Настройка модема Билайн ZTE MF626 для работы с SMSTOOLS

[lamokk]

Здравствуйте.

Помогите настроить модем(свисток) Билайн ZTE MF626 для работы с SMSTOOLS (3.1.14).

Подключил свисток, программой minicom отключил сд-ром. Модем определяется.

Настройка smstools (smsd.conf):

Код Выделить Развернуть

devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
incoming = /var/spool/sms/incoming
logfile = /var/log/smstools/smsd.log
infofile = /var/run/smstools/smsd.working
pidfile = /var/run/smstools/smsd.pid
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
stats = /var/log/smstools/smsd_stats
loglevel = 7
receive_before_send = no
autosplit = 3

[GSM1]
device = /dev/ttyUSB1
incoming = yes
pre_init = no
init = ATE0


лог smstools (smsd.log):

Код Выделить Развернуть

2016-07-13 10:49:36,7, GSM1: -> AT+CSQ
2016-07-13 10:49:36,7, GSM1: Command is sent, waiting for the answer
2016-07-13 10:49:36,7, GSM1: <- +CSQ: 99,99 OK
2016-07-13 10:49:36,5, GSM1: Signal Strength Indicator: not present of not measurable, Bit Error Rate: not known or not detectable
2016-07-13 10:49:37,7, GSM1: -> AT+CREG?
2016-07-13 10:49:37,7, GSM1: Command is sent, waiting for the answer
2016-07-13 10:49:37,7, GSM1: <- +CREG: 0,2 OK
2016-07-13 10:49:37,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 34. TIME

Подскажите куда копать и как исправить?

Спасибо.