Motherboard Gigabyte GA-8I915P Duo v2 - чем регулировать cooler процессора?

KBH · 08 января 2015, 21:28:48

Открыть содержимое (спойлер)

# sensors-detect revision 6031 (2012-03-07 17:14:01 +0100)
# Board: Gigabyte Technology Co., Ltd. 8I915P Duo

Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No

Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found `ITE IT8712F Super IO Sensors' Success!
(address 0x290, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No

Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No

[свернуть]

qupl · 08 января 2015, 21:31:25

KBH, это точно вывод sensors? Больше похоже на sensors-detect.

KBH · 08 января 2015, 21:34:20

Это sensors-detect, вывод sensors приведён на 1 странице, под спойлером.
В 10 посте.

yura_n · 08 января 2015, 21:36:01

Код Выделить


modprobe lm_sensors

от рута попробуйте. А потом снова выполните sensors-detect.
P.S. И не редактируйте вы предыдущие посты, если только грамматические ошибки не хотите исправить. Написал одно, а вы уже успели исправить на другое.

KBH · 08 января 2015, 21:48:16

Извиняюсь за исправления.

sensors-detect

Открыть содержимое (спойлер)

root@debian:/home/vovan# sensors-detect
# sensors-detect revision 6031 (2012-03-07 17:14:01 +0100)
# Board: Gigabyte Technology Co., Ltd. 8I915P Duo

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found `ITE IT8712F Super IO Sensors' Success!
(address 0x290, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): YES
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): yes
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801FB ICH6
Module i2c-dev loaded successfully.

Next adapter: SMBus I801 adapter at 0500 (i2c-0)
Do you want to scan it? (yes/NO/selectively): yes
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)

Next adapter: nouveau-0000:01:00.0-0 (i2c-1)
Do you want to scan it? (yes/NO/selectively): yes
Client found at address 0x4a
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Client found at address 0x4b
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Analog Devices ADT7481'... No

Next adapter: nouveau-0000:01:00.0-1 (i2c-2)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: nouveau-0000:01:00.0-2 (i2c-3)
Do you want to scan it? (yes/NO/selectively): yes

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `it87':
* ISA bus, address 0x290
Chip `ITE IT8712F Super IO Sensors' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)NO

Unloading i2c-dev... OK
Unloading cpuid... OK

[свернуть]

modprobe lm-sensors

Открыть содержимое (спойлер)

root@debian:/home/vovan# modprobe lm-sensors
FATAL: Module lm-sensors not found.

[свернуть]

Хотя Synaptic утверждает, что lm-sensors установлен.

qupl · 08 января 2015, 21:59:00

ЦитироватьTo load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

это сделали?

Или просто modprobe it87

KBH · 08 января 2015, 22:13:21

modprobe it87

Открыть содержимое (спойлер)

root@debian:/home/vovan# modprobe it87
root@debian:/home/vovan#

[свернуть]

Т.е. вообще никакой реакции.

qupl · 08 января 2015, 22:17:04

KBH, и никаких ошибок.

Код Выделить

lsmod | grep it
sensors-detect

KBH · 08 января 2015, 22:19:45

Цитата: qupl от 08 января 2015, 21:59:00это сделали?

Вписать в /etc/modules строки "# Chip drivers" и "it87"?

qupl · 08 января 2015, 22:21:11

KBH, да, достаточно второй, первая - это комментарий.

KBH · 08 января 2015, 22:24:27

Кажется, понял:

Открыть содержимое (спойлер)

root@debian:/home/vovan# lsmod | grep it
it87 17984 0
hwmon_vid 12398 1 it87
i2c_algo_bit 12713 1 nouveau
i2c_core 19116 6 i2c_i801,i2c_algo_bit,drm,drm_kms_helper,nouveau,videodev
root@debian:/home/vovan# sensors-detect
# sensors-detect revision 6031 (2012-03-07 17:14:01 +0100)
# Board: Gigabyte Technology Co., Ltd. 8I915P Duo

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found `ITE IT8712F Super IO Sensors' Success!
(address 0x290, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): YES
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): yes
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801FB ICH6
Module i2c-dev loaded successfully.

Next adapter: SMBus I801 adapter at 0500 (i2c-0)
Do you want to scan it? (yes/NO/selectively): yes
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)

Next adapter: nouveau-0000:01:00.0-0 (i2c-1)
Do you want to scan it? (yes/NO/selectively): yes
Client found at address 0x4a
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Client found at address 0x4b
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Analog Devices ADT7481'... No

Next adapter: nouveau-0000:01:00.0-1 (i2c-2)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: nouveau-0000:01:00.0-2 (i2c-3)
Do you want to scan it? (yes/NO/selectively): yes

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `it87':
* ISA bus, address 0x290
Chip `ITE IT8712F Super IO Sensors' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)yes
Successful!

Monitoring programs won't work until the needed modules are
loaded. You may want to run '/etc/init.d/kmod start'
to load them.

Unloading i2c-dev... OK
Unloading cpuid... OK

[свернуть]

Так?

qupl · 08 января 2015, 22:27:08

Теперь еще раз смотрите sensors.

KBH · 08 января 2015, 22:30:33

Есть. Появилось что-то осмысленное:

Открыть содержимое (спойлер)

root@debian:/home/vovan# sensors
nouveau-pci-0100
Adapter: PCI adapter
temp1: +63.0°C (high = +100.0°C, crit = +110.0°C)

it8712-isa-0290
Adapter: ISA adapter
in0: +1.20 V (min = +0.00 V, max = +4.08 V)
in1: +1.78 V (min = +0.00 V, max = +4.08 V)
in2: +3.18 V (min = +0.00 V, max = +4.08 V)
+5V: +2.93 V (min = +0.00 V, max = +4.08 V)
in4: +2.90 V (min = +0.00 V, max = +4.08 V)
in5: +2.19 V (min = +0.00 V, max = +4.08 V)
in6: +0.70 V (min = +0.00 V, max = +4.08 V)
in7: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM
Vbat: +3.18 V
fan1: 2163 RPM (min = 664 RPM, div = 8 )
fan3: 0 RPM (min = 0 RPM, div = 8 )
temp1: -55.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: -2.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp3: +56.0°C (low = +127.0°C, high = +90.0°C) sensor = thermal diode
cpu0_vid: +1.263 V
intrusion0: ALARM

[свернуть]

qupl · 08 января 2015, 22:32:19

KBH, теперь читайте man fancontrol.

KBH · 08 января 2015, 22:43:19

ОК, спасибо.
Надеюсь, теперь разберусь.

Motherboard Gigabyte GA-8I915P Duo v2 - чем регулировать cooler процессора?

yura_n