Debian виснет наглухо

Thomas · 20 мая 2011, 01:55:26

Имеется такая вот проблема:
Стоит Debian Squeeze, и время от времени виснет наглухо. Закономерности не нашёл. Проблема появилась после установки бинарных дров на видео. Само видео - Radeon x800. Встроенное видео на мамке отключено.
Вытащил этот Readeon, поставил дрова на встроенное (GeForce 7025), проблема осталась.
На Ubuntu проблема та же.
Под deb выделено 10Gb ext3.
cpu: Athlon 64 x2 4200+
mb: GA-M68M-S2P
ram: 2Gb 800Mhz
Windows 7 работает без тормозов, в играх бывают лаги, но это связанно скорее с недостатком рамы. Как можно решить проблему?

Ghostdmn · 20 мая 2011, 02:03:29

Дебиан для какой архитектуры стоит? Что за ядро?
При таких вводных данных проблемы могут быть от неправильно скачанного образа до железа...

Упс · 20 мая 2011, 02:21:29

ЦитироватьПроблема появилась после установки бинарных дров на видео. Само видео - Radeon x800.

А конкретней про дрова? Что, откуда и как ставил?

eof · 20 мая 2011, 12:41:02

Цитата: Упс от 20 мая 2011, 02:21:29
ЦитироватьПроблема появилась после установки бинарных дров на видео. Само видео - Radeon x800.
А конкретней про дрова? Что, откуда и как ставил?

Думаю есть смысл ещё попробовать с vesa (пакет xserver-xorg-video-vesa).
Если с vesa будет нормально работать, то причина скорее-всего в драйверах на radeon.

Udachnik · 20 мая 2011, 12:52:50

Цитата: eof от 20 мая 2011, 12:41:02
Думаю есть смысл ещё попробовать с vesa (пакет xserver-xorg-video-vesa).
Если с vesa будет нормально работать, то причина скорее-всего в драйверах на radeon.

Вы пост ТС-а не пытались полностью прочитать? Там написано, что виснет не только с радеоном, но и со встроенной нвидией. Так что проблема не в этом.

Thomas · 20 мая 2011, 14:16:44

Архитектура i386, ядро Linux 2.6.32-5-686, ставил по ману отсюда:
http://wiki.debian.org/ru/AtiHowTo
Дрова из non-free репозитория Debian squeeze вроде.
На открытых дровах не висла (по крайней мере - не успела), но 15fps меня не устраивает.

Ghostdmn · 20 мая 2011, 15:13:13

Для начала я бы посоветовал amd64 поставить. Как ни странно, с установкой под 386 у меня тоже зависания были. Ну а вообще есть разные варианты, ядро поставить другое...

Thomas, когда система вешается CTRL+ALT+F1 работает?

Brainey · 20 мая 2011, 16:11:15

Можно увидеть вывод от от dmesg под спойлером?

Thomas · 23 мая 2011, 16:15:26

Цитата: Ghostdmn от 20 мая 2011, 15:13:13
Для начала я бы посоветовал amd64 поставить. Как ни странно, с установкой под 386 у меня тоже зависания были. Ну а вообще есть разные варианты, ядро поставить другое...

Thomas, когда система вешается CTRL+ALT+F1 работает?

Переустанавливать сейчас нет ни времени ни желания, а ядро пересобрать - знаний нет. Ctrl+Alt+F* не работают.

Цитата: Brainey от 20 мая 2011, 16:11:15
Можно увидеть вывод от от dmesg под спойлером?

Открыть содержимое (спойлер)

[ 0.152390] NET: Registered protocol family 16
[ 0.152390] ACPI: bus type pci registered
[ 0.152390] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.152390] PCI: MCFG area at e0000000 reserved in E820
[ 0.152390] PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 127
[ 0.152390] PCI: Using MMCONFIG for extended config space
[ 0.152390] PCI: Using configuration type 1 for base access
[ 0.152485] bio: create slab <bio-0> at 0
[ 0.152556] ACPI: EC: Look up EC in DSDT
[ 0.159786] ACPI: Interpreter enabled
[ 0.159790] ACPI: (supports S0 S3 S4 S5)
[ 0.159809] ACPI: Using IOAPIC for interrupt routing
[ 0.167225] ACPI: No dock devices found.
[ 0.167309] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.167512] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
[ 0.167522] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.167527] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.167545] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.167551] pci 0000:00:01.1: PME# disabled
[ 0.167596] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.167617] pci 0000:00:02.0: supports D1 D2
[ 0.167620] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167623] pci 0000:00:02.0: PME# disabled
[ 0.167647] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.167672] pci 0000:00:02.1: supports D1 D2
[ 0.167675] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167678] pci 0000:00:02.1: PME# disabled
[ 0.167739] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.167773] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.167777] pci 0000:00:07.0: reg 14 io port: [0xec00-0xec07]
[ 0.167797] pci 0000:00:07.0: supports D1 D2
[ 0.167800] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167804] pci 0000:00:07.0: PME# disabled
[ 0.167824] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.167828] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.167832] pci 0000:00:08.0: reg 18 io port: [0x970-0x977]
[ 0.167836] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73]
[ 0.167840] pci 0000:00:08.0: reg 20 io port: [0xd800-0xd80f]
[ 0.167844] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.167872] pci 0000:00:08.1: reg 10 io port: [0x9e0-0x9e7]
[ 0.167876] pci 0000:00:08.1: reg 14 io port: [0xbe0-0xbe3]
[ 0.167880] pci 0000:00:08.1: reg 18 io port: [0x960-0x967]
[ 0.167884] pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63]
[ 0.167888] pci 0000:00:08.1: reg 20 io port: [0xc400-0xc40f]
[ 0.167892] pci 0000:00:08.1: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.167938] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167941] pci 0000:00:09.0: PME# disabled
[ 0.168055] pci 0000:01:07.0: reg 10 io port: [0xbc00-0xbc1f]
[ 0.168064] pci 0000:01:07.0: reg 14 64bit mmio: [0xfbe00000-0xfbffffff]
[ 0.168073] pci 0000:01:07.0: reg 1c 64bit mmio: [0xf4000000-0xf7ffffff]
[ 0.168095] pci 0000:01:07.0: supports D1 D2
[ 0.168126] pci 0000:00:04.0: transparent bridge
[ 0.168129] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff]
[ 0.168133] pci 0000:00:04.0: bridge 32bit mmio: [0xf4000000-0xfbffffff]
[ 0.168136] pci 0000:00:04.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.168159] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.168166] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdef0000-0xfdefffff]
[ 0.168171] pci 0000:02:00.0: reg 20 io port: [0xac00-0xacff]
[ 0.168179] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.168192] pci 0000:02:00.0: supports D1 D2
[ 0.168217] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdee0000-0xfdeeffff]
[ 0.168241] pci 0000:02:00.1: supports D1 D2
[ 0.168254] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.168300] pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
[ 0.168303] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.168307] pci 0000:00:09.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.168313] pci_bus 0000:00: on NUMA node 0
[ 0.168317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.168496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.201546] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[ 0.201685] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[ 0.201822] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.201959] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.202095] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.202232] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.202369] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.202506] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.202643] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.202780] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.202919] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.203060] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 0.203196] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.203334] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.203472] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.203610] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.203754] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.203892] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.204041] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 0.204221] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.204392] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.204562] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.204733] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.204903] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.205074] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.205244] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.205415] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.205586] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
[ 0.205758] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.205929] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.206101] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.206272] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[ 0.206444] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.206616] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.206787] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.206959] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.207131] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.207302] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.207404] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.207407] vgaarb: loaded
[ 0.207426] PCI: Using ACPI for IRQ routing
[ 0.207426] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.207426] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.207426] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.212022] Switching to clocksource hpet
[ 0.213104] pnp: PnP ACPI init
[ 0.213118] ACPI: bus type pnp registered
[ 0.216859] pnp: PnP ACPI: found 14 devices
[ 0.216861] ACPI: ACPI bus type pnp unregistered
[ 0.216865] PnPBIOS: Disabled by ACPI PNP
[ 0.216875] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.216879] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.216882] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.216885] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.216888] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.216892] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.216895] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.216899] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.216905] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.216908] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.216911] system 00:02: ioport range 0x295-0x296 has been reserved
[ 0.216914] system 00:02: ioport range 0x290-0x294 has been reserved
[ 0.216921] system 00:0c: iomem range 0xe0000000-0xe7ffffff has been reserved
[ 0.216927] system 00:0d: iomem range 0xce400-0xcffff has been reserved
[ 0.216930] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.216933] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.216936] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.216940] system 00:0d: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.216943] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.216946] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.216950] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.216953] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.216957] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.251699] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.251702] pci 0000:00:04.0: IO window: 0xb000-0xbfff
[ 0.251706] pci 0000:00:04.0: MEM window: 0xf4000000-0xfbffffff
[ 0.251710] pci 0000:00:04.0: PREFETCH window: 0xfdf00000-0xfdffffff
[ 0.251716] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.251719] pci 0000:00:09.0: IO window: 0xa000-0xafff
[ 0.251722] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff
[ 0.251725] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.251734] pci 0000:00:04.0: setting latency timer to 64
[ 0.251739] pci 0000:00:09.0: setting latency timer to 64
[ 0.251743] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.251746] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.251749] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.251752] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xfbffffff]
[ 0.251754] pci_bus 0000:01: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.251757] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.251760] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.251763] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.251766] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.251769] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.251800] NET: Registered protocol family 2
[ 0.251887] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.252206] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.252761] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.253044] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.253047] TCP reno registered
[ 0.253137] NET: Registered protocol family 1
[ 0.253249] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.253302] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.253352] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.253402] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.253456] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.253466] pci 0000:02:00.0: Boot video device
[ 0.253515] Unpacking initramfs...
[ 0.461707] Freeing initrd memory: 8403k freed
[ 0.466596] audit: initializing netlink socket (disabled)
[ 0.466608] type=2000 audit(1306163447.464:1): initialized
[ 0.469773] highmem bounce pool size: 64 pages
[ 0.469777] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.471090] VFS: Disk quotas dquot_6.5.2
[ 0.471141] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.471209] msgmni has been set to 1723
[ 0.471439] alg: No test for stdrng (krng)
[ 0.471490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.471493] io scheduler noop registered
[ 0.471495] io scheduler anticipatory registered
[ 0.471497] io scheduler deadline registered
[ 0.471528] io scheduler cfq registered (default)
[ 0.471617] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
[ 0.471622] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.471751] isapnp: Scanning for PnP cards...
[ 0.824430] isapnp: No Plug & Play device found
[ 0.825740] Linux agpgart interface v0.103
[ 0.825962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.826050] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.826322] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.826458] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.826461] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.826612] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.826680] mice: PS/2 mouse device common for all mice
[ 0.826726] rtc_cmos 00:05: RTC can wake from S4
[ 0.826754] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.826792] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.826803] cpuidle: using governor ladder
[ 0.826805] cpuidle: using governor menu
[ 0.826809] No iBFT detected.
[ 0.827172] TCP cubic registered
[ 0.827300] NET: Registered protocol family 10
[ 0.828089] Mobile IPv6
[ 0.828092] NET: Registered protocol family 17
[ 0.828105] Using IPI No-Shortcut mode
[ 0.828168] PM: Resume from disk failed.
[ 0.828179] registered taskstats version 1
[ 0.828445] rtc_cmos 00:05: setting system clock to 2011-05-23 15:10:48 UTC (1306163448)
[ 0.828473] Initalizing network drop monitor service
[ 0.828520] Freeing unused kernel memory: 380k freed
[ 0.828757] Write protecting the kernel text: 2504k
[ 0.828781] Write protecting the kernel read-only data: 920k
[ 0.843530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.844479] udev[56]: starting version 164
[ 0.946369] usbcore: registered new interface driver usbfs
[ 0.946493] usbcore: registered new interface driver hub
[ 0.946619] usbcore: registered new device driver usb
[ 0.964187] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.964493] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.964526] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.964531] forcedeth 0000:00:07.0: setting latency timer to 64
[ 0.964578] SCSI subsystem initialized
[ 0.985785] libata version 3.00 loaded.
[ 0.985964] Floppy drive(s): fd0 is 1.44M
[ 0.994213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.004128] FDC 0 is a post-1991 82077
[ 1.029841] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr 6c:f0:49:9b:ba:14
[ 1.029846] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.029872] sata_nv 0000:00:08.0: version 3.5
[ 1.030172] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
[ 1.030184] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 22 (level, low) -> IRQ 22
[ 1.030232] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.030292] scsi0 : sata_nv
[ 1.030386] scsi1 : sata_nv
[ 1.030526] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 22
[ 1.030529] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 22
[ 1.030809] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 1.030817] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 1.030827] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.030830] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.030852] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.030878] ehci_hcd 0000:00:02.1: debug port 1
[ 1.030885] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.030901] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
[ 1.040014] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.040033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.040036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.040038] usb usb1: Product: EHCI Host Controller
[ 1.040040] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.040043] usb usb1: SerialNumber: 0000:00:02.1
[ 1.040121] usb usb1: configuration #1 chosen from 1 choice
[ 1.040151] hub 1-0:1.0: USB hub found
[ 1.040158] hub 1-0:1.0: 10 ports detected
[ 1.040233] pata_amd 0000:00:06.0: version 0.4.1
[ 1.040265] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.040398] scsi2 : pata_amd
[ 1.040545] scsi3 : pata_amd
[ 1.041106] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.041109] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.041498] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 1.041508] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
[ 1.041552] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.041787] scsi4 : sata_nv
[ 1.041879] scsi5 : sata_nv
[ 1.042016] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
[ 1.042019] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
[ 1.204298] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S202H, SB00, max UDMA/66
[ 1.204321] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[ 1.220237] ata3.00: configured for UDMA/66
[ 1.362240] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.496032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.504291] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[ 1.504295] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.520302] ata1.00: configured for UDMA/133
[ 1.520433] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 1.988529] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.996699] ata2.00: ATA-7: SAMSUNG SP0812C, SU100-25, max UDMA7
[ 1.996702] ata2.00: 156368016 sectors, multi 16: LBA48
[ 2.004214] ata2.00: configured for UDMA/133
[ 2.004299] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP0812C SU10 PQ: 0 ANSI: 5
[ 2.004964] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202H SB00 PQ: 0 ANSI: 5
[ 2.005117] ata4: port disabled. ignoring.
[ 2.326240] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.328427] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.328742] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 2.328747] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 2.328763] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.328766] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.328781] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.328812] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 2.338470] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.338474] Uniform CD-ROM driver Revision: 3.20
[ 2.338729] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.340161] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.340218] sd 0:0:0:0: [sda] Write Protect is off
[ 2.340221] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.340226] sd 1:0:0:0: [sdb] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.340242] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.340277] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.340280] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.340300] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.340399] sda:
[ 2.340533] sdb:
[ 2.344070] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.344105] sdb1
[ 2.344478] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.345096] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.345161] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 2.358347] sda1 sda2 < sda5 > sda3 sda4
[ 2.386022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.386026] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.386029] usb usb2: Product: OHCI Host Controller
[ 2.386031] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 2.386034] usb usb2: SerialNumber: 0000:00:02.0
[ 2.386125] usb usb2: configuration #1 chosen from 1 choice
[ 2.386156] hub 2-0:1.0: USB hub found
[ 2.386168] hub 2-0:1.0: 10 ports detected
[ 2.396375] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.764015] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 2.807641] PM: Starting manual resume from disk
[ 2.807645] PM: Resume from partition 8:4
[ 2.807647] PM: Checking hibernation image.
[ 2.807799] PM: Error -22 checking image file
[ 2.807802] PM: Resume from disk failed.
[ 2.836569] kjournald starting. Commit interval 5 seconds
[ 2.836588] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.981032] usb 2-2: New USB device found, idVendor=09da, idProduct=0080
[ 2.981036] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.981039] usb 2-2: Product: USB Mouse
[ 2.981041] usb 2-2: Manufacturer: A4Tech
[ 2.981126] usb 2-2: configuration #1 chosen from 1 choice
[ 4.073866] udev[392]: starting version 164
[ 4.256358] processor LNXCPU:00: registered as cooling_device0
[ 4.256392] processor LNXCPU:01: registered as cooling_device1
[ 4.270785] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 4.270793] ACPI: Power Button [PWRB]
[ 4.270882] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.270886] ACPI: Power Button [PWRF]
[ 4.310368] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.575609] [drm] Initialized drm 1.1.0 20060810
[ 4.678504] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.879757] parport_pc 00:0a: reported by Plug and Play ACPI
[ 4.879803] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.893617] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 4.893643] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[ 5.052052] [drm] radeon kernel modesetting enabled.
[ 5.052412] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 5.052424] radeon 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[ 5.052429] radeon 0000:02:00.0: setting latency timer to 64
[ 5.054002] [drm] radeon: Initializing kernel modesetting.
[ 5.054093] [drm] register mmio base: 0xFDEF0000
[ 5.054095] [drm] register mmio size: 65536
[ 5.054566] ATOM BIOS: X800GTO
[ 5.054790] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 5.054803] [drm] Generation 2 PCI interface, using max accessible memory
[ 5.054806] [drm] radeon: VRAM 256M
[ 5.054807] [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
[ 5.054809] [drm] radeon: GTT 512M
[ 5.054811] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 5.054851] radeon 0000:02:00.0: irq 25 for MSI/MSI-X
[ 5.054856] radeon 0000:02:00.0: radeon: using MSI.
[ 5.054873] [drm] radeon: irq initialized.
[ 5.055046] [drm] Detected VRAM RAM=256M, BAR=256M
[ 5.055051] [drm] RAM width 256bits DDR
[ 5.055133] [TTM] Zone kernel: Available graphics memory: 441390 kiB.
[ 5.055135] [TTM] Zone highmem: Available graphics memory: 1037330 kiB.
[ 5.055153] [drm] radeon: 256M of VRAM memory ready
[ 5.055155] [drm] radeon: 512M of GTT memory ready.
[ 5.055172] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.055678] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 5.055687] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[ 5.055696] [drm] radeon: cp idle (0x10000C03)
[ 5.055740] [drm] Loading R400 Microcode
[ 5.055743] platform radeon_cp.0: firmware: requesting radeon/R420_cp.bin
[ 5.098963] usbcore: registered new interface driver hiddev
[ 5.105336] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4
[ 5.105428] generic-usb 0003:09DA:0080.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:02.0-2/input0
[ 5.105456] usbcore: registered new interface driver usbhid
[ 5.105459] usbhid: v2.6:USB HID core driver
[ 5.173991] [drm] radeon: ring at 0x0000000020000000
[ 5.174012] [drm] ring test succeeded in 1 usecs
[ 5.174133] [drm] radeon: ib pool ready.
[ 5.174201] [drm] ib test succeeded in 0 usecs
[ 5.174227] [drm] Default TV standard: PAL
[ 5.174290] [drm] Default TV standard: PAL
[ 5.174347] [drm] Radeon Display Connectors
[ 5.174349] [drm] Connector 0:
[ 5.174351] [drm] VGA
[ 5.174353] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 5.174355] [drm] Encoders:
[ 5.174357] [drm] CRT1: INTERNAL_DAC1
[ 5.174358] [drm] Connector 1:
[ 5.174360] [drm] S-video
[ 5.174361] [drm] Encoders:
[ 5.174363] [drm] TV1: INTERNAL_DAC2
[ 5.174364] [drm] Connector 2:
[ 5.174366] [drm] DVI-I
[ 5.174367] [drm] HPD1
[ 5.174369] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 5.174371] [drm] Encoders:
[ 5.174373] [drm] CRT2: INTERNAL_DAC2
[ 5.174374] [drm] DFP1: INTERNAL_TMDS1
[ 5.196170] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 5.196183] SB-XFi 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 5.309147] [drm] fb mappable at 0xD00C0000
[ 5.309150] [drm] vram apper at 0xD0000000
[ 5.309152] [drm] size 5242880
[ 5.309153] [drm] fb depth is 24
[ 5.309155] [drm] pitch is 5120
[ 5.368597] Console: switching to colour frame buffer device 160x64
[ 5.376588] fb0: radeondrmfb frame buffer device
[ 5.376590] registered panic notifier
[ 5.376652] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0
[ 6.554358] Adding 1052248k swap on /dev/sda4. Priority:-1 extents:1 across:1052248k
[ 6.716576] EXT3 FS on sda3, internal journal
[ 6.796714] loop: module loaded
[ 7.840700] fuse init (API version 7.13)
[ 9.858035] forcedeth 0000:00:07.0: irq 26 for MSI/MSI-X
[ 11.222442] Bluetooth: Core ver 2.15
[ 11.222499] NET: Registered protocol family 31
[ 11.222500] Bluetooth: HCI device and connection manager initialized
[ 11.222504] Bluetooth: HCI socket layer initialized
[ 11.259476] Bluetooth: L2CAP ver 2.14
[ 11.259479] Bluetooth: L2CAP socket layer initialized
[ 11.324715] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.324719] Bluetooth: BNEP filters: protocol multicast
[ 11.898650] Bridge firewalling registered
[ 11.900096] Bluetooth: RFCOMM TTY layer initialized
[ 11.900101] Bluetooth: RFCOMM socket layer initialized
[ 11.900103] Bluetooth: RFCOMM ver 1.11
[ 12.138585] Bluetooth: SCO (Voice Link) ver 0.6
[ 12.138589] Bluetooth: SCO socket layer initialized
[ 12.224912] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[ 12.224960] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xc
[ 12.224963] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xe
[ 12.224966] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10
[ 12.224968] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 12.508018] Clocksource tsc unstable (delta = -135613688 ns)
[ 12.838983] lp0: using parport0 (interrupt-driven).
[ 13.009456] ppdev: user-space parallel port driver
[ 20.612516] eth0: no IPv6 routers present
[ 21.492181] CPU0 attaching NULL sched-domain.
[ 21.492190] CPU1 attaching NULL sched-domain.
[ 21.528420] CPU0 attaching sched-domain:
[ 21.528425] domain 0: span 0-1 level MC
[ 21.528428] groups: 0 1
[ 21.528433] CPU1 attaching sched-domain:
[ 21.528435] domain 0: span 0-1 level MC
[ 21.528437] groups: 1 0

[свернуть]

Brainey · 24 мая 2011, 15:59:48

Проверьте файловую систему. Для этого:
1) Загрузитесь с Live CD
2) Откройте терминал и введите:

Код Выделить

# fsck /dev/sd**
где sd** - раздел с установленным Debian
Узнать список всех разделов можно с помощью команды

Код Выделить

# fdisk -l