Автор Тема: Lightdm vs Slim  (Прочитано 4976 раз)

0 Пользователей и 1 Гость просматривают эту тему.

cinyflo

  • Гость
Lightdm vs Slim
« : 14 Апреля 2013, 21:55:37 »
Раньше использовал lightdm, после ввода пароля всё загружалось практически моментально. Сейчас решил поставить slim, всё нравится, но после ввода пароля ещё приходится ждать минимум полминуты чтобы появился рабочий стол. Не знаю даже как сформулировать вопрос, но мне это не нравится.
 

Оффлайн Malaheenee

Re: Lightdm vs Slim
« Ответ #1 : 15 Апреля 2013, 09:33:51 »
А у нас зато эти полминуты переезжают на запуск Lightdm. Так что в итоге никакого выигрыша.
Воспользовавшись случаем, спросим: как заставить DM показывать себя только на одном мониторе из связки TwinView, а не ровно посередине между двумя?
Все мы где-то, когда-то и в чем-то были новичками.
 

Оффлайн Brainey

Re: Lightdm vs Slim
« Ответ #2 : 15 Апреля 2013, 12:25:20 »
Раньше использовал lightdm, после ввода пароля всё загружалось практически моментально. Сейчас решил поставить slim, всё нравится, но после ввода пароля ещё приходится ждать минимум полминуты чтобы появился рабочий стол. Не знаю даже как сформулировать вопрос, но мне это не нравится.
А чем не нравился lightdm?
PS: стоит посмотреть в логи иксов.
Конференция форума в jabber: debianforum@conference.jabber.ru | Клуб кедоводов: kde@conference.jabber.ru
 

cinyflo

  • Гость
Re: Lightdm vs Slim
« Ответ #3 : 15 Апреля 2013, 13:36:08 »
Да всем нравился, просто решил что попроще поставить. Причём когда я ставлю на убунту (на этом же компе) и на другой комп с дебианом - он запускается мгновенно. А на моём такая вот лажа. Причём если включить комп, и не сразу данные вводить, а подождать эти полминуты, то потом грузится сразу же после ввода пароля.
Логов много, какой именно файл? Когда и что смотреть? А то я по логам не очень шарю.
 

Оффлайн qupl

Re: Lightdm vs Slim
« Ответ #4 : 15 Апреля 2013, 13:51:47 »
/var/log/Xorg.0.log

cinyflo

  • Гость
Re: Lightdm vs Slim
« Ответ #5 : 15 Апреля 2013, 14:52:29 »
/var/log/Xorg.0.log
[    19.975]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    19.975] X Protocol Version 11, Revision 0
[    19.975] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    19.975] Current Operating System: Linux debian 3.2.0-4-686-pae #1 SMP Debian 3.2.41-2 i686
[    19.975] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=02af526e-07e3-4c51-86aa-d7a77e8e732f ro nomodeset quiet vga=0x031a
[    19.975] Build Date: 23 February 2013  06:25:22PM
[    19.975] xorg-server 2:1.12.4-5 (Julien Cristau <jcristau@debian.org>)
[    19.975] Current version of pixman: 0.26.0
[    19.975] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    19.975] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.975] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 15 15:28:08 2013
[    20.036] (==) Using config file: "/etc/X11/xorg.conf"
[    20.036] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.096] (==) ServerLayout "aticonfig Layout"
[    20.096] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    20.096] (**) |   |-->Monitor "<default monitor>"
[    20.118] (**) |   |-->Device "aticonfig-Device[0]-0"
[    20.118] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[    20.118] (==) Automatically adding devices
[    20.118] (==) Automatically enabling devices
[    20.223] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.223] Entry deleted from font path.
[    20.248] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    20.248] Entry deleted from font path.
[    20.248] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[    20.248] (==) ModulePath set to "/usr/lib/xorg/modules"
[    20.248] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.248] (II) Loader magic: 0xb779e5a0
[    20.248] (II) Module ABI versions:
[    20.248] X.Org ANSI C Emulation: 0.4
[    20.248] X.Org Video Driver: 12.1
[    20.248] X.Org XInput driver : 16.0
[    20.248] X.Org Server Extension : 6.0
[    20.250] (--) PCI:*(0:1:0:0) 1002:6759:1043:0403 rev 0, Mem @ 0xd0000000/268435456, 0xfebc0000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    20.250] (II) Open ACPI successful (/var/run/acpid.socket)
[    20.250] (II) "extmod" will be loaded by default.
[    20.250] (II) "dbe" will be loaded by default.
[    20.250] (II) "glx" will be loaded by default.
[    20.250] (II) "record" will be loaded by default.
[    20.250] (II) "dri" will be loaded by default.
[    20.250] (II) "dri2" will be loaded by default.
[    20.250] (II) LoadModule: "extmod"
[    20.434] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    20.451] (II) Module extmod: vendor="X.Org Foundation"
[    20.451] compiled for 1.12.4, module version = 1.0.0
[    20.451] Module class: X.Org Server Extension
[    20.451] ABI class: X.Org Server Extension, version 6.0
[    20.451] (II) Loading extension SELinux
[    20.451] (II) Loading extension MIT-SCREEN-SAVER
[    20.451] (II) Loading extension XFree86-VidModeExtension
[    20.451] (II) Loading extension XFree86-DGA
[    20.451] (II) Loading extension DPMS
[    20.451] (II) Loading extension XVideo
[    20.451] (II) Loading extension XVideo-MotionCompensation
[    20.451] (II) Loading extension X-Resource
[    20.451] (II) LoadModule: "dbe"
[    20.452] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    20.467] (II) Module dbe: vendor="X.Org Foundation"
[    20.467] compiled for 1.12.4, module version = 1.0.0
[    20.467] Module class: X.Org Server Extension
[    20.467] ABI class: X.Org Server Extension, version 6.0
[    20.467] (II) Loading extension DOUBLE-BUFFER
[    20.467] (II) LoadModule: "glx"
[    20.467] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    20.557] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    20.558] compiled for 6.9.0, module version = 1.0.0
[    20.558] (II) Loading extension GLX
[    20.558] (II) LoadModule: "record"
[    20.559] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    20.579] (II) Module record: vendor="X.Org Foundation"
[    20.579] compiled for 1.12.4, module version = 1.13.0
[    20.579] Module class: X.Org Server Extension
[    20.579] ABI class: X.Org Server Extension, version 6.0
[    20.580] (II) Loading extension RECORD
[    20.580] (II) LoadModule: "dri"
[    20.580] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    20.750] (II) Module dri: vendor="X.Org Foundation"
[    20.750] compiled for 1.12.4, module version = 1.0.0
[    20.750] ABI class: X.Org Server Extension, version 6.0
[    20.750] (II) Loading extension XFree86-DRI
[    20.750] (II) LoadModule: "dri2"
[    20.750] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    20.766] (II) Module dri2: vendor="X.Org Foundation"
[    20.766] compiled for 1.12.4, module version = 1.2.0
[    20.767] ABI class: X.Org Server Extension, version 6.0
[    20.767] (II) Loading extension DRI2
[    20.767] (II) LoadModule: "fglrx"
[    21.058] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    21.436] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    21.436] compiled for 1.4.99.906, module version = 8.98.2
[    21.436] Module class: X.Org Video Driver
[    21.438] (II) Loading sub module "fglrxdrm"
[    21.438] (II) LoadModule: "fglrxdrm"
[    21.438] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    21.446] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    21.446] compiled for 1.4.99.906, module version = 8.98.2
[    21.446] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[    21.446] (II) AMD Proprietary Linux Driver Release Identifier: 8.982.13                             
[    21.446] (II) AMD Proprietary Linux Driver Build Date: Jul 19 2012 20:59:41
[    21.446] (++) using VT number 7

[    21.485] (WW) Falling back to old probe method for fglrx
[    21.740] (II) Loading PCS database from /etc/ati/amdpcsdb
[    21.765] (--) Chipset Supported AMD Graphics Processor (0x6759) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[    21.765] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    21.765] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    21.765] (II) AMD Video driver is signed
[    21.766] (II) fglrx(0): pEnt->device->identifier=0xb8599cb8
[    21.766] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    21.766] (II) Loading sub module "vgahw"
[    21.766] (II) LoadModule: "vgahw"
[    21.766] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    21.787] (II) Module vgahw: vendor="X.Org Foundation"
[    21.787] compiled for 1.12.4, module version = 0.1.0
[    21.787] ABI class: X.Org Video Driver, version 12.1
[    21.787] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    21.787] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    21.787] (==) fglrx(0): Default visual is TrueColor
[    21.787] (==) fglrx(0): RGB weight 888
[    21.787] (II) fglrx(0): Using 8 bits per RGB
[    21.787] (==) fglrx(0): Buffer Tiling is ON
[    21.788] (II) Loading sub module "fglrxdrm"
[    21.788] (II) LoadModule: "fglrxdrm"
[    21.788] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    21.788] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    21.788] compiled for 1.4.99.906, module version = 8.98.2
[    21.790] ukiDynamicMajor: found major device number 251
[    21.790] ukiDynamicMajor: found major device number 251
[    21.790] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    21.790] ukiOpenDevice: node name is /dev/ati/card0
[    21.790] ukiOpenDevice: open result is 13, (OK)
[    21.790] ukiOpenByBusid: ukiOpenMinor returns 13
[    21.790] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    21.791] (**) fglrx(0): NoAccel = NO
[    21.791] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    21.791] (--) fglrx(0): Chipset: "AMD Radeon HD 6570" (Chipset = 0x6759)
[    21.791] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x0403)
[    21.791] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    21.791] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    21.791] (--) fglrx(0): MMIO registers at 0xfebc0000
[    21.791] (--) fglrx(0): I/O port at 0x0000d000
[    21.791] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    21.848] (II) fglrx(0): AC Adapter is used
[    21.916] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    21.940] (II) Loading sub module "vbe"
[    21.940] (II) LoadModule: "vbe"
[    21.941] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    21.949] (II) Module vbe: vendor="X.Org Foundation"
[    21.949] compiled for 1.12.4, module version = 1.1.0
[    21.949] ABI class: X.Org Video Driver, version 12.1
[    21.949] (II) fglrx(0): VESA BIOS detected
[    21.949] (II) fglrx(0): VESA VBE Version 3.0
[    21.949] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    21.949] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[    21.949] (II) fglrx(0): VESA VBE OEM Software Rev: 13.11
[    21.949] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[    21.949] (II) fglrx(0): VESA VBE OEM Product: 101
[    21.949] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    21.990] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    21.990] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    21.990] (II) fglrx(0): PCIE card detected
[    21.990] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    21.990] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    21.994] (II) fglrx(0): Using adapter: 1:0.0.
[    22.024] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    22.110] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[    22.110] (II) fglrx(0): RandR 1.2 support is enabled!
[    22.110] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    22.110] (==) fglrx(0): Center Mode is disabled
[    22.110] (II) Loading sub module "fb"
[    22.110] (II) LoadModule: "fb"
[    22.110] (II) Loading /usr/lib/xorg/modules/libfb.so
[    22.126] (II) Module fb: vendor="X.Org Foundation"
[    22.126] compiled for 1.12.4, module version = 1.0.0
[    22.126] ABI class: X.Org ANSI C Emulation, version 0.4
[    22.126] (II) Loading sub module "ddc"
[    22.126] (II) LoadModule: "ddc"
[    22.126] (II) Module "ddc" already built-in
[    22.457] (II) fglrx(0): Finished Initialize PPLIB!
[    22.474] (II) fglrx(0): Output DFP1 has no monitor section
[    22.474] (II) fglrx(0): Output DFP2 has no monitor section
[    22.474] (II) fglrx(0): Output CRT1 using monitor section 0-CRT1
[    22.474] (**) fglrx(0): Option "PreferredMode" "1280x1024"
[    22.474] (**) fglrx(0): Option "Position" "0 0"
[    22.474] (**) fglrx(0): Option "Disable" "false"
[    22.474] (**) fglrx(0): Option "Rotate" "normal"
[    22.474] (**) fglrx(0): Option "TargetRefresh" "75"
[    22.474] (II) Loading sub module "ddc"
[    22.474] (II) LoadModule: "ddc"
[    22.474] (II) Module "ddc" already built-in
[    22.474] (II) fglrx(0): Connected Display0: CRT1
[    22.474] (II) fglrx(0): Display0 EDID data ---------------------------
[    22.474] (II) fglrx(0): Manufacturer: GSM  Model: 43f1  Serial#: 229150
[    22.474] (II) fglrx(0): Year: 2005  Week: 11
[    22.474] (II) fglrx(0): EDID Version: 1.3
[    22.474] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    22.474] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[    22.474] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[    22.474] (II) fglrx(0): Gamma: 2.20
[    22.474] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    22.474] (II) fglrx(0): First detailed timing is preferred mode
[    22.474] (II) fglrx(0): redX: 0.641 redY: 0.342   greenX: 0.292 greenY: 0.611
[    22.474] (II) fglrx(0): blueX: 0.147 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
[    22.474] (II) fglrx(0): Supported established timings:
[    22.474] (II) fglrx(0): 720x400@70Hz
[    22.474] (II) fglrx(0): 640x480@60Hz
[    22.474] (II) fglrx(0): 640x480@75Hz
[    22.474] (II) fglrx(0): 800x600@60Hz
[    22.474] (II) fglrx(0): 800x600@75Hz
[    22.474] (II) fglrx(0): 832x624@75Hz
[    22.474] (II) fglrx(0): 1024x768@60Hz
[    22.474] (II) fglrx(0): 1024x768@75Hz
[    22.474] (II) fglrx(0): 1280x1024@75Hz
[    22.474] (II) fglrx(0): 1152x864@75Hz
[    22.474] (II) fglrx(0): Manufacturer's mask: 0
[    22.474] (II) fglrx(0): Supported standard timings:
[    22.474] (II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
[    22.474] (II) fglrx(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
[    22.474] (II) fglrx(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
[    22.474] (II) fglrx(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    22.474] (II) fglrx(0): Supported detailed timing:
[    22.474] (II) fglrx(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    22.474] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    22.474] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    22.474] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    22.474] (II) fglrx(0): Monitor name: L1751SQ
[    22.474] (II) fglrx(0): Monitor name:
[    22.474] (II) fglrx(0): EDID (in hex):
[    22.474] (II) fglrx(0): 00ffffffffffff001e6df1431e7f0300
[    22.475] (II) fglrx(0): 0b0f01036e221b78ea2ee5a4574a9c25
[    22.475] (II) fglrx(0): 115054a56b80314f454f614f81800101
[    22.475] (II) fglrx(0): 010101010101302a009851002a403070
[    22.475] (II) fglrx(0): 1300520e1100001e000000fd00384b1e
[    22.475] (II) fglrx(0): 530e000a202020202020000000fc004c
[    22.475] (II) fglrx(0): 3137353153510a2020202020000000fc
[    22.475] (II) fglrx(0): 00200a202020202020202020202000af
[    22.475] (II) fglrx(0): End of Display0 EDID data --------------------
[    22.475] (II) fglrx(0): EDID for output DFP1
[    22.475] (II) fglrx(0): EDID for output DFP2
[    22.475] (II) fglrx(0): EDID for output CRT1
[    22.475] (II) fglrx(0): Manufacturer: GSM  Model: 43f1  Serial#: 229150
[    22.475] (II) fglrx(0): Year: 2005  Week: 11
[    22.475] (II) fglrx(0): EDID Version: 1.3
[    22.475] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    22.475] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[    22.475] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[    22.475] (II) fglrx(0): Gamma: 2.20
[    22.475] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    22.475] (II) fglrx(0): First detailed timing is preferred mode
[    22.475] (II) fglrx(0): redX: 0.641 redY: 0.342   greenX: 0.292 greenY: 0.611
[    22.475] (II) fglrx(0): blueX: 0.147 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
[    22.475] (II) fglrx(0): Supported established timings:
[    22.475] (II) fglrx(0): 720x400@70Hz
[    22.475] (II) fglrx(0): 640x480@60Hz
[    22.475] (II) fglrx(0): 640x480@75Hz
[    22.475] (II) fglrx(0): 800x600@60Hz
[    22.475] (II) fglrx(0): 800x600@75Hz
[    22.475] (II) fglrx(0): 832x624@75Hz
[    22.475] (II) fglrx(0): 1024x768@60Hz
[    22.475] (II) fglrx(0): 1024x768@75Hz
[    22.475] (II) fglrx(0): 1280x1024@75Hz
[    22.475] (II) fglrx(0): 1152x864@75Hz
[    22.475] (II) fglrx(0): Manufacturer's mask: 0
[    22.475] (II) fglrx(0): Supported standard timings:
[    22.475] (II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
[    22.475] (II) fglrx(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
[    22.475] (II) fglrx(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
[    22.475] (II) fglrx(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    22.475] (II) fglrx(0): Supported detailed timing:
[    22.475] (II) fglrx(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    22.475] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    22.475] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    22.475] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    22.475] (II) fglrx(0): Monitor name: L1751SQ
[    22.475] (II) fglrx(0): Monitor name:
[    22.475] (II) fglrx(0): EDID (in hex):
[    22.475] (II) fglrx(0): 00ffffffffffff001e6df1431e7f0300
[    22.475] (II) fglrx(0): 0b0f01036e221b78ea2ee5a4574a9c25
[    22.475] (II) fglrx(0): 115054a56b80314f454f614f81800101
[    22.475] (II) fglrx(0): 010101010101302a009851002a403070
[    22.475] (II) fglrx(0): 1300520e1100001e000000fd00384b1e
[    22.475] (II) fglrx(0): 530e000a202020202020000000fc004c
[    22.475] (II) fglrx(0): 3137353153510a2020202020000000fc
[    22.475] (II) fglrx(0): 00200a202020202020202020202000af
[    22.475] (II) fglrx(0): Printing probed modes for output CRT1
[    22.475] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    22.475] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    22.475] (II) fglrx(0): Modeline "1280x960"x75.0  135.00  1280 1296 1440 1688  960 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    22.475] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1328 1440 1688  960 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    22.475] (II) fglrx(0): Modeline "1280x768"x75.0  135.00  1280 1296 1440 1688  768 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    22.475] (II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1328 1440 1688  768 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    22.475] (II) fglrx(0): Modeline "1280x720"x75.0  135.00  1280 1296 1440 1688  720 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    22.475] (II) fglrx(0): Modeline "1280x720"x60.0  108.00  1280 1328 1440 1688  720 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    22.475] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    22.475] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    22.475] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    22.475] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    22.475] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    22.475] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    22.475] (II) fglrx(0): Output DFP1 disconnected
[    22.475] (II) fglrx(0): Output DFP2 disconnected
[    22.475] (II) fglrx(0): Output CRT1 connected
[    22.475] (II) fglrx(0): Using user preference for initial modes
[    22.475] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[    22.475] (II) fglrx(0): DPI set to (96, 96)
[    22.476] (II) fglrx(0): Eyefinity capable adapter detected.
[    22.476] (II) fglrx(0): Adapter AMD Radeon HD 6570 has 6 configurable heads and 1 displays connected.
[    22.476] (==) fglrx(0):  PseudoColor visuals disabled
[    22.476] (II) Loading sub module "ramdac"
[    22.476] (II) LoadModule: "ramdac"
[    22.476] (II) Module "ramdac" already built-in
[    22.476] (==) fglrx(0): NoDRI = NO
[    22.476] (==) fglrx(0): Capabilities: 0x00000000
[    22.476] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    22.476] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    22.476] (==) fglrx(0): UseFastTLS=0
[    22.476] (--) Depth 24 pixmap format is 32 bpp
[    22.476] (II) Loading extension ATIFGLRXDRI
[    22.476] (II) fglrx(0): doing swlDriScreenInit
[    22.476] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    22.476] ukiDynamicMajor: found major device number 251
[    22.476] ukiDynamicMajor: found major device number 251
[    22.476] ukiDynamicMajor: found major device number 251
[    22.476] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    22.476] ukiOpenDevice: node name is /dev/ati/card0
[    22.476] ukiOpenDevice: open result is 14, (OK)
[    22.476] ukiOpenByBusid: ukiOpenMinor returns 14
[    22.476] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    22.476] (II) fglrx(0): [uki] DRM interface version 1.0
[    22.476] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    22.476] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    22.476] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6164000
[    22.476] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    22.476] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    22.476] (II) fglrx(0): swlDriScreenInit done
[    22.476] (II) fglrx(0): Kernel Module Version Information:
[    22.476] (II) fglrx(0):     Name: fglrx
[    22.476] (II) fglrx(0):     Version: 8.98.2
[    22.476] (II) fglrx(0):     Date: Jul 19 2012
[    22.476] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    22.476] (II) fglrx(0): Kernel Module version matches driver.
[    22.477] (II) fglrx(0): Kernel Module Build Time Information:
[    22.477] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-4-686-pae
[    22.477] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    22.477] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    22.477] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    22.477] (II) fglrx(0): [uki] register handle = 0x00004000
[    22.501] (II) fglrx(0): DRI initialization successfull
[    22.516] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01040000
[    22.519] (==) fglrx(0): Backing store disabled
[    22.519] (II) Loading extension FGLRXEXTENSION
[    22.519] (==) fglrx(0): DPMS enabled
[    22.519] (II) fglrx(0): Initialized in-driver Xinerama extension
[    22.519] (**) fglrx(0): Textured Video is enabled.
[    22.519] (II) LoadModule: "glesx"
[    22.519] (II) Loading /usr/lib/xorg/modules/glesx.so
[    22.807] (II) Module glesx: vendor="X.Org Foundation"
[    22.807] compiled for 1.4.99.906, module version = 1.0.0
[    22.807] (II) Loading extension GLESX
[    22.807] (II) fglrx(0): GLESX enableFlags = 592
[    22.808] (II) fglrx(0): GLESX is enabled
[    22.808] (II) LoadModule: "amdxmm"
[    22.809] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    22.849] (II) Module amdxmm: vendor="X.Org Foundation"
[    22.849] compiled for 1.4.99.906, module version = 2.0.0
[    22.856] (II) Loading extension AMDXVOPL
[    22.856] (II) Loading extension AMDXVBA
[    22.892] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[    22.895] (II) fglrx(0): Enable composite support successfully
[    22.895] (II) fglrx(0): X context handle = 0x1
[    22.895] (II) fglrx(0): [DRI] installation complete
[    22.895] (==) fglrx(0): Silken mouse enabled
[    22.895] (==) fglrx(0): Using HW cursor of display infrastructure!
[    22.896] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    22.904] (II) fglrx(0): User Preference Output CRT1 using refresh rate 75.0 Hz.
[    23.261] (--) RandR disabled
[    23.261] (II) Initializing built-in extension Generic Event Extension
[    23.261] (II) Initializing built-in extension SHAPE
[    23.261] (II) Initializing built-in extension MIT-SHM
[    23.261] (II) Initializing built-in extension XInputExtension
[    23.261] (II) Initializing built-in extension XTEST
[    23.261] (II) Initializing built-in extension BIG-REQUESTS
[    23.261] (II) Initializing built-in extension SYNC
[    23.261] (II) Initializing built-in extension XKEYBOARD
[    23.261] (II) Initializing built-in extension XC-MISC
[    23.261] (II) Initializing built-in extension SECURITY
[    23.261] (II) Initializing built-in extension XINERAMA
[    23.261] (II) Initializing built-in extension XFIXES
[    23.261] (II) Initializing built-in extension RENDER
[    23.261] (II) Initializing built-in extension RANDR
[    23.261] (II) Initializing built-in extension COMPOSITE
[    23.261] (II) Initializing built-in extension DAMAGE
[    23.261] (II) SELinux: Disabled on system
[    23.265] ukiDynamicMajor: found major device number 251
[    23.265] ukiDynamicMajor: found major device number 251
[    23.265] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    23.265] ukiOpenDevice: node name is /dev/ati/card0
[    23.265] ukiOpenDevice: open result is 15, (OK)
[    23.265] ukiOpenByBusid: ukiOpenMinor returns 15
[    23.266] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    24.260] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    24.846] (II) fglrx(0): Enable the clock gating!
[    24.846] (II) fglrx(0): Setting screen physical size to 338 x 270
[    25.201] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    25.201] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.201] (II) LoadModule: "evdev"
[    25.201] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.230] (II) Module evdev: vendor="X.Org Foundation"
[    25.231] compiled for 1.12.1, module version = 2.7.0
[    25.231] Module class: X.Org XInput Driver
[    25.231] ABI class: X.Org XInput driver, version 16.0
[    25.231] (II) Using input driver 'evdev' for 'Power Button'
[    25.231] (**) Power Button: always reports core events
[    25.231] (**) evdev: Power Button: Device: "/dev/input/event5"
[    25.231] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.231] (--) evdev: Power Button: Found keys
[    25.231] (II) evdev: Power Button: Configuring as keyboard
[    25.231] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    25.231] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    25.231] (**) Option "xkb_rules" "evdev"
[    25.231] (**) Option "xkb_model" "pc105"
[    25.231] (**) Option "xkb_layout" "us,ru"
[    25.231] (**) Option "xkb_variant" ","
[    25.231] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[    25.283] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    25.283] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.283] (II) Using input driver 'evdev' for 'Power Button'
[    25.283] (**) Power Button: always reports core events
[    25.283] (**) evdev: Power Button: Device: "/dev/input/event4"
[    25.283] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.283] (--) evdev: Power Button: Found keys
[    25.283] (II) evdev: Power Button: Configuring as keyboard
[    25.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"
[    25.283] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    25.283] (**) Option "xkb_rules" "evdev"
[    25.283] (**) Option "xkb_model" "pc105"
[    25.283] (**) Option "xkb_layout" "us,ru"
[    25.283] (**) Option "xkb_variant" ","
[    25.283] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[    25.285] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event7)
[    25.285] (II) No input driver specified, ignoring this device.
[    25.285] (II) This device may have been added with another device file.
[    25.285] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event0)
[    25.286] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    25.286] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    25.286] (**) USB Optical Mouse: always reports core events
[    25.286] (**) evdev: USB Optical Mouse: Device: "/dev/input/event0"
[    25.286] (--) evdev: USB Optical Mouse: Vendor 0x192f Product 0x616
[    25.286] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[    25.286] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[    25.286] (--) evdev: USB Optical Mouse: Found relative axes
[    25.286] (--) evdev: USB Optical Mouse: Found x and y relative axes
[    25.286] (II) evdev: USB Optical Mouse: Configuring as mouse
[    25.286] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[    25.286] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    25.286] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.286] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input0/event0"
[    25.286] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)
[    25.286] (II) evdev: USB Optical Mouse: initialized for relative axes.
[    25.286] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    25.287] (**) USB Optical Mouse: (accel) acceleration profile 0
[    25.287] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    25.287] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    25.287] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    25.287] (II) No input driver specified, ignoring this device.
[    25.287] (II) This device may have been added with another device file.
[    25.288] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event1)
[    25.288] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    25.288] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[    25.288] (**) Generic USB Keyboard: always reports core events
[    25.288] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event1"
[    25.288] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[    25.289] (--) evdev: Generic USB Keyboard: Found keys
[    25.289] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[    25.289] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input1/event1"
[    25.289] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
[    25.289] (**) Option "xkb_rules" "evdev"
[    25.289] (**) Option "xkb_model" "pc105"
[    25.289] (**) Option "xkb_layout" "us,ru"
[    25.289] (**) Option "xkb_variant" ","
[    25.289] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[    25.290] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event2)
[    25.290] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    25.290] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[    25.290] (**) Generic USB Keyboard: always reports core events
[    25.290] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event2"
[    25.290] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[    25.290] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
[    25.290] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
[    25.290] (--) evdev: Generic USB Keyboard: Found relative axes
[    25.291] (--) evdev: Generic USB Keyboard: Found x and y relative axes
[    25.291] (--) evdev: Generic USB Keyboard: Found keys
[    25.291] (II) evdev: Generic USB Keyboard: Configuring as mouse
[    25.291] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[    25.291] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
[    25.291] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
[    25.291] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.291] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input2/event2"
[    25.291] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
[    25.291] (**) Option "xkb_rules" "evdev"
[    25.291] (**) Option "xkb_model" "pc105"
[    25.291] (**) Option "xkb_layout" "us,ru"
[    25.291] (**) Option "xkb_variant" ","
[    25.291] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[    25.291] (II) evdev: Generic USB Keyboard: initialized for relative axes.
[    25.292] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
[    25.292] (**) Generic USB Keyboard: (accel) acceleration profile 0
[    25.292] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
[    25.292] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
[    25.293] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse1)
[    25.293] (II) No input driver specified, ignoring this device.
[    25.293] (II) This device may have been added with another device file.
[    25.293] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
[    25.293] (II) No input driver specified, ignoring this device.
[    25.293] (II) This device may have been added with another device file.
[    25.294] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    25.294] (II) No input driver specified, ignoring this device.
[    25.294] (II) This device may have been added with another device file.
[    25.312] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   129.258] (II) fglrx(0): EDID vendor "GSM", prod id 17393
[   129.258] (II) fglrx(0): Using EDID range info for horizontal sync
[   129.258] (II) fglrx(0): Using EDID range info for vertical refresh
[   129.258] (II) fglrx(0): Printing DDC gathered Modelines:
[   129.258] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   129.258] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   129.258] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   129.258] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   129.258] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   129.258] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   129.258] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   129.258] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   129.258] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   129.258] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   129.258] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   129.261] (II) fglrx(0): EDID vendor "GSM", prod id 17393
[   129.261] (II) fglrx(0): Using hsync ranges from config file
[   129.261] (II) fglrx(0): Using vrefresh ranges from config file
[   129.261] (II) fglrx(0): Printing DDC gathered Modelines:
[   129.261] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   129.261] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   129.261] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   129.261] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   129.261] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   129.261] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   129.262] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   129.262] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   129.262] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   129.262] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   129.262] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
 

Оффлайн ogost

Re: Lightdm vs Slim
« Ответ #6 : 16 Апреля 2013, 10:11:35 »
[    25.312] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   129.258] (II) fglrx(0): EDID vendor "GSM", prod id 17393
дисейблить Randr? другие предложения?

Оффлайн qupl

Re: Lightdm vs Slim
« Ответ #7 : 16 Апреля 2013, 10:15:44 »
дисейблить Randr? другие предложения?
Или побороться с долгим запросом EDID ? :)

cinyflo

  • Гость
Re: Lightdm vs Slim
« Ответ #8 : 16 Апреля 2013, 11:49:31 »
ogost, qupl, мне бы тоже самое, но по простому. ::)
 

Оффлайн qupl

Re: Lightdm vs Slim
« Ответ #9 : 16 Апреля 2013, 12:17:18 »
cinyflo, проще не знаю как сказать. Проприетарный драйвер ATI что-то делает 100 секунд (я считаю, что получает от монитора информацию EDID, возможно не прав).

Оффлайн ogost

Re: Lightdm vs Slim
« Ответ #10 : 16 Апреля 2013, 12:38:12 »
qupl, я так понимаю, что между 25.312 и 129.258 - задержка Randr, аж целых 102 секунды. а получение EDID начинается на 129.258 и заканчивается там же, меньше чем за секунду, не? То ли Вы, то ли я неправильно читаем логи  ;D

Оффлайн qupl

Re: Lightdm vs Slim
« Ответ #11 : 16 Апреля 2013, 13:00:13 »
ogost,  всё может быть, не претендую на истину.

Оффлайн PbI6A

Re: Lightdm vs Slim
« Ответ #12 : 17 Апреля 2013, 05:29:58 »
Кто-нить знает, почему дебиану религия запрещает lxdm?
LINUX means: Linux Is Not a UniX
 

Оффлайн ogost

Re: Lightdm vs Slim
« Ответ #13 : 17 Апреля 2013, 15:19:38 »
из вики lxde
Цитировать
LXDM is the lightweight display manager aimed to replace gdm in LXDE distros. The UI is implemented with GTK+. It is still in early stages of development. The most recent version is 0.4.1, which was released on July 29, 2011.
думаю, не запрещает, а ждут когда допилят. стабильность дебиановская таки.

yura_n

  • Гость
Re: Lightdm vs Slim
« Ответ #14 : 17 Апреля 2013, 17:04:10 »
Воспользовавшись случаем, спросим: как заставить DM показывать себя только на одном мониторе из связки TwinView, а не ровно посередине между двумя?
В случае Slim нужно отредактировать используемую тему.

Сообщение объединено: 17 Апреля 2013, 17:33:38
Я сбросил в качестве образца измененную тему Slim на http://rusfolder.com/36029712 . Она должна работать (у меня во всяком случае работала, когда я использовал Slim), однако скорее всего потребуется подобрать фоновую картинку в соответствии с разрешением экрана. Не изменяйте ее название.
« Последнее редактирование: 17 Апреля 2013, 17:33:38 от yura_n »
 

Теги:
     

    как вернуть все как было до установки lightdm?

    Автор longstreet

    Ответов: 5
    Просмотров: 1609
    Последний ответ 04 Июля 2016, 09:42:25
    от alsoijw
    lightdm ввод пароля

    Автор lionet

    Ответов: 1
    Просмотров: 670
    Последний ответ 18 Декабря 2019, 13:38:11
    от lionet
    Lightdm logo не меняется

    Автор doctor@tardis

    Ответов: 10
    Просмотров: 2433
    Последний ответ 01 Января 2015, 19:50:41
    от doctor@tardis
    Изменить размер окна входа lightdm

    Автор mexx

    Ответов: 0
    Просмотров: 1001
    Последний ответ 25 Июня 2017, 19:37:08
    от mexx
    [Решено] Как отключить lightdm ?

    Автор anoobis

    Ответов: 10
    Просмотров: 6029
    Последний ответ 19 Декабря 2016, 10:25:33
    от ferum