Моргает экран

ihammers · 23 июня 2014, 05:23:21

Цитата: ssorgoth от 22 июня 2014, 14:46:07
После установки этого драйвера перестала работать панель клавиш нум-лока.

Выводы dmesg (под спойлер), подключали другую клавиатуру для теста проблемы? Что показывает fglrxinfo?

ssorgoth · 24 июня 2014, 16:52:38

dmesg

Открыть содержимое (спойлер)

[    0.362450] pnp 00:0a: [irq 12]
[    0.362508] pnp 00:0a: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.363017] pnp 00:0b: [mem 0x60000000-0x7fffffff]
[    0.363129] system 00:0b: [mem 0x60000000-0x7fffffff] has been reserved
[    0.363136] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375927] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[    0.376035] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.376046] pnp: PnP ACPI: found 13 devices
[    0.376050] ACPI: ACPI bus type pnp unregistered
[    0.388361] PCI: max bus depth: 1 pci_try_num: 2
[    0.388486] pci 0000:00:15.3: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.388494] pci 0000:00:15.3: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.388504] pci 0000:00:15.3: BAR 13: assigned [io  0x1000-0x1fff]
[    0.388510] pci 0000:00:15.2: BAR 14: assigned [mem 0x80400000-0x807fffff]
[    0.388517] pci 0000:00:15.1: BAR 14: assigned [mem 0x80800000-0x809fffff]
[    0.388524] pci 0000:00:15.1: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.388532] pci 0000:00:15.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.388539] pci 0000:00:15.0: BAR 15: assigned [mem 0x80c00000-0x80dfffff 64bit pref]
[    0.388547] pci 0000:00:15.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.388553] pci 0000:00:04.0: BAR 14: assigned [mem 0x80e00000-0x80ffffff]
[    0.388559] pci 0000:00:04.0: BAR 15: assigned [mem 0x81000000-0x811fffff 64bit pref]
[    0.388567] pci 0000:00:04.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.388573] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.388579] pci 0000:00:04.0:   bridge window [io  0x4000-0x4fff]
[    0.388585] pci 0000:00:04.0:   bridge window [mem 0x80e00000-0x80ffffff]
[    0.388591] pci 0000:00:04.0:   bridge window [mem 0x81000000-0x811fffff 64bit pref]
[    0.388600] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[    0.388654] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.388659] pci 0000:00:15.0:   bridge window [io  0x3000-0x3fff]
[    0.388667] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.388674] pci 0000:00:15.0:   bridge window [mem 0x80c00000-0x80dfffff 64bit pref]
[    0.388683] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[    0.388688] pci 0000:00:15.1:   bridge window [io  0x2000-0x2fff]
[    0.388696] pci 0000:00:15.1:   bridge window [mem 0x80800000-0x809fffff]
[    0.388703] pci 0000:00:15.1:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.388712] pci 0000:00:15.2: PCI bridge to [bus 05-05]
[    0.388717] pci 0000:00:15.2:   bridge window [io  0xe000-0xefff]
[    0.388725] pci 0000:00:15.2:   bridge window [mem 0x80400000-0x807fffff]
[    0.388731] pci 0000:00:15.2:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.388740] pci 0000:00:15.3: PCI bridge to [bus 06-06]
[    0.388745] pci 0000:00:15.3:   bridge window [io  0x1000-0x1fff]
[    0.388753] pci 0000:00:15.3:   bridge window [mem 0x80000000-0x801fffff]
[    0.388759] pci 0000:00:15.3:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.388804] pci 0000:00:04.0: setting latency timer to 64
[    0.388827] pci 0000:00:15.0: setting latency timer to 64
[    0.388843] pci 0000:00:15.1: setting latency timer to 64
[    0.388858] pci 0000:00:15.2: setting latency timer to 64
[    0.388873] pci 0000:00:15.3: setting latency timer to 64
[    0.388880] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.388884] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.388888] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.388891] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.388895] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.388899] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.388903] pci_bus 0000:00: resource 10 [mem 0x80000000-0xffffffff]
[    0.388908] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.388912] pci_bus 0000:01: resource 1 [mem 0x80e00000-0x80ffffff]
[    0.388916] pci_bus 0000:01: resource 2 [mem 0x81000000-0x811fffff 64bit pref]
[    0.388921] pci_bus 0000:02: resource 4 [io  0x0000-0x03af]
[    0.388925] pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7]
[    0.388928] pci_bus 0000:02: resource 6 [io  0x03b0-0x03df]
[    0.388932] pci_bus 0000:02: resource 7 [io  0x0d00-0xffff]
[    0.388936] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[    0.388940] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[    0.388944] pci_bus 0000:02: resource 10 [mem 0x80000000-0xffffffff]
[    0.388948] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.388952] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.388956] pci_bus 0000:03: resource 2 [mem 0x80c00000-0x80dfffff 64bit pref]
[    0.388961] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.388965] pci_bus 0000:04: resource 1 [mem 0x80800000-0x809fffff]
[    0.388969] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.388973] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.388977] pci_bus 0000:05: resource 1 [mem 0x80400000-0x807fffff]
[    0.388981] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.388986] pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
[    0.388990] pci_bus 0000:06: resource 1 [mem 0x80000000-0x801fffff]
[    0.388994] pci_bus 0000:06: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.389133] NET: Registered protocol family 2
[    0.389331] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.390545] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.393326] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.393942] TCP: Hash tables configured (established 262144 bind 65536)
[    0.393948] TCP reno registered
[    0.393972] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.394011] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.394256] NET: Registered protocol family 1
[    0.394288] pci 0000:00:01.0: Boot video device
[    1.172240] PCI: CLS 64 bytes, default 64
[    1.172355] Unpacking initramfs...
[    1.597758] Freeing initrd memory: 10564k freed
[    1.605351] perf: AMD IBS detected (0x000000ff)
[    1.605895] audit: initializing netlink socket (disabled)
[    1.605926] type=2000 audit(1403606816.604:1): initialized
[    1.629360] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.630417] VFS: Disk quotas dquot_6.5.2
[    1.630549] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.630728] msgmni has been set to 3002
[    1.631181] alg: No test for stdrng (krng)
[    1.631251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.631259] io scheduler noop registered
[    1.631262] io scheduler deadline registered
[    1.631336] io scheduler cfq registered (default)
[    1.631941] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.631984] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.631988] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.632729] efifb: probing for efifb
[    1.633252] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011b00000, using 1920k, total 1920k
[    1.633257] efifb: mode is 800x600x32, linelength=3200, pages=1
[    1.633260] efifb: scrolling: redraw
[    1.633265] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.636529] Console: switching to colour frame buffer device 100x37
[    1.639415] fb0: EFI VGA frame buffer device
[    1.639480] ERST: Table is not found!
[    1.639483] GHES: HEST is not enabled!
[    1.639673] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.677199] Linux agpgart interface v0.103
[    1.677456] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[    1.681045] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.681061] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.681453] mousedev: PS/2 mouse device common for all mice
[    1.681746] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.681838] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.681862] cpuidle: using governor ladder
[    1.681866] cpuidle: using governor menu
[    1.682286] TCP cubic registered
[    1.682422] NET: Registered protocol family 10
[    1.683377] Mobile IPv6
[    1.683383] NET: Registered protocol family 17
[    1.683392] Registering the dns_resolver key type
[    1.683826] PM: Hibernation image not present or could not be loaded.
[    1.683851] registered taskstats version 1
[    1.684841] rtc_cmos 00:04: setting system clock to 2014-06-24 10:46:57 UTC (1403606817)
[    1.684994] Initializing network drop monitor service
[    1.687435] Freeing unused kernel memory: 580k freed
[    1.687758] Write protecting the kernel read-only data: 6144k
[    1.692978] Freeing unused kernel memory: 648k freed
[    1.698673] Freeing unused kernel memory: 688k freed
[    1.700240] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.725496] udevd[49]: starting version 175
[    1.785997] usbcore: registered new interface driver usbfs
[    1.786044] usbcore: registered new interface driver hub
[    1.786210] usbcore: registered new device driver usb
[    1.787254] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.787414] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.787467] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.787523] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.787560] QUIRK: Enable AMD PLL fix
[    1.787577] ehci_hcd 0000:00:12.2: debug port 1
[    1.787625] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4b000
[    1.791079] SCSI subsystem initialized
[    1.796185] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.796267] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.796272] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.796277] usb usb1: Product: EHCI Host Controller
[    1.796281] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.796285] usb usb1: SerialNumber: 0000:00:12.2
[    1.797186] hub 1-0:1.0: USB hub found
[    1.797198] hub 1-0:1.0: 5 ports detected
[    1.797497] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.797516] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.797530] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.797568] ehci_hcd 0000:00:13.2: debug port 1
[    1.797604] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb49000
[    1.808224] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.808305] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.808311] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.808315] usb usb2: Product: EHCI Host Controller
[    1.808319] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.808323] usb usb2: SerialNumber: 0000:00:13.2
[    1.808655] hub 2-0:1.0: USB hub found
[    1.808669] hub 2-0:1.0: 5 ports detected
[    1.809566] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.809715] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.809737] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.809835] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4c000
[    1.811446] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.811610] r8169 0000:05:00.0: setting latency timer to 64
[    1.811708] r8169 0000:05:00.0: irq 40 for MSI/MSI-X
[    1.814586] libata version 3.00 loaded.
[    1.830997] r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000064000, e8:03:9a:bd:65:b3, XID 0c900800 IRQ 40
[    1.831006] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.868897] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.868905] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.868910] usb usb3: Product: OHCI Host Controller
[    1.868914] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    1.868918] usb usb3: SerialNumber: 0000:00:12.0
[    1.869172] hub 3-0:1.0: USB hub found
[    1.869256] hub 3-0:1.0: 5 ports detected
[    1.869432] ahci 0000:00:11.0: version 3.0
[    1.869808] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.869816] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.872761] scsi0 : ahci
[    1.888309] scsi1 : ahci
[    1.896422] scsi2 : ahci
[    1.899000] scsi3 : ahci
[    1.899203] scsi4 : ahci
[    1.899379] scsi5 : ahci
[    1.899501] ata1: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d100 irq 19
[    1.899508] ata2: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d180 irq 19
[    1.899514] ata3: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d200 irq 19
[    1.899519] ata4: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d280 irq 19
[    1.899525] ata5: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d300 irq 19
[    1.899531] ata6: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d380 irq 19
[    1.899727] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.899754] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.899794] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4a000
[    1.956144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.956151] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.956156] usb usb4: Product: OHCI Host Controller
[    1.956160] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    1.956164] usb usb4: SerialNumber: 0000:00:13.0
[    1.956552] hub 4-0:1.0: USB hub found
[    1.956606] hub 4-0:1.0: 5 ports detected
[    1.956806] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.956824] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[    1.956862] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb48000
[    2.016112] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.016117] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.016121] usb usb5: Product: OHCI Host Controller
[    2.016125] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.016128] usb usb5: SerialNumber: 0000:00:14.5
[    2.016446] hub 5-0:1.0: USB hub found
[    2.016456] hub 5-0:1.0: 2 ports detected
[    2.220125] ata5: SATA link down (SStatus 0 SControl 300)
[    2.220184] ata4: SATA link down (SStatus 0 SControl 300)
[    2.220226] ata6: SATA link down (SStatus 0 SControl 300)
[    2.220259] ata3: SATA link down (SStatus 0 SControl 300)
[    2.276116] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[    2.388121] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.388167] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.394269] ata1.00: ATA-8: ST320LM001 HN-M320MBB, 2AR10002, max UDMA/133
[    2.394280] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.395831] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100
[    2.396486] ata2.00: configured for UDMA/100
[    2.400494] ata1.00: configured for UDMA/133
[    2.400907] scsi 0:0:0:0: Direct-Access     ATA      ST320LM001 HN-M3 2AR1 PQ: 0 ANSI: 5
[    2.404582] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208BB  SC00 PQ: 0 ANSI: 5
[    2.413685] usb 2-4: New USB device found, idVendor=2232, idProduct=1020
[    2.413694] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.413699] usb 2-4: Product: WebCam SC-0311139N
[    2.413703] usb 2-4: Manufacturer: Image Processor
[    2.413706] usb 2-4: SerialNumber: SM3711
[    2.421989] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.421996] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.422108] sd 0:0:0:0: [sda] Write Protect is off
[    2.422114] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.422162] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.430527] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.430542] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.430901] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.493975]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    2.495295] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.499760] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.499873] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.604121] Refined TSC clocksource calibration: 1646.493 MHz.
[    2.604169] Switching to clocksource tsc
[    2.676424] usb 3-3: new full-speed USB device number 2 using ohci_hcd
[    2.850835] usb 3-3: New USB device found, idVendor=0a5c, idProduct=219c
[    2.850849] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.850858] usb 3-3: Product: Broadcom BCM2070 Bluetooth Device
[    2.850866] usb 3-3: Manufacturer: Broadcom Corp
[    2.850874] usb 3-3: SerialNumber: 30144A23186C
[    3.116052] usb 3-5: new low-speed USB device number 3 using ohci_hcd
[    3.285796] usb 3-5: New USB device found, idVendor=046d, idProduct=c077
[    3.285810] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.285819] usb 3-5: Product: USB Optical Mouse
[    3.285827] usb 3-5: Manufacturer: Logitech
[    3.298190] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.0/input/input1
[    3.298451] generic-usb 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-5/input0
[    3.298490] usbcore: registered new interface driver usbhid
[    3.298493] usbhid: USB HID core driver
[    3.828434] microcode: CPU0: patch_level=0x05000101
[    3.834026] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[    3.837946] microcode: CPU0: new patch_level=0x0500010d
[    3.840236] microcode: CPU1: patch_level=0x05000101
[    3.844849] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[    3.848696] microcode: CPU1: new patch_level=0x0500010d
[    3.851095] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.919886] PM: Starting manual resume from disk
[    3.919896] PM: Hibernation image partition 8:8 present
[    3.919899] PM: Looking for hibernation image.
[    3.920311] PM: Image not found (code -22)
[    3.920319] PM: Hibernation image not present or could not be loaded.
[    3.936779] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[    3.936788] EXT4-fs (sda7): write access will be enabled during recovery
[    6.629752] EXT4-fs (sda7): orphan cleanup on readonly fs
[    6.629770] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1707406
[    6.629913] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1707402
[    6.629944] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1707403
[    6.629978] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1707407
[    6.630006] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1707398
[    6.708157] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1058545
[    6.720706] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1707396
[    6.725223] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1701157
[    6.725300] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1707397
[    6.725356] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1707395
[    6.725390] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 1707399
[    6.725422] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 392708
[    6.725459] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 392717
[    6.725569] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 392472
[    6.725589] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 392471
[    6.725605] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 392470
[    6.725624] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 392469
[    6.725640] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 392468
[    6.725654] EXT4-fs (sda7): 18 orphan inodes deleted
[    6.725658] EXT4-fs (sda7): recovery complete
[    7.874334] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   10.433948] udevd[362]: starting version 175
[   11.586665] EFI Variables Facility v0.08 2004-May-17
[   11.664704] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   11.913155] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[   11.913261] ACPI: Lid Switch [LID]
[   11.913382] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[   11.913392] ACPI: Power Button [PWRB]
[   11.913509] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[   11.913517] ACPI: Sleep Button [SLPB]
[   11.913641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   11.913647] ACPI: Power Button [PWRF]
[   11.914883] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   11.925027] ACPI: acpi_idle registered with cpuidle
[   11.927517] acpi device:31: registered as cooling_device1
[   11.927683] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[   11.927696] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[   11.937052] ACPI: AC Adapter [ADP1] (on-line)
[   12.001606] ACPI: Battery Slot [BAT1] (battery present)
[   12.160874] powernow-k8: Found 1 AMD E-450 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[   12.160959] powernow-k8:    0 : pstate 0 (1650 MHz)
[   12.160963] powernow-k8:    1 : pstate 1 (1320 MHz)
[   12.160966] powernow-k8:    2 : pstate 2 (825 MHz)
[   12.171513] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x354f00)
[   12.207654] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x15, 0x0c.
[   12.305542] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[   12.321913] cfg80211: Calling CRDA to update world regulatory domain
[   13.082446] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   13.403825] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   13.404119] SP5100 TCO timer: mmio address 0xbafe00 already in use
[   13.415505] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   13.415521] Disabling lock debugging due to kernel taint
[   13.450687] Bluetooth: Core ver 2.16
[   13.450782] NET: Registered protocol family 31
[   13.450790] Bluetooth: HCI device and connection manager initialized
[   13.450802] Bluetooth: HCI socket layer initialized
[   13.450810] Bluetooth: L2CAP socket layer initialized
[   13.451314] Bluetooth: SCO socket layer initialized
[   13.566473] [fglrx] Maximum main memory to use for locked dma buffers: 1399 MBytes.
[   13.566812] [fglrx]   vendor: 1002 device: 9806 count: 1
[   13.568159] [fglrx] ioport: bar 1, base 0xf000, size: 0x100
[   13.568201] pci 0000:00:01.0: setting latency timer to 64
[   13.569180] [fglrx] Kernel PAT support is enabled
[   13.569252] [fglrx] module loaded - fglrx 8.98.2 [Jul 19 2012] with 1 minors
[   13.586687] Linux media interface: v0.10
[   13.891769] snd_hda_intel 0000:00:01.1: irq 41 for MSI/MSI-X
[   13.891836] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[   14.003685] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   14.004336] usbcore: registered new interface driver btusb
[   14.035859] Linux video capture interface: v2.00
[   14.070672] brcmsmac 0000:03:00.0: bus 3 slot 0 func 0 irq 7
[   14.070700] brcmsmac 0000:03:00.0: enabling device (0000 -> 0002)
[   14.070735] brcmsmac 0000:03:00.0: setting latency timer to 64
[   14.158258] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   14.158637] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[   14.179924] uvcvideo: Found UVC 1.00 device WebCam SC-0311139N (2232:1020)
[   14.182318] input: WebCam SC-0311139N as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input10
[   14.183046] usbcore: registered new interface driver uvcvideo
[   14.183055] USB Video Class driver (1.1.1)
[   14.759068] cfg80211: World regulatory domain updated:
[   14.759083] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.759095] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.759105] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.759115] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.759124] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.759133] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.850902] brcmsmac 0000:03:00.0: firmware: agent loaded brcm/bcm43xx-0.fw into memory
[   14.999942] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   15.000363] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   15.039842] brcmsmac 0000:03:00.0: firmware: agent loaded brcm/bcm43xx_hdr-0.fw into memory
[   15.177506] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.179944] cfg80211: Calling CRDA for country: US
[   15.196557] cfg80211: Regulatory domain changed to country: US
[   15.196571] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.196583] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   15.196593] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   15.196603] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.196612] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.196622] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.196631] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   18.887454] Adding 3805180k swap on /dev/sda8.  Priority:-1 extents:1 across:3805180k 
[   18.940326] EXT4-fs (sda7): re-mounted. Opts: (null)
[   19.476651] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   19.721684] loop: module loaded
[   21.127862] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   22.816644] RPC: Registered named UNIX socket transport module.
[   22.816656] RPC: Registered udp transport module.
[   22.816663] RPC: Registered tcp transport module.
[   22.816670] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   22.861931] FS-Cache: Loaded
[   22.915010] FS-Cache: Netfs 'nfs' registered for caching
[   22.939541] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   24.925961] vboxdrv: Found 2 processor cores.
[   24.926571] vboxdrv: fAsync=0 offMin=0x39c offMax=0xcb7
[   24.926950] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   24.926956] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
[   25.150412] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   25.176476] NFSD: starting 90-second grace period
[   25.193631] vboxpci: IOMMU not found (not registered)
[   25.538692] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[   30.070084] Bluetooth: RFCOMM TTY layer initialized
[   30.070101] Bluetooth: RFCOMM socket layer initialized
[   30.070109] Bluetooth: RFCOMM ver 1.11
[   30.113621] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   30.113633] Bluetooth: BNEP filters: protocol multicast
[   31.236292] lp: driver loaded but no devices found
[   31.260641] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[   31.263478] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[   31.265519] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   31.267550] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   31.376302] ppdev: user-space parallel port driver
[   31.545851] r8169 0000:05:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
[   31.629069] r8169 0000:05:00.0: eth0: link down
[   31.630026] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.048924] wlan0: authenticate with 90:f6:52:80:37:7d (try 1)
[   33.051743] wlan0: authenticated
[   33.057455] wlan0: associate with 90:f6:52:80:37:7d (try 1)
[   33.061039] wlan0: RX AssocResp from 90:f6:52:80:37:7d (capab=0x431 status=0 aid=2)
[   33.061048] wlan0: associated
[   33.061618] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   33.063285] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   33.064946] ieee80211 phy0: changing basic rates failed: -22
[   33.066552] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   33.070289] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   33.072338] cfg80211: Calling CRDA for country: BY
[   33.361259] cfg80211: Regulatory domain changed to country: BY
[   33.361272] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   33.361282] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   33.361292] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   33.361301] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   33.361310] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   33.930938] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[   38.034194] [fglrx] ATIF platform detected with notification ID: 0x81
[   39.452934] fglrx_pci 0000:00:01.0: irq 42 for MSI/MSI-X
[   39.455123] [fglrx] Firegl kernel thread PID: 3317
[   39.455349] [fglrx] Firegl kernel thread PID: 3318
[   39.455586] [fglrx] Firegl kernel thread PID: 3319
[   39.455778] [fglrx] IRQ 42 Enabled
[   39.674689] [fglrx] Gart USWC size:472 M.
[   39.674701] [fglrx] Gart cacheable size:183 M.
[   39.674719] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   39.674728] [fglrx] Reserved FB block: Unshared offset:fe85000, size:17b000 
[   39.674738] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000 
[   41.153900] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88005be0e978 (20110623/exresop-422)
[   41.153916] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20110623/dswexec-460)
[   41.153926] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88005d783740), AE_AML_OPERAND_TYPE (20110623/psparse-536)
[   41.153945] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88005d7839c0), AE_AML_OPERAND_TYPE (20110623/psparse-536)
[   52.184875] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[   52.205035] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[   52.217504] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[   52.229944] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[   52.242392] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[   52.242406] psmouse serio1: issuing reconnect request
[   ...
[ 3268.643332] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 3268.660927] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 3268.673373] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 3268.685829] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 3268.698273] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 3268.698284] psmouse serio1: issuing reconnect request

[свернуть]

не все вместилось...

fglrxinfo

Код Выделить

No protocol specified
Error: unable to open display (null)

Других клавиатур не подключал. Но, до входа в систему при выборе пользователя нум-клавиши работают.

ihammers · 25 июня 2014, 05:01:39

Цитата: ssorgoth от 24 июня 2014, 16:52:38
fglrxinfo
Код Выделить Развернуть
No protocol specified Error: unable to open display (null)

Драйвер не работает, вывод должен быть на подобии следующего:

Код Выделить

~$ fglrxinfo 
display: :0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 6290 Graphics
OpenGL version string: 4.4.12874 Compatibility Profile Context 8.95

Попробуйте удалить все файлы от драйвера и переустановить его, установив только пакет fglrx-driver, остальное пусть установит система.

Насчёт клавиш... похоже, что проблема в конфигурационных файлах Xorg.org.

ssorgoth · 25 июня 2014, 20:35:18

Цитата: ihammers от 25 июня 2014, 05:01:39Попробуйте удалить все файлы от драйвера и переустановить его, установив только пакет fglrx-driver, остальное пусть установит система.

Удалил, потом при перезагрузке пришлось устанавливать через консоль. Были каке-то зависимости, но какое отношение они имеют к самому драйверу, непонятно.

Поможет ли вот это?..
display

Код Выделить

No protocol specified
display.im6: unable to open X server `:0' @ error/display.c/DisplayImageCommand/428.

ihammers · 26 июня 2014, 05:21:01

Смотря какие пакеты устанавливались, возможно файлы заголовков ядра, они нужны для сборки модулей ядра.

Что выдают следующие команды:

Код Выделить

~$ cat /var/log/Xorg.0.log
~$ dpkg -l | grep fglrx

ssorgoth · 01 июля 2014, 21:27:43

cat /var/log/Xorg.0.log

Открыть содержимое (спойлер)

[code][ 29.467]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 29.468] X Protocol Version 11, Revision 0
[ 29.468] Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
[ 29.468] Current Operating System: Linux carefree 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64
[ 29.468] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=afa33ff8-6276-43b3-ac2d-9778572ff239 ro mem=2048M quiet
[ 29.468] Build Date: 17 December 2013 07:37:58PM
[ 29.468] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau@debian.org>)
[ 29.468] Current version of pixman: 0.26.0
[ 29.468] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 29.468] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 29.469] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 1 20:19:32 2014
[ 29.491] (==) Using config file: "/etc/X11/xorg.conf"
[ 29.491] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 29.568] (==) ServerLayout "aticonfig Layout"
[ 29.568] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 29.568] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 29.569] (**) | |-->Device "aticonfig-Device[0]-0"
[ 29.569] (**) |-->Screen "aticonfig-Screen[0]-1" (1)
[ 29.569] (**) | |-->Monitor "aticonfig-Monitor[0]-1"
[ 29.569] (**) | |-->Device "aticonfig-Device[0]-1"
[ 29.570] (==) Automatically adding devices
[ 29.570] (==) Automatically enabling devices
[ 29.647] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 29.647] Entry deleted from font path.
[ 29.688] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 29.689] Entry deleted from font path.
[ 29.689] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 29.689] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 29.689] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 29.689] (II) Loader magic: 0x7f02691ccae0
[ 29.689] (II) Module ABI versions:
[ 29.689] X.Org ANSI C Emulation: 0.4
[ 29.689] X.Org Video Driver: 12.1
[ 29.689] X.Org XInput driver : 16.0
[ 29.689] X.Org Server Extension : 6.0
[ 29.691] (--) PCI:*(0:0:1:0) 1002:9806:144d:c589 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 29.692] (II) Open ACPI successful (/var/run/acpid.socket)
[ 29.692] (II) "extmod" will be loaded by default.
[ 29.692] (II) "dbe" will be loaded by default.
[ 29.692] (II) "glx" will be loaded by default.
[ 29.692] (II) "record" will be loaded by default.
[ 29.692] (II) "dri" will be loaded by default.
[ 29.692] (II) "dri2" will be loaded by default.
[ 29.692] (II) LoadModule: "extmod"
[ 30.061] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 30.138] (II) Module extmod: vendor="X.Org Foundation"
[ 30.139] compiled for 1.12.4, module version = 1.0.0
[ 30.139] Module class: X.Org Server Extension
[ 30.139] ABI class: X.Org Server Extension, version 6.0
[ 30.139] (II) Loading extension SELinux
[ 30.139] (II) Loading extension MIT-SCREEN-SAVER
[ 30.139] (II) Loading extension XFree86-VidModeExtension
[ 30.139] (II) Loading extension XFree86-DGA
[ 30.139] (II) Loading extension DPMS
[ 30.139] (II) Loading extension XVideo
[ 30.139] (II) Loading extension XVideo-MotionCompensation
[ 30.139] (II) Loading extension X-Resource
[ 30.139] (II) LoadModule: "dbe"
[ 30.139] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 30.193] (II) Module dbe: vendor="X.Org Foundation"
[ 30.193] compiled for 1.12.4, module version = 1.0.0
[ 30.193] Module class: X.Org Server Extension
[ 30.193] ABI class: X.Org Server Extension, version 6.0
[ 30.193] (II) Loading extension DOUBLE-BUFFER
[ 30.193] (II) LoadModule: "glx"
[ 30.193] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 30.512] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 30.512] compiled for 6.9.0, module version = 1.0.0
[ 30.513] (II) Loading extension GLX
[ 30.513] (II) LoadModule: "record"
[ 30.513] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 30.572] (II) Module record: vendor="X.Org Foundation"
[ 30.572] compiled for 1.12.4, module version = 1.13.0
[ 30.572] Module class: X.Org Server Extension
[ 30.572] ABI class: X.Org Server Extension, version 6.0
[ 30.572] (II) Loading extension RECORD
[ 30.572] (II) LoadModule: "dri"
[ 30.573] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 30.647] (II) Module dri: vendor="X.Org Foundation"
[ 30.647] compiled for 1.12.4, module version = 1.0.0
[ 30.647] ABI class: X.Org Server Extension, version 6.0
[ 30.647] (II) Loading extension XFree86-DRI
[ 30.647] (II) LoadModule: "dri2"
[ 30.647] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.670] (II) Module dri2: vendor="X.Org Foundation"
[ 30.670] compiled for 1.12.4, module version = 1.2.0
[ 30.670] ABI class: X.Org Server Extension, version 6.0
[ 30.670] (II) Loading extension DRI2
[ 30.670] (II) LoadModule: "fglrx"
[ 30.780] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 31.201] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 31.201] compiled for 1.4.99.906, module version = 14.10.2
[ 31.202] Module class: X.Org Video Driver
[ 31.202] (II) Loading sub module "fglrxdrm"
[ 31.202] (II) LoadModule: "fglrxdrm"
[ 31.202] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 31.216] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 31.216] compiled for 1.4.99.906, module version = 14.10.2
[ 31.216] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 31.217] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001
[ 31.217] (II) AMD Proprietary Linux Driver Build Date: May 5 2014 21:38:38
[ 31.217] (++) using VT number 7

[ 31.225] (WW) Falling back to old probe method for fglrx
[ 31.299] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 31.321] ukiDynamicMajor: found major device number 251
[ 31.321] ukiDynamicMajor: found major device number 251
[ 31.321] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 31.321] ukiOpenDevice: node name is /dev/ati/card0
[ 31.321] ukiOpenDevice: open result is 8, (OK)
[ 32.699] ukiOpenByBusid: ukiOpenMinor returns 8
[ 32.699] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 32.735] ukiDynamicMajor: found major device number 251
[ 32.735] ukiDynamicMajor: found major device number 251
[ 32.735] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 32.735] ukiOpenDevice: node name is /dev/ati/card0
[ 32.735] ukiOpenDevice: open result is 8, (OK)
[ 32.735] ukiOpenByBusid: ukiOpenMinor returns 8
[ 32.735] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 32.762] (--) Chipset Supported AMD Graphics Processor (0x9806) found
[ 32.762] (--) Chipset Supported AMD Graphics Processor (0x9806) found
[ 32.763] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 32.763] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 32.763] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found
[ 32.764] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
[ 32.766] (II) fglrx(0): pEnt->device->identifier=0x7f026ab23660
[ 32.766] (II) fglrx(1): pEnt->device->identifier=0x7f026ab23660
[ 32.766] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 32.767] (II) Loading sub module "vgahw"
[ 32.767] (II) LoadModule: "vgahw"
[ 32.768] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 32.775] (II) Module vgahw: vendor="X.Org Foundation"
[ 32.775] compiled for 1.12.4, module version = 0.1.0
[ 32.775] ABI class: X.Org Video Driver, version 12.1
[ 32.776] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 32.776] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 32.776] (==) fglrx(0): Default visual is TrueColor
[ 32.776] (**) fglrx(0): Option "DPMS" "true"
[ 32.776] (==) fglrx(0): RGB weight 888
[ 32.776] (II) fglrx(0): Using 8 bits per RGB
[ 32.776] (==) fglrx(0): Buffer Tiling is ON
[ 32.776] (II) Loading sub module "fglrxdrm"
[ 32.776] (II) LoadModule: "fglrxdrm"
[ 32.776] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 32.776] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 32.776] compiled for 1.4.99.906, module version = 14.10.2
[ 32.781] ukiDynamicMajor: found major device number 251
[ 32.781] ukiDynamicMajor: found major device number 251
[ 32.781] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 32.781] ukiOpenDevice: node name is /dev/ati/card0
[ 32.781] ukiOpenDevice: open result is 10, (OK)
[ 32.781] ukiOpenByBusid: ukiOpenMinor returns 10
[ 32.781] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 32.782] (**) fglrx(0): NoAccel = NO
[ 32.782] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 32.782] (--) fglrx(0): Chipset: "AMD Radeon HD 6320 Graphics" (Chipset = 0x9806)
[ 32.782] (--) fglrx(0): (PciSubVendor = 0x144d, PciSubDevice = 0xc589)
[ 32.782] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 32.782] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 32.782] (--) fglrx(0): MMIO registers at 0xfeb00000
[ 32.782] (--) fglrx(0): I/O port at 0x0000f000
[ 32.783] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 32.794] (II) fglrx(0): ATIF platform detected
[ 32.795] (II) fglrx(0): AC Adapter is used
[ 32.796] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 32.796] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 32.796] (II) fglrx(0): PCIE card detected
[ 32.796] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 32.796] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 32.796] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 32.797] (II) fglrx(0): RandR 1.2 support is enabled!
[ 32.797] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 32.797] (II) Loading sub module "fb"
[ 32.797] (II) LoadModule: "fb"
[ 32.797] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 32.808] (II) Module fb: vendor="X.Org Foundation"
[ 32.808] compiled for 1.12.4, module version = 1.0.0
[ 32.808] ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.808] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 32.808] (II) Loading sub module "ddc"
[ 32.808] (II) LoadModule: "ddc"
[ 32.808] (II) Module "ddc" already built-in
[ 33.017] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 33.017] (II) fglrx(0): Output DFP1 has no monitor section
[ 33.017] (II) fglrx(0): Output CRT1 has no monitor section
[ 33.017] (II) Loading sub module "ddc"
[ 33.017] (II) LoadModule: "ddc"
[ 33.017] (II) Module "ddc" already built-in
[ 33.017] (II) fglrx(0): Connected Display0: LVDS
[ 33.017] (II) fglrx(0): Display0 EDID data ---------------------------
[ 33.017] (II) fglrx(0): Manufacturer: SEC Model: 384a Serial#: 0
[ 33.017] (II) fglrx(0): Year: 2011 Week: 0
[ 33.017] (II) fglrx(0): EDID Version: 1.3
[ 33.018] (II) fglrx(0): Digital Display Input
[ 33.018] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 33.018] (II) fglrx(0): Gamma: 2.20
[ 33.018] (II) fglrx(0): No DPMS capabilities specified
[ 33.018] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 33.018] (II) fglrx(0): First detailed timing is preferred mode
[ 33.018] (II) fglrx(0): redX: 0.615 redY: 0.355 greenX: 0.355 greenY: 0.610
[ 33.018] (II) fglrx(0): blueX: 0.150 blueY: 0.100 whiteX: 0.313 whiteY: 0.329
[ 33.018] (II) fglrx(0): Manufacturer's mask: 0
[ 33.018] (II) fglrx(0): Supported detailed timing:
[ 33.018] (II) fglrx(0): clock: 70.7 MHz Image Size: 344 x 194 mm
[ 33.018] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
[ 33.018] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 792 v_border: 0
[ 33.018] (II) fglrx(0): Unknown vendor-specific block f
[ 33.018] (II) fglrx(0): SAMSUNG
[ 33.018] (II) fglrx(0): LTN156AT248
[ 33.018] (II) fglrx(0): EDID (in hex):
[ 33.018] (II) fglrx(0): 00ffffffffffff004ca34a3800000000
[ 33.018] (II) fglrx(0): 00150103802213780a81a59d5b5b9c26
[ 33.018] (II) fglrx(0): 19505400000001010101010101010101
[ 33.018] (II) fglrx(0): 0101010101019e1b5678500018303020
[ 33.018] (II) fglrx(0): 250058c2100000190000000f00000000
[ 33.018] (II) fglrx(0): 00000000001eb4021500000000fe0053
[ 33.018] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 33.018] (II) fglrx(0): 004c544e31353641543234380a2000c3
[ 33.018] (II) fglrx(0): End of Display0 EDID data --------------------
[ 33.018] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[ 33.020] (II) fglrx(0): EDID for output LVDS
[ 33.020] (II) fglrx(0): Manufacturer: SEC Model: 384a Serial#: 0
[ 33.020] (II) fglrx(0): Year: 2011 Week: 0
[ 33.020] (II) fglrx(0): EDID Version: 1.3
[ 33.020] (II) fglrx(0): Digital Display Input
[ 33.020] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 33.020] (II) fglrx(0): Gamma: 2.20
[ 33.020] (II) fglrx(0): No DPMS capabilities specified
[ 33.020] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 33.020] (II) fglrx(0): First detailed timing is preferred mode
[ 33.020] (II) fglrx(0): redX: 0.615 redY: 0.355 greenX: 0.355 greenY: 0.610
[ 33.020] (II) fglrx(0): blueX: 0.150 blueY: 0.100 whiteX: 0.313 whiteY: 0.329
[ 33.020] (II) fglrx(0): Manufacturer's mask: 0
[ 33.020] (II) fglrx(0): Supported detailed timing:
[ 33.020] (II) fglrx(0): clock: 70.7 MHz Image Size: 344 x 194 mm
[ 33.020] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
[ 33.020] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 792 v_border: 0
[ 33.020] (II) fglrx(0): Unknown vendor-specific block f
[ 33.020] (II) fglrx(0): SAMSUNG
[ 33.020] (II) fglrx(0): LTN156AT248
[ 33.020] (II) fglrx(0): EDID (in hex):
[ 33.020] (II) fglrx(0): 00ffffffffffff004ca34a3800000000
[ 33.021] (II) fglrx(0): 00150103802213780a81a59d5b5b9c26
[ 33.021] (II) fglrx(0): 19505400000001010101010101010101
[ 33.021] (II) fglrx(0): 0101010101019e1b5678500018303020
[ 33.021] (II) fglrx(0): 250058c2100000190000000f00000000
[ 33.021] (II) fglrx(0): 00000000001eb4021500000000fe0053
[ 33.021] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 33.021] (II) fglrx(0): 004c544e31353641543234380a2000c3
[ 33.021] (II) fglrx(0): EDID vendor "SEC", prod id 14410
[ 33.021] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.021] (II) fglrx(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 33.021] (II) fglrx(0): Printing probed modes for output LVDS
[ 33.021] (II) fglrx(0): Modeline "1366x768"x60.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz)
[ 33.021] (II) fglrx(0): Modeline "1360x768"x60.0 70.70 1360 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz)
[ 33.021] (II) fglrx(0): Modeline "1280x768"x60.0 70.70 1280 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz)
[ 33.021] (II) fglrx(0): Modeline "1280x720"x60.0 70.70 1280 1414 1446 1486 720 770 775 792 -hsync -vsync (47.6 kHz)
[ 33.021] (II) fglrx(0): Modeline "1024x768"x60.0 70.70 1024 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz)
[ 33.021] (II) fglrx(0): Modeline "1024x600"x60.0 70.70 1024 1414 1446 1486 600 770 775 792 -hsync -vsync (47.6 kHz)
[ 33.022] (II) fglrx(0): Modeline "800x600"x60.0 70.70 800 1414 1446 1486 600 770 775 792 -hsync -vsync (47.6 kHz)
[ 33.022] (II) fglrx(0): Modeline "800x480"x60.0 70.70 800 1414 1446 1486 480 770 775 792 -hsync -vsync (47.6 kHz)
[ 33.022] (II) fglrx(0): Modeline "640x480"x60.0 70.70 640 1414 1446 1486 480 770 775 792 -hsync -vsync (47.6 kHz)
[ 33.022] (II) fglrx(0): EDID for output DFP1
[ 33.022] (II) fglrx(0): EDID for output CRT1
[ 33.022] (II) fglrx(0): Output LVDS connected
[ 33.022] (II) fglrx(0): Output DFP1 disconnected
[ 33.022] (II) fglrx(0): Output CRT1 disconnected
[ 33.022] (II) fglrx(0): Using exact sizes for initial modes
[ 33.022] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 33.022] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 33.022] (II) fglrx(0): DPI set to (102, 102)
[ 33.022] (II) fglrx(0): Adapter AMD Radeon HD 6320 Graphics has 2 configurable heads and 1 displays connected.
[ 33.023] (==) fglrx(0): PseudoColor visuals disabled
[ 33.023] (II) Loading sub module "ramdac"
[ 33.023] (II) LoadModule: "ramdac"
[ 33.023] (II) Module "ramdac" already built-in
[ 33.023] (==) fglrx(0): NoDRI = NO
[ 33.023] (==) fglrx(0): Capabilities: 0x00000000
[ 33.023] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 33.023] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 33.023] (==) fglrx(0): UseFastTLS=0
[ 33.023] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 33.023] (II) fglrx(1): === [xdl_xs112_atiddxPreInit] === begin
[ 33.024] (WW) fglrx(1): Quitting screen 1 -- no monitor specified.
[ 33.025] (II) fglrx(1): === [xdl_xs112_atiddxPreInit] === end
[ 33.025] (II) UnloadModule: "fglrx"
[ 33.025] (II) UnloadSubModule: "fglrxdrm"
[ 33.025] (--) Depth 24 pixmap format is 32 bpp
[ 33.025] (II) Loading extension ATIFGLRXDRI
[ 33.026] (II) fglrx(0): doing swlDriScreenInit
[ 33.026] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 33.026] ukiDynamicMajor: found major device number 251
[ 33.026] ukiDynamicMajor: found major device number 251
[ 33.026] ukiDynamicMajor: found major device number 251
[ 33.026] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 33.026] ukiOpenDevice: node name is /dev/ati/card0
[ 33.027] ukiOpenDevice: open result is 11, (OK)
[ 33.027] ukiOpenByBusid: ukiOpenMinor returns 11
[ 33.027] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 33.027] (II) fglrx(0): [uki] DRM interface version 1.0
[ 33.027] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[ 33.027] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 33.027] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f0268bf7000
[ 33.027] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 33.027] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 33.027] (II) fglrx(0): swlDriScreenInit done
[ 33.027] (II) fglrx(0): Kernel Module Version Information:
[ 33.027] (II) fglrx(0): Name: fglrx
[ 33.027] (II) fglrx(0): Version: 14.10.2
[ 33.027] (II) fglrx(0): Date: May 5 2014
[ 33.028] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 33.028] (II) fglrx(0): Kernel Module version matches driver.
[ 33.028] (II) fglrx(0): Kernel Module Build Time Information:
[ 33.028] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-4-amd64
[ 33.028] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 33.028] (II) fglrx(0): Build-Kernel __SMP__: no
[ 33.028] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 33.028] (II) fglrx(0): [uki] register handle = 0x00004000
[ 33.069] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[ 33.069] (II) fglrx(0): DRI initialization successfull
[ 33.078] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01110000
[ 33.085] (==) fglrx(0): Backing store disabled
[ 33.086] (II) Loading extension FGLRXEXTENSION
[ 33.086] (**) fglrx(0): DPMS enabled
[ 33.086] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 33.086] (**) fglrx(0): Textured Video is enabled.
[ 33.086] (II) LoadModule: "glesx"
[ 33.087] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 33.296] (II) Module glesx: vendor="X.Org Foundation"
[ 33.297] compiled for 1.4.99.906, module version = 1.0.0
[ 33.297] (II) Loading extension GLESX
[ 33.297] (II) fglrx(0): GLESX enableFlags = 8784
[ 33.305] (II) fglrx(0): GLESX is enabled
[ 33.305] (II) LoadModule: "amdxmm"
[ 33.305] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 33.324] (II) Module amdxmm: vendor="X.Org Foundation"
[ 33.324] compiled for 1.4.99.906, module version = 2.0.0
[ 33.334] (II) Loading extension AMDXVOPL
[ 33.334] (II) Loading extension AMDXVBA
[ 33.368] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 33.374] (II) fglrx(0): Enable composite support successfully
[ 33.375] (WW) fglrx(0): Option "VendorName" is not used
[ 33.375] (WW) fglrx(0): Option "ModelName" is not used
[ 33.375] (II) fglrx(0): X context handle = 0x1
[ 33.375] (II) fglrx(0): [DRI] installation complete
[ 33.375] (==) fglrx(0): Silken mouse enabled
[ 33.376] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 33.377] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 33.377] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 33.377] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 34.376] (--) RandR disabled
[ 34.376] (II) Initializing built-in extension Generic Event Extension
[ 34.376] (II) Initializing built-in extension SHAPE
[ 34.376] (II) Initializing built-in extension MIT-SHM
[ 34.376] (II) Initializing built-in extension XInputExtension
[ 34.376] (II) Initializing built-in extension XTEST
[ 34.376] (II) Initializing built-in extension BIG-REQUESTS
[ 34.376] (II) Initializing built-in extension SYNC
[ 34.376] (II) Initializing built-in extension XKEYBOARD
[ 34.377] (II) Initializing built-in extension XC-MISC
[ 34.377] (II) Initializing built-in extension SECURITY
[ 34.377] (II) Initializing built-in extension XINERAMA
[ 34.377] (II) Initializing built-in extension XFIXES
[ 34.377] (II) Initializing built-in extension RENDER
[ 34.377] (II) Initializing built-in extension RANDR
[ 34.377] (II) Initializing built-in extension COMPOSITE
[ 34.377] (II) Initializing built-in extension DAMAGE
[ 34.377] (II) SELinux: Disabled on system
[ 34.381] ukiDynamicMajor: found major device number 251
[ 34.381] ukiDynamicMajor: found major device number 251
[ 34.381] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 34.381] ukiOpenDevice: node name is /dev/ati/card0
[ 34.381] ukiOpenDevice: open result is 12, (OK)
[ 34.381] ukiOpenByBusid: ukiOpenMinor returns 12
[ 34.381] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 34.381] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 34.381] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 34.382] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 34.791] ukiDynamicMajor: found major device number 251
[ 34.792] ukiDynamicMajor: found major device number 251
[ 34.792] ukiDynamicMajor: found major device number 251
[ 34.792] ukiOpenDevice: node name is /dev/ati/card0
[ 34.792] ukiOpenDevice: open result is 13, (OK)
[ 34.792] ukiGetBusid returned 'PCI:0:1:0'
[ 34.792] ukiOpenDevice: node name is /dev/ati/card1
[ 34.792] ukiOpenDevice: open result is -1, (No such device)
[ 34.792] ukiOpenDevice: open result is -1, (No such device)
[ 34.792] ukiOpenDevice: Open failed
[ 34.792] ukiOpenDevice: node name is /dev/ati/card2
[ 34.792] ukiOpenDevice: open result is -1, (No such device)
[ 34.792] ukiOpenDevice: open result is -1, (No such device)
[ 34.792] ukiOpenDevice: Open failed
[ 34.792] ukiOpenDevice: node name is /dev/ati/card3
[ 34.793] ukiOpenDevice: open result is -1, (No such device)
[ 34.793] ukiOpenDevice: open result is -1, (No such device)
[ 34.793] ukiOpenDevice: Open failed
[ 34.793] ukiOpenDevice: node name is /dev/ati/card4
[ 34.793] ukiOpenDevice: open result is -1, (No such device)
[ 34.793] ukiOpenDevice: open result is -1, (No such device)
[ 34.793] ukiOpenDevice: Open failed
[ 34.793] ukiOpenDevice: node name is /dev/ati/card5
[ 34.793] ukiOpenDevice: open result is -1, (No such device)
[ 34.793] ukiOpenDevice: open result is -1, (No such device)
[ 34.793] ukiOpenDevice: Open failed
[ 34.793] ukiOpenDevice: node name is /dev/ati/card6
[ 34.793] ukiOpenDevice: open result is -1, (No such device)
[ 34.793] ukiOpenDevice: open result is -1, (No such device)
[ 34.793] ukiOpenDevice: Open failed
[ 34.793] ukiOpenDevice: node name is /dev/ati/card7
[ 34.793] ukiOpenDevice: open result is -1, (No such device)
[ 34.794] ukiOpenDevice: open result is -1, (No such device)
[ 34.794] ukiOpenDevice: Open failed
[ 34.794] ukiOpenDevice: node name is /dev/ati/card8
[ 34.794] ukiOpenDevice: open result is -1, (No such device)
[ 34.794] ukiOpenDevice: open result is -1, (No such device)
[ 34.794] ukiOpenDevice: Open failed
[ 34.794] ukiOpenDevice: node name is /dev/ati/card9
[ 34.794] ukiOpenDevice: open result is -1, (No such device)
[ 34.794] ukiOpenDevice: open result is -1, (No such device)
[ 34.794] ukiOpenDevice: Open failed
[ 34.794] ukiOpenDevice: node name is /dev/ati/card10
[ 34.794] ukiOpenDevice: open result is -1, (No such device)
[ 34.794] ukiOpenDevice: open result is -1, (No such device)
[ 34.794] ukiOpenDevice: Open failed
[ 34.794] ukiOpenDevice: node name is /dev/ati/card11
[ 34.794] ukiOpenDevice: open result is -1, (No such device)
[ 34.794] ukiOpenDevice: open result is -1, (No such device)
[ 34.795] ukiOpenDevice: Open failed
[ 34.795] ukiOpenDevice: node name is /dev/ati/card12
[ 34.795] ukiOpenDevice: open result is -1, (No such device)
[ 34.795] ukiOpenDevice: open result is -1, (No such device)
[ 34.795] ukiOpenDevice: Open failed
[ 34.795] ukiOpenDevice: node name is /dev/ati/card13
[ 34.795] ukiOpenDevice: open result is -1, (No such device)
[ 34.795] ukiOpenDevice: open result is -1, (No such device)
[ 34.795] ukiOpenDevice: Open failed
[ 34.795] ukiOpenDevice: node name is /dev/ati/card14
[ 34.795] ukiOpenDevice: open result is -1, (No such device)
[ 34.795] ukiOpenDevice: open result is -1, (No such device)
[ 34.795] ukiOpenDevice: Open failed
[ 34.795] ukiOpenDevice: node name is /dev/ati/card15
[ 34.795] ukiOpenDevice: open result is -1, (No such device)
[ 34.795] ukiOpenDevice: open result is -1, (No such device)
[ 34.795] ukiOpenDevice: Open failed
[ 34.796] ukiDynamicMajor: found major device number 251
[ 34.796] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 34.796] ukiOpenDevice: node name is /dev/ati/card0
[ 34.796] ukiOpenDevice: open result is 13, (OK)
[ 34.796] ukiOpenByBusid: ukiOpenMinor returns 13
[ 34.796] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 35.878] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 35.880] ukiDynamicMajor: found major device number 251
[ 35.880] ukiDynamicMajor: found major device number 251
[ 35.880] ukiDynamicMajor: found major device number 251
[ 35.881] ukiOpenDevice: node name is /dev/ati/card0
[ 35.881] ukiOpenDevice: open result is 14, (OK)
[ 35.881] ukiGetBusid returned 'PCI:0:1:0'
[ 35.881] ukiOpenDevice: node name is /dev/ati/card1
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: Open failed
[ 35.881] ukiOpenDevice: node name is /dev/ati/card2
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: Open failed
[ 35.881] ukiOpenDevice: node name is /dev/ati/card3
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: Open failed
[ 35.881] ukiOpenDevice: node name is /dev/ati/card4
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: Open failed
[ 35.881] ukiOpenDevice: node name is /dev/ati/card5
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: Open failed
[ 35.881] ukiOpenDevice: node name is /dev/ati/card6
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: Open failed
[ 35.881] ukiOpenDevice: node name is /dev/ati/card7
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: open result is -1, (No such device)
[ 35.881] ukiOpenDevice: Open failed
[ 35.881] ukiOpenDevice: node name is /dev/ati/card8
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: Open failed
[ 35.882] ukiOpenDevice: node name is /dev/ati/card9
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: Open failed
[ 35.882] ukiOpenDevice: node name is /dev/ati/card10
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: Open failed
[ 35.882] ukiOpenDevice: node name is /dev/ati/card11
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: Open failed
[ 35.882] ukiOpenDevice: node name is /dev/ati/card12
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: Open failed
[ 35.882] ukiOpenDevice: node name is /dev/ati/card13
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: Open failed
[ 35.882] ukiOpenDevice: node name is /dev/ati/card14
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: Open failed
[ 35.882] ukiOpenDevice: node name is /dev/ati/card15
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: open result is -1, (No such device)
[ 35.882] ukiOpenDevice: Open failed
[ 35.883] ukiDynamicMajor: found major device number 251
[ 35.883] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 35.883] ukiOpenDevice: node name is /dev/ati/card0
[ 35.883] ukiOpenDevice: open result is 14, (OK)
[ 35.883] ukiOpenByBusid: ukiOpenMinor returns 14
[ 35.883] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 36.037] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 36.521] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 36.521] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 36.521] (II) LoadModule: "evdev"
[ 36.546] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 36.562] (II) Module evdev: vendor="X.Org Foundation"
[ 36.562] compiled for 1.12.1, module version = 2.7.0
[ 36.562] Module class: X.Org XInput Driver
[ 36.562] ABI class: X.Org XInput driver, version 16.0
[ 36.562] (II) Using input driver 'evdev' for 'Power Button'
[ 36.562] (**) Power Button: always reports core events
[ 36.562] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 36.562] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 36.562] (--) evdev: Power Button: Found keys
[ 36.562] (II) evdev: Power Button: Configuring as keyboard
[ 36.562] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 36.562] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 36.562] (**) Option "xkb_rules" "evdev"
[ 36.562] (**) Option "xkb_model" "pc105"
[ 36.563] (**) Option "xkb_layout" "us,ru"
[ 36.563] (**) Option "xkb_variant" ","
[ 36.563] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 36.640] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 36.640] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 36.640] (II) Using input driver 'evdev' for 'Video Bus'
[ 36.640] (**) Video Bus: always reports core events
[ 36.640] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 36.640] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 36.640] (--) evdev: Video Bus: Found keys
[ 36.640] (II) evdev: Video Bus: Configuring as keyboard
[ 36.640] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6/event6"
[ 36.640] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 36.640] (**) Option "xkb_rules" "evdev"
[ 36.640] (**) Option "xkb_model" "pc105"
[ 36.640] (**) Option "xkb_layout" "us,ru"
[ 36.640] (**) Option "xkb_variant" ","
[ 36.640] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 36.641] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 36.641] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 36.641] (II) Using input driver 'evdev' for 'Power Button'
[ 36.641] (**) Power Button: always reports core events
[ 36.641] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 36.641] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 36.641] (--) evdev: Power Button: Found keys
[ 36.641] (II) evdev: Power Button: Configuring as keyboard
[ 36.642] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 36.642] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id

[ 36.642] (**) Option "xkb_rules" "evdev"
[ 36.642] (**) Option "xkb_model" "pc105"
[ 36.642] (**) Option "xkb_layout" "us,ru"
[ 36.642] (**) Option "xkb_variant" ","
[ 36.642] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 36.643] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 36.643] (II) No input driver specified, ignoring this device.
[ 36.643] (II) This device may have been added with another device file.
[ 36.643] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 36.643] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 36.643] (II) Using input driver 'evdev' for 'Sleep Button'
[ 36.643] (**) Sleep Button: always reports core events
[ 36.643] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 36.643] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 36.643] (--) evdev: Sleep Button: Found keys
[ 36.643] (II) evdev: Sleep Button: Configuring as keyboard
[ 36.644] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
[ 36.644] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 36.644] (**) Option "xkb_rules" "evdev"
[ 36.644] (**) Option "xkb_model" "pc105"
[ 36.644] (**) Option "xkb_layout" "us,ru"
[ 36.644] (**) Option "xkb_variant" ","
[ 36.644] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 36.645] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event8)
[ 36.645] (II) No input driver specified, ignoring this device.
[ 36.645] (II) This device may have been added with another device file.
[ 36.646] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 36.646] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 36.646] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 36.646] (**) Logitech USB Optical Mouse: always reports core events
[ 36.646] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 36.646] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[ 36.646] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 36.646] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 36.646] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 36.646] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 36.646] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 36.646] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 36.646] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 36.646] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 36.646] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.0/input/input1/event1"
[ 36.646] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[ 36.646] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 36.647] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 36.647] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 36.647] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 36.647] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 36.647] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 36.647] (II) No input driver specified, ignoring this device.
[ 36.647] (II) This device may have been added with another device file.
[ 36.648] (II) config/udev: Adding input device WebCam SC-0311139N (/dev/input/event12)
[ 36.648] (**) WebCam SC-0311139N: Applying InputClass "evdev keyboard catchall"
[ 36.648] (II) Using input driver 'evdev' for 'WebCam SC-0311139N'
[ 36.648] (**) WebCam SC-0311139N: always reports core events
[ 36.648] (**) evdev: WebCam SC-0311139N: Device: "/dev/input/event12"
[ 36.648] (--) evdev: WebCam SC-0311139N: Vendor 0x2232 Product 0x1020
[ 36.648] (--) evdev: WebCam SC-0311139N: Found keys
[ 36.648] (II) evdev: WebCam SC-0311139N: Configuring as keyboard
[ 36.648] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input12/event12"
[ 36.648] (II) XINPUT: Adding extended input device "WebCam SC-0311139N" (type: KEYBOARD, id 11)
[ 36.648] (**) Option "xkb_rules" "evdev"
[ 36.648] (**) Option "xkb_model" "pc105"
[ 36.648] (**) Option "xkb_layout" "us,ru"
[ 36.648] (**) Option "xkb_variant" ","
[ 36.648] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 36.649] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event10)
[ 36.649] (II) No input driver specified, ignoring this device.
[ 36.649] (II) This device may have been added with another device file.
[ 36.650] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event11)
[ 36.650] (II) No input driver specified, ignoring this device.
[ 36.650] (II) This device may have been added with another device file.
[ 36.651] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 36.651] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 36.651] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 36.651] (**) AT Translated Set 2 keyboard: always reports core events
[ 36.651] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 36.651] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 36.651] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 36.651] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 36.651] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 36.651] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 36.651] (**) Option "xkb_rules" "evdev"
[ 36.651] (**) Option "xkb_model" "pc105"
[ 36.651] (**) Option "xkb_layout" "us,ru"
[ 36.651] (**) Option "xkb_variant" ","
[ 36.651] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 36.652] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 36.652] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 36.652] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Multitouch Touchpad"
[ 36.652] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 36.652] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 36.652] (II) LoadModule: "synaptics"
[ 36.653] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 36.675] (II) Module synaptics: vendor="X.Org Foundation"
[ 36.675] compiled for 1.12.4, module version = 1.6.2
[ 36.675] Module class: X.Org XInput Driver
[ 36.675] ABI class: X.Org XInput driver, version 16.0
[ 36.675] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 36.675] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 36.675] (**) Option "Device" "/dev/input/event9"
[ 36.700] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2508
[ 36.700] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1320
[ 36.700] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 36.700] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 36.700] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 36.700] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 36.700] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 36.700] (**) ETPS

[свернуть]

ssorgoth · 01 июля 2014, 21:32:10

dpkg -l | grep fglrx

Код Выделить

ii  fglrx-atieventsd                      1:14.4.2-1                           amd64          events daemon for the non-free ATI/AMD RadeonHD display driver
rc  fglrx-control                                   1:12-6+point-3                     amd64          control panel for the non-free ATI/AMD RadeonHD display driver
ii  fglrx-driver                                      1:14.4.2-1                           amd64          non-free ATI/AMD RadeonHD display driver
ii  fglrx-modules-dkms                         1:14.4.2-1                           amd64          dkms module source for the non-free ATI/AMD RadeonHD display driver
ii  fglrx-source                                    1:14.4.2-1                           amd64          kernel module source for the non-free ATI/AMD RadeonHD display driver
ii  glx-alternative-fglrx                          0.4.1                                  amd64          allows the selection of FGLRX as GLX provider
ii  libfglrx:amd64                                 1:14.4.2-1                           amd64          non-free ATI/AMD RadeonHD display driver (runtime libraries)
ii  libfglrx-amdxvba1:amd64                 1:14.4.2-1                           amd64          AMD XvBA (X-Video Bitstream Acceleration) runtime libraries
ii  libgl1-fglrx-glx:amd64                       1:14.4.2-1                          amd64          proprietary libGL for the non-free ATI/AMD RadeonHD display driver

ssorgoth · 01 июля 2014, 21:41:30

Я так понимаю, дрова не видят видеокарты?

ihammers · 02 июля 2014, 13:38:45

Цитата: ssorgoth от 01 июля 2014, 21:41:30
Я так понимаю, дрова не видят видеокарты?

Просмотр логов не дал мне ответа. Похоже ошибка в другом месте. Покажите что у конфигурационных файлах:

Код Выделить

~$ cat /etc/X11/xorg.conf

ssorgoth · 04 июля 2014, 10:48:17

cat /etc/X11/xorg.conf

Код Выделить

Section "ServerLayout"
        Identifier     "aticonfig Layout"
        Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]-0"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
EndSection

Section "Device"
        Identifier  "aticonfig-Device[0]-0"
        Driver      "fglrx"
        BusID       "PCI:0:1:0"
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]-0"
        Device     "aticonfig-Device[0]-0"
        Monitor    "aticonfig-Monitor[0]-0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

ssorgoth · 05 июля 2014, 04:26:11

Оказывается:

Открыть содержимое (спойлер)

Код Выделить

# startx


X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
Current Operating System: Linux carefree 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=bfe4270e-166c-4a74-9b86-824f43146995 ro quiet
Build Date: 17 December 2013  07:37:58PM
xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.26.0
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sat Jul  5 03:04:42 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
FATAL: Module fglrx not found.
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
FATAL: Module fglrx not found.
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
xinit: connection to X server lost

waiting for X server to shut down .Server terminated successfully (0). Closing log file.

[свернуть]

Я не понимаю, что именно после этого происходит, но система переходит в какой-то новый сеанс.
И вот что пишет в этом "сеансе":

Код Выделить

~# fglrxinfo
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  139 (ATIFGLEXTENSION)
  Minor opcode of failed request:  66 ()
  Serial number of failed request:  13
  Current serial number in output stream:  13

ihammers · 07 июля 2014, 05:45:10

Мне не нравиться, что есть сообщения, что нету модуля. Попробуйте его пересобрать:

Код Выделить

~# dpkg-reconfigure fglrx-modules-dkms

Вывод команды под спойлер. Надеюсь, этого будет достаточно, чтобы решить проблему.

PS: заметил, что драйвер новый (14.4.2-1), не из репозитария wheezy, возможно проблема с совместимостью модулей и ядра.

ssorgoth · 08 июля 2014, 19:33:39

На этот раз устанавливал из .run файла.

Код Выделить

~# fglrxinfo
display: :1  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 6320 Graphics
OpenGL version string: 4.4.12874 Compatibility Profile Context 14.10.1006.1001

Скачивал с офф сайта.