Автор Тема: Jessie, Bumbebee + nvidia Странные помехи по всему экрану  (Прочитано 1714 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн turgon

  • Пользователь
  • *
  • Topic Author
  • Сообщений: 19
Почему то появляются такие помехи (просоеденен снимок экрана).
Иногда появляется когда использую прокрутку в браузере, иногда когда появляется какое то новое окно..
На других дистрах такого не встречал с тем же оборудованием.

Помогите  :(
 


Оффлайн _Semen1991_

  • Пользователь
  • *
  • Сообщений: 15
А что в этот момент пишется в /var/log/Xorg.log? (или Xorg.0.log)
 

Оффлайн turgon

  • Пользователь
  • *
  • Topic Author
  • Сообщений: 19
Без понятия..
Есть Xorg.0.log и Xorg.8.log,
а в них только новые данные..

Как только появится, опять глюки, сразу посмотрю.
 

Оффлайн vadd

  • Местный житель
  • ***
  • Сообщений: 183
драйвер видео
 

Оффлайн turgon

  • Пользователь
  • *
  • Topic Author
  • Сообщений: 19
драйвер видео
Предлагаете обновить драйвер на более новую версию?
 

Оффлайн alsoijw

  • Fedora 25 GNOME 3 amd64
  • Ветеран
  • *****
  • Сообщений: 1231
turgon, какой драйвер видео используете?
Мало видеть нам начало - надо видеть и конец. Если видишь ты создание - значит где-то есть ТВОРЕЦ
Многие жалуются: геометрия в жизни не пригодилась. Ямб от хорея им приходится отличать ежедневно?
 

Оффлайн turgon

  • Пользователь
  • *
  • Topic Author
  • Сообщений: 19
Re: Jessie, Bumbebee + nvidia Странные помехи по всему экрану
« Ответ #5 : Сегодня в 12:19:24 »
340.96-1
 

Оффлайн vadd

  • Местный житель
  • ***
  • Сообщений: 183
Предлагаете обновить драйвер на более новую версию?

Не факт что обновить.  Возможно на ваше видео просто нужен другой другой драйвер.  Возможно ваш не очень корректно встал  вместо нувешного.
У меня были похожие артефакты пока не поставил подходящий.
 

Оффлайн turgon

  • Пользователь
  • *
  • Topic Author
  • Сообщений: 19
Предлагаете обновить драйвер на более новую версию?

Не факт что обновить.  Возможно на ваше видео просто нужен другой другой драйвер.  Возможно ваш не очень корректно встал  вместо нувешного.
У меня были похожие артефакты пока не поставил подходящий.

Попробовал поставить nvidia + bumblebee из jessie-backports, так там из за кокого то пакета не пошло (glx-alternative по моему)..
Нвидиа как то не пользуюсь вообще, может поставить bumblebee + nouveau?
 

Оффлайн vadd

  • Местный житель
  • ***
  • Сообщений: 183
Может быть,  хотя нувё мне кажется не лучшим вариантом для нвидиа.
Посмотрите еще здесь, может что-нибудь из рекомендованного изготовителем подойдет?
http://www.nvidia.com/object/unix.html
http://www.nvidia.ru/object/linux-display-archive-ru.html
 

Оффлайн turgon

  • Пользователь
  • *
  • Topic Author
  • Сообщений: 19
Вот случилось ещё несколько раз и сразу вытащил логи..
Может быть прольёт свет на эту загадку..

Xorg.0.log
[    21.475]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    21.475] X Protocol Version 11, Revision 0
[    21.475] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    21.475] Current Operating System: Linux mlp 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29) x86_64
[    21.475] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=8605a3c5-f825-4ed4-8525-441f900f98b9 ro apparmor=1 security=apparmor quiet splash
[    21.475] Build Date: 11 February 2015  12:32:02AM
[    21.475] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[    21.475] Current version of pixman: 0.33.6
[    21.475] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    21.475] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.476] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 19 14:02:37 2016
[    21.521] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.722] (==) No Layout section.  Using the first Screen section.
[    21.722] (==) No screen section available. Using defaults.
[    21.722] (**) |-->Screen "Default Screen Section" (0)
[    21.722] (**) |   |-->Monitor "<default monitor>"
[    21.729] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    21.729] (==) Automatically adding devices
[    21.729] (==) Automatically enabling devices
[    21.729] (==) Automatically adding GPU devices
[    21.795] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    21.795] Entry deleted from font path.
[    21.808] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[    21.808] (==) ModulePath set to "/usr/lib/xorg/modules"
[    21.808] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.825] (II) Loader magic: 0x7fa8c97f0d80
[    21.825] (II) Module ABI versions:
[    21.825] X.Org ANSI C Emulation: 0.4
[    21.825] X.Org Video Driver: 18.0
[    21.825] X.Org XInput driver : 21.0
[    21.825] X.Org Server Extension : 8.0
[    21.825] (II) xfree86: Adding drm device (/dev/dri/card0)
[    21.825] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[    21.827] (--) PCI:*(0:0:2:0) 8086:0166:144d:c711 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    21.827] (II) LoadModule: "glx"
[    21.871] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    22.305] (II) Module glx: vendor="X.Org Foundation"
[    22.305] compiled for 1.16.4, module version = 1.0.0
[    22.305] ABI class: X.Org Server Extension, version 8.0
[    22.305] (==) AIGLX enabled
[    22.305] (==) Matched intel as autoconfigured driver 0
[    22.305] (==) Matched modesetting as autoconfigured driver 1
[    22.305] (==) Matched fbdev as autoconfigured driver 2
[    22.305] (==) Matched vesa as autoconfigured driver 3
[    22.305] (==) Assigned the driver to the xf86ConfigLayout
[    22.305] (II) LoadModule: "intel"
[    22.306] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    22.376] (II) Module intel: vendor="X.Org Foundation"
[    22.376] compiled for 1.15.99.904, module version = 2.21.15
[    22.376] Module class: X.Org Video Driver
[    22.376] ABI class: X.Org Video Driver, version 18.0
[    22.376] (II) LoadModule: "modesetting"
[    22.377] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    22.391] (II) Module modesetting: vendor="X.Org Foundation"
[    22.391] compiled for 1.16.4, module version = 0.9.0
[    22.391] Module class: X.Org Video Driver
[    22.391] ABI class: X.Org Video Driver, version 18.0
[    22.391] (II) LoadModule: "fbdev"
[    22.392] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    22.396] (II) Module fbdev: vendor="X.Org Foundation"
[    22.396] compiled for 1.15.99.904, module version = 0.4.4
[    22.396] Module class: X.Org Video Driver
[    22.396] ABI class: X.Org Video Driver, version 18.0
[    22.396] (II) LoadModule: "vesa"
[    22.396] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    22.520] (II) Module vesa: vendor="X.Org Foundation"
[    22.520] compiled for 1.15.99.904, module version = 2.3.3
[    22.520] Module class: X.Org Video Driver
[    22.520] ABI class: X.Org Video Driver, version 18.0
[    22.520] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    22.521] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    22.521] (II) FBDEV: driver for framebuffer: fbdev
[    22.521] (II) VESA: driver for VESA chipsets: vesa
[    22.521] (++) using VT number 8

[    22.575] (WW) Falling back to old probe method for modesetting
[    22.575] (WW) Falling back to old probe method for fbdev
[    22.575] (II) Loading sub module "fbdevhw"
[    22.575] (II) LoadModule: "fbdevhw"
[    22.575] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    22.594] (II) Module fbdevhw: vendor="X.Org Foundation"
[    22.594] compiled for 1.16.4, module version = 0.0.2
[    22.594] ABI class: X.Org Video Driver, version 18.0
[    22.594] (WW) Falling back to old probe method for vesa
[    22.594] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    22.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    22.594] (==) intel(0): RGB weight 888
[    22.594] (==) intel(0): Default visual is TrueColor
[    22.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    22.594] (**) intel(0): Relaxed fencing enabled
[    22.594] (**) intel(0): Wait on SwapBuffers? enabled
[    22.594] (**) intel(0): Triple buffering? enabled
[    22.594] (**) intel(0): Framebuffer tiled
[    22.594] (**) intel(0): Pixmaps tiled
[    22.594] (**) intel(0): 3D buffers tiled
[    22.594] (**) intel(0): SwapBuffers wait enabled
[    22.594] (==) intel(0): video overlay key set to 0x101fe
[    22.594] (II) intel(0): Output LVDS1 has no monitor section
[    22.595] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    22.596] (II) intel(0): Output VGA1 has no monitor section
[    22.597] (II) intel(0): Output HDMI1 has no monitor section
[    22.597] (II) intel(0): Output DP1 has no monitor section
[    22.597] (II) intel(0): EDID for output LVDS1
[    22.597] (II) intel(0): Manufacturer: CMN  Model: 15b8  Serial#: 0
[    22.597] (II) intel(0): Year: 2012  Week: 24
[    22.597] (II) intel(0): EDID Version: 1.3
[    22.597] (II) intel(0): Digital Display Input
[    22.597] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    22.597] (II) intel(0): Gamma: 2.20
[    22.597] (II) intel(0): No DPMS capabilities specified
[    22.597] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    22.597] (II) intel(0): First detailed timing is preferred mode
[    22.597] (II) intel(0): redX: 0.577 redY: 0.364   greenX: 0.348 greenY: 0.563
[    22.597] (II) intel(0): blueX: 0.151 blueY: 0.116   whiteX: 0.313 whiteY: 0.329
[    22.597] (II) intel(0): Manufacturer's mask: 0
[    22.597] (II) intel(0): Supported detailed timing:
[    22.597] (II) intel(0): clock: 70.7 MHz   Image Size:  344 x 194 mm
[    22.597] (II) intel(0): h_active: 1366  h_sync: 1406  h_sync_end 1432 h_blank_end 1498 h_border: 0
[    22.597] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 778 v_blanking: 786 v_border: 0
[    22.597] (II) intel(0):  CMN
[    22.598] (II) intel(0):  N156BGE-L31
[    22.598] (II) intel(0): EDID (in hex):
[    22.598] (II) intel(0): 00ffffffffffff000daeb81500000000
[    22.598] (II) intel(0): 18160103802213780ad1f5935d599026
[    22.598] (II) intel(0): 1d505400000001010101010101010101
[    22.598] (II) intel(0): 0101010101019e1b568450001230281a
[    22.598] (II) intel(0): 460058c210000018a60000fe004e3135
[    22.598] (II) intel(0): 364247452d4c33310a20000000fe0043
[    22.598] (II) intel(0): 4d4e0a202020202020202020000000fe
[    22.598] (II) intel(0): 004e3135364247452d4c33310a20006a
[    22.598] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    22.598] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    22.598] (II) intel(0): Printing probed modes for output LVDS1
[    22.598] (II) intel(0): Modeline "1366x768"x60.0   70.70  1366 1406 1432 1498  768 772 778 786 -hsync -vsync (47.2 kHz eP)
[    22.598] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    22.598] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    22.598] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    22.598] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    22.598] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    22.598] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    22.599] (II) intel(0): EDID for output VGA1
[    22.600] (II) intel(0): EDID for output HDMI1
[    22.600] (II) intel(0): EDID for output DP1
[    22.600] (II) intel(0): Output LVDS1 connected
[    22.600] (II) intel(0): Output VGA1 disconnected
[    22.600] (II) intel(0): Output HDMI1 disconnected
[    22.600] (II) intel(0): Output DP1 disconnected
[    22.600] (II) intel(0): Using exact sizes for initial modes
[    22.600] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    22.600] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    22.600] (II) intel(0): Kernel page flipping support detected, enabling
[    22.600] (==) intel(0): DPI set to (96, 96)
[    22.600] (II) Loading sub module "fb"
[    22.600] (II) LoadModule: "fb"
[    22.601] (II) Loading /usr/lib/xorg/modules/libfb.so
[    22.622] (II) Module fb: vendor="X.Org Foundation"
[    22.622] compiled for 1.16.4, module version = 1.0.0
[    22.622] ABI class: X.Org ANSI C Emulation, version 0.4
[    22.622] (II) Loading sub module "dri2"
[    22.622] (II) LoadModule: "dri2"
[    22.622] (II) Module "dri2" already built-in
[    22.622] (II) UnloadModule: "modesetting"
[    22.622] (II) Unloading modesetting
[    22.622] (II) UnloadModule: "fbdev"
[    22.622] (II) Unloading fbdev
[    22.622] (II) UnloadSubModule: "fbdevhw"
[    22.622] (II) Unloading fbdevhw
[    22.622] (II) UnloadModule: "vesa"
[    22.622] (II) Unloading vesa
[    22.622] (==) Depth 24 pixmap format is 32 bpp
[    22.647] (II) intel(0): [DRI2] Setup complete
[    22.647] (II) intel(0): [DRI2]   DRI driver: i965
[    22.647] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    22.664] (II) UXA(0): Driver registered support for the following operations:
[    22.664] (II)         solid
[    22.664] (II)         copy
[    22.664] (II)         composite (RENDER acceleration)
[    22.664] (II)         put_image
[    22.664] (II)         get_image
[    22.664] (==) intel(0): Backing store enabled
[    22.664] (==) intel(0): Silken mouse enabled
[    22.698] (II) intel(0): Initializing HW Cursor
[    22.698] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    22.702] (==) intel(0): DPMS enabled
[    22.702] (==) intel(0): Intel XvMC decoder enabled
[    22.702] (II) intel(0): Set up textured video
[    22.702] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    22.702] (II) intel(0): direct rendering: DRI2 Enabled
[    22.702] (==) intel(0): hotplug detection: "enabled"
[    22.728] (--) RandR disabled
[    22.736] (II) SELinux: Disabled on system
[    23.068] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.068] (II) AIGLX: enabled GLX_ARB_create_context
[    23.068] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    23.068] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    23.068] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.068] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.068] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    23.068] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    23.068] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.068] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    23.068] (II) AIGLX: Loaded and initialized i965
[    23.068] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.069] (II) intel(0): Setting screen physical size to 361 x 203
[    23.433] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    23.433] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.433] (II) LoadModule: "evdev"
[    23.433] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.458] (II) Module evdev: vendor="X.Org Foundation"
[    23.458] compiled for 1.16.0, module version = 2.9.0
[    23.458] Module class: X.Org XInput Driver
[    23.458] ABI class: X.Org XInput driver, version 21.0
[    23.458] (II) Using input driver 'evdev' for 'Power Button'
[    23.458] (**) Power Button: always reports core events
[    23.459] (**) evdev: Power Button: Device: "/dev/input/event3"
[    23.459] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.459] (--) evdev: Power Button: Found keys
[    23.459] (II) evdev: Power Button: Configuring as keyboard
[    23.459] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[    23.459] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.459] (**) Option "xkb_rules" "evdev"
[    23.459] (**) Option "xkb_model" "pc105"
[    23.459] (**) Option "xkb_layout" "us"
[    23.460] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    23.460] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.460] (II) Using input driver 'evdev' for 'Video Bus'
[    23.460] (**) Video Bus: always reports core events
[    23.460] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    23.460] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.460] (--) evdev: Video Bus: Found keys
[    23.460] (II) evdev: Video Bus: Configuring as keyboard
[    23.460] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6/event5"
[    23.460] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    23.460] (**) Option "xkb_rules" "evdev"
[    23.460] (**) Option "xkb_model" "pc105"
[    23.460] (**) Option "xkb_layout" "us"
[    23.461] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    23.461] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.461] (II) Using input driver 'evdev' for 'Video Bus'
[    23.461] (**) Video Bus: always reports core events
[    23.461] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    23.461] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.461] (--) evdev: Video Bus: Found keys
[    23.461] (II) evdev: Video Bus: Configuring as keyboard
[    23.461] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:00/input/input5/event4"
[    23.461] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    23.461] (**) Option "xkb_rules" "evdev"
[    23.461] (**) Option "xkb_model" "pc105"
[    23.461] (**) Option "xkb_layout" "us"
[    23.462] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    23.462] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.462] (II) Using input driver 'evdev' for 'Power Button'
[    23.462] (**) Power Button: always reports core events
[    23.462] (**) evdev: Power Button: Device: "/dev/input/event2"
[    23.462] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.462] (--) evdev: Power Button: Found keys
[    23.462] (II) evdev: Power Button: Configuring as keyboard
[    23.462] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    23.462] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    23.462] (**) Option "xkb_rules" "evdev"
[    23.462] (**) Option "xkb_model" "pc105"
[    23.462] (**) Option "xkb_layout" "us"
[    23.462] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    23.462] (II) No input driver specified, ignoring this device.
[    23.462] (II) This device may have been added with another device file.
[    23.463] (II) config/udev: Adding drm device (/dev/dri/card0)
[    23.463] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.463] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[    23.463] (II) config/udev: Adding input device Webcam SC-10HDD12636P (/dev/input/event11)
[    23.463] (**) Webcam SC-10HDD12636P: Applying InputClass "evdev keyboard catchall"
[    23.463] (II) Using input driver 'evdev' for 'Webcam SC-10HDD12636P'
[    23.463] (**) Webcam SC-10HDD12636P: always reports core events
[    23.463] (**) evdev: Webcam SC-10HDD12636P: Device: "/dev/input/event11"
[    23.463] (--) evdev: Webcam SC-10HDD12636P: Vendor 0xc45 Product 0x64e0
[    23.463] (--) evdev: Webcam SC-10HDD12636P: Found keys
[    23.463] (II) evdev: Webcam SC-10HDD12636P: Configuring as keyboard
[    23.463] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input12/event11"
[    23.463] (II) XINPUT: Adding extended input device "Webcam SC-10HDD12636P" (type: KEYBOARD, id 10)
[    23.464] (**) Option "xkb_rules" "evdev"
[    23.464] (**) Option "xkb_model" "pc105"
[    23.464] (**) Option "xkb_layout" "us"
[    23.464] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[    23.464] (II) No input driver specified, ignoring this device.
[    23.464] (II) This device may have been added with another device file.
[    23.465] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    23.465] (II) No input driver specified, ignoring this device.
[    23.465] (II) This device may have been added with another device file.
[    23.465] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[    23.465] (II) No input driver specified, ignoring this device.
[    23.465] (II) This device may have been added with another device file.
[    23.465] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    23.465] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    23.465] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    23.465] (**) AT Translated Set 2 keyboard: always reports core events
[    23.465] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    23.465] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    23.466] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    23.466] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    23.466] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    23.466] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    23.466] (**) Option "xkb_rules" "evdev"
[    23.466] (**) Option "xkb_model" "pc105"
[    23.466] (**) Option "xkb_layout" "us"
[    23.466] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[    23.466] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    23.466] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    23.466] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    23.466] (II) LoadModule: "synaptics"
[    23.467] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    23.473] (II) Module synaptics: vendor="X.Org Foundation"
[    23.473] compiled for 1.16.0.901, module version = 1.8.99
[    23.473] Module class: X.Org XInput Driver
[    23.473] ABI class: X.Org XInput driver, version 21.0
[    23.473] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    23.473] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.473] (**) Option "Device" "/dev/input/event10"
[    23.510] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940 (res 0)
[    23.510] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1400 (res 0)
[    23.510] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    23.510] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    23.510] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    23.510] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    23.510] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.510] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.536] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event10"
[    23.536] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[    23.536] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    23.536] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    23.536] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.061
[    23.536] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    23.536] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    23.536] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    23.536] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    23.536] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.537] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    23.537] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    23.537] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    23.537] (II) No input driver specified, ignoring this device.
[    23.537] (II) This device may have been added with another device file.
[    87.360] (II) intel(0): EDID vendor "CMN", prod id 5560
[    87.360] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[    87.360] (II) intel(0): Printing DDC gathered Modelines:
[    87.360] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1406 1432 1498  768 772 778 786 -hsync -vsync (47.2 kHz eP)
[    89.171] (II) intel(0): EDID vendor "CMN", prod id 5560
[    89.171] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[    89.171] (II) intel(0): Printing DDC gathered Modelines:
[    89.171] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1406 1432 1498  768 772 778 786 -hsync -vsync (47.2 kHz eP)
[    92.068] (II) intel(0): EDID vendor "CMN", prod id 5560
[    92.068] (II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 0x846 mode
[    92.068] (II) intel(0): Printing DDC gathered Modelines:
[    92.068] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1406 1432 1498  768 772 778 786 -hsync -vsync (47.2 kHz eP)
[   101.210] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12)
[   101.210] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   101.210] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   101.210] (**) Logitech USB Receiver: always reports core events
[   101.210] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event12"
[   101.210] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[   101.210] (--) evdev: Logitech USB Receiver: Found keys
[   101.210] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   101.210] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C52E.0001/input/input13/event12"
[   101.210] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[   101.210] (**) Option "xkb_rules" "evdev"
[   101.210] (**) Option "xkb_model" "pc105"
[   101.210] (**) Option "xkb_layout" "us"
[   101.212] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[   101.212] (II) No input driver specified, ignoring this device.
[   101.212] (II) This device may have been added with another device file.
[   101.212] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event13)
[   101.212] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   101.212] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   101.212] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   101.212] (**) Logitech USB Receiver: always reports core events
[   101.212] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event13"
[   101.212] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[   101.212] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   101.212] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   101.212] (--) evdev: Logitech USB Receiver: Found relative axes
[   101.212] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   101.212] (--) evdev: Logitech USB Receiver: Found absolute axes
[   101.212] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   101.212] (--) evdev: Logitech USB Receiver: Found keys
[   101.212] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   101.213] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   101.213] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   101.213] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   101.213] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   101.213] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52E.0002/input/input14/event13"
[   101.213] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 14)
[   101.213] (**) Option "xkb_rules" "evdev"
[   101.213] (**) Option "xkb_model" "pc105"
[   101.213] (**) Option "xkb_layout" "us"
[   101.213] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   101.213] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   101.213] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   101.213] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   101.213] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   101.213] (**) Logitech USB Receiver: (accel) acceleration threshold: 4


Xorg.8.log
[   229.368]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[   229.369] X Protocol Version 11, Revision 0
[   229.369] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   229.369] Current Operating System: Linux mlp 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29) x86_64
[   229.369] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=8605a3c5-f825-4ed4-8525-441f900f98b9 ro quiet splash
[   229.369] Build Date: 11 February 2015  12:32:02AM
[   229.369] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[   229.369] Current version of pixman: 0.33.6
[   229.369] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[   229.369] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   229.369] (==) Log file: "/var/log/Xorg.8.log", Time: Wed Mar 16 14:29:50 2016
[   229.369] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[   229.369] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[   229.369] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   229.369] (==) ServerLayout "Layout0"
[   229.369] (==) No screen section available. Using defaults.
[   229.369] (**) |-->Screen "Default Screen Section" (0)
[   229.369] (**) |   |-->Monitor "<default monitor>"
[   229.369] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[   229.369] (**) |   |-->Device "DiscreteNvidia"
[   229.369] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[   229.369] (**) Option "AutoAddDevices" "false"
[   229.370] (**) Option "AutoAddGPU" "false"
[   229.370] (**) Not automatically adding devices
[   229.370] (==) Automatically enabling devices
[   229.370] (**) Not automatically adding GPU devices
[   229.370] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   229.370] Entry deleted from font path.
[   229.370] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[   229.370] (++) ModulePath set to "/usr/lib/nvidia,/usr/lib/xorg/modules"
[   229.370] (==) |-->Input Device "<default pointer>"
[   229.370] (==) |-->Input Device "<default keyboard>"
[   229.370] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[   229.370] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[   229.370] (II) Loader magic: 0x7f162e632d80
[   229.370] (II) Module ABI versions:
[   229.370] X.Org ANSI C Emulation: 0.4
[   229.370] X.Org Video Driver: 18.0
[   229.370] X.Org XInput driver : 21.0
[   229.370] X.Org Server Extension : 8.0
[   229.370] (II) xfree86: Adding drm device (/dev/dri/card1)
[   229.370] (II) xfree86: Adding drm device (/dev/dri/card0)
[   229.370] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[   229.372] (--) PCI:*(0:1:0:0) 10de:1140:144d:c711 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   229.372] (II) LoadModule: "glx"
[   229.372] (II) Loading /usr/lib/nvidia/libglx.so
[   229.384] (II) Module glx: vendor="NVIDIA Corporation"
[   229.384] compiled for 4.0.2, module version = 1.0.0
[   229.384] Module class: X.Org Server Extension
[   229.384] (II) NVIDIA GLX Module  340.96  Sun Nov  8 22:06:18 PST 2015
[   229.384] (II) LoadModule: "nvidia"
[   229.384] (II) Loading /usr/lib/nvidia/current/nvidia_drv.so
[   229.385] (II) Module nvidia: vendor="NVIDIA Corporation"
[   229.385] compiled for 4.0.2, module version = 1.0.0
[   229.385] Module class: X.Org Video Driver
[   229.385] (II) LoadModule: "mouse"
[   229.385] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[   229.385] (II) Module mouse: vendor="X.Org Foundation"
[   229.385] compiled for 1.16.1, module version = 1.9.1
[   229.385] Module class: X.Org XInput Driver
[   229.385] ABI class: X.Org XInput driver, version 21.0
[   229.385] (II) LoadModule: "kbd"
[   229.386] (WW) Warning, couldn't open module kbd
[   229.386] (II) UnloadModule: "kbd"
[   229.386] (II) Unloading kbd
[   229.386] (EE) Failed to load module "kbd" (module does not exist, 0)
[   229.386] (II) NVIDIA dlloader X Driver  340.96  Sun Nov  8 21:46:28 PST 2015
[   229.386] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   229.386] (--) using VT number 8

[   229.386] (II) Loading sub module "fb"
[   229.386] (II) LoadModule: "fb"
[   229.386] (II) Loading /usr/lib/xorg/modules/libfb.so
[   229.386] (II) Module fb: vendor="X.Org Foundation"
[   229.386] compiled for 1.16.4, module version = 1.0.0
[   229.386] ABI class: X.Org ANSI C Emulation, version 0.4
[   229.386] (WW) Unresolved symbol: fbGetGCPrivateKey
[   229.386] (II) Loading sub module "wfb"
[   229.386] (II) LoadModule: "wfb"
[   229.387] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   229.387] (II) Module wfb: vendor="X.Org Foundation"
[   229.387] compiled for 1.16.4, module version = 1.0.0
[   229.387] ABI class: X.Org ANSI C Emulation, version 0.4
[   229.387] (II) Loading sub module "ramdac"
[   229.387] (II) LoadModule: "ramdac"
[   229.387] (II) Module "ramdac" already built-in
[   229.387] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[   229.387] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   229.387] (==) NVIDIA(0): RGB weight 888
[   229.387] (==) NVIDIA(0): Default visual is TrueColor
[   229.387] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   229.387] (**) NVIDIA(0): Option "NoLogo" "true"
[   229.387] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[   229.388] (**) NVIDIA(0): Option "UseEDID" "false"
[   229.388] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[   229.388] (**) NVIDIA(0): Enabling 2D acceleration
[   229.388] (**) NVIDIA(0): Ignoring EDIDs
[   229.388] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[   229.388] (**) NVIDIA(0):     mode
[   232.308] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[   232.310] (II) NVIDIA(0): NVIDIA GPU GeForce 710M (GF117) at PCI:1:0:0 (GPU-0)
[   232.310] (--) NVIDIA(0): Memory: 2097152 kBytes
[   232.310] (--) NVIDIA(0): VideoBIOS: 75.17.58.00.0e
[   232.310] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[   232.310] (--) NVIDIA(0): Valid display device(s) on GeForce 710M at PCI:1:0:0
[   232.310] (--) NVIDIA(0):     none
[   232.310] (II) NVIDIA(0): Validated MetaModes:
[   232.310] (II) NVIDIA(0):     "NULL"
[   232.310] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[   232.310] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[   232.310] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[   232.310] (--) Depth 24 pixmap format is 32 bpp
[   232.310] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[   232.310] (II) NVIDIA:     access.
[   232.314] (II) NVIDIA(0): Setting mode "NULL"
[   232.314] (EE) NVIDIA(0): Failed to initiate mode change.
[   232.314] (EE) NVIDIA(0): Failed to complete mode change
[   232.330] (==) NVIDIA(0): Disabling shared memory pixmaps
[   232.330] (==) NVIDIA(0): Backing store enabled
[   232.330] (==) NVIDIA(0): Silken mouse enabled
[   232.330] (==) NVIDIA(0): DPMS enabled
[   232.330] (II) Loading sub module "dri2"
[   232.330] (II) LoadModule: "dri2"
[   232.330] (II) Module "dri2" already built-in
[   232.330] (II) NVIDIA(0): [DRI2] Setup complete
[   232.330] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   232.331] (--) RandR disabled
[   232.337] (II) SELinux: Disabled on system
[   232.337] (II) Initializing extension GLX
[   232.337] (II) Indirect GLX disabled.(II) Using input driver 'mouse' for '<default pointer>'
[   232.377] (**) Option "CorePointer" "on"
[   232.377] (**) <default pointer>: always reports core events
[   232.377] (WW) <default pointer>: No Device specified, looking for one...
[   232.441] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[   232.441] (--) <default pointer>: Device: "/dev/input/mice"
[   232.441] (==) <default pointer>: Protocol: "Auto"
[   232.441] (**) <default pointer>: always reports core events
[   232.442] (**) Option "Device" "/dev/input/mice"
[   232.500] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[   232.500] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[   232.500] (**) <default pointer>: Buttons: 9
[   232.500] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[   232.500] (**) <default pointer>: (accel) keeping acceleration scheme 1
[   232.500] (**) <default pointer>: (accel) acceleration profile 0
[   232.500] (**) <default pointer>: (accel) acceleration factor: 2.000
[   232.500] (**) <default pointer>: (accel) acceleration threshold: 4
[   232.500] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[   232.793] (II) <default pointer>: ps2EnableDataReporting: succeeded
[   232.793] (II) LoadModule: "kbd"
[   232.794] (WW) Warning, couldn't open module kbd
[   232.794] (II) UnloadModule: "kbd"
[   232.794] (II) Unloading kbd
[   232.794] (EE) Failed to load module "kbd" (module does not exist, 0)
[   232.794] (EE) No input driver matching `kbd'
[   232.796] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   232.796] (II) AutoAddDevices is off - not adding device.
[   232.796] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[   232.796] (II) AutoAddDevices is off - not adding device.
[   232.796] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   232.796] (II) AutoAddDevices is off - not adding device.
[   232.797] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   232.797] (II) AutoAddDevices is off - not adding device.
[   232.797] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   232.797] (II) AutoAddDevices is off - not adding device.
[   232.797] (II) config/udev: Adding drm device (/dev/dri/card0)
[   232.797] (II) xfree86: Adding drm device (/dev/dri/card0)
[   232.797] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[   232.798] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[   232.798] (II) AutoAddDevices is off - not adding device.
[   232.798] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[   232.798] (II) AutoAddDevices is off - not adding device.
[   232.798] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[   232.798] (II) AutoAddDevices is off - not adding device.
[   232.799] (II) config/udev: Adding input device Webcam SC-10HDD12636P (/dev/input/event13)
[   232.799] (II) AutoAddDevices is off - not adding device.
[   232.799] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[   232.799] (II) AutoAddDevices is off - not adding device.
[   232.799] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[   232.799] (II) AutoAddDevices is off - not adding device.
[   232.800] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[   232.800] (II) AutoAddDevices is off - not adding device.
[   232.800] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   232.800] (II) AutoAddDevices is off - not adding device.
[   232.800] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[   232.800] (II) AutoAddDevices is off - not adding device.
[   232.800] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[   232.801] (II) AutoAddDevices is off - not adding device.
[   232.801] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[   232.801] (II) AutoAddDevices is off - not adding device.
[   240.133] (II) UnloadModule: "mouse"
[   240.149] (II) NVIDIA(GPU-0): Deleting GPU-0
[   240.149] (EE) Server terminated successfully (0). Closing log file.

 

Онлайн qupl

  • Главный модератор
  • Ветеран
  • *****
  • Сообщений: 5012
  • memento mori
  • Jabber: qupl@jabber.ru

Оффлайн turgon

  • Пользователь
  • *
  • Topic Author
  • Сообщений: 19
turgon, тыц.

Сейчас добавил.
Пока не помех наблюдается, если и дальше не будет, вполне возможно что это и есть решение.
Через несколько дней отпишусь


Cообщение объединено 24 Март 2016, 14:40:11
Не помогло..
« Последнее редактирование: 24 Март 2016, 14:40:11 от turgon »
 

Теги:
 

Debian Jessie, ALC861, звук с шумом

Автор oatmealcookie

Ответов: 2
Просмотров: 1750
Последний ответ 18 Август 2013, 17:42:33
от oatmealcookie
Jessie XFCE Workrave - нет звука уведомлений

Автор Евгений

Ответов: 4
Просмотров: 2202
Последний ответ 09 Декабрь 2014, 13:26:47
от Евгений
Не могу установить Pulseaudio и equalaizer на Debian Jessie 64 bit.

Автор userman

Ответов: 9
Просмотров: 1790
Последний ответ 22 Январь 2016, 16:16:45
от userman
Звук на Linux Debian Jessie

Автор Павел

Ответов: 4
Просмотров: 1355
Последний ответ 07 Ноябрь 2016, 15:14:24
от ferum
странности видео jessie

Автор aqwest

Ответов: 1
Просмотров: 1497
Последний ответ 29 Июль 2014, 11:21:08
от Utility