Автор Тема: Как подключиться к ноутбуку через точку доступа Wi-Fi  (Прочитано 7070 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн koljan8115

Имееется следующая комплектация: 1 смартфон/коммуникатор Samsung Galaxy Gio (GT-S5660), 1 телефон Nokia C3-01, один ноутбук Aser Aspire 6930G. Если в смартфоне включить Mobile AP(Настройки -> Беспроводные сети -> Модем и точка доступа -> Mobile AP), а на телефоне включить WLAN и произвести поиск сетей томожно подключиться к интернету через точку доступа смартфона. А теперь вопрос: как реализовать, чтобы точка доступа была на ноутбуке а с телефона и смарфона к ней подключаться ивыходить в интернет? Если нужны какие-нибудь выводы команд или что-нибудь еще спрашивайте.
 

Оффлайн kobzar

если ноут в нет смотрит хвостом - тогда очень просто (iptables + NAT)  + танцы с вафлей.
Если инет получает инет по вайле то никак наверное.
Есть еще один очень правильный вариант.. купить себе недорогой роутер.. но вам он наверное не подходит ?
Ты дорого мой друг, заплатишь за ошибку,..
Когда оскал мой милый, ты приймешь за улыбку.
 

Оффлайн koljan8115

Ноутбук подключается к интернету с помощью 3G USB-модема. Я хочу чтобы этот самый интернет можно было раздавать на другие устройства через Wi-Fi.
Цитировать
если ноут в нет смотрит хвостом - тогда очень просто (iptables + NAT)  + танцы с вафлей.
Что тут имеется ввиду. Если установлен ли iptables,  то да.
#aptitude show iptables
Spoiler: ShowHide

Пакет: iptables                                 
Состояние: установлен
Автоматически установлен: нет
Версия: 1.4.8-3
Приоритет: важный
Раздел: net
Сопровождающий: Laurence J. Lane <ljlane@debian.org>
Размер в распакованном виде: 1 147 k
Зависимости: libc6 (>= 2.7), libnfnetlink0 (>= 1.0.0)
Описание: утилиты администрирования пакетной фильтрации и NAT
 В пакете содержатся утилиты настройки компонентов ядра Linux netfilter и iptables из оболочки командной строки. netfilter и iptables предоставляют инфраструктуру для
 фильтрации пакетов с учётом состояния передачи и без, трансляции портов адресов и для других операций с IP-пакетами.
 
 netfilter и iptables применяется в таких случаях как: общее подключение к Интернет, межсетевые экраны, учёт IP-трафика, «прозрачное» проксирование, сложная
 маршрутизация и управление трафиком.

Что такое NAT не знаю, искал в интернете вроде этим вопросом(Что такое NAT?) все и задаются, дается ответ, но для меня это так и осталось темным лесом.
Если же имеется ввиду через Network Manager  создать беспроводное подключение Wi Fi, пробовал но тогда ыходит что смартфон раздает интернет, а мне надо что бы интернет раздавал ноутбук(и это возможно, если это получалось на Ubuntu, получиться и на Debian'e), вопрос в том как это сделать?
Купить wifi роутер не предлагать.
« Последнее редактирование: 20 Август 2012, 19:23:38 от koljan8115 »
 

Оффлайн Alexey_F

  • Местный житель
  • ***
  • Сообщений: 153
 

Оффлайн xbsd

на сколько я понял задачу, проблема не в том, как раздать интернеты на машине с debain, а как эту машину сделать точкой доступа...
хотя могу и ощибаться ^^
 

Оффлайн Alexey_F

  • Местный житель
  • ***
  • Сообщений: 153
опять гугл

man hostapd

Spoiler: ShowHide
$ aptitude show hostapd
Пакет: hostapd                                   
Состояние: не установлен
Версия: 1:0.6.10-2
Приоритет: необязательный
Раздел: net
Сопровождающий: Debian/Ubuntu wpasupplicant Maintainers <pkg-wpa-devel@lists.alioth.debian.org>
Размер в распакованном виде: 877 k
Зависимости: libc6 (>= 2.3), libnl1 (>= 1.1), libssl0.9.8 (>= 0.9.8k-1), lsb-base (>= 3.2-13)
Описание: программная точка доступа IEEE 802.11 с аутентификацией по IEEE 802.1X/WPA/WPA2/EAP
 Служба, позволяющая сделать из компьютера точку доступа Wi-Fi. Изначально, hostapd являлся необязательным компонентом драйвера точки доступа, работавшем в
 пользовательском пространстве. Он расширяет возможности базового управления IEEE 802.11 драйвера ядра: открытие доступа по MAC-адресам адаптеров с помощью
 внешней службы RADIUS, аутентификация по IEEE 802.1X и динамические ключи WEP, учёт в RADIUS, аутентификация по WPA/WPA2 (IEEE 802.11i/RSN) и динамические
 ключи TKIP/CCMP.
 
 Текущая версия включает поддержку для других драйверов, встроенное средство проверки по EAP (т.е., предоставляет все действия по аутентификации без
 внешнего сервера аутентификации RADIUS) и сервера аутентификации RADIUS для аутентификации EAP.
 
 hostapd работает со следующими драйверами:
 
 * драйверы на основе mac80211 с поддержкой мастер-режима
 * драйвер Host AP для Prism2/2.5/3,
 * madwifi для карт на чипсете Atheros (ar521x),
 * любой драйвер проводного Ethernet для идентификации IEEE 802.1X.
Сайт: http://w1.fi/


И да, будет не лишним проверить, может ли чип в ноутбуке работать в режиме master.
Spoiler: ShowHide
Что такое режим master? - man iwconfig
       mode   Set the operating mode of the device, which depends on the network topology. The mode can be Ad-Hoc (network composed of only one cell and
              without Access Point), Managed (node connects to a network composed of many Access Points, with roaming), Master (the node is the synchro?
              nisation master or acts as an Access Point), Repeater (the node forwards packets between other wireless nodes), Secondary (the  node  acts
              as  a  backup  master/repeater),  Monitor (the node is not associated with any cell and passively monitor all packets on the frequency) or
              Auto.
              Example :
                   iwconfig eth0 mode Managed
                   iwconfig eth0 mode Ad-Hoc
Master (the node is the synchronisation master or acts as an Access Point)


 

Оффлайн Malaheenee

А также не чип ли это Интел 3945. Если он - ничего не выйдет, хоть затанцуйтесь с бубном...
Все мы где-то, когда-то и в чем-то были новичками.
 

Оффлайн koljan8115

# dmesg
Spoiler: ShowHide

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:01:19 UTC 2012
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf8b1000 (usable)
[    0.000000]  BIOS-e820: 00000000bf8b1000 - 00000000bf8b7000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf8b7000 - 00000000bf9ba000 (usable)
[    0.000000]  BIOS-e820: 00000000bf9ba000 - 00000000bfa0f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
[    0.000000]  BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable)
[    0.000000]  BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfd1f000 - 00000000bfd64000 (usable)
[    0.000000]  BIOS-e820: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfd9f000 - 00000000bfde2000 (usable)
[    0.000000]  BIOS-e820: 00000000bfde2000 - 00000000bfdfd000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfdfd000 - 00000000bfe00000 (usable)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037000000 page 2M
[    0.000000]  0037000000 - 00373fe000 page 4k
[    0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[    0.000000] RAMDISK: 375f5000 - 37fef314
[    0.000000] Allocated new RAMDISK: 00100000 - 00afa314
[    0.000000] Move RAMDISK from 00000000375f5000 - 0000000037fef313 to 00100000 - 00afa313
[    0.000000] ACPI: RSDP 000f7580 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT bfdf4453 0007C (v01 ACRSYS ACRPRDCT 06040000  LTP 00000000)
[    0.000000] ACPI: FACP bfde6000 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT bfde7000 08516 (v02 Intel  CANTIGA  06040000 INTL 20061109)
[    0.000000] ACPI: FACS bfd9efc0 00040
[    0.000000] ACPI: HPET bfdfcd1b 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG bfdfcd53 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: APIC bfdfcd8f 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT bfdfcdf7 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC bfdfce1f 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000)
[    0.000000] ACPI: ASF! bfdfcf95 0006B (v32 OEMID  OEMTBL   06040000 PTL  00000001)
[    0.000000] ACPI: SSDT bfdf44f7 001A6 (v01 SataRe SataAhci 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT bfde5000 00655 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT bfde4000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT bfde3000 0020F (v01  PmRef    ApTst 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2186MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 0 - 373fe000
[    0.000000]   node 0 low ram: 00000000 - 373fe000
[    0.000000]   node 0 bootmap 00009000 - 0000fe80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00014ccd2c]    TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[    0.000000]   #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
[    0.000000]   #5 [00014cd000 - 00014d3160]              BRK ==> [00014cd000 - 00014d3160]
[    0.000000]   #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
[    0.000000]   #7 [0000100000 - 0000afa314]      NEW RAMDISK ==> [0000100000 - 0000afa314]
[    0.000000]   #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
[    0.000000] found SMP MP-table at [c00f7660] f7660
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x000bfe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[8] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bf8b1
[    0.000000]     0: 0x000bf8b7 -> 0x000bf9ba
[    0.000000]     0: 0x000bfa0f -> 0x000bfb08
[    0.000000]     0: 0x000bfd0f -> 0x000bfd18
[    0.000000]     0: 0x000bfd1f -> 0x000bfd64
[    0.000000]     0: 0x000bfd9f -> 0x000bfde2
[    0.000000]     0: 0x000bfdfd -> 0x000bfe00
[    0.000000] On node 0 totalpages: 785120
[    0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3967 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4373 pages used for memmap
[    0.000000]   HighMem zone: 554542 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at bfe00000 (gap: bfe00000:40200000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34328 r0 d23016 u2097152
[    0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc:
  • 0 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 778979
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=593519f2-c9a5-4972-bc1d-3fe43a3f38cd ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000373fe:000bfe00)
[    0.000000] Memory: 3098700k/3143680k available (2506k kernel code, 40748k reserved, 1326k data, 380k init, 2235660k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd56000 - 0xfffff000   (2724 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.000000]       .init : 0xc13bf000 - 0xc141e000   ( 380 kB)
[    0.000000]       .data : 0xc1272b8b - 0xc13be4c4   (1326 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1272b8b   (2506 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1280
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2260.864 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.72 BogoMIPS (lpj=9043456)
[    0.004017] Security Framework initialized
[    0.004022] SELinux:  Disabled at boot.
[    0.004027] Mount-cache hash table entries: 512
[    0.004128] Initializing cgroup subsys ns
[    0.004131] Initializing cgroup subsys cpuacct
[    0.004134] Initializing cgroup subsys devices
[    0.004136] Initializing cgroup subsys freezer
[    0.004138] Initializing cgroup subsys net_cls
[    0.004158] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004160] CPU: L2 cache: 3072K
[    0.004162] CPU: Physical Processor ID: 0
[    0.004163] CPU: Processor Core ID: 0
[    0.004167] mce: CPU supports 6 MCE banks
[    0.004174] CPU0: Thermal monitoring enabled (TM2)
[    0.004177] using mwait in idle threads.
[    0.004182] Performance Events: Core2 events, Intel PMU driver.
[    0.004187] ... version:                2
[    0.004189] ... bit width:              40
[    0.004190] ... generic registers:      2
[    0.004191] ... value mask:             000000ffffffffff
[    0.004193] ... max period:             000000007fffffff
[    0.004194] ... fixed-purpose events:   3
[    0.004196] ... event mask:             0000000700000003
[    0.004199] Checking 'hlt' instruction... OK.
[    0.021066] ACPI: Core revision 20090903
[    0.030909] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.031222] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070909] CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
[    0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 3072K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.156082] CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
[    0.156089] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.160042] Brought up 2 CPUs
[    0.160044] Total of 2 processors activated (9043.69 BogoMIPS).
[    0.161105] CPU0 attaching sched-domain:
[    0.161109]  domain 0: span 0-1 level MC
[    0.161111]   groups: group c3003778 cpus 0 group c3203778 cpus 1
[    0.161117] CPU1 attaching sched-domain:
[    0.161118]  domain 0: span 0-1 level MC
[    0.161120]   groups: group c3203778 cpus 1 group c3003778 cpus 0
[    0.161167] devtmpfs: initialized
[    0.161167] regulator: core version 0.5
[    0.161167] NET: Registered protocol family 16
[    0.161167] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.161167] ACPI: bus type pci registered
[    0.161167] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.161167] PCI: Not using MMCONFIG.
[    0.161167] PCI: PCI BIOS revision 3.00 entry at 0xfdca1, last bus=10
[    0.161167] PCI: Using configuration type 1 for base access
[    0.161167] bio: create slab <bio-0> at 0
[    0.161167] ACPI: EC: Look up EC in DSDT
[    0.167199] ACPI: BIOS _OSI(Linux) query ignored
[    0.188068] ACPI: Interpreter enabled
[    0.188071] ACPI: (supports S0 S3 S4 S5)
[    0.188090] ACPI: Using IOAPIC for interrupt routing
[    0.188132] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.189433] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.189435] PCI: Using MMCONFIG for extended config space
[    0.193486] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.193850] ACPI: No dock devices found.
[    0.194238] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.194282] DMAR: Forcing write-buffer flush capability
[    0.194283] DMAR: Disabling IOMMU for graphics on this chipset
[    0.194343] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.194346] pci 0000:00:01.0: PME# disabled
[    0.194412] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
[    0.194495] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
[    0.194577] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f]
[    0.194654] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0404800-0xf0404bff]
[    0.194723] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.194727] pci 0000:00:1a.7: PME# disabled
[    0.194765] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
[    0.194818] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.194821] pci 0000:00:1b.0: PME# disabled
[    0.194894] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.194897] pci 0000:00:1c.0: PME# disabled
[    0.194973] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.194977] pci 0000:00:1c.3: PME# disabled
[    0.195050] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.195054] pci 0000:00:1c.5: PME# disabled
[    0.195105] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[    0.195179] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[    0.195252] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[    0.195331] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0404c00-0xf0404fff]
[    0.195401] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.195405] pci 0000:00:1d.7: PME# disabled
[    0.195591] pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7]
[    0.195596] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7]
[    0.195602] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef]
[    0.195608] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3]
[    0.195613] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df]
[    0.195619] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0404000-0xf04047ff]
[    0.195661] pci 0000:00:1f.2: PME# supported from D3hot
[    0.195664] pci 0000:00:1f.2: PME# disabled
[    0.195691] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
[    0.195704] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[    0.195778] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
[    0.195795] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.195813] pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
[    0.195826] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[    0.195839] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[    0.195955] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[    0.195958] pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
[    0.195962] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.196009] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[    0.196013] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[    0.196018] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[    0.196089] pci 0000:07:00.0: reg 10 64bit mmio: [0x000000-0x001fff]
[    0.196214] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.196220] pci 0000:07:00.0: PME# disabled
[    0.196294] pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
[    0.196297] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
[    0.196303] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
[    0.196354] pci 0000:09:00.0: reg 10 64bit mmio: [0x000000-0x03ffff]
[    0.196362] pci 0000:09:00.0: reg 18 io port: [0x00-0x7f]
[    0.196447] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.196451] pci 0000:09:00.0: PME# disabled
[    0.196483] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.196514] pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
[    0.196518] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
[    0.196523] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
[    0.196569] pci 0000:00:1e.0: transparent bridge
[    0.196595] pci_bus 0000:00: on NUMA node 0
[    0.196599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.196736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.196797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.196875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.196939] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.207416] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.207507] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.207596] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[    0.207685] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.207774] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.207863] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.207952] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.208052] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.208143] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.208146] vgaarb: loaded
[    0.208158] PCI: Using ACPI for IRQ routing
[    0.208158] pci 0000:00:1c.0: BAR 13: can't allocate resource
[    0.208159] pci 0000:00:1c.0: BAR 14: can't allocate resource
[    0.208161] pci 0000:00:1c.0: BAR 15: can't allocate resource
[    0.208163] pci 0000:00:1c.3: BAR 13: can't allocate resource
[    0.208165] pci 0000:00:1c.3: BAR 14: can't allocate resource
[    0.208166] pci 0000:00:1c.3: BAR 15: can't allocate resource
[    0.208168] pci 0000:00:1c.5: BAR 13: can't allocate resource
[    0.208170] pci 0000:00:1c.5: BAR 14: can't allocate resource
[    0.208172] pci 0000:00:1c.5: BAR 15: can't allocate resource
[    0.208326] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.208331] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.208336] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.212013] Switching to clocksource tsc
[    0.213114] pnp: PnP ACPI init
[    0.213120] ACPI: bus type pnp registered
[    0.213890] pnp 00:04: io resource (0x2e-0x2f) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    0.213894] pnp 00:04: io resource (0x61-0x61) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    0.213897] pnp 00:04: io resource (0x63-0x63) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    0.213900] pnp 00:04: io resource (0x65-0x65) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    0.213903] pnp 00:04: io resource (0x67-0x67) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    0.213905] pnp 00:04: io resource (0x68-0x6f) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    0.213908] pnp 00:04: io resource (0x70-0x70) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    0.214754] pnp: PnP ACPI: found 10 devices
[    0.214755] ACPI: ACPI bus type pnp unregistered
[    0.214758] PnPBIOS: Disabled by ACPI PNP
[    0.214766] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.214772] system 00:04: ioport range 0x680-0x69f has been reserved
[    0.214774] system 00:04: ioport range 0x480-0x48f has been reserved
[    0.214777] system 00:04: ioport range 0xffff-0xffff has been reserved
[    0.214779] system 00:04: ioport range 0xffff-0xffff has been reserved
[    0.214782] system 00:04: ioport range 0x1000-0x107f has been reserved
[    0.214784] system 00:04: ioport range 0x1180-0x11ff has been reserved
[    0.214787] system 00:04: ioport range 0x164e-0x164f has been reserved
[    0.214789] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[    0.214792] system 00:04: ioport range 0x400-0x47f has been reserved
[    0.214798] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.214800] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
[    0.214803] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.214806] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.214808] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[    0.214811] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.214813] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.214818] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.249521] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[    0.249524] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.249527] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
[    0.249530] pci 0000:00:01.0:   MEM window: 0xcc000000-0xceffffff
[    0.249534] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.249538] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.249541] pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
[    0.249546] pci 0000:00:1c.0:   MEM window: 0xc0000000-0xc01fffff
[    0.249550] pci 0000:00:1c.0:   PREFETCH window: 0x000000c0200000-0x000000c03fffff
[    0.249565] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07
[    0.249568] pci 0000:00:1c.3:   IO window: 0x4000-0x4fff
[    0.249572] pci 0000:00:1c.3:   MEM window: 0xc0400000-0xc05fffff
[    0.249576] pci 0000:00:1c.3:   PREFETCH window: 0x000000c0600000-0x000000c07fffff
[    0.249592] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
[    0.249595] pci 0000:00:1c.5:   IO window: 0x5000-0x5fff
[    0.249599] pci 0000:00:1c.5:   MEM window: 0xc0800000-0xc09fffff
[    0.249603] pci 0000:00:1c.5:   PREFETCH window: 0x000000c0a00000-0x000000c0bfffff
[    0.249609] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[    0.249611] pci 0000:00:1e.0:   IO window: disabled
[    0.249615] pci 0000:00:1e.0:   MEM window: disabled
[    0.249618] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.249630] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.249634] pci 0000:00:01.0: setting latency timer to 64
[    0.249640] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.249644] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.249649] pci 0000:00:1c.0: setting latency timer to 64
[    0.249655] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[    0.249660] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.249664] pci 0000:00:1c.3: setting latency timer to 64
[    0.249671] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[    0.249674] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.249679] pci 0000:00:1c.5: setting latency timer to 64
[    0.249684] pci 0000:00:1e.0: setting latency timer to 64
[    0.249688] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.249690] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.249692] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
[    0.249694] pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
[    0.249697] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.249699] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.249702] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff]
[    0.249704] pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff]
[    0.249706] pci_bus 0000:07: resource 0 io:  [0x4000-0x4fff]
[    0.249709] pci_bus 0000:07: resource 1 mem: [0xc0400000-0xc05fffff]
[    0.249711] pci_bus 0000:07: resource 2 pref mem [0xc0600000-0xc07fffff]
[    0.249713] pci_bus 0000:09: resource 0 io:  [0x5000-0x5fff]
[    0.249716] pci_bus 0000:09: resource 1 mem: [0xc0800000-0xc09fffff]
[    0.249718] pci_bus 0000:09: resource 2 pref mem [0xc0a00000-0xc0bfffff]
[    0.249720] pci_bus 0000:0a: resource 3 io:  [0x00-0xffff]
[    0.249723] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff]
[    0.249744] NET: Registered protocol family 2
[    0.249804] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.250019] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.250316] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.250473] TCP: Hash tables configured (established 131072 bind 65536)
[    0.250475] TCP reno registered
[    0.250527] NET: Registered protocol family 1
[    0.250545] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.250561] pci 0000:00:1a.0: PCI INT A disabled
[    0.250568] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.250584] pci 0000:00:1a.1: PCI INT B disabled
[    0.250589] pci 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.250604] pci 0000:00:1a.2: PCI INT C disabled
[    0.250613] pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.250630] pci 0000:00:1a.7: PCI INT C disabled
[    0.250640] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.250655] pci 0000:00:1d.0: PCI INT A disabled
[    0.250660] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.250675] pci 0000:00:1d.1: PCI INT B disabled
[    0.250681] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.250696] pci 0000:00:1d.2: PCI INT C disabled
[    0.250704] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.250717] pci 0000:00:1d.7: PCI INT A disabled
[    0.250749] pci 0000:01:00.0: Boot video device
[    0.250785] Unpacking initramfs...
[    0.504443] Freeing initrd memory: 10216k freed
[    0.508422] Simple Boot Flag at 0x36 set to 0x1
[    0.508685] audit: initializing netlink socket (disabled)
[    0.508697] type=2000 audit(1345591371.507:1): initialized
[    0.511760] highmem bounce pool size: 64 pages
[    0.511764] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.512977] VFS: Disk quotas dquot_6.5.2
[    0.513022] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.513087] msgmni has been set to 1707
[    0.513242] alg: No test for stdrng (krng)
[    0.513284] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.513286] io scheduler noop registered
[    0.513288] io scheduler anticipatory registered
[    0.513289] io scheduler deadline registered
[    0.513321] io scheduler cfq registered (default)
[    0.513424] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.513430] pcieport 0000:00:01.0: setting latency timer to 64
[    0.513524] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.513532] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.513632] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[    0.513639] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.513745] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[    0.513752] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.513884] isapnp: Scanning for PnP cards...
[    0.868711] isapnp: No Plug & Play device found
[    0.869887] Linux agpgart interface v0.103
[    0.870000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.870319] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.873301] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.875252] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.875257] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.875259] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.875262] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.875264] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.875321] mice: PS/2 mouse device common for all mice
[    0.875359] rtc_cmos 00:05: RTC can wake from S4
[    0.875389] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.875414] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.875424] cpuidle: using governor ladder
[    0.875425] cpuidle: using governor menu
[    0.875429] No iBFT detected.
[    0.875692] TCP cubic registered
[    0.875810] NET: Registered protocol family 10
[    0.876406] Mobile IPv6
[    0.876409] NET: Registered protocol family 17
[    0.876419] Using IPI No-Shortcut mode
[    0.876471] PM: Resume from disk failed.


Сообщение объединено: 21 Август 2012, 23:37:53
# dmesg
(продолжение)
[spoiler]
[    0.876479] registered taskstats version 1
[    0.876836] rtc_cmos 00:05: setting system clock to 2012-08-21 23:22:52 UTC (1345591372)
[    0.876895] Initalizing network drop monitor service
[    0.876915] Freeing unused kernel memory: 380k freed
[    0.877069] Write protecting the kernel text: 2508k
[    0.877087] Write protecting the kernel read-only data: 920k
[    0.890315] udev[56]: starting version 164
[    0.907527] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.972996] usbcore: registered new interface driver usbfs
[    0.973121] usbcore: registered new interface driver hub
[    0.973248] usbcore: registered new device driver usb
[    0.987149] SCSI subsystem initialized
[    0.988543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.988567] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.988582] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.988585] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.988600] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.988632] ehci_hcd 0000:00:1a.7: debug port 1
[    0.990559] ATL1E 0000:09:00.0: enabling device (0000 -> 0003)
[    0.990566] ATL1E 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.990576] ATL1E 0000:09:00.0: setting latency timer to 64
[    0.992136] uhci_hcd: USB Universal Host Controller Interface driver
[    0.992516] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.992614] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0404800
[    1.007920] libata version 3.00 loaded.
[    1.007991] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.008013] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.008015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.008018] usb usb1: Product: EHCI Host Controller
[    1.008020] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.008021] usb usb1: SerialNumber: 0000:00:1a.7
[    1.008085] usb usb1: configuration #1 chosen from 1 choice
[    1.008111] hub 1-0:1.0: USB hub found
[    1.008117] hub 1-0:1.0: 6 ports detected
[    1.008172] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.008178] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.008181] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.008188] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    1.008215] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    1.008241] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.008243] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.008245] usb usb2: Product: UHCI Host Controller
[    1.008247] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.008249] usb usb2: SerialNumber: 0000:00:1a.0
[    1.008298] usb usb2: configuration #1 chosen from 1 choice
[    1.008321] hub 2-0:1.0: USB hub found
[    1.008326] hub 2-0:1.0: 2 ports detected
[    1.008421] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.008434] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.008437] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.008443] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    1.008470] ehci_hcd 0000:00:1d.7: debug port 1
[    1.012355] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.012365] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0404c00
[    1.028006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.028019] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.028021] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.028023] usb usb3: Product: EHCI Host Controller
[    1.028025] usb usb3: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.028027] usb usb3: SerialNumber: 0000:00:1d.7
[    1.028079] usb usb3: configuration #1 chosen from 1 choice
[    1.028102] hub 3-0:1.0: USB hub found
[    1.028108] hub 3-0:1.0: 6 ports detected
[    1.028156] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.028163] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.028166] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.028173] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.028200] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    1.028226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.028228] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.028230] usb usb4: Product: UHCI Host Controller
[    1.028232] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.028234] usb usb4: SerialNumber: 0000:00:1a.1
[    1.028285] usb usb4: configuration #1 chosen from 1 choice
[    1.028311] hub 4-0:1.0: USB hub found
[    1.028316] hub 4-0:1.0: 2 ports detected
[    1.028358] ahci 0000:00:1f.2: version 3.0
[    1.028367] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.028396] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    1.028459] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.028462] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
[    1.028466] ahci 0000:00:1f.2: setting latency timer to 64
[    1.028670] scsi0 : ahci
[    1.028747] scsi1 : ahci
[    1.028793] scsi2 : ahci
[    1.028838] scsi3 : ahci
[    1.028885] scsi4 : ahci
[    1.028931] scsi5 : ahci
[    1.029075] ata1: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404100 irq 28
[    1.029078] ata2: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404180 irq 28
[    1.029080] ata3: DUMMY
[    1.029081] ata4: DUMMY
[    1.029084] ata5: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404300 irq 28
[    1.029086] ata6: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404380 irq 28
[    1.029120] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    1.029127] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.029129] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.029137] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.029158] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[    1.029187] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.029190] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.029192] usb usb5: Product: UHCI Host Controller
[    1.029194] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.029195] usb usb5: SerialNumber: 0000:00:1a.2
[    1.029250] usb usb5: configuration #1 chosen from 1 choice
[    1.029276] hub 5-0:1.0: USB hub found
[    1.029282] hub 5-0:1.0: 2 ports detected
[    1.029323] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.029329] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.029332] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.029338] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.029362] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    1.029390] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.029392] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.029394] usb usb6: Product: UHCI Host Controller
[    1.029396] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.029398] usb usb6: SerialNumber: 0000:00:1d.0
[    1.029446] usb usb6: configuration #1 chosen from 1 choice
[    1.029468] hub 6-0:1.0: USB hub found
[    1.029473] hub 6-0:1.0: 2 ports detected
[    1.029513] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.029519] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.029522] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.029527] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.029548] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    1.029572] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.029575] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.029577] usb usb7: Product: UHCI Host Controller
[    1.029578] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.029580] usb usb7: SerialNumber: 0000:00:1d.1
[    1.029628] usb usb7: configuration #1 chosen from 1 choice
[    1.029650] hub 7-0:1.0: USB hub found
[    1.029655] hub 7-0:1.0: 2 ports detected
[    1.029693] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.029701] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.029703] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.029709] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.029735] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    1.029760] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.029762] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.029764] usb usb8: Product: UHCI Host Controller
[    1.029766] usb usb8: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.029768] usb usb8: SerialNumber: 0000:00:1d.2
[    1.029816] usb usb8: configuration #1 chosen from 1 choice
[    1.029838] hub 8-0:1.0: USB hub found
[    1.029843] hub 8-0:1.0: 2 ports detected
[    1.038355] thermal LNXTHERM:01: registered as thermal_zone0
[    1.038362] ACPI: Thermal Zone [THRM] (53 C)
[    1.321008] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.348015] ata6: SATA link down (SStatus 0 SControl 300)
[    1.512015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.512018] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.512031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.513704] ata2.00: ATAPI: PIONEER DVD-RW DVRTD08RS, 1.05, max UDMA/33
[    1.515723] ata2.00: configured for UDMA/33
[    1.703091] usb 1-2: New USB device found, idVendor=0bda, idProduct=0158
[    1.703093] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.703096] usb 1-2: Product: USB2.0-CRW
[    1.703097] usb 1-2: Manufacturer: Generic
[    1.703099] usb 1-2: SerialNumber: 20071114173400000
[    1.703163] usb 1-2: configuration #1 chosen from 1 choice
[    1.713093] Initializing USB Mass Storage driver...
[    1.713171] scsi6 : SCSI emulation for USB Mass Storage devices
[    1.713233] usbcore: registered new interface driver usb-storage
[    1.713236] USB Mass Storage support registered.
[    1.713239] usb-storage: device found at 2
[    1.713241] usb-storage: waiting for device to settle before scanning
[    1.912039] ACPI Warning for \_SB_.PCI0.SAT0.PRT4._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[    1.912069] ata5.00: _GTF unexpected object type 0x1
[    1.912071] ACPI Warning for \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[    1.912077] ata1.00: _GTF unexpected object type 0x1
[    1.912419] ata5.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
[    1.912422] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.912447] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
[    1.912450] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.040008] usb 1-6: new high speed USB device using ehci_hcd and address 5
[    2.213370] usb 1-6: New USB device found, idVendor=064e, idProduct=a103
[    2.213373] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.213375] usb 1-6: Product: Acer Crystal Eye webcam
[    2.213377] usb 1-6: Manufacturer: SuYin
[    2.213378] usb 1-6: SerialNumber: CN0314-SN30-OV03-VA-R02.03.02
[    2.213432] usb 1-6: configuration #1 chosen from 1 choice
[    2.312077] ata5.00: _GTF unexpected object type 0x1
[    2.312080] ata1.00: _GTF unexpected object type 0x1
[    2.312442] ata1.00: configured for UDMA/133
[    2.312529] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
[    2.312817] ata5.00: configured for UDMA/133
[    2.344593] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW DVRTD08RS 1.05 PQ: 0 ANSI: 5
[    2.344728] scsi 4:0:0:0: Direct-Access     ATA      Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
[    2.353272] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.353318] sd 0:0:0:0: [sda] Write Protect is off
[    2.353321] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.353330] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.353343] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.353373] sd 4:0:0:0: [sdb] Write Protect is off
[    2.353376] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.353395] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.353475]  sda:
[    2.353529]  sdb: sdb3
[    2.377244] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.378374]  sda1 sda2 < sda5 sda6 sda7 >
[    2.418155] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.457009] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    2.467644] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.467646] Uniform CD-ROM driver Revision: 3.20
[    2.467717] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.471301] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.471616] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.471640] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.626323] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2101
[    2.626326] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.626329] usb 4-1: Product: Acer Module
[    2.626330] usb 4-1: Manufacturer: Broadcom Corp
[    2.626399] usb 4-1: configuration #1 chosen from 1 choice
[    2.869013] usb 4-2: new full speed USB device using uhci_hcd and address 3
[    3.043346] usb 4-2: New USB device found, idVendor=147e, idProduct=1000
[    3.043349] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.043351] usb 4-2: Product: Fingerprint Sensor   
[    3.043353] usb 4-2: Manufacturer: TouchStrip       
[    3.043421] usb 4-2: configuration #1 chosen from 1 choice
[    3.691704] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    5.272310] udev[396]: starting version 164
[    5.523246] ACPI: AC Adapter [ACAD] (on-line)
[    5.539428] ACPI: Battery Slot [BAT1] (battery present)
[    5.610081] ACPI: SSDT bfd1ac20 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    5.610506] ACPI: SSDT bfd18620 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    5.612359] Monitor-Mwait will be used to enter C-1 state
[    5.612377] Monitor-Mwait will be used to enter C-2 state
[    5.612394] Monitor-Mwait will be used to enter C-3 state
[    5.612398] Marking TSC unstable due to TSC halts in idle
[    5.612583] processor LNXCPU:00: registered as cooling_device0
[    5.612941] Switching to clocksource hpet
[    5.613257] ACPI: SSDT bfd19ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20061109)
[    5.613570] ACPI: SSDT bfd19f20 0008D (v01  PmRef    ApCst 00003000 INTL 20061109)
[    5.614451] processor LNXCPU:01: registered as cooling_device1
[    5.617456] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    5.617522] ACPI: Lid Switch [LID]
[    5.617563] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    5.617567] ACPI: Power Button [PWRB]
[    5.617607] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    5.617611] ACPI: Sleep Button [SLPB]
[    5.617661] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.617663] ACPI: Power Button [PWRF]
[    5.701770] ACPI: WMI: Mapper loaded
[    6.182177] acpi device:01: registered as cooling_device2
[    6.182718] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[    6.182725] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.287298] Bluetooth: Core ver 2.15
[    6.287480] NET: Registered protocol family 31
[    6.287482] Bluetooth: HCI device and connection manager initialized
[    6.287484] Bluetooth: HCI socket layer initialized
[    6.329620] cfg80211: Using static regulatory domain info
[    6.329624] cfg80211: Regulatory domain: US
[    6.329625]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    6.329627]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    6.329630]    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.329632]    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.329634]    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.329637]    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.329639]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    6.329884] cfg80211: Calling CRDA for country: US
[    6.403135] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    6.525748] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    6.525753] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
[    6.525947] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.531450] acer-wmi: Acer Laptop ACPI-WMI Extras
[    6.531884] acer-wmi: Brightness must be controlled by generic video driver
[    6.592037] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    6.592127] usbcore: registered new interface driver btusb
[    6.712379] usb-storage: device scan complete
[    6.714236] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    6.714653] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    6.718709] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    7.035864] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04000/0x0
[    7.069315] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[    7.112774] cfg80211: Regulatory domain changed to country: US
[    7.112777]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.112780]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.112782]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.112784]    (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.112787]    (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.112789]    (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.112791]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.354764] nvidia: module license 'NVIDIA' taints kernel.
[    7.354768] Disabling lock debugging due to kernel taint
[    8.284673] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.284687] nvidia 0000:01:00.0: setting latency timer to 64
[    8.284698] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    8.284830] NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.31  Tue Jun  1 22:08:27 PDT 2010
[    8.312062] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[    8.312064] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[    8.312103] iwlagn 0000:07:00.0: enabling device (0000 -> 0002)
[    8.312109] iwlagn 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    8.312119] iwlagn 0000:07:00.0: setting latency timer to 64
[    8.312141] iwlagn 0000:07:00.0: Detected Intel Wireless WiFi Link 5100ABG REV=0x54
[    8.326735] Linux video capture interface: v2.00
[    8.340479] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
[    8.348328] iwlagn 0000:07:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[    8.348389] iwlagn 0000:07:00.0: irq 29 for MSI/MSI-X
[    8.356821] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input8
[    8.356868] usbcore: registered new interface driver uvcvideo
[    8.356870] USB Video Class driver (v0.1.0)
[    8.475836] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    8.475867] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.486539] phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.654139] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    9.602555] Adding 6075384k swap on /dev/sda6.  Priority:-1 extents:1 across:6075384k
[   10.026256] loop: module loaded
[   10.544485] EXT4-fs (sda7): mounted filesystem with ordered data mode
[   11.408028] fuse init (API version 7.13)
[   11.880812] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[   12.156957] apm: BIOS not found.
[   14.181921] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   14.451767] iwlagn 0000:07:00.0: loaded firmware version 8.24.2.12
[   14.588120] Registered led device: iwl-phy0::radio
[   14.588146] Registered led device: iwl-phy0::assoc
[   14.588166] Registered led device: iwl-phy0::RX
[   14.588189] Registered led device: iwl-phy0::TX
[   14.600545] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.613703] ATL1E 0000:09:00.0: irq 30 for MSI/MSI-X
[   14.613960] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.129506] Bluetooth: L2CAP ver 2.14
[   16.129508] Bluetooth: L2CAP socket layer initialized
[   16.174149] Bluetooth: RFCOMM TTY layer initialized
[   16.174153] Bluetooth: RFCOMM socket layer initialized
[   16.174155] Bluetooth: RFCOMM ver 1.11
[   16.329480] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.329482] Bluetooth: BNEP filters: protocol multicas
« Последнее редактирование: 22 Август 2012, 00:37:53 от koljan8115 »
 

Оффлайн kobzar

достаточно вывод lspci
но еще проще посмотреть характеристику вашего букав нете что бы определиться какой у вас чипсет !
Ты дорого мой друг, заплатишь за ошибку,..
Когда оскал мой милый, ты приймешь за улыбку.
 

Оффлайн koljan8115

# lspci
Spoiler: ShowHide

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GS] (rev a1)
07:00.0 Network controller: Intel Corporation WiFi Link 5100
09:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)


Сообщение объединено: 22 Август 2012, 15:42:58
# lspci -vnn
Spoiler: ShowHide

00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, fast devsel, latency 0
   Capabilities: [e0] Vendor Specific Information: Len=0a <?>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   I/O behind bridge: 00002000-00002fff
   Memory behind bridge: cc000000-ceffffff
   Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
   Capabilities: [88] Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Capabilities: [80] Power Management version 3
   Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
   Capabilities: [a0] Express Root Port (Slot+), MSI 00
   Capabilities: [100] Virtual Channel
   Capabilities: [140] Root Complex Link
   Kernel driver in use: pcieport

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, medium devsel, latency 0, IRQ 16
   I/O ports at 1800 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, medium devsel, latency 0, IRQ 21
   I/O ports at 1820 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, medium devsel, latency 0, IRQ 19
   I/O ports at 1840 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, medium devsel, latency 0, IRQ 19
   Memory at f0404800 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [50] Power Management version 2
   Capabilities: [58] Debug port: BAR=1 offset=00a0
   Capabilities: [98] PCI Advanced Features
   Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, fast devsel, latency 0, IRQ 22
   Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 2
   Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
   Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
   Capabilities: [100] Virtual Channel
   Capabilities: [130] Root Complex Link
   Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: c0000000-c01fffff
   Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
   Capabilities: [40] Express Root Port (Slot+), MSI 00
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
   Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Capabilities: [a0] Power Management version 2
   Capabilities: [100] Virtual Channel
   Capabilities: [180] Root Complex Link
   Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
   I/O behind bridge: 00004000-00004fff
   Memory behind bridge: c0400000-c05fffff
   Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
   Capabilities: [40] Express Root Port (Slot+), MSI 00
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
   Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Capabilities: [a0] Power Management version 2
   Capabilities: [100] Virtual Channel
   Capabilities: [180] Root Complex Link
   Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
   I/O behind bridge: 00005000-00005fff
   Memory behind bridge: c0800000-c09fffff
   Prefetchable memory behind bridge: 00000000c0a00000-00000000c0bfffff
   Capabilities: [40] Express Root Port (Slot+), MSI 00
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
   Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Capabilities: [a0] Power Management version 2
   Capabilities: [100] Virtual Channel
   Capabilities: [180] Root Complex Link
   Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, medium devsel, latency 0, IRQ 23
   I/O ports at 1860 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, medium devsel, latency 0, IRQ 19
   I/O ports at 1880 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, medium devsel, latency 0, IRQ 18
   I/O ports at 18a0 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, medium devsel, latency 0, IRQ 23
   Memory at f0404c00 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [50] Power Management version 2
   Capabilities: [58] Debug port: BAR=1 offset=00a0
   Capabilities: [98] PCI Advanced Features
   Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
   Capabilities: [50] Subsystem: Acer Incorporated [ALI] Device [1025:015e]

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, medium devsel, latency 0
   Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 28
   I/O ports at 18f0 [size=8]
   I/O ports at 18e4
   I/O ports at 18e8 [size=8]
   I/O ports at 18e0
   I/O ports at 18c0 [size=32]
   Memory at f0404000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
   Capabilities: [70] Power Management version 3
   Capabilities: [a8] SATA HBA v1.0
   Capabilities: [b0] PCI Advanced Features
   Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: medium devsel, IRQ 19
   Memory at c0c00000 (64-bit, non-prefetchable) [size=256]
   I/O ports at 1c00 [size=32]

01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9600M GS] [10de:0648] (rev a1) (prog-if 00 [VGA controller])
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, fast devsel, latency 0, IRQ 16
   Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
   Memory at d0000000 (64-bit, prefetchable) [size=256M]
   Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
   I/O ports at 2000 [size=128]
   Expansion ROM at <unassigned> [disabled]
   Capabilities: [60] Power Management version 3
   Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
   Capabilities: [78] Express Endpoint, MSI 00
   Capabilities: [b4] Vendor Specific Information: Len=14 <?>
   Capabilities: [100] Virtual Channel
   Capabilities: [128] Power Budgeting <?>
   Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
   Kernel driver in use: nvidia

07:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
   Subsystem: Intel Corporation WiFi Link 5100 ABG [8086:1206]
   Flags: bus master, fast devsel, latency 0, IRQ 29
   Memory at c0400000 (64-bit, non-prefetchable) [size=8K]
   Capabilities: [c8] Power Management version 3
   Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [e0] Express Endpoint, MSI 00
   Capabilities: [100] Advanced Error Reporting
   Capabilities: [140] Device Serial Number 00-21-5d-ff-ff-92-0a-e4
   Kernel driver in use: iwlagn

09:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
   Subsystem: Acer Incorporated [ALI] Device [1025:015e]
   Flags: bus master, fast devsel, latency 0, IRQ 30
   Memory at c0800000 (64-bit, non-prefetchable) [size=256K]
   I/O ports at 5000 [size=128]
   Capabilities: [40] Power Management version 2
   Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [58] Express Endpoint, MSI 00
   Capabilities: [6c] Vital Product Data
   Capabilities: [100] Advanced Error Reporting
   Capabilities: [180] Device Serial Number ff-f4-6d-01-00-1e-68-ff
   Kernel driver in use: ATL1E
« Последнее редактирование: 22 Август 2012, 15:42:58 от koljan8115 »
 

Оффлайн kobzar

Отлично!
Я посмотрел!
Что дальше ?
Вы проверили поддерживает ли ваш чипсе режим "мастер" ?
Ты дорого мой друг, заплатишь за ошибку,..
Когда оскал мой милый, ты приймешь за улыбку.
 

Оффлайн koljan8115

Я хотел и раньше отослать выводы команд lspci и lspci -vnn, ноне смотря на то что они вместе занимают 12319 символов с пробелами, проверил с помощью статистики gedit, все- равно писало что якобы я отправляю больше 60000 символов, а при следуюющих попытках отправить выводилось сообщение "Ошибка базы данных".
 

Оффлайн kobzar

Наверное у вас как то плохо монитор передает картинку.
Попробуем еще раз

Отлично!
Я посмотрел!
Что дальше ?
Вы проверили поддерживает ли ваш чипсе режим "мастер" ?
Ты дорого мой друг, заплатишь за ошибку,..
Когда оскал мой милый, ты приймешь за улыбку.
 

Оффлайн koljan8115

# iwconfig eth0 mode Managed
Spoiler: ShowHide

Error for wireless request "Set Mode" (8B06) :
    SET failed on device eth0 ; Operation not supported.

# iwconfig eth0 mode Ad-Hoc
Spoiler: ShowHide

Error for wireless request "Set Mode" (8B06) :
    SET failed on device eth0 ; Operation not supported.
 

Оффлайн kobzar

вывод ifconfig -a
Ты дорого мой друг, заплатишь за ошибку,..
Когда оскал мой милый, ты приймешь за улыбку.
 

Теги:
 

поднятие туннеля PPTP через NAT на Debian

Автор Izolda

Ответов: 0
Просмотров: 885
Последний ответ 07 Сентябрь 2017, 16:26:13
от Izolda
Раздача интернета через маршрутизатор

Автор Лесьяр

Ответов: 20
Просмотров: 4946
Последний ответ 31 Август 2014, 12:42:33
от sandaksatru
Настройка samba и доступа к Windows-сетям.

Автор Извращенец

Ответов: 5
Просмотров: 2532
Последний ответ 04 Май 2011, 11:55:58
от Ghostdmn
Балансировка трафика через двух провайдеров

Автор swank

Ответов: 3
Просмотров: 1230
Последний ответ 17 Май 2018, 04:24:37
от 315th
Некоректно работает интернет через WiFi c ADSL роутера

Автор bogd_b

Ответов: 20
Просмотров: 5944
Последний ответ 03 Ноябрь 2014, 07:58:24
от Malaheenee