Автор Тема: [Решено] Не могу попасть в консоль  (Прочитано 2874 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн Сергей

[Решено] Не могу попасть в консоль
« : 03 Августа 2013, 19:50:53 »
Установил debian 7 cd1 только системные утилиты.
При загрузки после груба несколько строк и цветные разводы.

Перед этим ставил debian 7 lxde. Тоже  самое но после  цветных разводов запускались иксы.
Несколько помучив grub и initramfs вместо разводов появился текст, но uvesafb в логах сообщал
о какой то ошибке. Впрочем на работу системы это ни как не влияло.

В Ubuntu такой проблемы не наблюдалось.

Не могу попасть в консоль. На этом диске стоит ещё Lubuntu 12.04. Из неё редактировал /etc/default/grub
Через chroot обновлял. Что то ещё делал, но без успешно.

Хотел собрать лёгкую систему без лишнего мусора.
В какую сторону копать?
« Последнее редактирование: 07 Августа 2013, 05:09:48 от qupl »
 

Оффлайн qupl

Re: Не могу попасть в консоль
« Ответ #1 : 03 Августа 2013, 19:58:33 »
Какая видеокарта? На вторую консоль переключаться не пробовали? Логи смотрели?

Оффлайн Сергей

Re: Не могу попасть в консоль
« Ответ #2 : 04 Августа 2013, 10:43:48 »
s@Lubuntu:~$ lspci | grep VGA
00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video

Нетбук Cameron nb 1060.
У монитора обрезанное разрешение экрана 1024x600. Лишь в некоторых дистрибутивах подхватывалось из коробки. А так приходилось xorg.conf писать.

Что значит вторая консоль? И как на неё переключаться?

dmesg смотрел. Не чего, за что можно было бы зацепиться, не увидел.

dmesg
Spoiler: ShowHide
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.46-1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001e7b0000 (usable)
[    0.000000]  BIOS-e820: 000000001e7b0000 - 000000001e7bffc0 (ACPI data)
[    0.000000]  BIOS-e820: 000000001e7bffc0 - 000000001e7c0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000080400000 - 0000000080440004 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: WIPRO Limited         /TR2350, BIOS 4.00.01 Rev. 1.00.003  Built: 08/18/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1e7b0 max_arch_pfn = 0x100000
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[    0.000000] init_memory_mapping: 0000000000000000-000000001e7b0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001e400000 page 2M
[    0.000000]  001e400000 - 001e7b0000 page 4k
[    0.000000] kernel direct mapping tables up to 1e7b0000 @ 17f8000-1800000
[    0.000000] RAMDISK: 1d23f000 - 1db8c000
[    0.000000] ACPI: RSDP 000e9010 00014 (v00 OID_00)
[    0.000000] ACPI: RSDT 1e7b2220 00030 (v01 AMD    RSDT_000 31303030 AMD  31303030)
[    0.000000] ACPI: FACP 1e7b2120 00084 (v01 AMD    FACP_000 31303030 AMD  31303030)
[    0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 (20110623/tbfadt-610)
[    0.000000] ACPI: DSDT 1e7b0000 02112 (v01 INSYDE CS553x   00001007 INTL 20030122)
[    0.000000] ACPI: FACS 1e7bffc0 00040
[    0.000000] ACPI: BOOT 1e7b21b0 00028 (v01 AMD    BOOT_000 31303030 AMD  31303030)
[    0.000000] ACPI: DBGP 1e7b21e0 00034 (v01 AMD    DBGP_000 31303030 AMD  31303030)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 487MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1e7b0000
[    0.000000]   low ram: 0 - 1e7b0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001e7b0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001e7b0
[    0.000000] On node 0 totalpages: 124735
[    0.000000] free_area_init_node: node 0, pgdat c13c5a38, node_mem_map de3df200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 944 pages used for memmap
[    0.000000]   Normal zone: 119808 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x9c10
[    0.000000] No local APIC present or hardware disabled
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80440004 (gap: 80440004:6fbbfffc)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:
  • 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 123759
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486 root=UUID=460cb882-044b-4cc2-8df8-f9a7639fddbf ro quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 480184k/499392k available (2596k kernel code, 18756k reserved, 1293k data, 452k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa1000 - 0xfffff000   ( 376 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xdefb0000 - 0xff7fe000   ( 520 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde7b0000   ( 487 MB)
[    0.000000]       .init : 0xc13cd000 - 0xc143e000   ( 452 kB)
[    0.000000]       .data : 0xc128902c - 0xc13cc680   (1293 kB)
[    0.000000]       .text : 0xc1000000 - 0xc128902c   (2596 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=ddc06000 soft=ddc08000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 498.137 MHz processor.
[    0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.27 BogoMIPS (lpj=1992548)
[    0.008039] pid_max: default: 32768 minimum: 301
[    0.008259] Security Framework initialized
[    0.008287] AppArmor: AppArmor disabled by boot time parameter
[    0.008364] Mount-cache hash table entries: 512
[    0.008778] Initializing cgroup subsys cpuacct
[    0.008800] Initializing cgroup subsys memory
[    0.008839] Initializing cgroup subsys devices
[    0.008856] Initializing cgroup subsys freezer
[    0.008871] Initializing cgroup subsys net_cls
[    0.008887] Initializing cgroup subsys blkio
[    0.008921] Initializing cgroup subsys perf_event
[    0.009052] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
[    0.012411] ACPI: Core revision 20110623
[    0.019835] ACPI: setting ELCR to 0200 (from 0ca0)
[    0.024294] Performance Events: no PMU driver, software events only.
[    0.024683] NMI watchdog disabled (cpu0): hardware events not enabled
[    0.025242] devtmpfs: initialized
[    0.025860] PM: Registering ACPI NVS region at 1e7bffc0 (64 bytes)
[    0.028229] print_constraints: dummy:
[    0.028484] NET: Registered protocol family 16
[    0.029070] EISA bus registered
[    0.029261] ACPI: bus type pci registered
[    0.031444] PCI: PCI BIOS revision 2.10 entry at 0xff8b7, last bus=1
[    0.031461] PCI: Using configuration type 1 for base access
[    0.036152] bio: create slab <bio-0> at 0
[    0.036512] ACPI: Added _OSI(Module Device)
[    0.036529] ACPI: Added _OSI(Processor Device)
[    0.036546] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.036564] ACPI: Added _OSI(Processor Aggregator Device)
[    0.043162] ACPI: EC: Look up EC in DSDT
[    0.054604] ACPI: Interpreter enabled
[    0.054646] ACPI: (supports S0 S1 S3 S5)
[    0.054760] ACPI: BIOS offers _GTS
[    0.054773] ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
[    0.054795] ACPI: BIOS offers _BFS
[    0.054808] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
[    0.054827] ACPI: Using PIC for interrupt routing
[    0.308246] ACPI: No dock devices found.
[    0.308263] HEST: Table not found.
[    0.308291] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.308729] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.309710] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.309735] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xac17] (ignored)
[    0.309759] pci_root PNP0A03:00: host bridge window [io  0xac20-0xffff] (ignored)
[    0.309784] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.309809] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[    0.309834] pci_root PNP0A03:00: host bridge window [mem 0x1e7c0000-0x403fffff] (ignored)
[    0.309859] pci_root PNP0A03:00: host bridge window [mem 0x40500000-0xefffffff] (ignored)
[    0.310012] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600
[    0.310160] pci 0000:00:01.0: reg 10: [io  0xac1c-0xac1f]
[    0.310274] pci 0000:00:01.0: reg 14: [io  0x9e00-0x9e07]
[    0.311088] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300
[    0.311388] pci 0000:00:01.1: reg 10: [mem 0x90000000-0x91ffffff]
[    0.311604] pci 0000:00:01.1: reg 14: [mem 0x8fffc000-0x8fffffff]
[    0.311821] pci 0000:00:01.1: reg 18: [mem 0x8fff8000-0x8fffbfff]
[    0.312041] pci 0000:00:01.1: reg 1c: [mem 0x8fff4000-0x8fff7fff]
[    0.312259] pci 0000:00:01.1: reg 20: [mem 0x8fff0000-0x8fff3fff]
[    0.312994] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010
[    0.313251] pci 0000:00:01.2: reg 10: [mem 0xefe00000-0xefe03fff]
[    0.314602] pci 0000:00:0d.0: [10ec:8139] type 0 class 0x000200
[    0.314641] pci 0000:00:0d.0: reg 10: [io  0xdf00-0xdfff]
[    0.314671] pci 0000:00:0d.0: reg 14: [mem 0xefd00000-0xefd000ff]
[    0.314765] pci 0000:00:0d.0: supports D1 D2
[    0.314784] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
[    0.314842] pci 0000:00:0e.0: [104c:ac56] type 2 class 0x000607
[    0.314883] pci 0000:00:0e.0: reg 10: [mem 0xefc00000-0xefc00fff]
[    0.314935] pci 0000:00:0e.0: supports D1 D2
[    0.314954] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.315103] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601
[    0.315420] pci 0000:00:0f.0: reg 10: [io  0x6000-0x6007]
[    0.315687] pci 0000:00:0f.0: reg 14: [io  0x6100-0x61ff]
[    0.315953] pci 0000:00:0f.0: reg 18: [io  0x6200-0x623f]
[    0.316257] pci 0000:00:0f.0: reg 1c: [io  0x0000-0x001f]
[    0.316529] pci 0000:00:0f.0: reg 20: [io  0x9d00-0x9d7f]
[    0.316811] pci 0000:00:0f.0: reg 24: [io  0x9c00-0x9c3f]
[    0.317407] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101
[    0.318375] pci 0000:00:0f.2: reg 20: [io  0xeff0-0xefff]
[    0.319077] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401
[    0.319350] pci 0000:00:0f.3: reg 10: [io  0xdc80-0xdcff]
[    0.320797] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03
[    0.321204] pci 0000:00:0f.4: reg 10: [mem 0xeff00000-0xeff00fff]
[    0.322817] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[    0.323167] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03
[    0.323526] pci 0000:00:0f.5: reg 10: [mem 0xef900000-0xef900fff]
[    0.325131] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[    0.325426] pci_bus 0000:00: on NUMA node 0
[    0.325448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.326155]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.335701] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.337589] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.339454] ACPI: PCI Interrupt Link [LNKC] (IRQs *7)
[    0.341367] ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
[    0.342846] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[    0.342887] vgaarb: loaded
[    0.342899] vgaarb: bridge control possible 0000:00:01.1
[    0.343215] PCI: Using ACPI for IRQ routing
[    0.343234] PCI: pci_cache_line_size set to 32 bytes
[    0.343736] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.343757] reserve RAM buffer: 000000001e7b0000 - 000000001fffffff
[    0.344479] Switching to clocksource pit
[    0.351762] pnp: PnP ACPI init
[    0.351862] ACPI: bus type pnp registered
[    0.471453] pnp 00:00: [bus 00-ff]
[    0.471474] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.471494] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.471514] pnp 00:00: [io  0x0d00-0xac17 window]
[    0.471578] pnp 00:00: [io  0xac20-0xffff window]
[    0.471600] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.471622] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    0.471643] pnp 00:00: [mem 0x1e7c0000-0x403fffff window]
[    0.471665] pnp 00:00: [mem 0x40500000-0xefffffff window]
[    0.471890] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.472043] pnp 00:01: [irq 8]
[    0.472062] pnp 00:01: [io  0x0070-0x0073]
[    0.472242] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.472371] pnp 00:02: [io  0x0061]
[    0.472563] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.472846] pnp 00:03: [mem 0x00000000-0x0009ffff]
[    0.472877] pnp 00:03: [mem 0x000e0000-0x000fffff]
[    0.472897] pnp 00:03: [mem 0x00100000-0x1e7affff]
[    0.472917] pnp 00:03: [mem 0x40400000-0x4041ffff]
[    0.472937] pnp 00:03: [mem 0xf0000000-0xffffffff]
[    0.472956] pnp 00:03: [io  0x0092]
[    0.473237] system 00:03: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.473265] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.473292] system 00:03: [mem 0x00100000-0x1e7affff] could not be reserved
[    0.473318] system 00:03: [mem 0x40400000-0x4041ffff] has been reserved
[    0.473344] system 00:03: [mem 0xf0000000-0xffffffff] has been reserved
[    0.473371] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.473508] pnp 00:04: [dma 4]
[    0.473527] pnp 00:04: [io  0x0000-0x000f]
[    0.473545] pnp 00:04: [io  0x0080-0x008f]
[    0.473564] pnp 00:04: [io  0x00c0-0x00df]
[    0.473583] pnp 00:04: [io  0x0480-0x048f]
[    0.473778] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.473879] pnp 00:05: [io  0x00f0-0x00ff]
[    0.473899] pnp 00:05: [irq 13]
[    0.474092] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.475418] pnp 00:06: [io  0x002e-0x002f]
[    0.475732] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.476294] pnp 00:07: [irq 1]
[    0.476312] pnp 00:07: [io  0x0060]
[    0.476330] pnp 00:07: [io  0x0064]
[    0.476541] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.477088] pnp 00:08: [irq 12]
[    0.477284] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.477758] pnp: PnP ACPI: found 9 devices
[    0.477773] ACPI: ACPI bus type pnp unregistered
[    0.477793] PnPBIOS: Disabled by ACPI PNP
[    0.525361] Switching to clocksource acpi_pm
[    0.525430] PCI: max bus depth: 1 pci_try_num: 2
[    0.525498] pci 0000:00:0f.0: BAR 3: assigned [io  0x1000-0x101f]
[    0.525599] pci 0000:00:0e.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[    0.525630] pci 0000:00:0e.0: BAR 15: assigned [mem 0x88000000-0x8bffffff pref]
[    0.525661] pci 0000:00:0e.0: BAR 14: assigned [io  0x1400-0x14ff]
[    0.525690] pci 0000:00:0e.0: BAR 13: assigned [io  0x1800-0x18ff]
[    0.525714] pci 0000:00:0e.0: CardBus bridge to [bus 01-04]
[    0.525734] pci 0000:00:0e.0:   bridge window [io  0x1800-0x18ff]
[    0.525758] pci 0000:00:0e.0:   bridge window [io  0x1400-0x14ff]
[    0.525783] pci 0000:00:0e.0:   bridge window [mem 0x88000000-0x8bffffff pref]
[    0.525808] pci 0000:00:0e.0:   bridge window [mem 0x84000000-0x87ffffff]
[    0.528714] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
[    0.528732] PCI: setting IRQ 7 as level-triggered
[    0.528761] pci 0000:00:0e.0: setting latency timer to 64
[    0.528786] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.528808] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.528831] pci_bus 0000:01: resource 0 [io  0x1800-0x18ff]
[    0.528853] pci_bus 0000:01: resource 1 [io  0x1400-0x14ff]
[    0.528875] pci_bus 0000:01: resource 2 [mem 0x88000000-0x8bffffff pref]
[    0.528899] pci_bus 0000:01: resource 3 [mem 0x84000000-0x87ffffff]
[    0.529132] NET: Registered protocol family 2
[    0.529441] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.530639] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.531061] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.531312] TCP: Hash tables configured (established 16384 bind 16384)
[    0.531329] TCP reno registered
[    0.531347] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.531381] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.531667] NET: Registered protocol family 1
[    0.531793] pci 0000:00:01.1: Boot video device
[    0.534797] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.534815] PCI: setting IRQ 10 as level-triggered
[    0.604407] PCI: CLS 32 bytes, default 32
[    0.604679] Unpacking initramfs...
[    2.454636] Freeing initrd memory: 9524k freed
[    2.464114] Simple Boot Flag at 0x3f set to 0x1
[    2.466508] audit: initializing netlink socket (disabled)
[    2.466561] type=2000 audit(1375540359.461:1): initialized
[    2.577694] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.578249] VFS: Disk quotas dquot_6.5.2
[    2.578382] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.578642] msgmni has been set to 956
[    2.579447] alg: No test for stdrng (krng)
[    2.579570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.579591] io scheduler noop registered
[    2.579606] io scheduler deadline registered
[    2.579661] io scheduler cfq registered (default)
[    2.580285] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.580443] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.580461] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.581583] ERST: Table is not found!
[    2.581597] GHES: HEST is not enabled!
[    2.581680] isapnp: Scanning for PnP cards...
[    2.937405] isapnp: No Plug & Play device found
[    2.937713] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.940153] Linux agpgart interface v0.103
[    2.941476] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.974706] i8042: Detected active multiplexing controller, rev 1.1
[    2.991541] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.991576] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.991795] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.991992] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.992237] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.993025] mousedev: PS/2 mouse device common for all mice
[    2.994691] rtc_cmos 00:01: RTC can wake from S4
[    2.995081] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.995135] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    2.995417] EISA: Probing bus 0 at eisa.0
[    2.995447] Cannot allocate resource for EISA slot 1
[    2.995511] Cannot allocate resource for EISA slot 6
[    2.995551] EISA: Detected 0 cards.
[    2.995566] cpuidle: using governor ladder
[    2.995581] cpuidle: using governor menu
[    2.997314] TCP cubic registered
[    2.997461] NET: Registered protocol family 10
[    3.001159] Mobile IPv6
[    3.001176] NET: Registered protocol family 17
[    3.001202] Registering the dns_resolver key type
[    3.001255] Using IPI Shortcut mode
[    3.001843] PM: Hibernation image not present or could not be loaded.
[    3.001895] registered taskstats version 1
[    3.003010] rtc_cmos 00:01: setting system clock to 2013-08-03 14:32:40 UTC (1375540360)
[    3.003310] Initializing network drop monitor service
[    3.003880] Freeing unused kernel memory: 452k freed
[    3.004760] Write protecting the kernel text: 2600k
[    3.004922] Write protecting the kernel read-only data: 1028k
[    3.038565] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.084613] udevd[42]: starting version 175
[    3.292950] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    3.293032] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    3.295654] 8139too: 8139too Fast Ethernet driver 0.9.28
[    3.357832] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[    3.357854] PCI: setting IRQ 5 as level-triggered
[    3.453638] 8139too 0000:00:0d.0: eth0: RealTek RTL8139 at 0xdf00, 00:1a:13:b2:04:b3, IRQ 5
[    3.576338] Refined TSC clocksource calibration: 498.050 MHz.
[    3.576368] Switching to clocksource tsc
[    3.613971] SCSI subsystem initialized
[    3.627045] usbcore: registered new interface driver usbfs
[    3.627179] usbcore: registered new interface driver hub
[    3.640463] usbcore: registered new device driver usb
[    3.643319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.643599] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[    3.643643] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[    3.643734] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[    3.680749] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xef900000
[    3.699411] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[    3.699540] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.699564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.699585] usb usb1: Product: EHCI Host Controller
[    3.699603] usb usb1: Manufacturer: Linux 3.2.0-4-486 ehci_hcd
[    3.699622] usb usb1: SerialNumber: 0000:00:0f.5
[    3.703177] libata version 3.00 loaded.
[    3.708746] hub 1-0:1.0: USB hub found
[    3.708781] hub 1-0:1.0: 4 ports detected
[    3.710437] pata_amd 0000:00:0f.2: version 0.4.1
[    3.722286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.722373] scsi0 : pata_amd
[    3.728691] scsi1 : pata_amd
[    3.729713] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq 14
[    3.729738] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq 15
[    3.730239] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[    3.730284] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[    3.730347] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[    3.730421] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xeff00000
[    3.801582] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.801609] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.801630] usb usb2: Product: OHCI Host Controller
[    3.801648] usb usb2: Manufacturer: Linux 3.2.0-4-486 ohci_hcd
[    3.801667] usb usb2: SerialNumber: 0000:00:0f.4
[    3.802456] hub 2-0:1.0: USB hub found
[    3.802490] hub 2-0:1.0: 4 ports detected
[    3.900667] ata1.00: ATA-7: FUJITSU MHW2060AT, 0000000B, max UDMA/100
[    3.900695] ata1.00: 117210240 sectors, multi 16: LBA
[    3.916462] ata1.00: configured for UDMA/100
[    3.916937] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2060A 0000 PQ: 0 ANSI: 5
[    3.918646] ata2: port disabled--ignoring
[    3.962322] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    3.962626] sd 0:0:0:0: [sda] Write Protect is off
[    3.962650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.962784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.064258]  sda: sda1 sda2 sda3 sda4
[    4.067124] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.078316] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.957082] PM: Starting manual resume from disk
[    4.957106] PM: Hibernation image partition 8:4 present
[    4.957121] PM: Looking for hibernation image.
[    4.978419] PM: Image not found (code -22)
[    4.978434] PM: Hibernation image not present or could not be loaded.
[    5.132406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    7.832254] udevd[278]: starting version 175
[    8.563275] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    8.679739] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    8.781483] ACPI: resource (null) [io  0x6100-0x61ff] conflicts with ACPI region GPIO [io 0x6100-0x61ff]
[    8.781508] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.781634] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
[    8.781748] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
[    8.815160] AMD Geode RNG detected
[    9.158615] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    9.158637] PCI: setting IRQ 11 as level-triggered
[    9.176952] ACPI: Lid Switch [LID]
[    9.188240] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    9.188936] ACPI: Power Button [PWRF]
[    9.209791] lxfb 0000:00:01.1: 24576 KB of video memory at 0x90000000
[    9.280658] fbcon: Geode LX (fb0) is primary device
[    9.293375] Console: switching to colour frame buffer device 80x30
[    9.302663] fb0: Geode LX frame buffer device
[    9.485788] psmouse serio3: hgpk: ID: 10 00 64
[   10.377823] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input4
[   10.975719] ACPI: Battery Slot [BATT] (battery present)
[   11.067201] yenta_cardbus 0000:00:0e.0: CardBus bridge found [104c:ac56]
[   11.067242] yenta_cardbus 0000:00:0e.0: Enabling burst memory read transactions
[   11.067267] yenta_cardbus 0000:00:0e.0: Using CSCINT to route CSC interrupts to PCI
[   11.067288] yenta_cardbus 0000:00:0e.0: Routing CardBus interrupts to PCI
[   11.067313] yenta_cardbus 0000:00:0e.0: TI: mfunc 0x00001002, devctl 0x60
[   11.255637] ACPI: AC Adapter [AC] (on-line)
[   11.269394] Error: Driver 'pcspkr' is already registered, aborting...
[   11.296651] yenta_cardbus 0000:00:0e.0: ISA IRQ mask 0x0000, PCI irq 7
[   11.296676] yenta_cardbus 0000:00:0e.0: Socket status: 30000007
[   11.476658] geode-aes: GEODE AES engine enabled.
[   11.477651] snd_cs5535audio 0000:00:0f.3: setting latency timer to 64
[   11.772188] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   11.775094] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x480-0x48f 0x4d0-0x4d7
[   11.780395] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   11.781440] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   11.782594] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[   11.782764] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   11.782941] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[   11.783107] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   14.401060] Adding 742396k swap on /dev/sda4.  Priority:-1 extents:1 across:742396k
[   14.476430] EXT4-fs (sda2): re-mounted. Opts: (null)
[   15.118716] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   15.367627] loop: module loaded
[   20.485010] RPC: Registered named UNIX socket transport module.
[   20.485033] RPC: Registered udp transport module.
[   20.485048] RPC: Registered tcp transport module.
[   20.485063] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   20.585581] FS-Cache: Loaded
[   20.742812] FS-Cache: Netfs 'nfs' registered for caching
[   20.819622] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).



 

Оффлайн qupl

Re: Не могу попасть в консоль
« Ответ #3 : 04 Августа 2013, 11:32:45 »
Что значит вторая консоль? И как на неё переключаться?
Ctrl+Alt+F2

Я правильно понял, что Х-ов нет и загрузка прерывается не дойдя до логина пользователя?

Оффлайн Сергей

Re: Не могу попасть в консоль
« Ответ #4 : 04 Августа 2013, 13:05:26 »
Да, загрузка прерывается до логина. Всего 6 или 7 строк.
 

Оффлайн vladimir_ar

Re: Не могу попасть в консоль
« Ответ #5 : 04 Августа 2013, 13:08:10 »
в конфиге груба в строке запуска ядра добавить radeon.modeset=0
Debian Testing, kernel 3.16-2-amd64, OpenBox
AMD A8-3750 / 16Gb RAM / ATI HD6550D (onboard) / Sound ASUS Xonar - DS
_______________________________
Debian Testing, kernel 3.14-2-amd64, OpenBox
HP-655 AMD E1 / 8Gb RAM / ATI HD7310M
 

Оффлайн Сергей

Re: Не могу попасть в консоль
« Ответ #6 : 04 Августа 2013, 13:55:18 »
Сейчас компьютер занят. Освободится попробую.
Может систему переставить, тем самым исключив мои предыдущие действия?
 

Оффлайн Сергей

Re: Не могу попасть в консоль
« Ответ #7 : 06 Августа 2013, 19:40:15 »
vladimir_ar
Спасибо! radeon.modeset=0 помогло.

Если не трудно, раскажи что это за параметр?
И как он относится к моей видеокарте?
 

Оффлайн vladimir_ar

Re: Не могу попасть в консоль
« Ответ #8 : 06 Августа 2013, 20:39:30 »
И как он относится к моей видеокарте?
Наверное, как и к АТИ - АМД.
Если не трудно, раскажи что это за параметр?
Особо как-то не вникал. Судя по названию - отключения разных нестандартных режимов работы, которые корректно могут понять, скорее всего, родные драйвера.

Сообщение объединено: 06 Августа 2013, 20:42:19
Я бы на Вашем месте поискал бы родные лрайвера
AMD Geode™ LX Processor Linux
« Последнее редактирование: 06 Августа 2013, 20:42:19 от vladimir_ar »
Debian Testing, kernel 3.16-2-amd64, OpenBox
AMD A8-3750 / 16Gb RAM / ATI HD6550D (onboard) / Sound ASUS Xonar - DS
_______________________________
Debian Testing, kernel 3.14-2-amd64, OpenBox
HP-655 AMD E1 / 8Gb RAM / ATI HD7310M
 

Оффлайн Сергей

Re: [Решено] Не могу попасть в консоль
« Ответ #9 : 07 Августа 2013, 20:31:09 »
Цитировать
Я бы на Вашем месте поискал бы родные лрайвера
AMD Geode™ LX Processor Linux

На этом ресурсе нашёл только, (на мой взгляд) наиболее подходящею версию за 2004 год. Graphics_LinuxXFree86_GX2_2.7.12_src.tar.gz.
И для ядра 2.4.
Скачивал, читал редми. Может быть не то нашёл или не так искал.

На этом ресурсе вроде бы посвежее. http://cgit.freedesktop.org/xorg/driver/xf86-video-geode
Но она же есть и в стандартных репах. Только в репах 2.11.13  а там  2.11.14.

На чём мне остановиться?
И как найти драйвер именно для моей видиокарты?
 

Теги:
     

    Обновление до 6.01 [РЕШЕНО]

    Автор alastor

    Ответов: 7
    Просмотров: 3194
    Последний ответ 29 Апреля 2011, 23:47:06
    от alastor
    [Решено] черный экран после установки

    Автор zhenya590

    Ответов: 9
    Просмотров: 8436
    Последний ответ 29 Ноября 2013, 22:28:05
    от gardarea51
    [РЕШЕНО] Виснет при запуске программа разметки

    Автор duletant

    Ответов: 8
    Просмотров: 4428
    Последний ответ 06 Февраля 2012, 15:34:52
    от duletant
    Установка Debian 8 с флешки (grub4dos) [Решено]

    Автор vladimirn

    Ответов: 10
    Просмотров: 5447
    Последний ответ 11 Мая 2017, 08:18:54
    от ogost
    [Решено] Есть ли образ Debian на Yandex?

    Автор Alex888

    Ответов: 4
    Просмотров: 2142
    Последний ответ 03 Января 2014, 17:25:12
    от Alex888