Ноут перестал видеть свой экран после ковыряния с xorg.conf

[Ska1006]

Предыстория:
Решил обновится до testing, почитал инструкции, поменял siurce.list, запустил обновление, все пакеты скачались и начали распаковываться...

Начало проблем:
где-то в середине распаковки появилось сообщение в псевдографическом режиме о том, что пакет драйверов fglrx больше не поддерживает мою видеокарточку(4300/4500 series). Было предложено после установки полностью удалить пакет и установить xserver-xorg-video-radeon. С предчуствием некоторого количества проблем я согласился на этот вариант.
Почитав пару страниц гугла выяснил что помимо fglrx надо удалить ещё пару пакетов, а затем поставить всё на место но с новыми дровами. Сделал всё по инструкции(http://blog.sjinks.pro/linux/907-how-to-remove-fglrx-properly/) из режима восстановления. После чего нормальный режим таки запустился, но не стартовали иксы.

Основная проблема:
Почитав ещё гугла посмотрел файл xorg.conf, где как оказалось был прописан драйвер fglrx, и это несмотря на

Код Выделить Развернуть

dpkg-reconfigure xserver-xorg
Прислушавшись к советам гугла я решил запустить иксы с дефолтными настройками. Но сдуру решил обнулил файлик xorg.conf при помощи echo. Это было зря......
Ноут завис и решил не откликатся не на Ctrl+C не на Ctrl+Z, естественно единственным что оставолось бул принудительный ребут.
После ребута я увидел чёрный экран, даже без подсветки и радостно моргающую лампочку активности HDD. Не было даже экрана BIOSа.
Немного подумав подключил внешний монитор и на нём уже запутился дебиан с иксами. Пляски с буном, гуглом и т.п. успехом не увинчались.

Предпринятые меры:
1)Попытка воскрешения оригинального xorg.conf успехом не увенчались
2)Перепрошивка BIOS из XP(тоже не фидит моник) ничего не дала
3)Проверка настроек BIOS ничем не помогла, пропал РЕжим D-Sub only, в режиме LCD-only вывод происходит на D-Sub

Заключение:
Не думал, что такое вообще возможно. Есть-ли у Вас идеи как сие безобразие вылечить? Хотелось бы вылечить ноут т.к. он нужен по работе и учёбе.
Сообщение объединено: 08 февраля 2013, 00:47:43
UPD: Вскрыл ноут, проверил провода, визуально вроде в норме. оставил без питания на ночь, авось поможет.

[qupl]

Если экран не загорается в любой ОС и даже при старте (я так понял), то проблема на 99.9% аппаратная.
Загрузитесь с внешним монитором и выложите сюда вывод

Код Выделить Развернуть

xrandr -q
cat /var/log/Xorg.0.log

[Ska1006]

Я тоже склоняюсь к аппаратной версии, видимо просто так совпало

Код Выделить Развернуть


root@Ska1006:/home/ska1006# xrandr -q
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1360 x 1360
VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1360x768       59.8 
   1152x864       60.0 
   1024x768       60.0*
   800x600        60.3 
   640x480        59.9 
   680x384       119.6    119.9 
   576x432       120.1 
   512x384       120.0 
   400x300       120.6 
   320x240       120.1 
root@Ska1006:/home/ska1006#

разрешения не родные для внешнего моника ибо он квадратный. 1360x768 - разрешение родного экрана
удвлил из лога список дров т.к.сообщение по длинне не проходило

Код Выделить Развернуть


root@Ska1006:/home/ska1006# cat /var/log/Xorg.0.log
[    16.010]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    16.010] X Protocol Version 11, Revision 0
[    16.010] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
[    16.010] Current Operating System: Linux Ska1006 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64
[    16.011] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=9c399ba5-6d6e-482e-8f5a-67d0a69fb74e ro quiet
[    16.011] Build Date: 29 November 2012  07:18:16PM
[    16.011] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[    16.011] Current version of pixman: 0.26.0
[    16.011] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    16.011] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.011] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb  8 08:59:33 2013
[    16.016] (==) Using config file: "/etc/X11/xorg.conf"
[    16.016] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.020] (==) ServerLayout "X.org Configured"
[    16.020] (**) |-->Screen "Screen0" (0)
[    16.020] (**) |   |-->Monitor "Monitor0"
[    16.021] (**) |   |-->Device "Card0"
[    16.021] (**) |-->Screen "Screen1" (1)
[    16.021] (**) |   |-->Monitor "Monitor1"
[    16.021] (**) |   |-->Device "Card1"
[    16.021] (**) |-->Screen "Screen2" (2)
[    16.021] (**) |   |-->Monitor "Monitor2"
[    16.022] (**) |   |-->Device "Card2"
[    16.022] (**) |-->Input Device "Mouse0"
[    16.022] (**) |-->Input Device "Keyboard0"
[    16.022] (==) Automatically adding devices
[    16.022] (==) Automatically enabling devices
[    16.032] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    16.032] Entry deleted from font path.
[    16.044] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    16.044] Entry deleted from font path.
[    16.044] (**) ModulePath set to "/usr/lib/xorg/modules"
[    16.044] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    16.044] (WW) Disabling Mouse0
[    16.044] (WW) Disabling Keyboard0
[    16.044] (II) Loader magic: 0x7f2824adeae0
[    16.046] (--) PCI:*(0:1:0:0) 1002:9555:17aa:394a rev 0, Mem @ 0xe0000000/268435456, 0xf2200000/65536, I/O @ 0x00007000/256, BIOS @ 0x????????/131072
[    16.046] (II) Open ACPI successful (/var/run/acpid.socket)
[    16.046] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    16.046] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    16.046] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    16.046] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[    16.046] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    16.046] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[    16.046] (II) LoadModule: "dri"
[    16.055] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.059] (II) Module dri: vendor="X.Org Foundation"
[    16.059] compiled for 1.12.4, module version = 1.0.0
[    16.059] ABI class: X.Org Server Extension, version 6.0
[    16.059] (II) Loading extension XFree86-DRI
[    16.059] (II) LoadModule: "dbe"
[    16.060] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    16.061] (II) Module dbe: vendor="X.Org Foundation"
[    16.061] compiled for 1.12.4, module version = 1.0.0
[    16.061] Module class: X.Org Server Extension
[    16.062] ABI class: X.Org Server Extension, version 6.0
[    16.062] (II) Loading extension DOUBLE-BUFFER
[    16.062] (II) LoadModule: "glx"
[    16.062] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.067] (II) Module glx: vendor="X.Org Foundation"
[    16.067] compiled for 1.12.4, module version = 1.0.0
[    16.067] ABI class: X.Org Server Extension, version 6.0
[    16.067] (==) AIGLX enabled
[    16.068] (II) Loading extension GLX
[    16.068] (II) LoadModule: "dri2"
[    16.068] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.070] (II) Module dri2: vendor="X.Org Foundation"
[    16.070] compiled for 1.12.4, module version = 1.2.0
[    16.070] ABI class: X.Org Server Extension, version 6.0
[    16.070] (II) Loading extension DRI2
[    16.070] (II) LoadModule: "extmod"
[    16.071] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    16.075] (II) Module extmod: vendor="X.Org Foundation"
[    16.075] compiled for 1.12.4, module version = 1.0.0
[    16.075] Module class: X.Org Server Extension
[    16.075] ABI class: X.Org Server Extension, version 6.0
[    16.075] (II) Loading extension SELinux
[    16.075] (II) Loading extension MIT-SCREEN-SAVER
[    16.075] (II) Loading extension XFree86-VidModeExtension
[    16.075] (II) Loading extension XFree86-DGA
[    16.075] (II) Loading extension DPMS
[    16.075] (II) Loading extension XVideo
[    16.075] (II) Loading extension XVideo-MotionCompensation
[    16.075] (II) Loading extension X-Resource
[    16.075] (II) LoadModule: "record"
[    16.076] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.077] (II) Module record: vendor="X.Org Foundation"
[    16.077] compiled for 1.12.4, module version = 1.13.0
[    16.077] Module class: X.Org Server Extension
[    16.077] ABI class: X.Org Server Extension, version 6.0
[    16.077] (II) Loading extension RECORD
[    16.077] (II) LoadModule: "radeon"
[    16.078] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    16.087] (II) Module radeon: vendor="X.Org Foundation"
[    16.087] compiled for 1.12.4, module version = 6.14.99
[    16.087] Module class: X.Org Video Driver
[    16.087] ABI class: X.Org Video Driver, version 12.1
[    16.089] (II) LoadModule: "fbdev"
[    16.089] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    16.090] (II) Module fbdev: vendor="X.Org Foundation"
[    16.090] compiled for 1.12.1, module version = 0.4.2
[    16.090] ABI class: X.Org Video Driver, version 12.0
[    16.091] (II) LoadModule: "vesa"
[    16.091] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    16.101] (II) Module vesa: vendor="X.Org Foundation"
[    16.101] compiled for 1.12.1, module version = 2.3.1
[    16.101] Module class: X.Org Video Driver
[    16.101] ABI class: X.Org Video Driver, version 12.0
[    16.101] (II) RADEON: Driver for ATI Radeon chipsets:
#Удалил список дров, с ним всё ок
[    16.115] (II) FBDEV: driver for framebuffer: fbdev
[    16.115] (II) VESA: driver for VESA chipsets: vesa
[    16.115] (++) using VT number 7
[    16.122] (II) [KMS] drm report modesetting isn't supported.
[    16.122] (WW) Falling back to old probe method for fbdev
[    16.122] (II) Loading sub module "fbdevhw"
[    16.122] (II) LoadModule: "fbdevhw"
[    16.122] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.124] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.124] compiled for 1.12.4, module version = 0.0.2
[    16.124] ABI class: X.Org Video Driver, version 12.1
[    16.124] (EE) open /dev/fb0: No such file or directory
[    16.124] (WW) Falling back to old probe method for vesa
[    16.124] (II) RADEON(0): TOTO SAYS 00000000f2200000
[    16.124] (II) RADEON(0): MMIO registers at 0x00000000f2200000: size 64KB
[    16.125] (II) RADEON(0): PCI bus 1 card 0 func 0
[    16.125] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    16.125] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    16.125] (==) RADEON(0): Default visual is TrueColor
[    16.125] (II) Loading sub module "vgahw"
[    16.125] (II) LoadModule: "vgahw"
[    16.125] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    16.126] (II) Module vgahw: vendor="X.Org Foundation"
[    16.126] compiled for 1.12.4, module version = 0.1.0
[    16.126] ABI class: X.Org Video Driver, version 12.1
[    16.126] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    16.126] (==) RADEON(0): RGB weight 888
[    16.126] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    16.126] (--) RADEON(0): Chipset: "ATI Mobility Radeon 4500 Series" (ChipID = 0x9555)
[    16.126] (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
[    16.126] (II) RADEON(0): PCIE card detected
[    16.127] (II) Loading sub module "int10"
[    16.127] (II) LoadModule: "int10"
[    16.127] (II) Loading /usr/lib/xorg/modules/libint10.so
[    16.129] (II) Module int10: vendor="X.Org Foundation"
[    16.129] compiled for 1.12.4, module version = 1.0.0
[    16.129] ABI class: X.Org Video Driver, version 12.1
[    16.129] (II) RADEON(0): initializing int10
[    16.135] (II) RADEON(0): Primary V_BIOS segment is: 0xc000
[    16.136] (II) RADEON(0): ATOM BIOS detected
[    16.139] (II) RADEON(0): ATOM BIOS Rom:
[    16.139] SubsystemVendorID: 0x17aa SubsystemID: 0x394a
[    16.139] IOBaseAddress: 0x7000
[    16.139] Filename: BR35193.001
[    16.139] BIOS Bootup Message:
BR35193.001 M93 DDR3 64bit 550e/800m                                       
[    16.139] (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
[    16.139] (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffec
[    16.139] (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
[    16.139] (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffec
[    16.139] (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
[    16.139] (II) RADEON(0): Default Engine Clock: 550000
[    16.139] (II) RADEON(0): Default Memory Clock: 800000
[    16.139] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[    16.139] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
[    16.139] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 16000
[    16.139] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 6000
[    16.139] (II) RADEON(0): Maximum Pixel Clock: 400000
[    16.139] (II) RADEON(0): Reference Clock: 27000
[    16.139] drmOpenDevice: node name is /dev/dri/card0
[    16.140] drmOpenDevice: open result is 9, (OK)
[    16.140] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    16.140] drmOpenDevice: node name is /dev/dri/card0
[    16.140] drmOpenDevice: open result is 9, (OK)
[    16.140] drmOpenByBusid: drmOpenMinor returns 9
[    16.140] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    16.141] (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.33.0
[    16.141] (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

[    16.141] (II) RADEON(0): Will try to use DMA for Xv image transfers
[    16.141] (II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
[    16.141] (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
[    16.141] (II) RADEON(0): Color tiling disabled
[    16.141] (II) Loading sub module "ddc"
[    16.141] (II) LoadModule: "ddc"
[    16.141] (II) Module "ddc" already built-in
[    16.141] (II) Loading sub module "i2c"
[    16.141] (II) LoadModule: "i2c"
[    16.141] (II) Module "i2c" already built-in
[    16.141] (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=60000 max=120000; xclk=40000
[    16.141] (II) RADEON(0): Output VGA-0 using monitor section Monitor0
[    16.141] (II) RADEON(0): I2C bus "VGA-0" initialized.
[    16.141] (II) RADEON(0): Port0:
[    16.141]   XRANDR name: VGA-0
[    16.141]   Connector: VGA
[    16.141]   CRT1: INTERNAL_KLDSCP_DAC1
[    16.141]   DDC reg: 0x7e40
[    16.141] (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
[    16.151] Dac detection success
[    16.151] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
[    16.151] finished output detect: 0
[    16.151] finished all detect
[    16.160] Dac detection success
[    16.160] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
[    16.160] (II) RADEON(0): Total number of valid Screen mode(s) added: 0
[    16.160] (II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "320x175" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "320x200" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "360x200" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "320x240" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "320x240" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "320x240" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "400x300" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "400x300" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "400x300" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "400x300" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "1024x768i" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "512x384i" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "512x384" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "512x384" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "512x384" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "576x432" (vrefresh out of range)
[    16.160] (II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "640x480" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1280x960" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "640x512" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "640x512" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "640x512" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "800x600" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "896x672" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1792x1344" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "896x672" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "928x696" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1856x1392" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "928x696" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "960x720" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1920x1440" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "960x720" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "832x624" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "416x312" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "576x432" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "576x432" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "576x432" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "576x432" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "576x432" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
[    16.161] (II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "700x525" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "700x525" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "700x525" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "700x525" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1440x900" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "720x450" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1600x1024" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "800x512" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "840x525" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "840x525" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1680x1050" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "840x525" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1680x1050" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "840x525" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1680x1050" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "840x525" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1920x1080" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "960x540" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "960x600" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1920x1440" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "960x720" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
[    16.161] (II) RADEON(0): Not using default mode "2048x1536" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "2048x1536" (vrefresh out of range)
[    16.161] (II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
[    16.161] (II) RADEON(0): Printing probed modes for output VGA-0
[    16.161] (II) RADEON(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    16.161] (II) RADEON(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    16.161] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    16.161] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    16.161] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    16.161] (II) RADEON(0): Modeline "680x384"x59.8   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    16.161] (II) RADEON(0): Modeline "680x384"x60.0   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    16.161] (II) RADEON(0): Modeline "576x432"x60.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    16.161] (II) RADEON(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    16.161] (II) RADEON(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    16.161] (II) RADEON(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    16.161] (II) RADEON(0): Output VGA-0 connected
[    16.161] (II) RADEON(0): Using exact sizes for initial modes
[    16.161] (II) RADEON(0): Output VGA-0 using initial mode 1152x864
[    16.161] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.161] (==) RADEON(0): DPI set to (96, 96)
[    16.161] (II) Loading sub module "fb"
[    16.161] (II) LoadModule: "fb"
[    16.162] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.164] (II) Module fb: vendor="X.Org Foundation"
[    16.164] compiled for 1.12.4, module version = 1.0.0
[    16.164] ABI class: X.Org ANSI C Emulation, version 0.4
[    16.164] (II) Loading sub module "ramdac"
[    16.164] (II) LoadModule: "ramdac"
[    16.164] (II) Module "ramdac" already built-in
[    16.164] (==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
[    16.164] (II) Loading sub module "exa"
[    16.164] (II) LoadModule: "exa"
[    16.165] (II) Loading /usr/lib/xorg/modules/libexa.so
[    16.167] (II) Module exa: vendor="X.Org Foundation"
[    16.167] compiled for 1.12.4, module version = 2.5.0
[    16.167] ABI class: X.Org Video Driver, version 12.1
[    16.167] (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
[    16.167] (II) UnloadModule: "fbdev"
[    16.167] (II) Unloading fbdev
[    16.167] (II) UnloadSubModule: "fbdevhw"
[    16.167] (II) Unloading fbdevhw
[    16.167] (II) UnloadModule: "vesa"
[    16.167] (II) Unloading vesa
[    16.167] (--) Depth 24 pixmap format is 32 bpp
[    16.167] (II) RADEON(0): RADEONScreenInit e0000000 0 0
[    16.333] Output CRT1 disable success
[    16.344] Blank CRTC 0 success
[    16.344] Disable CRTC memreq 0 success
[    16.344] Disable CRTC 0 success
[    16.344] Blank CRTC 1 success
[    16.344] Disable CRTC memreq 1 success
[    16.344] Disable CRTC 1 success
[    16.344] (II) RADEON(0): Dynamic Power Management Disabled
[    16.541] (==) RADEON(0): Using 24 bit depth buffer
[    16.541] mc fb loc is 00ff00e0
[    16.541] (II) RADEON(0): RADEONInitMemoryMap() :
[    16.541] (II) RADEON(0):   mem_size         : 0x20000000
[    16.541] (II) RADEON(0):   MC_FB_LOCATION   : 0x00ff00e0
[    16.541] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    16.541] (II) RADEON(0): Depth moves disabled by default
[    16.607] (II) RADEON(0): Allocating from a screen of 262080 kb
[    16.608] (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x007f8000
[    16.608] (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x007fc000
[    16.608] (II) RADEON(0): Will use 8160 kb for front buffer at offset 0x00000000
[    16.608] (II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
[    16.608] (II) RADEON(0): Will use 8160 kb for back buffer at offset 0x00800000
[    16.608] (II) RADEON(0): Will use 8160 kb for depth buffer at offset 0x00ff8000
[    16.608] (II) RADEON(0): Will use 117760 kb for textures at offset 0x017f0000
[    16.608] (II) RADEON(0): Will use 119808 kb for X Server offscreen at offset 0x08af0000
[    16.608] drmOpenDevice: node name is /dev/dri/card0
[    16.609] drmOpenDevice: open result is 9, (OK)
[    16.610] drmOpenDevice: node name is /dev/dri/card0
[    16.610] drmOpenDevice: open result is 9, (OK)
[    16.611] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    16.611] drmOpenDevice: node name is /dev/dri/card0
[    16.612] drmOpenDevice: open result is 9, (OK)
[    16.612] drmOpenByBusid: drmOpenMinor returns 9
[    16.612] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    16.612] (II) [drm] DRM interface version 1.4
[    16.612] (II) [drm] DRM open master succeeded.
[    16.612] (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
[    16.612] (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
[    16.612] (II) RADEON(0): [drm] added 1 reserved context for kernel
[    16.612] (II) RADEON(0): X context handle = 0x1
[    16.612] (II) RADEON(0): [drm] installed DRM signal handler
[    16.635] (II) RADEON(0): [pci] 32768 kB allocated with handle 0x022bf900
[    16.635] (II) RADEON(0): [pci] ring handle = 0x1b7ff000
[    16.635] (II) RADEON(0): [pci] Ring mapped at 0x7f282457e000
[    16.635] (II) RADEON(0): [pci] Ring contents 0x00000000
[    16.635] (II) RADEON(0): [pci] ring read ptr handle = 0x2b800000
[    16.635] (II) RADEON(0): [pci] Ring read ptr mapped at 0x7f28246dd000
[    16.635] (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
[    16.635] (II) RADEON(0): [pci] vertex/indirect buffers handle = 0x1b800000
[    16.635] (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7f282024b000
[    16.635] (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
[    16.635] (II) RADEON(0): [pci] GART texture map handle = 0x1b801000
[    16.635] (II) RADEON(0): [pci] GART Texture map mapped at 0x7f280d955000
[    16.635] (II) RADEON(0): [drm] register handle = 0x2fff8000
[    16.635] (II) RADEON(0): [dri] Visual configs initialized
[    16.694] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[    16.694] (II) RADEON(0):   MC_FB_LOCATION   : 0x00ff00e0 0x001f0000
[    16.694] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    16.705] (==) RADEON(0): Backing store disabled
[    16.705] (II) RADEON(0): [DRI] installation complete
[    16.743] (II) RADEON(0): [drm] removed 1 reserved context for kernel
[    16.744] (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0x2b7ff000 at 0x7f28246de000
[    16.745] (II) RADEON(0): [drm] Closed DRM master.
[    16.745] (WW) RADEON(0): Direct rendering disabled
[    16.745] (EE) RADEON(0): Acceleration initialization failed
[    16.745] (II) RADEON(0): Acceleration disabled
[    16.745] (==) RADEON(0): DPMS enabled
[    16.745] (==) RADEON(0): Silken mouse enabled
[    16.745] (II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
[    16.750] Output CRT1 disable success
[    16.750] Blank CRTC 0 success
[    16.750] Disable CRTC memreq 0 success
[    16.750] Disable CRTC 0 success
[    16.750] Blank CRTC 1 success
[    16.750] Disable CRTC memreq 1 success
[    16.750] Disable CRTC 1 success
[    16.750] Output CRT1 disable success
[    16.750] Blank CRTC 0 success
[    16.750] Disable CRTC memreq 0 success
[    16.750] Disable CRTC 0 success
[    16.750] Set CRTC 0 Source success
[    16.750] Mode 1152x864 - 1520 895 6
[    16.750] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[    16.750] (II) RADEON(0):   MC_FB_LOCATION   : 0x00ff00e0 0x00ff00e0
[    16.750] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    16.760] Picked PLL 0
[    16.760] before 8162
[    16.760] after 8162
[    16.760] best_freq: 81642
[    16.760] best_feedback_div: 127
[    16.760] best_frac_feedback_div: 0
[    16.760] best_ref_div: 3
[    16.760] best_post_div: 14
[    16.760] (II) RADEON(0): crtc(0) Clock: mode 81620, PLL 816420
[    16.760] (II) RADEON(0): crtc(0) PLL  : refdiv 3, fbdiv 0x7F(127), fracfbdiv 0, pdiv 14
[    16.763] Set CRTC 0 PLL success
[    16.763] Set CRTC Timing success
[    16.764] Set CRTC 0 Overscan success
[    16.764] Not using RMX
[    16.764] scaler 0 setup success
[    16.764] Set CRTC 0 Source success
[    16.764] crtc 0 YUV disable setup success
[    16.765] Output DAC1 setup success
[    16.765] Output CRT1 enable success
[    16.765] Enable CRTC 0 success
[    16.765] Enable CRTC memreq 0 success
[    16.765] Unblank CRTC 0 success
[    16.765] Blank CRTC 1 success
[    16.765] Disable CRTC memreq 1 success
[    16.765] Disable CRTC 1 success
[    16.765] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.765] (--) RandR disabled
[    16.765] (II) Initializing built-in extension Generic Event Extension
[    16.765] (II) Initializing built-in extension SHAPE
[    16.765] (II) Initializing built-in extension MIT-SHM
[    16.765] (II) Initializing built-in extension XInputExtension
[    16.765] (II) Initializing built-in extension XTEST
[    16.765] (II) Initializing built-in extension BIG-REQUESTS
[    16.765] (II) Initializing built-in extension SYNC
[    16.765] (II) Initializing built-in extension XKEYBOARD
[    16.765] (II) Initializing built-in extension XC-MISC
[    16.765] (II) Initializing built-in extension SECURITY
[    16.765] (II) Initializing built-in extension XINERAMA
[    16.765] (II) Initializing built-in extension XFIXES
[    16.765] (II) Initializing built-in extension RENDER
[    16.765] (II) Initializing built-in extension RANDR
[    16.765] (II) Initializing built-in extension COMPOSITE
[    16.765] (II) Initializing built-in extension DAMAGE
[    16.766] (II) SELinux: Disabled on system
[    16.793] (II) AIGLX: Screen 0 is not DRI2 capable
[    16.793] (II) AIGLX: Screen 0 is not DRI capable
[    16.887] (II) AIGLX: Loaded and initialized swrast
[    16.887] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    16.888] (II) RADEON(0): Setting screen physical size to 304 x 228
[    17.383] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    17.383] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.383] (II) LoadModule: "evdev"
[    17.383] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.385] (II) Module evdev: vendor="X.Org Foundation"
[    17.385] compiled for 1.12.1, module version = 2.7.0
[    17.385] Module class: X.Org XInput Driver
[    17.385] ABI class: X.Org XInput driver, version 16.0
[    17.385] (II) Using input driver 'evdev' for 'Power Button'
[    17.385] (**) Power Button: always reports core events
[    17.385] (**) evdev: Power Button: Device: "/dev/input/event4"
[    17.385] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.385] (--) evdev: Power Button: Found keys
[    17.385] (II) evdev: Power Button: Configuring as keyboard
[    17.385] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    17.385] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.385] (**) Option "xkb_rules" "evdev"
[    17.385] (**) Option "xkb_model" "pc105"
[    17.385] (**) Option "xkb_layout" "us,ru"
[    17.385] (**) Option "xkb_variant" ","
[    17.385] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    17.623] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    17.623] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    17.623] (II) Using input driver 'evdev' for 'Video Bus'
[    17.623] (**) Video Bus: always reports core events
[    17.623] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    17.623] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    17.623] (--) evdev: Video Bus: Found keys
[    17.623] (II) evdev: Video Bus: Configuring as keyboard
[    17.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input5/event5"
[    17.624] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    17.624] (**) Option "xkb_rules" "evdev"
[    17.624] (**) Option "xkb_model" "pc105"
[    17.624] (**) Option "xkb_layout" "us,ru"
[    17.624] (**) Option "xkb_variant" ","
[    17.624] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    17.624] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    17.624] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.624] (II) Using input driver 'evdev' for 'Power Button'
[    17.624] (**) Power Button: always reports core events
[    17.624] (**) evdev: Power Button: Device: "/dev/input/event1"
[    17.624] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.624] (--) evdev: Power Button: Found keys
[    17.624] (II) evdev: Power Button: Configuring as keyboard
[    17.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    17.624] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    17.624] (**) Option "xkb_rules" "evdev"
[    17.624] (**) Option "xkb_model" "pc105"
[    17.624] (**) Option "xkb_layout" "us,ru"
[    17.624] (**) Option "xkb_variant" ","
[    17.624] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    17.625] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    17.625] (II) No input driver specified, ignoring this device.
[    17.625] (II) This device may have been added with another device file.
[    17.625] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    17.625] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    17.625] (II) Using input driver 'evdev' for 'Sleep Button'
[    17.625] (**) Sleep Button: always reports core events
[    17.625] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    17.625] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    17.625] (--) evdev: Sleep Button: Found keys
[    17.625] (II) evdev: Sleep Button: Configuring as keyboard
[    17.625] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    17.625] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    17.625] (**) Option "xkb_rules" "evdev"
[    17.625] (**) Option "xkb_model" "pc105"
[    17.625] (**) Option "xkb_layout" "us,ru"
[    17.625] (**) Option "xkb_variant" ","
[    17.625] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    17.626] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event7)
[    17.626] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[    17.626] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[    17.626] (**) Lenovo EasyCamera: always reports core events
[    17.626] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event7"
[    17.626] (--) evdev: Lenovo EasyCamera: Vendor 0x90c Product 0x37b1
[    17.626] (--) evdev: Lenovo EasyCamera: Found keys
[    17.626] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[    17.626] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input7/event7"
[    17.626] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 10)
[    17.626] (**) Option "xkb_rules" "evdev"
[    17.626] (**) Option "xkb_model" "pc105"
[    17.626] (**) Option "xkb_layout" "us,ru"
[    17.626] (**) Option "xkb_variant" ","
[    17.626] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    17.627] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    17.627] (II) No input driver specified, ignoring this device.
[    17.627] (II) This device may have been added with another device file.
[    17.627] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    17.627] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    17.627] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    17.627] (**) AT Translated Set 2 keyboard: always reports core events
[    17.627] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    17.627] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    17.627] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    17.627] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    17.627] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    17.627] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    17.627] (**) Option "xkb_rules" "evdev"
[    17.627] (**) Option "xkb_model" "pc105"
[    17.627] (**) Option "xkb_layout" "us,ru"
[    17.627] (**) Option "xkb_variant" ","
[    17.627] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    17.628] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event10)
[    17.628] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    17.628] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    17.628] (**) PS/2 Mouse: always reports core events
[    17.628] (**) evdev: PS/2 Mouse: Device: "/dev/input/event10"
[    17.628] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    17.628] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    17.628] (--) evdev: PS/2 Mouse: Found relative axes
[    17.628] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    17.628] (II) evdev: PS/2 Mouse: Configuring as mouse
[    17.628] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    17.628] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.628] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[    17.628] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 12)
[    17.628] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    17.628] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    17.628] (**) PS/2 Mouse: (accel) acceleration profile 0
[    17.628] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    17.628] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    17.628] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[    17.629] (II) No input driver specified, ignoring this device.
[    17.629] (II) This device may have been added with another device file.
[    17.629] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
[    17.629] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    17.629] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    17.629] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[    17.629] (II) LoadModule: "synaptics"
[    17.629] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    17.632] (II) Module synaptics: vendor="X.Org Foundation"
[    17.632] compiled for 1.12.4, module version = 1.6.2
[    17.632] Module class: X.Org XInput Driver
[    17.632] ABI class: X.Org XInput driver, version 16.0
[    17.632] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    17.632] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    17.632] (**) Option "Device" "/dev/input/event11"
[    17.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[    17.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[    17.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    17.668] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    17.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    17.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    17.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    17.669] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    17.669] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    17.676] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[    17.676] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
[    17.676] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    17.676] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[    17.676] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[    17.677] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    17.677] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    17.677] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    17.677] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    17.677] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    17.678] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    17.678] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    17.679] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[    17.679] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    17.679] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    17.679] (**) Ideapad extra buttons: always reports core events
[    17.679] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event8"
[    17.679] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    17.679] (--) evdev: Ideapad extra buttons: Found keys
[    17.679] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    17.679] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input8/event8"
[    17.679] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 14)
[    17.679] (**) Option "xkb_rules" "evdev"
[    17.679] (**) Option "xkb_model" "pc105"
[    17.679] (**) Option "xkb_layout" "us,ru"
[    17.679] (**) Option "xkb_variant" ","
[    17.679] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    17.681] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    17.681] (II) No input driver specified, ignoring this device.
[    17.681] (II) This device may have been added with another device file.
[    17.682] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
[    17.682] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    17.682] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    17.682] (**) ACPI Virtual Keyboard Device: always reports core events
[    17.682] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
[    17.682] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    17.682] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    17.682] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    17.682] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[    17.682] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15)
[    17.682] (**) Option "xkb_rules" "evdev"
[    17.682] (**) Option "xkb_model" "pc105"
[    17.682] (**) Option "xkb_layout" "us,ru"
[    17.682] (**) Option "xkb_variant" ","
[    17.682] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    17.709] Dac detection success
[    17.709] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
[    17.709] (II) RADEON(0): Total number of valid Screen mode(s) added: 0
[    19.003] Dac detection success
[    19.003] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
[    19.003] (II) RADEON(0): Total number of valid Screen mode(s) added: 0
[    26.268] Dac detection success
[    26.268] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
[    26.268] (II) RADEON(0): Total number of valid Screen mode(s) added: 0
[    26.442] Output CRT1 disable success
[    26.446] Blank CRTC 0 success
[    26.446] Disable CRTC memreq 0 success
[    26.463] Disable CRTC 0 success
[    26.463] Blank CRTC 1 success
[    26.463] Disable CRTC memreq 1 success
[    26.463] Disable CRTC 1 success
[    26.468] Output CRT1 disable success
[    26.468] Blank CRTC 0 success
[    26.468] Disable CRTC memreq 0 success
[    26.468] Disable CRTC 0 success
[    26.468] Set CRTC 0 Source success
[    26.468] Mode 1024x768 - 1344 806 10
[    26.468] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[    26.468] (II) RADEON(0):   MC_FB_LOCATION   : 0x00ff00e0 0x00ff00e0
[    26.468] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    26.478] Picked PLL 0
[    26.478] before 6500
[    26.478] after 6500
[    26.479] best_freq: 65000
[    26.479] best_feedback_div: 130
[    26.479] best_frac_feedback_div: 0
[    26.479] best_ref_div: 3
[    26.479] best_post_div: 18
[    26.479] (II) RADEON(0): crtc(0) Clock: mode 65000, PLL 650000
[    26.479] (II) RADEON(0): crtc(0) PLL  : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 18
[    26.482] Set CRTC 0 PLL success
[    26.482] Set CRTC Timing success
[    26.483] Set CRTC 0 Overscan success
[    26.483] Not using RMX
[    26.483] scaler 0 setup success
[    26.483] Set CRTC 0 Source success
[    26.483] crtc 0 YUV disable setup success
[    26.483] Output DAC1 setup success
[    26.483] Output CRT1 enable success
[    26.483] Enable CRTC 0 success
[    26.484] Enable CRTC memreq 0 success
[    26.484] Unblank CRTC 0 success
[    26.484] Blank CRTC 1 success
[    26.484] Disable CRTC memreq 1 success
[    26.484] Disable CRTC 1 success
[    27.717] Dac detection success
[    27.717] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
[    27.717] (II) RADEON(0): Total number of valid Screen mode(s) added: 0
[    29.920] Dac detection success
[    29.920] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
[    29.920] (II) RADEON(0): Total number of valid Screen mode(s) added: 0
root@Ska1006:/home/ska1006#


[qupl]

Тогда - BIOS, его настройки, железо. Может быть проблема возникла ПОСЛЕ обновления BIOS ?

[Ska1006]

Может быть проблема возникла ПОСЛЕ обновления BIOS ?

увы - нет, БИОС прошил на туже версию что и была уже после поломки.

настройки проверил несколько раз, видать придётся новый покупать, жаль

[PbI6A]

Если случилась какая-то аппаратная проблема в момент обновления системы - это интересное стечение обстоятельств. А что, в городе никто не делает ремонт?

[Ska1006]

Сношу в СЦ как будет время, благо я в Москве