Проблемы с ALI 15**

paulcarroty · 02 августа 2011, 22:02:40

Проблема еще со времен Lenny, но только сейчас я решил исправить ее.
При загрузке системы выдаются следующие сообщения:


[    4.832288] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
[    4.832295] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
[    4.879255] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[    4.879310] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.

dmesg

Открыть содержимое (спойлер)

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 02:24:44 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=e9bc4355-bb74-4ef4-b264-a973ce10452f ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: /MCT2/M1689, BIOS 6.00 PG 08/19/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ f0000000 size 32 MB (APSIZE 0)
[ 0.000000] last_pfn = 0x2fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 base 0020000000 mask FFF0000000 write-back
[ 0.000000] 2 base 00F0000000 mask FFF8000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f3a60] f3a60
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000002fff0000
[ 0.000000] 0000000000 - 002fe00000 page 2M
[ 0.000000] 002fe00000 - 002fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 2fff0000 @ 2ffed000-2fff0000
[ 0.000000] RAMDISK: 2eec8000 - 2f801000
[ 0.000000] ACPI: RSDP 00000000000f7b20 00014 (v00 AWARD )
[ 0.000000] ACPI: RSDT 000000002fff3040 00030 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000002fff30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000002fff3180 04E9B (v01 AWARD AWRDACPI 00001003 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000002fff0000 00040
[ 0.000000] ACPI: HPET 000000002fff8140 00038 (v01 AWARD AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: APIC 000000002fff8080 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000002fff0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000002fff0000
[ 0.000000] NODE_DATA [000000002ffe8000 - 000000002ffecfff]
[ 0.000000] [ffffea0000000000-ffffea0000bfffff] PMD -> [ffff88002de00000-ffff88002e9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0002fff0
[ 0.000000] On node 0 totalpages: 196478
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 2632 pages used for memmap
[ 0.000000] DMA32 zone: 189864 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88002fc00000 s78912 r8192 d23488 u2097152
[ 0.000000] pcpu-alloc: s78912 r8192 d23488 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc:

0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 193785
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=e9bc4355-bb74-4ef4-b264-a973ce10452f ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ f0000000 size 32 MB (APSIZE 0)
[ 0.000000] Node 0: aperture @ f0000000 size 128 MB
[ 0.000000] Memory: 755620k/786368k available (3324k kernel code, 456k absent, 30292k reserved, 3371k data, 560k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] HPET config register value = 0xFFFFFFFF. Disabling HPET
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.676 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.35 BogoMIPS (lpj=6398704)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004205] Security Framework initialized
[ 0.004213] SELinux: Disabled at boot.
[ 0.004375] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005390] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.005889] Mount-cache hash table entries: 256
[ 0.006141] Initializing cgroup subsys cpuacct
[ 0.006148] Initializing cgroup subsys memory
[ 0.006172] Initializing cgroup subsys devices
[ 0.006176] Initializing cgroup subsys freezer
[ 0.006179] Initializing cgroup subsys net_cls
[ 0.006183] Initializing cgroup subsys blkio
[ 0.006257] tseg: 0000000000
[ 0.006281] mce: CPU supports 5 MCE banks
[ 0.006320] SMP alternatives: switching to UP code
[ 0.010146] Freeing SMP alternatives: 8k freed
[ 0.010155] ACPI: Core revision 20110413
[ 0.010369] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x016F (20110413/psloop-526)
[ 0.010380] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x0174 (20110413/psloop-526)
[ 0.014889] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054578] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Brought up 1 CPUs
[ 0.056003] Total of 1 processors activated (3199.35 BogoMIPS).
[ 0.056003] devtmpfs: initialized
[ 0.062128] PM: Registering ACPI NVS region at 2fff0000 (12288 bytes)
[ 0.062363] print_constraints: dummy:
[ 0.062470] NET: Registered protocol family 16
[ 0.062626] TOM: 0000000030000000 aka 768M
[ 0.062631] node 0 link 0: mmio [a0000, bffff]
[ 0.062637] bus: [00, ff] on node 0 link 0
[ 0.062641] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.062645] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.062648] bus: 00 index 2 [mem 0x30000000-0xfcffffffff]
[ 0.062662] ACPI: bus type pci registered
[ 0.062753] PCI: Using configuration type 1 for base access
[ 0.063667] bio: create slab <bio-0> at 0
[ 0.065195] ACPI: EC: Look up EC in DSDT
[ 0.069858] ACPI: Interpreter enabled
[ 0.069863] ACPI: (supports S0 S1 S4 S5)
[ 0.069896] ACPI: Using IOAPIC for interrupt routing
[ 0.076491] ACPI: No dock devices found.
[ 0.076495] HEST: Table not found.
[ 0.076500] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.076589] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.076768] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.076773] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.076777] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.076782] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.076786] pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xfebfffff] (ignored)
[ 0.076808] pci 0000:00:00.0: [10b9:1689] type 0 class 0x000600
[ 0.076819] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.076887] pci 0000:00:01.0: [10b9:5246] type 1 class 0x000604
[ 0.076926] pci 0000:00:02.0: [10b9:5249] type 1 class 0x000604
[ 0.076965] pci 0000:00:03.0: [10b9:1563] type 0 class 0x000601
[ 0.077028] pci 0000:00:03.1: [10b9:7101] type 0 class 0x000680
[ 0.077082] pci 0000:00:03.1: quirk: [io 0x4000-0x403f] claimed by ali7101 ACPI
[ 0.077110] pci 0000:00:04.0: [10b9:5455] type 0 class 0x000401
[ 0.077125] pci 0000:00:04.0: reg 10: [io 0xf800-0xf8ff]
[ 0.077135] pci 0000:00:04.0: reg 14: [mem 0xfdfff000-0xfdffffff]
[ 0.077181] pci 0000:00:04.0: supports D1 D2
[ 0.077185] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
[ 0.077191] pci 0000:00:04.0: PME# disabled
[ 0.077217] pci 0000:00:0d.0: [10b9:5263] type 0 class 0x000200
[ 0.077229] pci 0000:00:0d.0: reg 10: [io 0xf600-0xf6ff]
[ 0.077237] pci 0000:00:0d.0: reg 14: [mem 0xfdffe000-0xfdffe0ff]
[ 0.077270] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[ 0.077275] pci 0000:00:0d.0: PME# disabled
[ 0.077292] pci 0000:00:0e.0: [10b9:5229] type 0 class 0x000101
[ 0.077320] pci 0000:00:0e.0: reg 20: [io 0xff00-0xff0f]
[ 0.077355] pci 0000:00:0e.1: [10b9:5289] type 0 class 0x000180
[ 0.077365] pci 0000:00:0e.1: reg 10: [io 0xfe00-0xfe07]
[ 0.077373] pci 0000:00:0e.1: reg 14: [io 0xfd00-0xfd03]
[ 0.077380] pci 0000:00:0e.1: reg 18: [io 0xfc00-0xfc07]
[ 0.077388] pci 0000:00:0e.1: reg 1c: [io 0xfb00-0xfb03]
[ 0.077396] pci 0000:00:0e.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.077426] pci 0000:00:0f.0: [10b9:5237] type 0 class 0x000c03
[ 0.077437] pci 0000:00:0f.0: reg 10: [mem 0xfdffd000-0xfdffdfff]
[ 0.077479] pci 0000:00:0f.1: [10b9:5237] type 0 class 0x000c03
[ 0.077489] pci 0000:00:0f.1: reg 10: [mem 0xfdffc000-0xfdffcfff]
[ 0.077531] pci 0000:00:0f.2: [10b9:5237] type 0 class 0x000c03
[ 0.077541] pci 0000:00:0f.2: reg 10: [mem 0xfdffb000-0xfdffbfff]
[ 0.077586] pci 0000:00:0f.3: [10b9:5239] type 0 class 0x000c03
[ 0.077599] pci 0000:00:0f.3: reg 10: [mem 0xfdffa000-0xfdffa0ff]
[ 0.077639] pci 0000:00:0f.3: PME# supported from D0 D3hot D3cold
[ 0.077643] pci 0000:00:0f.3: PME# disabled
[ 0.077671] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.077702] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.077728] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.077755] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.077781] PCI: peer root bus 00 res updated from pci conf
[ 0.077810] pci 0000:01:00.0: [10de:0326] type 0 class 0x000300
[ 0.077825] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.077834] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff pref]
[ 0.077862] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.077911] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.077916] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.077922] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.077928] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xefffffff pref]
[ 0.077973] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.077978] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.077983] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.077989] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.078003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.078183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[ 0.078451] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.113006] ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.113331] ACPI: PCI Interrupt Link [LNK2] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.113652] ACPI: PCI Interrupt Link [LNK3] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.113974] ACPI: PCI Interrupt Link [LNK4] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.114298] ACPI: PCI Interrupt Link [LNK5] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.114620] ACPI: PCI Interrupt Link [LNK6] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.114941] ACPI: PCI Interrupt Link [LNK7] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.115263] ACPI: PCI Interrupt Link [LNK8] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.115486] ACPI: PCI Interrupt Link [LNK9] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.115693] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.115697] vgaarb: loaded
[ 0.115699] vgaarb: bridge control possible 0000:01:00.0
[ 0.115770] PCI: Using ACPI for IRQ routing
[ 0.115775] PCI: pci_cache_line_size set to 64 bytes
[ 0.115788] pci 0000:00:00.0: address space collision: [mem 0xf0000000-0xf7ffffff pref] conflicts with GART [mem 0xf0000000-0xf7ffffff]
[ 0.115848] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.115853] reserve RAM buffer: 000000002fff0000 - 000000002fffffff
[ 0.118532] pnp: PnP ACPI init
[ 0.118558] ACPI: bus type pnp registered
[ 0.118788] pnp 00:00: [mem 0x000f0000-0x000f3fff]
[ 0.118793] pnp 00:00: [mem 0x000f4000-0x000f7fff]
[ 0.118796] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.118800] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.118804] pnp 00:00: [mem 0x2fff0000-0x2fffffff]
[ 0.118808] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.118811] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.118815] pnp 00:00: [mem 0x00100000-0x2ffeffff]
[ 0.118819] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[ 0.118823] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 0.118833] pnp 00:00: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.118839] pnp 00:00: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.118846] pnp 00:00: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.118852] pnp 00:00: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.118858] pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.118864] pnp 00:00: disabling [mem 0x00100000-0x2ffeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[ 0.118954] system 00:00: [mem 0x2fff0000-0x2fffffff] could not be reserved
[ 0.118959] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.118964] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.118969] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.118975] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.119065] pnp 00:01: [bus 00-ff]
[ 0.119070] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.119074] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.119078] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.119081] pnp 00:01: [io 0x5000-0x501f]
[ 0.119085] pnp 00:01: [io 0x4000-0x407f]
[ 0.119089] pnp 00:01: [io 0x04d6]
[ 0.119093] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.119097] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[ 0.119101] pnp 00:01: [mem 0x30000000-0xfebfffff window]
[ 0.119174] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.119570] pnp 00:02: [io 0x0010-0x001f]
[ 0.119573] pnp 00:02: [io 0x0022-0x003f]
[ 0.119577] pnp 00:02: [io 0x0044-0x005f]
[ 0.119580] pnp 00:02: [io 0x0062-0x0063]
[ 0.119586] pnp 00:02: [io 0x0065-0x006f]
[ 0.119590] pnp 00:02: [io 0x0074-0x007f]
[ 0.119593] pnp 00:02: [io 0x0091-0x0093]
[ 0.119596] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.119600] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.119604] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.119607] pnp 00:02: [io 0x0290-0x029f]
[ 0.119611] pnp 00:02: [io 0x0200-0x0205]
[ 0.119614] pnp 00:02: [io 0x0480-0x048f]
[ 0.119695] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.119700] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.119704] system 00:02: [io 0x0200-0x0205] has been reserved
[ 0.119709] system 00:02: [io 0x0480-0x048f] has been reserved
[ 0.119714] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.119734] pnp 00:03: [dma 4]
[ 0.119738] pnp 00:03: [io 0x0000-0x000f]
[ 0.119741] pnp 00:03: [io 0x0080-0x0090]
[ 0.119745] pnp 00:03: [io 0x0094-0x009f]
[ 0.119748] pnp 00:03: [io 0x00c0-0x00df]
[ 0.119794] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.119814] pnp 00:04: [io 0x0070-0x0073]
[ 0.119835] pnp 00:04: [irq 8]
[ 0.119882] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.119897] pnp 00:05: [io 0x0061]
[ 0.119944] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.119960] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.119974] pnp 00:06: [irq 13]
[ 0.120043] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.120272] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.120276] pnp 00:07: [io 0x03f7]
[ 0.120290] pnp 00:07: [irq 6]
[ 0.120294] pnp 00:07: [dma 2]
[ 0.120370] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.120661] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.120675] pnp 00:08: [irq 4]
[ 0.120770] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.121081] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.121096] pnp 00:09: [irq 3]
[ 0.121188] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.121618] pnp 00:0a: [io 0x0378-0x037f]
[ 0.121632] pnp 00:0a: [irq 7]
[ 0.121719] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.121900] pnp 00:0b: [irq 12]
[ 0.121947] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.121985] pnp 00:0c: [io 0x0060]
[ 0.121989] pnp 00:0c: [io 0x0064]
[ 0.122002] pnp 00:0c: [irq 1]
[ 0.122053] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.122310] pnp: PnP ACPI: found 13 devices
[ 0.122313] ACPI: ACPI bus type pnp unregistered
[ 0.129735] Switching to clocksource acpi_pm
[ 0.129771] PCI: max bus depth: 1 pci_try_num: 2
[ 0.129801] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 0.129806] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.129810] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.129817] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.129822] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xefffffff pref]
[ 0.129829] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.129834] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.129840] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.129845] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.129858] pci 0000:00:01.0: setting latency timer to 64
[ 0.129867] pci 0000:00:02.0: setting latency timer to 64
[ 0.129872] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.129876] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.129880] pci_bus 0000:00: resource 6 [mem 0x30000000-0xfcffffffff]
[ 0.129884] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.129888] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.129891] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
[ 0.129895] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.129899] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.129903] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.130042] NET: Registered protocol family 2
[ 0.130185] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.131038] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.131038] Switched to NOHz mode on CPU #0
[ 0.131312] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.132252] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.132256] TCP reno registered
[ 0.132272] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.132294] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.132505] NET: Registered protocol family 1
[ 0.132565] PCI: CLS mismatch (32 != 512), using 64 bytes
[ 0.132636] pci 0000:01:00.0: Boot video device
[ 0.132710] Unpacking initramfs...
[ 0.506547] Freeing initrd memory: 9444k freed
[ 0.515509] agpgart-amd64 0000:00:00.0: AGP bridge [10b9/1689]
[ 0.515519] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 0.515528] agpgart-amd64 0000:00:00.0: setting up ULi AGP
[ 0.519674] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 0.520216] audit: initializing netlink socket (disabled)
[ 0.520232] type=2000 audit(1312303222.520:1): initialized
[ 0.544413] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.552288] VFS: Disk quotas dquot_6.5.2
[ 0.552346] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.552461] msgmni has been set to 1494
[ 0.552701] alg: No test for stdrng (krng)
[ 0.552758] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.552763] io scheduler noop registered
[ 0.552766] io scheduler deadline registered
[ 0.552801] io scheduler cfq registered (default)
[ 0.553189] ERST: Table is not found!
[ 0.553303] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.573660] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.594033] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.614662] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.635056] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.635314] Linux agpgart interface v0.103
[ 0.635467] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.638758] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.638768] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.638949] mousedev: PS/2 mouse device common for all mice
[ 0.639009] rtc_cmos 00:04: RTC can wake from S4
[ 0.639127] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.639165] rtc0: alarms up to one month, 242 bytes nvram
[ 0.639183] cpuidle: using governor ladder
[ 0.639186] cpuidle: using governor menu
[ 0.639551] TCP cubic registered
[ 0.639663] NET: Registered protocol family 10
[ 0.640568] Mobile IPv6
[ 0.640572] NET: Registered protocol family 17
[ 0.640579] Registering the dns_resolver key type
[ 0.640777] PM: Hibernation image not present or could not be loaded.
[ 0.640796] registered taskstats version 1
[ 0.644836] rtc_cmos 00:04: setting system clock to 2011-08-02 16:40:23 UTC (1312303223)
[ 0.644885] Initializing network drop monitor service
[ 0.646814] Freeing unused kernel memory: 560k freed
[ 0.647235] Write protecting the kernel read-only data: 6144k
[ 0.653398] Freeing unused kernel memory: 756k freed
[ 0.659790] Freeing unused kernel memory: 740k freed
[ 0.669591] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.688231] udevd[46]: starting version 172
[ 0.750264] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 0.791794] uli526x 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.819725] usbcore: registered new interface driver usbfs
[ 0.819764] usbcore: registered new interface driver hub
[ 0.826285] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.826290] ACPI: Thermal Zone [THRM] (40 C)
[ 0.838125] ACPI: Fan [FAN] (on)
[ 0.863780] SCSI subsystem initialized
[ 0.880479] usbcore: registered new device driver usb
[ 0.881316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.898022] FDC 0 is a post-1991 82077
[ 0.918560] libata version 3.00 loaded.
[ 0.953116] uli526x 0000:00:0d.0: eth0: ULi M5263 at pci0000:00:0d.0, 00:30:18:aa:28:bd, irq 17
[ 0.959070] ehci_hcd 0000:00:0f.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.959095] ehci_hcd 0000:00:0f.3: EHCI Host Controller
[ 0.959133] ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1
[ 0.959173] ehci_hcd 0000:00:0f.3: debug port 1
[ 0.980064] ehci_hcd 0000:00:0f.3: irq 23, io mem 0xfdffa000
[ 0.992018] ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00
[ 0.992057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.992062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.992066] usb usb1: Product: EHCI Host Controller
[ 0.992070] usb usb1: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd
[ 0.992073] usb usb1: SerialNumber: 0000:00:0f.3
[ 0.992258] hub 1-0:1.0: USB hub found
[ 0.992266] hub 1-0:1.0: 8 ports detected
[ 0.993121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.993702] ohci_hcd 0000:00:0f.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.993727] ohci_hcd 0000:00:0f.0: OHCI Host Controller
[ 0.993748] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
[ 0.993809] ohci_hcd 0000:00:0f.0: irq 20, io mem 0xfdffd000
[ 1.050033] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050038] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050042] usb usb2: Product: OHCI Host Controller
[ 1.050046] usb usb2: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 1.050049] usb usb2: SerialNumber: 0000:00:0f.0
[ 1.050346] hub 2-0:1.0: USB hub found
[ 1.050356] hub 2-0:1.0: 3 ports detected
[ 1.050557] ohci_hcd 0000:00:0f.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.050581] ohci_hcd 0000:00:0f.1: OHCI Host Controller
[ 1.050594] ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
[ 1.050649] ohci_hcd 0000:00:0f.1: irq 21, io mem 0xfdffc000
[ 1.106041] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.106047] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.106051] usb usb3: Product: OHCI Host Controller
[ 1.106055] usb usb3: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 1.106058] usb usb3: SerialNumber: 0000:00:0f.1
[ 1.106360] hub 3-0:1.0: USB hub found
[ 1.106370] hub 3-0:1.0: 3 ports detected
[ 1.106568] ohci_hcd 0000:00:0f.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.106594] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 1.106607] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 4
[ 1.106662] ohci_hcd 0000:00:0f.2: irq 22, io mem 0xfdffb000
[ 1.162026] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.162030] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.162034] usb usb4: Product: OHCI Host Controller
[ 1.162037] usb usb4: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 1.162040] usb usb4: SerialNumber: 0000:00:0f.2
[ 1.162344] hub 4-0:1.0: USB hub found
[ 1.162353] hub 4-0:1.0: 3 ports detected
[ 1.163651] pata_ali 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.166896] scsi0 : pata_ali
[ 1.167209] scsi1 : pata_ali
[ 1.167728] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.167733] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.170307] sata_uli 0000:00:0e.1: version 1.3
[ 1.170325] sata_uli 0000:00:0e.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.170982] scsi2 : sata_uli
[ 1.171135] scsi3 : sata_uli
[ 1.171206] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[ 1.171211] ata4: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[ 1.332254] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL01, max UDMA/66
[ 1.332261] ata1.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 1.332266] ata1.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 1.348137] ata1.00: configured for UDMA/66
[ 1.353823] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H12N UL01 PQ: 0 ANSI: 5
[ 1.540020] Refined TSC clocksource calibration: 1599.948 MHz.
[ 1.540027] Switching to clocksource tsc
[ 1.976040] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.984225] ata4.00: HPA detected: current 156299375, native 156301488
[ 1.984233] ata4.00: ATA-7: WDC WD800JD-55MUA1, 10.01E01, max UDMA/133
[ 1.984237] ata4.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.992226] ata4.00: configured for UDMA/133
[ 1.992366] scsi 3:0:0:0: Direct-Access ATA WDC WD800JD-55MU 10.0 PQ: 0 ANSI: 5
[ 2.007108] sd 3:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.007178] sd 3:0:0:0: [sda] Write Protect is off
[ 2.007183] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.007212] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.013793] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.013799] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.014381] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.025394] sda: sda1 sda2 sda3
[ 2.025979] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.031374] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.031464] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.446296] PM: Starting manual resume from disk
[ 2.446302] PM: Hibernation image partition 8:2 present
[ 2.446305] PM: Looking for hibernation image.
[ 2.446532] PM: Image not found (code -22)
[ 2.446536] PM: Hibernation image not present or could not be loaded.
[ 2.506698] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.850020] udevd[251]: starting version 172
[ 4.436781] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 4.436790] ACPI: Power Button [PWRB]
[ 4.436898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.436903] ACPI: Power Button [PWRF]
[ 4.436990] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 4.436995] ACPI: Sleep Button [SLPF]
[ 4.520083] ACPI: acpi_idle registered with cpuidle
[ 4.554195] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.799411] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.832288] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
[ 4.832295] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
[ 4.835521] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x5000
[ 4.846160] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.876359] parport_pc 00:0a: reported by Plug and Play ACPI
[ 4.876488] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.879255] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 4.879310] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
[ 4.924304] MCE: In-kernel MCE decoding enabled.
[ 4.985025] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[ 4.985039] alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
[ 5.113211] EDAC MC: Ver: 2.1.0
[ 5.154938] AMD64 EDAC driver v3.4.0
[ 5.155359] EDAC amd64: DRAM ECC disabled.
[ 5.155366] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.155369] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.155371] (Note that use of the override may cause unknown side effects.)
[ 5.262408] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 5.311610] Intel ICH 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.372038] intel8x0_measure_ac97_clock: measured 52367 usecs (2528 samples)
[ 5.372043] intel8x0: clocking to 48000
[ 5.695483] Disabling lock debugging due to kernel taint
[ 5.695493] nvidia: module license 'NVIDIA' taints kernel.
[ 6.657347] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.657359] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.657678] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.30 Sat Apr 16 21:49:29 PDT 2011
[ 8.229236] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.528532] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.668981] loop: module loaded
[ 9.208982] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.875556] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.880368] uli526x 0000:00:0d.0: eth0: NIC Link is Up 100 Mbps Full duplex
[ 12.880815] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.036526] PPP generic driver version 2.4.2
[ 23.056024] eth0: no IPv6 routers present
[ 23.541439] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 23.541460] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 23.541496] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 32.702627] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 32.813022] EXT4-fs (sda3): re-mounted. Opts: user_xattr,commit=0

[свернуть]

lspci

Открыть содержимое (спойлер)

00:00.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip]
00:01.0 PCI bridge: ALi Corporation AGP8X Controller
00:02.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:03.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
00:03.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:04.0 Multimedia audio controller: ALi Corporation M5455 PCI AC-Link Controller Audio Device (rev 20)
00:0d.0 Ethernet controller: ALi Corporation ULi 1689,1573 integrated ethernet. (rev 40)
00:0e.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
00:0e.1 Mass storage controller: ALi Corporation ULi 5289 SATA (rev 10)
00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)

[свернуть]

lsmod | grep ali
i2c_ali15x3 12546 0
i2c_ali1563 12635 0
i2c_ali1535 12546 0
i2c_core 23909 4 nvidia,i2c_ali15x3,i2c_ali1563,i2c_ali1535
pata_ali 13026 0
libata 149043 3 ata_generic,sata_uli,pata_ali

Как убрать эти сообщения? BIOS разумеется последний. Гуглил я долго и упорно, наиболее полне описание здесь, но проблему так и не решили. Пробовал лайв Fedora 15, так там нет вообще таких сообщений.

Русскоязычное сообщество Debian GNU/Linux

Проблемы с ALI 15**

paulcarroty