нарушенные зависимости

doublemint · 21 апреля 2016, 21:10:06

Привет. Ситуация сложилась печальная, экспериментировал с драйвером для видео карты. итог- нарушил зависимости,
glx отвалился. по команде glxinfo пишет следующее:
Error: couldn't find RGB GLX visual or fbconfig

как вариант пробовал apt-get -f, не помогло.

помогите идеями, кто чем может.

alsoijw · 21 апреля 2016, 22:27:56

Код Выделить

apt-get install -fвставить сюда

doublemint · 22 апреля 2016, 14:27:52

alsoijw , apt-get -f ничего не выдаст, пакет glx стоит. но, aptitude говорит что нарушены зависимости, стоит буква В извещающая об этом. может мне просто переустановить все пакеты связанные драйвером.

ogost · 22 апреля 2016, 15:23:11

doublemint, я извиняюсь, вы правильно вводите команду?

doublemint · 22 апреля 2016, 17:33:37

ogost, apt-get install -f вывод этой команды показывает что все в порядке.

ferum · 22 апреля 2016, 18:25:08

Если хоть раз воспользоваться поиском по форуму или просто google невозможно не понять что все проблемы с зависимостями от беспорядка в sources.list и sources.list.d.

doublemint · 22 апреля 2016, 23:46:56

в общем проверил, все пакеты что надо стоят. еще где-то тут на форуме читал что нужно xorg.conf. создал и засунул в папку x11. перегрузил. но, ошибка осталась, все по прежнему...

alsoijw · 23 апреля 2016, 00:00:05

doublemint, 1) прекратить делать необдуманные действия
2) проблема с зависимостями решена? Если нет, то приведи /etc/apt/sources.list и ещё я писал

Цитата: alsoijw от 21 апреля 2016, 22:27:56
Код Выделить Развернуть
apt-get install -fвставить сюда

Почему не вставил вывод?

doublemint · 23 апреля 2016, 02:06:49

alsoijw, как я уже говорил вывод в порядке:
# apt-get install -f
Чтение списков пакетов... Готово
Построение дерева зависимостей
Чтение информации о состоянии... Готово
обновлено 0, установлено 0 новых пакетов, для удаления отмечено 0 пакетов, и 2 пакетов не обновлено.

alsoijw · 23 апреля 2016, 15:29:59

doublemint, так и будешь по частям приводить?

Цитата: alsoijw от 23 апреля 2016, 00:00:05приведи /etc/apt/sources.list

doublemint · 23 апреля 2016, 15:39:00

сори, как-то не смыкнул сразу)
/etc/apt/sources.list

Спойлер

#

# deb cdrom:[Debian GNU/Linux 8 _Jessie_ - Official Snapshot i386 LIVE/INSTALL Binary 20150606-15:52]/ jessie main

#deb cdrom:[Debian GNU/Linux 8 _Jessie_ - Official Snapshot i386 LIVE/INSTALL Binary 20150606-15:52]/ jessie main

deb http://ftp.ua.debian.org/debian/ jessie main non-free contrib
deb-src http://ftp.ua.debian.org/debian/ jessie main non-free contrib

deb http://security.debian.org/ jessie/updates main non-free contrib
deb-src http://security.debian.org/ jessie/updates main non-free contrib

# jessie-updates, previously known as 'volatile'
deb http://ftp.ua.debian.org/debian/ jessie-updates main non-free contrib
deb-src http://ftp.ua.debian.org/debian/ jessie-updates main non-free contrib

# stretch
#deb http://ftp.ua.debian.org/debian/ stretch main non-free contrib

#chrome
#deb https://dl.google.com/linux/chrome/deb/ stable main

#backports
deb http://ftp.debian.org/debian jessie-backports main contrib non-free

Cообщение объединено 23 апреля 2016, 17:43:04

я уже писал что экспериментировал с драйвером видео карты. пытался поставить nvidia_96 из whizee репозитория.
когда ничего не вышло из этого, я вернул nouveau. мне так кажется, тут и связь с отвалившимся glx.
aptitude говорит что glx стоит и добавил букву B, мул нарушены зависимости.
прям вот только что при написании этого сообщения меня посетила мысль, а может я не полностью удалил нвидиа драйвер...

ferum · 23 апреля 2016, 20:42:43

Классическая ситуация - дистрибутив Франкенштейна где намешан stable, backports и testing, исправить можно когда понимаешь, но когда не понимаешь проще снести чем разводить тему о пустом на неделю.

doublemint · 23 апреля 2016, 21:22:02

может ты и прав ferum. но пока не надоест буду ковырять...
кстати с testing, я игру wesnoth ставил. а вот backports, не помню. чем он отличается от тестинг?

alsoijw · 23 апреля 2016, 21:46:11

doublemint, бекпорты не ломают зависимости. Позволяют новые версии в старой или стабильной системе.

doublemint · 23 апреля 2016, 22:23:28

alsoijw, я тут проверил вывод aptitude, сломанные зависимости исчезли. но glxinfo все также отвечает:
~$glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig

предлагаю взглянуть на Xorg.0.log

Спойлер

[ 73.351]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 73.351] X Protocol Version 11, Revision 0
[ 73.351] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 73.351] Current Operating System: Linux malekula 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) i686
[ 73.351] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=29040eb0-4555-466a-94b2-ebb1b653f886 ro initrd=/install/gtk/initrd.gz quiet
[ 73.351] Build Date: 11 February 2015 01:14:26AM
[ 73.351] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 73.351] Current version of pixman: 0.32.6
[ 73.351]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[ 73.351] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 73.352] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 23 13:45:50 2016
[ 73.386] (==) Using config file: "/etc/X11/xorg.conf"
[ 73.386] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 74.025] (==) ServerLayout "X.org Configured"
[ 74.025] (**) |-->Screen "Screen0" (0)
[ 74.025] (**) | |-->Monitor "Monitor0"
[ 74.079] (**) | |-->Device "Card0"
[ 74.079] (**) |-->Input Device "Mouse0"
[ 74.079] (**) |-->Input Device "Keyboard0"
[ 74.079] (==) Automatically adding devices
[ 74.079] (==) Automatically enabling devices
[ 74.079] (==) Automatically adding GPU devices
[ 74.384] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 74.384]    Entry deleted from font path.
[ 74.563] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 74.563]    Entry deleted from font path.
[ 74.563] (**) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins,
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[ 74.563] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 74.563] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 74.563] (WW) Disabling Mouse0
[ 74.563] (WW) Disabling Keyboard0
[ 74.563] (II) Loader magic: 0xb77d3700
[ 74.563] (II) Module ABI versions:
[ 74.563]    X.Org ANSI C Emulation: 0.4
[ 74.564]    X.Org Video Driver: 18.0
[ 74.564]    X.Org XInput driver : 21.0
[ 74.564]    X.Org Server Extension : 8.0
[ 74.565] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 74.567] (--) PCI:*(0:1:0:0) 10de:0181:0000:0000 rev 164, Mem @ 0xd7000000/16777216, 0xd8000000/134217728, BIOS @ 0x?

?/131072
[ 74.591] (II) "glx" will be loaded by default.
[ 74.591] (II) LoadModule: "glx"
[ 74.690] (WW) Warning, couldn't open module glx
[ 74.691] (II) UnloadModule: "glx"
[ 74.691] (II) Unloading glx
[ 74.691] (EE) Failed to load module "glx" (module does not exist, 0)
[ 74.691] (II) LoadModule: "nouveau"
[ 74.692] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 74.769] (II) Module nouveau: vendor="X.Org Foundation"
[ 74.769]    compiled for 1.16.0, module version = 1.0.11
[ 74.769]    Module class: X.Org Video Driver
[ 74.769]    ABI class: X.Org Video Driver, version 18.0
[ 74.769] (II) NOUVEAU driver Date: Thu Aug 28 03:57:48 2014 +0200
[ 74.769] (II) NOUVEAU driver for NVIDIA chipset families :
[ 74.769]    RIVA TNT (NV04)
[ 74.769]    RIVA TNT2 (NV05)
[ 74.769]    GeForce 256 (NV10)
[ 74.769]    GeForce 2 (NV11, NV15)
[ 74.769]    GeForce 4MX (NV17, NV18)
[ 74.770]    GeForce 3 (NV20)
[ 74.770]    GeForce 4Ti (NV25, NV28)
[ 74.770]    GeForce FX (NV3x)
[ 74.770]    GeForce 6 (NV4x)
[ 74.770]    GeForce 7 (G7x)
[ 74.770]    GeForce 8 (G8x)
[ 74.770]    GeForce GTX 200 (NVA0)
[ 74.770]    GeForce GTX 400 (NVC0)
[ 74.770] (++) using VT number 7

[ 74.770] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 74.770] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 74.777] (II) [drm] nouveau interface version: 1.1.2
[ 74.777] (II) Loading sub module "dri2"
[ 74.777] (II) LoadModule: "dri2"
[ 74.777] (II) Module "dri2" already built-in
[ 74.778] (--) NOUVEAU(0): Chipset: "NVIDIA NV18"
[ 74.778] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 74.778] (==) NOUVEAU(0): RGB weight 888
[ 74.778] (==) NOUVEAU(0): Default visual is TrueColor
[ 74.778] (==) NOUVEAU(0): Using HW cursor
[ 74.778] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 74.778] (==) NOUVEAU(0): Page flipping enabled
[ 74.778] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 74.778] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 74.778] (II) NOUVEAU(0): Initializing outputs ...
[ 74.786] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 74.819] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 74.844] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 74.844] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 74.844] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 74.844] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 74.849] (II) NOUVEAU(0): EDID for output VGA-1
[ 74.882] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 74.882] (II) NOUVEAU(0): Manufacturer: GSM Model: 437a Serial#: 304816
[ 74.882] (II) NOUVEAU(0): Year: 2005 Week: 2
[ 74.882] (II) NOUVEAU(0): EDID Version: 1.3
[ 74.882] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 74.882] (II) NOUVEAU(0): Sync: Separate
[ 74.882] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 24
[ 74.882] (II) NOUVEAU(0): Gamma: 2.81
[ 74.882] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 74.882] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 74.882] (II) NOUVEAU(0): redX: 0.636 redY: 0.327 greenX: 0.278 greenY: 0.600
[ 74.882] (II) NOUVEAU(0): blueX: 0.145 blueY: 0.064 whiteX: 0.283 whiteY: 0.298
[ 74.882] (II) NOUVEAU(0): Supported established timings:
[ 74.882] (II) NOUVEAU(0): 720x400@70Hz
[ 74.882] (II) NOUVEAU(0): 720x400@88Hz
[ 74.882] (II) NOUVEAU(0): 640x480@60Hz
[ 74.882] (II) NOUVEAU(0): 640x480@67Hz
[ 74.882] (II) NOUVEAU(0): 640x480@72Hz
[ 74.882] (II) NOUVEAU(0): 640x480@75Hz
[ 74.882] (II) NOUVEAU(0): 800x600@56Hz
[ 74.882] (II) NOUVEAU(0): 800x600@60Hz
[ 74.882] (II) NOUVEAU(0): 800x600@72Hz
[ 74.882] (II) NOUVEAU(0): 800x600@75Hz
[ 74.882] (II) NOUVEAU(0): 832x624@75Hz
[ 74.882] (II) NOUVEAU(0): 1024x768@87Hz (interlaced)
[ 74.882] (II) NOUVEAU(0): 1024x768@60Hz
[ 74.882] (II) NOUVEAU(0): 1024x768@70Hz
[ 74.882] (II) NOUVEAU(0): 1024x768@75Hz
[ 74.883] (II) NOUVEAU(0): 1280x1024@75Hz
[ 74.883] (II) NOUVEAU(0): 1152x864@75Hz
[ 74.883] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 74.883] (II) NOUVEAU(0): Supported standard timings:
[ 74.883] (II) NOUVEAU(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 74.883] (II) NOUVEAU(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 74.883] (II) NOUVEAU(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 74.883] (II) NOUVEAU(0): #3: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 74.883] (II) NOUVEAU(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 74.883] (II) NOUVEAU(0): #5: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 74.883] (II) NOUVEAU(0): #6: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 74.883] (II) NOUVEAU(0): #7: hsize: 1600 vsize 1200 refresh: 65 vid: 17833
[ 74.883] (II) NOUVEAU(0): Supported detailed timing:
[ 74.883] (II) NOUVEAU(0): clock: 135.0 MHz Image Size: 310 x 230 mm
[ 74.883] (II) NOUVEAU(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 74.883] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 74.883] (II) NOUVEAU(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 85 kHz, PixClock max 185 MHz
[ 74.883] (II) NOUVEAU(0): Monitor name: T710PU
[ 74.883] (II) NOUVEAU(0): Monitor name:
[ 74.883] (II) NOUVEAU(0): EDID (in hex):
[ 74.883] (II) NOUVEAU(0):    00ffffffffffff001e6d7a43b0a60400
[ 74.883] (II) NOUVEAU(0):    020f0103682118b5eaf629a253479925
[ 74.883] (II) NOUVEAU(0):    10484cffff80314f3159714f4559614f
[ 74.883] (II) NOUVEAU(0):    6159818fa945c034009851002a401090
[ 74.883] (II) NOUVEAU(0):    130036e61000001e000000fd0032a01e
[ 74.883] (II) NOUVEAU(0):    5512000a202020202020000000fc0054
[ 74.883] (II) NOUVEAU(0):    37313050550a202020202020000000fc
[ 74.883] (II) NOUVEAU(0):    000a20202020202020202020202000c5
[ 74.883] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 74.883] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.04 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)
[ 74.883] (II) NOUVEAU(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz e)
[ 74.883] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 74.883] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 74.883] (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz e)
[ 74.884] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 74.912] (II) NOUVEAU(0): EDID for output TV-1
[ 74.912] (II) NOUVEAU(0): Printing probed modes for output TV-1
[ 74.912] (II) NOUVEAU(0): Modeline "720x576"x50.0 28.66 720 776 856 960 576 576 588 597 -hsync -vsync (29.9 kHz eP)
[ 74.912] (II) NOUVEAU(0): Modeline "1024x768"x50.0 54.16 1024 1064 1200 1344 768 768 777 806 -hsync -vsync (40.3 kHz e)
[ 74.912] (II) NOUVEAU(0): Modeline "800x600"x50.0 32.14 800 840 920 1040 600 600 604 618 +hsync +vsync (30.9 kHz e)
[ 74.912] (II) NOUVEAU(0): Modeline "720x480"x50.0 25.20 720 752 872 960 480 480 493 525 -hsync -vsync (26.2 kHz e)
[ 74.912] (II) NOUVEAU(0): Modeline "640x480"x50.0 23.10 640 672 768 880 480 480 492 525 -hsync -vsync (26.2 kHz e)
[ 74.912] (II) NOUVEAU(0): Modeline "400x300"x100.0 20.10 400 432 496 640 300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
[ 74.912] (II) NOUVEAU(0): Modeline "320x240"x100.0 14.73 320 344 392 560 240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
[ 74.912] (II) NOUVEAU(0): Modeline "320x200"x100.0 12.32 320 344 392 560 200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
[ 74.912] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 74.912] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 74.912] (II) NOUVEAU(0): Output TV-1 connected
[ 74.912] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 74.912] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1024x768
[ 74.912] (II) NOUVEAU(0): Output TV-1 using initial mode 1024x768
[ 74.912] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 74.913] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 74.913] (**) NOUVEAU(0): Driver mode "1024x768": 54.2 MHz (scaled from 0.0 MHz), 40.3 kHz, 50.0 Hz
[ 74.913] (II) NOUVEAU(0): Modeline "1024x768"x50.0 54.16 1024 1064 1200 1344 768 768 777 806 -hsync -vsync (40.3 kHz e)
[ 74.913] (**) NOUVEAU(0): Driver mode "800x600": 32.1 MHz (scaled from 0.0 MHz), 30.9 kHz, 50.0 Hz
[ 74.913] (II) NOUVEAU(0): Modeline "800x600"x50.0 32.14 800 840 920 1040 600 600 604 618 +hsync +vsync (30.9 kHz e)
[ 74.913] (**) NOUVEAU(0): Driver mode "720x480": 25.2 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
[ 74.913] (II) NOUVEAU(0): Modeline "720x480"x50.0 25.20 720 752 872 960 480 480 493 525 -hsync -vsync (26.2 kHz e)
[ 74.913] (**) NOUVEAU(0): Driver mode "640x480": 23.1 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
[ 74.913] (II) NOUVEAU(0): Modeline "640x480"x50.0 23.10 640 672 768 880 480 480 492 525 -hsync -vsync (26.2 kHz e)
[ 74.913] (**) NOUVEAU(0): Driver mode "400x300": 20.1 MHz (scaled from 0.0 MHz), 31.4 kHz, 100.0 Hz (D)
[ 74.913] (II) NOUVEAU(0): Modeline "400x300"x100.0 20.10 400 432 496 640 300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
[ 74.913] (**) NOUVEAU(0): Driver mode "320x240": 14.7 MHz (scaled from 0.0 MHz), 26.3 kHz, 100.0 Hz (D)
[ 74.913] (II) NOUVEAU(0): Modeline "320x240"x100.0 14.73 320 344 392 560 240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
[ 74.913] (**) NOUVEAU(0): Driver mode "320x200": 12.3 MHz (scaled from 0.0 MHz), 22.0 kHz, 100.0 Hz (D)
[ 74.913] (II) NOUVEAU(0): Modeline "320x200"x100.0 12.32 320 344 392 560 200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
[ 74.913] (**) NOUVEAU(0): Driver mode "720x576": 28.7 MHz (scaled from 0.0 MHz), 29.9 kHz, 50.0 Hz
[ 74.913] (II) NOUVEAU(0): Modeline "720x576"x50.0 28.66 720 776 856 960 576 576 588 597 -hsync -vsync (29.9 kHz eP)
[ 74.913] (==) NOUVEAU(0): DPI set to (96, 96)
[ 74.913] (II) Loading sub module "fb"
[ 74.913] (II) LoadModule: "fb"
[ 74.914] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 75.135] (II) Module fb: vendor="X.Org Foundation"
[ 75.135]    compiled for 1.16.4, module version = 1.0.0
[ 75.135]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 75.136] (II) Loading sub module "shadowfb"
[ 75.136] (II) LoadModule: "shadowfb"
[ 75.136] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 75.166] (II) Module shadowfb: vendor="X.Org Foundation"
[ 75.166]    compiled for 1.16.4, module version = 1.0.0
[ 75.166]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 75.166] (--) Depth 24 pixmap format is 32 bpp
[ 75.168] (II) NOUVEAU(0): Channel setup complete.
[ 75.332] (II) NOUVEAU(0): [DRI2] Setup complete
[ 75.332] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau_vieux
[ 75.332] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau_vieux
[ 75.485] (II) Loading sub module "exa"
[ 75.485] (II) LoadModule: "exa"
[ 75.485] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 75.581] (II) Module exa: vendor="X.Org Foundation"
[ 75.581]    compiled for 1.16.4, module version = 2.6.0
[ 75.581]    ABI class: X.Org Video Driver, version 18.0
[ 75.581] (II) EXA(0): Driver allocated offscreen pixmaps
[ 75.581] (II) EXA(0): Driver registered support for the following operations:
[ 75.581] (II) Solid
[ 75.581] (II) Copy
[ 75.581] (II) Composite (RENDER acceleration)
[ 75.581] (II) UploadToScreen
[ 75.581] (II) DownloadFromScreen
[ 75.581] (==) NOUVEAU(0): Backing store enabled
[ 75.581] (==) NOUVEAU(0): Silken mouse enabled
[ 75.636] (==) NOUVEAU(0): DPMS enabled
[ 75.636] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 75.690] (--) RandR disabled
[ 75.753] (II) SELinux: Disabled on system
[ 75.773] (II) NOUVEAU(0): NVEnterVT is called.
[ 75.970] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 75.970] resize called 1024 768
[ 77.471] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 77.482] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 77.483] (II) LoadModule: "evdev"
[ 77.483] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 77.528] (II) Module evdev: vendor="X.Org Foundation"
[ 77.528]    compiled for 1.16.0, module version = 2.9.0
[ 77.528]    Module class: X.Org XInput Driver
[ 77.528]    ABI class: X.Org XInput driver, version 21.0
[ 77.528] (II) Using input driver 'evdev' for 'Power Button'
[ 77.528] (**) Power Button: always reports core events
[ 77.528] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 77.528] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 77.529] (--) evdev: Power Button: Found keys
[ 77.529] (II) evdev: Power Button: Configuring as keyboard
[ 77.529] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 77.529] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 77.529] (**) Option "xkb_rules" "evdev"
[ 77.529] (**) Option "xkb_model" "pc105"
[ 77.529] (**) Option "xkb_layout" "us,ru"
[ 77.529] (**) Option "xkb_variant" ","
[ 77.529] (**) Option "xkb_options" "grp:lctrl_lshift_toggle,grp_led:scroll"
[ 77.723] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 77.723] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 77.723] (II) Using input driver 'evdev' for 'Power Button'
[ 77.723] (**) Power Button: always reports core events
[ 77.723] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 77.723] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 77.723] (--) evdev: Power Button: Found keys
[ 77.723] (II) evdev: Power Button: Configuring as keyboard
[ 77.723] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 77.723] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 77.723] (**) Option "xkb_rules" "evdev"
[ 77.723] (**) Option "xkb_model" "pc105"
[ 77.723] (**) Option "xkb_layout" "us,ru"
[ 77.723] (**) Option "xkb_variant" ","
[ 77.732] (**) Option "xkb_options" "grp:lctrl_lshift_toggle,grp_led:scroll"
[ 77.735] (II) config/udev: Adding input device Genius 4D Scroll Mouse (/dev/input/event1)
[ 77.735] (**) Genius 4D Scroll Mouse: Applying InputClass "evdev pointer catchall"
[ 77.735] (II) Using input driver 'evdev' for 'Genius 4D Scroll Mouse'
[ 77.735] (**) Genius 4D Scroll Mouse: always reports core events
[ 77.735] (**) evdev: Genius 4D Scroll Mouse: Device: "/dev/input/event1"
[ 77.735] (--) evdev: Genius 4D Scroll Mouse: Vendor 0x458 Product 0x56
[ 77.735] (--) evdev: Genius 4D Scroll Mouse: Found 3 mouse buttons
[ 77.735] (--) evdev: Genius 4D Scroll Mouse: Found scroll wheel(s)
[ 77.735] (--) evdev: Genius 4D Scroll Mouse: Found relative axes
[ 77.735] (--) evdev: Genius 4D Scroll Mouse: Found x and y relative axes
[ 77.735] (II) evdev: Genius 4D Scroll Mouse: Configuring as mouse
[ 77.735] (II) evdev: Genius 4D Scroll Mouse: Adding scrollwheel support
[ 77.735] (**) evdev: Genius 4D Scroll Mouse: YAxisMapping: buttons 4 and 5
[ 77.735] (**) evdev: Genius 4D Scroll Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 77.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:0458:0056.0001/input/input1/event1"
[ 77.744] (II) XINPUT: Adding extended input device "Genius 4D Scroll Mouse" (type: MOUSE, id

[ 77.744] (II) evdev: Genius 4D Scroll Mouse: initialized for relative axes.
[ 77.745] (**) Genius 4D Scroll Mouse: (accel) keeping acceleration scheme 1
[ 77.745] (**) Genius 4D Scroll Mouse: (accel) acceleration profile 0
[ 77.745] (**) Genius 4D Scroll Mouse: (accel) acceleration factor: 2.000
[ 77.745] (**) Genius 4D Scroll Mouse: (accel) acceleration threshold: 4
[ 77.746] (II) config/udev: Adding input device Genius 4D Scroll Mouse (/dev/input/mouse0)
[ 77.746] (II) No input driver specified, ignoring this device.
[ 77.746] (II) This device may have been added with another device file.
[ 77.747] (II) config/udev: Adding input device Venus USB2.0 Camera (/dev/input/event5)
[ 77.747] (**) Venus USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 77.756] (II) Using input driver 'evdev' for 'Venus USB2.0 Camera'
[ 77.756] (**) Venus USB2.0 Camera: always reports core events
[ 77.756] (**) evdev: Venus USB2.0 Camera: Device: "/dev/input/event5"
[ 77.756] (--) evdev: Venus USB2.0 Camera: Vendor 0xac8 Product 0x3420
[ 77.756] (--) evdev: Venus USB2.0 Camera: Found keys
[ 77.756] (II) evdev: Venus USB2.0 Camera: Configuring as keyboard
[ 77.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.3/usb1/1-4/1-4:1.0/input/input5/event5"
[ 77.756] (II) XINPUT: Adding extended input device "Venus USB2.0 Camera" (type: KEYBOARD, id 9)
[ 77.756] (**) Option "xkb_rules" "evdev"
[ 77.756] (**) Option "xkb_model" "pc105"
[ 77.756] (**) Option "xkb_layout" "us,ru"
[ 77.756] (**) Option "xkb_variant" ","
[ 77.756] (**) Option "xkb_options" "grp:lctrl_lshift_toggle,grp_led:scroll"
[ 77.758] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 77.759] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 77.759] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 77.759] (**) AT Translated Set 2 keyboard: always reports core events
[ 77.759] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 77.759] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 77.759] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 77.759] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 77.759] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 77.759] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 77.759] (**) Option "xkb_rules" "evdev"
[ 77.759] (**) Option "xkb_model" "pc105"
[ 77.759] (**) Option "xkb_layout" "us,ru"
[ 77.759] (**) Option "xkb_variant" ","
[ 77.759] (**) Option "xkb_options" "grp:lctrl_lshift_toggle,grp_led:scroll"
[ 77.769] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 77.769] (II) No input driver specified, ignoring this device.
[ 77.769] (II) This device may have been added with another device file.

но там информации не много по этому поводу, просто написано что модуль не загружает. учитывая что пакет нужный стоит, могу предположить что он стоит в не стандартной папке. может сделать ссылку, или же переменную окружения. честно говоря точно не помню, помню что такое где-то практикуют. по моему при сборке пакета.
надо бы загуглить...

Cообщение объединено 24 апреля 2016, 16:03:40

alsoijw, я скачал деб файл посмотреть что и куда он ставит, ссылку и сам модуль он помещает в /usr/lib/i386-linux-gnu.
у меня же, оказалось там три:
# find / -name libGL.so\*
/usr/lib/i386-linux-gnu/libGL.so.1.2.0
/usr/lib/i386-linux-gnu/libGL.so.1
/usr/lib/i386-linux-gnu/libGL.so
две из них ссылки на сам модуль:
# ls -l /usr/lib/i386-linux-gnu/libGL.so.1
lrwxrwxrwx 1 root root 14 Авг 19 2015 /usr/lib/i386-linux-gnu/libGL.so.1 -> libGL.so.1.2.0
# ls -l /usr/lib/i386-linux-gnu/libGL.so
lrwxrwxrwx 1 root root 14 Авг 19 2015 /usr/lib/i386-linux-gnu/libGL.so -> libGL.so.1.2.0
может мне зделать подобную ссылку из папки /usr/lib/xorg/modules?

нет, не заработало...

если кому понадобится, решение здесь https://nouveau.freedesktop.org/wiki/TroubleShooting/