[Решено] Не могу попасть в консоль

Сергей · 03 августа 2013, 19:50:53

Установил debian 7 cd1 только системные утилиты.
При загрузки после груба несколько строк и цветные разводы.

Перед этим ставил debian 7 lxde. Тоже самое но после цветных разводов запускались иксы.
Несколько помучив grub и initramfs вместо разводов появился текст, но uvesafb в логах сообщал
о какой то ошибке. Впрочем на работу системы это ни как не влияло.

В Ubuntu такой проблемы не наблюдалось.

Не могу попасть в консоль. На этом диске стоит ещё Lubuntu 12.04. Из неё редактировал /etc/default/grub
Через chroot обновлял. Что то ещё делал, но без успешно.

Хотел собрать лёгкую систему без лишнего мусора.
В какую сторону копать?

qupl · 03 августа 2013, 19:58:33

Какая видеокарта? На вторую консоль переключаться не пробовали? Логи смотрели?

Сергей · 04 августа 2013, 10:43:48

s@Lubuntu:~$ lspci | grep VGA
00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video

Нетбук Cameron nb 1060.
У монитора обрезанное разрешение экрана 1024x600. Лишь в некоторых дистрибутивах подхватывалось из коробки. А так приходилось xorg.conf писать.

Что значит вторая консоль? И как на неё переключаться?

dmesg смотрел. Не чего, за что можно было бы зацепиться, не увидел.

dmesg

Открыть содержимое (спойлер)

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.46-1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001e7b0000 (usable)
[ 0.000000] BIOS-e820: 000000001e7b0000 - 000000001e7bffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001e7bffc0 - 000000001e7c0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000080400000 - 0000000080440004 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: WIPRO Limited /TR2350, BIOS 4.00.01 Rev. 1.00.003 Built: 08/18/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1e7b0 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-000000001e7b0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001e400000 page 2M
[ 0.000000] 001e400000 - 001e7b0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1e7b0000 @ 17f8000-1800000
[ 0.000000] RAMDISK: 1d23f000 - 1db8c000
[ 0.000000] ACPI: RSDP 000e9010 00014 (v00 OID_00)
[ 0.000000] ACPI: RSDT 1e7b2220 00030 (v01 AMD RSDT_000 31303030 AMD 31303030)
[ 0.000000] ACPI: FACP 1e7b2120 00084 (v01 AMD FACP_000 31303030 AMD 31303030)
[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 (20110623/tbfadt-610)
[ 0.000000] ACPI: DSDT 1e7b0000 02112 (v01 INSYDE CS553x 00001007 INTL 20030122)
[ 0.000000] ACPI: FACS 1e7bffc0 00040
[ 0.000000] ACPI: BOOT 1e7b21b0 00028 (v01 AMD BOOT_000 31303030 AMD 31303030)
[ 0.000000] ACPI: DBGP 1e7b21e0 00034 (v01 AMD DBGP_000 31303030 AMD 31303030)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 487MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1e7b0000
[ 0.000000] low ram: 0 - 1e7b0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001e7b0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001e7b0
[ 0.000000] On node 0 totalpages: 124735
[ 0.000000] free_area_init_node: node 0, pgdat c13c5a38, node_mem_map de3df200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 944 pages used for memmap
[ 0.000000] Normal zone: 119808 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x9c10
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80440004 (gap: 80440004:6fbbfffc)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:

0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 123759
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486 root=UUID=460cb882-044b-4cc2-8df8-f9a7639fddbf ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 480184k/499392k available (2596k kernel code, 18756k reserved, 1293k data, 452k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdefb0000 - 0xff7fe000 ( 520 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde7b0000 ( 487 MB)
[ 0.000000] .init : 0xc13cd000 - 0xc143e000 ( 452 kB)
[ 0.000000] .data : 0xc128902c - 0xc13cc680 (1293 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128902c (2596 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=ddc06000 soft=ddc08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.137 MHz processor.
[ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.27 BogoMIPS (lpj=1992548)
[ 0.008039] pid_max: default: 32768 minimum: 301
[ 0.008259] Security Framework initialized
[ 0.008287] AppArmor: AppArmor disabled by boot time parameter
[ 0.008364] Mount-cache hash table entries: 512
[ 0.008778] Initializing cgroup subsys cpuacct
[ 0.008800] Initializing cgroup subsys memory
[ 0.008839] Initializing cgroup subsys devices
[ 0.008856] Initializing cgroup subsys freezer
[ 0.008871] Initializing cgroup subsys net_cls
[ 0.008887] Initializing cgroup subsys blkio
[ 0.008921] Initializing cgroup subsys perf_event
[ 0.009052] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
[ 0.012411] ACPI: Core revision 20110623
[ 0.019835] ACPI: setting ELCR to 0200 (from 0ca0)
[ 0.024294] Performance Events: no PMU driver, software events only.
[ 0.024683] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.025242] devtmpfs: initialized
[ 0.025860] PM: Registering ACPI NVS region at 1e7bffc0 (64 bytes)
[ 0.028229] print_constraints: dummy:
[ 0.028484] NET: Registered protocol family 16
[ 0.029070] EISA bus registered
[ 0.029261] ACPI: bus type pci registered
[ 0.031444] PCI: PCI BIOS revision 2.10 entry at 0xff8b7, last bus=1
[ 0.031461] PCI: Using configuration type 1 for base access
[ 0.036152] bio: create slab <bio-0> at 0
[ 0.036512] ACPI: Added _OSI(Module Device)
[ 0.036529] ACPI: Added _OSI(Processor Device)
[ 0.036546] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.036564] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.043162] ACPI: EC: Look up EC in DSDT
[ 0.054604] ACPI: Interpreter enabled
[ 0.054646] ACPI: (supports S0 S1 S3 S5)
[ 0.054760] ACPI: BIOS offers _GTS
[ 0.054773] ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
[ 0.054795] ACPI: BIOS offers _BFS
[ 0.054808] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
[ 0.054827] ACPI: Using PIC for interrupt routing
[ 0.308246] ACPI: No dock devices found.
[ 0.308263] HEST: Table not found.
[ 0.308291] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.308729] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.309710] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.309735] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xac17] (ignored)
[ 0.309759] pci_root PNP0A03:00: host bridge window [io 0xac20-0xffff] (ignored)
[ 0.309784] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.309809] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[ 0.309834] pci_root PNP0A03:00: host bridge window [mem 0x1e7c0000-0x403fffff] (ignored)
[ 0.309859] pci_root PNP0A03:00: host bridge window [mem 0x40500000-0xefffffff] (ignored)
[ 0.310012] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600
[ 0.310160] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f]
[ 0.310274] pci 0000:00:01.0: reg 14: [io 0x9e00-0x9e07]
[ 0.311088] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300
[ 0.311388] pci 0000:00:01.1: reg 10: [mem 0x90000000-0x91ffffff]
[ 0.311604] pci 0000:00:01.1: reg 14: [mem 0x8fffc000-0x8fffffff]
[ 0.311821] pci 0000:00:01.1: reg 18: [mem 0x8fff8000-0x8fffbfff]
[ 0.312041] pci 0000:00:01.1: reg 1c: [mem 0x8fff4000-0x8fff7fff]
[ 0.312259] pci 0000:00:01.1: reg 20: [mem 0x8fff0000-0x8fff3fff]
[ 0.312994] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010
[ 0.313251] pci 0000:00:01.2: reg 10: [mem 0xefe00000-0xefe03fff]
[ 0.314602] pci 0000:00:0d.0: [10ec:8139] type 0 class 0x000200
[ 0.314641] pci 0000:00:0d.0: reg 10: [io 0xdf00-0xdfff]
[ 0.314671] pci 0000:00:0d.0: reg 14: [mem 0xefd00000-0xefd000ff]
[ 0.314765] pci 0000:00:0d.0: supports D1 D2
[ 0.314784] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
[ 0.314842] pci 0000:00:0e.0: [104c:ac56] type 2 class 0x000607
[ 0.314883] pci 0000:00:0e.0: reg 10: [mem 0xefc00000-0xefc00fff]
[ 0.314935] pci 0000:00:0e.0: supports D1 D2
[ 0.314954] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.315103] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601
[ 0.315420] pci 0000:00:0f.0: reg 10: [io 0x6000-0x6007]
[ 0.315687] pci 0000:00:0f.0: reg 14: [io 0x6100-0x61ff]
[ 0.315953] pci 0000:00:0f.0: reg 18: [io 0x6200-0x623f]
[ 0.316257] pci 0000:00:0f.0: reg 1c: [io 0x0000-0x001f]
[ 0.316529] pci 0000:00:0f.0: reg 20: [io 0x9d00-0x9d7f]
[ 0.316811] pci 0000:00:0f.0: reg 24: [io 0x9c00-0x9c3f]
[ 0.317407] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101
[ 0.318375] pci 0000:00:0f.2: reg 20: [io 0xeff0-0xefff]
[ 0.319077] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401
[ 0.319350] pci 0000:00:0f.3: reg 10: [io 0xdc80-0xdcff]
[ 0.320797] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03
[ 0.321204] pci 0000:00:0f.4: reg 10: [mem 0xeff00000-0xeff00fff]
[ 0.322817] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.323167] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03
[ 0.323526] pci 0000:00:0f.5: reg 10: [mem 0xef900000-0xef900fff]
[ 0.325131] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.325426] pci_bus 0000:00: on NUMA node 0
[ 0.325448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.326155] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.335701] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.337589] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.339454] ACPI: PCI Interrupt Link [LNKC] (IRQs *7)
[ 0.341367] ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
[ 0.342846] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[ 0.342887] vgaarb: loaded
[ 0.342899] vgaarb: bridge control possible 0000:00:01.1
[ 0.343215] PCI: Using ACPI for IRQ routing
[ 0.343234] PCI: pci_cache_line_size set to 32 bytes
[ 0.343736] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.343757] reserve RAM buffer: 000000001e7b0000 - 000000001fffffff
[ 0.344479] Switching to clocksource pit
[ 0.351762] pnp: PnP ACPI init
[ 0.351862] ACPI: bus type pnp registered
[ 0.471453] pnp 00:00: [bus 00-ff]
[ 0.471474] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.471494] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.471514] pnp 00:00: [io 0x0d00-0xac17 window]
[ 0.471578] pnp 00:00: [io 0xac20-0xffff window]
[ 0.471600] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.471622] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 0.471643] pnp 00:00: [mem 0x1e7c0000-0x403fffff window]
[ 0.471665] pnp 00:00: [mem 0x40500000-0xefffffff window]
[ 0.471890] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.472043] pnp 00:01: [irq 8]
[ 0.472062] pnp 00:01: [io 0x0070-0x0073]
[ 0.472242] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.472371] pnp 00:02: [io 0x0061]
[ 0.472563] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.472846] pnp 00:03: [mem 0x00000000-0x0009ffff]
[ 0.472877] pnp 00:03: [mem 0x000e0000-0x000fffff]
[ 0.472897] pnp 00:03: [mem 0x00100000-0x1e7affff]
[ 0.472917] pnp 00:03: [mem 0x40400000-0x4041ffff]
[ 0.472937] pnp 00:03: [mem 0xf0000000-0xffffffff]
[ 0.472956] pnp 00:03: [io 0x0092]
[ 0.473237] system 00:03: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.473265] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.473292] system 00:03: [mem 0x00100000-0x1e7affff] could not be reserved
[ 0.473318] system 00:03: [mem 0x40400000-0x4041ffff] has been reserved
[ 0.473344] system 00:03: [mem 0xf0000000-0xffffffff] has been reserved
[ 0.473371] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.473508] pnp 00:04: [dma 4]
[ 0.473527] pnp 00:04: [io 0x0000-0x000f]
[ 0.473545] pnp 00:04: [io 0x0080-0x008f]
[ 0.473564] pnp 00:04: [io 0x00c0-0x00df]
[ 0.473583] pnp 00:04: [io 0x0480-0x048f]
[ 0.473778] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.473879] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.473899] pnp 00:05: [irq 13]
[ 0.474092] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.475418] pnp 00:06: [io 0x002e-0x002f]
[ 0.475732] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.476294] pnp 00:07: [irq 1]
[ 0.476312] pnp 00:07: [io 0x0060]
[ 0.476330] pnp 00:07: [io 0x0064]
[ 0.476541] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.477088] pnp 00:08: [irq 12]
[ 0.477284] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.477758] pnp: PnP ACPI: found 9 devices
[ 0.477773] ACPI: ACPI bus type pnp unregistered
[ 0.477793] PnPBIOS: Disabled by ACPI PNP
[ 0.525361] Switching to clocksource acpi_pm
[ 0.525430] PCI: max bus depth: 1 pci_try_num: 2
[ 0.525498] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f]
[ 0.525599] pci 0000:00:0e.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[ 0.525630] pci 0000:00:0e.0: BAR 15: assigned [mem 0x88000000-0x8bffffff pref]
[ 0.525661] pci 0000:00:0e.0: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.525690] pci 0000:00:0e.0: BAR 13: assigned [io 0x1800-0x18ff]
[ 0.525714] pci 0000:00:0e.0: CardBus bridge to [bus 01-04]
[ 0.525734] pci 0000:00:0e.0: bridge window [io 0x1800-0x18ff]
[ 0.525758] pci 0000:00:0e.0: bridge window [io 0x1400-0x14ff]
[ 0.525783] pci 0000:00:0e.0: bridge window [mem 0x88000000-0x8bffffff pref]
[ 0.525808] pci 0000:00:0e.0: bridge window [mem 0x84000000-0x87ffffff]
[ 0.528714] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
[ 0.528732] PCI: setting IRQ 7 as level-triggered
[ 0.528761] pci 0000:00:0e.0: setting latency timer to 64
[ 0.528786] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.528808] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.528831] pci_bus 0000:01: resource 0 [io 0x1800-0x18ff]
[ 0.528853] pci_bus 0000:01: resource 1 [io 0x1400-0x14ff]
[ 0.528875] pci_bus 0000:01: resource 2 [mem 0x88000000-0x8bffffff pref]
[ 0.528899] pci_bus 0000:01: resource 3 [mem 0x84000000-0x87ffffff]
[ 0.529132] NET: Registered protocol family 2
[ 0.529441] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.530639] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.531061] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.531312] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.531329] TCP reno registered
[ 0.531347] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.531381] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.531667] NET: Registered protocol family 1
[ 0.531793] pci 0000:00:01.1: Boot video device
[ 0.534797] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.534815] PCI: setting IRQ 10 as level-triggered
[ 0.604407] PCI: CLS 32 bytes, default 32
[ 0.604679] Unpacking initramfs...
[ 2.454636] Freeing initrd memory: 9524k freed
[ 2.464114] Simple Boot Flag at 0x3f set to 0x1
[ 2.466508] audit: initializing netlink socket (disabled)
[ 2.466561] type=2000 audit(1375540359.461:1): initialized
[ 2.577694] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.578249] VFS: Disk quotas dquot_6.5.2
[ 2.578382] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.578642] msgmni has been set to 956
[ 2.579447] alg: No test for stdrng (krng)
[ 2.579570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.579591] io scheduler noop registered
[ 2.579606] io scheduler deadline registered
[ 2.579661] io scheduler cfq registered (default)
[ 2.580285] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.580443] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.580461] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.581583] ERST: Table is not found!
[ 2.581597] GHES: HEST is not enabled!
[ 2.581680] isapnp: Scanning for PnP cards...
[ 2.937405] isapnp: No Plug & Play device found
[ 2.937713] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.940153] Linux agpgart interface v0.103
[ 2.941476] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.974706] i8042: Detected active multiplexing controller, rev 1.1
[ 2.991541] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.991576] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.991795] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.991992] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.992237] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.993025] mousedev: PS/2 mouse device common for all mice
[ 2.994691] rtc_cmos 00:01: RTC can wake from S4
[ 2.995081] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.995135] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 2.995417] EISA: Probing bus 0 at eisa.0
[ 2.995447] Cannot allocate resource for EISA slot 1
[ 2.995511] Cannot allocate resource for EISA slot 6
[ 2.995551] EISA: Detected 0 cards.
[ 2.995566] cpuidle: using governor ladder
[ 2.995581] cpuidle: using governor menu
[ 2.997314] TCP cubic registered
[ 2.997461] NET: Registered protocol family 10
[ 3.001159] Mobile IPv6
[ 3.001176] NET: Registered protocol family 17
[ 3.001202] Registering the dns_resolver key type
[ 3.001255] Using IPI Shortcut mode
[ 3.001843] PM: Hibernation image not present or could not be loaded.
[ 3.001895] registered taskstats version 1
[ 3.003010] rtc_cmos 00:01: setting system clock to 2013-08-03 14:32:40 UTC (1375540360)
[ 3.003310] Initializing network drop monitor service
[ 3.003880] Freeing unused kernel memory: 452k freed
[ 3.004760] Write protecting the kernel text: 2600k
[ 3.004922] Write protecting the kernel read-only data: 1028k
[ 3.038565] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.084613] udevd[42]: starting version 175
[ 3.292950] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.293032] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.295654] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 3.357832] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 3.357854] PCI: setting IRQ 5 as level-triggered
[ 3.453638] 8139too 0000:00:0d.0: eth0: RealTek RTL8139 at 0xdf00, 00:1a:13:b2:04:b3, IRQ 5
[ 3.576338] Refined TSC clocksource calibration: 498.050 MHz.
[ 3.576368] Switching to clocksource tsc
[ 3.613971] SCSI subsystem initialized
[ 3.627045] usbcore: registered new interface driver usbfs
[ 3.627179] usbcore: registered new interface driver hub
[ 3.640463] usbcore: registered new device driver usb
[ 3.643319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.643599] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 3.643643] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 3.643734] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.680749] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xef900000
[ 3.699411] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.699540] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.699564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.699585] usb usb1: Product: EHCI Host Controller
[ 3.699603] usb usb1: Manufacturer: Linux 3.2.0-4-486 ehci_hcd
[ 3.699622] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.703177] libata version 3.00 loaded.
[ 3.708746] hub 1-0:1.0: USB hub found
[ 3.708781] hub 1-0:1.0: 4 ports detected
[ 3.710437] pata_amd 0000:00:0f.2: version 0.4.1
[ 3.722286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.722373] scsi0 : pata_amd
[ 3.728691] scsi1 : pata_amd
[ 3.729713] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq 14
[ 3.729738] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq 15
[ 3.730239] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 3.730284] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 3.730347] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 3.730421] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xeff00000
[ 3.801582] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.801609] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.801630] usb usb2: Product: OHCI Host Controller
[ 3.801648] usb usb2: Manufacturer: Linux 3.2.0-4-486 ohci_hcd
[ 3.801667] usb usb2: SerialNumber: 0000:00:0f.4
[ 3.802456] hub 2-0:1.0: USB hub found
[ 3.802490] hub 2-0:1.0: 4 ports detected
[ 3.900667] ata1.00: ATA-7: FUJITSU MHW2060AT, 0000000B, max UDMA/100
[ 3.900695] ata1.00: 117210240 sectors, multi 16: LBA
[ 3.916462] ata1.00: configured for UDMA/100
[ 3.916937] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2060A 0000 PQ: 0 ANSI: 5
[ 3.918646] ata2: port disabled--ignoring
[ 3.962322] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 3.962626] sd 0:0:0:0: [sda] Write Protect is off
[ 3.962650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.962784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.064258] sda: sda1 sda2 sda3 sda4
[ 4.067124] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.078316] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.957082] PM: Starting manual resume from disk
[ 4.957106] PM: Hibernation image partition 8:4 present
[ 4.957121] PM: Looking for hibernation image.
[ 4.978419] PM: Image not found (code -22)
[ 4.978434] PM: Hibernation image not present or could not be loaded.
[ 5.132406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.832254] udevd[278]: starting version 175
[ 8.563275] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 8.679739] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 8.781483] ACPI: resource (null) [io 0x6100-0x61ff] conflicts with ACPI region GPIO [io 0x6100-0x61ff]
[ 8.781508] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.781634] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
[ 8.781748] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
[ 8.815160] AMD Geode RNG detected
[ 9.158615] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 9.158637] PCI: setting IRQ 11 as level-triggered
[ 9.176952] ACPI: Lid Switch [LID]
[ 9.188240] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 9.188936] ACPI: Power Button [PWRF]
[ 9.209791] lxfb 0000:00:01.1: 24576 KB of video memory at 0x90000000
[ 9.280658] fbcon: Geode LX (fb0) is primary device
[ 9.293375] Console: switching to colour frame buffer device 80x30
[ 9.302663] fb0: Geode LX frame buffer device
[ 9.485788] psmouse serio3: hgpk: ID: 10 00 64
[ 10.377823] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input4
[ 10.975719] ACPI: Battery Slot [BATT] (battery present)
[ 11.067201] yenta_cardbus 0000:00:0e.0: CardBus bridge found [104c:ac56]
[ 11.067242] yenta_cardbus 0000:00:0e.0: Enabling burst memory read transactions
[ 11.067267] yenta_cardbus 0000:00:0e.0: Using CSCINT to route CSC interrupts to PCI
[ 11.067288] yenta_cardbus 0000:00:0e.0: Routing CardBus interrupts to PCI
[ 11.067313] yenta_cardbus 0000:00:0e.0: TI: mfunc 0x00001002, devctl 0x60
[ 11.255637] ACPI: AC Adapter [AC] (on-line)
[ 11.269394] Error: Driver 'pcspkr' is already registered, aborting...
[ 11.296651] yenta_cardbus 0000:00:0e.0: ISA IRQ mask 0x0000, PCI irq 7
[ 11.296676] yenta_cardbus 0000:00:0e.0: Socket status: 30000007
[ 11.476658] geode-aes: GEODE AES engine enabled.
[ 11.477651] snd_cs5535audio 0000:00:0f.3: setting latency timer to 64
[ 11.772188] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 11.775094] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x480-0x48f 0x4d0-0x4d7
[ 11.780395] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 11.781440] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.782594] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[ 11.782764] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 11.782941] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 11.783107] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 14.401060] Adding 742396k swap on /dev/sda4. Priority:-1 extents:1 across:742396k
[ 14.476430] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 15.118716] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 15.367627] loop: module loaded
[ 20.485010] RPC: Registered named UNIX socket transport module.
[ 20.485033] RPC: Registered udp transport module.
[ 20.485048] RPC: Registered tcp transport module.
[ 20.485063] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.585581] FS-Cache: Loaded
[ 20.742812] FS-Cache: Netfs 'nfs' registered for caching
[ 20.819622] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

[свернуть]

qupl · 04 августа 2013, 11:32:45

Цитата: Сергей от 04 августа 2013, 10:43:48Что значит вторая консоль? И как на неё переключаться?

Ctrl+Alt+F2

Я правильно понял, что Х-ов нет и загрузка прерывается не дойдя до логина пользователя?

Сергей · 04 августа 2013, 13:05:26

Да, загрузка прерывается до логина. Всего 6 или 7 строк.

vladimir_ar · 04 августа 2013, 13:08:10

в конфиге груба в строке запуска ядра добавить radeon.modeset=0

Сергей · 04 августа 2013, 13:55:18

Сейчас компьютер занят. Освободится попробую.
Может систему переставить, тем самым исключив мои предыдущие действия?

Сергей · 06 августа 2013, 19:40:15

vladimir_ar
Спасибо! radeon.modeset=0 помогло.

Если не трудно, раскажи что это за параметр?
И как он относится к моей видеокарте?

vladimir_ar · 06 августа 2013, 20:39:30

Цитата: Сергей от 06 августа 2013, 19:40:15И как он относится к моей видеокарте?

Наверное, как и к АТИ - АМД.

Цитата: Сергей от 06 августа 2013, 19:40:15Если не трудно, раскажи что это за параметр?

Особо как-то не вникал. Судя по названию - отключения разных нестандартных режимов работы, которые корректно могут понять, скорее всего, родные драйвера.

Сообщение объединено: 06 августа 2013, 20:42:19

Я бы на Вашем месте поискал бы родные лрайвера
AMD Geode™ LX Processor Linux

Сергей · 07 августа 2013, 20:31:09

ЦитироватьЯ бы на Вашем месте поискал бы родные лрайвера
AMD Geode™ LX Processor Linux

На этом ресурсе нашёл только, (на мой взгляд) наиболее подходящею версию за 2004 год. Graphics_LinuxXFree86_GX2_2.7.12_src.tar.gz.
И для ядра 2.4.
Скачивал, читал редми. Может быть не то нашёл или не так искал.

На этом ресурсе вроде бы посвежее. http://cgit.freedesktop.org/xorg/driver/xf86-video-geode
Но она же есть и в стандартных репах. Только в репах 2.11.13 а там 2.11.14.

На чём мне остановиться?
И как найти драйвер именно для моей видиокарты?