Автор Тема: [Решено] Не стартует DHCP  (Прочитано 10340 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн Krishnoved

[Решено] Не стартует DHCP
« : 14 Июля 2013, 21:34:38 »
Здравствуйте.

Я использую несколько лет дистрибы семейства Debian уже около 3-ех лет как desktop систему.
Но вот решил опробовать ее как серверную. Решил начать с раздачи dhcp адрессации через Wi-Fi коммутатор.

Использовал руководство приведенное на этом ресурсе:
https://debian.pro/246

мой конфиг я приложил внизу документа.

Проблема:

/etc/init.d/isc-dhcp-server restart
[FAIL] Stopping ISC DHCP server: dhcpd failed!
[FAIL] Starting ISC DHCP server: dhcpd[....] check syslog for diagnostics. ... failed!
 failed!
Т.е. DHCP не стартует.

На что следует обратить внимание?
« Последнее редактирование: 15 Июля 2013, 12:40:43 от Krishnoved »
 

Оффлайн qupl

Re: Не стартует DHCP
« Ответ #1 : 14 Июля 2013, 21:36:46 »
На это ?
Цитировать
check syslog for diagnostics

Оффлайн Krishnoved

Re: Не стартует DHCP
« Ответ #2 : 14 Июля 2013, 21:43:56 »
На это ?
Цитировать
check syslog for diagnostics

 ::)
в /var/log/messages
Jul 14 21:43:15 syshome dhcpd: Internet Systems Consortium DHCP Server 4.2.2
Jul 14 21:43:15 domen dhcpd: Copyright 2004-2011 Internet Systems Consortium.
Jul 14 21:43:15 domen dhcpd: All rights reserved.
Jul 14 21:43:15 domen dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Jul 14 21:43:18 domen dhcpd: Internet Systems Consortium DHCP Server 4.2.2
Jul 14 21:43:18 domen dhcpd: Copyright 2004-2011 Internet Systems Consortium.
Jul 14 21:43:18 domen dhcpd: All rights reserved.
Jul 14 21:43:18 domen dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Jul 14 21:43:18 domen dhcpd: Internet Systems Consortium DHCP Server 4.2.2
Jul 14 21:43:18 domen dhcpd: Copyright 2004-2011 Internet Systems Consortium.
Jul 14 21:43:18 domen dhcpd: All rights reserved.
Jul 14 21:43:18 domen dhcpd: For info, please visit https://www.isc.org/software/dhcp/

в dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 00000000000ea000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
[    0.000000]  BIOS-e820: 000000004fff0000 - 000000004fff8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000004fff8000 - 0000000050000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI: ECS L7S7A2/L7S7A2, BIOS 07.00T 04/02/01
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x4fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FF0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 base 0D0000000 mask FF8000000 write-combining
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[    0.000000] RAMDISK: 369ee000 - 374ef000
[    0.000000] ACPI: RSDP 000fa2d0 00014 (v00 AMI   )
[    0.000000] ACPI: RSDT 4fff0000 0002C (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
[    0.000000] ACPI: FACP 4fff0030 00081 (v01 AMIINT SiS740XX 00000011 MSFT 0100000B)
[    0.000000] ACPI: DSDT 4fff0110 03586 (v01    SiS      740 00000100 MSFT 0100000D)
[    0.000000] ACPI: FACS 4fff8000 00040
[    0.000000] ACPI: APIC 4fff00c0 00050 (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 389MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0004fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0004fff0
[    0.000000] On node 0 totalpages: 327551
[    0.000000] free_area_init_node: node 0, pgdat c1410740, node_mem_map f5fee200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 780 pages used for memmap
[    0.000000]   HighMem zone: 99046 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[    0.000000] PM: Registered nosave memory: 00000000000e8000 - 00000000000ea000
[    0.000000] PM: Registered nosave memory: 00000000000ea000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79e7000 s33280 r0 d24064 u57344
[    0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 324991
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=45a79098-6a88-4373-8fe1-1d05bebb406f ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0004fff0)
[    0.000000] Memory: 1282584k/1310656k available (2851k kernel code, 27620k reserved, 1340k data, 416k init, 399304k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc1419000 - 0xc1481000   ( 416 kB)
[    0.000000]       .data : 0xc12c8fc0 - 0xc1418100   (1340 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c8fc0   (2851 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1870.958 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3741.91 BogoMIPS (lpj=7483832)
[    0.004011] pid_max: default: 32768 minimum: 301
[    0.004083] Security Framework initialized
[    0.004097] AppArmor: AppArmor disabled by boot time parameter
[    0.004122] Mount-cache hash table entries: 512
[    0.004380] Initializing cgroup subsys cpuacct
[    0.004390] Initializing cgroup subsys memory
[    0.004407] Initializing cgroup subsys devices
[    0.004412] Initializing cgroup subsys freezer
[    0.004416] Initializing cgroup subsys net_cls
[    0.004420] Initializing cgroup subsys blkio
[    0.004432] Initializing cgroup subsys perf_event
[    0.004478] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[    0.004487] mce: CPU supports 4 MCE banks
[    0.004550] SMP alternatives: switching to UP code
[    0.008807] Freeing SMP alternatives: 8k freed
[    0.008817] ACPI: Core revision 20110623
[    0.012149] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.012631] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.052391] CPU0: AMD Athlon(tm) XP 2500+ stepping 00
[    0.056003] Performance Events: AMD PMU driver.
[    0.056003] ... version:                0
[    0.056003] ... bit width:              48
[    0.056003] ... generic registers:      4
[    0.056003] ... value mask:             0000ffffffffffff
[    0.056003] ... max period:             00007fffffffffff
[    0.056003] ... fixed-purpose events:   0
[    0.056003] ... event mask:             000000000000000f
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] Brought up 1 CPUs
[    0.056003] Total of 1 processors activated (3741.91 BogoMIPS).
[    0.056003] devtmpfs: initialized
[    0.056003] PM: Registering ACPI NVS region at 4fff8000 (32768 bytes)
[    0.056003] print_constraints: dummy:
[    0.056003] NET: Registered protocol family 16
[    0.056003] ACPI: bus type pci registered
[    0.056505] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
[    0.056509] PCI: Using configuration type 1 for base access
[    0.057633] bio: create slab <bio-0> at 0
[    0.057762] ACPI: Added _OSI(Module Device)
[    0.057766] ACPI: Added _OSI(Processor Device)
[    0.057770] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.057773] ACPI: Added _OSI(Processor Aggregator Device)
[    0.058518] ACPI: EC: Look up EC in DSDT
[    0.062835] ACPI: Interpreter enabled
[    0.062845] ACPI: (supports S0 S1 S4 S5)
[    0.062874] ACPI: Using IOAPIC for interrupt routing
[    0.064249] ACPI: Power Resource [FDDP] (off)
[    0.064600] ACPI: Power Resource [URP1] (off)
[    0.065030] ACPI: Power Resource [URP2] (off)
[    0.065647] ACPI: Power Resource [LPTP] (off)
[    0.068533] ACPI: No dock devices found.
[    0.068537] HEST: Table not found.
[    0.068544] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.068982] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.069174] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.069179] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.069184] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.069188] pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored)
[    0.069192] pci_root PNP0A03:00: host bridge window [mem 0x50000000-0xffdfffff] (ignored)
[    0.069196] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
[    0.069226] pci 0000:00:00.0: [1039:0746] type 0 class 0x000600
[    0.069242] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff]
[    0.069342] pci 0000:00:01.0: [1039:0002] type 1 class 0x000604
[    0.069403] pci 0000:00:02.0: [1039:0008] type 0 class 0x000601
[    0.069489] pci 0000:00:02.0: Enabling SiS 96x SMBus
[    0.069520] pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05
[    0.069578] pci 0000:00:02.1: reg 20: [io  0x0c00-0x0c1f]
[    0.069632] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
[    0.069700] pci 0000:00:02.5: reg 20: [io  0xff00-0xff0f]
[    0.069758] pci 0000:00:02.7: [1039:7012] type 0 class 0x000401
[    0.069781] pci 0000:00:02.7: reg 10: [io  0xc400-0xc4ff]
[    0.069794] pci 0000:00:02.7: reg 14: [io  0xc000-0xc07f]
[    0.069881] pci 0000:00:02.7: supports D1 D2
[    0.069885] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.069911] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
[    0.069929] pci 0000:00:03.0: reg 10: [mem 0xcffed000-0xcffedfff]
[    0.070018] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
[    0.070036] pci 0000:00:03.1: reg 10: [mem 0xcffee000-0xcffeefff]
[    0.070126] pci 0000:00:03.2: [1039:7002] type 0 class 0x000c03
[    0.070148] pci 0000:00:03.2: reg 10: [mem 0xcffef000-0xcffeffff]
[    0.070241] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.070280] pci 0000:00:04.0: [1039:0900] type 0 class 0x000200
[    0.070303] pci 0000:00:04.0: reg 10: [io  0xbc00-0xbcff]
[    0.070317] pci 0000:00:04.0: reg 14: [mem 0xcffec000-0xcffecfff]
[    0.070370] pci 0000:00:04.0: reg 30: [mem 0xcffc0000-0xcffdffff pref]
[    0.070407] pci 0000:00:04.0: supports D1 D2
[    0.070410] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.070450] pci 0000:00:0b.0: [10ec:8139] type 0 class 0x000200
[    0.070472] pci 0000:00:0b.0: reg 10: [io  0xb800-0xb8ff]
[    0.070486] pci 0000:00:0b.0: reg 14: [mem 0xcffebf00-0xcffebfff]
[    0.070540] pci 0000:00:0b.0: reg 30: [mem 0xcffb0000-0xcffbffff pref]
[    0.070576] pci 0000:00:0b.0: supports D1 D2
[    0.070579] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot
[    0.070613] pci 0000:00:0d.0: [1106:3249] type 0 class 0x000104
[    0.070636] pci 0000:00:0d.0: reg 10: [io  0xdc00-0xdc0f]
[    0.070650] pci 0000:00:0d.0: reg 14: [io  0xd800-0xd80f]
[    0.070664] pci 0000:00:0d.0: reg 18: [io  0xd400-0xd40f]
[    0.070678] pci 0000:00:0d.0: reg 1c: [io  0xd000-0xd00f]
[    0.070691] pci 0000:00:0d.0: reg 20: [io  0xcc00-0xcc1f]
[    0.070705] pci 0000:00:0d.0: reg 24: [io  0xc800-0xc8ff]
[    0.070719] pci 0000:00:0d.0: reg 30: [mem 0xcfff0000-0xcfffffff pref]
[    0.070825] pci 0000:01:00.0: [10de:02e1] type 0 class 0x000300
[    0.070847] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
[    0.070860] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff pref]
[    0.070873] pci 0000:01:00.0: reg 18: [mem 0xcd000000-0xcdffffff]
[    0.070912] pci 0000:01:00.0: reg 30: [mem 0xcfee0000-0xcfefffff pref]
[    0.070990] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[    0.071000] pci 0000:00:01.0:   bridge window [mem 0xcbd00000-0xcfefffff]
[    0.071008] pci 0000:00:01.0:   bridge window [mem 0xaba00000-0xcbbfffff pref]
[    0.071020] pci_bus 0000:00: on NUMA node 0
[    0.071025] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.071283]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.073644] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.073727] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.073806] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.073896] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.073974] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.074052] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.074138] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.074217] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.074441] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.074446] vgaarb: loaded
[    0.074448] vgaarb: bridge control possible 0000:01:00.0
[    0.074546] PCI: Using ACPI for IRQ routing
[    0.074582] PCI: pci_cache_line_size set to 32 bytes
[    0.074657] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.074662] reserve RAM buffer: 000000004fff0000 - 000000004fffffff
[    0.078206] pnp: PnP ACPI init
[    0.078251] ACPI: bus type pnp registered
[    0.078460] pnp 00:00: [bus 00-ff]
[    0.078466] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.078470] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.078474] pnp 00:00: [io  0x0d00-0xffff window]
[    0.078478] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.078482] pnp 00:00: [mem 0x000cb000-0x000dffff window]
[    0.078486] pnp 00:00: [mem 0x50000000-0xffdfffff window]
[    0.078490] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
[    0.078600] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.078724] pnp 00:01: [io  0x0010-0x001f]
[    0.078729] pnp 00:01: [io  0x0020-0x003f]
[    0.078732] pnp 00:01: [io  0x0044-0x005f]
[    0.078736] pnp 00:01: [io  0x0062-0x0063]
[    0.078739] pnp 00:01: [io  0x0065-0x006f]
[    0.078742] pnp 00:01: [io  0x0072-0x007f]
[    0.078745] pnp 00:01: [io  0x0080]
[    0.078748] pnp 00:01: [io  0x0084-0x0086]
[    0.078752] pnp 00:01: [io  0x0088]
[    0.078755] pnp 00:01: [io  0x008c-0x008e]
[    0.078758] pnp 00:01: [io  0x0090-0x009f]
[    0.078761] pnp 00:01: [io  0x00a0-0x00bf]
[    0.078764] pnp 00:01: [io  0x00e0-0x00ef]
[    0.078768] pnp 00:01: [io  0x0290-0x0297]
[    0.078771] pnp 00:01: [io  0x0480-0x048f]
[    0.078774] pnp 00:01: [io  0x04d0-0x04d1]
[    0.078778] pnp 00:01: [io  0x0c00-0x0c1f]
[    0.078781] pnp 00:01: [io  0x03f0-0x03f1]
[    0.078785] pnp 00:01: [mem 0xfee00000-0xfeefffff]
[    0.078893] system 00:01: [io  0x0290-0x0297] has been reserved
[    0.078898] system 00:01: [io  0x0480-0x048f] has been reserved
[    0.078903] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.078908] system 00:01: [io  0x0c00-0x0c1f] has been reserved
[    0.078912] system 00:01: [io  0x03f0-0x03f1] has been reserved
[    0.078919] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.078924] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.078961] pnp 00:02: [dma 4]
[    0.078965] pnp 00:02: [io  0x0000-0x000f]
[    0.078968] pnp 00:02: [io  0x0081-0x0083]
[    0.078972] pnp 00:02: [io  0x0087]
[    0.078978] pnp 00:02: [io  0x0089-0x008b]
[    0.078981] pnp 00:02: [io  0x008f]
[    0.078984] pnp 00:02: [io  0x00c0-0x00df]
[    0.079031] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.079051] pnp 00:03: [io  0x0070-0x0071]
[    0.079076] pnp 00:03: [irq 8]
[    0.079130] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.079146] pnp 00:04: [io  0x0061]
[    0.079192] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.079209] pnp 00:05: [io  0x00f0-0x00ff]
[    0.079218] pnp 00:05: [irq 13]
[    0.079260] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.079312] pnp 00:06: [irq 12]
[    0.079367] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.079405] pnp 00:07: [io  0x0060]
[    0.079409] pnp 00:07: [io  0x0064]
[    0.079417] pnp 00:07: [irq 1]
[    0.079476] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.079610] pnp 00:08: [io  0x03f2-0x03f3]
[    0.079615] pnp 00:08: [io  0x03f4-0x03f5]
[    0.079618] pnp 00:08: [io  0x03f7]
[    0.079626] pnp 00:08: [irq 6]
[    0.079629] pnp 00:08: [dma 2]
[    0.079707] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.080033] pnp 00:09: [io  0x03f8-0x03ff]
[    0.080041] pnp 00:09: [irq 4]
[    0.080150] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.080437] pnp 00:0a: [io  0x02f8-0x02ff]
[    0.080446] pnp 00:0a: [irq 3]
[    0.080552] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.081070] pnp 00:0b: [io  0x0378-0x037f]
[    0.081074] pnp 00:0b: [io  0x0778-0x077b]
[    0.081081] pnp 00:0b: [irq 7]
[    0.081085] pnp 00:0b: [dma 3]
[    0.081225] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.081722] pnp: PnP ACPI: found 12 devices
[    0.081726] ACPI: ACPI bus type pnp unregistered
[    0.081732] PnPBIOS: Disabled by ACPI PNP
[    0.119787] Switching to clocksource acpi_pm
[    0.119826] PCI: max bus depth: 1 pci_try_num: 2
[    0.119852] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[    0.119863] pci 0000:00:01.0:   bridge window [mem 0xcbd00000-0xcfefffff]
[    0.119870] pci 0000:00:01.0:   bridge window [mem 0xaba00000-0xcbbfffff pref]
[    0.119894] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.119898] pci_bus 0000:00: resource 1 [mem 0x00000000-0x3ffffffff]
[    0.119903] pci_bus 0000:01: resource 1 [mem 0xcbd00000-0xcfefffff]
[    0.119907] pci_bus 0000:01: resource 2 [mem 0xaba00000-0xcbbfffff pref]
[    0.120002] NET: Registered protocol family 2
[    0.120002] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.120002] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.120002] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.120512] TCP: Hash tables configured (established 131072 bind 65536)
[    0.120517] TCP reno registered
[    0.120524] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.120558] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.120774] NET: Registered protocol family 1
[    0.280090] pci 0000:01:00.0: Boot video device
[    0.280097] PCI: CLS 32 bytes, default 32
[    0.280225] Unpacking initramfs...
[    0.715644] Freeing initrd memory: 11268k freed
[    0.738290] audit: initializing netlink socket (disabled)
[    0.738319] type=2000 audit(1373818746.735:1): initialized
[    0.757732] highmem bounce pool size: 64 pages
[    0.757743] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.758377] VFS: Disk quotas dquot_6.5.2
[    0.758425] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.758546] msgmni has been set to 1747
[    0.758828] alg: No test for stdrng (krng)
[    0.758877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.758884] io scheduler noop registered
[    0.758887] io scheduler deadline registered
[    0.758899] io scheduler cfq registered (default)
[    0.759080] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.759121] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.759124] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.759553] ERST: Table is not found!
[    0.759557] GHES: HEST is not enabled!
[    0.759577] isapnp: Scanning for PnP cards...
[    1.113240] isapnp: No Plug & Play device found
[    1.113354] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.134051] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.154760] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.175796] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.196542] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.196797] Linux agpgart interface v0.103
[    1.196978] agpgart-sis 0000:00:00.0: SiS chipset [1039/0746]
[    1.207366] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    1.207621] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.208059] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.208075] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.208304] mousedev: PS/2 mouse device common for all mice
[    1.208387] rtc_cmos 00:03: RTC can wake from S4
[    1.208553] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.208586] rtc0: alarms up to one month, 114 bytes nvram
[    1.208607] cpuidle: using governor ladder
[    1.208610] cpuidle: using governor menu
[    1.209003] TCP cubic registered
[    1.209048] NET: Registered protocol family 10
[    1.209877] Mobile IPv6
[    1.209882] NET: Registered protocol family 17
[    1.209889] Registering the dns_resolver key type
[    1.209932] Using IPI No-Shortcut mode
[    1.210100] PM: Hibernation image not present or could not be loaded.
[    1.210133] registered taskstats version 1
[    1.210758] rtc_cmos 00:03: setting system clock to 2013-07-14 16:19:07 UTC (1373818747)
[    1.210835] Initializing network drop monitor service
[    1.211035] Freeing unused kernel memory: 416k freed
[    1.211797] Write protecting the kernel text: 2852k
[    1.211841] Write protecting the kernel read-only data: 1084k
[    1.222114] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.296433] udevd[47]: starting version 175
[    1.398277] sis900.c: v1.08.10 Apr. 2 2006
[    1.399913] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    1.412315] 0000:00:04.0: Using transceiver found at address 1 as default
[    1.423135] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.500966] SCSI subsystem initialized
[    1.516119] usbcore: registered new interface driver usbfs
[    1.516175] usbcore: registered new interface driver hub
[    1.517200] Floppy drive(s): fd0 is 1.44M
[    1.538225] usbcore: registered new device driver usb
[    1.539184] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.554960] FDC 0 is a post-1991 82077
[    1.582106] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.594879] eth0: SiS 900 PCI Fast Ethernet at 0xbc00, IRQ 19, 00:0a:e6:c5:16:2e
[    1.594921] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.595900] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.597204] 8139too 0000:00:0b.0: eth1: RealTek RTL8139 at 0xb800, 00:e0:40:15:02:cb, IRQ 17
[    1.597275] ehci_hcd 0000:00:03.2: EHCI Host Controller
[    1.597339] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[    1.597436] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffef000
[    1.603708] libata version 3.00 loaded.
[    1.608210] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[    1.608302] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.608306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.608311] usb usb1: Product: EHCI Host Controller
[    1.608314] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[    1.608317] usb usb1: SerialNumber: 0000:00:03.2
[    1.608541] hub 1-0:1.0: USB hub found
[    1.608556] hub 1-0:1.0: 6 ports detected
[    1.609133] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    1.609154] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    1.609213] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcffed000
[    1.666085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.666093] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.666098] usb usb2: Product: OHCI Host Controller
[    1.666101] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[    1.666104] usb usb2: SerialNumber: 0000:00:03.0
[    1.667739] hub 2-0:1.0: USB hub found
[    1.667755] hub 2-0:1.0: 3 ports detected
[    1.667910] pata_sis 0000:00:02.5: version 0.5.2
[    1.667966] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[    1.669022] scsi0 : pata_sis
[    1.671970] scsi1 : pata_sis
[    1.672977] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.672983] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.673223] sata_via 0000:00:0d.0: version 2.6
[    1.673392] sata_via 0000:00:0d.0: routed to hard irq line 5
[    1.674752] scsi2 : sata_via
[    1.675112] scsi3 : sata_via
[    1.675296] scsi4 : sata_via
[    1.675385] ata3: SATA max UDMA/133 port i16@0xdc00 bmdma 0xcc00 irq 19
[    1.675390] ata4: SATA max UDMA/133 port i16@0xd800 bmdma 0xcc08 irq 19
[    1.675394] ata5: PATA max UDMA/133 port i16@0xd400 bmdma 0xcc10 irq 19
[    1.675613] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    1.675639] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    1.675697] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcffee000
[    1.730058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.730063] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.730067] usb usb3: Product: OHCI Host Controller
[    1.730070] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[    1.730073] usb usb3: SerialNumber: 0000:00:03.1
[    1.730420] hub 3-0:1.0: USB hub found
[    1.730433] hub 3-0:1.0: 3 ports detected
[    1.756022] Refined TSC clocksource calibration: 1870.908 MHz.
[    1.756033] Switching to clocksource tsc
[    1.920018] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.992047] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    2.000259] ata3.00: ATAPI: Optiarc DVD RW AD-5280S, 1.01, max UDMA/100
[    2.012426] ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100
[    2.012431] ata1.00: 156301488 sectors, multi 16: LBA48
[    2.012665] ata1.01: ATA-6: ST3160023A, 3.71, max UDMA/100
[    2.012669] ata1.01: 312581808 sectors, multi 16: LBA48
[    2.016243] ata3.00: configured for UDMA/100
[    2.028409] ata1.00: configured for UDMA/100
[    2.044418] ata1.01: configured for UDMA/100
[    2.044673] scsi 0:0:0:0: Direct-Access     ATA      ST380011A        3.06 PQ: 0 ANSI: 5
[    2.045200] scsi 0:0:1:0: Direct-Access     ATA      ST3160023A       3.71 PQ: 0 ANSI: 5
[    2.125430] usb 1-1: New USB device found, idVendor=046d, idProduct=0829
[    2.125435] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.125439] usb 1-1: Product: Webcam C110
[    2.125442] usb 1-1: Manufacturer: 
[    2.211953] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-5280S  1.01 PQ: 0 ANSI: 5
[    2.488015] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[    2.542618] ata4: SATA link down (SStatus 0 SControl 310)
[    2.686000] usb 3-2: New USB device found, idVendor=0079, idProduct=0011
[    2.686006] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.686010] usb 3-2: Product: USB Gamepad
[    2.742586] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.742686] sd 0:0:0:0: [sda] Write Protect is off
[    2.742692] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.742733] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.746848] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.746858] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.747685] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.750298] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.750420] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.750546] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.753272]  sda: sda1 sda2 sda3
[    2.753386] sd 0:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.753548] sd 0:0:1:0: [sdb] Write Protect is off
[    2.753553] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.753597] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.774370] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.774421]  sdb: sdb1
[    2.774845] sd 0:0:1:0: [sdb] Attached SCSI disk
[    2.777579] usbcore: registered new interface driver usbhid
[    2.777584] usbhid: USB HID core driver
[    3.449938] device-mapper: uevent: version 1.0.3
[    3.450562] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   11.289340] alg: No test for xts(twofish) (xts(twofish-asm))
[   12.129086] PM: Starting manual resume from disk
[   12.129096] PM: Hibernation image partition 254:1 present
[   12.129099] PM: Looking for hibernation image.
[   12.129797] PM: Image not found (code -22)
[   12.129801] PM: Hibernation image not present or could not be loaded.
[   12.186579] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.402592] udevd[373]: starting version 175
[   13.882401] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   13.882415] ACPI: Power Button [PWRB]
[   13.882562] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[   13.882570] ACPI: Sleep Button [SLPB]
[   13.882672] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   13.882677] ACPI: Power Button [PWRF]
[   13.935148] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.984959] parport_pc 00:0b: reported by Plug and Play ACPI
[   13.985094] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   14.001374] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[   14.001386] ACPI: resource 0000:00:02.1 [io  0x0c00-0x0c1f] conflicts with ACPI region SMRG [io 0xc00-0xc1f]
[   14.001390] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.121940] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   14.309121] Linux media interface: v0.10
[   14.323458] Linux video capture interface: v2.00
[   14.373574] input: USB Gamepad  as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/input/input5
[   14.378275] dragonrise 0003:0079:0011.0001: input,hidraw0: USB HID v1.10 Joystick [USB Gamepad ] on usb-0000:00:03.1-2/input0
[   14.379090] uvcvideo: Found UVC 1.00 device Webcam C110 (046d:0829)
[   14.387713] input: Webcam C110 as /devices/pci0000:00/0000:00:03.2/usb1/1-1/1-1:1.0/input/input6
[   14.388160] usbcore: registered new interface driver uvcvideo
[   14.388164] USB Video Class driver (1.1.1)
[   14.490611] [drm] Initialized drm 1.1.0 20060810
[   14.563258] wmi: Mapper loaded
[   14.599117] usbcore: registered new interface driver snd-usb-audio
[   14.634336] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200b1)
[   14.644094] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[   14.710133] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   14.710138] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[   14.710151] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   14.710158] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.51
[   14.710164] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[   14.710168] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[   14.710695] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[   14.710700] [drm] nouveau 0000:01:00.0: DCB version 3.0
[   14.710706] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00000028
[   14.710711] [drm] nouveau 0000:01:00.0: DCB outp 01: 03000302 00000000
[   14.710715] [drm] nouveau 0000:01:00.0: DCB outp 02: 04011310 00000028
[   14.710719] [drm] nouveau 0000:01:00.0: DCB outp 03: 020223f1 00c0c080
[   14.710723] [drm] nouveau 0000:01:00.0: DCB conn 00: 2030
[   14.710727] [drm] nouveau 0000:01:00.0: DCB conn 01: 0100
[   14.710730] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210
[   14.710734] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211
[   14.710737] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213
[   14.710748] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCDAD
[   14.711033] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD457
[   14.723205] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDB8B
[   14.723232] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD0F
[   14.726380] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF1B
[   14.726765] [TTM] Zone  kernel: Available graphics memory: 447486 kiB
[   14.726769] [TTM] Zone highmem: Available graphics memory: 647138 kiB
[   14.726772] [TTM] Initializing pool allocator
[   14.726784] [TTM] Initializing DMA pool allocator
[   14.726812] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (DDR2)
[   14.727221] agpgart-sis 0000:00:00.0: AGP 3.0 bridge
[   14.727252] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
[   14.727264] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[   14.727270] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[   14.740074] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[   14.740082] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[   14.740289] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[   14.817398] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.817404] [drm] No driver support for vblank timestamp query.
[   14.830629] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[   14.830638] [drm] nouveau 0000:01:00.0: 0: core 400MHz shader 400MHz memory 266MHz voltage 1100mV fanspeed 100%
[   14.830644] [drm] nouveau 0000:01:00.0: c: core 400MHz shader 400MHz memory 265MHz
[   14.839454] [drm] nouveau 0000:01:00.0: 0xC202: Parsing digital output script table
[   14.889950] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[   14.909828] intel8x0_measure_ac97_clock: measured 70399 usecs (3385 samples)
[   14.909832] intel8x0: clocking to 48000
[   15.008742] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo f7009e00
[   15.009108] fbcon: nouveaufb (fb0) is primary device
[   15.026693] Console: switching to colour frame buffer device 128x48
[   15.027615] fb0: nouveaufb frame buffer device
[   15.027618] drm: registered panic notifier
[   15.027641] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   15.531742] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[   15.841264] EXT4-fs (sda1): re-mounted. Opts: (null)
[   16.129838] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.325923] loop: module loaded
[   17.480791] Adding 3903484k swap on /dev/mapper/data-swap.  Priority:-1 extents:1 across:3903484k
[   18.596162] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   18.629801] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   18.735945] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   18.845448] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   21.448681] RPC: Registered named UNIX socket transport module.
[   21.448689] RPC: Registered udp transport module.
[   21.448691] RPC: Registered tcp transport module.
[   21.448694] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   21.477943] FS-Cache: Loaded
[   21.551675] FS-Cache: Netfs 'nfs' registered for caching
[   21.575350] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   25.900599] Bluetooth: Core ver 2.16
[   25.900646] NET: Registered protocol family 31
[   25.900649] Bluetooth: HCI device and connection manager initialized
[   25.900656] Bluetooth: HCI socket layer initialized
[   25.900660] Bluetooth: L2CAP socket layer initialized
[   25.900930] Bluetooth: SCO socket layer initialized
[   25.939228] Bluetooth: RFCOMM TTY layer initialized
[   25.939241] Bluetooth: RFCOMM socket layer initialized
[   25.939244] Bluetooth: RFCOMM ver 1.11
[   25.962363] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.962370] Bluetooth: BNEP filters: protocol multicast
[   26.092476] lp0: using parport0 (interrupt-driven).
[   26.125795] ppdev: user-space parallel port driver
[   34.755535] 8139too 0000:00:0b.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[   36.717222] eth0: Media Link On 100mbps full-duplex
[   45.560051] eth1: no IPv6 routers present
[   45.848017] eth0: no IPv6 routers present
[   46.158893] postgres (2986): /proc/2986/oom_adj is deprecated, please use /proc/2986/oom_score_adj instead.
[  529.694772] 8139too 0000:00:0b.0: eth1: link down
[  532.986732] 8139too 0000:00:0b.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[  539.787964] 8139too 0000:00:0b.0: eth1: link down
[  541.847261] 8139too 0000:00:0b.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[  546.199003] 8139too 0000:00:0b.0: eth1: link down
[  547.876621] 8139too 0000:00:0b.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 3594.849520] 8139too 0000:00:0b.0: eth1: link down
[ 3995.041296] 8139too 0000:00:0b.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 4421.424055] eth1: no IPv6 routers present
[ 4444.696059] eth1: no IPv6 routers present
[ 4494.048057] eth1: no IPv6 routers present

Я в логах еще не очень силен...
« Последнее редактирование: 14 Июля 2013, 21:53:49 от Krishnoved »
 

Оффлайн qupl

Re: Не стартует DHCP
« Ответ #3 : 14 Июля 2013, 22:00:41 »
Тут чисто всё.

Сообщение объединено: 14 Июля 2013, 22:15:36
cat /etc/network/interfaces
« Последнее редактирование: 14 Июля 2013, 22:15:36 от qupl »
 

Оффлайн ihammers

Re: Не стартует DHCP
« Ответ #4 : 14 Июля 2013, 22:33:38 »
Попробуйте запустить и выложить последние строчки из лога:
~$ sudo service isc-dhcp-server restart
~$ cat /var/log/daemon.log
Там должны быть сообщения почему не хочет запускаться.
Debian GNU/Linux Stretch, kernel 4.9.0-5-amd64,
LXQt/KDE/OpenBox AMD Phenon X4 / 16Gb RAM / ATI HD7750 Silent
_______________________________
Debian GNU/Linux Stretch, kernel 4.9.0-5-amd64, LXQt/KDE/OpenBox
Acer Aspire One 722 AMD C60 / 4Gb RAM / ATI HD6290
 

Оффлайн Krishnoved

Re: Не стартует DHCP
« Ответ #5 : 14 Июля 2013, 23:00:19 »
Тут чисто всё.

Сообщение объединено: 14 Июля 2013, 22:15:36
cat /etc/network/interfaces

$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface

Фантастика.... после выполнения этой команды все запустилось. В чем тут хитрость?


Сообщение объединено: 14 Июля 2013, 23:11:42
И да. После перезагрузки DHCP службу приходится запускать вручную. Возможно ли автоматизировать?
« Последнее редактирование: 14 Июля 2013, 23:11:42 от Krishnoved »
 

Оффлайн apollyon

Re: Не стартует DHCP
« Ответ #6 : 14 Июля 2013, 23:20:20 »
Если всё нормально настроено, то должен запускаться автоматически после перезагрузки.
Проверьте, есть ли ссылки
ls -l /etc/rc[0-6]*/*isc*Если нет:
update-rc.d /etc/init.d/isc-dhcp-server defaultsА вообще хотелось бы глянуть на вывод dhcp-сервера после загрузки системы (из /var/log/syslog)
 

Оффлайн Krishnoved

Re: Не стартует DHCP
« Ответ #7 : 14 Июля 2013, 23:31:51 »
Если всё нормально настроено, то должен запускаться автоматически после перезагрузки.
Проверьте, есть ли ссылки
ls -l /etc/rc[0-6]*/*isc*Если нет:
update-rc.d /etc/init.d/isc-dhcp-server defaultsА вообще хотелось бы глянуть на вывод dhcp-сервера после загрузки системы (из /var/log/syslog)

~$ ls -l /etc/rc[0-6]*/*isc*
lrwxrwxrwx 1 root root 25 Июл 14 13:57 /etc/rc0.d/K01isc-dhcp-server -> ../init.d/isc-dhcp-server
lrwxrwxrwx 1 root root 25 Июл 14 13:57 /etc/rc1.d/K01isc-dhcp-server -> ../init.d/isc-dhcp-server
lrwxrwxrwx 1 root root 25 Июл 14 13:57 /etc/rc2.d/S04isc-dhcp-server -> ../init.d/isc-dhcp-server
lrwxrwxrwx 1 root root 25 Июл 14 13:57 /etc/rc3.d/S04isc-dhcp-server -> ../init.d/isc-dhcp-server
lrwxrwxrwx 1 root root 25 Июл 14 13:57 /etc/rc4.d/S04isc-dhcp-server -> ../init.d/isc-dhcp-server
lrwxrwxrwx 1 root root 25 Июл 14 13:57 /etc/rc5.d/S04isc-dhcp-server -> ../init.d/isc-dhcp-server
lrwxrwxrwx 1 root root 25 Июл 14 13:57 /etc/rc6.d/K01isc-dhcp-server -> ../init.d/isc-dhcp-server

~$ sudo update-rc.d /etc/init.d/isc-dhcp-server defaults
update-rc.d: using dependency based boot sequencing
update-rc.d: error: unable to read /etc/init.d//etc/init.d/isc-dhcp-server
 

Оффлайн apollyon

Re: Не стартует DHCP
« Ответ #8 : 14 Июля 2013, 23:37:11 »
Пардон, мой провтык, должно быть
update-rc.d isc-dhcp-server defaultsНо ссылки на скрипт у Вас есть, потому
Цитировать
хотелось бы глянуть на вывод dhcp-сервера после загрузки системы (из /var/log/syslog)
 

Оффлайн Krishnoved

Re: Не стартует DHCP
« Ответ #9 : 14 Июля 2013, 23:39:35 »
update-rc.d isc-dhcp-server defaults

~$ sudo update-rc.d isc-dhcp-server defaults
update-rc.d: using dependency based boot sequencing

Пока автоматический не запускается...
« Последнее редактирование: 15 Июля 2013, 00:00:34 от Krishnoved »
 

Оффлайн apollyon

Re: Не стартует DHCP
« Ответ #10 : 14 Июля 2013, 23:58:10 »
Если я правильно понял, но в 23:15 была последняя перезагрузка компьютера. И согласно логу, сначала запустился демон dhcpd, который ругнулся
Jul 14 23:15:53 syshome dhcpd: No subnet declaration for eth1 (no IPv4 addresses).
Jul 14 23:15:53 syshome dhcpd: ** Ignoring requests on eth1.  If this is not what
Jul 14 23:15:53 syshome dhcpd:    you want, please write a subnet declaration
Jul 14 23:15:53 syshome dhcpd:    in your dhcpd.conf file for the network segment
Jul 14 23:15:53 syshome dhcpd:    to which interface eth1 is attached. **
Jul 14 23:15:53 syshome dhcpd:
Jul 14 23:15:53 syshome dhcpd:
Jul 14 23:15:53 syshome dhcpd: Not configured to listen on any interfaces!
После чего запустился NetworkManager, который поднял интерфейс eth1 и присвоил ему IP-адрес. После этого ещё был перезапуск демона dhcpd, и именно после этого перезапуска всё заработало.
Возможные решения проблемы:
1) переделать ссылки на скрипт запуска dhcpd, выставить его запуск после запуска NetworkManager
2) вынести конфигурацию интерфейса eth1 из NetworkManager в /etc/network/interfaces
Решение за Вами.

Сообщение объединено: 15 Июля 2013, 00:24:36
Если менять порядок запуска инит-скриптов, то нужно будет сделать следующее:
update-rc.d -f isc-dhcp-server remove
update-rc.d isc-dhcp-server start 20 2 3 4 5 . stop 02 0 1 6 .
(писал по примеру своей машины, у меня NetworkManager стартует под номером 18, если что - поменять под себя)

В случае вынесения конфига eth1 в /etc/network/interfaces нужно будет добавить:
auto eth1
iface eth1 inet static
        address IP-ADDRESS
        netmask NETMASK

Скорее всего нужно будет удалить интерфейс из настроек NetworkManager, поскольку вместе они не дружат. Точнее сказать не могу, крайне редко пользовался манагером, больше привык interfaces вручную править.

Сообщение объединено: 15 Июля 2013, 00:26:07
хм, вроде ж новое сообщение добавлял  ???
« Последнее редактирование: 15 Июля 2013, 00:26:07 от apollyon »
 

Оффлайн Krishnoved

Re: Не стартует DHCP
« Ответ #11 : 15 Июля 2013, 00:30:46 »
Если я правильно понял, но в 23:15 была последняя перезагрузка компьютера. И согласно логу, сначала запустился демон dhcpd, который ругнулся
Jul 14 23:15:53 syshome dhcpd: No subnet declaration for eth1 (no IPv4 addresses).
Jul 14 23:15:53 syshome dhcpd: ** Ignoring requests on eth1.  If this is not what
Jul 14 23:15:53 syshome dhcpd:    you want, please write a subnet declaration
Jul 14 23:15:53 syshome dhcpd:    in your dhcpd.conf file for the network segment
Jul 14 23:15:53 syshome dhcpd:    to which interface eth1 is attached. **
Jul 14 23:15:53 syshome dhcpd:
Jul 14 23:15:53 syshome dhcpd:
Jul 14 23:15:53 syshome dhcpd: Not configured to listen on any interfaces!
После чего запустился NetworkManager, который поднял интерфейс eth1 и присвоил ему IP-адрес. После этого ещё был перезапуск демона dhcpd, и именно после этого перезапуска всё заработало.
Возможные решения проблемы:
1) переделать ссылки на скрипт запуска dhcpd, выставить его запуск после запуска NetworkManager
2) вынести конфигурацию интерфейса eth1 из NetworkManager в /etc/network/interfaces
Решение за Вами.

Сообщение объединено: 15 Июля 2013, 00:24:36
Если менять порядок запуска инит-скриптов, то нужно будет сделать следующее:
update-rc.d -f isc-dhcp-server remove
update-rc.d isc-dhcp-server start 20 2 3 4 5 . stop 02 0 1 6 .
(писал по примеру своей машины, у меня NetworkManager стартует под номером 18, если что - поменять под себя)

В случае вынесения конфига eth1 в /etc/network/interfaces нужно будет добавить:
auto eth1
iface eth1 inet static
        address IP-ADDRESS
        netmask NETMASK

Скорее всего нужно будет удалить интерфейс из настроек NetworkManager, поскольку вместе они не дружат. Точнее сказать не могу, крайне редко пользовался манагером, больше привык interfaces вручную править.

Сообщение объединено: 15 Июля 2013, 00:26:07
хм, вроде ж новое сообщение добавлял  ???

Не знал, что возможно менять порядок запуска.  ;D На будущее буду знать, спасибо.

Я пошел 2-ым путем, наиболее простым на данный момент. Правда 4-мя строками не обошлось, но все теперь запускается в автоматическом режиме. Весьма благодарю)
 

Оффлайн apollyon

Re: Не стартует DHCP
« Ответ #12 : 15 Июля 2013, 00:35:44 »
на то это и линукс, что менять можно всё))
 

Оффлайн qupl

Re: Не стартует DHCP
« Ответ #13 : 15 Июля 2013, 06:34:29 »
Фантастика.... после выполнения этой команды все запустилось. В чем тут хитрость?
Это просто совпадение, хотел посмотреть какие интерфейсы у Вас настроены.
Если вопрос решен, то измените заголовок первого поста, добавьте [Решено].

Теги:
     

    crontab на сервере hetzner [решено]

    Автор zCirill

    Ответов: 2
    Просмотров: 2676
    Последний ответ 05 Апреля 2013, 12:53:26
    от zCirill
    [РЕШЕНО] разваливается mdadm рэйд при каждой перезагрузке :(

    Автор PbI6A

    Ответов: 3
    Просмотров: 4982
    Последний ответ 04 Октября 2018, 08:54:47
    от PbI6A
    Samba, Winbind, Webmin(?) [решено]

    Автор onegai

    Ответов: 0
    Просмотров: 1562
    Последний ответ 09 Июля 2018, 05:21:09
    от onegai
    [Решено] Не отображаются картинки на сайте и не работают некоторые скрипты.

    Автор moskov199

    Ответов: 0
    Просмотров: 1884
    Последний ответ 26 Июля 2013, 22:22:12
    от moskov199
    [РЕШЕНО] openvpn на debian 10 нет соединения с интернет на клиенте

    Автор Asternix

    Ответов: 2
    Просмотров: 1634
    Последний ответ 11 Февраля 2020, 11:45:57
    от Asternix