Автор Тема: Настройка Аудиокарты  (Прочитано 14255 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн animegirl

  • Местный житель
  • ***
  • Сообщений: 175
Настройка Аудиокарты
« : 16 Апреля 2012, 10:54:17 »
Система Debian 6 amd64
Помогите поправить ситуацию пожалуйста
« Последнее редактирование: 19 Апреля 2012, 19:18:14 от animegirl »
 

Оффлайн Malaheenee

Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #1 : 16 Апреля 2012, 13:21:12 »
Мало информации.
Проверьте в alsamixer звуковое устройство по умолчанию.
Все мы где-то, когда-то и в чем-то были новичками.
 

Оффлайн animegirl

  • Местный житель
  • ***
  • Сообщений: 175
Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #2 : 16 Апреля 2012, 14:02:13 »
Вот, что выдала попытка зайти в меню "Edit -> Sound Card Properties"
server@localhost:~$ /usr/bin/gnome-alsamixer

(gnome-alsamixer:5777): GLib-GObject-CRITICAL **: g_type_instance_get_private: assertion `instance != NULL && instance->g_class != NULL' failed
Segmentation fault

И программа упала (
 

Оффлайн Malaheenee

Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #3 : 16 Апреля 2012, 14:17:47 »
Его же можно запустить просто в терминале, просто alsamixer.
Вообще, как проверяли звук?
Все мы где-то, когда-то и в чем-то были новичками.
 

Оффлайн animegirl

  • Местный житель
  • ***
  • Сообщений: 175
Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #4 : 16 Апреля 2012, 14:21:40 »
server@localhost:~$ alsamixer
cannot open mixer: No such file or directory

Сначала был шум, при логине чуть не свалилась с перепугу, потом наинсталила драйверов, в итоге убила звук окончательно. в "Control Center" тестировала в "Multimedia System Selector", раздел "Sound" вообще отказывается открываться.

Сообщение объединено: 16 Апреля 2012, 14:24:02
Напиши пожалуйста, какую команду прогнать, чтоб выдать всю нужную инфу по системе, чтоб ты смог понять, что да как
« Последнее редактирование: 16 Апреля 2012, 14:24:02 от animegirl »
 

Оффлайн Malaheenee

Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #5 : 16 Апреля 2012, 14:30:10 »
Вывод под спойлер:
dpkg -l | grep alsa
lspci | grep -i audio
Исходя из предыдущего опыта - система просто тупо не видит эту карту.
Все мы где-то, когда-то и в чем-то были новичками.
 

Оффлайн animegirl

  • Местный житель
  • ***
  • Сообщений: 175
Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #6 : 16 Апреля 2012, 14:37:53 »
Spoiler: ShowHide

server@localhost:~$ dpkg -l | grep alsa
ii  alsa-base                            1.0.23+dfsg-2                     ALSA driver configuration files
ii  alsa-oss                             1.0.17-4                          ALSA wrapper for OSS applications
ii  alsa-source                          1.0.23+dfsg-2                     ALSA driver sources
ii  alsa-tools                           1.0.23-3+b1                       Console based ALSA utilities for specific hardware
ii  alsa-tools-gui                       1.0.23-3+b1                       GUI based ALSA utilities for specific hardware
ii  alsa-utils                           1.0.23-3                          Utilities for configuring and using ALSA
ii  alsamixergui                         0.9.0rc2-1-9                      graphical soundcard mixer for ALSA soundcard driver
ii  alsaplayer-alsa                      0.99.80-5+b1                      PCM player designed for ALSA (ALSA output module)
ii  alsaplayer-common                    0.99.80-5+b1                      PCM player designed for ALSA (common files)
ii  alsaplayer-gtk                       0.99.80-5+b1                      PCM player designed for ALSA (GTK+ version)
rc  cairo-dock-alsamixer-plugin          2.1.3.10-3                        Cairo-dock - Alsamixer plug-in
ii  gnome-alsamixer                      0.9.7~cvs.20060916.ds.1-2         ALSA sound mixer for GNOME
ii  gstreamer0.10-alsa                   0.10.30-1                         GStreamer plugin for ALSA
ii  libsdl1.2debian-alsa                 1.2.14-6.1                        Simple DirectMedia Layer (with X11 and ALSA options)

Spoiler: ShowHide

server@localhost:~$ lspci | grep -i audio
01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1)
0a:03.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster


От себя добавлю, материнка "H8SGL-F", встроенного аудио на ней нету
 

Оффлайн Malaheenee

Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #7 : 16 Апреля 2012, 17:35:03 »
Тэк-с. Зачем тут alsa-oss - не понятно. Если попробовать его снести, что говорит?
aptitude purge alsa-ossЧто говорят:
amixer scontrols
aplay -l
?
Все мы где-то, когда-то и в чем-то были новичками.
 

Оффлайн Brainey

Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #8 : 16 Апреля 2012, 19:26:06 »
cannot open mixer: No such file or directory
Установлен ли udev и нет ли ругани в dmesg?
Конференция форума в jabber: debianforum@conference.jabber.ru | Клуб кедоводов: kde@conference.jabber.ru
 

Оффлайн animegirl

  • Местный житель
  • ***
  • Сообщений: 175
Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #9 : 16 Апреля 2012, 21:13:13 »
Spoiler: ShowHide
server@localhost:~$ amixer scontrols
amixer: Mixer attach default error: No such file or directory


Spoiler: ShowHide
server@localhost:~$ aplay -l
aplay: device_list:235: no soundcards found...


udev - 164-3



Сообщение объединено: 16 Апреля 2012, 21:14:03
Spoiler: ShowHide

server@localhost:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-41squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Mar 22 17:26:33 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=8dd2a566-ffaf-47ef-80e7-816958041332 ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
[    0.000000]  BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[    0.000000]  BIOS-e820: 00000000cfe9e000 - 00000000cfea0000 (reserved)
[    0.000000]  BIOS-e820: 00000000cfea0000 - 00000000cfeb2000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cfeb2000 - 00000000cfee0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfee0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000042f000000 (usable)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x42f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000042f000000 aka 17136M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cfe90000 page 4k
[    0.000000] kernel direct mapping tables up to cfe90000 @ 10000-13000
[    0.000000] init_memory_mapping: 0000000100000000-000000042f000000
[    0.000000]  0100000000 - 0400000000 page 1G
[    0.000000]  0400000000 - 042f000000 page 2M
[    0.000000] kernel direct mapping tables up to 42f000000 @ 12000-14000
[    0.000000] RAMDISK: 3770d000 - 37fef042
[    0.000000] ACPI: RSDP 00000000000fa170 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000cfea0100 0007C (v01 SMCI            20111111 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cfea0290 000F4 (v03 111111 FACP1653 20111111 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cfea0630 05A5E (v01  1A711 1A711000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cfeb2000 00040
[    0.000000] ACPI: APIC 00000000cfea0390 000D8 (v01 111111 APIC1653 20111111 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cfea0470 0003C (v01 111111 OEMMCFG  20111111 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cfeb2040 00075 (v01 111111 OEMB1653 20111111 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cfeaa630 00038 (v01 111111 OEMHPET  20111111 MSFT 00000097)
[    0.000000] ACPI: SRAT 00000000cfeaa670 001D0 (v02 AMD    AGESA    00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 00000000cfeaa840 02E04 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: EINJ 00000000cfead650 00130 (v01  AMIER AMI_EINJ 20111111 MSFT 00000097)
[    0.000000] ACPI: BERT 00000000cfead7e0 00030 (v01  AMIER AMI_BERT 20111111 MSFT 00000097)
[    0.000000] ACPI: ERST 00000000cfead810 001B0 (v01  AMIER AMI_ERST 20111111 MSFT 00000097)
[    0.000000] ACPI: HEST 00000000cfead9c0 000A8 (v01  AMIER ABC_HEST 20111111 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 32 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 33 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 34 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 35 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 36 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 37 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 38 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 39 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 40 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 41 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 42 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 43 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 44 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 45 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 46 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 47 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[    0.000000] SRAT: Node 0 PXM 0 100000000-230000000
[    0.000000] SRAT: Node 1 PXM 1 230000000-42f000000
[    0.000000] NUMA: Allocated memnodemap from 13000 - 1b600
[    0.000000] NUMA: Using 20 for the hash shift.
[    0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[    0.000000]   NODE_DATA [000000000001b600 - 00000000000235ff]
[    0.000000]   bootmap [0000000000024000 -  0000000000069fff] pages 46
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0230000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 00016d95c4]    TEXT DATA BSS ==> [0001000000 - 00016d95c4]
[    0.000000]   #3 [003770d000 - 0037fef042]          RAMDISK ==> [003770d000 - 0037fef042]
[    0.000000]   #4 [0000099000 - 0000100000]    BIOS reserved ==> [0000099000 - 0000100000]
[    0.000000]   #5 [00016da000 - 00016da21b]              BRK ==> [00016da000 - 00016da21b]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
[    0.000000]   #8 [0000013000 - 000001b600]       MEMNODEMAP ==> [0000013000 - 000001b600]
[    0.000000] Bootmem setup node 1 0000000230000000-000000042f000000
[    0.000000]   NODE_DATA [0000000230000000 - 0000000230007fff]
[    0.000000]   bootmap [0000000230008000 -  0000000230047dff] pages 40
[    0.000000] (9 early reservations) ==> bootmem [0230000000 - 042f000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE
[    0.000000]   #2 [0001000000 - 00016d95c4]    TEXT DATA BSS
[    0.000000]   #3 [003770d000 - 0037fef042]          RAMDISK
[    0.000000]   #4 [0000099000 - 0000100000]    BIOS reserved
[    0.000000]   #5 [00016da000 - 00016da21b]              BRK
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE
[    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE
[    0.000000]   #8 [0000013000 - 000001b600]       MEMNODEMAP
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] [ffffea0007a80000-ffffea0007bfffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880001800000-ffff8800089fffff] on node 0
[    0.000000]  [ffffea0007c00000-ffffea000ebfffff] PMD -> [ffff880230200000-ffff8802371fffff] on node 1
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0042f000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x00000099
[    0.000000]     0: 0x00000100 -> 0x000cfe90
[    0.000000]     0: 0x00100000 -> 0x00230000
[    0.000000]     1: 0x00230000 -> 0x0042f000
[    0.000000] On node 0 totalpages: 2096665
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 117 pages reserved
[    0.000000]   DMA zone: 3804 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833224 pages, LIFO batch:31
[    0.000000]   Normal zone: 17024 pages used for memmap
[    0.000000]   Normal zone: 1228160 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 2093056
[    0.000000]   Normal zone: 28616 pages used for memmap
[    0.000000]   Normal zone: 2064440 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x21] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x23] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfe9e000
[    0.000000] PM: Registered nosave memory: 00000000cfe9e000 - 00000000cfea0000
[    0.000000] PM: Registered nosave memory: 00000000cfea0000 - 00000000cfeb2000
[    0.000000] PM: Registered nosave memory: 00000000cfeb2000 - 00000000cfee0000
[    0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:2
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008c00000 s90328 r8192 d24360 u262144
[    0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc:
  • 00 01 02 03 04 05 06 07 [1] 08 09 10 11 12 13 14 15

[    0.000000] Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 4129628
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=8dd2a566-ffaf-47ef-80e7-816958041332 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff880008dde000 - ffff88000cdde000
[    0.000000] software IO TLB at phys 0x8dde000 - 0xcdde000
[    0.000000] Memory: 16442880k/17547264k available (3083k kernel code, 788380k absent, 316004k reserved, 2048k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:536
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2400.119 MHz processor.
[    0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.19 BogoMIPS (lpj=8400384)
[    0.008022] Security Framework initialized
[    0.008025] SELinux:  Disabled at boot.
[    0.009269] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.017480] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.020307] Mount-cache hash table entries: 256
[    0.020416] Initializing cgroup subsys ns
[    0.020419] Initializing cgroup subsys cpuacct
[    0.020423] Initializing cgroup subsys devices
[    0.020425] Initializing cgroup subsys freezer
[    0.020426] Initializing cgroup subsys net_cls
[    0.020443] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.020445] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.020447] CPU 0/0x20 -> Node 0
[    0.020449] CPU: Physical Processor ID: 0
[    0.020450] CPU: Processor Core ID: 0
[    0.020452] mce: CPU supports 7 MCE banks
[    0.020463] Performance Events: AMD PMU driver.
[    0.020467] ... version:                0
[    0.020468] ... bit width:              48
[    0.020469] ... generic registers:      4
[    0.020470] ... value mask:             0000ffffffffffff
[    0.020472] ... max period:             00007fffffffffff
[    0.020473] ... fixed-purpose events:   0
[    0.020475] ... event mask:             000000000000000f
[    0.021209] ACPI: Core revision 20090903
[    0.032071] Setting APIC routing to physical flat
[    0.032329] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072446] CPU0: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.076001] Booting processor 1 APIC 0x21 ip 0x6000
[    0.012000] Initializing CPU#1
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 1/0x21 -> Node 0
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 1
[    0.160095] CPU1: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.160106] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.164080] Booting processor 2 APIC 0x22 ip 0x6000
[    0.012000] Initializing CPU#2
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 2/0x22 -> Node 0
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 2
[    0.252089] CPU2: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.252098] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.256058] Booting processor 3 APIC 0x23 ip 0x6000
[    0.012000] Initializing CPU#3
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 3/0x23 -> Node 0
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 3
[    0.344059] CPU3: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.344072] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.348056] Booting processor 4 APIC 0x24 ip 0x6000
[    0.012000] Initializing CPU#4
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 4/0x24 -> Node 0
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 4
[    0.436032] CPU4: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.436038] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[    0.440057] Booting processor 5 APIC 0x25 ip 0x6000
[    0.012000] Initializing CPU#5
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 5/0x25 -> Node 0
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 5
[    0.528085] CPU5: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.528099] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[    0.532057] Booting processor 6 APIC 0x26 ip 0x6000
[    0.012000] Initializing CPU#6
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 6/0x26 -> Node 0
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 6
[    0.620057] CPU6: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.620063] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[    0.624061] Booting processor 7 APIC 0x27 ip 0x6000
[    0.012000] Initializing CPU#7
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 7/0x27 -> Node 0
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 7
[    0.712028] CPU7: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.712046] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[    0.716080] Booting processor 8 APIC 0x28 ip 0x6000
[    0.012000] Initializing CPU#8
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 8/0x28 -> Node 1
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 0
[    0.804114] CPU8: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.804127] checking TSC synchronization [CPU#0 -> CPU#8]: passed.
[    0.808060] Booting processor 9 APIC 0x29 ip 0x6000
[    0.012000] Initializing CPU#9
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 9/0x29 -> Node 1
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 1
[    0.896070] CPU9: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.896081] checking TSC synchronization [CPU#0 -> CPU#9]: passed.
[    0.900061] Booting processor 10 APIC 0x2a ip 0x6000
[    0.012000] Initializing CPU#10
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 10/0x2a -> Node 1
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 2
[    0.988049] CPU10: AMD Opteron(TM) Processor 6272                  stepping 02
[    0.988055] checking TSC synchronization [CPU#0 -> CPU#10]: passed.
[    0.992072] Booting processor 11 APIC 0x2b ip 0x6000
[    0.012000] Initializing CPU#11
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 11/0x2b -> Node 1
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 3
[    1.080028] CPU11: AMD Opteron(TM) Processor 6272                  stepping 02
[    1.080034] checking TSC synchronization [CPU#0 -> CPU#11]: passed.
[    1.084071] Booting processor 12 APIC 0x2c ip 0x6000
[    0.012000] Initializing CPU#12
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 12/0x2c -> Node 1
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 4
[    1.172095] CPU12: AMD Opteron(TM) Processor 6272                  stepping 02
[    1.172100] checking TSC synchronization [CPU#0 -> CPU#12]: passed.
[    1.176066] Booting processor 13 APIC 0x2d ip 0x6000
[    0.012000] Initializing CPU#13
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 13/0x2d -> Node 1
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 5
[    1.264075] CPU13: AMD Opteron(TM) Processor 6272                  stepping 02
[    1.264080] checking TSC synchronization [CPU#0 -> CPU#13]: passed.
[    1.268068] Booting processor 14 APIC 0x2e ip 0x6000
[    0.012000] Initializing CPU#14
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 14/0x2e -> Node 1
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 6
[    1.356053] CPU14: AMD Opteron(TM) Processor 6272                  stepping 02
[    1.356066] checking TSC synchronization [CPU#0 -> CPU#14]: passed.
[    1.360074] Booting processor 15 APIC 0x2f ip 0x6000
[    0.012000] Initializing CPU#15
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[    0.012000] CPU 15/0x2f -> Node 1
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 7
[    1.448040] CPU15: AMD Opteron(TM) Processor 6272                  stepping 02
[    1.448046] checking TSC synchronization [CPU#0 -> CPU#15]: passed.
[    1.452025] Brought up 16 CPUs
[    1.452028] Total of 16 processors activated (67199.25 BogoMIPS).
[    1.456112] CPU0 attaching sched-domain:
[    1.456115]  domain 0: span 0-7 level MC
[    1.456117]   groups: group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0 cpus 1 group ffff880008c8fbf0 cpus 2 group ffff880008ccfbf0 cpus 3 group ffff880008d0fbf0 cpus 4 group ffff880008d4fbf0 cpus 5 group ffff880008d8fbf0 cpus 6 group ffff880008dcfbf0 cpus 7
[    1.456129]   domain 1: span 0-15 level NODE
[    1.456131]    groups: group ffff88022f0ee000 cpus 0-7 (cpu_power = 8192) group ffff88022f0ee060 cpus 8-15 (cpu_power = 8192)
[    1.456139] CPU1 attaching sched-domain:
[    1.456141]  domain 0: span 0-7 level MC
[    1.456142]   groups: group ffff880008c4fbf0 cpus 1 group ffff880008c8fbf0 cpus 2 group ffff880008ccfbf0 cpus 3 group ffff880008d0fbf0 cpus 4 group ffff880008d4fbf0 cpus 5 group ffff880008d8fbf0 cpus 6 group ffff880008dcfbf0 cpus 7 group ffff880008c0fbf0 cpus 0
[    1.456152]   domain 1: span 0-15 level NODE
[    1.456154]    groups: group ffff88022f0ee000 cpus 0-7 (cpu_power = 8192) group ffff88022f0ee060 cpus 8-15 (cpu_power = 8192)
[    1.456160] CPU2 attaching sched-domain:
[    1.456162]  domain 0: span 0-7 level MC
[    1.456163]   groups: group ffff880008c8fbf0 cpus 2 group ffff880008ccfbf0 cpus 3 group ffff880008d0fbf0 cpus 4 group ffff880008d4fbf0 cpus 5 group ffff880008d8fbf0 cpus 6 group ffff880008dcfbf0 cpus 7 group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0 cpus 1
[    1.456173]   domain 1: span 0-15 level NODE
[    1.456175]    groups: group ffff88022f0ee000 cpus 0-7 (cpu_power = 8192) group ffff88022f0ee060 cpus 8-15 (cpu_power = 8192)
[    1.456181] CPU3 attaching sched-domain:
[    1.456182]  domain 0: span 0-7 level MC
[    1.456184]   groups: group ffff880008ccfbf0 cpus 3 group ffff880008d0fbf0 cpus 4 group ffff880008d4fbf0 cpus 5 group ffff880008d8fbf0 cpus 6 group ffff880008dcfbf0 cpus 7 group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0 cpus 1 group ffff880008c8fbf0 cpus 2
[    1.456194]   domain 1: span 0-15 level NODE
[    1.456195]    groups: group ffff88022f0ee000 cpus 0-7 (cpu_power = 8192) group ffff88022f0ee060 cpus 8-15 (cpu_power = 8192)
[    1.456201] CPU4 attaching sched-domain:
[    1.456203]  domain 0: span 0-7 level MC
[    1.456204]   groups: group ffff880008d0fbf0 cpus 4 group ffff880008d4fbf0 cpus 5 group ffff880008d8fbf0 cpus 6 group ffff880008dcfbf0 cpus 7 group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0 cpus 1 group ffff880008c8fbf0 cpus 2 group ffff880008ccfbf0 cpus 3
[    1.456214]   domain 1: span 0-15 level NODE
[    1.456216]    groups: group ffff88022f0ee000 cpus 0-7 (cpu_power = 8192) group ffff88022f0ee060 cpus 8-15 (cpu_power = 8192)
[    1.456222] CPU5 attaching sched-domain:
[    1.456223]  domain 0: span 0-7 level MC
[    1.456225]   groups: group ffff880008d4fbf0 cpus 5 group ffff880008d8fbf0 cpus 6 group ffff880008dcfbf0 cpus 7 group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0 cpus 1 group ffff880008c8fbf0 cpus 2 group ffff880008ccfbf0 cpus 3 group ffff880008d0fbf0 cpus 4
[    1.456234]   domain 1: span 0-15 level NODE
[    1.456236]    groups: group ffff88022f0ee000 cpus 0-7 (cpu_power = 8192) group ffff88022f0ee060 cpus 8-15 (cpu_power = 8192)
[    1.456242] CPU6 attaching sched-domain:
[    1.456243]  domain 0: span 0-7 level MC
[    1.456245]   groups: group ffff880008d8fbf0 cpus 6 group ffff880008dcfbf0 cpus 7 group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0 cpus 1 group ffff880008c8fbf0 cpus 2 group ffff880008ccfbf0 cpus 3 group ffff880008d0fbf0 cpus 4 group ffff880008d4fbf0 cpus 5
[    1.456255]   domain 1: span 0-15 level NODE
[    1.456256]    groups: group ffff88022f0ee000 cpus 0-7 (cpu_power = 8192) group ffff88022f0ee060 cpus 8-15 (cpu_power = 8192)
[    1.456262] CPU7 attaching sched-domain:
[    1.456264]  domain 0: span 0-7 level MC
[    1.456265]   groups: group ffff880008dcfbf0 cpus 7 group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0 cpus 1 group ffff880008c8fbf0 cpus 2 group ffff880008ccfbf0 cpus 3 group ffff880008d0fbf0 cpus 4 group ffff880008d4fbf0 cpus 5 group ffff880008d8fbf0 cpus 6
[    1.456275]   domain 1: span 0-15 level NODE
[    1.456277]    groups: group ffff88022f0ee000 cpus 0-7 (cpu_power = 8192) group ffff88022f0ee060 cpus 8-15 (cpu_power = 8192)
[    1.456283] CPU8 attaching sched-domain:
[    1.456285]  domain 0: span 8-15 level MC
[    1.456286]   groups: group ffff88023740fbf0 cpus 8 group ffff88023744fbf0 cpus 9 group ffff88023748fbf0 cpus 10 group ffff8802374cfbf0 cpus 11 group ffff88023750fbf0 cpus 12 group ffff88023754fbf0 cpus 13 group ffff88023758fbf0 cpus 14 group ffff8802375cfbf0 cpus 15
[    1.456297]   domain 1: span 0-15 level NODE
[    1.456299]    groups: group ffff88042e05b000 cpus 8-15 (cpu_power = 8192) group ffff88042e05b060 cpus 0-7 (cpu_power = 8192)
[    1.456305] CPU9 attaching sched-domain:
[    1.456307]  domain 0: span 8-15 level MC
[    1.456308]   groups: group ffff88023744fbf0 cpus 9 group ffff88023748fbf0 cpus 10 group ffff8802374cfbf0 cpus 11 group ffff88023750fbf0 cpus 12 group ffff88023754fbf0 cpus 13 group ffff88023758fbf0 cpus 14 group ffff8802375cfbf0 cpus 15 group ffff88023740fbf0 cpus 8
[    1.456319]   domain 1: span 0-15 level NODE
[    1.456321]    groups: group ffff88042e05b000 cpus 8-15 (cpu_power = 8192) group ffff88042e05b060 cpus 0-7 (cpu_power = 8192)
[    1.456327] CPU10 attaching sched-domain:
[    1.456329]  domain 0: span 8-15 level MC
[    1.456330]   groups: group ffff88023748fbf0 cpus 10 group ffff8802374cfbf0 cpus 11 group ffff88023750fbf0 cpus 12 group ffff88023754fbf0 cpus 13 group ffff88023758fbf0 cpus 14 group ffff8802375cfbf0 cpus 15 group ffff88023740fbf0 cpus 8 group ffff88023744fbf0 cpus 9
[    1.456341]   domain 1: span 0-15 level NODE
[    1.456343]    groups: group ffff88042e05b000 cpus 8-15 (cpu_power = 8192) group ffff88042e05b060 cpus 0-7 (cpu_power = 8192)
[    1.456349] CPU11 attaching sched-domain:
[    1.456350]  domain 0: span 8-15 level MC
[    1.456352]   groups: group ffff8802374cfbf0 cpus 11 group ffff88023750fbf0 cpus 12 group ffff88023754fbf0 cpus 13 group ffff88023758fbf0 cpus 14 group ffff8802375cfbf0 cpus 15 group ffff88023740fbf0 cpus 8 group ffff88023744fbf0 cpus 9 group ffff88023748fbf0 cpus 10
[    1.456362]   domain 1: span 0-15 level NODE
[    1.456363]    groups: group ffff88042e05b000 cpus 8-15 (cpu_power = 8192) group ffff88042e05b060 cpus 0-7 (cpu_power = 8192)
[    1.456369] CPU12 attaching sched-domain:
[    1.456371]  domain 0: span 8-15 level MC
[    1.456372]   groups: group ffff88023750fbf0 cpus 12 group ffff88023754fbf0 cpus 13 group ffff88023758fbf0 cpus 14 group ffff8802375cfbf0 cpus 15 group ffff88023740fbf0 cpus 8 group ffff88023744fbf0 cpus 9 group ffff88023748fbf0 cpus 10 group ffff8802374cfbf0 cpus 11
[    1.456382]   domain 1: span 0-15 level NODE
[    1.456384]    groups: group ffff88042e05b000 cpus 8-15 (cpu_power = 8192) group ffff88042e05b060 cpus 0-7 (cpu_power = 8192)
[    1.456390] CPU13 attaching sched-domain:
[    1.456391]  domain 0: span 8-15 level MC
[    1.456393]   groups: group ffff88023754fbf0 cpus 13 group ffff88023758fbf0 cpus 14 group ffff8802375cfbf0 cpus 15 group ffff88023740fbf0 cpus 8 group ffff88023744fbf0 cpus 9 group ffff88023748fbf0 cpus 10 group ffff8802374cfbf0 cpus 11 group ffff88023750fbf0 cpus 12
[    1.456403]   domain 1: span 0-15 level NODE
[    1.456404]    groups: group ffff88042e05b000 cpus 8-15 (cpu_power = 8192) group ffff88042e05b060 cpus 0-7 (cpu_power = 8192)
[    1.456410] CPU14 attaching sched-domain:
[    1.456412]  domain 0: span 8-15 level MC
[    1.456413]   groups: group ffff88023758fbf0 cpus 14 group ffff8802375cfbf0 cpus 15 group ffff88023740fbf0 cpus 8 group ffff88023744fbf0 cpus 9 group ffff88023748fbf0 cpus 10 group ffff8802374cfbf0 cpus 11 group ffff88023750fbf0 cpus 12 group ffff88023754fbf0 cpus 13
[    1.456423]   domain 1: span 0-15 level NODE
[    1.456425]    groups: group ffff88042e05b000 cpus 8-15 (cpu_power = 8192) group ffff88042e05b060 cpus 0-7 (cpu_power = 8192)
[    1.456431] CPU15 attaching sched-domain:
[    1.456432]  domain 0: span 8-15 level MC
[    1.456434]   groups: group ffff8802375cfbf0 cpus 15 group ffff88023740fbf0 cpus 8 group ffff88023744fbf0 cpus 9 group ffff88023748fbf0 cpus 10 group ffff8802374cfbf0 cpus 11 group ffff88023750fbf0 cpus 12 group ffff88023754fbf0 cpus 13 group ffff88023758fbf0 cpus 14
[    1.456445]   domain 1: span 0-15 level NODE
[    1.456446]    groups: group ffff88042e05b000 cpus 8-15 (cpu_power = 8192) group ffff88042e05b060 cpus 0-7 (cpu_power = 8192)
[    1.456804] devtmpfs: initialized
[    1.462219] regulator: core version 0.5
[    1.462219] NET: Registered protocol family 16
[    1.462219] ACPI: bus type pci registered
[    1.462219] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    1.462219] PCI: MCFG area at e0000000 reserved in E820
[    1.469935] PCI: Using MMCONFIG at e0000000 - efffffff
[    1.469937] PCI: Using configuration type 1 for base access
[    1.470611] bio: create slab <bio-0> at 0
[    1.472464] ACPI: EC: Look up EC in DSDT
[    1.475048] ACPI: Executed 2 blocks of module-level executable AML code
[    1.486090] ACPI: Interpreter enabled
[    1.486092] ACPI: (supports S0 S1 S4 S5)
[    1.486111] ACPI: Using IOAPIC for interrupt routing
[    1.494293] ACPI: No dock devices found.
[    1.494454] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    1.494557] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    1.494560] pci 0000:00:02.0: PME# disabled
[    1.494603] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    1.494606] pci 0000:00:04.0: PME# disabled
[    1.494642] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    1.494644] pci 0000:00:09.0: PME# disabled
[    1.494676] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    1.494678] pci 0000:00:0a.0: PME# disabled
[    1.494724] pci 0000:00:11.0: reg 10 io port: [0x8000-0x8007]
[    1.494730] pci 0000:00:11.0: reg 14 io port: [0x7000-0x7003]
[    1.494736] pci 0000:00:11.0: reg 18 io port: [0x6000-0x6007]
[    1.494742] pci 0000:00:11.0: reg 1c io port: [0x5000-0x5003]
[    1.494748] pci 0000:00:11.0: reg 20 io port: [0x3000-0x300f]
[    1.494754] pci 0000:00:11.0: reg 24 32bit mmio: [0xfebfbc00-0xfebfbfff]
[    1.494769] pci 0000:00:11.0: set SATA to AHCI mode
[    1.494808] pci 0000:00:12.0: reg 10 32bit mmio: [0xfebf9000-0xfebf9fff]
[    1.494854] pci 0000:00:12.1: reg 10 32bit mmio: [0xfebfa000-0xfebfafff]
[    1.494916] pci 0000:00:12.2: reg 10 32bit mmio: [0xfebfb800-0xfebfb8ff]
[    1.494960] pci 0000:00:12.2: supports D1 D2
[    1.494962] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    1.494965] pci 0000:00:12.2: PME# disabled
[    1.494993] pci 0000:00:13.0: reg 10 32bit mmio: [0xfebf7000-0xfebf7fff]
[    1.495039] pci 0000:00:13.1: reg 10 32bit mmio: [0xfebf8000-0xfebf8fff]
[    1.495101] pci 0000:00:13.2: reg 10 32bit mmio: [0xfebfb400-0xfebfb4ff]
[    1.495145] pci 0000:00:13.2: supports D1 D2
[    1.495147] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    1.495150] pci 0000:00:13.2: PME# disabled
[    1.495249] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[    1.495255] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[    1.495261] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[    1.495285] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[    1.495291] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[    1.495405] pci 0000:00:14.5: reg 10 32bit mmio: [0xfebf6000-0xfebf6fff]
[    1.496191] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfbffffff]
[    1.496198] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd8000000-0xdfffffff]
[    1.496206] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xd4000000-0xd7ffffff]
[    1.496211] pci 0000:01:00.0: reg 24 io port: [0x9800-0x987f]
[    1.496215] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf9f80000-0xf9ffffff]
[    1.496262] pci 0000:01:00.1: reg 10 32bit mmio: [0xfdbfc000-0xfdbfffff]
[    1.504085] pci 0000:00:02.0: bridge io port: [0x9000-0x9fff]
[    1.504088] pci 0000:00:02.0: bridge 32bit mmio: [0xf9f00000-0xfdbfffff]
[    1.504092] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd4000000-0xdfffffff]
[    1.504119] pci 0000:02:00.0: reg 10 32bit mmio: [0xfdce0000-0xfdcfffff]
[    1.504147] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.504150] pci 0000:02:00.0: PME# disabled
[    1.512061] pci 0000:00:04.0: bridge io port: [0xa000-0xbfff]
[    1.512064] pci 0000:00:04.0: bridge 32bit mmio: [0xfdc00000-0xfdefffff]
[    1.512119] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
[    1.512123] pci 0000:03:01.0: PME# disabled
[    1.512186] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
[    1.512189] pci 0000:03:05.0: PME# disabled
[    1.512255] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
[    1.512258] pci 0000:03:07.0: PME# disabled
[    1.512332] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
[    1.512335] pci 0000:03:09.0: PME# disabled
[    1.512386] pci 0000:02:00.0: bridge io port: [0xa000-0xbfff]
[    1.512389] pci 0000:02:00.0: bridge 32bit mmio: [0xfdd00000-0xfdefffff]
[    1.512435] pci 0000:04:00.0: reg 10 64bit mmio: [0xfddfe000-0xfddfffff]
[    1.512501] pci 0000:04:00.0: PME# supported from D0 D3hot
[    1.512505] pci 0000:04:00.0: PME# disabled
[    1.520105] pci 0000:03:01.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[    1.520143] pci 0000:05:00.0: reg 10 io port: [0xa800-0xa807]
[    1.520149] pci 0000:05:00.0: reg 14 io port: [0xa400-0xa403]
[    1.520155] pci 0000:05:00.0: reg 18 io port: [0xb800-0xb807]
[    1.520160] pci 0000:05:00.0: reg 1c io port: [0xb400-0xb403]
[    1.520166] pci 0000:05:00.0: reg 20 io port: [0xb000-0xb00f]
[    1.520172] pci 0000:05:00.0: reg 24 32bit mmio: [0xfdeef800-0xfdeeffff]
[    1.520177] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xfdef0000-0xfdefffff]
[    1.520199] pci 0000:05:00.0: PME# supported from D3hot
[    1.520203] pci 0000:05:00.0: PME# disabled
[    1.528068] pci 0000:03:05.0: bridge io port: [0xa000-0xbfff]
[    1.528072] pci 0000:03:05.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[    1.528206] pci 0000:08:00.0: reg 10 32bit mmio: [0xfe9e0000-0xfe9fffff]
[    1.528220] pci 0000:08:00.0: reg 18 io port: [0xc800-0xc81f]
[    1.528229] pci 0000:08:00.0: reg 1c 32bit mmio: [0xfe9dc000-0xfe9dffff]
[    1.528286] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    1.528291] pci 0000:08:00.0: PME# disabled
[    1.536093] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
[    1.536096] pci 0000:00:09.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[    1.536147] pci 0000:09:00.0: reg 10 32bit mmio: [0xfeae0000-0xfeafffff]
[    1.536162] pci 0000:09:00.0: reg 18 io port: [0xd800-0xd81f]
[    1.536170] pci 0000:09:00.0: reg 1c 32bit mmio: [0xfeadc000-0xfeadffff]
[    1.536228] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[    1.536233] pci 0000:09:00.0: PME# disabled
[    1.544094] pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff]
[    1.544097] pci 0000:00:0a.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    1.544142] pci 0000:0a:03.0: reg 10 io port: [0xe800-0xe81f]
[    1.544193] pci 0000:0a:03.0: supports D1 D2
[    1.544235] pci 0000:0a:04.0: reg 10 32bit mmio pref: [0xf8000000-0xf8ffffff]
[    1.544242] pci 0000:0a:04.0: reg 14 32bit mmio: [0xfdffc000-0xfdffffff]
[    1.544249] pci 0000:0a:04.0: reg 18 32bit mmio: [0xfe000000-0xfe7fffff]
[    1.544337] pci 0000:00:14.4: transparent bridge
[    1.544340] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[    1.544344] pci 0000:00:14.4: bridge 32bit mmio: [0xfdf00000-0xfe7fffff]
[    1.544348] pci 0000:00:14.4: bridge 32bit mmio pref: [0xf8000000-0xf8ffffff]
[    1.544365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.544585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[    1.544642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
[    1.544705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
[    1.544758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
[    1.544833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    1.553795] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
[    1.553905] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15)
[    1.554022] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[    1.554131] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[    1.554251] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
[    1.554363] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[    1.554481] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[    1.554581] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    1.554676] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.554686] vgaarb: device added: PCI:0000:0a:04.0,decodes=io+mem,owns=none,locks=none
[    1.554688] vgaarb: loaded
[    1.554705] PCI: Using ACPI for IRQ routing
[    1.554705] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.554705] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    1.556903] Switching to clocksource tsc
[    1.557294] pnp: PnP ACPI init
[    1.557313] ACPI: bus type pnp registered
[    1.562392] pnp: PnP ACPI: found 15 devices
[    1.562394] ACPI: ACPI bus type pnp unregistered
[    1.562409] system 00:07: ioport range 0xa10-0xa1f has been reserved
[    1.562417] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    1.562420] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    1.562426] system 00:0a: ioport range 0xca2-0xca3 has been reserved
[    1.562428] system 00:0a: ioport range 0x550-0x551 has been reserved
[    1.562431] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    1.562433] system 00:0a: ioport range 0x40b-0x40b has been reserved
[    1.562435] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
[    1.562437] system 00:0a: ioport range 0xc00-0xc01 has been reserved
[    1.562440] system 00:0a: ioport range 0xc14-0xc14 has been reserved
[    1.562442] system 00:0a: ioport range 0xc50-0xc51 has been reserved
[    1.562444] system 00:0a: ioport range 0xc52-0xc52 has been reserved
[    1.562447] system 00:0a: ioport range 0xc6c-0xc6c has been reserved
[    1.562451] system 00:0a: ioport range 0xc6f-0xc6f has been reserved
[    1.562454] system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
[    1.562456] system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
[    1.562458] system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
[    1.562461] system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
[    1.562463] system 00:0a: ioport range 0xcd8-0xcdf has been reserved
[    1.562465] system 00:0a: ioport range 0x800-0x89f has been reserved
[    1.562468] system 00:0a: ioport range 0xb00-0xb0f has been reserved
[    1.562470] system 00:0a: ioport range 0xb20-0xb3f has been reserved
[    1.562473] system 00:0a: ioport range 0x900-0x90f has been reserved
[    1.562475] system 00:0a: ioport range 0x910-0x91f has been reserved
[    1.562477] system 00:0a: ioport range 0xfe00-0xfefe has been reserved
[    1.562481] system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
[    1.562483] system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
[    1.562489] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    1.562494] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    1.562496] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[    1.562498] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    1.562501] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[    1.562503] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
[    1.567523] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[    1.567526] pci 0000:00:02.0:   IO window: 0x9000-0x9fff
[    1.567529] pci 0000:00:02.0:   MEM window: 0xf9f00000-0xfdbfffff
[    1.567533] pci 0000:00:02.0:   PREFETCH window: 0x000000d4000000-0x000000dfffffff
[    1.567538] pci 0000:03:01.0: PCI bridge, secondary bus 0000:04
[    1.567540] pci 0000:03:01.0:   IO window: disabled
[    1.567544] pci 0000:03:01.0:   MEM window: 0xfdd00000-0xfddfffff
[    1.567547] pci 0000:03:01.0:   PREFETCH window: disabled
[    1.567552] pci 0000:03:05.0: PCI bridge, secondary bus 0000:05
[    1.567555] pci 0000:03:05.0:   IO window: 0xa000-0xbfff
[    1.567559] pci 0000:03:05.0:   MEM window: 0xfde00000-0xfdefffff
[    1.567562] pci 0000:03:05.0:   PREFETCH window: disabled
[    1.567566] pci 0000:03:07.0: PCI bridge, secondary bus 0000:06
[    1.567568] pci 0000:03:07.0:   IO window: disabled
[    1.567572] pci 0000:03:07.0:   MEM window: disabled
[    1.567574] pci 0000:03:07.0:   PREFETCH window: disabled
[    1.567579] pci 0000:03:09.0: PCI bridge, secondary bus 0000:07
[    1.567581] pci 0000:03:09.0:   IO window: disabled
[    1.567584] pci 0000:03:09.0:   MEM window: disabled
 

Оффлайн animegirl

  • Местный житель
  • ***
  • Сообщений: 175
Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #10 : 16 Апреля 2012, 21:41:46 »
Spoiler: ShowHide
[    1.567587] pci 0000:03:09.0:   PREFETCH window: disabled
[    1.567592] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[    1.567594] pci 0000:02:00.0:   IO window: 0xa000-0xbfff
[    1.567598] pci 0000:02:00.0:   MEM window: 0xfdd00000-0xfdefffff
[    1.567601] pci 0000:02:00.0:   PREFETCH window: disabled
[    1.567606] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[    1.567608] pci 0000:00:04.0:   IO window: 0xa000-0xbfff
[    1.567611] pci 0000:00:04.0:   MEM window: 0xfdc00000-0xfdefffff
[    1.567614] pci 0000:00:04.0:   PREFETCH window: disabled
[    1.567617] pci 0000:00:09.0: PCI bridge, secondary bus 0000:08
[    1.567619] pci 0000:00:09.0:   IO window: 0xc000-0xcfff
[    1.567622] pci 0000:00:09.0:   MEM window: 0xfe900000-0xfe9fffff
[    1.567624] pci 0000:00:09.0:   PREFETCH window: disabled
[    1.567628] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:09
[    1.567630] pci 0000:00:0a.0:   IO window: 0xd000-0xdfff
[    1.567651] pci 0000:00:0a.0:   MEM window: 0xfea00000-0xfeafffff
[    1.567654] pci 0000:00:0a.0:   PREFETCH window: disabled
[    1.567657] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0a
[    1.567660] pci 0000:00:14.4:   IO window: 0xe000-0xefff
[    1.567665] pci 0000:00:14.4:   MEM window: 0xfdf00000-0xfe7fffff
[    1.567668] pci 0000:00:14.4:   PREFETCH window: 0xf8000000-0xf8ffffff
[    1.567679]   alloc irq_desc for 18 on node -1
[    1.567681]   alloc kstat_irqs on node -1
[    1.567686] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.567690] pci 0000:00:02.0: setting latency timer to 64
[    1.567694]   alloc irq_desc for 16 on node -1
[    1.567696]   alloc kstat_irqs on node -1
[    1.567699] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.567701] pci 0000:00:04.0: setting latency timer to 64
[    1.567710] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.567713] pci 0000:02:00.0: setting latency timer to 64
[    1.567720]   alloc irq_desc for 17 on node -1
[    1.567721]   alloc kstat_irqs on node -1
[    1.567724] pci 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.567727] pci 0000:03:01.0: setting latency timer to 64
[    1.567733] pci 0000:03:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.567737] pci 0000:03:05.0: setting latency timer to 64
[    1.567743]   alloc irq_desc for 19 on node -1
[    1.567744]   alloc kstat_irqs on node -1
[    1.567747] pci 0000:03:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.567750] pci 0000:03:07.0: setting latency timer to 64
[    1.567756] pci 0000:03:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.567759] pci 0000:03:09.0: setting latency timer to 64
[    1.567764] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.567767] pci 0000:00:09.0: setting latency timer to 64
[    1.567772] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.567774] pci 0000:00:0a.0: setting latency timer to 64
[    1.567782] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.567784] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    1.567787] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
[    1.567789] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xfdbfffff]
[    1.567791] pci_bus 0000:01: resource 2 pref mem [0xd4000000-0xdfffffff]
[    1.567793] pci_bus 0000:02: resource 0 io:  [0xa000-0xbfff]
[    1.567795] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdefffff]
[    1.567798] pci_bus 0000:03: resource 0 io:  [0xa000-0xbfff]
[    1.567799] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfdefffff]
[    1.567802] pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff]
[    1.567804] pci_bus 0000:05: resource 0 io:  [0xa000-0xbfff]
[    1.567806] pci_bus 0000:05: resource 1 mem: [0xfde00000-0xfdefffff]
[    1.567808] pci_bus 0000:08: resource 0 io:  [0xc000-0xcfff]
[    1.567810] pci_bus 0000:08: resource 1 mem: [0xfe900000-0xfe9fffff]
[    1.567812] pci_bus 0000:09: resource 0 io:  [0xd000-0xdfff]
[    1.567814] pci_bus 0000:09: resource 1 mem: [0xfea00000-0xfeafffff]
[    1.567816] pci_bus 0000:0a: resource 0 io:  [0xe000-0xefff]
[    1.567818] pci_bus 0000:0a: resource 1 mem: [0xfdf00000-0xfe7fffff]
[    1.567820] pci_bus 0000:0a: resource 2 pref mem [0xf8000000-0xf8ffffff]
[    1.567822] pci_bus 0000:0a: resource 3 io:  [0x00-0xffff]
[    1.567824] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[    1.567863] NET: Registered protocol family 2
[    1.568266] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    1.570449] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.573203] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.573447] TCP: Hash tables configured (established 524288 bind 65536)
[    1.573449] TCP reno registered
[    1.573580] NET: Registered protocol family 1
[    2.369063] pci 0000:01:00.0: Boot video device
[    2.369196] Unpacking initramfs...
[    2.602253] Freeing initrd memory: 9096k freed
[    2.606243] audit: initializing netlink socket (disabled)
[    2.606254] type=2000 audit(1334593890.605:1): initialized
[    2.610530] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.612324] VFS: Disk quotas dquot_6.5.2
[    2.612370] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.612438] msgmni has been set to 32132
[    2.613072] alg: No test for stdrng (krng)
[    2.613117] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.613121] io scheduler noop registered
[    2.613123] io scheduler anticipatory registered
[    2.613125] io scheduler deadline registered
[    2.613177] io scheduler cfq registered (default)
[    2.613302]   alloc irq_desc for 24 on node -1
[    2.613304]   alloc kstat_irqs on node -1
[    2.613312] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[    2.613317] pcieport 0000:00:02.0: setting latency timer to 64
[    2.613379]   alloc irq_desc for 25 on node -1
[    2.613381]   alloc kstat_irqs on node -1
[    2.613385] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X
[    2.613389] pcieport 0000:00:04.0: setting latency timer to 64
[    2.613445]   alloc irq_desc for 26 on node -1
[    2.613447]   alloc kstat_irqs on node -1
[    2.613451] pcieport 0000:00:09.0: irq 26 for MSI/MSI-X
[    2.613455] pcieport 0000:00:09.0: setting latency timer to 64
[    2.613514]   alloc irq_desc for 27 on node -1
[    2.613515]   alloc kstat_irqs on node -1
[    2.613519] pcieport 0000:00:0a.0: irq 27 for MSI/MSI-X
[    2.613523] pcieport 0000:00:0a.0: setting latency timer to 64
[    2.613600]   alloc irq_desc for 28 on node -1
[    2.613601]   alloc kstat_irqs on node -1
[    2.613608] pcieport 0000:02:00.0: irq 28 for MSI/MSI-X
[    2.613614] pcieport 0000:02:00.0: setting latency timer to 64
[    2.613709]   alloc irq_desc for 29 on node -1
[    2.613710]   alloc kstat_irqs on node -1
[    2.613717] pcieport 0000:03:01.0: irq 29 for MSI/MSI-X
[    2.613723] pcieport 0000:03:01.0: setting latency timer to 64
[    2.613838]   alloc irq_desc for 30 on node -1
[    2.613839]   alloc kstat_irqs on node -1
[    2.613845] pcieport 0000:03:05.0: irq 30 for MSI/MSI-X
[    2.613851] pcieport 0000:03:05.0: setting latency timer to 64
[    2.613948]   alloc irq_desc for 31 on node -1
[    2.613950]   alloc kstat_irqs on node -1
[    2.613956] pcieport 0000:03:07.0: irq 31 for MSI/MSI-X
[    2.613962] pcieport 0000:03:07.0: setting latency timer to 64
[    2.614057]   alloc irq_desc for 32 on node -1
[    2.614058]   alloc kstat_irqs on node -1
[    2.614064] pcieport 0000:03:09.0: irq 32 for MSI/MSI-X
[    2.614070] pcieport 0000:03:09.0: setting latency timer to 64
[    2.615289] Linux agpgart interface v0.103
[    2.615337] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.615433] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.615530] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.615776] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.615902] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.616066] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    2.616116] PNP: No PS/2 controller found. Probing ports directly.
[    2.618928] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.618935] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.619042] mice: PS/2 mouse device common for all mice
[    2.619135] rtc_cmos 00:04: RTC can wake from S4
[    2.619135] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.619135] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.619143] cpuidle: using governor ladder
[    2.619145] cpuidle: using governor menu
[    2.619149] No iBFT detected.
[    2.619460] TCP cubic registered
[    2.619567] NET: Registered protocol family 10
[    2.620523] Mobile IPv6
[    2.620526] NET: Registered protocol family 17
[    2.620590] PM: Resume from disk failed.
[    2.620598] registered taskstats version 1
[    2.621223] rtc_cmos 00:04: setting system clock to 2012-04-16 16:31:31 UTC (1334593891)
[    2.621265] Initalizing network drop monitor service
[    2.621310] Freeing unused kernel memory: 592k freed
[    2.621439] Write protecting the kernel read-only data: 4244k
[    2.638132] udev[197]: starting version 164
[    2.667009] SCSI subsystem initialized
[    2.680931] usbcore: registered new interface driver usbfs
[    2.680972] usbcore: registered new interface driver hub
[    2.681020] usbcore: registered new device driver usb
[    2.685015] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[    2.685015] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    2.685015] e1000e 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.685015] e1000e 0000:08:00.0: setting latency timer to 64
[    2.685015]   alloc irq_desc for 33 on node -1
[    2.685015]   alloc kstat_irqs on node -1
[    2.685023] e1000e 0000:08:00.0: irq 33 for MSI/MSI-X
[    2.685025]   alloc irq_desc for 34 on node -1
[    2.685026]   alloc kstat_irqs on node -1
[    2.685030] e1000e 0000:08:00.0: irq 34 for MSI/MSI-X
[    2.685032]   alloc irq_desc for 35 on node -1
[    2.685034]   alloc kstat_irqs on node -1
[    2.685037] e1000e 0000:08:00.0: irq 35 for MSI/MSI-X
[    2.685183] e1000e 0000:08:00.0: Disabling ASPM L0s
[    2.701151] libata version 3.00 loaded.
[    2.702445] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.702535] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.702535] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    2.702537] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.702570] ehci_hcd 0000:00:12.2: debug port 1
[    2.702589] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfebfb800
[    2.704691] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.704739] xhci_hcd 0000:04:00.0: setting latency timer to 64
[    2.704743] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    2.704757] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    2.705176] xhci_hcd 0000:04:00.0: irq 17, io mem 0xfddfe000
[    2.708162] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[    2.708170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.708172] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.708174] usb usb2: Product: xHCI Host Controller
[    2.708176] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[    2.708177] usb usb2: SerialNumber: 0000:04:00.0
[    2.708260] usb usb2: configuration #1 chosen from 1 choice
[    2.708263] xHCI xhci_add_endpoint called for root hub
[    2.708265] xHCI xhci_check_bandwidth called for root hub
[    2.708289] hub 2-0:1.0: USB hub found
[    2.708296] hub 2-0:1.0: 4 ports detected
[    2.712905] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.713888] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.713911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.713914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.713916] usb usb1: Product: EHCI Host Controller
[    2.713918] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    2.713919] usb usb1: SerialNumber: 0000:00:12.2
[    2.713986] usb usb1: configuration #1 chosen from 1 choice
[    2.714009] hub 1-0:1.0: USB hub found
[    2.714016] hub 1-0:1.0: 6 ports detected
[    2.714106] ahci 0000:00:11.0: version 3.0
[    2.714122]   alloc irq_desc for 22 on node -1
[    2.714124]   alloc kstat_irqs on node -1
[    2.714130] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    2.714256] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.714259] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    2.714518] scsi0 : ahci
[    2.714622] scsi1 : ahci
[    2.714688] scsi2 : ahci
[    2.714751] scsi3 : ahci
[    2.715194] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22
[    2.715197] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22
[    2.715200] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22
[    2.715203] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22
[    2.715300] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.715256] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.715329] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    2.715307]   alloc irq_desc for 36 on node -1
[    2.715312]   alloc kstat_irqs on node -1
[    2.715323] ahci 0000:05:00.0: irq 36 for MSI/MSI-X
[    2.715364] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.715368] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    2.715459] scsi4 : pata_atiixp
[    2.715375] ahci 0000:05:00.0: setting latency timer to 64
[    2.715557] scsi5 : pata_atiixp
[    2.715599] scsi6 : ahci
[    2.715676] scsi7 : ahci
[    2.715723] ata7: SATA max UDMA/133 abar m2048@0xfdeef800 port 0xfdeef900 irq 36
[    2.715726] ata8: SATA max UDMA/133 abar m2048@0xfdeef800 port 0xfdeef980 irq 36
[    2.716971] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    2.716973] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    2.717094] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.717117] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    2.717130] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    2.717163] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfebf9000
[    2.780770] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.780773] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.780775] usb usb3: Product: OHCI Host Controller
[    2.780777] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    2.780779] usb usb3: SerialNumber: 0000:00:12.0
[    2.780861] usb usb3: configuration #1 chosen from 1 choice
[    2.780887] hub 3-0:1.0: USB hub found
[    2.780898] hub 3-0:1.0: 3 ports detected
[    2.780997] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.781018] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.781028] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    2.781056] ehci_hcd 0000:00:13.2: debug port 1
[    2.781077] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfebfb400
[    2.792031] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.792045] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.792047] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.792049] usb usb4: Product: EHCI Host Controller
[    2.792051] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    2.792052] usb usb4: SerialNumber: 0000:00:13.2
[    2.792112] usb usb4: configuration #1 chosen from 1 choice
[    2.792137] hub 4-0:1.0: USB hub found
[    2.792143] hub 4-0:1.0: 6 ports detected
[    2.792239] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.792257] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    2.792266] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 5
[    2.792282] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfebfa000
[    2.799391] e1000e 0000:08:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:25:90:4b:81:bc
[    2.799394] e1000e 0000:08:00.0: eth0: Intel(R) PRO/1000 Network Connection
[    2.799465] e1000e 0000:08:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF
[    2.799490] e1000e 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.799514] e1000e 0000:09:00.0: setting latency timer to 64
[    2.799666]   alloc irq_desc for 37 on node -1
[    2.799668]   alloc kstat_irqs on node -1
[    2.799673] e1000e 0000:09:00.0: irq 37 for MSI/MSI-X
[    2.799675]   alloc irq_desc for 38 on node -1
[    2.799676]   alloc kstat_irqs on node -1
[    2.799679] e1000e 0000:09:00.0: irq 38 for MSI/MSI-X
[    2.799680]   alloc irq_desc for 39 on node -1
[    2.799682]   alloc kstat_irqs on node -1
[    2.799684] e1000e 0000:09:00.0: irq 39 for MSI/MSI-X
[    2.800123] e1000e 0000:09:00.0: Disabling ASPM L0s
[    2.851613] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.851616] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.851618] usb usb5: Product: OHCI Host Controller
[    2.851619] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    2.851621] usb usb5: SerialNumber: 0000:00:12.1
[    2.851681] usb usb5: configuration #1 chosen from 1 choice
[    2.851707] hub 5-0:1.0: USB hub found
[    2.851719] hub 5-0:1.0: 3 ports detected
[    2.851769] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.851788] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.851794] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[    2.851817] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfebf7000
[    2.912764] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.912766] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.912768] usb usb6: Product: OHCI Host Controller
[    2.912770] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    2.912771] usb usb6: SerialNumber: 0000:00:13.0
[    2.912829] usb usb6: configuration #1 chosen from 1 choice
[    2.912852] hub 6-0:1.0: USB hub found
[    2.912863] hub 6-0:1.0: 3 ports detected
[    2.912912] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.912927] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    2.912934] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 7
[    2.912950] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfebf8000
[    2.916914] e1000e 0000:09:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:25:90:4b:81:bd
[    2.916917] e1000e 0000:09:00.0: eth1: Intel(R) PRO/1000 Network Connection
[    2.916988] e1000e 0000:09:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF
[    2.972764] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.972767] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.972769] usb usb7: Product: OHCI Host Controller
[    2.972770] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    2.972772] usb usb7: SerialNumber: 0000:00:13.1
[    2.972830] usb usb7: configuration #1 chosen from 1 choice
[    2.972853] hub 7-0:1.0: USB hub found
[    2.972861] hub 7-0:1.0: 3 ports detected
[    2.972905] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.972920] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    2.972926] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[    2.972941] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfebf6000
[    3.032050] ata3: SATA link down (SStatus 0 SControl 300)
[    3.032054] ata1: SATA link down (SStatus 0 SControl 300)
[    3.032074] ata2: SATA link down (SStatus 0 SControl 300)
[    3.032094] ata8: SATA link down (SStatus 0 SControl 330)
[    3.032097] ata4: SATA link down (SStatus 0 SControl 300)
[    3.032764] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    3.032767] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.032769] usb usb8: Product: OHCI Host Controller
[    3.032770] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    3.032772] usb usb8: SerialNumber: 0000:00:14.5
[    3.032824] usb usb8: configuration #1 chosen from 1 choice
[    3.032849] hub 8-0:1.0: USB hub found
[    3.032860] hub 8-0:1.0: 2 ports detected
[    3.196037] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    3.205522] ata7.00: ATA-8: WDC WD6000HLHX-01JJPV0, 04.05G04, max UDMA/133
[    3.205525] ata7.00: 1172123568 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.207894] ata7.00: configured for UDMA/133
[    3.208036] scsi 6:0:0:0: Direct-Access     ATA      WDC WD6000HLHX-0 04.0 PQ: 0 ANSI: 5
[    3.381412] sd 6:0:0:0: [sda] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
[    3.381457] sd 6:0:0:0: [sda] Write Protect is off
[    3.381459] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.381476] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled GSI 17 (level, low) -, doesn't support DPO or FUA
[    3.381593]  sda: sda1 sda2 sda3 < sda5 >
[    3.403960] sd 6:0:0:0: [sda] Attached SCSI disk
[    3.404388] usb 3-1: new full speed USB device using ohci_hcd and address 2
[    3.584825] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[    3.584828] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.584831] usb 3-1: Product: USB Receiver
[    3.584833] usb 3-1: Manufacturer: Logitech
[    3.584902] usb 3-1: configuration #1 chosen from 1 choice
[    3.597619] usbcore: registered new interface driver hiddev
[    3.600034] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input1
[    3.600078] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
[    3.605096] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input2
[    3.605279] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
[    3.613886] generic-usb 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input2
[    3.613907] usbcore: registered new interface driver usbhid
[    3.613910] usbhid: v2.6:USB HID core driver
[    3.696362] PM: Starting manual resume from disk
[    3.696365] PM: Resume from partition 8:1
[    3.696367] PM: Checking hibernation image.
[    3.696509] PM: Error -22 checking image file
[    3.696511] PM: Resume from disk failed.
[    3.729656] EXT4-fs (sda2): mounted filesystem with ordered data mode
[    3.860157] usb 3-2: new full speed USB device using ohci_hcd and address 3
[    4.034837] usb 3-2: New USB device found, idVendor=046d, idProduct=c068
[    4.034841] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.034843] usb 3-2: Product: G500
[    4.034844] usb 3-2: Manufacturer: Logitech
[    4.034846] usb 3-2: SerialNumber: 0B629175360018
[    4.034913] usb 3-2: configuration #1 chosen from 1 choice
[    4.044983] input: Logitech G500 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3
[    4.045029] generic-usb 0003:046D:C068.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:12.0-2/input0
[    4.056946] input: Logitech G500 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input4
[    4.057003] generic-usb 0003:046D:C068.0005: input,hiddev2,hidraw4: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:12.0-2/input1
[    4.168033] usb 4-2: new high speed USB device using ehci_hcd and address 2
[    4.308070] usb 4-2: New USB device found, idVendor=05e3, idProduct=0723
[    4.308073] usb 4-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[    4.308076] usb 4-2: Product: USB Storage
[    4.308078] usb 4-2: Manufacturer: Generic
[    4.308142] usb 4-2: configuration #1 chosen from 1 choice
[    4.496974] udev[523]: starting version 164
[    4.581069] Initializing USB Mass Storage driver...
[    4.581386] scsi8 : SCSI emulation for USB Mass Storage devices
[    4.581474] usb-storage: device found at 2
[    4.581476] usb-storage: waiting for device to settle before scanning
[    4.581492] usbcore: registered new interface driver usb-storage
[    4.581495] USB Mass Storage support registered.
[    4.680020] usb 6-3: new full speed USB device using ohci_hcd and address 2
[    4.687670] processor LNXCPU:00: registered as cooling_device0
[    4.690934] processor LNXCPU:01: registered as cooling_device1
[    4.694066] processor LNXCPU:02: registered as cooling_device2
[    4.697249] processor LNXCPU:03: registered as cooling_device3
[    4.700424] processor LNXCPU:04: registered as cooling_device4
[    4.703172] processor LNXCPU:05: registered as cooling_device5
[    4.706736] processor LNXCPU:06: registered as cooling_device6
[    4.709886] processor LNXCPU:07: registered as cooling_device7
[    4.713034] processor LNXCPU:08: registered as cooling_device8
[    4.716207] processor LNXCPU:09: registered as cooling_device9
[    4.719292] processor LNXCPU:0a: registered as cooling_device10
[    4.722645] processor LNXCPU:0b: registered as cooling_device11
[    4.725863] processor LNXCPU:0c: registered as cooling_device12
[    4.729006] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    4.729006] ACPI: Power Button [PWRB]
[    4.729285] processor LNXCPU:0d: registered as cooling_device13
[    4.729389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    4.729538] ACPI: Power Button [PWRF]
[    4.732331] processor LNXCPU:0e: registered as cooling_device14
[    4.735511] processor LNXCPU:0f: registered as cooling_device15
[    4.780465] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    4.817232] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.848434] [drm] Initialized drm 1.1.0 20060810
[    4.899197] usb 6-3: New USB device found, idVendor=0557, idProduct=2221
[    4.899200] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.899202] usb 6-3: Product: Hermon USB hidmouse Device
[    4.899204] usb 6-3: Manufacturer: Winbond Electronics Corp
[    4.899277] usb 6-3: configuration #1 chosen from 1 choice
[    4.905343] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.0/input/input8
[    4.905477] generic-usb 0003:0557:2221.0006: input,hidraw5: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input0
[    4.909332] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.1/input/input9
[    4.909429] generic-usb 0003:0557:2221.0007: input,hidraw6: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input1
[    4.975409] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.975414] nouveau 0000:01:00.0: setting latency timer to 64
[    4.978318] [drm] nouveau 0000:01:00.0: Unsupported chipset 0x0ce080a1
[    4.978439] nouveau 0000:01:00.0: PCI INT A disabled
[    4.978439] nouveau: probe of 0000:01:00.0 failed with error -22
[    5.505352] Adding 16777208k swap on /dev/sda1.  Priority:-1 extents:1 across:16777208k
[    5.632701] loop: module loaded
[    5.818382] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    6.801132] fuse init (API version 7.13)
[    8.805881] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.881932] ADDRCONF(NETDEV_UP): eth1: link is not ready
[    9.581908] usb-storage: device scan complete
[    9.582984] scsi 8:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
[    9.586873] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[   10.338179] Bluetooth: Core ver 2.15
[   10.338311] NET: Registered protocol family 31
[   10.338314] Bluetooth: HCI device and connection manager initialized
[   10.338317] Bluetooth: HCI socket layer initialized
[   10.361382] Bluetooth: L2CAP ver 2.14
[   10.361384] Bluetooth: L2CAP socket layer initialized
[   10.364832] Bluetooth: RFCOMM TTY layer initialized
[   10.364838] Bluetooth: RFCOMM socket layer initialized
[   10.364840] Bluetooth: RFCOMM ver 1.11
[   10.380764] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.380766] Bluetooth: BNEP filters: protocol multicast
[   10.400032] Bridge firewalling registered
[   10.414017] Bluetooth: SCO (Voice Link) ver 0.6
[   10.414019] Bluetooth: SCO socket layer initialized
[   10.432885] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   10.432888] e1000e 0000:08:00.0: eth0: 10/100 speed: disabling TSO
[   10.434624] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.674023] lp: driver loaded but no devices found
[   10.718923] ppdev: user-space parallel port driver
[   20.584084] eth0: no IPv6 routers present
[   98.540096] usb 4-1: new high speed USB device using ehci_hcd and address 4
[   98.692220] usb 4-1: New USB device found, idVendor=152e, idProduct=2507
[   98.692225] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   98.692229] usb 4-1: Product: Super Multi Rewriter
[   98.692232] usb 4-1: Manufacturer: HLDS Inc.
[   98.692235] usb 4-1: SerialNumber: P01060723040352
[   98.692371] usb 4-1: configuration #1 chosen from 1 choice
[   98.692907] scsi9 : SCSI emulation for USB Mass Storage devices
[   98.693006] usb-storage: device found at 4
[   98.693008] usb-storage: waiting for device to settle before scanning
[  103.692432] usb-storage: device scan complete
[  103.729612] scsi 9:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-E10L  LE05 PQ: 0 ANSI: 0
[  103.777903] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[  103.777906] Uniform CD-ROM driver Revision: 3.20
[  103.777995] sr 9:0:0:0: Attached scsi CD-ROM sr0
[  103.795514] sd 6:0:0:0: Attached scsi generic sg0 type 0
[  103.795810] sd 8:0:0:0: Attached scsi generic sg1 type 0
[  103.795810] sr 9:0:0:0: Attached scsi generic sg2 type 5
[  125.064365] ISO 9660 Extensions: Microsoft Joliet Level 3
[  125.068596] ISOFS: changing to secondary root
[  347.988276] operapluginwrap[2766]: segfault at 0 ip (null) sp 00007fffe21ddb58 error 14 in operapluginwrapper-native[400000+3c000]
[  348.091491] operapluginwrap[2830]: segfault at 0 ip (null) sp 00007fff14f2c5f8 error 14 in operapluginwrapper-native[400000+3c000]
[  348.108883] operapluginwrap[2846]: segfault at 0 ip (null) sp 00007fff16cd00b8 error 14 in operapluginwrapper-native[400000+3c000]
[  348.126213] operapluginwrap[2862]: segfault at 0 ip (null) sp 00007fff3cc2e1e8 error 14 in operapluginwrapper-native[400000+3c000]


Сообщение объединено: 17 Апреля 2012, 10:55:20
При старте успела заметить такую строчку:
Sound..... Failed, no Kernel Modules detected
« Последнее редактирование: 17 Апреля 2012, 10:55:20 от animegirl »
 

Оффлайн Brainey

Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #11 : 17 Апреля 2012, 15:03:27 »
Sound..... Failed, no Kernel Modules detected
А что выдает на команду
# modprobe snd-ca0106?
Конференция форума в jabber: debianforum@conference.jabber.ru | Клуб кедоводов: kde@conference.jabber.ru
 

Оффлайн animegirl

  • Местный житель
  • ***
  • Сообщений: 175
Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #12 : 17 Апреля 2012, 15:07:08 »
server@localhost:~$ modprobe snd-ca0106
bash: modprobe: command not found
 

Оффлайн Brainey

Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #13 : 17 Апреля 2012, 15:16:21 »
animegirl, знак # значит, что команду надо вводить с правами root
Конференция форума в jabber: debianforum@conference.jabber.ru | Клуб кедоводов: kde@conference.jabber.ru
 

Оффлайн calambus

Re: Creative Sound Blaster 5.1 VX вместо звука выдаёт шум
« Ответ #14 : 17 Апреля 2012, 15:21:09 »
animegirl , установите HWinfo :
#  aptitude install hwinfo -yи вылложите под [Sp]ойлер :
# hwinfo --sound
« Последнее редактирование: 17 Апреля 2012, 15:54:08 от calambus »
 

Теги:
     

    Настройка принтера Canon LBP6000

    Автор il_art

    Ответов: 0
    Просмотров: 5312
    Последний ответ 07 Января 2013, 17:09:22
    от il_art
    Подключение и настройка принтера Canon LBP6000B

    Автор oiler1979

    Ответов: 4
    Просмотров: 4179
    Последний ответ 02 Марта 2017, 15:49:55
    от oermolaev
    Настройка touchpad на acer c720 (Chromebook)

    Автор vitalygovor777

    Ответов: 7
    Просмотров: 2810
    Последний ответ 05 Января 2015, 11:33:02
    от Malaheenee
    Настройка AMDGPU

    Автор dolb

    Ответов: 8
    Просмотров: 2648
    Последний ответ 22 Февраля 2020, 15:46:50
    от dolb
    Замена сетевой карты: нужна ли настройка, если и так работает?

    Автор Листик

    Ответов: 3
    Просмотров: 944
    Последний ответ 30 Апреля 2021, 08:20:36
    от Листик