Автор Тема: [Решено] Xerox Phaser 3010 не печатает  (Прочитано 1261 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн Лесьяр

[Решено] Xerox Phaser 3010 не печатает
« : 07 Июля 2021, 08:27:25 »

ОС Дебиан testing RC2.Этот же принтер печатал в более старой версии Дебиан. После установки новой - отказывается. Согласно распространённой инструкции, скачал драйвер с сайта xerox и сделал следующее:

apt-get install libcups2:i386 libcupsfilters1:i386 libcupsimage2:i386

dpkg -i xerox-phaser-3010-3040_1.0-28_i386.deb

Ошибка: Остановлено «/usr/lib/xrhr3acl.so: cannot open shared object file: No such file or directory»

И действительно, xrhr3acl.so отсутствует в /usr/lib. Вместо этого, драйвер установил туда файл xrhr1acl.so. единица вместо тройки.
« Последнее редактирование: 12 Июля 2021, 23:18:04 от Лесьяр »
 

Оффлайн Лесьяр

Re: Xerox Phaser 3010 не печатает
« Ответ #1 : 07 Июля 2021, 09:14:14 »
/var/log/cups/error_log

D [07/Jul/2021:08:18:33 +0300] [Job 9] GPL Ghostscript 9.53.3: Unrecoverable error, exit code 1
D [07/Jul/2021:08:18:33 +0300] [Job 9] Rendering completed
D [07/Jul/2021:08:18:33 +0300] [Job 9] PID 5797 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [07/Jul/2021:08:18:33 +0300] [Job 9] Hint: Try setting the LogLevel to "debug" to find out more.
D [07/Jul/2021:08:18:33 +0300] [Job 9] Read thread still active, aborting the pending read...
D [07/Jul/2021:08:18:33 +0300] [Job 9] PID 5799 (/usr/lib/cups/backend/usb) exited with no errors.
D [07/Jul/2021:08:18:33 +0300] [Job 9] End of messages
D [07/Jul/2021:08:18:33 +0300] [Job 9] printer-state=3(idle)
D [07/Jul/2021:08:18:33 +0300] [Job 9] printer-state-message="Rendering completed"
D [07/Jul/2021:08:18:33 +0300] [Job 9] printer-state-reasons=none
E [07/Jul/2021:08:18:39 +0300] [Job 10] /usr/lib/xrhr3acl.so: cannot open shared object file: No such file or directory
E [07/Jul/2021:08:18:40 +0300] [Job 10] Unable to open raster stream - : Broken pipe
E [07/Jul/2021:08:18:47 +0300] [Job 10] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [07/Jul/2021:08:18:47 +0300] [Job 10] The following messages were recorded from 08:18:39 to 08:18:47
D [07/Jul/2021:08:18:47 +0300] [Job 10] Applying default options...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Adding start banner page "none".
D [07/Jul/2021:08:18:47 +0300] [Job 10] Adding end banner page "none".
D [07/Jul/2021:08:18:47 +0300] [Job 10] File of type application/pdf queued by "...".
D [07/Jul/2021:08:18:47 +0300] [Job 10] hold_until=0
D [07/Jul/2021:08:18:47 +0300] [Job 10] Queued on "3040" by "...".
D [07/Jul/2021:08:18:47 +0300] [Job 10] time-at-processing=1625635119
D [07/Jul/2021:08:18:47 +0300] [Job 10] 3 filters for job:
D [07/Jul/2021:08:18:47 +0300] [Job 10] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [07/Jul/2021:08:18:47 +0300] [Job 10] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [07/Jul/2021:08:18:47 +0300] [Job 10] xrhr2ap (application/vnd.cups-raster to printer/3040, cost 0)
D [07/Jul/2021:08:18:47 +0300] [Job 10] job-sheets=none,none
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[0]="3040"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[1]="10"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[2]="..."
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[3]="3040 - CUPS 2.3.3op2"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[4]="1"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[5]="noXRSaveBlankSheet XRColorDensityBlackMid=0 Resolution=600dpi PageSize=A4 noTonerMode noCollate MediaType=Plain XRColorDensityBlackHigh=0 noImageEnh noImageRotation XRColorDensityBlackLow=0 number-up=1 job-uuid=urn:uuid:89699d80-d59e-3c22-7181-2d1a97125669 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1625635119 time-at-processing=1625635119"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[6]="/var/spool/cups/d00010-001"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[7]="CUPS_STATEDIR=/run/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[8]="HOME=/var/spool/cups/tmp"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[10]="SERVER_ADMIN=root@dom"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[11]="SOFTWARE=CUPS/2.3.3op2"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[13]="USER=root"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[14]="CUPS_MAX_MESSAGE=2047"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[17]="IPP_PORT=631"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[18]="CHARSET=utf-8"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[19]="LANG=ru_RU.UTF-8"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[20]="PPD=/etc/cups/ppd/3040.ppd"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[21]="RIP_MAX_CACHE=128m"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[22]="CONTENT_TYPE=application/pdf"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[23]="DEVICE_URI=usb://Xerox/Phaser%203010?serial=3196736246"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[24]="PRINTER_INFO=3040"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[25]="PRINTER_LOCATION="
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[26]="PRINTER=3040"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[27]="PRINTER_STATE_REASONS=none"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[28]="CUPS_FILETYPE=document"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[30]="AUTH_I****"
D [07/Jul/2021:08:18:47 +0300] [Job 10] Started filter /usr/lib/cups/filter/pdftopdf (PID 5840)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Started filter /usr/lib/cups/filter/gstoraster (PID 5841)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Started filter /usr/lib/cups/filter/xrhr2ap (PID 5842)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Started backend /usr/lib/cups/backend/usb (PID 5843)
D [07/Jul/2021:08:18:47 +0300] [Job 10] OUTFORMAT=\"<none>\", so output format will be CUPS/PWG Raster
D [07/Jul/2021:08:18:47 +0300] [Job 10] pdftopdf: Last filter determined by the PPD: xrhr2ap; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [07/Jul/2021:08:18:47 +0300] [Job 10] PDF interactive form and annotation flattening done via QPDF
D [07/Jul/2021:08:18:47 +0300] [Job 10] Loading USB quirks from \"/usr/share/cups/usb\".
D [07/Jul/2021:08:18:47 +0300] [Job 10] Loaded 98 quirks.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Printing on printer with URI: usb://Xerox/Phaser%203010?serial=3196736246
D [07/Jul/2021:08:18:47 +0300] [Job 10] libusb_get_device_list=11
D [07/Jul/2021:08:18:47 +0300] [Job 10] STATE: +connecting-to-device
D [07/Jul/2021:08:18:47 +0300] [Job 10] STATE: -connecting-to-device
D [07/Jul/2021:08:18:47 +0300] [Job 10] InitDllInterface()...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Set job-printer-state-message to "/usr/lib/xrhr3acl.so: cannot open shared object file: No such file or directory", current level=ERROR
D [07/Jul/2021:08:18:47 +0300] [Job 10] PID 5840 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [07/Jul/2021:08:18:47 +0300] [Job 10] PID 5842 (/usr/lib/cups/filter/xrhr2ap) stopped with status 1.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Hint: Try setting the LogLevel to "debug" to find out more.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Printer found with device ID: MFG:Xerox;CMD:HBPL;MDL:Phaser 3010;CLS:Printer;DES:Xerox Phaser 3010;STS:JwAAAAAAAAAAAgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA; Device URI: usb://Xerox/Phaser%203010?serial=3196736246
D [07/Jul/2021:08:18:47 +0300] [Job 10] Device protocol: 2
D [07/Jul/2021:08:18:47 +0300] [Job 10] Printer does not like usblp kernel module to be re-attached after job
D [07/Jul/2021:08:18:47 +0300] [Job 10] Отправка данных на принтер.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Sent 0 bytes...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Waiting for read thread to exit...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Color Manager: Calibration Mode/Off
D [07/Jul/2021:08:18:47 +0300] [Job 10] Calling FindDeviceById(cups-3040)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Found device /org/freedesktop/ColorManager/devices/cups_3040
D [07/Jul/2021:08:18:47 +0300] [Job 10] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Calling FindDeviceById(cups-3040)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Found device /org/freedesktop/ColorManager/devices/cups_3040
D [07/Jul/2021:08:18:47 +0300] [Job 10] Calling GetProfileForQualifiers(Gray.Plain.600dpi...)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Failed to send: org.freedesktop.ColorManager.Device.NothingMatched:nothing matched expression \'Gray.Plain.600dpi,Gray.Plain.*,Gray.*.600dpi,Gray.*.*,*\'
D [07/Jul/2021:08:18:47 +0300] [Job 10] Failed to get profile filename for cups-3040
D [07/Jul/2021:08:18:47 +0300] [Job 10] Color Manager: no profiles specified in PPD
D [07/Jul/2021:08:18:47 +0300] [Job 10] Color Manager: ICC Profile: None
D [07/Jul/2021:08:18:47 +0300] [Job 10] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Plain -r600x600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=0 -scupsPageSizeName=A4 -I/usr/share/cups/fonts -c \'<</.HWMargins[11.620000 11.620000 11.619995 11.619995] /Margins[0 0]>>setpagedevice\' -f -_
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[7]=\"CUPS_STATEDIR=/run/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[10]=\"SERVER_ADMIN=root@dom\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[11]=\"SOFTWARE=CUPS/2.3.3op2\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[12]=\"USER=root\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[13]=\"CUPS_MAX_MESSAGE=2047\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[14]=\"CUPS_SERVER=/run/cups/cups.sock\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[15]=\"CUPS_ENCRYPTION=IfRequested\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[16]=\"IPP_PORT=631\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[17]=\"CHARSET=utf-8\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[18]=\"LANG=ru_RU.UTF-8\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[19]=\"PPD=/etc/cups/ppd/3040.ppd\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[20]=\"RIP_MAX_CACHE=128m\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[21]=\"CONTENT_TYPE=application/pdf\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[22]=\"DEVICE_URI=usb://Xerox/Phaser%203010?serial=3196736246\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[23]=\"PRINTER_INFO=3040\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[24]=\"PRINTER_LOCATION=\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[25]=\"PRINTER=3040\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[26]=\"PRINTER_STATE_REASONS=none\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[27]=\"CUPS_FILETYPE=document\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[28]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[29]=\"AUTH_INFO_REQUIRED=none\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] Start rendering...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Processing page 1...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Error: /ioerror in --showpage--
D [07/Jul/2021:08:18:47 +0300] [Job 10] Operand stack:
D [07/Jul/2021:08:18:47 +0300] [Job 10] true   (/tmp/gs_HMsKom)   --nostringval--   1   true
D [07/Jul/2021:08:18:47 +0300] [Job 10] Execution stack:
D [07/Jul/2021:08:18:47 +0300] [Job 10] %interp_exit   .runexec2   --nostringval--   showpage   --nostringval--   2   %stopped_push   --nostringval--   showpage   showpage   false   1   %stopped_push   1990   2   3   %oparray_pop   1989   2   3   %oparray_pop   1977   2   3   %oparray_pop   showpage   1978   4   3   %oparray_pop   showpage   showpage   2   1   1   showpage   %for_pos_int_continue   1981   4   7   %oparray_pop   showpage   showpage   1840   3   9   %oparray_pop   showpage   showpage
D [07/Jul/2021:08:18:47 +0300] [Job 10] Dictionary stack:
D [07/Jul/2021:08:18:47 +0300] [Job 10] --dict:741/1123(ro)(G)--   --dict:1/20(G)--   --dict:80/200(L)--   --dict:80/200(L)--   --dict:133/256(ro)(G)--   --dict:320/325(ro)(G)--   --dict:33/64(L)--   --dict:6/9(L)--   --dict:6/20(L)--
D [07/Jul/2021:08:18:47 +0300] [Job 10] Current allocation mode is local
D [07/Jul/2021:08:18:47 +0300] [Job 10] Last OS error: Broken pipe
D [07/Jul/2021:08:18:47 +0300] [Job 10] GPL Ghostscript 9.53.3: Unrecoverable error, exit code 1
D [07/Jul/2021:08:18:47 +0300] [Job 10] Rendering completed
D [07/Jul/2021:08:18:47 +0300] [Job 10] PID 5841 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Hint: Try setting the LogLevel to "debug" to find out more.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Read thread still active, aborting the pending read...
D [07/Jul/2021:08:18:47 +0300] [Job 10] PID 5843 (/usr/lib/cups/backend/usb) exited with no errors.
D [07/Jul/2021:08:18:47 +0300] [Job 10] End of messages
D [07/Jul/2021:08:18:47 +0300] [Job 10] printer-state=3(idle)
D [07/Jul/2021:08:18:47 +0300] [Job 10] printer-state-message="Rendering completed"
D [07/Jul/2021:08:18:47 +0300] [Job 10] printer-state-reasons=none
 

Онлайн dzhoser

Re: Xerox Phaser 3010 не печатает
« Ответ #2 : 07 Июля 2021, 10:01:43 »
Дайте вывод
arch
Ubuntu->Linux mint->Astra Linux SE->Debian 11
Для новичков
 

Оффлайн Лесьяр

Re: Xerox Phaser 3010 не печатает
« Ответ #3 : 07 Июля 2021, 11:03:24 »
Дайте вывод
Код: [Выделить]

arch
x86_64
 

Онлайн dzhoser

Re: Xerox Phaser 3010 не печатает
« Ответ #4 : 07 Июля 2021, 11:26:11 »
Драйвер для 32 битной архитектуры. По умолчанию из коробки не печатает?
попробуйте sudo apt install ia32-libssudo dpkg --add-architecture i386sudo apt Install -fsudo apt update && sudo apt upgrade -y
« Последнее редактирование: 07 Июля 2021, 11:41:26 от dzhoser »
Ubuntu->Linux mint->Astra Linux SE->Debian 11
Для новичков
 

Оффлайн Лесьяр

Re: Xerox Phaser 3010 не печатает
« Ответ #5 : 07 Июля 2021, 11:56:28 »
ia32-libs установить не удалось:

root@dom:/var/log/cups# apt install ia32-libs
Чтение списков пакетов… Готово
Построение дерева зависимостей… Готово
Чтение информации о состоянии… Готово         
Пакет ia32-libs недоступен, но упомянут в списке зависимостей другого
пакета. Это может означать, что пакет отсутствует, устарел или
доступен из источников, не упомянутых в sources.list
Однако следующие пакеты могут его заменить:
  lib32z1

E: Для пакета «ia32-libs» не найден кандидат на установку

Установил lib32z1 и ошибка осталась прежней. Добавил новый принтер (драйвер) в cups и у него ошибка "Остановлено
"Filter failed""
такая ошибка уже была и до установки lib32z1.
 

Оффлайн Лесьяр

Re: Xerox Phaser 3010 не печатает
« Ответ #6 : 07 Июля 2021, 11:58:02 »
sources.list:

# deb cdrom:[Debian GNU/Linux bullseye-DI-rc2 _Bullseye_ - Official Snapshot amd64 NETINST 20210607-15:56]/ bullseye main

#deb cdrom:[Debian GNU/Linux bullseye-DI-rc2 _Bullseye_ - Official Snapshot amd64 NETINST 20210607-15:56]/ bullseye main

deb http://deb.debian.org/debian/ bullseye main non-free contrib
# deb-src http://deb.debian.org/debian/ bullseye main non-free contrib

deb http://security.debian.org/debian-security bullseye-security main contrib non-free
# deb-src http://security.debian.org/debian-security bullseye-security main contrib non-free

# bullseye-updates, to get updates before a point release is made;
# see https://www.debian.org/doc/manuals/debian-reference/ch02.en.html#_updates_and_backports
deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
# deb-src http://deb.debian.org/debian/ bullseye-updates main contrib non-free

# bullseye-backports, previously on backports.debian.org
deb http://deb.debian.org/debian/ bullseye-backports main contrib non-free
# deb-src http://deb.debian.org/debian/ bullseye-backports main contrib non-free

# This system was installed using small removable media
# (e.g. netinst, live or single CD). The matching "deb cdrom"
# entries were disabled at the end of the installation process.
# For information about how to configure apt package sources,
# see the sources.list(5) manual.   
 

Онлайн dzhoser

Re: Xerox Phaser 3010 не печатает
« Ответ #7 : 07 Июля 2021, 12:17:53 »
 А в списке cups данный принтер отсутствует? Он у вас как подключен usb wifi?
Ubuntu->Linux mint->Astra Linux SE->Debian 11
Для новичков
 

Оффлайн ferum

Re: Xerox Phaser 3010 не печатает
« Ответ #8 : 07 Июля 2021, 12:27:14 »
Лесьяр, Вы пользуетесь мануалом времён debian 7, забудьте про ia32-libs

sudo dpkg --add-architecture i386
sudo apt install libc6-i386

Если повторится Ошибка: Остановлено «/usr/lib/xrhr3acl.so: cannot open shared object file: No such file or directory»
 сделайте символическую ссылку
sudo ln -s /usr/lib/xrhr1acl.so /usr/lib/xrhr3acl.soкак теперь говорят в рекламе лекарств. вам может помочь, но это не точно.
З.Ы. какой смысл заморачиваться с дистрибутивом, который через пару недель будет забыт.
Русские дебианщики против цифрового слабоумия !
 

Оффлайн Лесьяр

Re: Xerox Phaser 3010 не печатает
« Ответ #9 : 07 Июля 2021, 12:47:34 »
Лесьяр, Вы пользуетесь мануалом времён debian 7, забудьте про ia32-libs

Код: [Выделить]

sudo dpkg --add-architecture i386
sudo apt install libc6-i386


Если повторится Ошибка: Остановлено «/usr/lib/xrhr3acl.so: cannot open shared object file: No such file or directory»
 сделайте символическую ссылку
Код: [Выделить]

sudo ln -s /usr/lib/xrhr1acl.so /usr/lib/xrhr3acl.so

как теперь говорят в рекламе лекарств. вам может помочь, но это не точно.

Сделал. Теперь, ошибка или:
"Filter failed"
или
"libstdc++.so.6: cannot open shared object file: No such file or directory"

Цитировать
З.Ы. какой смысл заморачиваться с дистрибутивом, который через пару недель будет забыт.
Я планировал его обновить до стабильного. Его же в июне выпустили, наверное вряд ли поддержка старого принтера измениться с июня.
 

Оффлайн Лесьяр

Re: Xerox Phaser 3010 не печатает
« Ответ #10 : 07 Июля 2021, 12:48:19 »
А в списке cups данный принтер отсутствует? Он у вас как подключен usb wifi?
А в списке cups данный принтер отсутствует? Он у вас как подключен usb wifi?
Все установленные принтеры (драйверы) в cups присутствуют.
Подключен по usb.
 

Онлайн dzhoser

Re: Xerox Phaser 3010 не печатает
« Ответ #11 : 07 Июля 2021, 13:17:56 »
А если добавить принтер через cups? там должен быть драйвер. Принтер не новый.
Ubuntu->Linux mint->Astra Linux SE->Debian 11
Для новичков
 

Оффлайн ferum

Re: Xerox Phaser 3010 не печатает
« Ответ #12 : 07 Июля 2021, 16:32:50 »
"libstdc++.so.6: cannot open shared object file: No such file or directory"
https://packages.debian.org/bullseye/libstdc++6
возможно архитектуры i386
В прочем мануал https://obu4alka.ru/ustanovka-printera-xerox-phaser-3010-ubuntu-18-04-64bit.html
 на вскидку вижу только косяк с командой перезапуска cups
sudo systemctl restart cups
« Последнее редактирование: 07 Июля 2021, 16:40:08 от ferum »
Русские дебианщики против цифрового слабоумия !
 

Оффлайн Лесьяр

Re: Xerox Phaser 3010 не печатает
« Ответ #13 : 10 Июля 2021, 07:46:34 »
А если добавить принтер через cups? там должен быть драйвер. Принтер не новый.
В cups должен быть свой драйвер? А как установить именно его?
Я устанавливал и через cups, но драйвер при этом использовался тот-же - от xerox.
 

Оффлайн Лесьяр

Re: Xerox Phaser 3010 не печатает
« Ответ #14 : 10 Июля 2021, 07:48:52 »
ferum
В системе есть libstdc++6. И всё что указано в том мануале тоже есть. Теперь, ошибка следующая:

Остановлено
"libstdc++.so.6: cannot open shared object file: No such file or directory"


/var/log/cups/error_log
E [10/Jul/2021:05:54:21 +0300] Missing value on line 46 of /var/cache/cups/job.cache.
E [10/Jul/2021:07:06:11 +0300] Missing value on line 46 of /var/cache/cups/job.cache.
E [10/Jul/2021:07:06:14 +0300] Missing value on line 46 of /var/cache/cups/job.cache.
E [10/Jul/2021:07:09:49 +0300] [CGI] ippfind (PID 13527) stopped with status 1!
E [10/Jul/2021:07:09:49 +0300] [cups-deviced] PID 13518 (driverless) stopped with status 1!
E [10/Jul/2021:07:10:43 +0300] [Job 24] libstdc++.so.6: cannot open shared object file: No such file or directory
E [10/Jul/2021:07:10:44 +0300] [Job 24] Unable to open raster stream - : Broken pipe
E [10/Jul/2021:07:10:52 +0300] [Job 24] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [10/Jul/2021:07:10:52 +0300] [Job 24] The following messages were recorded from 07:10:43 to 07:10:52
D [10/Jul/2021:07:10:52 +0300] [Job 24] Applying default options...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Adding start banner page "none".
D [10/Jul/2021:07:10:52 +0300] [Job 24] Queued on "via-cups-Xerox_Phaser_3010" by "...".
D [10/Jul/2021:07:10:52 +0300] [Job 24] Auto-typing file...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Request file type is application/pdf.
D [10/Jul/2021:07:10:52 +0300] [Job 24] File of type application/pdf queued by "...".
D [10/Jul/2021:07:10:52 +0300] [Job 24] Adding end banner page "none".
D [10/Jul/2021:07:10:52 +0300] [Job 24] time-at-processing=1625890243
D [10/Jul/2021:07:10:52 +0300] [Job 24] 3 filters for job:
D [10/Jul/2021:07:10:52 +0300] [Job 24] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [10/Jul/2021:07:10:52 +0300] [Job 24] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [10/Jul/2021:07:10:52 +0300] [Job 24] xrhr1ap (application/vnd.cups-raster to printer/via-cups-Xerox_Phaser_3010, cost 0)
D [10/Jul/2021:07:10:52 +0300] [Job 24] job-sheets=none,none
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[0]="via-cups-Xerox_Phaser_3010"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[1]="24"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[2]="..."
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[3]="Без имени 1"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[4]="1"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[5]="PageSize=A4 job-uuid=urn:uuid:48ea0e32-f445-3cdc-4d84-73c24ff61a03 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1625890243 time-at-processing=1625890243 document-name-supplied=R769Dn"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[6]="/var/spool/cups/d00024-001"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[7]="CUPS_STATEDIR=/run/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[8]="HOME=/var/spool/cups/tmp"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[10]="SERVER_ADMIN=root@dom"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[11]="SOFTWARE=CUPS/2.3.3op2"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[13]="USER=root"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[14]="CUPS_MAX_MESSAGE=2047"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[17]="IPP_PORT=631"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[18]="CHARSET=utf-8"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[19]="LANG=ru_RU.UTF-8"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[20]="PPD=/etc/cups/ppd/via-cups-Xerox_Phaser_3010.ppd"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[21]="RIP_MAX_CACHE=128m"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[22]="CONTENT_TYPE=application/pdf"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[23]="DEVICE_URI=usb://Xerox/Phaser%203010?serial=3196736246"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[24]="PRINTER_INFO=via-cups-Xerox Phaser 3010"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[25]="PRINTER_LOCATION="
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[26]="PRINTER=via-cups-Xerox_Phaser_3010"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[27]="PRINTER_STATE_REASONS=none"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[28]="CUPS_FILETYPE=document"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[30]="AUTH_I****"
D [10/Jul/2021:07:10:52 +0300] [Job 24] Started filter /usr/lib/cups/filter/pdftopdf (PID 13741)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Started filter /usr/lib/cups/filter/gstoraster (PID 13742)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Started filter /usr/lib/cups/filter/xrhr1ap (PID 13743)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Started backend /usr/lib/cups/backend/usb (PID 13744)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Loading USB quirks from \"/usr/share/cups/usb\".
D [10/Jul/2021:07:10:52 +0300] [Job 24] Loaded 98 quirks.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Printing on printer with URI: usb://Xerox/Phaser%203010?serial=3196736246
D [10/Jul/2021:07:10:52 +0300] [Job 24] OUTFORMAT=\"<none>\", so output format will be CUPS/PWG Raster
D [10/Jul/2021:07:10:52 +0300] [Job 24] libusb_get_device_list=11
D [10/Jul/2021:07:10:52 +0300] [Job 24] STATE: +connecting-to-device
D [10/Jul/2021:07:10:52 +0300] [Job 24] STATE: -connecting-to-device
D [10/Jul/2021:07:10:52 +0300] [Job 24] Printer found with device ID: MFG:Xerox;CMD:HBPL;MDL:Phaser 3010;CLS:Printer;DES:Xerox Phaser 3010;STS:JwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAQAaBAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA; Device URI: usb://Xerox/Phaser%203010?serial=3196736246
D [10/Jul/2021:07:10:52 +0300] [Job 24] Device protocol: 2
D [10/Jul/2021:07:10:52 +0300] [Job 24] Printer does not like usblp kernel module to be re-attached after job
D [10/Jul/2021:07:10:52 +0300] [Job 24] pdftopdf: Last filter determined by the PPD: xrhr1ap; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Отправка данных на принтер.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Set job-printer-state-message to "Отправка данных на принтер.", current level=INFO
D [10/Jul/2021:07:10:52 +0300] [Job 24] PDF interactive form and annotation flattening done via QPDF
D [10/Jul/2021:07:10:52 +0300] [Job 24] PID 13741 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Color Manager: Calibration Mode/Off
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling FindDeviceById(cups-via-cups-Xerox_Phaser_3010)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Found device /org/freedesktop/ColorManager/devices/cups_via_cups_Xerox_Phaser_3010
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling FindDeviceById(cups-via-cups-Xerox_Phaser_3010)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Found device /org/freedesktop/ColorManager/devices/cups_via_cups_Xerox_Phaser_3010
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling GetProfileForQualifiers(Gray.Plain.600dpi...)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Found profile /org/freedesktop/ColorManager/profiles/via_cups_Xerox_Phaser_3010_Gray__
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Use profile filename: \'\'
D [10/Jul/2021:07:10:52 +0300] [Job 24] Color Manager: ICC Profile:
D [10/Jul/2021:07:10:52 +0300] [Job 24] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Plain -r600x600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=0 -scupsPageSizeName=A4 -I/usr/share/cups/fonts -c \'<</.HWMargins[11.620000 11.620000 11.619995 11.619995] /Margins[0 0]>>setpagedevice\' -f -_
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[7]=\"CUPS_STATEDIR=/run/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[10]=\"SERVER_ADMIN=root@dom\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[11]=\"SOFTWARE=CUPS/2.3.3op2\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[12]=\"USER=root\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[13]=\"CUPS_MAX_MESSAGE=2047\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[14]=\"CUPS_SERVER=/run/cups/cups.sock\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[15]=\"CUPS_ENCRYPTION=IfRequested\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[16]=\"IPP_PORT=631\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[17]=\"CHARSET=utf-8\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[18]=\"LANG=ru_RU.UTF-8\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[19]=\"PPD=/etc/cups/ppd/via-cups-Xerox_Phaser_3010.ppd\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[20]=\"RIP_MAX_CACHE=128m\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[21]=\"CONTENT_TYPE=application/pdf\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[22]=\"DEVICE_URI=usb://Xerox/Phaser%203010?serial=3196736246\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[23]=\"PRINTER_INFO=via-cups-Xerox Phaser 3010\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[24]=\"PRINTER_LOCATION=\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[25]=\"PRINTER=via-cups-Xerox_Phaser_3010\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[26]=\"PRINTER_STATE_REASONS=none\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[27]=\"CUPS_FILETYPE=document\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[28]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[29]=\"AUTH_INFO_REQUIRED=none\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] InitDllInterface()...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Set job-printer-state-message to "libstdc++.so.6: cannot open shared object file: No such file or directory", current level=ERROR
D [10/Jul/2021:07:10:52 +0300] [Job 24] PID 13743 (/usr/lib/cups/filter/xrhr1ap) stopped with status 1.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Hint: Try setting the LogLevel to "debug" to find out more.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Sent 0 bytes...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Start rendering...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Processing page 1...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Error: /ioerror in --showpage--
D [10/Jul/2021:07:10:52 +0300] [Job 24] Operand stack:
D [10/Jul/2021:07:10:52 +0300] [Job 24] true   (/tmp/gs_DJxiPU)   --nostringval--   1   true
D [10/Jul/2021:07:10:52 +0300] [Job 24] Execution stack:
D [10/Jul/2021:07:10:52 +0300] [Job 24] %interp_exit   .runexec2   --nostringval--   showpage   --nostringval--   2   %stopped_push   --nostringval--   showpage   showpage   false   1   %stopped_push   1990   2   3   %oparray_pop   1989   2   3   %oparray_pop   1977   2   3   %oparray_pop   showpage   1978   4   3   %oparray_pop   showpage   showpage   2   1   1   showpage   %for_pos_int_continue   1981   4   7   %oparray_pop   showpage   showpage   1840   3   9   %oparray_pop   showpage   showpage
D [10/Jul/2021:07:10:52 +0300] [Job 24] Dictionary stack:
D [10/Jul/2021:07:10:52 +0300] [Job 24] --dict:741/1123(ro)(G)--   --dict:1/20(G)--   --dict:80/200(L)--   --dict:80/200(L)--   --dict:133/256(ro)(G)--   --dict:320/325(ro)(G)--   --dict:33/64(L)--   --dict:6/9(L)--   --dict:6/20(L)--
D [10/Jul/2021:07:10:52 +0300] [Job 24] Current allocation mode is local
D [10/Jul/2021:07:10:52 +0300] [Job 24] Last OS error: Broken pipe
D [10/Jul/2021:07:10:52 +0300] [Job 24] GPL Ghostscript 9.53.3: Unrecoverable error, exit code 1
D [10/Jul/2021:07:10:52 +0300] [Job 24] Rendering completed
D [10/Jul/2021:07:10:52 +0300] [Job 24] PID 13742 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Hint: Try setting the LogLevel to "debug" to find out more.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Waiting for read thread to exit...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Read thread still active, aborting the pending read...
D [10/Jul/2021:07:10:52 +0300] [Job 24] PID 13744 (/usr/lib/cups/backend/usb) exited with no errors.
D [10/Jul/2021:07:10:52 +0300] [Job 24] End of messages
D [10/Jul/2021:07:10:52 +0300] [Job 24] printer-state=3(idle)
D [10/Jul/2021:07:10:52 +0300] [Job 24] printer-state-message="Rendering completed"
D [10/Jul/2021:07:10:52 +0300] [Job 24] printer-state-reasons=none
 

Теги:
 

[Решено]Отваливается сеть

Автор ogost

Ответов: 7
Просмотров: 3588
Последний ответ 26 Декабря 2012, 06:18:47
от ogost
[Решено] Не работает WiFi на ноутбуке ASUS X502CA

Автор ioann.sys

Ответов: 3
Просмотров: 4820
Последний ответ 09 Августа 2014, 00:58:52
от ioann.sys
[Решено] Не монтируется флешка (после dd)

Автор Silent

Ответов: 13
Просмотров: 1587
Последний ответ 01 Августа 2020, 09:06:45
от ogost
[РЕШЕНО] Частота процессора

Автор polzovatel

Ответов: 0
Просмотров: 1838
Последний ответ 29 Марта 2011, 12:59:00
от polzovatel
[Решено] Не работает монитор на intel atom

Автор mayor

Ответов: 6
Просмотров: 4625
Последний ответ 03 Октября 2014, 16:47:43
от Sferg