Компьютер иногда зависает намертво(РЕШЕНО. Неисправность матплаты.)

[dmitry1903]

Добрый вечер!

Компьютер иногда зависает намертво, не реагирует на Ctrl+Alt+Fn, помогает только кнопка Reset.
При этом курсор не двигается, а если запущен VLC, то бесконечно повторяется кусочек звукового файла.

http://www.gigabyte.ru/products/page/mb/ga-gc230d_10/#sp
ОЗУ 2 Гб.

Devuan GNU/Linux 2.0 (ascii) 32-bit
4.9.0-8-686-pae
Mate 1.16.2

То же происходило, хотя реже, когда на том же компе, но на другом hdd был запущен Debian 7.

Я менял мышь, клавиатуру, память, заменил теплопроводную пасту под радиатором процессора (была подсохшая) и двумя другими радиаторами. На плату дует боковой вентилятор, сзади есть вытяжной вентилятор. BIOS показывает температуру процессора 39-40 градусов.

Возможно, есть какая-то проблема с драйверами:
https://debianforum.ru/index.php?topic=14570.0
Кроме того, что там описано, в некоторых программах не видны некоторые пункты контекстного меню (например, "копировать"), если окно полностью не развернуть.
Но все же, повторяю, под Debian 7 комп тоже зависал.

Что, какие логи посмотреть прежде всего?

[ogost]

В /var/log/ логи messages, dmesg, syslog, Xorg.0.log, в домашней папке .xsession-errors

[dmitry1903]

/var/log/messages

Открыть содержимое (спойлер)

Feb 27 13:21:58 devuan kernel: [    0.000000] Linux version 4.9.0-8-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.130-2 (2018-10-27)
Feb 27 13:21:58 devuan kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Feb 27 13:21:58 devuan kernel: [    0.000000] x86/fpu: Legacy x87 FPU detected.
Feb 27 13:21:58 devuan kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Feb 27 13:21:58 devuan kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
Feb 27 13:21:58 devuan kernel: [    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
Feb 27 13:21:58 devuan kernel: [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Feb 27 13:21:58 devuan kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7effff] usable
Feb 27 13:21:58 devuan kernel: [    0.000000] BIOS-e820: [mem 0x000000007f7f0000-0x000000007f7f2fff] ACPI NVS
Feb 27 13:21:58 devuan kernel: [    0.000000] BIOS-e820: [mem 0x000000007f7f3000-0x000000007f7fffff] ACPI data
Feb 27 13:21:58 devuan kernel: [    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
Feb 27 13:21:58 devuan kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
Feb 27 13:21:58 devuan kernel: [    0.000000] NX (Execute Disable) protection: active
Feb 27 13:21:58 devuan kernel: [    0.000000] SMBIOS 2.4 present.
Feb 27 13:21:58 devuan kernel: [    0.000000] e820: last_pfn = 0x7f7f0 max_arch_pfn = 0x1000000
Feb 27 13:21:58 devuan kernel: [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
Feb 27 13:21:58 devuan kernel: [    0.000000] found SMP MP-table at [mem 0x000f4a50-0x000f4a5f] mapped at [c00f4a50]
Feb 27 13:21:58 devuan kernel: [    0.000000] RAMDISK: [mem 0x35eaf000-0x36f4efff]
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: Early table checksum verification disabled
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: RSDP 0x00000000000F63A0 000014 (v00 GBT   )
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: RSDT 0x000000007F7F3040 000034 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: FACP 0x000000007F7F30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: DSDT 0x000000007F7F3180 0037DE (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: FACS 0x000000007F7F0000 000040
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: HPET 0x000000007F7F6A80 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: MCFG 0x000000007F7F6B00 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: APIC 0x000000007F7F69C0 000068 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Feb 27 13:21:58 devuan kernel: [    0.000000] 1149MB HIGHMEM available.
Feb 27 13:21:58 devuan kernel: [    0.000000] 889MB LOWMEM available.
Feb 27 13:21:58 devuan kernel: [    0.000000]   mapped low ram: 0 - 379fe000
Feb 27 13:21:58 devuan kernel: [    0.000000]   low ram: 0 - 379fe000
Feb 27 13:21:58 devuan kernel: [    0.000000] Zone ranges:
Feb 27 13:21:58 devuan kernel: [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Feb 27 13:21:58 devuan kernel: [    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
Feb 27 13:21:58 devuan kernel: [    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000007f7effff]
Feb 27 13:21:58 devuan kernel: [    0.000000] Movable zone start for each node
Feb 27 13:21:58 devuan kernel: [    0.000000] Early memory node ranges
Feb 27 13:21:58 devuan kernel: [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
Feb 27 13:21:58 devuan kernel: [    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f7effff]
Feb 27 13:21:58 devuan kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f7effff]
Feb 27 13:21:58 devuan kernel: [    0.000000] Using APIC driver default
Feb 27 13:21:58 devuan kernel: [    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Feb 27 13:21:58 devuan kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Feb 27 13:21:58 devuan kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Feb 27 13:21:58 devuan kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Feb 27 13:21:58 devuan kernel: [    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
Feb 27 13:21:58 devuan kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Feb 27 13:21:58 devuan kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Feb 27 13:21:58 devuan kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
Feb 27 13:21:58 devuan kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
Feb 27 13:21:58 devuan kernel: [    0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
Feb 27 13:21:58 devuan kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Feb 27 13:21:58 devuan kernel: [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Feb 27 13:21:58 devuan kernel: [    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
Feb 27 13:21:58 devuan kernel: [    0.000000] percpu: Embedded 20 pages/cpu @f79cf000 s50828 r0 d31092 u81920
Feb 27 13:21:58 devuan kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520123
Feb 27 13:21:58 devuan kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-686-pae root=UUID=581e6c06-3e4a-42c3-8e58-450e49da5df3 ro Advanted options quiet
Feb 27 13:21:58 devuan kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Feb 27 13:21:58 devuan kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 27 13:21:58 devuan kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 27 13:21:58 devuan kernel: [    0.000000] Initializing CPU#0
Feb 27 13:21:58 devuan kernel: [    0.000000] Initializing HighMem for node 0 (000379fe:0007f7f0)
Feb 27 13:21:58 devuan kernel: [    0.000000] Initializing Movable for node 0 (00000000:00000000)
Feb 27 13:21:58 devuan kernel: [    0.000000] Memory: 2040756K/2088504K available (5895K kernel code, 662K rwdata, 1724K rodata, 760K init, 456K bss, 47748K reserved, 0K cma-reserved, 1177544K highmem)
Feb 27 13:21:58 devuan kernel: [    0.000000] virtual kernel memory layout:
Feb 27 13:21:58 devuan kernel: [    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
Feb 27 13:21:58 devuan kernel: [    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
Feb 27 13:21:58 devuan kernel: [    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
Feb 27 13:21:58 devuan kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
Feb 27 13:21:58 devuan kernel: [    0.000000]       .init : 0xca81a000 - 0xca8d8000   ( 760 kB)
Feb 27 13:21:58 devuan kernel: [    0.000000]       .data : 0xca5c22b0 - 0xca818b00   (2394 kB)
Feb 27 13:21:58 devuan kernel: [    0.000000]       .text : 0xca000000 - 0xca5c22b0   (5896 kB)
Feb 27 13:21:58 devuan kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Feb 27 13:21:58 devuan kernel: [    0.000000] Hierarchical RCU implementation.
Feb 27 13:21:58 devuan kernel: [    0.000000]    Build-time adjustment of leaf fanout to 32.
Feb 27 13:21:58 devuan kernel: [    0.000000]    RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
Feb 27 13:21:58 devuan kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
Feb 27 13:21:58 devuan kernel: [    0.000000] NR_IRQS:2304 nr_irqs:440 16
Feb 27 13:21:58 devuan kernel: [    0.000000] Console: colour VGA+ 80x25
Feb 27 13:21:58 devuan kernel: [    0.000000] console [tty0] enabled
Feb 27 13:21:58 devuan kernel: [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Feb 27 13:21:58 devuan kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Feb 27 13:21:58 devuan kernel: [    0.000000] tsc: Detected 1599.994 MHz processor
Feb 27 13:21:58 devuan kernel: [    0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.98 BogoMIPS (lpj=6399976)
Feb 27 13:21:58 devuan kernel: [    0.004028] pid_max: default: 32768 minimum: 301
Feb 27 13:21:58 devuan kernel: [    0.004093] ACPI: Core revision 20160831
Feb 27 13:21:58 devuan kernel: [    0.012063] ACPI: 1 ACPI AML tables successfully acquired and loaded
Feb 27 13:21:58 devuan kernel: [    0.012173] Security Framework initialized
Feb 27 13:21:58 devuan kernel: [    0.012177] Yama: disabled by default; enable with sysctl kernel.yama.*
Feb 27 13:21:58 devuan kernel: [    0.012194] AppArmor: AppArmor disabled by boot time parameter
Feb 27 13:21:58 devuan kernel: [    0.012241] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Feb 27 13:21:58 devuan kernel: [    0.012247] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Feb 27 13:21:58 devuan kernel: [    0.012939] Atom PSE erratum detected, BIOS microcode update recommended
Feb 27 13:21:58 devuan kernel: [    0.012953] mce: CPU supports 5 MCE banks
Feb 27 13:21:58 devuan kernel: [    0.012965] CPU0: Thermal monitoring enabled (TM2)
Feb 27 13:21:58 devuan kernel: [    0.012975] process: using mwait in idle threads
Feb 27 13:21:58 devuan kernel: [    0.012987] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Feb 27 13:21:58 devuan kernel: [    0.012990] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
Feb 27 13:21:58 devuan kernel: [    0.013362] Freeing SMP alternatives memory: 24K
Feb 27 13:21:58 devuan kernel: [    0.016906] ftrace: allocating 24134 entries in 48 pages
Feb 27 13:21:58 devuan kernel: [    0.032225] smpboot: Max logical packages: 2
Feb 27 13:21:58 devuan kernel: [    0.032238] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Feb 27 13:21:58 devuan kernel: [    0.032682] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 27 13:21:58 devuan kernel: [    0.076000] smpboot: CPU0: Intel(R) Atom(TM) CPU  230   @ 1.60GHz (family: 0x6, model: 0x1c, stepping: 0x2)
Feb 27 13:21:58 devuan kernel: [    0.076000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
Feb 27 13:21:58 devuan kernel: [    0.076000] ... version:                3
Feb 27 13:21:58 devuan kernel: [    0.076000] ... bit width:              40
Feb 27 13:21:58 devuan kernel: [    0.076000] ... generic registers:      2
Feb 27 13:21:58 devuan kernel: [    0.076000] ... value mask:             000000ffffffffff
Feb 27 13:21:58 devuan kernel: [    0.076000] ... max period:             000000007fffffff
Feb 27 13:21:58 devuan kernel: [    0.076000] ... fixed-purpose events:   3
Feb 27 13:21:58 devuan kernel: [    0.076000] ... event mask:             0000000700000003
Feb 27 13:21:58 devuan kernel: [    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Feb 27 13:21:58 devuan kernel: [    0.076000] x86: Booting SMP configuration:
Feb 27 13:21:58 devuan kernel: [    0.076000] .... node  #0, CPUs:      #1
Feb 27 13:21:58 devuan kernel: [    0.008000] Initializing CPU#1
Feb 27 13:21:58 devuan kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Feb 27 13:21:58 devuan kernel: [    0.076163] x86: Booted up 1 node, 2 CPUs
Feb 27 13:21:58 devuan kernel: [    0.076163] smpboot: Total of 2 processors activated (6399.97 BogoMIPS)
Feb 27 13:21:58 devuan kernel: [    0.076951] devtmpfs: initialized
Feb 27 13:21:58 devuan kernel: [    0.076951] PM: Registering ACPI NVS region [mem 0x7f7f0000-0x7f7f2fff] (12288 bytes)
Feb 27 13:21:58 devuan kernel: [    0.076951] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Feb 27 13:21:58 devuan kernel: [    0.076951] futex hash table entries: 512 (order: 3, 32768 bytes)
Feb 27 13:21:58 devuan kernel: [    0.076951] pinctrl core: initialized pinctrl subsystem
Feb 27 13:21:58 devuan kernel: [    0.076951] NET: Registered protocol family 16
Feb 27 13:21:58 devuan kernel: [    0.088017] cpuidle: using governor ladder
Feb 27 13:21:58 devuan kernel: [    0.104016] cpuidle: using governor menu
Feb 27 13:21:58 devuan kernel: [    0.104146] ACPI: bus type PCI registered
Feb 27 13:21:58 devuan kernel: [    0.104153] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Feb 27 13:21:58 devuan kernel: [    0.104352] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
Feb 27 13:21:58 devuan kernel: [    0.104358] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
Feb 27 13:21:58 devuan kernel: [    0.104360] PCI: Using MMCONFIG for extended config space
Feb 27 13:21:58 devuan kernel: [    0.104362] PCI: Using configuration type 1 for base access
Feb 27 13:21:58 devuan kernel: [    0.120243] ACPI: Added _OSI(Module Device)
Feb 27 13:21:58 devuan kernel: [    0.120247] ACPI: Added _OSI(Processor Device)
Feb 27 13:21:58 devuan kernel: [    0.120250] ACPI: Added _OSI(3.0 _SCP Extensions)
Feb 27 13:21:58 devuan kernel: [    0.120253] ACPI: Added _OSI(Processor Aggregator Device)
Feb 27 13:21:58 devuan kernel: [    0.128879] ACPI: Interpreter enabled
Feb 27 13:21:58 devuan kernel: [    0.128948] ACPI: (supports S0 S1 S4 S5)
Feb 27 13:21:58 devuan kernel: [    0.128952] ACPI: Using IOAPIC for interrupt routing
Feb 27 13:21:58 devuan kernel: [    0.129046] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Feb 27 13:21:58 devuan kernel: [    0.143789] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
Feb 27 13:21:58 devuan kernel: [    0.143805] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Feb 27 13:21:58 devuan kernel: [    0.143820] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Feb 27 13:21:58 devuan kernel: [    0.144577] PCI host bridge to bus 0000:00
Feb 27 13:21:58 devuan kernel: [    0.144584] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
Feb 27 13:21:58 devuan kernel: [    0.144591] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Feb 27 13:21:58 devuan kernel: [    0.144596] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Feb 27 13:21:58 devuan kernel: [    0.144601] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
Feb 27 13:21:58 devuan kernel: [    0.144606] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfebfffff window]
Feb 27 13:21:58 devuan kernel: [    0.144612] pci_bus 0000:00: root bus resource [bus 00-3f]
Feb 27 13:21:58 devuan kernel: [    0.146026] pci 0000:00:1b.0: System wakeup disabled by ACPI
Feb 27 13:21:58 devuan kernel: [    0.146456] pci 0000:00:1c.0: System wakeup disabled by ACPI
Feb 27 13:21:58 devuan kernel: [    0.146861] pci 0000:00:1d.0: System wakeup disabled by ACPI
Feb 27 13:21:58 devuan kernel: [    0.147261] pci 0000:00:1d.1: System wakeup disabled by ACPI
Feb 27 13:21:58 devuan kernel: [    0.147658] pci 0000:00:1d.2: System wakeup disabled by ACPI
Feb 27 13:21:58 devuan kernel: [    0.148086] pci 0000:00:1d.3: System wakeup disabled by ACPI
Feb 27 13:21:58 devuan kernel: [    0.148523] pci 0000:00:1d.7: System wakeup disabled by ACPI
Feb 27 13:21:58 devuan kernel: [    0.148913] pci 0000:00:1e.0: System wakeup disabled by ACPI
Feb 27 13:21:58 devuan kernel: [    0.149188] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
Feb 27 13:21:58 devuan kernel: [    0.149197] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
Feb 27 13:21:58 devuan kernel: [    0.149204] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
Feb 27 13:21:58 devuan kernel: [    0.149210] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
Feb 27 13:21:58 devuan kernel: [    0.149613] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
Feb 27 13:21:58 devuan kernel: [    0.149618] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
Feb 27 13:21:58 devuan kernel: [    0.149622] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
Feb 27 13:21:58 devuan kernel: [    0.149626] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
Feb 27 13:21:58 devuan kernel: [    0.150820] pci 0000:00:01.0: PCI bridge to [bus 01]
Feb 27 13:21:58 devuan kernel: [    0.151420] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
Feb 27 13:21:58 devuan kernel: [    0.151440] pci 0000:00:1c.0: PCI bridge to [bus 02]
Feb 27 13:21:58 devuan kernel: [    0.151611] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
Feb 27 13:21:58 devuan kernel: [    0.153374] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Feb 27 13:21:58 devuan kernel: [    0.153587] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Feb 27 13:21:58 devuan kernel: [    0.153784] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Feb 27 13:21:58 devuan kernel: [    0.153981] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Feb 27 13:21:58 devuan kernel: [    0.154175] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Feb 27 13:21:58 devuan kernel: [    0.154369] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Feb 27 13:21:58 devuan kernel: [    0.154563] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Feb 27 13:21:58 devuan kernel: [    0.154760] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Feb 27 13:21:58 devuan kernel: [    0.155529] vgaarb: setting as boot device: PCI:0000:00:02.0
Feb 27 13:21:58 devuan kernel: [    0.155529] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Feb 27 13:21:58 devuan kernel: [    0.155529] vgaarb: loaded
Feb 27 13:21:58 devuan kernel: [    0.155529] vgaarb: bridge control possible 0000:00:02.0
Feb 27 13:21:58 devuan kernel: [    0.155529] PCI: Using ACPI for IRQ routing
Feb 27 13:21:58 devuan kernel: [    0.158368] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Feb 27 13:21:58 devuan kernel: [    0.158377] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Feb 27 13:21:58 devuan kernel: [    0.158387] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Feb 27 13:21:58 devuan kernel: [    0.160061] clocksource: Switched to clocksource hpet
Feb 27 13:21:58 devuan kernel: [    0.184801] VFS: Disk quotas dquot_6.6.0
Feb 27 13:21:58 devuan kernel: [    0.184859] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 27 13:21:58 devuan kernel: [    0.184947] hugetlbfs: disabling because there are no supported hugepage sizes
Feb 27 13:21:58 devuan kernel: [    0.185118] pnp: PnP ACPI init
Feb 27 13:21:58 devuan kernel: [    0.185639] system 00:00: [io  0x04d0-0x04d1] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.185646] system 00:00: [io  0x0290-0x029f] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.185652] system 00:00: [io  0x0800-0x087f] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.185658] system 00:00: [io  0x0290-0x0294] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.185663] system 00:00: [io  0x0880-0x088f] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.188168] system 00:06: [io  0x0400-0x04bf] could not be reserved
Feb 27 13:21:58 devuan kernel: [    0.188864] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.189456] system 00:08: [mem 0x000cae00-0x000cbfff] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.189463] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
Feb 27 13:21:58 devuan kernel: [    0.189469] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
Feb 27 13:21:58 devuan kernel: [    0.189474] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
Feb 27 13:21:58 devuan kernel: [    0.189480] system 00:08: [mem 0x7f7f0000-0x7f7fffff] could not be reserved
Feb 27 13:21:58 devuan kernel: [    0.189486] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
Feb 27 13:21:58 devuan kernel: [    0.189491] system 00:08: [mem 0x00100000-0x7f7effff] could not be reserved
Feb 27 13:21:58 devuan kernel: [    0.189497] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
Feb 27 13:21:58 devuan kernel: [    0.189503] system 00:08: [mem 0xfed13000-0xfed1dfff] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.189508] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.189515] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.189521] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.189526] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.189532] system 00:08: [mem 0x000e0000-0x000effff] has been reserved
Feb 27 13:21:58 devuan kernel: [    0.189561] pnp: PnP ACPI: found 9 devices
Feb 27 13:21:58 devuan kernel: [    0.189569] PnPBIOS: Disabled
Feb 27 13:21:58 devuan kernel: [    0.233174] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Feb 27 13:21:58 devuan kernel: [    0.233291] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
Feb 27 13:21:58 devuan kernel: [    0.233297] pci 0000:00:01.0: PCI bridge to [bus 01]
Feb 27 13:21:58 devuan kernel: [    0.233304] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
Feb 27 13:21:58 devuan kernel: [    0.233320] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
Feb 27 13:21:58 devuan kernel: [    0.233325] pci 0000:00:1c.0: PCI bridge to [bus 02]
Feb 27 13:21:58 devuan kernel: [    0.233331] pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
Feb 27 13:21:58 devuan kernel: [    0.233339] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe1ffffff]
Feb 27 13:21:58 devuan kernel: [    0.233346] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
Feb 27 13:21:58 devuan kernel: [    0.233356] pci 0000:00:1e.0: PCI bridge to [bus 03]
Feb 27 13:21:58 devuan kernel: [    0.233361] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
Feb 27 13:21:58 devuan kernel: [    0.233713] NET: Registered protocol family 2
Feb 27 13:21:58 devuan kernel: [    0.234202] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Feb 27 13:21:58 devuan kernel: [    0.234249] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Feb 27 13:21:58 devuan kernel: [    0.234308] TCP: Hash tables configured (established 8192 bind 8192)
Feb 27 13:21:58 devuan kernel: [    0.234403] UDP hash table entries: 512 (order: 2, 16384 bytes)
Feb 27 13:21:58 devuan kernel: [    0.234420] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Feb 27 13:21:58 devuan kernel: [    0.234592] NET: Registered protocol family 1
Feb 27 13:21:58 devuan kernel: [    0.234643] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Feb 27 13:21:58 devuan kernel: [    0.236816] Unpacking initramfs...
Feb 27 13:21:58 devuan kernel: [    1.135487] Freeing initrd memory: 17024K
Feb 27 13:21:58 devuan kernel: [    1.137009] audit: initializing netlink subsys (disabled)
Feb 27 13:21:58 devuan kernel: [    1.137061] audit: type=2000 audit(1551262897.136:1): initialized
Feb 27 13:21:58 devuan kernel: [    1.138230] workingset: timestamp_bits=14 max_order=19 bucket_order=5
Feb 27 13:21:58 devuan kernel: [    1.138299] zbud: loaded
Feb 27 13:21:58 devuan kernel: [    1.140492] bounce: pool size: 64 pages
Feb 27 13:21:58 devuan kernel: [    1.140565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
Feb 27 13:21:58 devuan kernel: [    1.140676] io scheduler noop registered
Feb 27 13:21:58 devuan kernel: [    1.140680] io scheduler deadline registered
Feb 27 13:21:58 devuan kernel: [    1.140741] io scheduler cfq registered (default)
Feb 27 13:21:58 devuan kernel: [    1.141950] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 27 13:21:58 devuan kernel: [    1.141976] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Feb 27 13:21:58 devuan kernel: [    1.142598] GHES: HEST is not enabled!
Feb 27 13:21:58 devuan kernel: [    1.142759] isapnp: Scanning for PnP cards...
Feb 27 13:21:58 devuan kernel: [    1.495891] isapnp: No Plug & Play device found
Feb 27 13:21:58 devuan kernel: [    1.496202] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Feb 27 13:21:58 devuan kernel: [    1.516743] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Feb 27 13:21:58 devuan kernel: [    1.518175] Linux agpgart interface v0.103
Feb 27 13:21:58 devuan kernel: [    1.519449] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 27 13:21:58 devuan kernel: [    1.520101] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 27 13:21:58 devuan kernel: [    1.520120] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 27 13:21:58 devuan kernel: [    1.520722] mousedev: PS/2 mouse device common for all mice
Feb 27 13:21:58 devuan kernel: [    1.520888] rtc_cmos 00:01: RTC can wake from S4
Feb 27 13:21:58 devuan kernel: [    1.521177] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
Feb 27 13:21:58 devuan kernel: [    1.521219] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
Feb 27 13:21:58 devuan kernel: [    1.521303] ledtrig-cpu: registered to indicate activity on CPUs
Feb 27 13:21:58 devuan kernel: [    1.522400] NET: Registered protocol family 10
Feb 27 13:21:58 devuan kernel: [    1.523101] mip6: Mobile IPv6
Feb 27 13:21:58 devuan kernel: [    1.523107] NET: Registered protocol family 17
Feb 27 13:21:58 devuan kernel: [    1.523116] mpls_gso: MPLS GSO support
Feb 27 13:21:58 devuan kernel: [    1.523836] microcode: sig=0x106c2, pf=0x4, revision=0x208
Feb 27 13:21:58 devuan kernel: [    1.523999] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Feb 27 13:21:58 devuan kernel: [    1.524038] Using IPI No-Shortcut mode
Feb 27 13:21:58 devuan kernel: [    1.524611] registered taskstats version 1
Feb 27 13:21:58 devuan kernel: [    1.524655] zswap: loaded using pool lzo/zbud
Feb 27 13:21:58 devuan kernel: [    1.524865] ima: No TPM chip found, activating TPM-bypass!
Feb 27 13:21:58 devuan kernel: [    1.524872] ima: Allocated hash algorithm: sha256
Feb 27 13:21:58 devuan kernel: [    1.525501] rtc_cmos 00:01: setting system clock to 2019-02-27 10:21:38 UTC (1551262898)
Feb 27 13:21:58 devuan kernel: [    1.526357] Freeing unused kernel memory: 760K
Feb 27 13:21:58 devuan kernel: [    1.526724] Write protecting the kernel text: 5900k
Feb 27 13:21:58 devuan kernel: [    1.526848] Write protecting the kernel read-only data: 1728k
Feb 27 13:21:58 devuan kernel: [    1.526851] NX-protecting the kernel data: 4340k
Feb 27 13:21:58 devuan kernel: [    1.534760] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Feb 27 13:21:58 devuan kernel: [    1.549698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Feb 27 13:21:58 devuan kernel: [    1.581585] random: udevd: uninitialized urandom read (16 bytes read)
Feb 27 13:21:58 devuan kernel: [    1.581702] random: udevd: uninitialized urandom read (16 bytes read)
Feb 27 13:21:58 devuan kernel: [    1.644792] random: udevd: uninitialized urandom read (16 bytes read)
Feb 27 13:21:58 devuan kernel: [    1.660567] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Feb 27 13:21:58 devuan kernel: [    1.660600] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
Feb 27 13:21:58 devuan kernel: [    1.662116] r8169 0000:02:00.0 eth0: RTL8101e at 0xf820d000, 00:24:1d:a0:7d:ab, XID 94200000 IRQ 26
Feb 27 13:21:58 devuan kernel: [    1.665891] ACPI: bus type USB registered
Feb 27 13:21:58 devuan kernel: [    1.665992] usbcore: registered new interface driver usbfs
Feb 27 13:21:58 devuan kernel: [    1.666047] usbcore: registered new interface driver hub
Feb 27 13:21:58 devuan kernel: [    1.667658] usbcore: registered new device driver usb
Feb 27 13:21:58 devuan kernel: [    1.670016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Feb 27 13:21:58 devuan kernel: [    1.671641] uhci_hcd: USB Universal Host Controller Interface driver
Feb 27 13:21:58 devuan kernel: [    1.672211] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.672244] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Feb 27 13:21:58 devuan kernel: [    1.672267] uhci_hcd 0000:00:1d.0: detected 2 ports
Feb 27 13:21:58 devuan kernel: [    1.672325] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
Feb 27 13:21:58 devuan kernel: [    1.675917] ehci-pci: EHCI PCI platform driver
Feb 27 13:21:58 devuan kernel: [    1.681423] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Feb 27 13:21:58 devuan kernel: [    1.681432] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 27 13:21:58 devuan kernel: [    1.681438] usb usb1: Product: UHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.681444] usb usb1: Manufacturer: Linux 4.9.0-8-686-pae uhci_hcd
Feb 27 13:21:58 devuan kernel: [    1.681449] usb usb1: SerialNumber: 0000:00:1d.0
Feb 27 13:21:58 devuan kernel: [    1.684076] hub 1-0:1.0: USB hub found
Feb 27 13:21:58 devuan kernel: [    1.685110] hub 1-0:1.0: 2 ports detected
Feb 27 13:21:58 devuan kernel: [    1.689160] ehci-pci 0000:00:1d.7: EHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.689195] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
Feb 27 13:21:58 devuan kernel: [    1.692710] SCSI subsystem initialized
Feb 27 13:21:58 devuan kernel: [    1.693332] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe20c4000
Feb 27 13:21:58 devuan kernel: [    1.708096] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Feb 27 13:21:58 devuan kernel: [    1.708464] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Feb 27 13:21:58 devuan kernel: [    1.708473] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 27 13:21:58 devuan kernel: [    1.708480] usb usb2: Product: EHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.708486] usb usb2: Manufacturer: Linux 4.9.0-8-686-pae ehci_hcd
Feb 27 13:21:58 devuan kernel: [    1.708492] usb usb2: SerialNumber: 0000:00:1d.7
Feb 27 13:21:58 devuan kernel: [    1.709690] hub 2-0:1.0: USB hub found
Feb 27 13:21:58 devuan kernel: [    1.709744] hub 2-0:1.0: 8 ports detected
Feb 27 13:21:58 devuan kernel: [    1.740674] hub 1-0:1.0: USB hub found
Feb 27 13:21:58 devuan kernel: [    1.740717] hub 1-0:1.0: 2 ports detected
Feb 27 13:21:58 devuan kernel: [    1.742160] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.742193] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Feb 27 13:21:58 devuan kernel: [    1.742223] uhci_hcd 0000:00:1d.1: detected 2 ports
Feb 27 13:21:58 devuan kernel: [    1.742303] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
Feb 27 13:21:58 devuan kernel: [    1.742700] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Feb 27 13:21:58 devuan kernel: [    1.742709] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 27 13:21:58 devuan kernel: [    1.742716] usb usb3: Product: UHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.742721] usb usb3: Manufacturer: Linux 4.9.0-8-686-pae uhci_hcd
Feb 27 13:21:58 devuan kernel: [    1.742728] usb usb3: SerialNumber: 0000:00:1d.1
Feb 27 13:21:58 devuan kernel: [    1.744317] hub 3-0:1.0: USB hub found
Feb 27 13:21:58 devuan kernel: [    1.744378] hub 3-0:1.0: 2 ports detected
Feb 27 13:21:58 devuan kernel: [    1.746908] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.746943] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Feb 27 13:21:58 devuan kernel: [    1.746967] uhci_hcd 0000:00:1d.2: detected 2 ports
Feb 27 13:21:58 devuan kernel: [    1.747053] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
Feb 27 13:21:58 devuan kernel: [    1.749249] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Feb 27 13:21:58 devuan kernel: [    1.749258] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 27 13:21:58 devuan kernel: [    1.749264] usb usb4: Product: UHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.749270] usb usb4: Manufacturer: Linux 4.9.0-8-686-pae uhci_hcd
Feb 27 13:21:58 devuan kernel: [    1.749276] usb usb4: SerialNumber: 0000:00:1d.2
Feb 27 13:21:58 devuan kernel: [    1.750853] hub 4-0:1.0: USB hub found
Feb 27 13:21:58 devuan kernel: [    1.750901] hub 4-0:1.0: 2 ports detected
Feb 27 13:21:58 devuan kernel: [    1.751969] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.752085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Feb 27 13:21:58 devuan kernel: [    1.752122] uhci_hcd 0000:00:1d.3: detected 2 ports
Feb 27 13:21:58 devuan kernel: [    1.752208] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
Feb 27 13:21:58 devuan kernel: [    1.752499] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Feb 27 13:21:58 devuan kernel: [    1.752507] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 27 13:21:58 devuan kernel: [    1.752514] usb usb5: Product: UHCI Host Controller
Feb 27 13:21:58 devuan kernel: [    1.752519] usb usb5: Manufacturer: Linux 4.9.0-8-686-pae uhci_hcd
Feb 27 13:21:58 devuan kernel: [    1.752524] usb usb5: SerialNumber: 0000:00:1d.3
Feb 27 13:21:58 devuan kernel: [    1.754043] hub 5-0:1.0: USB hub found
Feb 27 13:21:58 devuan kernel: [    1.754684] hub 5-0:1.0: 2 ports detected
Feb 27 13:21:58 devuan kernel: [    1.757313] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
Feb 27 13:21:58 devuan kernel: [    1.765644] scsi host0: ata_piix
Feb 27 13:21:58 devuan kernel: [    1.766112] scsi host1: ata_piix
Feb 27 13:21:58 devuan kernel: [    1.766343] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
Feb 27 13:21:58 devuan kernel: [    1.766347] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Feb 27 13:21:58 devuan kernel: [    1.766727] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Feb 27 13:21:58 devuan kernel: [    1.770384] scsi host2: ata_piix
Feb 27 13:21:58 devuan kernel: [    1.771023] scsi host3: ata_piix
Feb 27 13:21:58 devuan kernel: [    1.771412] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xe400 irq 19
Feb 27 13:21:58 devuan kernel: [    1.771447] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xe408 irq 19
Feb 27 13:21:58 devuan kernel: [    1.976424] ata1.00: ATAPI: TOSHIBA CD/DVDW SDR5372V, TU11, max UDMA/33
Feb 27 13:21:58 devuan kernel: [    1.976569] ata1.01: HPA detected: current 39177839, native 39179952
Feb 27 13:21:58 devuan kernel: [    1.976575] ata1.01: ATA-7: SAMSUNG SV0221N, UA100-07, max UDMA/133
Feb 27 13:21:58 devuan kernel: [    1.976579] ata1.01: 39177839 sectors, multi 16: LBA48
Feb 27 13:21:58 devuan kernel: [    2.000301] ata1.00: configured for UDMA/33
Feb 27 13:21:58 devuan kernel: [    2.002970] ata1.01: configured for UDMA/100
Feb 27 13:21:58 devuan kernel: [    2.007876] scsi 0:0:0:0: CD-ROM            TOSHIBA  CD/DVDW SDR5372V TU11 PQ: 0 ANSI: 5
Feb 27 13:21:58 devuan kernel: [    2.022394] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SV0221N  0-07 PQ: 0 ANSI: 5
Feb 27 13:21:58 devuan kernel: [    2.065021] sd 0:0:1:0: [sda] 39177839 512-byte logical blocks: (20.1 GB/18.7 GiB)
Feb 27 13:21:58 devuan kernel: [    2.065292] sd 0:0:1:0: [sda] Write Protect is off
Feb 27 13:21:58 devuan kernel: [    2.065438] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 27 13:21:58 devuan kernel: [    2.079409] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Feb 27 13:21:58 devuan kernel: [    2.079417] cdrom: Uniform CD-ROM driver Revision: 3.20
Feb 27 13:21:58 devuan kernel: [    2.082614] sr 0:0:0:0: Attached scsi generic sg0 type 5
Feb 27 13:21:58 devuan kernel: [    2.082912] sd 0:0:1:0: Attached scsi generic sg1 type 0
Feb 27 13:21:58 devuan kernel: [    2.096191] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input2
Feb 27 13:21:58 devuan kernel: [    2.148063] tsc: Refined TSC clocksource calibration: 1599.980 MHz
Feb 27 13:21:58 devuan kernel: [    2.148079] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17101205016, max_idle_ns: 440795202977 ns
Feb 27 13:21:58 devuan kernel: [    2.181652]  sda: sda1 sda2 < sda5 >
Feb 27 13:21:58 devuan kernel: [    2.201616] sd 0:0:1:0: [sda] Attached SCSI disk
Feb 27 13:21:58 devuan kernel: [    2.346057] random: fast init done
Feb 27 13:21:58 devuan kernel: [    2.875105] PM: Starting manual resume from disk
Feb 27 13:21:58 devuan kernel: [    3.168216] clocksource: Switched to clocksource tsc
Feb 27 13:21:58 devuan kernel: [    5.932903] random: crng init done
Feb 27 13:21:58 devuan kernel: [    6.371537] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Feb 27 13:21:58 devuan kernel: [   10.997473] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
Feb 27 13:21:58 devuan kernel: [   10.997486] ACPI: Power Button [PWRB]
Feb 27 13:21:58 devuan kernel: [   10.997857] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Feb 27 13:21:58 devuan kernel: [   10.997867] ACPI: Power Button [PWRF]
Feb 27 13:21:58 devuan kernel: [   11.105404] parport_pc 00:03: reported by Plug and Play ACPI
Feb 27 13:21:58 devuan kernel: [   11.105587] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Feb 27 13:21:58 devuan kernel: [   11.348775] input: PC Speaker as /devices/platform/pcspkr/input/input5
Feb 27 13:21:58 devuan kernel: [   11.364149] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 27 13:21:58 devuan kernel: [   11.392305] intel_rng: FWH not detected
Feb 27 13:21:58 devuan kernel: [   11.517078] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160831/utaddress-247)
Feb 27 13:21:58 devuan kernel: [   11.517101] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Feb 27 13:21:58 devuan kernel: [   11.517127] intel_powerclamp: No package C-state available
Feb 27 13:21:58 devuan kernel: [   11.517271] lpc_ich: Resource conflict(s) found affecting gpio_ich
Feb 27 13:21:58 devuan kernel: [   11.581960] leds_ss4200: no LED devices found
Feb 27 13:21:58 devuan kernel: [   11.858237] ppdev: user-space parallel port driver
Feb 27 13:21:58 devuan kernel: [   12.170296] iTCO_vendor_support: vendor-support=0
Feb 27 13:21:58 devuan kernel: [   12.171595] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Feb 27 13:21:58 devuan kernel: [   12.171712] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
Feb 27 13:21:58 devuan kernel: [   12.172273] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Feb 27 13:21:58 devuan kernel: [   12.551891] [drm] Initialized
Feb 27 13:21:58 devuan kernel: [   12.764093] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
Feb 27 13:21:58 devuan kernel: [   12.764103] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Feb 27 13:21:58 devuan kernel: [   12.764110] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Feb 27 13:21:58 devuan kernel: [   12.764116] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
Feb 27 13:21:58 devuan kernel: [   12.764120] snd_hda_codec_realtek hdaudioC0D2:    inputs:
Feb 27 13:21:58 devuan kernel: [   12.764128] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
Feb 27 13:21:58 devuan kernel: [   12.764135] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
Feb 27 13:21:58 devuan kernel: [   12.764142] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
Feb 27 13:21:58 devuan kernel: [   12.784559] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
Feb 27 13:21:58 devuan kernel: [   12.786189] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Feb 27 13:21:58 devuan kernel: [   12.786701] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Feb 27 13:21:58 devuan kernel: [   12.787202] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Feb 27 13:21:58 devuan kernel: [   12.787945] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Feb 27 13:21:58 devuan kernel: [   12.796665] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Feb 27 13:21:58 devuan kernel: [   13.666873] pci 0000:00:00.0: Intel 945G Chipset
Feb 27 13:21:58 devuan kernel: [   13.666907] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
Feb 27 13:21:58 devuan kernel: [   13.667004] pci 0000:00:00.0: detected 8192K stolen memory
Feb 27 13:21:58 devuan kernel: [   13.667067] [drm] Memory usable by graphics device = 256M
Feb 27 13:21:58 devuan kernel: [   13.667074] [drm] Replacing VGA console driver
Feb 27 13:21:58 devuan kernel: [   13.668185] Console: switching to colour dummy device 80x25
Feb 27 13:21:58 devuan kernel: [   13.668359] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Feb 27 13:21:58 devuan kernel: [   13.668364] [drm] Driver supports precise vblank timestamp query.
Feb 27 13:21:58 devuan kernel: [   13.669595] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Feb 27 13:21:58 devuan kernel: [   13.701352] [drm] RC6 disabled, disabling runtime PM support
Feb 27 13:21:58 devuan kernel: [   13.701421] [drm] initialized overlay support
Feb 27 13:21:58 devuan kernel: [   13.737597] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
Feb 27 13:21:58 devuan kernel: [   13.911506] fbcon: inteldrmfb (fb0) is primary device
Feb 27 13:21:58 devuan kernel: [   13.973461] Console: switching to colour frame buffer device 160x64
Feb 27 13:21:58 devuan kernel: [   14.010205] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Feb 27 13:21:58 devuan kernel: [   14.240097] r8169 0000:02:00.0 eth0: link down
Feb 27 13:21:58 devuan kernel: [   14.240118] r8169 0000:02:00.0 eth0: link down
Feb 27 13:21:58 devuan kernel: [   14.240242] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Feb 27 13:21:58 devuan kernel: [   15.769303] r8169 0000:02:00.0 eth0: link up
Feb 27 13:21:58 devuan kernel: [   15.769327] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Feb 27 13:21:58 devuan kernel: [   19.300252] Adding 1035260k swap on /dev/sda5.  Priority:-1 extents:1 across:1035260k FS
Feb 27 13:21:58 devuan kernel: [   19.425088] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Feb 27 13:21:58 devuan kernel: [   20.360227] lp0: using parport0 (interrupt-driven).
Feb 27 13:25:06 devuan kernel: [  210.243541] perf: interrupt took too long (2574 > 2500), lowering kernel.perf_event_max_sample_rate to 77500
Feb 27 13:25:24 devuan kernel: [  228.614569] perf: interrupt took too long (3263 > 3217), lowering kernel.perf_event_max_sample_rate to 61250
Feb 27 13:25:55 devuan kernel: [  259.795503] perf: interrupt took too long (4135 > 4078), lowering kernel.perf_event_max_sample_rate to 48250
Feb 27 13:27:16 devuan kernel: [  340.896509] perf: interrupt took too long (5173 > 5168), lowering kernel.perf_event_max_sample_rate to 38500
Feb 27 13:29:56 devuan kernel: [  500.917036] perf: interrupt took too long (6496 > 6466), lowering kernel.perf_event_max_sample_rate to 30750
Feb 27 13:32:39 devuan kernel: [  663.057165] perf: interrupt took too long (8151 > 8120), lowering kernel.perf_event_max_sample_rate to 24500
Feb 27 13:43:06 devuan kernel: [ 1290.295707] perf: interrupt took too long (10204 > 10188), lowering kernel.perf_event_max_sample_rate to 19500
Feb 27 13:59:31 devuan shutdown[2731]: shutting down for system reboot

[свернуть]

[dmitry1903]

/var/log/dmesg

Открыть содержимое (спойлер)

[    0.000000] Linux version 4.9.0-8-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.130-2 (2018-10-27)
[    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f7f0000-0x000000007f7f2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f7f3000-0x000000007f7fffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GC230D/GC230D, BIOS F1 05/22/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f7f0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C9FFF write-protect
[    0.000000]   CA000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] found SMP MP-table at [mem 0x000f4a50-0x000f4a5f] mapped at [c00f4a50]
[    0.000000] initial memory mapped: [mem 0x00000000-0x09dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x099a0000, 0x099a0fff] PGTABLE
[    0.000000] BRK [0x099a1000, 0x099a1fff] PGTABLE
[    0.000000] BRK [0x099a2000, 0x099a2fff] PGTABLE
[    0.000000] BRK [0x099a3000, 0x099a3fff] PGTABLE
[    0.000000] BRK [0x099a4000, 0x099a4fff] PGTABLE
[    0.000000] BRK [0x099a5000, 0x099a5fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35eaf000-0x36f4efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F63A0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x000000007F7F3040 000034 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x000000007F7F30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x000000007F7F3180 0037DE (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x000000007F7F0000 000040
[    0.000000] ACPI: HPET 0x000000007F7F6A80 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x000000007F7F6B00 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 0x000000007F7F69C0 000068 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1149MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000007f7effff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f7effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f7effff]
[    0.000000] On node 0 totalpages: 522126
[    0.000000] free_area_init_node: node 0, pgdat c97fd880, node_mem_map f4cc1024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 294386 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu @f79cf000 s50828 r0 d31092 u81920
[    0.000000] pcpu-alloc: s50828 r0 d31092 u81920 alloc=20*4096
[    0.000000] pcpu-alloc:

• 0
• 1
  [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520123
  [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-686-pae root=UUID=581e6c06-3e4a-42c3-8e58-450e49da5df3 ro Advanted options quiet
  [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  [    0.000000] Initializing CPU#0
  [    0.000000] Initializing HighMem for node 0 (000379fe:0007f7f0)
  [    0.000000] Initializing Movable for node 0 (00000000:00000000)
  [    0.000000] Memory: 2040756K/2088504K available (5895K kernel code, 662K rwdata, 1724K rodata, 760K init, 456K bss, 47748K reserved, 0K cma-reserved, 1177544K highmem)
  [    0.000000] virtual kernel memory layout:
                     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                       .init : 0xc981a000 - 0xc98d8000   ( 760 kB)
                       .data : 0xc95c22b0 - 0xc9818b00   (2394 kB)
                       .text : 0xc9000000 - 0xc95c22b0   (5896 kB)
  [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  [    0.000000] Hierarchical RCU implementation.
  [    0.000000]    Build-time adjustment of leaf fanout to 32.
  [    0.000000]    RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
  [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  [    0.000000] NR_IRQS:2304 nr_irqs:440 16
  [    0.000000] CPU 0 irqstacks, hard=f702e000 soft=f7030000
  [    0.000000] Console: colour VGA+ 80x25
  [    0.000000] console [tty0] enabled
  [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  [    0.000000] hpet clockevent registered
  [    0.000000] tsc: Fast TSC calibration using PIT
  [    0.000000] tsc: Detected 1599.965 MHz processor
  [    0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.93 BogoMIPS (lpj=6399860)
  [    0.004030] pid_max: default: 32768 minimum: 301
  [    0.004093] ACPI: Core revision 20160831
  [    0.012265] ACPI: 1 ACPI AML tables successfully acquired and loaded
  [    0.012375] Security Framework initialized
  [    0.012379] Yama: disabled by default; enable with sysctl kernel.yama.*
  [    0.012395] AppArmor: AppArmor disabled by boot time parameter
  [    0.012443] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  [    0.012450] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  [    0.013137] Atom PSE erratum detected, BIOS microcode update recommended
  [    0.013152] mce: CPU supports 5 MCE banks
  [    0.013163] CPU0: Thermal monitoring enabled (TM2)
  [    0.013171] process: using mwait in idle threads
  [    0.013185] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
  [    0.013189] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
  [    0.013557] Freeing SMP alternatives memory: 24K
  [    0.017103] ftrace: allocating 24134 entries in 48 pages
  [    0.032224] smpboot: Max logical packages: 2
  [    0.032238] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  [    0.032681] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  [    0.076000] smpboot: CPU0: Intel(R) Atom(TM) CPU  230   @ 1.60GHz (family: 0x6, model: 0x1c, stepping: 0x2)
  [    0.076000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
  [    0.076000] ... version:                3
  [    0.076000] ... bit width:              40
  [    0.076000] ... generic registers:      2
  [    0.076000] ... value mask:             000000ffffffffff
  [    0.076000] ... max period:             000000007fffffff
  [    0.076000] ... fixed-purpose events:   3
  [    0.076000] ... event mask:             0000000700000003
  [    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  [    0.076000] CPU 1 irqstacks, hard=f7180000 soft=f7182000
  [    0.076000] x86: Booting SMP configuration:
  [    0.076000] .... node  #0, CPUs:      #1
  [    0.008000] Initializing CPU#1
  [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
  [    0.076164] x86: Booted up 1 node, 2 CPUs
  [    0.076164] smpboot: Total of 2 processors activated (6399.86 BogoMIPS)
  [    0.076957] devtmpfs: initialized
  [    0.076957] PM: Registering ACPI NVS region [mem 0x7f7f0000-0x7f7f2fff] (12288 bytes)
  [    0.076957] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  [    0.076957] futex hash table entries: 512 (order: 3, 32768 bytes)
  [    0.076957] pinctrl core: initialized pinctrl subsystem
  [    0.076957] NET: Registered protocol family 16
  [    0.088017] cpuidle: using governor ladder
  [    0.104016] cpuidle: using governor menu
  [    0.104146] ACPI: bus type PCI registered
  [    0.104152] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  [    0.104353] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
  [    0.104359] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
  [    0.104361] PCI: Using MMCONFIG for extended config space
  [    0.104363] PCI: Using configuration type 1 for base access
  [    0.120241] ACPI: Added _OSI(Module Device)
  [    0.120246] ACPI: Added _OSI(Processor Device)
  [    0.120248] ACPI: Added _OSI(3.0 _SCP Extensions)
  [    0.120251] ACPI: Added _OSI(Processor Aggregator Device)
  [    0.128878] ACPI: Interpreter enabled
  [    0.128947] ACPI: (supports S0 S1 S4 S5)
  [    0.128951] ACPI: Using IOAPIC for interrupt routing
  [    0.129044] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  [    0.143786] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
  [    0.143802] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  [    0.143817] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  [    0.144573] PCI host bridge to bus 0000:00
  [    0.144581] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
  [    0.144587] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
  [    0.144592] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  [    0.144597] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
  [    0.144602] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfebfffff window]
  [    0.144608] pci_bus 0000:00: root bus resource [bus 00-3f]
  [    0.144634] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
  [    0.144963] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
  [    0.145043] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  [    0.145337] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
  [    0.145356] pci 0000:00:02.0: reg 0x10: [mem 0xe2000000-0xe207ffff]
  [    0.145366] pci 0000:00:02.0: reg 0x14: [io  0xb000-0xb007]
  [    0.145376] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
  [    0.145386] pci 0000:00:02.0: reg 0x1c: [mem 0xe2080000-0xe20bffff]
  [    0.145723] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
  [    0.145749] pci 0000:00:1b.0: reg 0x10: [mem 0xe20c0000-0xe20c3fff 64bit]
  [    0.145850] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  [    0.146020] pci 0000:00:1b.0: System wakeup disabled by ACPI
  [    0.146187] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
  [    0.146292] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  [    0.146451] pci 0000:00:1c.0: System wakeup disabled by ACPI
  [    0.146624] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
  [    0.146677] pci 0000:00:1d.0: reg 0x20: [io  0xb400-0xb41f]
  [    0.146857] pci 0000:00:1d.0: System wakeup disabled by ACPI
  [    0.147025] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
  [    0.147078] pci 0000:00:1d.1: reg 0x20: [io  0xb800-0xb81f]
  [    0.147258] pci 0000:00:1d.1: System wakeup disabled by ACPI
  [    0.147423] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
  [    0.147476] pci 0000:00:1d.2: reg 0x20: [io  0xbc00-0xbc1f]
  [    0.147656] pci 0000:00:1d.2: System wakeup disabled by ACPI
  [    0.147822] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
  [    0.147875] pci 0000:00:1d.3: reg 0x20: [io  0xc000-0xc01f]
  [    0.148082] pci 0000:00:1d.3: System wakeup disabled by ACPI
  [    0.148250] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
  [    0.148274] pci 0000:00:1d.7: reg 0x10: [mem 0xe20c4000-0xe20c43ff]
  [    0.148516] pci 0000:00:1d.7: System wakeup disabled by ACPI
  [    0.148695] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
  [    0.148906] pci 0000:00:1e.0: System wakeup disabled by ACPI
  [    0.149076] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
  [    0.149182] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
  [    0.149191] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
  [    0.149198] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
  [    0.149204] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
  [    0.149510] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
  [    0.149531] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
  [    0.149544] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
  [    0.149557] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
  [    0.149570] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
  [    0.149583] pci 0000:00:1f.1: reg 0x20: [io  0xf000-0xf00f]
  [    0.149609] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
  [    0.149613] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
  [    0.149617] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
  [    0.149621] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
  [    0.149908] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
  [    0.149928] pci 0000:00:1f.2: reg 0x10: [io  0xd400-0xd407]
  [    0.149941] pci 0000:00:1f.2: reg 0x14: [io  0xd800-0xd803]
  [    0.149953] pci 0000:00:1f.2: reg 0x18: [io  0xdc00-0xdc07]
  [    0.149964] pci 0000:00:1f.2: reg 0x1c: [io  0xe000-0xe003]
  [    0.149976] pci 0000:00:1f.2: reg 0x20: [io  0xe400-0xe40f]
  [    0.150032] pci 0000:00:1f.2: PME# supported from D3hot
  [    0.150336] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
  [    0.150400] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
  [    0.150814] pci 0000:00:01.0: PCI bridge to [bus 01]
  [    0.150821] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
  [    0.150971] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
  [    0.151002] pci 0000:02:00.0: reg 0x10: [io  0xa000-0xa0ff]
  [    0.151041] pci 0000:02:00.0: reg 0x18: [mem 0xe1000000-0xe1000fff 64bit]
  [    0.151085] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
  [    0.151205] pci 0000:02:00.0: supports D1 D2
  [    0.151210] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
  [    0.151413] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
  [    0.151433] pci 0000:00:1c.0: PCI bridge to [bus 02]
  [    0.151440] pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
  [    0.151447] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe1ffffff]
  [    0.151604] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
  [    0.151612] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
  [    0.151624] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
  [    0.151629] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
  [    0.151634] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
  [    0.151639] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
  [    0.151644] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0xfebfffff window] (subtractive decode)
  [    0.151666] pci_bus 0000:00: on NUMA node 0
  [    0.153373] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
  [    0.153586] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  [    0.153783] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
  [    0.153978] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
  [    0.154171] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  [    0.154366] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  [    0.154561] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  [    0.154759] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
  [    0.155524] vgaarb: setting as boot device: PCI:0000:00:02.0
  [    0.155524] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  [    0.155524] vgaarb: loaded
  [    0.155524] vgaarb: bridge control possible 0000:00:02.0
  [    0.155524] PCI: Using ACPI for IRQ routing
  [    0.157638] PCI: pci_cache_line_size set to 64 bytes
  [    0.157707] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
  [    0.157713] e820: reserve RAM buffer [mem 0x7f7f0000-0x7fffffff]
  [    0.158234] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  [    0.158234] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  [    0.158234] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  [    0.160070] clocksource: Switched to clocksource hpet
  [    0.184936] VFS: Disk quotas dquot_6.6.0
  [    0.184996] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  [    0.185074] hugetlbfs: disabling because there are no supported hugepage sizes
  [    0.185247] pnp: PnP ACPI init
  [    0.185757] system 00:00: [io  0x04d0-0x04d1] has been reserved
  [    0.185764] system 00:00: [io  0x0290-0x029f] has been reserved
  [    0.185770] system 00:00: [io  0x0800-0x087f] has been reserved
  [    0.185775] system 00:00: [io  0x0290-0x0294] has been reserved
  [    0.185781] system 00:00: [io  0x0880-0x088f] has been reserved
  [    0.185794] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.186041] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
  [    0.186843] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
  [    0.187495] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
  [    0.187864] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
  [    0.188078] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
  [    0.188311] system 00:06: [io  0x0400-0x04bf] could not be reserved
  [    0.188322] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.189003] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
  [    0.189013] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.189606] system 00:08: [mem 0x000cae00-0x000cbfff] has been reserved
  [    0.189613] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
  [    0.189619] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
  [    0.189624] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
  [    0.189630] system 00:08: [mem 0x7f7f0000-0x7f7fffff] could not be reserved
  [    0.189636] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
  [    0.189641] system 00:08: [mem 0x00100000-0x7f7effff] could not be reserved
  [    0.189647] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
  [    0.189653] system 00:08: [mem 0xfed13000-0xfed1dfff] has been reserved
  [    0.189658] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
  [    0.189664] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
  [    0.189669] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
  [    0.189675] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
  [    0.189680] system 00:08: [mem 0x000e0000-0x000effff] has been reserved
  [    0.189690] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
  [    0.189709] pnp: PnP ACPI: found 9 devices
  [    0.189717] PnPBIOS: Disabled
  [    0.233308] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  [    0.233360] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
  [    0.233388] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
  [    0.233394] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
  [    0.233415] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
  [    0.233422] pci 0000:00:01.0: PCI bridge to [bus 01]
  [    0.233428] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
  [    0.233446] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
  [    0.233451] pci 0000:00:1c.0: PCI bridge to [bus 02]
  [    0.233456] pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
  [    0.233464] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe1ffffff]
  [    0.233471] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
  [    0.233481] pci 0000:00:1e.0: PCI bridge to [bus 03]
  [    0.233486] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
  [    0.233503] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
  [    0.233508] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
  [    0.233513] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  [    0.233518] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
  [    0.233523] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xfebfffff window]
  [    0.233527] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
  [    0.233532] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
  [    0.233537] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe1ffffff]
  [    0.233542] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
  [    0.233546] pci_bus 0000:03: resource 0 [io  0x8000-0x8fff]
  [    0.233551] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
  [    0.233556] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
  [    0.233560] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
  [    0.233565] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
  [    0.233570] pci_bus 0000:03: resource 8 [mem 0x7f800000-0xfebfffff window]
  [    0.233848] NET: Registered protocol family 2
  [    0.234332] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  [    0.234379] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  [    0.234437] TCP: Hash tables configured (established 8192 bind 8192)
  [    0.234533] UDP hash table entries: 512 (order: 2, 16384 bytes)
  [    0.234551] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  [    0.234717] NET: Registered protocol family 1
  [    0.234767] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  [    0.236763] PCI: CLS 32 bytes, default 64
  [    0.236939] Unpacking initramfs...
  [    1.134618] Freeing initrd memory: 17024K
  [    1.136145] audit: initializing netlink subsys (disabled)
  [    1.136196] audit: type=2000 audit(1551333356.136:1): initialized
  [    1.137368] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  [    1.137437] zbud: loaded
  [    1.139553] bounce: pool size: 64 pages
  [    1.139626] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  [    1.139736] io scheduler noop registered
  [    1.139740] io scheduler deadline registered
  [    1.139793] io scheduler cfq registered (default)
  [    1.141052] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  [    1.141078] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  [    1.141145] intel_idle: MWAIT substates: 0x10
  [    1.141149] intel_idle: v0.4.1 model 0x1C
  [    1.141307] intel_idle: lapic_timer_reliable_states 0x2
  [    1.141691] GHES: HEST is not enabled!
  [    1.141848] isapnp: Scanning for PnP cards...
  [    1.495002] isapnp: No Plug & Play device found
  [    1.495288] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  [    1.515839] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  [    1.517288] Linux agpgart interface v0.103
  [    1.518568] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  [    1.519181] serio: i8042 KBD port at 0x60,0x64 irq 1
  [    1.519198] serio: i8042 AUX port at 0x60,0x64 irq 12
  [    1.519803] mousedev: PS/2 mouse device common for all mice
  [    1.519964] rtc_cmos 00:01: RTC can wake from S4
  [    1.520300] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
  [    1.520343] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
  [    1.520428] ledtrig-cpu: registered to indicate activity on CPUs
  [    1.521522] NET: Registered protocol family 10
  [    1.522200] mip6: Mobile IPv6
  [    1.522207] NET: Registered protocol family 17
  [    1.522217] mpls_gso: MPLS GSO support
  [    1.522928] microcode: sig=0x106c2, pf=0x4, revision=0x208
  [    1.523097] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  [    1.523108] Using IPI No-Shortcut mode
  [    1.523676] registered taskstats version 1
  [    1.523719] zswap: loaded using pool lzo/zbud
  [    1.523929] ima: No TPM chip found, activating TPM-bypass!
  [    1.523937] ima: Allocated hash algorithm: sha256
  [    1.524628] rtc_cmos 00:01: setting system clock to 2019-02-28 05:55:57 UTC (1551333357)
  [    1.524760] PM: Hibernation image not present or could not be loaded.
  [    1.525471] Freeing unused kernel memory: 760K
  [    1.525836] Write protecting the kernel text: 5900k
  [    1.525958] Write protecting the kernel read-only data: 1728k
  [    1.525961] NX-protecting the kernel data: 4340k
  [    1.533907] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  [    1.548732] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  [    1.580212] udevd[69]: starting version 3.2.2
  [    1.580984] random: udevd: uninitialized urandom read (16 bytes read)
  [    1.581100] random: udevd: uninitialized urandom read (16 bytes read)
  [    1.583777] udevd[70]: starting eudev-3.2.2
  [    1.641295] random: udevd: uninitialized urandom read (16 bytes read)
  [    1.663037] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  [    1.663074] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
  [    1.667803] r8169 0000:02:00.0 eth0: RTL8101e at 0xf8273000, 00:24:1d:a0:7d:ab, XID 94200000 IRQ 26
  [    1.667854] ACPI: bus type USB registered
  [    1.668085] usbcore: registered new interface driver usbfs
  [    1.668173] usbcore: registered new interface driver hub
  [    1.676293] usbcore: registered new device driver usb
  [    1.678878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  [    1.681199] ehci-pci: EHCI PCI platform driver
  [    1.681740] ehci-pci 0000:00:1d.7: EHCI Host Controller
  [    1.681776] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
  [    1.682901] uhci_hcd: USB Universal Host Controller Interface driver
  [    1.685779] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
  [    1.685866] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe20c4000
  [    1.686155] SCSI subsystem initialized
  [    1.694309] libata version 3.00 loaded.
  [    1.700142] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  [    1.700479] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  [    1.700487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    1.700492] usb usb1: Product: EHCI Host Controller
  [    1.700497] usb usb1: Manufacturer: Linux 4.9.0-8-686-pae ehci_hcd
  [    1.700503] usb usb1: SerialNumber: 0000:00:1d.7
  [    1.701346] hub 1-0:1.0: USB hub found
  [    1.701395] hub 1-0:1.0: 8 ports detected
  [    1.703394] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  [    1.703435] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  [    1.703458] uhci_hcd 0000:00:1d.0: detected 2 ports
  [    1.703494] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
  [    1.703712] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  [    1.703717] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    1.703721] usb usb2: Product: UHCI Host Controller
  [    1.703725] usb usb2: Manufacturer: Linux 4.9.0-8-686-pae uhci_hcd
  [    1.703729] usb usb2: SerialNumber: 0000:00:1d.0
  [    1.704381] hub 2-0:1.0: USB hub found
  [    1.704407] hub 2-0:1.0: 2 ports detected
  [    1.705254] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  [    1.705309] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  [    1.705412] uhci_hcd 0000:00:1d.1: detected 2 ports
  [    1.705491] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
  [    1.705783] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  [    1.705791] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    1.705798] usb usb3: Product: UHCI Host Controller
  [    1.705803] usb usb3: Manufacturer: Linux 4.9.0-8-686-pae uhci_hcd
  [    1.705809] usb usb3: SerialNumber: 0000:00:1d.1
  [    1.707435] hub 3-0:1.0: USB hub found
  [    1.707496] hub 3-0:1.0: 2 ports detected
  [    1.708874] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  [    1.711807] ata_piix 0000:00:1f.1: version 2.13
  [    1.718157] scsi host0: ata_piix
  [    1.732568] scsi host1: ata_piix
  [    1.732980] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
  [    1.732987] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
  [    1.733380] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  [    1.739549] scsi host2: ata_piix
  [    1.744166] scsi host3: ata_piix
  [    1.744588] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xe400 irq 19
  [    1.744596] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xe408 irq 19
  [    1.745718] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  [    1.745752] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  [    1.745775] uhci_hcd 0000:00:1d.2: detected 2 ports
  [    1.745858] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
  [    1.748414] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  [    1.748423] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    1.748430] usb usb4: Product: UHCI Host Controller
  [    1.748436] usb usb4: Manufacturer: Linux 4.9.0-8-686-pae uhci_hcd
  [    1.748441] usb usb4: SerialNumber: 0000:00:1d.2
  [    1.750449] hub 4-0:1.0: USB hub found
  [    1.750513] hub 4-0:1.0: 2 ports detected
  [    1.752793] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  [    1.752835] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  [    1.753788] uhci_hcd 0000:00:1d.3: detected 2 ports
  [    1.753881] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
  [    1.754187] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  [    1.754195] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    1.754201] usb usb5: Product: UHCI Host Controller
  [    1.754207] usb usb5: Manufacturer: Linux 4.9.0-8-686-pae uhci_hcd
  [    1.754214] usb usb5: SerialNumber: 0000:00:1d.3
  [    1.757336] hub 5-0:1.0: USB hub found
  [    1.758397] hub 5-0:1.0: 2 ports detected
  [    1.915237] ata1.00: ATAPI: TOSHIBA CD/DVDW SDR5372V, TU11, max UDMA/33
  [    1.925944] ata1.01: HPA detected: current 39177839, native 39179952
  [    1.925953] ata1.01: ATA-7: SAMSUNG SV0221N, UA100-07, max UDMA/133
  [    1.925959] ata1.01: 39177839 sectors, multi 16: LBA48
  [    1.956306] ata1.00: configured for UDMA/33
  [    1.958977] ata1.01: configured for UDMA/100
  [    1.964181] scsi 0:0:0:0: CD-ROM            TOSHIBA  CD/DVDW SDR5372V TU11 PQ: 0 ANSI: 5
  [    1.978484] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SV0221N  0-07 PQ: 0 ANSI: 5
  [    1.999365] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
  [    1.999371] cdrom: Uniform CD-ROM driver Revision: 3.20
  [    2.000589] sr 0:0:0:0: Attached scsi CD-ROM sr0
  [    2.002860] sr 0:0:0:0: Attached scsi generic sg0 type 5
  [    2.008950] scsi 0:0:1:0: Attached scsi generic sg1 type 0
  [    2.033115] sd 0:0:1:0: [sda] 39177839 512-byte logical blocks: (20.1 GB/18.7 GiB)
  [    2.033424] sd 0:0:1:0: [sda] Write Protect is off
  [    2.033434] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
  [    2.033560] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  [    2.103083] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input2
  [    2.130027]  sda: sda1 sda2 < sda5 >
  [    2.132368] sd 0:0:1:0: [sda] Attached SCSI disk
  [    2.144055] tsc: Refined TSC clocksource calibration: 1599.980 MHz
  [    2.144069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17101205016, max_idle_ns: 440795202977 ns
  [    2.285570] random: fast init done
  [    2.881149] PM: Starting manual resume from disk
  [    2.881159] PM: Hibernation image partition 8:5 present
  [    2.881161] PM: Looking for hibernation image.
  [    2.881566] PM: Image not found (code -22)
  [    2.881569] PM: Hibernation image not present or could not be loaded.
  [    3.168315] clocksource: Switched to clocksource tsc
  [    3.425174] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  [    5.733792] random: crng init done
  [    6.364829] udevd[331]: starting version 3.2.2
  [    7.348362] udevd[332]: starting eudev-3.2.2
  [    7.940473] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
  [    7.940486] ACPI: Power Button [PWRB]
  [    7.940897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
  [    7.940907] ACPI: Power Button [PWRF]
  [    8.226491] intel_rng: FWH not detected
  [    8.462329] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  [    8.473792] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160831/utaddress-247)
  [    8.473816] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  [    8.473988] lpc_ich: Resource conflict(s) found affecting gpio_ich
  [    8.795268] [drm] Initialized
  [    8.881063] parport_pc 00:03: reported by Plug and Play ACPI
  [    8.881241] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
  [    9.104887] leds_ss4200: no LED devices found
  [    9.144211] pci 0000:00:00.0: Intel 945G Chipset
  [    9.144247] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
  [    9.144337] pci 0000:00:00.0: detected 8192K stolen memory
  [    9.144400] [drm] Memory usable by graphics device = 256M
  [    9.144407] [drm] Replacing VGA console driver
  [    9.145413] Console: switching to colour dummy device 80x25
  [    9.147833] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  [    9.147837] [drm] Driver supports precise vblank timestamp query.
  [    9.149123] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  [    9.181314] [drm] RC6 disabled, disabling runtime PM support
  [    9.181388] [drm] initialized overlay support
  [    9.182970] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
  [    9.218234] intel_powerclamp: No package C-state available
  [    9.252797] iTCO_vendor_support: vendor-support=0
  [    9.264908] input: PC Speaker as /devices/platform/pcspkr/input/input5
  [    9.318277] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
  [    9.318288] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  [    9.318296] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  [    9.318302] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
  [    9.318307] snd_hda_codec_realtek hdaudioC0D2:    inputs:
  [    9.318316] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
  [    9.318324] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
  [    9.318331] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
  [    9.332917] fbcon: inteldrmfb (fb0) is primary device
  [    9.345610] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
  [    9.347046] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
  [    9.347512] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
  [    9.347976] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
  [    9.348473] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  [    9.348923] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  [    9.465471] Console: switching to colour frame buffer device 160x64
  [    9.502935] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  [    9.511607] ppdev: user-space parallel port driver
  [    9.613399] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  [    9.613519] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
  [    9.614107] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  [   11.184081] r8169 0000:02:00.0 eth0: link down
  [   11.184087] r8169 0000:02:00.0 eth0: link down
  [   11.184212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [   12.692781] r8169 0000:02:00.0 eth0: link up
  [   12.692804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  [   16.898847] Adding 1035260k swap on /dev/sda5.  Priority:-1 extents:1 across:1035260k FS
  [   17.001051] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  [   17.859705] lp0: using parport0 (interrupt-driven).

[свернуть]

[dmitry1903]

/var/log/syslog.1 (в syslog данные только за сегодня)

Открыть содержимое (спойлер)

Feb 27 13:21:58 devuan liblogging-stdlog:  [origin software="rsyslogd" swVersion="8.24.0" x-pid="1412" x-info="http://www.rsyslog.com"] start
Feb 27 13:21:58 devuan kernel: [    0.000000] Linux version 4.9.0-8-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.130-2 (2018-10-27)

[свернуть]

[dmitry1903]

/var/log/Xorg.0.log.old

Открыть содержимое (спойлер)

[ 13032.769]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 13032.769] X Protocol Version 11, Revision 0
[ 13032.769] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
[ 13032.769] Current Operating System: Linux devuan 4.9.0-8-686-pae #1 SMP Debian 4.9.130-2 (2018-10-27) i686
[ 13032.769] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-686-pae root=UUID=581e6c06-3e4a-42c3-8e58-450e49da5df3 ro Advanted options quiet
[ 13032.770] Build Date: 03 November 2018  03:08:43AM
[ 13032.770] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support)
[ 13032.770] Current version of pixman: 0.34.0
[ 13032.770]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[ 13032.770] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13032.770] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 28 01:28:50 2019
[ 13032.770] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13032.771] (==) No Layout section.  Using the first Screen section.
[ 13032.771] (==) No screen section available. Using defaults.
[ 13032.771] (**) |-->Screen "Default Screen Section" (0)
[ 13032.771] (**) |   |-->Monitor "<default monitor>"
[ 13032.772] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[ 13032.772] (==) Automatically adding devices
[ 13032.772] (==) Automatically enabling devices
[ 13032.772] (==) Automatically adding GPU devices
[ 13032.772] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13032.772] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/cyrillic,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[ 13032.772] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13032.772] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13032.772] (II) Loader magic: 0x674720
[ 13032.772] (II) Module ABI versions:
[ 13032.772]    X.Org ANSI C Emulation: 0.4
[ 13032.773]    X.Org Video Driver: 23.0
[ 13032.773]    X.Org XInput driver : 24.1
[ 13032.773]    X.Org Server Extension : 10.0
[ 13032.775] (++) using VT number 7

[ 13032.776] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 13032.777] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13032.792] (--) PCI:*(0:0:2:0) 8086:2772:1458:d000 rev 2, Mem @ 0xe2000000/524288, 0xd0000000/268435456, 0xe2080000/262144, I/O @ 0x0000b000/8, BIOS @ 0x??/131072
[ 13032.792] (II) LoadModule: "glx"
[ 13032.793] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13032.797] (II) Module glx: vendor="X.Org Foundation"
[ 13032.798]    compiled for 1.19.2, module version = 1.0.0
[ 13032.798]    ABI class: X.Org Server Extension, version 10.0
[ 13032.798] (==) Matched intel as autoconfigured driver 0
[ 13032.798] (==) Matched intel as autoconfigured driver 1
[ 13032.798] (==) Matched modesetting as autoconfigured driver 2
[ 13032.798] (==) Matched fbdev as autoconfigured driver 3
[ 13032.798] (==) Matched vesa as autoconfigured driver 4
[ 13032.798] (==) Assigned the driver to the xf86ConfigLayout
[ 13032.798] (II) LoadModule: "intel"
[ 13032.798] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13032.799] (II) Module intel: vendor="X.Org Foundation"
[ 13032.799]    compiled for 1.19.0, module version = 2.99.917
[ 13032.799]    Module class: X.Org Video Driver
[ 13032.799]    ABI class: X.Org Video Driver, version 23.0
[ 13032.799] (II) LoadModule: "modesetting"
[ 13032.800] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 13032.800] (II) Module modesetting: vendor="X.Org Foundation"
[ 13032.800]    compiled for 1.19.2, module version = 1.19.2
[ 13032.800]    Module class: X.Org Video Driver
[ 13032.800]    ABI class: X.Org Video Driver, version 23.0
[ 13032.801] (II) LoadModule: "fbdev"
[ 13032.801] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 13032.801] (II) Module fbdev: vendor="X.Org Foundation"
[ 13032.801]    compiled for 1.19.0, module version = 0.4.4
[ 13032.801]    Module class: X.Org Video Driver
[ 13032.801]    ABI class: X.Org Video Driver, version 23.0
[ 13032.801] (II) LoadModule: "vesa"
[ 13032.802] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 13032.802] (II) Module vesa: vendor="X.Org Foundation"
[ 13032.802]    compiled for 1.19.0, module version = 2.3.4
[ 13032.802]    Module class: X.Org Video Driver
[ 13032.802]    ABI class: X.Org Video Driver, version 23.0
[ 13032.802] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
   i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
   915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
   Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 13032.804] (II) intel: Driver for Intel(R) HD Graphics
[ 13032.804] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 13032.804] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 13032.804] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 13032.804] (II) FBDEV: driver for framebuffer: fbdev
[ 13032.804] (II) VESA: driver for VESA chipsets: vesa
[ 13032.827] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 13032.828] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1 (Timo Aaltonen <tjaalton@debian.org>)
[ 13032.828] (II) intel(0): SNA compiled for use with valgrind
[ 13032.828] (WW) Falling back to old probe method for modesetting
[ 13032.828] (WW) Falling back to old probe method for fbdev
[ 13032.828] (II) Loading sub module "fbdevhw"
[ 13032.829] (II) LoadModule: "fbdevhw"
[ 13032.829] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 13032.829] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 13032.829]    compiled for 1.19.2, module version = 0.0.2
[ 13032.829]    ABI class: X.Org Video Driver, version 23.0
[ 13032.830] (WW) Falling back to old probe method for vesa
[ 13032.830] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[ 13032.831] (--) intel(0): CPU: x86, sse2, sse3, ssse3; using a maximum of 1 threads
[ 13032.831] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[ 13032.831] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13032.831] (==) intel(0): RGB weight 888
[ 13032.831] (==) intel(0): Default visual is TrueColor
[ 13032.831] (II) intel(0): Output VGA1 has no monitor section
[ 13032.832] (II) intel(0): Enabled output VGA1
[ 13032.832] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 13032.832] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 13032.833] (II) intel(0): Enabled output VIRTUAL1
[ 13032.833] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 0
[ 13032.833] (==) intel(0): TearFree disabled
[ 13032.833] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13032.833] (==) intel(0): DPI set to (96, 96)
[ 13032.833] (II) Loading sub module "dri3"
[ 13032.833] (II) LoadModule: "dri3"
[ 13032.833] (II) Module "dri3" already built-in
[ 13032.833] (II) Loading sub module "dri2"
[ 13032.833] (II) LoadModule: "dri2"
[ 13032.833] (II) Module "dri2" already built-in
[ 13032.833] (II) Loading sub module "present"
[ 13032.833] (II) LoadModule: "present"
[ 13032.833] (II) Module "present" already built-in
[ 13032.833] (II) UnloadModule: "modesetting"
[ 13032.834] (II) Unloading modesetting
[ 13032.834] (II) UnloadModule: "fbdev"
[ 13032.834] (II) Unloading fbdev
[ 13032.834] (II) UnloadSubModule: "fbdevhw"
[ 13032.834] (II) Unloading fbdevhw
[ 13032.834] (II) UnloadModule: "vesa"
[ 13032.834] (II) Unloading vesa
[ 13032.834] (==) Depth 24 pixmap format is 32 bpp
[ 13032.835] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 13032.835] (==) intel(0): Backing store enabled
[ 13032.835] (==) intel(0): Silken mouse enabled
[ 13032.835] (II) intel(0): HW Cursor enabled
[ 13032.835] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13032.835] (==) intel(0): DPMS enabled
[ 13032.836] (==) intel(0): Display hotplug detection enabled
[ 13032.836] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 13032.836] (II) intel(0): [DRI2] Setup complete
[ 13032.836] (II) intel(0): [DRI2]   DRI driver: i915
[ 13032.836] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[ 13032.836] (II) intel(0): direct rendering: DRI2 enabled
[ 13032.836] (II) intel(0): hardware support for Present enabled
[ 13032.836] (--) RandR disabled
[ 13032.856] (II) SELinux: Disabled on system
[ 13032.879] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 13032.880] (II) AIGLX: enabled GLX_ARB_create_context
[ 13032.880] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 13032.880] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 13032.880] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 13032.880] (II) AIGLX: enabled GLX_SGI_swap_control
[ 13032.880] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 13032.880] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 13032.880] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 13032.880] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 13032.880] (II) AIGLX: Loaded and initialized i915
[ 13032.880] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 13032.926] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 13032.939] (II) intel(0): Setting screen physical size to 338 x 270
[ 13033.302] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 13033.302] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13033.302] (II) LoadModule: "libinput"
[ 13033.303] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 13033.313] (II) Module libinput: vendor="X.Org Foundation"
[ 13033.313]    compiled for 1.19.0, module version = 0.23.0
[ 13033.313]    Module class: X.Org XInput Driver
[ 13033.313]    ABI class: X.Org XInput driver, version 24.1
[ 13033.313] (II) Using input driver 'libinput' for 'Power Button'
[ 13033.313] (**) Power Button: always reports core events
[ 13033.313] (**) Option "Device" "/dev/input/event3"
[ 13033.314] (**) Option "_source" "server/udev"
[ 13033.315] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 13033.315] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 13033.344] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 13033.344] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13033.344] (**) Option "xkb_model" "pc105"
[ 13033.344] (**) Option "xkb_layout" "us,ru"
[ 13033.344] (**) Option "xkb_variant" ","
[ 13033.344] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 13033.440] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 13033.440] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 13033.441] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13033.441] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13033.441] (II) Using input driver 'libinput' for 'Power Button'
[ 13033.441] (**) Power Button: always reports core events
[ 13033.441] (**) Option "Device" "/dev/input/event2"
[ 13033.441] (**) Option "_source" "server/udev"
[ 13033.442] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 13033.442] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 13033.480] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 13033.480] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 13033.480] (**) Option "xkb_model" "pc105"
[ 13033.480] (**) Option "xkb_layout" "us,ru"
[ 13033.480] (**) Option "xkb_variant" ","
[ 13033.480] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 13033.481] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 13033.482] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 13033.483] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)
[ 13033.483] (II) No input driver specified, ignoring this device.
[ 13033.483] (II) This device may have been added with another device file.
[ 13033.484] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[ 13033.484] (II) No input driver specified, ignoring this device.
[ 13033.484] (II) This device may have been added with another device file.
[ 13033.485] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 13033.485] (II) No input driver specified, ignoring this device.
[ 13033.485] (II) This device may have been added with another device file.
[ 13033.486] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 13033.486] (II) No input driver specified, ignoring this device.
[ 13033.486] (II) This device may have been added with another device file.
[ 13033.487] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 13033.487] (II) No input driver specified, ignoring this device.
[ 13033.487] (II) This device may have been added with another device file.
[ 13033.488] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[ 13033.488] (II) No input driver specified, ignoring this device.
[ 13033.488] (II) This device may have been added with another device file.
[ 13033.489] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13033.489] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 13033.489] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 13033.489] (**) AT Translated Set 2 keyboard: always reports core events
[ 13033.489] (**) Option "Device" "/dev/input/event0"
[ 13033.489] (**) Option "_source" "server/udev"
[ 13033.490] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 13033.490] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 13033.524] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 13033.524] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id
[ 13033.524] (**) Option "xkb_model" "pc105"
[ 13033.524] (**) Option "xkb_layout" "us,ru"
[ 13033.524] (**) Option "xkb_variant" ","
[ 13033.524] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 13033.525] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 13033.526] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 13033.526] (II) config/udev: Adding input device GenPS/2 Genius Mouse (/dev/input/event1)
[ 13033.527] (**) GenPS/2 Genius Mouse: Applying InputClass "libinput pointer catchall"
[ 13033.527] (II) Using input driver 'libinput' for 'GenPS/2 Genius Mouse'
[ 13033.527] (**) GenPS/2 Genius Mouse: always reports core events
[ 13033.527] (**) Option "Device" "/dev/input/event1"
[ 13033.527] (**) Option "_source" "server/udev"
[ 13033.528] (II) input device 'GenPS/2 Genius Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 13033.528] (II) input device 'GenPS/2 Genius Mouse', /dev/input/event1 is a pointer caps
[ 13033.564] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 13033.564] (II) XINPUT: Adding extended input device "GenPS/2 Genius Mouse" (type: MOUSE, id 9)
[ 13033.565] (**) Option "AccelerationScheme" "none"
[ 13033.565] (**) GenPS/2 Genius Mouse: (accel) selected scheme none/0
[ 13033.565] (**) GenPS/2 Genius Mouse: (accel) acceleration factor: 2.000
[ 13033.565] (**) GenPS/2 Genius Mouse: (accel) acceleration threshold: 4
[ 13033.566] (II) input device 'GenPS/2 Genius Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 13033.566] (II) input device 'GenPS/2 Genius Mouse', /dev/input/event1 is a pointer caps
[ 13033.567] (II) config/udev: Adding input device GenPS/2 Genius Mouse (/dev/input/mouse0)
[ 13033.567] (II) No input driver specified, ignoring this device.
[ 13033.567] (II) This device may have been added with another device file.
[ 13033.567] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 13033.568] (II) No input driver specified, ignoring this device.
[ 13033.568] (II) This device may have been added with another device file.
[ 13034.878] (II) intel(0): EDID vendor "ACR", prod id 1712
[ 13034.878] (II) intel(0): Using EDID range info for horizontal sync
[ 13034.878] (II) intel(0): Using EDID range info for vertical refresh
[ 13034.878] (II) intel(0): Printing DDC gathered Modelines:
[ 13034.878] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 13034.879] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 13034.879] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 13034.879] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 13034.879] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 13034.879] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13034.879] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 13034.879] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13034.879] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 13034.879] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 13034.879] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 13034.879] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 13034.879] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 13035.266] (II) UnloadModule: "libinput"
[ 13035.266] (II) UnloadModule: "libinput"
[ 13035.266] (II) UnloadModule: "libinput"
[ 13035.267] (II) UnloadModule: "libinput"
[ 13035.377] (II) Server terminated successfully (0). Closing log file.

[свернуть]

[dmitry1903]

/var/log/Xorg.0.log

Открыть содержимое (спойлер)

[    26.784]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    26.784] X Protocol Version 11, Revision 0
[    26.784] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
[    26.784] Current Operating System: Linux devuan 4.9.0-8-686-pae #1 SMP Debian 4.9.130-2 (2018-10-27) i686
[    26.784] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-686-pae root=UUID=581e6c06-3e4a-42c3-8e58-450e49da5df3 ro Advanted options quiet
[    26.785] Build Date: 03 November 2018  03:08:43AM
[    26.785] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support)
[    26.785] Current version of pixman: 0.34.0
[    26.785]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    26.785] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    26.785] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 28 08:56:22 2019
[    26.947] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.082] (==) No Layout section.  Using the first Screen section.
[    27.082] (==) No screen section available. Using defaults.
[    27.082] (**) |-->Screen "Default Screen Section" (0)
[    27.082] (**) |   |-->Monitor "<default monitor>"
[    27.108] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    27.108] (==) Automatically adding devices
[    27.108] (==) Automatically enabling devices
[    27.108] (==) Automatically adding GPU devices
[    27.108] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    27.526] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/cyrillic,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[    27.526] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.526] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.526] (II) Loader magic: 0x731720
[    27.526] (II) Module ABI versions:
[    27.526]    X.Org ANSI C Emulation: 0.4
[    27.526]    X.Org Video Driver: 23.0
[    27.527]    X.Org XInput driver : 24.1
[    27.527]    X.Org Server Extension : 10.0
[    27.529] (++) using VT number 7

[    27.529] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    27.530] (II) xfree86: Adding drm device (/dev/dri/card0)
[    27.545] (--) PCI:*(0:0:2:0) 8086:2772:1458:d000 rev 2, Mem @ 0xe2000000/524288, 0xd0000000/268435456, 0xe2080000/262144, I/O @ 0x0000b000/8, BIOS @ 0x??/131072
[    27.563] (II) LoadModule: "glx"
[    27.629] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    28.345] (II) Module glx: vendor="X.Org Foundation"
[    28.432]    compiled for 1.19.2, module version = 1.0.0
[    28.432]    ABI class: X.Org Server Extension, version 10.0
[    28.432] (==) Matched intel as autoconfigured driver 0
[    28.432] (==) Matched intel as autoconfigured driver 1
[    28.432] (==) Matched modesetting as autoconfigured driver 2
[    28.432] (==) Matched fbdev as autoconfigured driver 3
[    28.432] (==) Matched vesa as autoconfigured driver 4
[    28.433] (==) Assigned the driver to the xf86ConfigLayout
[    28.433] (II) LoadModule: "intel"
[    28.594] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    28.702] (II) Module intel: vendor="X.Org Foundation"
[    28.702]    compiled for 1.19.0, module version = 2.99.917
[    28.702]    Module class: X.Org Video Driver
[    28.702]    ABI class: X.Org Video Driver, version 23.0
[    28.702] (II) LoadModule: "modesetting"
[    28.703] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    28.747] (II) Module modesetting: vendor="X.Org Foundation"
[    28.747]    compiled for 1.19.2, module version = 1.19.2
[    28.747]    Module class: X.Org Video Driver
[    28.747]    ABI class: X.Org Video Driver, version 23.0
[    28.747] (II) LoadModule: "fbdev"
[    28.748] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    28.762] (II) Module fbdev: vendor="X.Org Foundation"
[    28.762]    compiled for 1.19.0, module version = 0.4.4
[    28.762]    Module class: X.Org Video Driver
[    28.762]    ABI class: X.Org Video Driver, version 23.0
[    28.762] (II) LoadModule: "vesa"
[    28.763] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    28.780] (II) Module vesa: vendor="X.Org Foundation"
[    28.780]    compiled for 1.19.0, module version = 2.3.4
[    28.780]    Module class: X.Org Video Driver
[    28.780]    ABI class: X.Org Video Driver, version 23.0
[    28.780] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
   i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
   915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
   Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    28.782] (II) intel: Driver for Intel(R) HD Graphics
[    28.782] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    28.782] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    28.782] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    28.782] (II) FBDEV: driver for framebuffer: fbdev
[    28.782] (II) VESA: driver for VESA chipsets: vesa
[    28.908] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[    28.908] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1 (Timo Aaltonen <tjaalton@debian.org>)
[    28.908] (II) intel(0): SNA compiled for use with valgrind
[    28.941] (WW) Falling back to old probe method for modesetting
[    28.941] (WW) Falling back to old probe method for fbdev
[    28.941] (II) Loading sub module "fbdevhw"
[    28.941] (II) LoadModule: "fbdevhw"
[    28.941] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    28.953] (II) Module fbdevhw: vendor="X.Org Foundation"
[    28.953]    compiled for 1.19.2, module version = 0.0.2
[    28.953]    ABI class: X.Org Video Driver, version 23.0
[    28.953] (WW) Falling back to old probe method for vesa
[    28.971] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[    28.971] (--) intel(0): CPU: x86, sse2, sse3, ssse3; using a maximum of 1 threads
[    28.971] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    28.971] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    28.971] (==) intel(0): RGB weight 888
[    28.971] (==) intel(0): Default visual is TrueColor
[    28.972] (II) intel(0): Output VGA1 has no monitor section
[    28.973] (II) intel(0): Enabled output VGA1
[    28.973] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    28.973] (II) intel(0): Output VIRTUAL1 has no monitor section
[    28.973] (II) intel(0): Enabled output VIRTUAL1
[    28.973] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 0
[    28.973] (==) intel(0): TearFree disabled
[    28.974] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    28.974] (==) intel(0): DPI set to (96, 96)
[    28.974] (II) Loading sub module "dri3"
[    28.974] (II) LoadModule: "dri3"
[    28.974] (II) Module "dri3" already built-in
[    28.974] (II) Loading sub module "dri2"
[    28.974] (II) LoadModule: "dri2"
[    28.974] (II) Module "dri2" already built-in
[    28.974] (II) Loading sub module "present"
[    28.974] (II) LoadModule: "present"
[    28.974] (II) Module "present" already built-in
[    28.974] (II) UnloadModule: "modesetting"
[    28.974] (II) Unloading modesetting
[    28.974] (II) UnloadModule: "fbdev"
[    28.974] (II) Unloading fbdev
[    28.974] (II) UnloadSubModule: "fbdevhw"
[    28.975] (II) Unloading fbdevhw
[    28.975] (II) UnloadModule: "vesa"
[    28.975] (II) Unloading vesa
[    28.975] (==) Depth 24 pixmap format is 32 bpp
[    29.022] (II) intel(0): SNA initialized with Alviso (gen3) backend
[    29.022] (==) intel(0): Backing store enabled
[    29.022] (==) intel(0): Silken mouse enabled
[    29.223] (II) intel(0): HW Cursor enabled
[    29.223] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    29.237] (==) intel(0): DPMS enabled
[    29.237] (==) intel(0): Display hotplug detection enabled
[    29.257] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[    29.257] (II) intel(0): [DRI2] Setup complete
[    29.257] (II) intel(0): [DRI2]   DRI driver: i915
[    29.257] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    29.257] (II) intel(0): direct rendering: DRI2 enabled
[    29.257] (II) intel(0): hardware support for Present enabled
[    29.257] (--) RandR disabled
[    29.288] (II) SELinux: Disabled on system
[    30.168] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    30.168] (II) AIGLX: enabled GLX_ARB_create_context
[    30.168] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    30.168] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    30.168] (II) AIGLX: enabled GLX_INTEL_swap_event
[    30.168] (II) AIGLX: enabled GLX_SGI_swap_control
[    30.168] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    30.168] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    30.168] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    30.168] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    30.169] (II) AIGLX: Loaded and initialized i915
[    30.169] (II) GLX: Initialized DRI2 GL provider for screen 0
[    30.193] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[    30.208] (II) intel(0): Setting screen physical size to 338 x 270
[    31.347] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    31.347] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    31.347] (II) LoadModule: "libinput"
[    31.362] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    31.444] (II) Module libinput: vendor="X.Org Foundation"
[    31.444]    compiled for 1.19.0, module version = 0.23.0
[    31.445]    Module class: X.Org XInput Driver
[    31.445]    ABI class: X.Org XInput driver, version 24.1
[    31.445] (II) Using input driver 'libinput' for 'Power Button'
[    31.445] (**) Power Button: always reports core events
[    31.445] (**) Option "Device" "/dev/input/event3"
[    31.445] (**) Option "_source" "server/udev"
[    31.447] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    31.447] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    31.476] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[    31.476] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    31.476] (**) Option "xkb_model" "pc105"
[    31.476] (**) Option "xkb_layout" "us,ru"
[    31.476] (**) Option "xkb_variant" ","
[    31.476] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    31.752] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    31.752] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    31.753] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    31.753] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    31.753] (II) Using input driver 'libinput' for 'Power Button'
[    31.753] (**) Power Button: always reports core events
[    31.753] (**) Option "Device" "/dev/input/event2"
[    31.754] (**) Option "_source" "server/udev"
[    31.755] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    31.755] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    31.788] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    31.788] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    31.788] (**) Option "xkb_model" "pc105"
[    31.788] (**) Option "xkb_layout" "us,ru"
[    31.788] (**) Option "xkb_variant" ","
[    31.788] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    31.790] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    31.790] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    31.792] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)
[    31.793] (II) No input driver specified, ignoring this device.
[    31.793] (II) This device may have been added with another device file.
[    31.794] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[    31.794] (II) No input driver specified, ignoring this device.
[    31.794] (II) This device may have been added with another device file.
[    31.795] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    31.795] (II) No input driver specified, ignoring this device.
[    31.795] (II) This device may have been added with another device file.
[    31.796] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[    31.797] (II) No input driver specified, ignoring this device.
[    31.797] (II) This device may have been added with another device file.
[    31.798] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[    31.798] (II) No input driver specified, ignoring this device.
[    31.798] (II) This device may have been added with another device file.
[    31.799] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[    31.799] (II) No input driver specified, ignoring this device.
[    31.799] (II) This device may have been added with another device file.
[    31.800] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    31.801] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    31.801] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    31.801] (**) AT Translated Set 2 keyboard: always reports core events
[    31.801] (**) Option "Device" "/dev/input/event0"
[    31.801] (**) Option "_source" "server/udev"
[    31.802] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    31.802] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    31.834] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    31.834] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id
[    31.834] (**) Option "xkb_model" "pc105"
[    31.834] (**) Option "xkb_layout" "us,ru"
[    31.834] (**) Option "xkb_variant" ","
[    31.834] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    31.836] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    31.836] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    31.838] (II) config/udev: Adding input device GenPS/2 Genius Mouse (/dev/input/event1)
[    31.838] (**) GenPS/2 Genius Mouse: Applying InputClass "libinput pointer catchall"
[    31.838] (II) Using input driver 'libinput' for 'GenPS/2 Genius Mouse'
[    31.838] (**) GenPS/2 Genius Mouse: always reports core events
[    31.838] (**) Option "Device" "/dev/input/event1"
[    31.838] (**) Option "_source" "server/udev"
[    31.839] (II) input device 'GenPS/2 Genius Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    31.839] (II) input device 'GenPS/2 Genius Mouse', /dev/input/event1 is a pointer caps
[    31.872] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    31.872] (II) XINPUT: Adding extended input device "GenPS/2 Genius Mouse" (type: MOUSE, id 9)
[    31.873] (**) Option "AccelerationScheme" "none"
[    31.873] (**) GenPS/2 Genius Mouse: (accel) selected scheme none/0
[    31.873] (**) GenPS/2 Genius Mouse: (accel) acceleration factor: 2.000
[    31.873] (**) GenPS/2 Genius Mouse: (accel) acceleration threshold: 4
[    31.874] (II) input device 'GenPS/2 Genius Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    31.874] (II) input device 'GenPS/2 Genius Mouse', /dev/input/event1 is a pointer caps
[    31.876] (II) config/udev: Adding input device GenPS/2 Genius Mouse (/dev/input/mouse0)
[    31.876] (II) No input driver specified, ignoring this device.
[    31.876] (II) This device may have been added with another device file.
[    31.877] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    31.877] (II) No input driver specified, ignoring this device.
[    31.877] (II) This device may have been added with another device file.
[    31.964] (II) intel(0): EDID vendor "ACR", prod id 1712
[    31.964] (II) intel(0): Using EDID range info for horizontal sync
[    31.964] (II) intel(0): Using EDID range info for vertical refresh
[    31.965] (II) intel(0): Printing DDC gathered Modelines:
[    31.965] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    31.965] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    31.965] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    31.965] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    31.965] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    31.965] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    31.965] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    31.965] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    31.965] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    31.965] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    31.965] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    31.965] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    31.965] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[свернуть]

[endru]

/var/log/Xorg.0.log

завязывай уже копировать все файлы бездумно. есть инструмент фильтрации, называется GREP прогони все файлы на наличие ошибок, и уже ошибки копируй. зачем нам тонна бесполезной информации в которой нет ошибки?

[dmitry1903]

.xsession-errors

Открыть содержимое (спойлер)

Xsession: X session started for devuan at Ср 27 13:22:23 MSK 2019
localuser:devuan being added to access control list
dbus-update-activation-environment: systemd --user not found, ignoring --systemd argument
dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
dbus-update-activation-environment: systemd --user not found, ignoring --systemd argument
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting QT_LINUX_ACCESSIBILITY_ALWAYS_ON=1
OpenGL version: 2.
dbus-update-activation-environment: systemd --user not found, ignoring --systemd argument
dbus-update-activation-environment: setting LANG=ru_RU.UTF-8
dbus-update-activation-environment: setting DISPLAY=:0.0
dbus-update-activation-environment: setting GTK_OVERLAY_SCROLLING=0
dbus-update-activation-environment: setting GTK_CSD=0
dbus-update-activation-environment: setting USER=devuan
dbus-update-activation-environment: setting PWD=/home/devuan
dbus-update-activation-environment: setting HOME=/home/devuan
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting XDG_DATA_DIRS=/usr/share/mate:/usr/local/share/:/usr/share/
dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
dbus-update-activation-environment: setting MAIL=/var/mail/devuan
dbus-update-activation-environment: setting LIBOVERLAY_SCROLLBAR=0
dbus-update-activation-environment: setting TERM=linux
dbus-update-activation-environment: setting SHELL=/bin/bash
dbus-update-activation-environment: setting GNOME_KEYRING_CONTROL=/home/devuan/.cache/keyring-QFR4XZ
dbus-update-activation-environment: setting GPG_AGENT_INFO=/home/devuan/.gnupg/S.gpg-agent:0:1
dbus-update-activation-environment: setting QT_LINUX_ACCESSIBILITY_ALWAYS_ON=1
dbus-update-activation-environment: setting SHLVL=1
dbus-update-activation-environment: setting LOGNAME=devuan
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-E9N2ilciOr,guid=97791736bebe928f46a1a9175c7664e1
dbus-update-activation-environment: setting XAUTHORITY=/home/devuan/.Xauthority
dbus-update-activation-environment: setting PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
dbus-update-activation-environment: setting XDG_SESSION_COOKIE=b53e7963c88419c70ac321325aa3c7f0-1551262943.421381-2008894454
dbus-update-activation-environment: setting _=/usr/bin/dbus-update-activation-environment
x-session-manager[2172]: WARNING: Unable to find provider '' of required component 'dock'
Предупреждение менеджера окон: Log level 16: g_object_set_valist: object class 'MetaFrames' has no property named 'type'
GNOME_KEYRING_CONTROL=/home/devuan/.cache/keyring-QFR4XZ
SSH_AUTH_SOCK=/home/devuan/.cache/keyring-QFR4XZ/ssh
GNOME_KEYRING_CONTROL=/home/devuan/.cache/keyring-QFR4XZ
SSH_AUTH_SOCK=/home/devuan/.cache/keyring-QFR4XZ/ssh
GNOME_KEYRING_CONTROL=/home/devuan/.cache/keyring-QFR4XZ
SSH_AUTH_SOCK=/home/devuan/.cache/keyring-QFR4XZ/ssh

(mate-settings-daemon:2265): Gdk-CRITICAL **: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
[02387918] main libvlc: Запуск vlc с интерфейсом по умолчанию. Используйте 'cvlc' для запуска vlc без интерфейса.
QObject::~QObject: Timers cannot be stopped from another thread

(firefox-esr:2508): Gtk-WARNING **: Theme parsing error: <data>:1:31: Expected ')' in color definition

(firefox-esr:2508): Gtk-WARNING **: Theme parsing error: <data>:1:75: Expected ')' in color definition
alloc factor 0,900000 0,900000
alloc factor 0,900000 0,900000
alloc factor 0,900000 0,900000
alloc factor 0,900000 0,900000
[Parent 2508, Gecko_IOThread] WARNING: pipe error (123): Соединение разорвано другой стороной: file /build/firefox-esr-ALBuIW/firefox-esr-60.5.1esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
[Parent 2508, Gecko_IOThread] WARNING: pipe error (60): Соединение разорвано другой стороной: file /build/firefox-esr-ALBuIW/firefox-esr-60.5.1esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342

###!!! [Parent][MessageChannel] Error: (msgtype=0x1C000A,name=PCameras::Msg___delete__) Channel closing: too late to send/recv, messages will be lost

IPDL protocol error: Handler returned error code!

###!!! [Parent][DispatchAsyncMessage] Error: PCameras::Msg_AllDone Processing error: message was deserialized, but the handler returned false (indicating failure)

Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
Предупреждение менеджера окон: CurrentTime used to choose focus window; focus window may not be correct.
Предупреждение менеджера окон: Got a request to focus the no_focus_window with a timestamp of 0.  This shouldn't happen!
[1551262959,000,xklavier.c:xkl_engine_start_listen/]    The backend does not require manual layout management - but it is provided by the application
Gdk-Message: mate-screensaver: Fatal IO error 11 (Ресурс временно недоступен) on X server :0.0.

Gdk-Message: mate-volume-control-applet: Fatal IO error 11 (Ресурс временно недоступен) on X server :0.0.

[свернуть]

[sidbar]

Может быть из-за блока питания или настроек в биос.

[dmitry1903]

есть инструмент фильтрации, называется GREP прогони все файлы на наличие ошибок, и уже ошибки копируй.

Я не специалист, поэтому просто сделал то, что посоветовал ogost.
Напиши: что конкретно мне надо сделать с командой GREP?

Может быть из-за блока питания или настроек в биос.

Похожая матплата с тем же блоком питания работала нормально.
В биосе никаких необычных настроек не было.
Вначале стояло optimized defaults, потом я поставил fail-safe defaults.

[ferum]

Может быть из-за блока питания или настроек в биос

На 90% проблема аппаратная, мемтест, проверка электролитов на матери, в идеале свежий винт на тест.  Уже потом плевать в сторону операционки

[dmitry1903]

На 90% проблема аппаратная, мемтест, проверка электролитов на матери, в идеале свежий винт на тест.  Уже потом плевать в сторону операционки

Мемтест запускал, память менял.
Как я написал выше, то же было с другим винтом - с Debian 7.
Электролитов там нет, есть твердотельные, поэтому на вид неисправность не определить.

/var/log/messages
Spoiler: Hide
Feb 27 13:21:58 devuan kernel: [    0.000000] Linux version 4.9.0-8-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.130-2 (2018-10-27)
Feb 27 13:21:58 devuan kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended

А вот что значит: Atom PSE erratum detected, BIOS microcode update  recommended?
Перепрошить биос?

[ferum]

А вот что значит: Atom PSE erratum detected, BIOS microcode update  recommended?
Перепрошить биос?

Как раз сегодня читал на другом форуме о проблемах установки lubuntu на одноплатный компьютер с таким процессором, отсылка была https://linuxiumcomau.blogspot.com/2016/10/running-ubuntu-on-intel-bay-trail-and.html типа там сборки с патченным ядром.

[dmitry1903]

Как раз сегодня читал на другом форуме о проблемах установки lubuntu на одноплатный компьютер с таким процессором, отсылка была https://linuxiumcomau.blogspot.com/2016/10/running-ubuntu-on-intel-bay-trail-and.html типа там сборки с патченным ядром.

Спасибо, но с этим я точно не справлюсь.
Там не написано, какой именно Atom.
У меня та же система на том же жестком диске нормально работала с этой матплатой:
http://www.gigabyte.ru/products/page/mb/ga-d425tudrev_1x/#sp
Или вообще нельзя было заменять матплату, а надо было заново установить систему?
Проблема еще и в том, что при попытке установить Devuan на комп с этой злосчастной платой происходят ошибки, хотя Debian ставится нормально.

Но как все-таки понять, что ОС пишет про микрокод биоса?