Lenovo v310-15isk - не запустилось ядро из бэкпорта, 4,9.0 amd64

[rkanav]

 Сейчас сделаю. Пока выполнил apt-get upgrade. Все нормально (ничего не изменилось)
lshw

Открыть содержимое (спойлер)

lshw
romeneverfell             
    description: Computer
    width: 64 bits
    capabilities: smbios-2.8 vsyscall32
  *-core
       description: Motherboard
       physical id: 0
     *-memory
          description: System memory
          physical id: 0
          size: 3249MiB
     *-cpu
          product: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz
          vendor: Intel Corp.
          physical id: 1
          bus info: cpu@0
          size: 756MHz
          capacity: 2800MHz
          width: 64 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp cpufreq
     *-pci
          description: Host bridge
          product: Skylake Host Bridge/DRAM Registers
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 08
          width: 32 bits
          clock: 33MHz
        *-display
             description: VGA compatible controller
             product: HD Graphics 520
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 07
             width: 64 bits
             clock: 33MHz
             capabilities: pciexpress msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             resources: irq:128 memory:d0000000-d0ffffff memory:b0000000-bfffffff ioport:f000(size=64) memory:c0000-dffff
        *-usb
             description: USB controller
             product: Sunrise Point-LP USB 3.0 xHCI Controller
             vendor: Intel Corporation
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 21
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             resources: irq:124 memory:d1300000-d130ffff
        *-generic
             description: Signal processing controller
             product: Sunrise Point-LP Thermal subsystem
             vendor: Intel Corporation
             physical id: 14.2
             bus info: pci@0000:00:14.2
             version: 21
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=intel_pch_thermal latency=0
             resources: irq:18 memory:d132a000-d132afff
        *-communication
             description: Communication controller
             product: Sunrise Point-LP CSME HECI #1
             vendor: Intel Corporation
             physical id: 16
             bus info: pci@0000:00:16.0
             version: 21
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             resources: irq:126 memory:d132c000-d132cfff
        *-storage
             description: SATA controller
             product: Sunrise Point-LP SATA Controller [AHCI mode]
             vendor: Intel Corporation
             physical id: 17
             bus info: pci@0000:00:17.0
             version: 21
             width: 32 bits
             clock: 66MHz
             capabilities: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:125 memory:d1328000-d1329fff memory:d1331000-d13310ff ioport:f080(size=8) ioport:f088(size=4) ioport:f060(size=32) memory:d132f000-d132f7ff
        *-pci:0
             description: PCI bridge
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: f1
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:120 ioport:e000(size=4096) memory:d1200000-d12fffff ioport:c0000000(size=268435456)
           *-display UNCLAIMED
                description: Display controller
                product: Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430]
                vendor: Advanced Micro Devices, Inc. [AMD/ATI]
                physical id: 0
                bus info: pci@0000:01:00.0
                version: 83
                width: 64 bits
                clock: 33MHz
                capabilities: pm pciexpress msi bus_master cap_list
                configuration: latency=0
                resources: memory:c0000000-cfffffff memory:d1200000-d123ffff ioport:e000(size=256) memory:d1240000-d125ffff
        *-pci:1
             description: PCI bridge
             product: Sunrise Point-LP PCI Express Root Port #5
             vendor: Intel Corporation
             physical id: 1c.4
             bus info: pci@0000:00:1c.4
             version: f1
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:121 ioport:d000(size=4096) memory:d1100000-d11fffff
           *-network
                description: Ethernet interface
                product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:02:00.0
                logical name: eth0
                version: 15
                serial: 54:ab:3a:e4:f2:4a
                size: 1Gbit/s
                capacity: 1Gbit/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
                resources: irq:123 ioport:d000(size=256) memory:d1104000-d1104fff memory:d1100000-d1103fff
        *-pci:2
             description: PCI bridge
             product: Sunrise Point-LP PCI Express Root Port #6
             vendor: Intel Corporation
             physical id: 1c.5
             bus info: pci@0000:00:1c.5
             version: f1
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:122 memory:d1000000-d10fffff
           *-network DISABLED
                description: Wireless interface
                product: Dual Band Wireless-AC 3165 Plus Bluetooth
                vendor: Intel Corporation
                physical id: 0
                bus info: pci@0000:03:00.0
                logical name: wlan0
                version: 99
                serial: 68:07:15:ec:7c:78
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=iwlwifi driverversion=4.7.0-0.bpo.1-amd64 firmware=21.302800.0 latency=0 link=no multicast=yes wireless=IEEE 802.11
                resources: irq:127 memory:d1000000-d1001fff
        *-isa
             description: ISA bridge
             product: Sunrise Point-LP LPC Controller
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 21
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-memory UNCLAIMED
             description: Memory controller
             product: Sunrise Point-LP PMC
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 21
             width: 32 bits
             clock: 33MHz (30.3ns)
             capabilities: bus_master
             configuration: latency=0
             resources: memory:d1324000-d1327fff
        *-multimedia
             description: Audio device
             product: Sunrise Point-LP HD Audio
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 21
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=snd_hda_intel latency=64
             resources: irq:129 memory:d1320000-d1323fff memory:d1310000-d131ffff
        *-serial
             description: SMBus
             product: Sunrise Point-LP SMBus
             vendor: Intel Corporation
             physical id: 1f.4
             bus info: pci@0000:00:1f.4
             version: 21
             width: 64 bits
             clock: 33MHz
             configuration: driver=i801_smbus latency=0
             resources: irq:16 memory:d1330000-d13300ff ioport:1000(size=32)
     *-scsi
          physical id: 2
          logical name: scsi1
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: WDC WD10JPCX-24U
             vendor: Western Digital
             physical id: 0.0.0
             bus info: scsi@1:0.0.0
             logical name: /dev/sda
             version: 1A01
             serial: WD-WX11A76AXR48
             size: 931GiB (1TB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=d9fa2484
           *-volume:0
                description: Windows NTFS volume
                physical id: 1
                bus info: scsi@1:0.0.0,1
                logical name: /dev/sda1
                version: 3.1
                serial: da86-37b8
                size: 498MiB
                capacity: 500MiB
                capabilities: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2017-02-24 12:36:49 filesystem=ntfs label=System Reserved modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
           *-volume:1
                description: Windows NTFS volume
                physical id: 2
                bus info: scsi@1:0.0.0,2
                logical name: /dev/sda2
                version: 3.1
                serial: 2c43ec39-0113-fe44-b0b4-445ea994febe
                size: 833GiB
                capacity: 833GiB
                capabilities: primary ntfs initialized
                configuration: clustersize=4096 created=2017-02-24 12:37:03 filesystem=ntfs state=clean
           *-volume:2
                description: EXT4 volume
                vendor: Linux
                physical id: 3
                bus info: scsi@1:0.0.0,3
                logical name: /dev/sda3
                logical name: /
                version: 1.0
                serial: 31c48638-add1-4861-b7a3-c6906938c4cc
                size: 86GiB
                capacity: 86GiB
                capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2017-03-08 02:42:21 filesystem=ext4 label=rootMX-16 lastmountpoint=/ modified=2017-03-08 15:05:49 mount.fstype=ext4 mount.options=rw,noatime,data=ordered mounted=2017-03-08 15:05:49 state=mounted
           *-volume:3
                description: Linux swap volume
                physical id: 4
                bus info: scsi@1:0.0.0,4
                logical name: /dev/sda4
                version: 1
                serial: 1c09ba75-187b-4bf0-9d90-b4a673b516ed
                size: 10GiB
                capacity: 10GiB
                capabilities: primary nofs swap initialized
                configuration: filesystem=swap pagesize=4096

[свернуть]

.

[Aalexeey]

Сейчас сделаю

Мы ждёмс, не забудьте также сделать образ раздела efi, если он у вас есть, а также home если он у вас есть отделённым. Займитесь сейчас только этим, не засоряйте систему.

[rkanav]

Мы ждёмс, не забудьте также сделать образ раздела efi, если он у вас есть, а также home если он у вас есть отделённым. Займитесь сейчас только этим, не засоряйте систему.

У меня все в одном разделе, ну кроме swap. Образ созадл успешно. Разделы у меня следующие (может важно наличие win 10)

Открыть содержимое (спойлер)

       description: ATA Disk
             product: WDC WD10JPCX-24U
             vendor: Western Digital
             physical id: 0.0.0
             bus info: scsi@1:0.0.0
             logical name: /dev/sda
             version: 1A01
             serial: WD-WX11A76AXR48
             size: 931GiB (1TB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=d9fa2484
           *-volume:0
                description: Windows NTFS volume
                physical id: 1
                bus info: scsi@1:0.0.0,1
                logical name: /dev/sda1
                version: 3.1
                serial: da86-37b8
                size: 498MiB
                capacity: 500MiB
                capabilities: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2017-02-24 12:36:49 filesystem=ntfs label=System Reserved modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
           *-volume:1
                description: Windows NTFS volume
                physical id: 2
                bus info: scsi@1:0.0.0,2
                logical name: /dev/sda2
                version: 3.1
                serial: 2c43ec39-0113-fe44-b0b4-445ea994febe
                size: 833GiB
                capacity: 833GiB
                capabilities: primary ntfs initialized
                configuration: clustersize=4096 created=2017-02-24 12:37:03 filesystem=ntfs state=clean
           *-volume:2
                description: EXT4 volume
                vendor: Linux
                physical id: 3
                bus info: scsi@1:0.0.0,3
                logical name: /dev/sda3
                logical name: /
                version: 1.0
                serial: 31c48638-add1-4861-b7a3-c6906938c4cc
                size: 86GiB
                capacity: 86GiB
                capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2017-03-08 02:42:21 filesystem=ext4 label=rootMX-16 lastmountpoint=/ modified=2017-03-08 15:05:49 mount.fstype=ext4 mount.options=rw,noatime,data=ordered mounted=2017-03-08 15:05:49 state=mounted
           *-volume:3
                description: Linux swap volume
                physical id: 4
                bus info: scsi@1:0.0.0,4
                logical name: /dev/sda4
                version: 1
                serial: 1c09ba75-187b-4bf0-9d90-b4a673b516ed
                size: 10GiB
                capacity: 10GiB
                capabilities: primary nofs swap initialized
                configuration: filesystem=swap pagesize=4096

[свернуть]

[Aalexeey]

все в одном разделе

Это вам только кажется, раздел sda1 это efi раздел общий для Debian'a и Винды. Его UUID serial: da86-37b8 что говорит о FAT32/VFAT файловой системе, на которой и находится обычно efi, и размер всего 500MB. Насчёт FAT могу ошибаться но efi у винды есть обязательно. Раздел под Linux у вас большой и если со временем вы его засорите не системными файлами то образ будет создавать долго, разворачивать долго и места он будет занимать много. То же и про винду раздел огромный, его заполнят со временем не системные файлы и образ создать будет невозможно.

[rkanav]

Видеокарта AMD системой в принципе не определяется. Поэтому драйвер fglrx и свободные драйвера не ставятся.

[qupl]

Код Выделить Развернуть

lspci -nnk | grep -ie net -ie vga
cat /var/log/Xorg.0.log
uname -a
cat /etc/apt/sources.list

[rkanav]

С видеокартой грустно

Открыть содержимое (спойлер)

lspci -nnk | grep -ie net -ie vga
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 520 [8086:1916] (rev 07)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
03:00.0 Network controller [0280]: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth [8086:3166] (rev 99)

[свернуть]

Открыть содержимое (спойлер)

cat /var/log/Xorg.0.log
[    22.898]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    22.898] X Protocol Version 11, Revision 0
[    22.898] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    22.898] Current Operating System: Linux RomeNeverFell 4.7.0-0.bpo.1-amd64 #1 SMP MX 4.7.8-1mx16+3 (2017-02-23) x86_64
[    22.898] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-0.bpo.1-amd64 root=UUID=31c48638-add1-4861-b7a3-c6906938c4cc ro zswap.zpool=zsmalloc quiet initrd=/antiX/initrd.gz BOOT_IMAGE=/antiX/vmlinuz
[    22.899] Build Date: 11 February 2015  12:32:02AM
[    22.899] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[    22.899] Current version of pixman: 0.32.6
[    22.899]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    22.899] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.899] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar  8 18:43:36 2017
[    22.977] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    22.977] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.044] (==) No Layout section.  Using the first Screen section.
[    23.044] (==) No screen section available. Using defaults.
[    23.044] (**) |-->Screen "Default Screen Section" (0)
[    23.044] (**) |   |-->Monitor "<default monitor>"
[    23.061] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    23.061] (==) Automatically adding devices
[    23.061] (==) Automatically enabling devices
[    23.061] (==) Automatically adding GPU devices
[    23.182] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.182]    Entry deleted from font path.
[    23.252] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[    23.252] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.252] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.276] (II) Loader magic: 0x562b6238cd80
[    23.276] (II) Module ABI versions:
[    23.276]    X.Org ANSI C Emulation: 0.4
[    23.276]    X.Org Video Driver: 18.0
[    23.276]    X.Org XInput driver : 21.0
[    23.276]    X.Org Server Extension : 8.0
[    23.276] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.279] (--) PCI:*(0:0:2:0) 8086:1916:17aa:39fd rev 7, Mem @ 0xd0000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x??/131072
[    23.279] (--) PCI: (0:1:0:0) 1002:6660:17aa:381a rev 131, Mem @ 0xc0000000/268435456, 0xd1200000/262144, I/O @ 0x0000e000/256, BIOS @ 0x??/131072
[    23.300] (II) LoadModule: "glx"
[    23.361] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    23.725] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    23.725]    compiled for 6.9.0, module version = 1.0.0
[    23.725] (==) Matched intel as autoconfigured driver 0
[    23.725] (==) Matched intel as autoconfigured driver 1
[    23.725] (==) Matched modesetting as autoconfigured driver 2
[    23.725] (==) Matched fbdev as autoconfigured driver 3
[    23.725] (==) Matched vesa as autoconfigured driver 4
[    23.725] (==) Assigned the driver to the xf86ConfigLayout
[    23.725] (II) LoadModule: "intel"
[    23.754] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.903] (II) Module intel: vendor="X.Org Foundation"
[    23.903]    compiled for 1.16.4, module version = 2.99.917
[    23.903]    Module class: X.Org Video Driver
[    23.903]    ABI class: X.Org Video Driver, version 18.0
[    23.903] (II) LoadModule: "modesetting"
[    23.903] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    23.904] (II) Module modesetting: vendor="X.Org Foundation"
[    23.904]    compiled for 1.16.4, module version = 0.9.0
[    23.904]    Module class: X.Org Video Driver
[    23.904]    ABI class: X.Org Video Driver, version 18.0
[    23.904] (II) LoadModule: "fbdev"
[    23.904] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.922] (II) Module fbdev: vendor="X.Org Foundation"
[    23.922]    compiled for 1.15.99.904, module version = 0.4.4
[    23.922]    Module class: X.Org Video Driver
[    23.922]    ABI class: X.Org Video Driver, version 18.0
[    23.922] (II) LoadModule: "vesa"
[    23.922] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.922] (II) Module vesa: vendor="X.Org Foundation"
[    23.922]    compiled for 1.15.99.904, module version = 2.3.3
[    23.922]    Module class: X.Org Video Driver
[    23.922]    ABI class: X.Org Video Driver, version 18.0
[    23.922] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
   i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
   915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
   Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    23.923] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    23.923] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    23.923] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    23.923] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    23.923] (II) FBDEV: driver for framebuffer: fbdev
[    23.923] (II) VESA: driver for VESA chipsets: vesa
[    23.923] (++) using VT number 7

[    23.938] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160425
[    23.938] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-2mx150+1 (Steven Pusser (Stevo) <maintainer@mepiscommunity.org>)
[    23.938] (II) intel(0): SNA compiled for use with valgrind
[    23.960] (WW) Falling back to old probe method for modesetting
[    23.960] (WW) Falling back to old probe method for fbdev
[    23.960] (II) Loading sub module "fbdevhw"
[    23.960] (II) LoadModule: "fbdevhw"
[    23.975] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.977] (II) Module fbdevhw: vendor="X.Org Foundation"
[    23.977]    compiled for 1.16.4, module version = 0.0.2
[    23.977]    ABI class: X.Org Video Driver, version 18.0
[    23.977] (WW) Falling back to old probe method for vesa
[    23.978] (--) intel(0): gen9 engineering sample
[    23.978] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[    23.978] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    23.978] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.978] (==) intel(0): RGB weight 888
[    23.978] (==) intel(0): Default visual is TrueColor
[    23.979] (II) intel(0): Output eDP1 has no monitor section
[    23.984] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    23.985] (II) intel(0): Enabled output eDP1
[    23.985] (II) intel(0): Output HDMI1 has no monitor section
[    23.985] (II) intel(0): Enabled output HDMI1
[    23.985] (II) intel(0): Output DP1 has no monitor section
[    23.985] (II) intel(0): Enabled output DP1
[    23.985] (II) intel(0): Output HDMI2 has no monitor section
[    23.985] (II) intel(0): Enabled output HDMI2
[    23.985] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    23.985] (II) intel(0): Output VIRTUAL1 has no monitor section
[    23.985] (II) intel(0): Enabled output VIRTUAL1
[    23.985] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    23.985] (==) intel(0): TearFree disabled
[    23.985] (++) intel(0): DPI set to (96, 96)
[    23.985] (II) Loading sub module "dri2"
[    23.985] (II) LoadModule: "dri2"
[    23.985] (II) Module "dri2" already built-in
[    23.985] (II) Loading sub module "present"
[    23.985] (II) LoadModule: "present"
[    23.985] (II) Module "present" already built-in
[    23.986] (II) UnloadModule: "modesetting"
[    23.986] (II) Unloading modesetting
[    23.986] (II) UnloadModule: "fbdev"
[    23.986] (II) Unloading fbdev
[    23.986] (II) UnloadSubModule: "fbdevhw"
[    23.986] (II) Unloading fbdevhw
[    23.986] (II) UnloadModule: "vesa"
[    23.986] (II) Unloading vesa
[    23.986] (==) Depth 24 pixmap format is 32 bpp
[    24.006] (II) intel(0): SNA initialized with generic backend
[    24.006] (==) intel(0): Backing store enabled
[    24.006] (==) intel(0): Silken mouse enabled
[    24.006] (II) intel(0): HW Cursor enabled
[    24.006] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    24.007] (==) intel(0): DPMS enabled
[    24.007] (==) intel(0): display hotplug detection enabled
[    24.007] (II) intel(0): Textured video not supported on this hardware
[    24.021] (II) intel(0): [DRI2] Setup complete
[    24.021] (II) intel(0): [DRI2]   DRI driver: i965
[    24.021] (II) intel(0): [DRI2]   VDPAU driver: i965
[    24.021] (II) intel(0): direct rendering: DRI2 enabled
[    24.021] (II) intel(0): hardware support for Present enabled
[    24.021] (--) RandR disabled
[    24.034] (II) SELinux: Disabled on system
[    24.042] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    24.048] (II) intel(0): Setting screen physical size to 508 x 285
[    25.202] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    25.202] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.202] (II) LoadModule: "evdev"
[    25.203] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.702] (II) Module evdev: vendor="X.Org Foundation"
[    25.702]    compiled for 1.16.0, module version = 2.9.0
[    25.702]    Module class: X.Org XInput Driver
[    25.702]    ABI class: X.Org XInput driver, version 21.0
[    25.702] (II) Using input driver 'evdev' for 'Power Button'
[    25.702] (**) Power Button: always reports core events
[    25.702] (**) evdev: Power Button: Device: "/dev/input/event6"
[    25.702] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.702] (--) evdev: Power Button: Found keys
[    25.702] (II) evdev: Power Button: Configuring as keyboard
[    25.702] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[    25.702] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    25.702] (**) Option "xkb_rules" "evdev"
[    25.702] (**) Option "xkb_model" "pc105"
[    25.702] (**) Option "xkb_layout" "ru,us"
[    25.702] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    25.953] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    25.953] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    25.953] (II) Using input driver 'evdev' for 'Video Bus'
[    25.953] (**) Video Bus: always reports core events
[    25.953] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    25.953] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    25.953] (--) evdev: Video Bus: Found keys
[    25.953] (II) evdev: Video Bus: Configuring as keyboard
[    25.953] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"
[    25.953] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    25.953] (**) Option "xkb_rules" "evdev"
[    25.953] (**) Option "xkb_model" "pc105"
[    25.953] (**) Option "xkb_layout" "ru,us"
[    25.953] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    25.954] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    25.954] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.954] (II) Using input driver 'evdev' for 'Power Button'
[    25.954] (**) Power Button: always reports core events
[    25.954] (**) evdev: Power Button: Device: "/dev/input/event5"
[    25.954] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.954] (--) evdev: Power Button: Found keys
[    25.954] (II) evdev: Power Button: Configuring as keyboard
[    25.954] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"
[    25.954] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id
[    25.954] (**) Option "xkb_rules" "evdev"
[    25.954] (**) Option "xkb_model" "pc105"
[    25.954] (**) Option "xkb_layout" "ru,us"
[    25.954] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    25.955] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    25.955] (II) No input driver specified, ignoring this device.
[    25.955] (II) This device may have been added with another device file.
[    25.956] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    25.956] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    25.956] (II) Using input driver 'evdev' for 'Sleep Button'
[    25.956] (**) Sleep Button: always reports core events
[    25.956] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    25.956] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    25.956] (--) evdev: Sleep Button: Found keys
[    25.956] (II) evdev: Sleep Button: Configuring as keyboard
[    25.956] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    25.956] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    25.956] (**) Option "xkb_rules" "evdev"
[    25.956] (**) Option "xkb_model" "pc105"
[    25.956] (**) Option "xkb_layout" "ru,us"
[    25.956] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    25.957] (II) config/udev: Adding input device Logitech M325 (/dev/input/event1)
[    25.957] (**) Logitech M325: Applying InputClass "evdev pointer catchall"
[    25.958] (II) Using input driver 'evdev' for 'Logitech M325'
[    25.958] (**) Logitech M325: always reports core events
[    25.958] (**) evdev: Logitech M325: Device: "/dev/input/event1"
[    25.958] (--) evdev: Logitech M325: Vendor 0x46d Product 0x400a
[    25.958] (--) evdev: Logitech M325: Found 20 mouse buttons
[    25.958] (--) evdev: Logitech M325: Found scroll wheel(s)
[    25.958] (--) evdev: Logitech M325: Found relative axes
[    25.958] (--) evdev: Logitech M325: Found x and y relative axes
[    25.958] (II) evdev: Logitech M325: Configuring as mouse
[    25.958] (II) evdev: Logitech M325: Adding scrollwheel support
[    25.958] (**) evdev: Logitech M325: YAxisMapping: buttons 4 and 5
[    25.958] (**) evdev: Logitech M325: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.958] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input3/event1"
[    25.958] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 10)
[    25.958] (II) evdev: Logitech M325: initialized for relative axes.
[    25.958] (**) Logitech M325: (accel) keeping acceleration scheme 1
[    25.958] (**) Logitech M325: (accel) acceleration profile 0
[    25.958] (**) Logitech M325: (accel) acceleration factor: 2.000
[    25.958] (**) Logitech M325: (accel) acceleration threshold: 4
[    25.959] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse0)
[    25.959] (II) No input driver specified, ignoring this device.
[    25.959] (II) This device may have been added with another device file.
[    25.959] (II) config/udev: Adding input device EasyCamera (/dev/input/event14)
[    25.959] (**) EasyCamera: Applying InputClass "evdev keyboard catchall"
[    25.959] (II) Using input driver 'evdev' for 'EasyCamera'
[    25.959] (**) EasyCamera: always reports core events
[    25.960] (**) evdev: EasyCamera: Device: "/dev/input/event14"
[    25.960] (--) evdev: EasyCamera: Vendor 0x4f2 Product 0xb57d
[    25.960] (--) evdev: EasyCamera: Found keys
[    25.960] (II) evdev: EasyCamera: Configuring as keyboard
[    25.960] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input15/event14"
[    25.960] (II) XINPUT: Adding extended input device "EasyCamera" (type: KEYBOARD, id 11)
[    25.960] (**) Option "xkb_rules" "evdev"
[    25.960] (**) Option "xkb_model" "pc105"
[    25.960] (**) Option "xkb_layout" "ru,us"
[    25.960] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    25.960] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event7)
[    25.960] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    25.960] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    25.960] (**) Ideapad extra buttons: always reports core events
[    25.960] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event7"
[    25.960] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    25.960] (--) evdev: Ideapad extra buttons: Found keys
[    25.960] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    25.960] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8/event7"
[    25.961] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[    25.961] (**) Option "xkb_rules" "evdev"
[    25.961] (**) Option "xkb_model" "pc105"
[    25.961] (**) Option "xkb_layout" "ru,us"
[    25.961] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    25.961] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    25.961] (II) No input driver specified, ignoring this device.
[    25.961] (II) This device may have been added with another device file.
[    25.961] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    25.961] (II) No input driver specified, ignoring this device.
[    25.961] (II) This device may have been added with another device file.
[    25.962] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    25.962] (II) No input driver specified, ignoring this device.
[    25.962] (II) This device may have been added with another device file.
[    25.962] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[    25.962] (II) No input driver specified, ignoring this device.
[    25.962] (II) This device may have been added with another device file.
[    25.962] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[    25.962] (II) No input driver specified, ignoring this device.
[    25.962] (II) This device may have been added with another device file.
[    25.963] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    25.963] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    25.963] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    25.963] (**) AT Translated Set 2 keyboard: always reports core events
[    25.963] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    25.963] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    25.963] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    25.963] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    25.963] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    25.963] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    25.963] (**) Option "xkb_rules" "evdev"
[    25.963] (**) Option "xkb_model" "pc105"
[    25.963] (**) Option "xkb_layout" "ru,us"
[    25.963] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    25.963] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event2)
[    25.963] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    25.964] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    25.964] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    25.964] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    25.964] (II) LoadModule: "synaptics"
[    25.964] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    26.058] (II) Module synaptics: vendor="X.Org Foundation"
[    26.058]    compiled for 1.16.0.901, module version = 1.8.99
[    26.058]    Module class: X.Org XInput Driver
[    26.058]    ABI class: X.Org XInput driver, version 21.0
[    26.058] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    26.058] (**) ETPS/2 Elantech Touchpad: always reports core events
[    26.058] (**) Option "Device" "/dev/input/event2"
[    26.071] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3082 (res 32)
[    26.071] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1508 (res 32)
[    26.071] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    26.071] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    26.071] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    26.071] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    26.071] (**) Option "VertEdgeScroll" "1"
[    26.071] (**) Option "HorizEdgeScroll" "1"
[    26.071] (**) Option "CornerCoasting" "1"
[    26.071] (**) Option "VertTwoFingerScroll" "1"
[    26.071] (**) Option "HorizTwoFingerScroll" "1"
[    26.071] (**) Option "RBCornerButton" "9"
[    26.071] (**) Option "LBCornerButton" "8"
[    26.071] (**) Option "TapButton1" "1"
[    26.071] (**) Option "TapButton2" "2"
[    26.071] (**) Option "TapButton3" "3"
[    26.071] (**) Option "CircularScrolling" "1"
[    26.071] (**) Option "CircScrollTrigger" "7"
[    26.071] (**) Option "MinSpeed" "0.5"
[    26.071] (**) Option "MaxSpeed" "1.0"
[    26.071] (**) Option "AccelFactor" "0.075"
[    26.071] (**) Option "CoastingSpeed" "8"
[    26.071] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    26.071] (**) ETPS/2 Elantech Touchpad: always reports core events
[    26.086] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    26.086] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    26.086] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.0
[    26.086] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 2.00
[    26.086] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.075
[    26.086] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    26.086] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    26.086] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    26.086] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    26.086] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    26.087] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    26.087] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    26.088] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event15)
[    26.088] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    26.088] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    26.088] (**) ACPI Virtual Keyboard Device: always reports core events
[    26.088] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event15"
[    26.088] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    26.089] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    26.089] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    26.089] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event15"
[    26.089] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15)
[    26.089] (**) Option "xkb_rules" "evdev"
[    26.089] (**) Option "xkb_model" "pc105"
[    26.089] (**) Option "xkb_layout" "ru,us"
[    26.089] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[   207.669] (II) intel(0): EDID vendor "CMN", prod id 5589
[   207.669] (II) intel(0): Printing DDC gathered Modelines:
[   207.669] (II) intel(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

[свернуть]

Открыть содержимое (спойлер)

uname -a
Linux RomeNeverFell 4.7.0-0.bpo.1-amd64 #1 SMP MX 4.7.8-1mx16+3 (2017-02-23) x86_64 GNU/Linux

[свернуть]

Открыть содержимое (спойлер)

cat: /etc/apt/sources.list: Нет такого файла или каталога

[свернуть]

[вложение удалено администратором]

[Aalexeey]

С видеокартой грустно

Пока рано говорить, т.к. у вас нет сети это немного осложняет задачу. Я так понял что установился и запустился боле менее нормально только MX-16 это уже более продвинутая версия Jessie и firmware ей точно нужны аналогичные или из бэкпортов. Проверьте в Synaptic стоит ли у вас пакет firmware-linux-free, если он установлен то необходимо скачать здесь http://mxrepo.com/mx/testrepo/pool/test/f/firmware-nonfree/ все только .deb firmware поместить их в папку DEBS эту папку например в $HOME открыть DEBS в терминале и:

Код Выделить Развернуть

sudo dpkg -i *.deb после этого все пакеты будут установленны и в терминале вы увидите всё ли прошло нормально, если нет то скопируйте всё от туда в файл .txt для последующих "разборок".

[rkanav]

С видеокартой грустно

Пока рано говорить, т.к. у вас нет сети это немного осложняет задачу. Я так понял что установился и запустился боле менее нормально только MX-16 это уже более продвинутая версия Jessie и firmware ей точно нужны аналогичные или из бэкпортов. Проверьте в Synaptic стоит ли у вас пакет firmware-linux-free, если он установлен то необходимо скачать здесь http://mxrepo.com/mx/testrepo/pool/test/f/firmware-nonfree/ все только .deb firmware поместить их в папку DEBS эту папку например в $HOME открыть DEBS в терминале и:

Код Выделить Развернуть

sudo dpkg -i *.deb после этого все пакеты будут установленны и в терминале вы увидите всё ли прошло нормально, если нет то скопируйте всё от туда в файл .txt для последующих "разборок".

Сеть есть только проводная.

[Aalexeey]

Сеть есть только проводная

Вот и хорошо значит вы можете установить эти пакеты из репов в Synaptic. Проверьте также стоят ли пакеты: xserver-xorg-video-radeon, xserver-xorg-video-vesa и xserver-xorg-video-intel, только проверьте. Если в Synaptic вам установить не получится (т.к. вы не очень знакомы с приоритетами) то ставьте способом выше.

[rkanav]

Сеть есть только проводная

Вот и хорошо значит вы можете установить эти пакеты из репов в Synaptic. Проверьте также стоят ли пакеты: xserver-xorg-video-radeon, xserver-xorg-video-vesa и xserver-xorg-video-intel, только проверьте. Если в Synaptic вам установить не получится (т.к. вы не очень знакомы с приоритетами) то ставьте способом выше.

Отсутствуют: cavium, intel sound, ivtv, netxen, samsung, siano, ti connectivity. остальные есть, версия 20160824

[Aalexeey]

остальные есть, версия 20160824

Значит т.к. у вас WiFi Intel то либо эти firmware устарели либо или ядро тоже.
Ещё по WiFi обратите внимание на то что вам писал ferum https://debianforum.ru/index.php?topic=12386.msg94928#msg94928
Те что я вам дал firmware будут здесь:

Код Выделить Развернуть

deb http://mxrepo.com/mx/testrepo/ mx15 test в /etc/apt/sources.list если файла там нет создайте, возможно в Synaptic уже есть и надо только раскоментировать (поставить галочку).
Последние ядра от liquorix тоже там например: linux-headers-4.9.0-12.1-liquorix-amd64_4.9-14mx150+1_amd64.deb + linux-image-4.9.0-12.1-liquorix-amd64_4.9-14mx150+1_amd64.deb последние годы ядра от liquorix очень хорошего качества, ещё более новые ядра уже писал здесь: http://maurom.com/kernel/
Проверьте ещё на всякие пожарные xserver-xorg-video-amdgpu и xserver-xorg-video-ati

[qupl]

Для дискретной видеокарты сразу пробуйте проприетарный драйвер с сайта AMD, потому что в radeon нет информации о поддержке.
По Wi-FI

Код Выделить Развернуть

rfkill list
dpkg -l | grep -i firmw
Список источников в вашей "сборке" размазан по /etc/apt/sources.list.d/* . В случае проблем с установкой/обновлением пакетов изучайте содержимое этих файлов.

[Aalexeey]

Свежий драйвер AMD есть в репах MX http://mxrepo.com/mx/testrepo/pool/test/f/fglrx-driver/

[rkanav]

Проприетарный встал, не нашел карту, не включился. запускал aticonfig --initial - не нашел карту. удалил

Cообщение объединено 09 марта 2017, 00:08:11
Сделал вот так

Открыть содержимое (спойлер)

sudo apt-get remove --purge xserver-xorg-video-radeon
$ sudo apt-get install fglrx-driver fglrx-control libgl1-fglrx-glx fglrx-atieventsd fglrx-modules-dkms

sudo apt-get install libgl1-fglrx-glx:i386

[свернуть]

. Теперь имеется следующая картина:

Открыть содержимое (спойлер)

cat /var/log/Xorg.0.log
[    22.254]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    22.254] X Protocol Version 11, Revision 0
[    22.254] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    22.254] Current Operating System: Linux RomeNeverFell 4.7.0-0.bpo.1-amd64 #1 SMP MX 4.7.8-1mx16+3 (2017-02-23) x86_64
[    22.254] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-0.bpo.1-amd64 root=UUID=31c48638-add1-4861-b7a3-c6906938c4cc ro zswap.zpool=zsmalloc quiet initrd=/antiX/initrd.gz BOOT_IMAGE=/antiX/vmlinuz
[    22.254] Build Date: 11 February 2015  12:32:02AM
[    22.254] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[    22.254] Current version of pixman: 0.32.6
[    22.254]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    22.254] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.255] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar  8 23:44:07 2017
[    22.309] (==) Using config file: "/etc/X11/xorg.conf"
[    22.309] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    22.309] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.576] (==) ServerLayout "aticonfig Layout"
[    22.576] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    22.576] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    22.616] (**) |   |-->Device "aticonfig-Device[0]-0"
[    22.616] (==) Automatically adding devices
[    22.616] (==) Automatically enabling devices
[    22.616] (==) Automatically adding GPU devices
[    22.730] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    22.730]    Entry deleted from font path.
[    22.773] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[    22.773] (==) ModulePath set to "/usr/lib/xorg/modules"
[    22.773] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    22.809] (II) Loader magic: 0x563d11f83d80
[    22.809] (II) Module ABI versions:
[    22.809]    X.Org ANSI C Emulation: 0.4
[    22.809]    X.Org Video Driver: 18.0
[    22.809]    X.Org XInput driver : 21.0
[    22.809]    X.Org Server Extension : 8.0
[    22.809] (II) xfree86: Adding drm device (/dev/dri/card0)
[    22.812] (--) PCI:*(0:0:2:0) 8086:1916:17aa:39fd rev 7, Mem @ 0xd0000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x??/131072
[    22.812] (--) PCI: (0:1:0:0) 1002:6660:17aa:381a rev 131, Mem @ 0xc0000000/268435456, 0xd1200000/262144, I/O @ 0x0000e000/256, BIOS @ 0x??/131072
[    23.066] (II) "glx" will be loaded by default.
[    23.066] (II) LoadModule: "glx"
[    23.270] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    23.294] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    23.294]    compiled for 6.9.0, module version = 1.0.0
[    23.294] (II) LoadModule: "fglrx"
[    23.294] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    24.539] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    24.539]    compiled for 1.4.99.906, module version = 15.30.3
[    24.539]    Module class: X.Org Video Driver
[    24.564] (II) Loading sub module "fglrxdrm"
[    24.564] (II) LoadModule: "fglrxdrm"
[    24.564] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    24.687] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    24.687]    compiled for 1.4.99.906, module version = 15.30.3
[    24.687] (II) AMD Proprietary Linux Driver Version Identifier:15.30.3
[    24.687] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.302                   
[    24.687] (II) AMD Proprietary Linux Driver Build Date: Dec 17 2015 02:43:16
[    24.687] (++) using VT number 7

[    24.700] (WW) Falling back to old probe method for fglrx
[    24.885] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    24.903] ukiDynamicMajor: found major device number 246
[    24.903] ukiDynamicMajor: found major device number 246
[    24.903] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    24.903] ukiOpenDevice: node name is /dev/ati/card0
[    24.903] ukiOpenDevice: open result is 9, (OK)
[    25.500] ukiOpenByBusid: ukiOpenMinor returns 9
[    25.501] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    25.578] (--) Chipset Supported AMD Graphics Processor (0x6660) found
[    25.594] (II) fglrx: intel VGA device detected, load intel driver.
[    25.594] (II) LoadModule: "intel"
[    25.594] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    25.694] (II) Module intel: vendor="X.Org Foundation"
[    25.694]    compiled for 1.16.4, module version = 2.99.917
[    25.694]    Module class: X.Org Video Driver
[    25.694]    ABI class: X.Org Video Driver, version 18.0
[    25.695] (II) fglrx(0): pEnt->device->identifier=0x563d13d0f240
[    25.715] (II) intel(1): pEnt->device->identifier=(nil)
[    25.715] (EE) Screen 1 deleted because of no matching config section.
[    25.715] (II) UnloadModule: "intel"
[    25.715] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[    25.715] (II) fglrx(0): FB driver is enabled
[    25.715] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[    26.105] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    26.105] (==) fglrx(0): RGB weight 888
[    26.105] (==) fglrx(0): Default visual is TrueColor
[    26.105] (**) fglrx(0): Option "Tiling" "off"
[    26.105] (**) fglrx(0): Option "LinearFramebuffer" "on"
[    26.105] (--) fglrx(0): gen9 engineering sample
[    26.105] (**) fglrx(0): Relaxed fencing enabled
[    26.105] (**) fglrx(0): Wait on SwapBuffers? enabled
[    26.105] (**) fglrx(0): Triple buffering? enabled
[    26.105] (**) fglrx(0): Framebuffer linear
[    26.105] (**) fglrx(0): Pixmaps linear
[    26.105] (**) fglrx(0): 3D buffers tiled
[    26.162] (**) fglrx(0): SwapBuffers wait enabled
[    26.162] (==) fglrx(0): video overlay key set to 0x101fe
[    26.163] (II) fglrx(0): Output eDP1 using monitor section aticonfig-Monitor[0]-0
[    26.163] (--) fglrx(0): found backlight control interface intel_backlight
[    26.251] (II) fglrx(0): Output HDMI1 has no monitor section
[    26.253] (II) fglrx(0): Output DP1 has no monitor section
[    26.341] (II) fglrx(0): Output HDMI2 has no monitor section
[    26.341] (II) fglrx(0): EDID for output eDP1
[    26.341] (II) fglrx(0): Manufacturer: CMN  Model: 15d5  Serial#: 0
[    26.341] (II) fglrx(0): Year: 2015  Week: 38
[    26.341] (II) fglrx(0): EDID Version: 1.4
[    26.341] (II) fglrx(0): Digital Display Input
[    26.341] (II) fglrx(0): 6 bits per channel
[    26.341] (II) fglrx(0): Digital interface is DisplayPort
[    26.341] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.341] (II) fglrx(0): Gamma: 2.20
[    26.341] (II) fglrx(0): No DPMS capabilities specified
[    26.341] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[    26.341] (II) fglrx(0): First detailed timing is preferred mode
[    26.341] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[    26.341] (II) fglrx(0): redX: 0.554 redY: 0.322   greenX: 0.327 greenY: 0.582
[    26.342] (II) fglrx(0): blueX: 0.163 blueY: 0.134   whiteX: 0.313 whiteY: 0.329
[    26.342] (II) fglrx(0): Manufacturer's mask: 0
[    26.342] (II) fglrx(0): Supported detailed timing:
[    26.342] (II) fglrx(0): clock: 152.8 MHz   Image Size:  344 x 193 mm
[    26.342] (II) fglrx(0): h_active: 1920  h_sync: 1964  h_sync_end 1992 h_blank_end 2250 h_border: 0
[    26.342] (II) fglrx(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1132 v_border: 0
[    26.342] (II) fglrx(0):  N156HGA-EAB
[    26.342] (II) fglrx(0):  CMN
[    26.342] (II) fglrx(0):  N156HGA-EAB
[    26.342] (II) fglrx(0): EDID (in hex):
[    26.342] (II) fglrx(0):    00ffffffffffff000daed51500000000
[    26.342] (II) fglrx(0):    261901049522137802ecd58d52539529
[    26.342] (II) fglrx(0):    22505400000001010101010101010101
[    26.342] (II) fglrx(0):    010101010101b43b804a713834402c1c
[    26.342] (II) fglrx(0):    240058c110000018000000fe004e3135
[    26.342] (II) fglrx(0):    364847412d4541420a20000000fe0043
[    26.342] (II) fglrx(0):    4d4e0a202020202020202020000000fe
[    26.342] (II) fglrx(0):    004e3135364847412d4541420a20001b
[    26.342] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "576x432" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "680x384" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "680x384" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "720x450" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "800x512" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "840x525" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "840x525" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "960x540" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "960x600" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[    26.342] (II) fglrx(0): Printing probed modes for output eDP1
[    26.342] (II) fglrx(0): Modeline "1920x1080"x60.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)
[    26.342] (II) fglrx(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    26.342] (II) fglrx(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    26.342] (II) fglrx(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    26.342] (II) fglrx(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    26.342] (II) fglrx(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    26.342] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    26.342] (II) fglrx(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    26.342] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    26.342] (II) fglrx(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    26.342] (II) fglrx(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    26.343] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    26.343] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    26.343] (II) fglrx(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    26.343] (II) fglrx(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    26.343] (II) fglrx(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    26.431] (II) fglrx(0): EDID for output HDMI1
[    26.433] (II) fglrx(0): EDID for output DP1
[    26.522] (II) fglrx(0): EDID for output HDMI2
[    26.522] (II) fglrx(0): Output eDP1 connected
[    26.522] (II) fglrx(0): Output HDMI1 disconnected
[    26.522] (II) fglrx(0): Output DP1 disconnected
[    26.522] (II) fglrx(0): Output HDMI2 disconnected
[    26.522] (II) fglrx(0): Using exact sizes for initial modes
[    26.522] (II) fglrx(0): Output eDP1 using initial mode 1920x1080
[    26.522] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.522] (II) fglrx(0): Kernel page flipping support detected, enabling
[    26.522] (++) fglrx(0): DPI set to (96, 96)
[    26.522] (II) Loading sub module "fb"
[    26.522] (II) LoadModule: "fb"
[    26.541] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.645] (II) Module fb: vendor="X.Org Foundation"
[    26.645]    compiled for 1.16.4, module version = 1.0.0
[    26.645]    ABI class: X.Org ANSI C Emulation, version 0.4
[    26.645] (II) Loading sub module "dri2"
[    26.645] (II) LoadModule: "dri2"
[    26.645] (II) Module "dri2" already built-in
[    26.645] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    26.645] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    26.645] (==) fglrx(0): Default visual is TrueColor
[    26.645] (**) fglrx(0): Option "DPMS" "true"
[    26.645] (**) fglrx(0): Option "ShadowFB" "off"
[    26.645] (==) fglrx(0): RGB weight 888
[    26.645] (II) fglrx(0): Using 8 bits per RGB
[    26.645] (==) fglrx(0): Buffer Tiling is ON
[    26.645] (II) Loading sub module "fglrxdrm"
[    26.645] (II) LoadModule: "fglrxdrm"
[    26.646] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    26.646] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    26.646]    compiled for 1.4.99.906, module version = 15.30.3
[    26.649] ukiDynamicMajor: found major device number 246
[    26.649] ukiDynamicMajor: found major device number 246
[    26.649] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    26.649] ukiOpenDevice: node name is /dev/ati/card0
[    26.649] ukiOpenDevice: open result is 12, (OK)
[    26.649] ukiOpenByBusid: ukiOpenMinor returns 12
[    26.649] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    26.649] (**) fglrx(0): NoAccel = NO
[    26.649] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    26.650] (--) fglrx(0): Chipset: "AMD Radeon (TM) R5 M330" (Chipset = 0x6660)
[    26.650] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x381a)
[    26.650] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    26.650] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    26.650] (--) fglrx(0): MMIO registers at 0xd1200000
[    26.650] (--) fglrx(0): I/O port at 0x0000e000
[    26.650] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    26.663] (II) fglrx(0): AC Adapter is used
[    26.663] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    26.663] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3
[    26.663] (II) fglrx(0): PCIE card detected
[    26.663] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    26.663] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    27.403] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[    27.403] (II) fglrx(0): RandR 1.2 support is enabled!
[    27.403] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    27.403] (II) Loading sub module "fb"
[    27.403] (II) LoadModule: "fb"
[    27.404] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.404] (II) Module fb: vendor="X.Org Foundation"
[    27.404]    compiled for 1.16.4, module version = 1.0.0
[    27.404]    ABI class: X.Org ANSI C Emulation, version 0.4
[    27.404] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    27.404] (II) Loading sub module "ddc"
[    27.404] (II) LoadModule: "ddc"
[    27.404] (II) Module "ddc" already built-in
[    27.404] (II) fglrx(0): Adapter AMD Radeon (TM) R5 M330 has 0 configurable heads and 0 displays connected.
[    27.404] (==) fglrx(0):  PseudoColor visuals disabled
[    27.404] (II) Loading sub module "ramdac"
[    27.404] (II) LoadModule: "ramdac"
[    27.404] (II) Module "ramdac" already built-in
[    27.404] (==) fglrx(0): NoDRI = NO
[    27.404] (==) fglrx(0): Capabilities: 0x00000000
[    27.405] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    27.405] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    27.405] (==) fglrx(0): UseFastTLS=0
[    27.405] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[    27.405] (--) Depth 24 pixmap format is 32 bpp
[    27.405] (II) LoadModule: "glesx"
[    27.405] (II) Loading /usr/lib/xorg/modules/glesx.so
[    27.673] (II) Module glesx: vendor="X.Org Foundation"
[    27.673]    compiled for 1.4.99.906, module version = 1.0.0
[    27.694] (II) fglrx(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
[    27.702] (II) UXA(0): Driver registered support for the following operations:
[    27.702] (II)         solid
[    27.702] (II)         copy
[    27.702] (II)         put_image
[    27.702] (II)         get_image
[    27.703] (II) fglrx(0): [DRI2] Setup complete
[    27.703] (II) fglrx(0): [DRI2]   DRI driver: i965
[    27.703] (II) fglrx(0): [DRI2]   VDPAU driver: i965
[    27.703] (==) fglrx(0): Backing store enabled
[    27.703] (==) fglrx(0): Silken mouse enabled
[    27.703] (II) fglrx(0): Initializing HW Cursor
[    27.703] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.713] (**) fglrx(0): DPMS enabled
[    27.713] (==) fglrx(0): Intel XvMC decoder enabled
[    27.713] (WW) fglrx(0): Disabling Xv because no adaptors could be initialized.
[    27.713] (II) fglrx(0): DRI2: Enabled
[    27.713] (II) fglrx(0): DRI3: Not available
[    27.713] (WW) fglrx(0): Option "VendorName" is not used
[    27.713] (WW) fglrx(0): Option "ModelName" is not used
[    27.713] (WW) fglrx(0): Option "Shadow" is not used
[    27.713] (WW) fglrx(0): Option "Tiling" is not used
[    27.713] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[    27.713] (==) fglrx(0): hotplug detection: "enabled"
[    27.726] (II) fglrx(0): doing swlDriScreenInit
[    27.726] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    27.726] ukiDynamicMajor: found major device number 246
[    27.726] ukiDynamicMajor: found major device number 246
[    27.726] ukiDynamicMajor: found major device number 246
[    27.726] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    27.726] ukiOpenDevice: node name is /dev/ati/card0
[    27.726] ukiOpenDevice: open result is 14, (OK)
[    27.726] ukiOpenByBusid: ukiOpenMinor returns 14
[    27.726] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    27.726] (II) fglrx(0): [uki] DRM interface version 1.0
[    27.726] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    27.726] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    27.726] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f627e014000
[    27.726] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    27.726] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    27.726] (II) fglrx(0): swlDriScreenInit done
[    27.727] (II) fglrx(0): Kernel Module Version Information:
[    27.727] (II) fglrx(0):     Name: fglrx
[    27.727] (II) fglrx(0):     Version: 15.30.3
[    27.727] (II) fglrx(0):     Date: Dec 17 2015
[    27.727] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    27.727] (II) fglrx(0): Kernel Module version matches driver.
[    27.727] (II) fglrx(0): Kernel Module Build Time Information:
[    27.727] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        4.7.0-0.bpo.1-amd64
[    27.727] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    27.727] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    27.727] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    27.727] (II) fglrx(0): [uki] register handle = 0x00004000
[    27.770] (II) fglrx(0): DRI initialization successfull
[    27.770] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000
[    27.774] (II) fglrx(0): Intel display surface mc addr for AMD: ffea737000
[    27.775] (==) fglrx(0): Backing store enabled
[    27.775] (**) fglrx(0): DPMS enabled
[    27.775] (II) fglrx(0): Initialized in-driver Xinerama extension
[    27.775] (**) fglrx(0): Textured Video is enabled.
[    27.775] (II) fglrx(0): GLESX enableFlags = 9040
[    27.775] (II) fglrx(0): GLESX is enabled
[    27.775] (II) LoadModule: "amdxmm"
[    27.776] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    27.792] (II) Module amdxmm: vendor="X.Org Foundation"
[    27.792]    compiled for 1.4.99.906, module version = 2.0.0
[    27.792] (WW) fglrx(0): pXMMDevInfo->hDAL is NULL(WW) fglrx(0):
[    27.792] (WW) fglrx(0): pInitDevInfo->hCPLib is NULL(WW) fglrx(0):
[    27.792] (II) fglrx(0): Enable composite support successfully
[    27.792] (WW) fglrx(0): Option "VendorName" is not used
[    27.792] (WW) fglrx(0): Option "ModelName" is not used
[    27.792] (WW) fglrx(0): Option "Shadow" is not used
[    27.792] (WW) fglrx(0): Option "Tiling" is not used
[    27.792] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[    27.793] (II) fglrx(0): X context handle = 0x1
[    27.793] (II) fglrx(0): [DRI] installation complete
[    27.813] (--) RandR disabled
[    27.820] (II) SELinux: Disabled on system
[    27.821] ukiDynamicMajor: found major device number 246
[    27.821] ukiDynamicMajor: found major device number 246
[    27.821] ukiDynamicMajor: found major device number 246
[    27.821] ukiOpenDevice: node name is /dev/ati/card0
[    27.821] ukiOpenDevice: open result is 15, (OK)
[    27.821] ukiGetBusid returned 'PCI:1:0:0'
[    27.821] ukiOpenDevice: node name is /dev/ati/card1
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card2
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card3
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card4
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card5
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card6
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card7
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card8
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card9
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card10
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card11
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card12
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card13
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card14
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: open result is -1, (No such device)
[    27.821] ukiOpenDevice: Open failed
[    27.821] ukiOpenDevice: node name is /dev/ati/card15
[    27.822] ukiOpenDevice: open result is -1, (No such device)
[    27.822] ukiOpenDevice: open result is -1, (No such device)
[    27.822] ukiOpenDevice: Open failed
[    27.822] ukiDynamicMajor: found major device number 246
[    27.822] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    27.822] ukiOpenDevice: node name is /dev/ati/card0
[    27.822] ukiOpenDevice: open result is 15, (OK)
[    27.822] ukiOpenByBusid: ukiOpenMinor returns 15
[    27.822] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    28.081] ukiDynamicMajor: found major device number 246
[    28.081] ukiDynamicMajor: found major device number 246
[    28.081] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    28.081] ukiOpenDevice: node name is /dev/ati/card0
[    28.081] ukiOpenDevice: open result is 15, (OK)
[    28.081] ukiOpenByBusid: ukiOpenMinor returns 15
[    28.081] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    28.081] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[    28.081] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[    28.081] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[    28.427] ukiDynamicMajor: found major device number 246
[    28.427] ukiDynamicMajor: found major device number 246
[    28.427] ukiDynamicMajor: found major device number 246
[    28.427] ukiOpenDevice: node name is /dev/ati/card0
[    28.427] ukiOpenDevice: open result is 16, (OK)
[    28.427] ukiGetBusid returned 'PCI:1:0:0'
[    28.427] ukiOpenDevice: node name is /dev/ati/card1
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: Open failed
[    28.427] ukiOpenDevice: node name is /dev/ati/card2
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: Open failed
[    28.427] ukiOpenDevice: node name is /dev/ati/card3
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: Open failed
[    28.427] ukiOpenDevice: node name is /dev/ati/card4
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: Open failed
[    28.427] ukiOpenDevice: node name is /dev/ati/card5
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: open result is -1, (No such device)
[    28.427] ukiOpenDevice: Open failed
[    28.427] ukiOpenDevice: node name is /dev/ati/card6
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiOpenDevice: node name is /dev/ati/card7
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiOpenDevice: node name is /dev/ati/card8
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiOpenDevice: node name is /dev/ati/card9
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiOpenDevice: node name is /dev/ati/card10
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiOpenDevice: node name is /dev/ati/card11
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiOpenDevice: node name is /dev/ati/card12
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiOpenDevice: node name is /dev/ati/card13
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiOpenDevice: node name is /dev/ati/card14
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiOpenDevice: node name is /dev/ati/card15
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: open result is -1, (No such device)
[    28.428] ukiOpenDevice: Open failed
[    28.428] ukiDynamicMajor: found major device number 246
[    28.428] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    28.428] ukiOpenDevice: node name is /dev/ati/card0
[    28.428] ukiOpenDevice: open result is 16, (OK)
[    28.428] ukiOpenByBusid: ukiOpenMinor returns 16
[    28.428] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    29.487] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    29.512] (II) fglrx(0): Setting screen physical size to 508 x 285
[    29.938] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    29.938] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.938] (II) LoadModule: "evdev"
[    29.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.972] (II) Module evdev: vendor="X.Org Foundation"
[    29.972]    compiled for 1.16.0, module version = 2.9.0
[    29.972]    Module class: X.Org XInput Driver
[    29.972]    ABI class: X.Org XInput driver, version 21.0
[    29.972] (II) Using input driver 'evdev' for 'Power Button'
[    29.972] (**) Power Button: always reports core events
[    29.972] (**) evdev: Power Button: Device: "/dev/input/event6"
[    29.973] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.973] (--) evdev: Power Button: Found keys
[    29.973] (II) evdev: Power Button: Configuring as keyboard
[    29.973] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[    29.973] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.973] (**) Option "xkb_rules" "evdev"
[    29.973] (**) Option "xkb_model" "pc105"
[    29.973] (**) Option "xkb_layout" "ru,us"
[    29.973] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    30.024] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    30.024] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    30.024] (II) Using input driver 'evdev' for 'Video Bus'
[    30.024] (**) Video Bus: always reports core events
[    30.024] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    30.024] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    30.024] (--) evdev: Video Bus: Found keys
[    30.024] (II) evdev: Video Bus: Configuring as keyboard
[    30.024] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"
[    30.024] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    30.024] (**) Option "xkb_rules" "evdev"
[    30.024] (**) Option "xkb_model" "pc105"
[    30.024] (**) Option "xkb_layout" "ru,us"
[    30.024] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    30.025] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    30.025] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.025] (II) Using input driver 'evdev' for 'Power Button'
[    30.025] (**) Power Button: always reports core events
[    30.025] (**) evdev: Power Button: Device: "/dev/input/event5"
[    30.025] (--) evdev: Power Button: Vendor 0 Product 0x1
[    30.025] (--) evdev: Power Button: Found keys
[    30.025] (II) evdev: Power Button: Configuring as keyboard
[    30.025] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"
[    30.025] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id
[    30.025] (**) Option "xkb_rules" "evdev"
[    30.025] (**) Option "xkb_model" "pc105"
[    30.025] (**) Option "xkb_layout" "ru,us"
[    30.025] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    30.026] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    30.026] (II) No input driver specified, ignoring this device.
[    30.026] (II) This device may have been added with another device file.
[    30.027] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    30.027] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    30.027] (II) Using input driver 'evdev' for 'Sleep Button'
[    30.027] (**) Sleep Button: always reports core events
[    30.027] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    30.027] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    30.027] (--) evdev: Sleep Button: Found keys
[    30.027] (II) evdev: Sleep Button: Configuring as keyboard
[    30.027] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    30.027] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    30.027] (**) Option "xkb_rules" "evdev"
[    30.027] (**) Option "xkb_model" "pc105"
[    30.027] (**) Option "xkb_layout" "ru,us"
[    30.027] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    30.028] (II) config/udev: Adding input device Logitech M325 (/dev/input/event1)
[    30.029] (**) Logitech M325: Applying InputClass "evdev pointer catchall"
[    30.029] (II) Using input driver 'evdev' for 'Logitech M325'
[    30.029] (**) Logitech M325: always reports core events
[    30.029] (**) evdev: Logitech M325: Device: "/dev/input/event1"
[    30.029] (--) evdev: Logitech M325: Vendor 0x46d Product 0x400a
[    30.029] (--) evdev: Logitech M325: Found 20 mouse buttons
[    30.029] (--) evdev: Logitech M325: Found scroll wheel(s)
[    30.029] (--) evdev: Logitech M325: Found relative axes
[    30.029] (--) evdev: Logitech M325: Found x and y relative axes
[    30.029] (II) evdev: Logitech M325: Configuring as mouse
[    30.029] (II) evdev: Logitech M325: Adding scrollwheel support
[    30.029] (**) evdev: Logitech M325: YAxisMapping: buttons 4 and 5
[    30.029] (**) evdev: Logitech M325: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    30.029] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input3/event1"
[    30.029] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 10)
[    30.029] (II) evdev: Logitech M325: initialized for relative axes.
[    30.029] (**) Logitech M325: (accel) keeping acceleration scheme 1
[    30.029] (**) Logitech M325: (accel) acceleration profile 0
[    30.029] (**) Logitech M325: (accel) acceleration factor: 2.000
[    30.029] (**) Logitech M325: (accel) acceleration threshold: 4
[    30.030] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse0)
[    30.030] (II) No input driver specified, ignoring this device.
[    30.030] (II) This device may have been added with another device file.
[    30.030] (II) config/udev: Adding input device EasyCamera (/dev/input/event14)
[    30.030] (**) EasyCamera: Applying InputClass "evdev keyboard catchall"
[    30.030] (II) Using input driver 'evdev' for 'EasyCamera'
[    30.031] (**) EasyCamera: always reports core events
[    30.031] (**) evdev: EasyCamera: Device: "/dev/input/event14"
[    30.031] (--) evdev: EasyCamera: Vendor 0x4f2 Product 0xb57d
[    30.031] (--) evdev: EasyCamera: Found keys
[    30.031] (II) evdev: EasyCamera: Configuring as keyboard
[    30.031] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input15/event14"
[    30.031] (II) XINPUT: Adding extended input device "EasyCamera" (type: KEYBOARD, id 11)
[    30.031] (**) Option "xkb_rules" "evdev"
[    30.031] (**) Option "xkb_model" "pc105"
[    30.031] (**) Option "xkb_layout" "ru,us"
[    30.031] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    30.031] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event7)
[    30.031] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    30.031] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    30.031] (**) Ideapad extra buttons: always reports core events
[    30.031] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event7"
[    30.031] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    30.031] (--) evdev: Ideapad extra buttons: Found keys
[    30.031] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    30.031] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8/event7"
[    30.032] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[    30.032] (**) Option "xkb_rules" "evdev"
[    30.032] (**) Option "xkb_model" "pc105"
[    30.032] (**) Option "xkb_layout" "ru,us"
[    30.032] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    30.032] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    30.032] (II) No input driver specified, ignoring this device.
[    30.032] (II) This device may have been added with another device file.
[    30.032] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    30.032] (II) No input driver specified, ignoring this device.
[    30.032] (II) This device may have been added with another device file.
[    30.033] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    30.033] (II) No input driver specified, ignoring this device.
[    30.033] (II) This device may have been added with another device file.
[    30.033] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[    30.033] (II) No input driver specified, ignoring this device.
[    30.033] (II) This device may have been added with another device file.
[    30.033] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[    30.033] (II) No input driver specified, ignoring this device.
[    30.033] (II) This device may have been added with another device file.
[    30.034] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    30.034] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    30.034] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    30.034] (**) AT Translated Set 2 keyboard: always reports core events
[    30.034] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    30.034] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    30.034] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    30.034] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    30.034] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    30.034] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    30.034] (**) Option "xkb_rules" "evdev"
[    30.034] (**) Option "xkb_model" "pc105"
[    30.034] (**) Option "xkb_layout" "ru,us"
[    30.034] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    30.034] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event2)
[    30.034] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    30.034] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    30.034] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    30.034] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    30.034] (II) LoadModule: "synaptics"
[    30.035] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    30.035] (II) Module synaptics: vendor="X.Org Foundation"
[    30.035]    compiled for 1.16.0.901, module version = 1.8.99
[    30.035]    Module class: X.Org XInput Driver
[    30.035]    ABI class: X.Org XInput driver, version 21.0
[    30.035] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    30.035] (**) ETPS/2 Elantech Touchpad: always reports core events
[    30.035] (**) Option "Device" "/dev/input/event2"
[    30.046] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3082 (res 32)
[    30.046] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1508 (res 32)
[    30.046] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    30.046] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    30.046] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    30.046] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    30.046] (**) Option "VertEdgeScroll" "1"
[    30.046] (**) Option "HorizEdgeScroll" "1"
[    30.046] (**) Option "CornerCoasting" "1"
[    30.046] (**) Option "VertTwoFingerScroll" "1"
[    30.046] (**) Option "HorizTwoFingerScroll" "1"
[    30.046] (**) Option "RBCornerButton" "9"
[    30.046] (**) Option "LBCornerButton" "8"
[    30.046] (**) Option "TapButton1" "1"
[    30.046] (**) Option "TapButton2" "2"
[    30.046] (**) Option "TapButton3" "3"
[    30.046] (**) Option "CircularScrolling" "1"
[    30.046] (**) Option "CircScrollTrigger" "7"
[    30.046] (**) Option "MinSpeed" "0.5"
[    30.046] (**) Option "MaxSpeed" "1.0"
[    30.046] (**) Option "AccelFactor" "0.075"
[    30.046] (**) Option "CoastingSpeed" "8"
[    30.046] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    30.046] (**) ETPS/2 Elantech Touchpad: always reports core events
[    30.058] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    30.058] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    30.058] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.0
[    30.058] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 2.00
[    30.058] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.075
[    30.058] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    30.058] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    30.058] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    30.058] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    30.058] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    30.058] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    30.058] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    30.059] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event15)
[    30.059] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    30.059] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    30.059] (**) ACPI Virtual Keyboard Device: always reports core events
[    30.059] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event15"
[    30.059] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    30.059] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    30.059] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    30.059] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event15"
[    30.059] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15)
[    30.059] (**) Option "xkb_rules" "evdev"
[    30.059] (**) Option "xkb_model" "pc105"
[    30.059] (**) Option "xkb_layout" "ru,us"
[    30.059] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    30.082] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    49.825] (II) fglrx(0): EDID vendor "CMN", prod id 5589
[    49.825] (II) fglrx(0): Printing DDC gathered Modelines:
[    49.825] (II) fglrx(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)
[    64.266] (II) fglrx(0): EDID vendor "CMN", prod id 5589
[    64.266] (II) fglrx(0): Printing DDC gathered Modelines:
[    64.266] (II) fglrx(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)
[    64.446] (II) fglrx(0): EDID vendor "CMN", prod id 5589
[    64.446] (II) fglrx(0): Printing DDC gathered Modelines:
[    64.446] (II) fglrx(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

[свернуть]

и как видно на скрине - карточка найдена. НО - не та. m330, а установлена м430
Gimp работает медленно