Слетают икси на AMD

[phantom85]

Всем привет, прошу помощи в установке видео драйверов на леново 505
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8330]

Поставил KDE уже устал переустанавливать. После установки aptitude install firmware-linux-nonfree и перезагрузки система не загружается даже в консоль не могу попасть, просто висит и нет реакции. Как мне все таки поставить дрова на эту машину? За ранее благодарен.

[qupl]

ЛОГИ.

[phantom85]

qupl,  Как?

[qupl]

LiveCD

[phantom85]

у меня сейчас чистая КДЕ стоит зачем мне лайв сиди?

[alsoijw]

phantom85, определить проблему. Иначе тему можно удалять.

[phantom85]

alsoijw, ну тогда если можно пошагово что нужно делать и какие команды вводить?

[Aalexeey]

phantom85, вам предлагают загрузится из LiveCD чтобы посмотреть логи той системы которая у вас установленна и не грузится.

[phantom85]

Aalexeey,  да это я уже понял, сейчас то загрузился, так как новая установка была, я качаю лайв сиди, дальше то мне как? как логи посмотреть? что бы скинуть
Cообщение объединено 25 Ноябрь 2016, 22:51:37
какие именно логи нужны ?
Cообщение объединено 26 ноября 2016, 14:38:57
qupl, qupl, скачал LiveCD, приготовил флешку сижу жду.

[ogost]

Логи лежат в /var/log/, посмотрите там messages, syslog, dmesg, и если есть xorg.log (последнее точно не помню, кажется еще и в домашней директории лежит)

[phantom85]

ogost, это только с лайв сиди можно или с запущеной на HD

[ogost]

Пути относительно установленного на жесткий дистрибутива. Грузилась с "живой" системы, монтируете жесткий в /mnt например, Тогда путь будет /mnt/var/log

[phantom85]

не могу вставить логи Сообщение превышает максимально допустимую длину (60000 знаков).

[ferum]

Сохранить в виде текстового файла и на любой файлообменник со ссылкой.

[phantom85]

логи
http://dropmefiles.com/1EuC3
Cообщение объединено 26 ноября 2016, 20:11:25
dmesg

Код Выделить Развернуть

[    0.303512] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.540301] ACPI: Interpreter enabled
[    1.540320] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    1.540330] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    1.540360] ACPI: (supports S0 S3 S4 S5)
[    1.540364] ACPI: Using IOAPIC for interrupt routing
[    1.540742] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.541603] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.542676] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.581302] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.581318] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.581792] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    1.582186] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[    1.582197] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    1.582510] PCI host bridge to bus 0000:00
[    1.582517] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.582522] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.582527] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.582531] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.582536] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    1.582540] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    1.582544] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    1.582548] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.582551] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.582555] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.582559] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.582563] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.582567] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.582571] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    1.582575] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    1.582579] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[    1.582583] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[    1.582587] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[    1.582608] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[    1.582784] pci 0000:00:01.0: [1002:9832] type 00 class 0x030000
[    1.582805] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.582820] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    1.582830] pci 0000:00:01.0: reg 0x20: [io  0x4000-0x40ff]
[    1.582840] pci 0000:00:01.0: reg 0x24: [mem 0xf0b00000-0xf0b3ffff]
[    1.582850] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.582899] pci 0000:00:01.0: supports D1 D2
[    1.582903] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    1.583063] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    1.583083] pci 0000:00:01.1: reg 0x10: [mem 0xf0b40000-0xf0b43fff 64bit]
[    1.583159] pci 0000:00:01.1: supports D1 D2
[    1.583292] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[    1.583453] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[    1.583541] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    1.583701] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[    1.583789] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    1.583867] pci 0000:00:02.3: System wakeup disabled by ACPI
[    1.583959] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[    1.584046] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    1.584230] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    1.584255] pci 0000:00:10.0: reg 0x10: [mem 0xf0b48000-0xf0b49fff 64bit]
[    1.584360] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    1.584438] pci 0000:00:10.0: System wakeup disabled by ACPI
[    1.584540] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    1.584565] pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
[    1.584576] pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
[    1.584587] pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
[    1.584598] pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
[    1.584608] pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
[    1.584619] pci 0000:00:11.0: reg 0x24: [mem 0xf0b4e000-0xf0b4e3ff]
[    1.584679] pci 0000:00:11.0: PME# supported from D3hot
[    1.584828] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    1.584844] pci 0000:00:12.0: reg 0x10: [mem 0xf0b4d000-0xf0b4dfff]
[    1.584959] pci 0000:00:12.0: System wakeup disabled by ACPI
[    1.585050] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    1.585071] pci 0000:00:12.2: reg 0x10: [mem 0xf0b4c000-0xf0b4c0ff]
[    1.585150] pci 0000:00:12.2: supports D1 D2
[    1.585153] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    1.585226] pci 0000:00:12.2: System wakeup disabled by ACPI
[    1.585318] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    1.585334] pci 0000:00:13.0: reg 0x10: [mem 0xf0b4b000-0xf0b4bfff]
[    1.585450] pci 0000:00:13.0: System wakeup disabled by ACPI
[    1.585541] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    1.585562] pci 0000:00:13.2: reg 0x10: [mem 0xf0b4a000-0xf0b4a0ff]
[    1.585640] pci 0000:00:13.2: supports D1 D2
[    1.585644] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    1.585717] pci 0000:00:13.2: System wakeup disabled by ACPI
[    1.585809] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    1.586000] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    1.586026] pci 0000:00:14.2: reg 0x10: [mem 0xf0b44000-0xf0b47fff 64bit]
[    1.586098] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    1.586245] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    1.586445] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[    1.586589] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[    1.586733] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[    1.586873] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[    1.587020] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[    1.587156] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[    1.587450] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
[    1.587477] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.587493] pci 0000:01:00.0: reg 0x18: [mem 0xf0a00000-0xf0a3ffff 64bit]
[    1.587504] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    1.587522] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.587602] pci 0000:01:00.0: supports D1 D2
[    1.587606] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    1.598679] pci 0000:00:02.1: PCI bridge to [bus 01]
[    1.598689] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    1.598696] pci 0000:00:02.1:   bridge window [mem 0xf0a00000-0xf0afffff]
[    1.598705] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.598851] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
[    1.598895] pci 0000:02:00.0: reg 0x10: [mem 0xf0900000-0xf093ffff 64bit]
[    1.598911] pci 0000:02:00.0: reg 0x18: [io  0x2000-0x207f]
[    1.599047] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.610673] pci 0000:00:02.3: PCI bridge to [bus 02]
[    1.610683] pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
[    1.610690] pci 0000:00:02.3:   bridge window [mem 0xf0900000-0xf09fffff]
[    1.610852] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[    1.610903] pci 0000:03:00.0: reg 0x10: [mem 0xf0800000-0xf087ffff 64bit]
[    1.610977] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    1.611093] pci 0000:03:00.0: supports D1 D2
[    1.611097] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.622718] pci 0000:00:02.4: PCI bridge to [bus 03]
[    1.622736] pci 0000:00:02.4:   bridge window [mem 0xf0800000-0xf08fffff]
[    1.652428] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.652580] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.652729] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.652875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.653002] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.653098] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.653194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.653289] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.653647] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.653745] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    1.654063] vgaarb: setting as boot device: PCI:0000:00:01.0
[    1.654068] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    1.654080] vgaarb: loaded
[    1.654083] vgaarb: bridge control possible 0000:00:01.0
[    1.654328] PCI: Using ACPI for IRQ routing
[    1.656143] PCI: pci_cache_line_size set to 64 bytes
[    1.656255] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
[    1.656259] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    1.656262] e820: reserve RAM buffer [mem 0xa9363000-0xabffffff]
[    1.656265] e820: reserve RAM buffer [mem 0xa9bbc000-0xabffffff]
[    1.656269] e820: reserve RAM buffer [mem 0xaf5bf000-0xafffffff]
[    1.656272] e820: reserve RAM buffer [mem 0xafc00000-0xafffffff]
[    1.656275] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
[    1.656558] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.656566] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    1.658655] Switched to clocksource hpet
[    1.669186] pnp: PnP ACPI init
[    1.669218] ACPI: bus type PNP registered
[    1.669528] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    1.669535] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.669541] system 00:00: [mem 0xff000000-0xff000fff] has been reserved
[    1.669548] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.683211] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.683313] pnp 00:02: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active)
[    1.683495] pnp 00:03: Plug and Play ACPI device, IDs SYN2b1f SYN0700 SYN0002 PNP0f13 (active)
[    1.683750] system 00:04: [io  0x0400-0x04cf] could not be reserved
[    1.683757] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.683762] system 00:04: [io  0x04d6] has been reserved
[    1.683767] system 00:04: [io  0x0680-0x06ff] has been reserved
[    1.683772] system 00:04: [io  0x077a] has been reserved
[    1.683780] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    1.683785] system 00:04: [io  0x0c14] has been reserved
[    1.683789] system 00:04: [io  0x0c50-0x0c52] has been reserved
[    1.683794] system 00:04: [io  0x0c6c] has been reserved
[    1.683798] system 00:04: [io  0x0c6f] has been reserved
[    1.683802] system 00:04: [io  0x0cd0-0x0cdb] has been reserved
[    1.683807] system 00:04: [io  0x0840-0x0847] has been reserved
[    1.683813] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.683984] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.683989] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
[    1.683995] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.723533] pnp: PnP ACPI: found 6 devices
[    1.723542] ACPI: bus type PNP unregistered
[    1.733075] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with reserved [mem 0xffc00000-0xffffffff]
[    1.733083] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    1.733089] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.733147] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0b60000-0xf0b7ffff pref]
[    1.733155] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0a40000-0xf0a5ffff pref]
[    1.733160] pci 0000:00:02.1: PCI bridge to [bus 01]
[    1.733166] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    1.733173] pci 0000:00:02.1:   bridge window [mem 0xf0a00000-0xf0afffff]
[    1.733180] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.733187] pci 0000:00:02.3: PCI bridge to [bus 02]
[    1.733192] pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
[    1.733199] pci 0000:00:02.3:   bridge window [mem 0xf0900000-0xf09fffff]
[    1.733211] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0880000-0xf088ffff pref]
[    1.733215] pci 0000:00:02.4: PCI bridge to [bus 03]
[    1.733221] pci 0000:00:02.4:   bridge window [mem 0xf0800000-0xf08fffff]
[    1.733233] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.733237] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.733241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.733245] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    1.733248] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    1.733252] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    1.733256] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    1.733260] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    1.733264] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    1.733267] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    1.733271] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    1.733275] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    1.733278] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    1.733282] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    1.733286] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
[    1.733290] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[    1.733293] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[    1.733297] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.733301] pci_bus 0000:01: resource 1 [mem 0xf0a00000-0xf0afffff]
[    1.733305] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.733309] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.733313] pci_bus 0000:02: resource 1 [mem 0xf0900000-0xf09fffff]
[    1.733317] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
[    1.733458] NET: Registered protocol family 2
[    1.733983] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.734162] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.734318] TCP: Hash tables configured (established 32768 bind 32768)
[    1.734373] TCP: reno registered
[    1.734389] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.734426] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.734590] NET: Registered protocol family 1
[    1.734627] pci 0000:00:01.0: Video device with shadowed ROM
[    1.879272] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[    1.879297] PCI: CLS 64 bytes, default 64
[    1.879427] Unpacking initramfs...
[    2.421702] Freeing initrd memory: 14668K (ffff88003634a000 - ffff88003719d000)
[    2.421790] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.421797] software IO TLB [mem 0xa3fc0000-0xa7fc0000] (64MB) mapped at [ffff8800a3fc0000-ffff8800a7fbffff]
[    2.421882] Simple Boot Flag at 0x44 set to 0x1
[    2.422210] perf: AMD NB counters detected
[    2.422216] perf: AMD L2I counters detected
[    2.422331] microcode: CPU0: patch_level=0x0700010b
[    2.422345] microcode: CPU1: patch_level=0x0700010b
[    2.422360] microcode: CPU2: patch_level=0x0700010b
[    2.422374] microcode: CPU3: patch_level=0x0700010b
[    2.422499] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.422509] LVT offset 0 assigned for vector 0x400
[    2.422532] perf: AMD IBS detected (0x000000ff)
[    2.422683] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x420000 bytes, mapped to 0xffffc90004780000
[    2.422689] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1366x768x32, linelength=5632
[    2.429713] Console: switching to colour frame buffer device 170x48
[    2.436480] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    2.437041] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    2.437113] audit: initializing netlink subsys (disabled)
[    2.437152] audit: type=2000 audit(1480177514.120:1): initialized
[    2.438058] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.438105] zbud: loaded
[    2.438487] VFS: Disk quotas dquot_6.5.2
[    2.438522] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.438640] msgmni has been set to 6674
[    2.439292] alg: No test for stdrng (krng)
[    2.439349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.439446] io scheduler noop registered
[    2.439452] io scheduler deadline registered
[    2.439534] io scheduler cfq registered (default)
[    2.439903] pcieport 0000:00:02.1: irq 72 for MSI/MSI-X
[    2.440159] pcieport 0000:00:02.3: irq 73 for MSI/MSI-X
[    2.440373] pcieport 0000:00:02.4: irq 74 for MSI/MSI-X
[    2.440548] pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
[    2.440553] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    2.440560] pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
[    2.440592] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[    2.440597] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    2.440603] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
[    2.440634] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
[    2.440638] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    2.440644] pcie_pme 0000:00:02.4:pcie01: service driver pcie_pme loaded
[    2.440685] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.440785] pciehp 0000:00:02.1:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[    2.440838] pciehp 0000:00:02.1:pcie04: service driver pciehp loaded
[    2.440850] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.440953] GHES: HEST is not enabled!
[    2.441094] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.442003] Linux agpgart interface v0.103
[    2.442228] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSB] at 0x60,0x64 irq 1,12
[    2.452153] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.452165] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.452467] mousedev: PS/2 mouse device common for all mice
[    2.452558] rtc_cmos 00:01: RTC can wake from S4
[    2.452730] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.452761] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    2.452791] ledtrig-cpu: registered to indicate activity on CPUs
[    2.453681] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.453684] AMD IOMMUv2 functionality not available on this system
[    2.453866] TCP: cubic registered
[    2.453998] NET: Registered protocol family 10
[    2.454435] mip6: Mobile IPv6
[    2.454442] NET: Registered protocol family 17
[    2.454456] mpls_gso: MPLS GSO support
[    2.455159] registered taskstats version 1
[    2.456132] rtc_cmos 00:01: setting system clock to 2016-11-26 16:25:15 UTC (1480177515)
[    2.456322] PM: Hibernation image not present or could not be loaded.
[    2.458413] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    2.458418] Write protecting the kernel read-only data: 8192k
[    2.459190] Freeing unused kernel memory: 896K (ffff880001520000 - ffff880001600000)
[    2.460334] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    2.465384] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.477287] systemd-udevd[73]: starting version 215
[    2.477900] random: systemd-udevd urandom read with 5 bits of entropy available
[    2.507364] ACPI: bus type USB registered
[    2.507442] usbcore: registered new interface driver usbfs
[    2.507471] usbcore: registered new interface driver hub
[    2.508143] usbcore: registered new device driver usb
[    2.509196] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.509621] ehci-pci: EHCI PCI platform driver
[    2.509891] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.509906] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.509916] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.509930] ehci-pci 0000:00:12.2: debug port 1
[    2.509998] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0b4c000
[    2.511235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.511494] SCSI subsystem initialized
[    2.516196] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:89:84:db:63:d4]
[    2.517557] libata version 3.00 loaded.
[    2.518806] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.518954] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.518960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.518964] usb usb1: Product: EHCI Host Controller
[    2.518968] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.518972] usb usb1: SerialNumber: 0000:00:12.2
[    2.519371] hub 1-0:1.0: USB hub found
[    2.519400] hub 1-0:1.0: 4 ports detected
[    2.519953] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.519967] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.519975] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.519989] ehci-pci 0000:00:13.2: debug port 1
[    2.520035] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0b4a000
[    2.530753] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.530914] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.530920] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.530924] usb usb2: Product: EHCI Host Controller
[    2.530928] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.530932] usb usb2: SerialNumber: 0000:00:13.2
[    2.531224] hub 2-0:1.0: USB hub found
[    2.531244] hub 2-0:1.0: 4 ports detected
[    2.531803] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.531819] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    2.532084] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[    2.532095] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[    2.532105] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[    2.532114] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
[    2.532124] xhci_hcd 0000:00:10.0: irq 79 for MSI/MSI-X
[    2.532172] ohci-pci: OHCI PCI platform driver
[    2.532500] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.532505] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.532510] usb usb3: Product: xHCI Host Controller
[    2.532514] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    2.532518] usb usb3: SerialNumber: 0000:00:10.0
[    2.532782] hub 3-0:1.0: USB hub found
[    2.532804] hub 3-0:1.0: 2 ports detected
[    2.533027] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.533035] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[    2.535431] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.535494] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.535498] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.535502] usb usb4: Product: xHCI Host Controller
[    2.535506] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    2.535509] usb usb4: SerialNumber: 0000:00:10.0
[    2.535775] hub 4-0:1.0: USB hub found
[    2.535792] hub 4-0:1.0: 2 ports detected
[    2.536034] ahci 0000:00:11.0: version 3.0
[    2.536402] ahci 0000:00:11.0: irq 80 for MSI/MSI-X
[    2.536471] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.536478] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[    2.538575] scsi0 : ahci
[    2.538926] scsi1 : ahci
[    2.539042] ata1: SATA max UDMA/133 abar m1024@0xf0b4e000 port 0xf0b4e100 irq 80
[    2.539047] ata2: SATA max UDMA/133 abar m1024@0xf0b4e000 port 0xf0b4e180 irq 80
[    2.539229] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.539244] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[    2.539299] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0b4d000
[    2.598986] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.598994] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.598999] usb usb5: Product: OHCI PCI host controller
[    2.599003] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.599007] usb usb5: SerialNumber: 0000:00:12.0
[    2.599385] hub 5-0:1.0: USB hub found
[    2.599404] hub 5-0:1.0: 4 ports detected
[    2.599876] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.599888] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[    2.599927] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0b4b000
[    2.658989] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.658998] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.659003] usb usb6: Product: OHCI PCI host controller
[    2.659007] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.659010] usb usb6: SerialNumber: 0000:00:13.0
[    2.659422] hub 6-0:1.0: USB hub found
[    2.659442] hub 6-0:1.0: 4 ports detected
[    3.031165] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.035113] ata1.00: ATA-8: ST500LT012-9WS142, 0001LVM1, max UDMA/133
[    3.035122] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.035857] ata1.00: configured for UDMA/133
[    3.036114] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-9WS14 LVM1 PQ: 0 ANSI: 5
[    3.090933] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    3.238021] usb 1-4: New USB device found, idVendor=5986, idProduct=0294
[    3.238029] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.238034] usb 1-4: Product: Lenovo EasyCamera
[    3.238038] usb 1-4: Manufacturer: Bison Corp.
[    3.350848] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.418892] tsc: Refined TSC clocksource calibration: 1497.191 MHz
[    3.424640] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4902]
[    3.483766] usb 2-1: New USB device found, idVendor=0bda, idProduct=0129
[    3.483774] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.483779] usb 2-1: Product: USB2.0-CRW
[    3.483783] usb 2-1: Manufacturer: Generic
[    3.483787] usb 2-1: SerialNumber: 20100201396000000
[    3.489269] usbcore: registered new interface driver rtsx_usb
[    3.511297] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 739436
[    3.566284] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    4.007010] usb 6-2: new full-speed USB device number 2 using ohci-pci
[    4.176204] usb 6-2: New USB device found, idVendor=0cf3, idProduct=3004
[    4.176213] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.176218] usb 6-2: Product: Bluetooth USB Host Controller
[    4.176222] usb 6-2: Manufacturer: Atheros Communications
[    4.176226] usb 6-2: SerialNumber: Alaska Day 2006
[    4.419307] Switched to clocksource tsc
[    4.443043] usb 5-1: new full-speed USB device number 2 using ohci-pci
[    4.616239] usb 5-1: New USB device found, idVendor=046d, idProduct=c52f
[    4.616248] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.616253] usb 5-1: Product: USB Receiver
[    4.616257] usb 5-1: Manufacturer: Logitech
[    4.622092] hidraw: raw HID events driver (C) Jiri Kosina
[    4.630660] usbcore: registered new interface driver usbhid
[    4.630667] usbhid: USB HID core driver
[    4.631977] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:046D:C52F.0001/input/input3
[    4.632158] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
[    4.635250] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.1/0003:046D:C52F.0002/input/input4
[    4.635499] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
[   12.539665] ata2: softreset failed (1st FIS failed)
[   22.540431] ata2: softreset failed (1st FIS failed)
[   57.543114] ata2: softreset failed (1st FIS failed)
[   57.543187] ata2: limiting SATA link speed to 1.5 Gbps
[   62.731562] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   62.731573] ata2.00: link online but device misclassified
[   62.731577] ata2: link online but 1 devices misclassified, device detection might fail
[   62.735231] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[   62.735239] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   62.735423] sd 0:0:0:0: [sda] Write Protect is off
[   62.735429] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   62.735493] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   63.147156]  sda: sda1 sda2 sda3 sda4
[   63.148161] sd 0:0:0:0: [sda] Attached SCSI disk
[   63.149204] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   63.498986] PM: Starting manual resume from disk
[   63.498996] PM: Hibernation image partition 8:3 present
[   63.498999] PM: Looking for hibernation image.
[   63.499450] PM: Image not found (code -22)
[   63.499454] PM: Hibernation image not present or could not be loaded.
[   63.693250] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   64.319942] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[   64.320329] systemd[1]: Detected architecture 'x86-64'.
[   64.508520] systemd[1]: Inserted module 'autofs4'
[   64.532534] systemd[1]: Set hostname to <local>.
[   64.622516] random: nonblocking pool is initialized
[   65.906315] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[   65.907070] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   65.907206] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   65.907235] systemd[1]: Starting Remote File Systems (Pre).
[   65.907292] systemd[1]: Reached target Remote File Systems (Pre).
[   65.907331] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   65.907396] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   65.907420] systemd[1]: Starting Encrypted Volumes.
[   65.907443] systemd[1]: Reached target Encrypted Volumes.
[   65.907488] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   65.907668] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   65.907698] systemd[1]: Expecting device dev-sda3.device...
[   65.907722] systemd[1]: Expecting device dev-disk-by\x2duuid-f3a80c00\x2d7b27\x2d488c\x2d8fa4\x2df9783279c91a.device...
[   65.907748] systemd[1]: Expecting device dev-disk-by\x2duuid-4EC3\x2d279C.device...
[   65.907772] systemd[1]: Expecting device dev-disk-by\x2duuid-1715b1a6\x2d445b\x2d4302\x2d8888\x2de469f46f601f.device...
[   65.907795] systemd[1]: Starting Root Slice.
[   65.907845] systemd[1]: Created slice Root Slice.
[   65.907867] systemd[1]: Starting User and Session Slice.
[   65.907944] systemd[1]: Created slice User and Session Slice.
[   65.907968] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   65.908038] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   65.908061] systemd[1]: Starting Delayed Shutdown Socket.
[   65.908112] systemd[1]: Listening on Delayed Shutdown Socket.
[   65.908134] systemd[1]: Starting Journal Socket (/dev/log).
[   65.908201] systemd[1]: Listening on Journal Socket (/dev/log).
[   65.908230] systemd[1]: Starting udev Control Socket.
[   65.908279] systemd[1]: Listening on udev Control Socket.
[   65.908306] systemd[1]: Starting udev Kernel Socket.
[   65.908352] systemd[1]: Listening on udev Kernel Socket.
[   65.908379] systemd[1]: Starting Journal Socket.
[   65.908443] systemd[1]: Listening on Journal Socket.
[   65.908483] systemd[1]: Starting System Slice.
[   65.908551] systemd[1]: Created slice System Slice.
[   65.908586] systemd[1]: Started File System Check on Root Device.
[   65.908605] systemd[1]: Starting system-systemd\x2dfsck.slice.
[   65.908697] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   65.908721] systemd[1]: Starting system-getty.slice.
[   65.908805] systemd[1]: Created slice system-getty.slice.
[   65.908849] systemd[1]: Starting Increase datagram queue length...
[   65.915850] systemd[1]: Started Set Up Additional Binary Formats.
[   65.915953] systemd[1]: Starting udev Coldplug all Devices...
[   65.940501] systemd[1]: Starting Load Kernel Modules...
[   65.941484] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   65.942278] systemd[1]: Mounting POSIX Message Queue File System...
[   65.943080] systemd[1]: Mounting Huge Pages File System...
[   65.943952] systemd[1]: Mounting Debug File System...
[   65.944728] systemd[1]: Starting Slices.
[   65.944767] systemd[1]: Reached target Slices.
[   66.080587] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   66.081025] systemd[1]: Starting Create Static Device Nodes in /dev...
[   66.127189] systemd[1]: Started udev Coldplug all Devices.
[   66.361833] systemd[1]: Started Increase datagram queue length.
[   66.362037] systemd[1]: Starting Syslog Socket.
[   66.362118] systemd[1]: Listening on Syslog Socket.
[   66.362148] systemd[1]: Starting Journal Service...
[   66.363056] systemd[1]: Started Journal Service.
[   66.627821] lp: driver loaded but no devices found
[   66.630493] ppdev: user-space parallel port driver
[   66.758966] fuse init (API version 7.23)
[   66.863867] systemd-udevd[183]: starting version 215
[   67.844839] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   67.953949] ACPI: acpi_idle registered with cpuidle
[   67.978443] acpi-cpufreq: overriding BIOS provided _PSD data
[   68.007360] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   68.007373] ACPI: Power Button [PWRB]
[   68.007519] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[   68.007615] ACPI: Lid Switch [LID]
[   68.007714] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   68.007719] ACPI: Power Button [PWRF]
[   68.024616] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   68.024738] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   68.024771] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   68.064075] acpi device:00: registered as cooling_device4
[   68.064207] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   68.064308] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[   68.064692] acpi device:0a: registered as cooling_device5
[   68.064802] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input9
[   68.135888] ACPI: Battery Slot [BAT1] (battery present)
[   68.154650] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMB0) (20140424/utaddress-254)
[   68.154664] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   68.185761] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   68.300486] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input10
[   68.362845] ACPI: AC Adapter [ACAD] (on-line)
[   68.381569] [drm] Initialized drm 1.1.0 20060810
[   68.468718] EDAC MC: Ver: 3.0.0
[   68.496893] MCE: In-kernel MCE decoding enabled.
[   68.498453] AMD64 EDAC driver v3.4.0
[   68.498496] EDAC amd64: DRAM ECC disabled.
[   68.498512] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[   68.538271] EFI Variables Facility v0.08 2004-May-17
[   68.750547] input: PC Speaker as /devices/platform/pcspkr/input/input11
[   68.757410] pstore: Registered efi as persistent store backend
[   69.042277] snd_hda_intel 0000:00:01.1: irq 81 for MSI/MSI-X
[   69.042448] snd_hda_intel 0000:00:14.2: irq 82 for MSI/MSI-X
[   69.069374] cfg80211: Calling CRDA to update world regulatory domain
[   69.217952] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input12
[   69.246980] [drm] radeon kernel modesetting enabled.
[   69.247013] VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[   69.250706] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree.                                                             
[   69.250966] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree.                                                             
[   69.274390] sound hdaudioC1D0: CX20757: BIOS auto-probing.
[   69.274631] sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   69.274637] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   69.274641] sound hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   69.274645] sound hdaudioC1D0:    mono: mono_out=0x0
[   69.274648] sound hdaudioC1D0:    inputs:
[   69.274654] sound hdaudioC1D0:      Internal Mic=0x1a
[   69.274658] sound hdaudioC1D0:      Mic=0x19
[   69.278424] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input13
[   69.278856] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[   69.278998] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[   69.355215] ath: phy0: Set BT/WLAN RX diversity capability
[   69.362249] ath: phy0: ASPM enabled: 0x42
[   69.362257] ath: EEPROM regdomain: 0x65
[   69.362260] ath: EEPROM indicates we should expect a direct regpair map
[   69.362265] ath: Country alpha2 being used: 00
[   69.362268] ath: Regpair used: 0x65
[   69.433487] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   69.434350] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004d80000, irq=36
[   69.653348] Bluetooth: Core ver 2.19
[   69.653426] NET: Registered protocol family 31
[   69.653432] Bluetooth: HCI device and connection manager initialized
[   69.653459] Bluetooth: HCI socket layer initialized
[   69.653469] Bluetooth: L2CAP socket layer initialized
[   69.653504] Bluetooth: SCO socket layer initialized
[   69.699072] AVX version of gcm_enc/dec engaged.
[   69.702871] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[   69.910490] usbcore: registered new interface driver btusb
[   69.955248] usb 6-2: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2)
[   69.955311] media: Linux media interface: v0.10
[   69.955427] usb 6-2: Direct firmware load failed with error -2
[   69.955439] usb 6-2: Falling back to user helper
[   69.957373] Bluetooth: Loading patch file failed
[   69.957488] ath3k: probe of 6-2:1.0 failed with error -12
[   69.957653] usbcore: registered new interface driver ath3k
[   69.958650] alg: No test for crc32 (crc32-pclmul)
[   69.996284] Linux video capture interface: v2.00
[   70.117906] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0294)
[   70.120483] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input16
[   70.120769] usbcore: registered new interface driver uvcvideo
[   70.120776] USB Video Class driver (1.1.1)
[   70.146426] kvm: disabled by bios
[   70.162607] kvm: disabled by bios
[   70.183303] kvm: disabled by bios
[   70.198429] kvm: disabled by bios
[   70.793460] Adding 9765884k swap on /dev/sda3.  Priority:-1 extents:1 across:9765884k FS
[   70.917179] cfg80211: World regulatory domain updated:
[   70.917198] cfg80211:  DFS Master region: unset
[   70.917204] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   70.917214] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   70.917223] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   70.917230] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   70.917239] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   70.917249] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   70.917257] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   70.917264] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   70.917271] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   71.820019] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   72.102187] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   72.233200] systemd-journald[170]: Received request to flush runtime journal from PID 1
[   73.401883] RPC: Registered named UNIX socket transport module.
[   73.401897] RPC: Registered udp transport module.
[   73.401902] RPC: Registered tcp transport module.
[   73.401907] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   73.442537] FS-Cache: Loaded
[   73.467557] FS-Cache: Netfs 'nfs' registered for caching
[   73.525606] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   79.093891] alx 0000:02:00.0: irq 83 for MSI/MSI-X
[   79.095895] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   79.121110] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   80.421810] wlan0: authenticate with c8:3a:35:15:45:a8
[   80.428928] wlan0: send auth to c8:3a:35:15:45:a8 (try 1/3)
[   80.454926] wlan0: authenticated
[   80.456952] wlan0: associate with c8:3a:35:15:45:a8 (try 1/3)
[   80.465614] wlan0: RX AssocResp from c8:3a:35:15:45:a8 (capab=0x411 status=0 aid=5)
[   80.465743] wlan0: associated
[   80.465788] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready