Debian 6.0.5 ошибка NOT RESPONDING

andresyto · 29 августа 2012, 06:34:34

Айлаха всем! подскажите что может быть где косяк
суть проблемы следующая при перезагрузки ПК на Экране выводится сообщение NOT RESPONDING и Пк снова уходит в перезагрузку и так в течении 15 - 20 минут
выбираю загрузку save mode тоже самое уходит перезагрузку.
вот http://rusfolder.com/32355181 видео снятое на телефон подскажите какой лог копать чтобы понять в чем дело.

kobzar · 29 августа 2012, 09:44:18

если свежеустановленная система - переустановите.
Если рабочая - рассказывайте после чего сие чудо появилось!

andresyto · 29 августа 2012, 09:54:02

в том то и дело на нем крутится корпоративная почта, раздача инета, и VPN канал с цехом
мое предположения после мудрения с правилами

начальными настройки все нормально тачка бес проблем все загружалась
установил почтовый пакет iredmail v8 тоже все нормально установилось без ошибок и тачка тоже нормально перегружалась
начал настраивать раздачи DHCP и инета с него для локальных пользователей и доступа к почте, также поставил squid и squidGuard, вот тут у меня затор :-(
Инет идет, но не через прокси пока не понимаю как завернуть запросы на прокси сервер. Видать что то намудрил с правилами.
информация о :
uname -a
Linux server.XXX-XXX.ru 2.6.32-5-amd64 #1 SMP Sun May 6 05:12:07 UTC 2012 x86_64 GNU/Linux

Открыть содержимое (спойлер)

id: server.xxx-xxx.ru
description: Desktop Computer
product: X38-DQ6
vendor: Gigabyte Technology Co., Ltd.
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp vsyscall64 vsyscall32
configuration: boot = normal
chassis = desktop
cpus = 4
uuid = 00000000-0000-0000-0000-001A4D570F24
id: core
description: Motherboard
product: X38-DQ6
vendor: Gigabyte Technology Co., Ltd.
physical id: 0
version: x.x
id: firmware
description: BIOS
vendor: Award Software International, Inc.
physical id: 0
version: F4 (09/19/2007)
size: 128KiB
capacity: 960KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
id: cpu:0
description: CPU
product: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.15.11
serial: 0000-06FB-0000-0000-0000-0000
slot: Socket 775
size: 2400MHz
capacity: 4GHz
width: 64 bits
clock: 266MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow vnmi flexpriority
configuration: id = 1
id: cache:0
description: L1 cache
physical id: a
slot: Internal Cache
size: 64KiB
capacity: 64KiB
capabilities: synchronous internal write-back
id: cache:1
description: L2 cache
physical id: b
slot: External Cache
size: 4MiB
capabilities: synchronous internal write-back
id: logicalcpu:0
description: Logical CPU
physical id: 1.1
width: 64 bits
capabilities: logical
id: logicalcpu:1
description: Logical CPU
physical id: 1.2
width: 64 bits
capabilities: logical
id: logicalcpu:2
description: Logical CPU
physical id: 1.3
width: 64 bits
capabilities: logical
id: logicalcpu:3
description: Logical CPU
physical id: 1.4
width: 64 bits
capabilities: logical
id: memory
description: System Memory
physical id: 19
slot: System board or motherboard
size: 4GiB
id: bank:0
description: DIMM 800 MHz (1.2 ns)
physical id: 0
slot: A0
size: 2GiB
width: 64 bits
clock: 800MHz (1.2ns)
id: bank:1
description: DIMM [empty]
physical id: 1
slot: A1
id: bank:2
description: DIMM 800 MHz (1.2 ns)
physical id: 2
slot: A2
size: 2GiB
width: 64 bits
clock: 800MHz (1.2ns)
id: bank:3
description: DIMM [empty]
physical id: 3
slot: A3
id: cpu:1
physical id: 1
bus info: cpu@1
version: 6.15.11
serial: 0000-06FB-0000-0000-0000-0000
size: 2400MHz
capabilities: vmx ht
configuration: id = 1
id: logicalcpu:0
description: Logical CPU
physical id: 1.1
capabilities: logical
id: logicalcpu:1
description: Logical CPU
physical id: 1.2
capabilities: logical
id: logicalcpu:2
description: Logical CPU
physical id: 1.3
capabilities: logical
id: logicalcpu:3
description: Logical CPU
physical id: 1.4
capabilities: logical
id: cpu:2
physical id: 2
bus info: cpu@2
version: 6.15.11
serial: 0000-06FB-0000-0000-0000-0000
size: 2400MHz
capabilities: vmx ht
configuration: id = 1
id: logicalcpu:0
description: Logical CPU
physical id: 1.1
capabilities: logical
id: logicalcpu:1
description: Logical CPU
physical id: 1.2
capabilities: logical
id: logicalcpu:2
description: Logical CPU
physical id: 1.3
capabilities: logical
id: logicalcpu:3
description: Logical CPU
physical id: 1.4
capabilities: logical
id: cpu:3
physical id: 3
bus info: cpu@3
version: 6.15.11
serial: 0000-06FB-0000-0000-0000-0000
size: 2400MHz
capabilities: vmx ht
configuration: id = 1
id: logicalcpu:0
description: Logical CPU
physical id: 1.1
capabilities: logical
id: logicalcpu:1
description: Logical CPU
physical id: 1.2
capabilities: logical
id: logicalcpu:2
description: Logical CPU
physical id: 1.3
capabilities: logical
id: logicalcpu:3
description: Logical CPU
physical id: 1.4
capabilities: logical
id: pci
description: Host bridge
product: 82X38/X48 Express DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 01
width: 32 bits
clock: 33MHz
configuration: driver = x38_edac
resources: irq : 0
id: pci:0
description: PCI bridge
product: 82X38/X48 Express Host-Primary PCI Express Bridge
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver = pcieport
resources: irq : 24
ioport : a000(size=4096)
memory : f4000000-f6ffffff
ioport : d0000000(size=536870912)
id: display
description: VGA compatible controller
product: G98 [GeForce 8400GS]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a2
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver = nouveau
latency = 0
resources: irq : 16
memory : f4000000-f4ffffff
memory : d0000000-dfffffff(prefetchable)
memory : e0000000-e1ffffff(prefetchable)
ioport : a000(size=128)
memory : e2000000-e207ffff(prefetchable)
id: multimedia
description: Audio device
product: High Definition Audio Controller
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver = HDA Intel
latency = 0
resources: irq : 16
memory : f6000000-f6003fff
id: pci:1
description: PCI bridge
product: 82X38/X48 Express Host-Secondary PCI Express Bridge
vendor: Intel Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver = pcieport
resources: irq : 25
ioport : 9000(size=4096)
id: pci:2
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver = pcieport
resources: irq : 26
ioport : 8000(size=4096)
memory : fb200000-fb3fffff
memory : fb400000-fb5fffff(prefetchable)
id: pci:3
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 4
vendor: Intel Corporation
physical id: 1c.3
bus info: pci@0000:00:1c.3
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver = pcieport
resources: irq : 27
ioport : b000(size=4096)
memory : fb000000-fb0fffff
memory : fb600000-fb7fffff(prefetchable)
id: pci:4
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 5
vendor: Intel Corporation
physical id: 1c.4
bus info: pci@0000:00:1c.4
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver = pcieport
resources: irq : 28
ioport : c000(size=4096)
memory : f7000000-f8ffffff
memory : fb800000-fb9fffff(prefetchable)
id: network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: eth0
version: 01
serial: 00:1a:4d:57:0f:24
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation = on
broadcast = yes
driver = r8169
driverversion = 2.3LK-NAPI
duplex = full
firmware = N/A
ip = 95.181.51.58
latency = 0
link = yes
multicast = yes
port = MII
speed = 100MB/s
resources: irq : 30
ioport : c000(size=256)
memory : f8000000-f8000fff
memory : fb800000-fb80ffff(prefetchable)
id: pci:5
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 6
vendor: Intel Corporation
physical id: 1c.5
bus info: pci@0000:00:1c.5
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver = pcieport
resources: irq : 29
ioport : d000(size=4096)
memory : f9000000-faffffff
memory : fba00000-fbbfffff(prefetchable)
id: network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:06:00.0
logical name: eth1
version: 01
serial: 00:1a:4d:57:0f:14
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation = on
broadcast = yes
driver = r8169
driverversion = 2.3LK-NAPI
duplex = full
firmware = N/A
ip = 192.168.0.1
latency = 0
link = yes
multicast = yes
port = MII
speed = 100MB/s
resources: irq : 31
ioport : d000(size=256)
memory : fa000000-fa000fff
memory : fba00000-fba0ffff(prefetchable)
id: pci:6
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: 92
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
resources: ioport : 7000(size=4096)
id: isa
description: ISA bridge
product: 82801IR (ICH9R) LPC Interface Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: latency = 0
id: storage
description: SATA controller
product: 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
logical name: scsi0
version: 02
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated
configuration: driver = ahci
latency = 0
resources: irq : 32
ioport : e600(size=8)
ioport : e700(size=4)
ioport : e800(size=8)
ioport : e900(size=4)
ioport : ea00(size=32)
memory : fb102000-fb1027ff
id: disk
description: ATA Disk
product: ST250DM000-1BC14
vendor: Seagate
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: JC4B
serial: Z2AJQKGN
size: 232GiB (250GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion = 5
signature = 8a723975
id: volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
logical name: /boot
version: 1.0
serial: 9bf8245a-8099-4572-82bc-8ec3a985476e
size: 476MiB
capacity: 476MiB
capabilities: primary bootable journaled extended_attributes ext3 ext2 initialized
configuration: created = 2012-08-02 20:04:47
filesystem = ext3
modified = 2012-08-29 08:26:37
mount.fstype = ext3
mount.options = rw,relatime,errors=continue,data=ordered
mounted = 2012-08-28 15:08:25
state = mounted
id: volume:1
description: Extended partition
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
size: 232GiB
capacity: 232GiB
capabilities: primary extended partitioned partitioned:extended
id: logicalvolume:0
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 7628MiB
capabilities: nofs
id: logicalvolume:1
description: Linux filesystem partition
physical id: 6
logical name: /dev/sda6
logical name: /tmp
capacity: 13GiB
configuration: mount.fstype = ext3
mount.options = rw,relatime,errors=continue,data=ordered
state = mounted
id: logicalvolume:2
description: Linux filesystem partition
physical id: 7
logical name: /dev/sda7
logical name: /
capacity: 210GiB
configuration: mount.fstype = ext3
mount.options = rw,relatime,errors=remount-ro,data=ordered
state = mounted
id: serial
description: SMBus
product: 82801I (ICH9 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 02
width: 64 bits
clock: 33MHz
configuration: driver = i801_smbus
latency = 0
resources: irq : 18
memory : fb103000-fb1030ff
ioport : 500(size=32)

[свернуть]

kobzar · 29 августа 2012, 09:59:49

попробуйте синг юзр мод и посмотрите что там у вас к чему
http://www.cyberciti.biz/faq/grub-boot-into-single-user-mode/

andresyto · 29 августа 2012, 10:00:46

скачал отсюда http://www.debian.org/CD/
вот версия диска Debian GNU/Linux 6.0.4 "Squeeze" - Official i386 DVD Binary-1 20120128-12:53
уставил стандартно установил только shh а остальное выключил
диск разметил так
sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250058268160 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8a723975
Device Boot Start End Blocks Id System
/dev/sda1 * 1 61 487424 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 61 30402 243707905 5 Extended
/dev/sda5 61 1034 7811072 82 Linux swap / Solaris
/dev/sda6 1034 2858 14647296 83 Linux
/dev/sda7 2858 30402 221247488 83 Linux

kobzar · 29 августа 2012, 10:06:44

и что ?

andresyto · 29 августа 2012, 10:10:59

сейчас Пк загружен и все эксперименты могу проводить только после 18-00 когда все разбегутся

kobzar · 29 августа 2012, 10:13:04

простите но я вас не понял.
как вы загрузились если выше пишете что у вас циклическая перезагрузка?

andresyto · 29 августа 2012, 10:14:35

"Пк снова уходит в перезагрузку и так в течении 15 - 20 минут" по истечение этого времени тачка кое как загружается

kobzar · 29 августа 2012, 10:15:23

йопт - так вы логи то почитайте ! вы ж зайти на систему можете !

andresyto · 29 августа 2012, 10:16:20

в этом файле dmesg.log

Сообщение объединено: 29 августа 2012, 10:31:28

Открыть содержимое (спойлер)

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 05:12:07 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=200d3d17-662a-4868-9aff-7f7114ae2921 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 130000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CFF00000 mask FFFF00000 write-through
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000
[ 0.000000] RAMDISK: 3777d000 - 37fef101
[ 0.000000] ACPI: RSDP 00000000000f6c90 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee3180 04B8C (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: HPET 00000000cfee7e80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7f00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfee7d80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cfee7f80 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee8530 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000d000 - 0000000000014fff]
[ 0.000000] bootmap [0000000000015000 - 000000000003afff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016d55c4] TEXT DATA BSS ==> [0001000000 - 00016d55c4]
[ 0.000000] #3 [003777d000 - 0037fef101] RAMDISK ==> [003777d000 - 0037fef101]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #5 [00016d6000 - 00016d60ee] BRK ==> [00016d6000 - 00016d60ee]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000f52b0] f52b0
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048190
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3837 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc:

0 1 2 3.
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031061
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=200d3d17-662a-4868-9aff-7f7114ae2921 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000559e000 - ffff88000959e000
[ 0.000000] software IO TLB at phys 0x559e000 - 0x959e000
[ 0.000000] Memory: 4050840k/4980736k available (3068k kernel code, 787976k absent, 141920k reserved, 2047k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2400.117 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.23 BogoMIPS (lpj=9600468)
[ 0.004022] Security Framework initialized
[ 0.004027] SELinux: Disabled at boot.
[ 0.004339] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008259] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009187] Mount-cache hash table entries: 256
[ 0.009331] Initializing cgroup subsys ns
[ 0.009335] Initializing cgroup subsys cpuacct
[ 0.009339] Initializing cgroup subsys devices
[ 0.009341] Initializing cgroup subsys freezer
[ 0.009343] Initializing cgroup subsys net_cls
[ 0.009366] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.009368] CPU: L2 cache: 4096K
[ 0.009371] CPU 0/0x0 -> Node 0
[ 0.009373] CPU: Physical Processor ID: 0
[ 0.009374] CPU: Processor Core ID: 0
[ 0.009377] mce: CPU supports 6 MCE banks
[ 0.009384] CPU0: Thermal monitoring enabled (TM2)
[ 0.009388] using mwait in idle threads.
[ 0.009389] Performance Events: Core2 events, Intel PMU driver.
[ 0.009394] ... version: 2
[ 0.009395] ... bit width: 40
[ 0.009397] ... generic registers: 2
[ 0.009398] ... value mask: 000000ffffffffff
[ 0.009399] ... max period: 000000007fffffff
[ 0.009401] ... fixed-purpose events: 3
[ 0.009402] ... event mask: 0000000700000003
[ 0.010271] ACPI: Core revision 20090903
[ 0.016085] Setting APIC routing to flat
[ 0.016392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056705] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.060001] Booting processor 1 APIC 0x3 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU 1/0x3 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 3
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.144081] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.144087] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.148071] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#2
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU 2/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU2: Thermal monitoring enabled (TM2)
[ 0.236073] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.236078] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.240098] Booting processor 3 APIC 0x2 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU 3/0x2 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 2
[ 0.008000] CPU3: Thermal monitoring enabled (TM2)
[ 0.328042] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.328048] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.332012] Brought up 4 CPUs
[ 0.332015] Total of 4 processors activated (19200.77 BogoMIPS).
[ 0.334018] CPU0 attaching sched-domain:
[ 0.334022] domain 0: span 0,2 level MC
[ 0.334024] groups: group ffff88000540fbf0 cpus 0 group ffff88000550fbf0 cpus 2
[ 0.334029] domain 1: span 0-3 level CPU
[ 0.334031] groups: group ffff88000540fd00 cpus 0,2 (cpu_power = 2048) group ffff88000548fd00 cpus 1,3 (cpu_power = 2048)
[ 0.334039] CPU1 attaching sched-domain:
[ 0.334041] domain 0: span 1,3 level MC
[ 0.334043] groups: group ffff88000548fbf0 cpus 1 group ffff88000558fbf0 cpus 3
[ 0.334047] domain 1: span 0-3 level CPU
[ 0.334049] groups: group ffff88000548fd00 cpus 1,3 (cpu_power = 2048) group ffff88000540fd00 cpus 0,2 (cpu_power = 2048)
[ 0.334055] CPU2 attaching sched-domain:
[ 0.334057] domain 0: span 0,2 level MC
[ 0.334059] groups: group ffff88000550fbf0 cpus 2 group ffff88000540fbf0 cpus 0
[ 0.334063] domain 1: span 0-3 level CPU
[ 0.334065] groups: group ffff88000540fd00 cpus 0,2 (cpu_power = 2048) group ffff88000548fd00 cpus 1,3 (cpu_power = 2048)
[ 0.334071] CPU3 attaching sched-domain:
[ 0.334073] domain 0: span 1,3 level MC
[ 0.334075] groups: group ffff88000558fbf0 cpus 3 group ffff88000548fbf0 cpus 1
[ 0.334079] domain 1: span 0-3 level CPU
[ 0.334080] groups: group ffff88000548fd00 cpus 1,3 (cpu_power = 2048) group ffff88000540fd00 cpus 0,2 (cpu_power = 2048)
[ 0.334197] devtmpfs: initialized
[ 0.336891] regulator: core version 0.5
[ 0.336891] NET: Registered protocol family 16
[ 0.336891] ACPI: bus type pci registered
[ 0.336891] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.336891] PCI: MCFG area at f0000000 reserved in E820
[ 0.338510] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.338511] PCI: Using configuration type 1 for base access
[ 0.340021] bio: create slab <bio-0> at 0
[ 0.340443] ACPI: EC: Look up EC in DSDT
[ 0.346275] ACPI: Interpreter enabled
[ 0.346285] ACPI: (supports S0 S1 S4 S5)
[ 0.346307] ACPI: Using IOAPIC for interrupt routing
[ 0.350529] ACPI: No dock devices found.
[ 0.350622] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.350720] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.350723] pci 0000:00:01.0: PME# disabled
[ 0.350772] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.350774] pci 0000:00:06.0: PME# disabled
[ 0.350854] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.350857] pci 0000:00:1c.0: PME# disabled
[ 0.350926] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.350929] pci 0000:00:1c.3: PME# disabled
[ 0.350996] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.351000] pci 0000:00:1c.4: PME# disabled
[ 0.351067] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.351070] pci 0000:00:1c.5: PME# disabled
[ 0.351192] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.351195] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.351260] pci 0000:00:1f.2: reg 10 io port: [0xe600-0xe607]
[ 0.351265] pci 0000:00:1f.2: reg 14 io port: [0xe700-0xe703]
[ 0.351270] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
[ 0.351275] pci 0000:00:1f.2: reg 1c io port: [0xe900-0xe903]
[ 0.351280] pci 0000:00:1f.2: reg 20 io port: [0xea00-0xea1f]
[ 0.351285] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb102000-0xfb1027ff]
[ 0.351323] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.351326] pci 0000:00:1f.2: PME# disabled
[ 0.351350] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb103000-0xfb1030ff]
[ 0.351362] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.351403] pci 0000:01:00.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff]
[ 0.351410] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.351418] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xe0000000-0xe1ffffff]
[ 0.351423] pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f]
[ 0.351427] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.351486] pci 0000:01:00.1: reg 10 32bit mmio: [0xf6000000-0xf6003fff]
[ 0.351635] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
[ 0.351638] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf6ffffff]
[ 0.351641] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff]
[ 0.351672] pci 0000:00:06.0: bridge io port: [0x9000-0x9fff]
[ 0.351707] pci 0000:00:1c.0: bridge io port: [0x8000-0x8fff]
[ 0.351745] pci 0000:00:1c.3: bridge io port: [0xb000-0xbfff]
[ 0.351748] pci 0000:00:1c.3: bridge 32bit mmio: [0xfb000000-0xfb0fffff]
[ 0.351803] pci 0000:05:00.0: reg 10 io port: [0xc000-0xc0ff]
[ 0.351823] pci 0000:05:00.0: reg 18 64bit mmio: [0xf8000000-0xf8000fff]
[ 0.351844] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.351919] pci 0000:05:00.0: supports D1 D2
[ 0.351920] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.351925] pci 0000:05:00.0: PME# disabled
[ 0.351960] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.352034] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.352038] pci 0000:00:1c.4: bridge 32bit mmio: [0xf7000000-0xf8ffffff]
[ 0.352093] pci 0000:06:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.352114] pci 0000:06:00.0: reg 18 64bit mmio: [0xfa000000-0xfa000fff]
[ 0.352143] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.352218] pci 0000:06:00.0: supports D1 D2
[ 0.352220] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.352225] pci 0000:06:00.0: PME# disabled
[ 0.352259] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.352324] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[ 0.352327] pci 0000:00:1c.5: bridge 32bit mmio: [0xf9000000-0xfaffffff]
[ 0.352371] pci 0000:00:1e.0: transparent bridge
[ 0.352375] pci 0000:00:1e.0: bridge io port: [0x7000-0x7fff]
[ 0.352403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.352540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.352592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.352648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.352693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.352738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.359755] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.359840] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.359922] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.360013] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.360099] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.360192] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.360274] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.360357] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.360452] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.360456] vgaarb: loaded
[ 0.360472] PCI: Using ACPI for IRQ routing
[ 0.360472] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.360472] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.360472] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.368019] Switching to clocksource tsc
[ 0.369124] pnp: PnP ACPI init
[ 0.369143] ACPI: bus type pnp registered
[ 0.371125] pnp: PnP ACPI: found 13 devices
[ 0.371126] ACPI: ACPI bus type pnp unregistered
[ 0.371135] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.371138] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.371141] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.371143] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.371146] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.371152] system 00:09: ioport range 0x400-0x4bf has been reserved
[ 0.371157] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.371162] system 00:0b: iomem range 0xd1e00-0xd3fff has been reserved
[ 0.371164] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.371167] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.371169] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 0.371172] system 00:0b: iomem range 0xcfee0000-0xcfefffff could not be reserved
[ 0.371175] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.371177] system 00:0b: iomem range 0x100000-0xcfedffff could not be reserved
[ 0.371180] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.371183] system 00:0b: iomem range 0xfed10000-0xfed1dfff has been reserved
[ 0.371185] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.371188] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.371190] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.371197] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.371199] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
[ 0.375990] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.375992] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.375996] pci 0000:00:01.0: MEM window: 0xf4000000-0xf6ffffff
[ 0.375999] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000efffffff
[ 0.376002] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[ 0.376004] pci 0000:00:06.0: IO window: 0x9000-0x9fff
[ 0.376007] pci 0000:00:06.0: MEM window: disabled
[ 0.376009] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.376013] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.376015] pci 0000:00:1c.0: IO window: 0x8000-0x8fff
[ 0.376019] pci 0000:00:1c.0: MEM window: 0xfb200000-0xfb3fffff
[ 0.376023] pci 0000:00:1c.0: PREFETCH window: 0x000000fb400000-0x000000fb5fffff
[ 0.376028] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.376030] pci 0000:00:1c.3: IO window: 0xb000-0xbfff
[ 0.376035] pci 0000:00:1c.3: MEM window: 0xfb000000-0xfb0fffff
[ 0.376038] pci 0000:00:1c.3: PREFETCH window: 0x000000fb600000-0x000000fb7fffff
[ 0.376044] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[ 0.376046] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.376050] pci 0000:00:1c.4: MEM window: 0xf7000000-0xf8ffffff
[ 0.376054] pci 0000:00:1c.4: PREFETCH window: 0xfb800000-0xfb9fffff
[ 0.376059] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
[ 0.376061] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 0.376066] pci 0000:00:1c.5: MEM window: 0xf9000000-0xfaffffff
[ 0.376069] pci 0000:00:1c.5: PREFETCH window: 0xfba00000-0xfbbfffff
[ 0.376074] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 0.376076] pci 0000:00:1e.0: IO window: 0x7000-0x7fff
[ 0.376080] pci 0000:00:1e.0: MEM window: disabled
[ 0.376083] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.376093] alloc irq_desc for 16 on node -1
[ 0.376095] alloc kstat_irqs on node -1
[ 0.376099] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.376103] pci 0000:00:01.0: setting latency timer to 64
[ 0.376107] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.376110] pci 0000:00:06.0: setting latency timer to 64
[ 0.376117] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.376120] pci 0000:00:1c.0: setting latency timer to 64
[ 0.376126] alloc irq_desc for 19 on node -1
[ 0.376128] alloc kstat_irqs on node -1
[ 0.376131] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.376134] pci 0000:00:1c.3: setting latency timer to 64
[ 0.376141] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.376144] pci 0000:00:1c.4: setting latency timer to 64
[ 0.376151] alloc irq_desc for 17 on node -1
[ 0.376152] alloc kstat_irqs on node -1
[ 0.376155] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.376158] pci 0000:00:1c.5: setting latency timer to 64
[ 0.376164] pci 0000:00:1e.0: setting latency timer to 64
[ 0.376167] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.376170] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.376172] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.376174] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf6ffffff]
[ 0.376176] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xefffffff]
[ 0.376178] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
[ 0.376180] pci_bus 0000:03: resource 0 io: [0x8000-0x8fff]
[ 0.376182] pci_bus 0000:03: resource 1 mem: [0xfb200000-0xfb3fffff]
[ 0.376184] pci_bus 0000:03: resource 2 pref mem [0xfb400000-0xfb5fffff]
[ 0.376186] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.376188] pci_bus 0000:04: resource 1 mem: [0xfb000000-0xfb0fffff]
[ 0.376190] pci_bus 0000:04: resource 2 pref mem [0xfb600000-0xfb7fffff]
[ 0.376192] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
[ 0.376194] pci_bus 0000:05: resource 1 mem: [0xf7000000-0xf8ffffff]
[ 0.376204] pci_bus 0000:05: resource 2 pref mem [0xfb800000-0xfb9fffff]
[ 0.376206] pci_bus 0000:06: resource 0 io: [0xd000-0xdfff]
[ 0.376208] pci_bus 0000:06: resource 1 mem: [0xf9000000-0xfaffffff]
[ 0.376210] pci_bus 0000:06: resource 2 pref mem [0xfba00000-0xfbbfffff]
[ 0.376212] pci_bus 0000:07: resource 0 io: [0x7000-0x7fff]
[ 0.376214] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 0.376216] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.376246] NET: Registered protocol family 2
[ 0.376391] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.377354] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.380552] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.381032] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.381034] TCP reno registered
[ 0.381149] NET: Registered protocol family 1
[ 0.381189] pci 0000:01:00.0: Boot video device
[ 0.381246] Unpacking initramfs...
[ 0.562958] Freeing initrd memory: 8648k freed
[ 0.566357] audit: initializing netlink socket (disabled)
[ 0.566370] type=2000 audit(1346204975.564:1): initialized
[ 0.569343] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.570700] VFS: Disk quotas dquot_6.5.2
[ 0.570770] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.570861] msgmni has been set to 7928
[ 0.571190] alg: No test for stdrng (krng)
[ 0.571247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.571249] io scheduler noop registered
[ 0.571251] io scheduler anticipatory registered
[ 0.571252] io scheduler deadline registered
[ 0.571299] io scheduler cfq registered (default)
[ 0.571387] alloc irq_desc for 24 on node -1
[ 0.571388] alloc kstat_irqs on node -1
[ 0.571398] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.571403] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.571473] alloc irq_desc for 25 on node -1
[ 0.571475] alloc kstat_irqs on node -1
[ 0.571479] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X
[ 0.571484] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.571558] alloc irq_desc for 26 on node -1
[ 0.571560] alloc kstat_irqs on node -1
[ 0.571566] pcieport 0000:00:1c.0: irq 26 for MSI/MSI-X
[ 0.571572] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.571669] alloc irq_desc for 27 on node -1
[ 0.571671] alloc kstat_irqs on node -1
[ 0.571677] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.571683] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.571776] alloc irq_desc for 28 on node -1
[ 0.571778] alloc kstat_irqs on node -1
[ 0.571784] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.571790] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.571885] alloc irq_desc for 29 on node -1
[ 0.571887] alloc kstat_irqs on node -1
[ 0.571893] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
[ 0.571899] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.573174] Linux agpgart interface v0.103
[ 0.573204] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.573505] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.573555] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.573892] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.573901] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.573978] mice: PS/2 mouse device common for all mice
[ 0.574010] rtc_cmos 00:04: RTC can wake from S4
[ 0.574042] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.574065] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.574075] cpuidle: using governor ladder
[ 0.574076] cpuidle: using governor menu
[ 0.574080] No iBFT detected.
[ 0.574337] TCP cubic registered
[ 0.574427] NET: Registered protocol family 10
[ 0.575022] Mobile IPv6
[ 0.575025] NET: Registered protocol family 17
[ 0.575093] PM: Resume from disk failed.
[ 0.575100] registered taskstats version 1
[ 0.575408] rtc_cmos 00:04: setting system clock to 2012-08-29 01:49:36 UTC (1346204976)
[ 0.575446] Initalizing network drop monitor service
[ 0.575475] Freeing unused kernel memory: 592k freed
[ 0.575624] Write protecting the kernel read-only data: 4224k
[ 0.589018] udev[76]: starting version 164
[ 0.591839] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.614454] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.614478] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.614534] r8169 0000:05:00.0: setting latency timer to 64
[ 0.614593] alloc irq_desc for 30 on node -1
[ 0.614595] alloc kstat_irqs on node -1
[ 0.614612] r8169 0000:05:00.0: irq 30 for MSI/MSI-X
[ 0.615106] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc9000066a000, 00:1a:4d:57:0f:24, XID 18000000 IRQ 30
[ 0.615124] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.615139] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.615173] r8169 0000:06:00.0: setting latency timer to 64
[ 0.615225] alloc irq_desc for 31 on node -1
[ 0.615227] alloc kstat_irqs on node -1
[ 0.615239] r8169 0000:06:00.0: irq 31 for MSI/MSI-X
[ 0.615886] r8169 0000:06:00.0: eth1: RTL8168b/8111b at 0xffffc9000063c000, 00:1a:4d:57:0f:14, XID 18000000 IRQ 31
[ 0.628413] SCSI subsystem initialized
[ 0.639881] libata version 3.00 loaded.
[ 0.642585] ahci 0000:00:1f.2: version 3.0
[ 0.642600] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.642644] alloc irq_desc for 32 on node -1
[ 0.642646] alloc kstat_irqs on node -1
[ 0.642656] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 0.642695] ahci: SSS flag set, parallel bus scan disabled
[ 0.642724] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.642727] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems.
[ 0.642731] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.680841] scsi0 : ahci
[ 0.680956] scsi1 : ahci
[ 0.681023] scsi2 : ahci
[ 0.681096] scsi3 : ahci
[ 0.681167] scsi4 : ahci
[ 0.681246] scsi5 : ahci
[ 0.681415] ata1: SATA max UDMA/133 abar m2048@0xfb102000 port 0xfb102100 irq 32
[ 0.681418] ata2: SATA max UDMA/133 abar m2048@0xfb102000 port 0xfb102180 irq 32
[ 0.681420] ata3: SATA max UDMA/133 abar m2048@0xfb102000 port 0xfb102200 irq 32
[ 0.681423] ata4: SATA max UDMA/133 abar m2048@0xfb102000 port 0xfb102280 irq 32
[ 0.681425] ata5: SATA max UDMA/133 abar m2048@0xfb102000 port 0xfb102300 irq 32
[ 0.681427] ata6: SATA max UDMA/133 abar m2048@0xfb102000 port 0xfb102380 irq 32
[ 1.164199] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.165285] ata1.00: HPA detected: current 488395055, native 488397168
[ 1.165293] ata1.00: ATA-8: ST250DM000-1BC141, JC4B, max UDMA/133
[ 1.165296] ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.166661] ata1.00: configured for UDMA/133
[ 1.184663] scsi 0:0:0:0: Direct-Access ATA ST250DM000-1BC14 JC4B PQ: 0 ANSI: 5
[ 1.508034] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.848024] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.188024] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.528044] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.868024] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.888441] sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[ 2.888497] sd 0:0:0:0: [sda] Write Protect is off
[ 2.888499] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.888526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.888666] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 2.917129] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.199662] PM: Starting manual resume from disk
[ 3.199665] PM: Resume from partition 8:5
[ 3.199666] PM: Checking hibernation image.
[ 3.199816] PM: Error -22 checking image file
[ 3.199818] PM: Resume from disk failed.
[ 3.254836] kjournald starting. Commit interval 5 seconds
[ 3.254844] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.347743] udev[393]: starting version 164
[ 4.593838] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.593845] ACPI: Power Button [PWRB]
[ 4.593910] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.593913] ACPI: Power Button [PWRF]
[ 4.596889] processor LNXCPU:00: registered as cooling_device0
[ 4.597640] ACPI: SSDT 00000000cfee8380 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 4.597814] processor LNXCPU:01: registered as cooling_device1
[ 4.598018] ACPI: SSDT 00000000cfee8410 00087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 4.598190] processor LNXCPU:02: registered as cooling_device2
[ 4.598374] ACPI: SSDT 00000000cfee84a0 00087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 4.599942] EDAC MC: Ver: 2.1.0 May 6 2012
[ 4.600039] processor LNXCPU:03: registered as cooling_device3
[ 4.663078] alloc irq_desc for 18 on node -1
[ 4.663081] alloc kstat_irqs on node -1
[ 4.663087] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.668436] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.676858] EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV 0000:00:00.0
[ 5.027931] [drm] Initialized drm 1.1.0 20060810
[ 5.150949] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.204031] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.204037] nouveau 0000:01:00.0: setting latency timer to 64
[ 5.206617] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8180a2)
[ 5.207784] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 5.269510] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 5.269514] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 5.269516] [drm] nouveau 0000:01:00.0: Bios version 70.18.75.00
[ 5.269518] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[ 5.269559] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 5.269561] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 5.269564] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 5.269567] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 5.269569] [drm] nouveau 0000:01:00.0: 1: 0x00102161: type 0x61 idx 1 tag 0x08
[ 5.269572] [drm] nouveau 0000:01:00.0: 2: 0x00000200: type 0x00 idx 2 tag 0xff
[ 5.269574] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00020030
[ 5.269577] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000000
[ 5.269579] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011362 0f220010
[ 5.269580] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 01022310 00020010
[ 5.269587] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6AE8
[ 5.332045] [drm] nouveau 0000:01:00.0: 0x6DBD: Condition still not met after 20ms, skipping following opcodes
[ 5.357031] [drm] nouveau 0000:01:00.0: 0x6DC1: Condition still not met after 20ms, skipping following opcodes
[ 5.357053] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x6F9B
[ 5.380041] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x7B25
[ 5.380050] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x7B3E
[ 5.429607] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x7C25
[ 5.429609] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x7C8A
[ 5.452041] [drm] nouveau 0000:01:00.0: 0x695C: Condition still not met after 20ms, skipping following opcodes
[ 5.452049] [drm] nouveau 0000:01:00.0: 0x5770: parsing output script 0
[ 5.452053] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
[ 5.452096] [drm] nouveau 0000:01:00.0: 0x5770: parsing output script 0
[ 5.452099] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
[ 5.544916] [TTM] Zone kernel: Available graphics memory: 2030042 kiB.
[ 5.544938] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
[ 5.561201] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 5.561209] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 5.561820] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 5.561827] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 5.561829] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 5.561831] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 5.561835] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 5.561880] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 5.561902] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 5.576601] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 5.751749] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x401a0000, bo ffff88012cec9000
[ 5.760970] Console: switching to colour frame buffer device 240x67
[ 5.760981] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
[ 5.760985] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
[ 5.760989] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
[ 5.761241] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
[ 5.766054] fb0: nouveaufb frame buffer device
[ 5.766056] registered panic notifier
[ 5.766060] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 5.766102] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.766105] hda_intel: Disable MSI for Nvidia chipset
[ 5.766126] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.982960] Adding 7811064k swap on /dev/sda5. Priority:-1 extents:1 across:7811064k.
[ 7.302253] EXT3 FS on sda7, internal journal
[ 7.449675] loop: module loaded
[ 8.239347] kjournald starting. Commit interval 5 seconds
[ 8.239554] EXT3 FS on sda1, internal journal
[ 8.239559] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.263360] kjournald starting. Commit interval 5 seconds
[ 8.263561] EXT3 FS on sda6, internal journal
[ 8.263566] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.863370] r8169 0000:05:00.0: eth0: link down
[ 8.863801] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.337816] r8169 0000:06:00.0: eth1: link down
[ 9.338250] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.687835] r8169 0000:05:00.0: eth0: link up
[ 10.688296] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[свернуть]

kobzar · 29 августа 2012, 10:43:23

даже не знаю что вам сказать...
возможно ls -la /var/log наведет вас на какието мысли...

andresyto · 29 августа 2012, 10:52:14

насколько я знаю это команда выводит информацию о файлах расположенных в директории log

kobzar · 29 августа 2012, 10:58:23

правильно....
Теперь вводим команду - смотрим на список файлов и начинаем думать...
А что же нам делать с етими файлами ?

andresyto · 29 августа 2012, 11:01:29

читать содержимое файлов