0430:0005 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
Mar 19 14:17:18 debian kernel: [    6.544387] generic-usb 0003:0430:0005.0002: input,hidraw1: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:1d.1-2/input0
Mar 19 14:17:18 debian kernel: [    6.544429] usbcore: registered new interface driver usbhid
Mar 19 14:17:18 debian kernel: [    6.544434] usbhid: USB HID core driver
Mar 19 14:17:18 debian kernel: [    8.416110] Adding 3143676k swap on /dev/sda5.  Priority:-1 extents:1 across:3143676k
Mar 19 14:17:18 debian kernel: [    8.441410] EXT4-fs (sda1): re-mounted. Opts: (null)
Mar 19 14:17:18 debian kernel: [    8.690386] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Mar 19 14:17:18 debian kernel: [    8.861074] loop: module loaded
Mar 19 14:17:18 debian kernel: [   10.621459] RPC: Registered named UNIX socket transport module.
Mar 19 14:17:18 debian kernel: [   10.621467] RPC: Registered udp transport module.
Mar 19 14:17:18 debian kernel: [   10.621471] RPC: Registered tcp transport module.
Mar 19 14:17:18 debian kernel: [   10.621475] RPC: Registered tcp NFSv4.1 backchannel transport module.
Mar 19 14:17:18 debian kernel: [   10.675739] FS-Cache: Loaded
Mar 19 14:17:18 debian kernel: [   10.719267] FS-Cache: Netfs 'nfs' registered for caching
Mar 19 14:17:18 debian kernel: [   10.774232] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar 19 14:17:19 debian kernel: [   13.038419] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
Mar 19 14:17:21 debian kernel: [   15.161075] ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 19 14:17:21 debian kernel: [   15.164160] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
Mar 19 14:17:21 debian kernel: [   15.164427] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mar 19 14:17:21 debian kernel: [   15.175317] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar 19 14:17:25 debian kernel: [   18.777484] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
Mar 19 14:17:25 debian kernel: [   18.777506] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
Mar 19 14:17:25 debian kernel: [   18.777551] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
Mar 19 14:17:34 debian rsyslogd-2177: imuxsock begins to drop messages from pid 3152 due to rate-limiting
Mar 19 14:17:35 debian rsyslogd-2177: imuxsock lost 27 messages from pid 3152 due to rate-limiting
Mar 19 14:19:00 debian kernel: [  113.727083] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

[свернуть]

Сообщение объединено: 20 марта 2013, 02:07:04
OpenSUSE /Live CD/ на котором работает : Хorg 1.12.3 Pixman 0.24.4 Xorg video driver 12.0
на последним OpenSUSE /Live CD/ не работает : Xorg 1.13.2 Pixman 0.28.2 Xorg video driver 13.1

[ogost]

я даже не знаю куда смотреть. может, проблема не в дровах, а в гноме?
может, установить другое ДЕ и попробовать проверить там работу видеокарты?
Быть может, вы не обновлялись?

[Fang]

>установить другое ДЕ и попробовать проверить там работу видеокарты?
А что значит ДЕ?
Сообщение объединено: 20 марта 2013, 05:00:43
/etc/apt/sources.list

Открыть содержимое (спойлер)

# deb cdrom:[Debian GNU/Linux 7.0.0 _Wheezy_ - Official Snapshot i386 LIVE/INSTALL Binary 20130302-13:26]/ wheezy main
deb cdrom:[Debian GNU/Linux 7.0.0 _Wheezy_ - Official Snapshot i386 LIVE/INSTALL Binary 20130302-13:26]/ wheezy main
deb http://ftp.us.debian.org/debian/ wheezy main contrib non-free
deb-src http://ftp.us.debian.org/debian/ wheezy main contrib non-free
deb http://security.debian.org/ wheezy/updates main contrib non-free
deb-src http://security.debian.org/ wheezy/updates main contrib non-free
deb http://ftp.us.debian.org/debian/ wheezy-updates contrib non-free main

[свернуть]

Карту использовал с Ubuntu 10.10 , Debian 7 установил 3 дня назад.
Сообщение объединено: 20 марта 2013, 05:47:26
ДЕ - desktop environment?
карта работала в mate-desktop, gnome 2 , windows и XFCE
Сообщение объединено: 20 марта 2013, 06:12:09
призапуске gnome-shell жрет 80% -100% CPU  но после 0% с 8% RAM

[ogost]

ДЕ - desktop environment?

ага, desktop environment

карта работала в mate-desktop, gnome 2 , windows и XFCE

а на дебиане с другим ДЕ, допустим, mate, работала?
я начинаю сомневаться, что проблема в дровах. гном3 вообще очень ресурсоемкий, но раз у вас работала нормально под сусей, то там проблема либо в версиях иксов, либо в дебиане. беглое гугление показывает, что подобная проблема была/есть и на арче, и на генту, и на дебиане, но там везде решение не универсальное.

[Fang]

да, возможно от версии  Xorg зависит.
Спасибо за помощь.

[Fang]

Купил новую карту Nvidia 6200 - сейчас Gnome 3  работает а FX 5600 поставил на компьютер с FreeBSD 9.0 ....