Инверсия осей мыши

[qupl]

masterdogs,

Код Выделить Развернуть

cat /etc/X11/*.conf
cat /etc/X11/xorg.conf.d/*.conf
cat /var/log/Xorg.0.log

вывод может быть большим - либо под спойлер либо через paste.debian.net выкладывайте

[masterdogs]

cat /etc/X11/*.conf
cat /etc/X11/xorg.conf.d/*.conf
cat /var/log/Xorg.0.log

Открыть содержимое (спойлер)

Код Выделить Развернуть

master@master-netbook:~$ cat /etc/X11/*.conf
cat: '/etc/X11/*.conf': Нет такого файла или каталога
master@master-netbook:~$ cat /etc/X11/xorg.conf.d/*.conf
cat: '/etc/X11/xorg.conf.d/*.conf': Нет такого файла или каталога
master@master-netbook:~$ cat /var/log/Xorg.0.log
[    23.327]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    23.327] X Protocol Version 11, Revision 0
[    23.327] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
[    23.327] Current Operating System: Linux master-netbook 4.9.0-11-686-pae #1 SMP Debian 4.9.189-3+deb9u2 (2019-11-11) i686
[    23.327] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-686-pae root=UUID=a9a91022-04c5-49ea-a89a-871305f9475c ro quiet
[    23.328] Build Date: 03 November 2018  03:08:43AM
[    23.328] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support)
[    23.328] Current version of pixman: 0.34.0
[    23.328] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    23.328] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.328] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  3 12:51:47 2019
[    23.355] (==) Using config file: "/etc/X11/xorg.conf"
[    23.355] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.407] (==) No Layout section.  Using the first Screen section.
[    23.407] (==) No screen section available. Using defaults.
[    23.407] (**) |-->Screen "Default Screen Section" (0)
[    23.407] (**) |   |-->Monitor "<default monitor>"
[    23.423] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    23.423] (==) Automatically adding devices
[    23.423] (==) Automatically enabling devices
[    23.423] (==) Automatically adding GPU devices
[    23.423] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    23.505] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.505] Entry deleted from font path.
[    23.536] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[    23.536] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.536] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.536] (II) Loader magic: 0x6b2720
[    23.536] (II) Module ABI versions:
[    23.536] X.Org ANSI C Emulation: 0.4
[    23.536] X.Org Video Driver: 23.0
[    23.536] X.Org XInput driver : 24.1
[    23.536] X.Org Server Extension : 10.0
[    23.538] (++) using VT number 7

[    23.539] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    23.540] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.556] (--) PCI:*(0:0:2:0) 8086:27ae:1025:022f rev 3, Mem @ 0x58280000/524288, 0x40000000/268435456, 0x58300000/262144, I/O @ 0x000060f0/8, BIOS @ 0x????????/131072
[    23.556] (--) PCI: (0:0:2:1) 8086:27a6:1025:022f rev 3, Mem @ 0x58200000/524288
[    23.575] (II) LoadModule: "glx"
[    23.599] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.804] (II) Module glx: vendor="X.Org Foundation"
[    23.804] compiled for 1.19.2, module version = 1.0.0
[    23.804] ABI class: X.Org Server Extension, version 10.0
[    23.804] (==) Matched intel as autoconfigured driver 0
[    23.804] (==) Matched intel as autoconfigured driver 1
[    23.814] (==) Matched modesetting as autoconfigured driver 2
[    23.814] (==) Matched fbdev as autoconfigured driver 3
[    23.815] (==) Matched vesa as autoconfigured driver 4
[    23.816] (==) Assigned the driver to the xf86ConfigLayout
[    23.816] (II) LoadModule: "intel"
[    23.817] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.887] (II) Module intel: vendor="X.Org Foundation"
[    23.887] compiled for 1.19.0, module version = 2.99.917
[    23.887] Module class: X.Org Video Driver
[    23.887] ABI class: X.Org Video Driver, version 23.0
[    23.887] (II) LoadModule: "modesetting"
[    23.887] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    23.901] (II) Module modesetting: vendor="X.Org Foundation"
[    23.902] compiled for 1.19.2, module version = 1.19.2
[    23.902] Module class: X.Org Video Driver
[    23.902] ABI class: X.Org Video Driver, version 23.0
[    23.902] (II) LoadModule: "fbdev"
[    23.902] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.904] (II) Module fbdev: vendor="X.Org Foundation"
[    23.904] compiled for 1.19.0, module version = 0.4.4
[    23.904] Module class: X.Org Video Driver
[    23.904] ABI class: X.Org Video Driver, version 23.0
[    23.904] (II) LoadModule: "vesa"
[    23.904] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.916] (II) Module vesa: vendor="X.Org Foundation"
[    23.916] compiled for 1.19.0, module version = 2.3.4
[    23.916] Module class: X.Org Video Driver
[    23.916] ABI class: X.Org Video Driver, version 23.0
[    23.916] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    23.918] (II) intel: Driver for Intel(R) HD Graphics
[    23.918] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    23.918] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    23.918] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    23.918] (II) FBDEV: driver for framebuffer: fbdev
[    23.918] (II) VESA: driver for VESA chipsets: vesa
[    24.038] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[    24.038] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1 (Timo Aaltonen <tjaalton@debian.org>)
[    24.038] (II) intel(0): SNA compiled for use with valgrind
[    24.042] (WW) Falling back to old probe method for modesetting
[    24.042] (WW) Falling back to old probe method for fbdev
[    24.042] (II) Loading sub module "fbdevhw"
[    24.042] (II) LoadModule: "fbdevhw"
[    24.043] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    24.044] (II) Module fbdevhw: vendor="X.Org Foundation"
[    24.044] compiled for 1.19.2, module version = 0.0.2
[    24.044] ABI class: X.Org Video Driver, version 23.0
[    24.044] (WW) Falling back to old probe method for vesa
[    24.046] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[    24.046] (--) intel(0): CPU: x86, sse2, sse3, ssse3; using a maximum of 1 threads
[    24.046] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    24.047] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    24.047] (==) intel(0): RGB weight 888
[    24.047] (==) intel(0): Default visual is TrueColor
[    24.047] (II) intel(0): Output LVDS1 has no monitor section
[    24.049] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[    24.049] (II) intel(0): Enabled output LVDS1
[    24.049] (II) intel(0): Output VGA1 has no monitor section
[    24.049] (II) intel(0): Enabled output VGA1
[    24.049] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    24.049] (II) intel(0): Output VIRTUAL1 has no monitor section
[    24.050] (II) intel(0): Enabled output VIRTUAL1
[    24.050] (--) intel(0): Output LVDS1 using initial mode 1024x600 on pipe 1
[    24.050] (==) intel(0): TearFree disabled
[    24.050] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    24.050] (==) intel(0): DPI set to (96, 96)
[    24.050] (II) Loading sub module "dri3"
[    24.050] (II) LoadModule: "dri3"
[    24.050] (II) Module "dri3" already built-in
[    24.050] (II) Loading sub module "dri2"
[    24.050] (II) LoadModule: "dri2"
[    24.050] (II) Module "dri2" already built-in
[    24.050] (II) Loading sub module "present"
[    24.050] (II) LoadModule: "present"
[    24.051] (II) Module "present" already built-in
[    24.051] (II) UnloadModule: "modesetting"
[    24.051] (II) Unloading modesetting
[    24.051] (II) UnloadModule: "fbdev"
[    24.051] (II) Unloading fbdev
[    24.051] (II) UnloadSubModule: "fbdevhw"
[    24.051] (II) Unloading fbdevhw
[    24.051] (II) UnloadModule: "vesa"
[    24.051] (II) Unloading vesa
[    24.051] (==) Depth 24 pixmap format is 32 bpp
[    24.073] (II) intel(0): SNA initialized with Alviso (gen3) backend
[    24.073] (==) intel(0): Backing store enabled
[    24.073] (==) intel(0): Silken mouse enabled
[    24.086] (II) intel(0): HW Cursor enabled
[    24.087] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    24.088] (==) intel(0): DPMS enabled
[    24.089] (==) intel(0): Display hotplug detection enabled
[    24.091] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[    24.091] (II) intel(0): [DRI2] Setup complete
[    24.091] (II) intel(0): [DRI2]   DRI driver: i915
[    24.091] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    24.091] (II) intel(0): direct rendering: DRI2 enabled
[    24.091] (II) intel(0): hardware support for Present enabled
[    24.091] (--) RandR disabled
[    24.116] (II) SELinux: Disabled on system
[    24.289] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    24.289] (II) AIGLX: enabled GLX_ARB_create_context
[    24.289] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    24.289] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    24.289] (II) AIGLX: enabled GLX_INTEL_swap_event
[    24.289] (II) AIGLX: enabled GLX_SGI_swap_control
[    24.289] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    24.289] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    24.289] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    24.289] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    24.289] (II) AIGLX: Loaded and initialized i915
[    24.289] (II) GLX: Initialized DRI2 GL provider for screen 0
[    24.297] (II) intel(0): switch to mode 1024x600@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[    24.308] (II) intel(0): Setting screen physical size to 270 x 158
[    24.802] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    24.802] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.803] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    24.803] (II) LoadModule: "libinput"
[    24.803] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    24.863] (II) Module libinput: vendor="X.Org Foundation"
[    24.863] compiled for 1.19.0, module version = 0.23.0
[    24.863] Module class: X.Org XInput Driver
[    24.863] ABI class: X.Org XInput driver, version 24.1
[    24.864] (II) Using input driver 'libinput' for 'Power Button'
[    24.864] (**) Power Button: always reports core events
[    24.864] (**) Option "Device" "/dev/input/event6"
[    24.864] (**) Option "_source" "server/udev"
[    24.866] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[    24.866] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[    24.884] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[    24.884] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.884] (**) Option "xkb_model" "pc105"
[    24.884] (**) Option "xkb_layout" "us,ru"
[    24.884] (**) Option "xkb_variant" ","
[    24.884] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    24.997] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[    24.997] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[    24.999] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    24.999] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.999] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    24.999] (II) Using input driver 'libinput' for 'Video Bus'
[    24.999] (**) Video Bus: always reports core events
[    24.999] (**) Option "Device" "/dev/input/event7"
[    24.999] (**) Option "_source" "server/udev"
[    25.001] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    25.001] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    25.020] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event7"
[    25.020] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    25.020] (**) Option "xkb_model" "pc105"
[    25.020] (**) Option "xkb_layout" "us,ru"
[    25.021] (**) Option "xkb_variant" ","
[    25.021] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    25.025] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    25.025] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    25.028] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    25.028] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.028] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    25.028] (II) Using input driver 'libinput' for 'Power Button'
[    25.029] (**) Power Button: always reports core events
[    25.029] (**) Option "Device" "/dev/input/event3"
[    25.029] (**) Option "_source" "server/udev"
[    25.031] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    25.031] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    25.048] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[    25.048] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    25.048] (**) Option "xkb_model" "pc105"
[    25.048] (**) Option "xkb_layout" "us,ru"
[    25.048] (**) Option "xkb_variant" ","
[    25.048] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    25.052] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    25.053] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    25.055] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    25.056] (II) No input driver specified, ignoring this device.
[    25.056] (II) This device may have been added with another device file.
[    25.058] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    25.058] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    25.058] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    25.058] (II) Using input driver 'libinput' for 'Sleep Button'
[    25.058] (**) Sleep Button: always reports core events
[    25.058] (**) Option "Device" "/dev/input/event5"
[    25.058] (**) Option "_source" "server/udev"
[    25.060] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[    25.060] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[    25.080] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event5"
[    25.080] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    25.080] (**) Option "xkb_model" "pc105"
[    25.080] (**) Option "xkb_layout" "us,ru"
[    25.080] (**) Option "xkb_variant" ","
[    25.081] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    25.085] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[    25.085] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[    25.089] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[    25.090] (II) No input driver specified, ignoring this device.
[    25.090] (II) This device may have been added with another device file.
[    25.092] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[    25.092] (II) No input driver specified, ignoring this device.
[    25.092] (II) This device may have been added with another device file.
[    25.094] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    25.094] (II) No input driver specified, ignoring this device.
[    25.094] (II) This device may have been added with another device file.
[    25.096] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event1)
[    25.096] (**) 2.4G Mouse: Applying InputClass "evdev pointer catchall"
[    25.096] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall"
[    25.096] (**) 2.4G Mouse: Applying InputClass "Invert Mouse"
[    25.096] (**) 2.4G Mouse: Applying InputClass "Invert Mouse"
[    25.096] (II) Using input driver 'libinput' for '2.4G Mouse'
[    25.097] (**) 2.4G Mouse: always reports core events
[    25.097] (**) Option "Device" "/dev/input/event1"
[    25.097] (**) Option "_source" "server/udev"
[    25.158] (II) input device '2.4G Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    25.158] (II) input device '2.4G Mouse', /dev/input/event1 is a pointer caps
[    25.188] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:1EA7:0064.0001/input/input3/event1"
[    25.189] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 10)
[    25.190] (**) Option "AccelerationScheme" "none"
[    25.190] (**) 2.4G Mouse: (accel) selected scheme none/0
[    25.190] (**) 2.4G Mouse: (accel) acceleration factor: 2.000
[    25.190] (**) 2.4G Mouse: (accel) acceleration threshold: 4
[    25.250] (II) input device '2.4G Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    25.250] (II) input device '2.4G Mouse', /dev/input/event1 is a pointer caps
[    25.254] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse0)
[    25.254] (II) No input driver specified, ignoring this device.
[    25.254] (II) This device may have been added with another device file.
[    25.258] (II) config/udev: Adding input device CNF9011 (/dev/input/event12)
[    25.259] (**) CNF9011: Applying InputClass "evdev keyboard catchall"
[    25.259] (**) CNF9011: Applying InputClass "libinput keyboard catchall"
[    25.259] (II) Using input driver 'libinput' for 'CNF9011'
[    25.259] (**) CNF9011: always reports core events
[    25.259] (**) Option "Device" "/dev/input/event12"
[    25.259] (**) Option "_source" "server/udev"
[    25.263] (II) input device 'CNF9011', /dev/input/event12 is tagged by udev as: Keyboard
[    25.263] (II) input device 'CNF9011', /dev/input/event12 is a keyboard
[    25.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input13/event12"
[    25.292] (II) XINPUT: Adding extended input device "CNF9011" (type: KEYBOARD, id 11)
[    25.292] (**) Option "xkb_model" "pc105"
[    25.292] (**) Option "xkb_layout" "us,ru"
[    25.292] (**) Option "xkb_variant" ","
[    25.292] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    25.297] (II) input device 'CNF9011', /dev/input/event12 is tagged by udev as: Keyboard
[    25.297] (II) input device 'CNF9011', /dev/input/event12 is a keyboard
[    25.299] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    25.300] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    25.300] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    25.300] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    25.300] (**) AT Translated Set 2 keyboard: always reports core events
[    25.300] (**) Option "Device" "/dev/input/event0"
[    25.300] (**) Option "_source" "server/udev"
[    25.302] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    25.302] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    25.340] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    25.340] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    25.340] (**) Option "xkb_model" "pc105"
[    25.340] (**) Option "xkb_layout" "us,ru"
[    25.340] (**) Option "xkb_variant" ","
[    25.340] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    25.344] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    25.345] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    25.347] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[    25.347] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    25.347] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    25.347] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    25.347] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    25.347] (II) LoadModule: "synaptics"
[    25.348] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    25.350] (II) Module synaptics: vendor="X.Org Foundation"
[    25.350] compiled for 1.19.0, module version = 1.9.0
[    25.350] Module class: X.Org XInput Driver
[    25.350] ABI class: X.Org XInput driver, version 24.1
[    25.350] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    25.350] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.350] (**) Option "Device" "/dev/input/event2"
[    25.388] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    25.388] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 121)
[    25.388] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5218 (res 182)
[    25.388] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    25.389] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    25.389] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    25.389] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    25.389] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    25.389] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.436] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    25.436] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    25.436] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    25.436] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    25.436] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
[    25.437] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    25.438] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    25.438] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    25.438] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    25.438] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    25.441] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    25.441] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    25.443] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[    25.443] (II) No input driver specified, ignoring this device.
[    25.443] (II) This device may have been added with another device file.
[    26.051] (II) intel(0): EDID vendor "SEC", prod id 21838
[    26.052] (II) intel(0): Printing DDC gathered Modelines:
[    26.052] (II) intel(0): Modeline "1024x600"x0.0   58.80  1024 1048 1184 1428  600 603 609 686 -hsync -vsync (41.2 kHz eP)
master@master-netbook:~$


[свернуть]

Мои "ручные" файлы xorg.conf убраны.

На всякий случай:

Открыть содержимое (спойлер)

Код Выделить Развернуть

master@master-netbook:~$ cat /usr/share/X11/xorg.conf.d/*.conf
Section "OutputClass"
Identifier "AMDgpu"
MatchDriver "amdgpu"
Driver "amdgpu"
EndSection#
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.

Section "InputClass"
        Identifier "evdev pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection
# Collection of quirks and blacklist/whitelists for specific devices.


# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
        Identifier "ThinkPad HDAPS accelerometer blacklist"
        MatchProduct "ThinkPad HDAPS accelerometer data"
        Option "Ignore" "on"
EndSection

# https://bugzilla.redhat.com/show_bug.cgi?id=523914
# Mouse does not move in PV Xen guest
# Explicitly tell evdev to not ignore the absolute axes.
Section "InputClass"
        Identifier "Xen Virtual Pointer axis blacklist"
        MatchProduct "Xen Virtual Pointer"
        Option "IgnoreAbsoluteAxes" "off"
        Option "IgnoreRelativeAxes" "off"
EndSection

# https://bugs.freedesktop.org/show_bug.cgi?id=55867
# Bug 55867 - Doesn't know how to tag XI_TRACKBALL
Section "InputClass"
        Identifier "Tag trackballs as XI_TRACKBALL"
        MatchProduct "trackball"
        MatchDriver "evdev"
        Option "TypeName" "TRACKBALL"
EndSection

# https://bugs.freedesktop.org/show_bug.cgi?id=62831
# Bug 62831 - Mionix Naos 5000 mouse detected incorrectly
Section "InputClass"
        Identifier "Tag Mionix Naos 5000 mouse XI_MOUSE"
        MatchProduct "La-VIEW Technology Naos 5000 Mouse"
        MatchDriver "evdev"
        Option "TypeName" "MOUSE"
       
EndSection
# Match on all types of devices but tablet devices and joysticks
Section "InputClass"
        Identifier "libinput pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection
Section "InputClass"
    Identifier  "Invert Mouse"
    MatchProduct    "Mouse"
    MatchDevicePath "/dev/input/event*"
    Option      "InvertY"       "true"
    Option      "InvertX"       "true"
EndSection
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
#   Option "OptionName" "value"
#
Section "InputClass"
        Identifier "touchpad catchall"
        Driver "synaptics"
        MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
#       MatchDevicePath "/dev/input/event*"
EndSection

Section "InputClass"
        Identifier "touchpad ignore duplicates"
        MatchIsTouchpad "on"
        MatchOS "Linux"
        MatchDevicePath "/dev/input/mouse*"
        Option "Ignore" "on"
EndSection

# This option enables the bottom right corner to be a right button on clickpads
# and the right and middle top areas to be right / middle buttons on clickpads
# with a top button area.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Default clickpad buttons"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
        Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
EndSection

# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Disable clickpad buttons on Apple touchpads"
        MatchProduct "Apple|bcm5974"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
# Some of the below input classes appear 3x times, once for each of
# "tablet", "touchscreen", and "touchpad" to ensure that the Wacom
# driver is not accidentally bound to other types of hardware that
# Wacom has made which are not handled by the wacom driver (e.g the
# Wacom Bluetooth Keyboard)
#
# https://sourceforge.net/p/linuxwacom/bugs/294/

Section "InputClass"
        Identifier "Wacom USB tablet class"
        MatchUSBID "056a:*"
        MatchDevicePath "/dev/input/event*"
        MatchIsTablet "true"
        Driver "wacom"
EndSection

Section "InputClass"
        Identifier "Wacom USB touchscreen class"
        MatchUSBID "056a:*"
        MatchDevicePath "/dev/input/event*"
        MatchIsTouchscreen "true"
        Driver "wacom"
EndSection

Section "InputClass"
        Identifier "Wacom USB touchpad class"
        MatchUSBID "056a:*"
        MatchDevicePath "/dev/input/event*"
        MatchIsTouchpad "true"
        Driver "wacom"
EndSection

Section "InputClass"
Identifier "Wacom tablet class"
MatchProduct "Wacom|WACOM|PTK-540WL|ISD-V4"
MatchDevicePath "/dev/input/event*"
MatchIsTablet "true"
Driver "wacom"
EndSection

Section "InputClass"
Identifier "Wacom touchscreen class"
MatchProduct "Wacom|WACOM|PTK-540WL|ISD-V4"
MatchDevicePath "/dev/input/event*"
MatchIsTouchscreen "true"
Driver "wacom"
EndSection

Section "InputClass"
Identifier "Wacom touchpad class"
MatchProduct "Wacom|WACOM|PTK-540WL|ISD-V4"
MatchDevicePath "/dev/input/event*"
MatchIsTouchpad "true"
Driver "wacom"
EndSection

# Serial Wacom devices should always be one of tablet, touchscreen, or
# touchpad so we can safely get away with just one match section in
# these cases
Section "InputClass"
        Identifier "Wacom PnP device class"
        MatchPnPID "WACf*|WCOM*|WACM*|FUJ02e5|FUJ02e7|FUJ02e9"
        MatchDevicePath "/dev/input/event*"
        Driver "wacom"
EndSection

Section "InputClass"
Identifier "Wacom serial class"
MatchProduct "Serial Wacom Tablet"
Driver "wacom"
EndSection

Section "InputClass"
        Identifier "Wacom serial class identifiers"
        MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
        Driver "wacom"
EndSection

# Hanwang tablets
Section "InputClass"
Identifier "Hanwang class"
MatchProduct "Hanwang"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
EndSection

# Waltop tablets
Section "InputClass"
Identifier "Waltop class"
MatchProduct "WALTOP"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
EndSection

# N-Trig Duosense Electromagnetic Digitizer
Section "InputClass"
Identifier "Wacom N-Trig class"
MatchProduct "HID 1b96:0001|N-Trig Pen|N-Trig DuoSense"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
Option "Button2" "3"
EndSection


[свернуть]

[qupl]

Вот теперь создайте файл в /etc/X11/xorg.conf.d/   только не нужно туда весь этот мусор, достаточно из первого поста секцию, если она соответствует вашему устройству

Код Выделить Развернуть


Section "InputClass"
        Identifier  "Invert Mouse"
        MatchProduct    "2.4G Mouse"
        MatchDevicePath "/dev/input/event*"
        Option      "InvertY"       "true"
        Option      "InvertX"       "true"
EndSection
.

[masterdogs]

Вот теперь создайте файл в /etc/X11/xorg.conf.d/

Без изменений. А вы, случайно, не ошиблись? Папка xorg.conf.d расположена в /usr/share/X11. Я создал папку по указанному вами пути и в ней файл

[qupl]

Нет, не ошибся.  Создали, перезагрузились, проверили тот же лог.

[masterdogs]

проверили тот же лог.

Вот лог

Открыть содержимое (спойлер)

Открыть содержимое (спойлер)

Код Выделить Развернуть

master@master-netbook:~$ cat /var/log/Xorg.0.log
[    23.021]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    23.021] X Protocol Version 11, Revision 0
[    23.021] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
[    23.021] Current Operating System: Linux master-netbook 4.9.0-11-686-pae #1 SMP Debian 4.9.189-3+deb9u2 (2019-11-11) i686
[    23.021] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-686-pae root=UUID=a9a91022-04c5-49ea-a89a-871305f9475c ro quiet
[    23.021] Build Date: 03 November 2018  03:08:43AM
[    23.021] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support)
[    23.021] Current version of pixman: 0.34.0
[    23.021] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    23.021] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.022] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  3 15:10:54 2019
[    23.059] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    23.059] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.132] (==) No Layout section.  Using the first Screen section.
[    23.132] (==) No screen section available. Using defaults.
[    23.132] (**) |-->Screen "Default Screen Section" (0)
[    23.132] (**) |   |-->Monitor "<default monitor>"
[    23.161] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    23.161] (==) Automatically adding devices
[    23.161] (==) Automatically enabling devices
[    23.161] (==) Automatically adding GPU devices
[    23.161] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    23.236] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.236] Entry deleted from font path.
[    23.241] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[    23.241] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.241] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.241] (II) Loader magic: 0x73e720
[    23.241] (II) Module ABI versions:
[    23.241] X.Org ANSI C Emulation: 0.4
[    23.241] X.Org Video Driver: 23.0
[    23.241] X.Org XInput driver : 24.1
[    23.241] X.Org Server Extension : 10.0
[    23.244] (++) using VT number 7

[    23.245] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    23.247] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.267] (--) PCI:*(0:0:2:0) 8086:27ae:1025:022f rev 3, Mem @ 0x58280000/524288, 0x40000000/268435456, 0x58300000/262144, I/O @ 0x000060f0/8, BIOS @ 0x????????/131072
[    23.268] (--) PCI: (0:0:2:1) 8086:27a6:1025:022f rev 3, Mem @ 0x58200000/524288
[    23.290] (II) LoadModule: "glx"
[    23.306] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.523] (II) Module glx: vendor="X.Org Foundation"
[    23.523] compiled for 1.19.2, module version = 1.0.0
[    23.523] ABI class: X.Org Server Extension, version 10.0
[    23.523] (==) Matched intel as autoconfigured driver 0
[    23.523] (==) Matched intel as autoconfigured driver 1
[    23.523] (==) Matched modesetting as autoconfigured driver 2
[    23.523] (==) Matched fbdev as autoconfigured driver 3
[    23.523] (==) Matched vesa as autoconfigured driver 4
[    23.523] (==) Assigned the driver to the xf86ConfigLayout
[    23.523] (II) LoadModule: "intel"
[    23.524] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.647] (II) Module intel: vendor="X.Org Foundation"
[    23.647] compiled for 1.19.0, module version = 2.99.917
[    23.647] Module class: X.Org Video Driver
[    23.647] ABI class: X.Org Video Driver, version 23.0
[    23.647] (II) LoadModule: "modesetting"
[    23.647] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    23.661] (II) Module modesetting: vendor="X.Org Foundation"
[    23.661] compiled for 1.19.2, module version = 1.19.2
[    23.662] Module class: X.Org Video Driver
[    23.662] ABI class: X.Org Video Driver, version 23.0
[    23.662] (II) LoadModule: "fbdev"
[    23.662] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.663] (II) Module fbdev: vendor="X.Org Foundation"
[    23.664] compiled for 1.19.0, module version = 0.4.4
[    23.664] Module class: X.Org Video Driver
[    23.664] ABI class: X.Org Video Driver, version 23.0
[    23.664] (II) LoadModule: "vesa"
[    23.664] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.676] (II) Module vesa: vendor="X.Org Foundation"
[    23.676] compiled for 1.19.0, module version = 2.3.4
[    23.676] Module class: X.Org Video Driver
[    23.676] ABI class: X.Org Video Driver, version 23.0
[    23.676] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    23.678] (II) intel: Driver for Intel(R) HD Graphics
[    23.678] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    23.678] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    23.678] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    23.678] (II) FBDEV: driver for framebuffer: fbdev
[    23.678] (II) VESA: driver for VESA chipsets: vesa
[    23.709] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[    23.709] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1 (Timo Aaltonen <tjaalton@debian.org>)
[    23.709] (II) intel(0): SNA compiled for use with valgrind
[    23.713] (WW) Falling back to old probe method for modesetting
[    23.713] (WW) Falling back to old probe method for fbdev
[    23.713] (II) Loading sub module "fbdevhw"
[    23.713] (II) LoadModule: "fbdevhw"
[    23.714] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.715] (II) Module fbdevhw: vendor="X.Org Foundation"
[    23.715] compiled for 1.19.2, module version = 0.0.2
[    23.715] ABI class: X.Org Video Driver, version 23.0
[    23.715] (WW) Falling back to old probe method for vesa
[    23.717] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[    23.717] (--) intel(0): CPU: x86, sse2, sse3, ssse3; using a maximum of 1 threads
[    23.718] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    23.718] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.718] (==) intel(0): RGB weight 888
[    23.718] (==) intel(0): Default visual is TrueColor
[    23.719] (II) intel(0): Output LVDS1 has no monitor section
[    23.720] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[    23.720] (II) intel(0): Enabled output LVDS1
[    23.720] (II) intel(0): Output VGA1 has no monitor section
[    23.720] (II) intel(0): Enabled output VGA1
[    23.720] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    23.721] (II) intel(0): Output VIRTUAL1 has no monitor section
[    23.721] (II) intel(0): Enabled output VIRTUAL1
[    23.721] (--) intel(0): Output LVDS1 using initial mode 1024x600 on pipe 1
[    23.721] (==) intel(0): TearFree disabled
[    23.721] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    23.721] (==) intel(0): DPI set to (96, 96)
[    23.721] (II) Loading sub module "dri3"
[    23.721] (II) LoadModule: "dri3"
[    23.721] (II) Module "dri3" already built-in
[    23.721] (II) Loading sub module "dri2"
[    23.721] (II) LoadModule: "dri2"
[    23.722] (II) Module "dri2" already built-in
[    23.722] (II) Loading sub module "present"
[    23.722] (II) LoadModule: "present"
[    23.722] (II) Module "present" already built-in
[    23.722] (II) UnloadModule: "modesetting"
[    23.722] (II) Unloading modesetting
[    23.722] (II) UnloadModule: "fbdev"
[    23.722] (II) Unloading fbdev
[    23.722] (II) UnloadSubModule: "fbdevhw"
[    23.722] (II) Unloading fbdevhw
[    23.722] (II) UnloadModule: "vesa"
[    23.722] (II) Unloading vesa
[    23.722] (==) Depth 24 pixmap format is 32 bpp
[    23.744] (II) intel(0): SNA initialized with Alviso (gen3) backend
[    23.744] (==) intel(0): Backing store enabled
[    23.744] (==) intel(0): Silken mouse enabled
[    23.757] (II) intel(0): HW Cursor enabled
[    23.757] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    23.759] (==) intel(0): DPMS enabled
[    23.759] (==) intel(0): Display hotplug detection enabled
[    23.762] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[    23.762] (II) intel(0): [DRI2] Setup complete
[    23.762] (II) intel(0): [DRI2]   DRI driver: i915
[    23.762] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    23.762] (II) intel(0): direct rendering: DRI2 enabled
[    23.762] (II) intel(0): hardware support for Present enabled
[    23.762] (--) RandR disabled
[    23.783] (II) SELinux: Disabled on system
[    23.960] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.960] (II) AIGLX: enabled GLX_ARB_create_context
[    23.960] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    23.960] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    23.960] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.960] (II) AIGLX: enabled GLX_SGI_swap_control
[    23.960] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    23.960] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    23.960] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    23.960] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.960] (II) AIGLX: Loaded and initialized i915
[    23.960] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.968] (II) intel(0): switch to mode 1024x600@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[    23.969] (II) intel(0): Setting screen physical size to 270 x 158
[    24.462] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    24.462] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.462] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    24.462] (II) LoadModule: "libinput"
[    24.463] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    24.523] (II) Module libinput: vendor="X.Org Foundation"
[    24.523] compiled for 1.19.0, module version = 0.23.0
[    24.523] Module class: X.Org XInput Driver
[    24.523] ABI class: X.Org XInput driver, version 24.1
[    24.524] (II) Using input driver 'libinput' for 'Power Button'
[    24.524] (**) Power Button: always reports core events
[    24.524] (**) Option "Device" "/dev/input/event6"
[    24.524] (**) Option "_source" "server/udev"
[    24.526] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[    24.526] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[    24.544] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[    24.544] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.544] (**) Option "xkb_model" "pc105"
[    24.544] (**) Option "xkb_layout" "us,ru"
[    24.545] (**) Option "xkb_variant" ","
[    24.545] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    24.657] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[    24.657] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[    24.659] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    24.659] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.659] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    24.659] (II) Using input driver 'libinput' for 'Video Bus'
[    24.659] (**) Video Bus: always reports core events
[    24.659] (**) Option "Device" "/dev/input/event7"
[    24.659] (**) Option "_source" "server/udev"
[    24.661] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    24.661] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    24.680] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event7"
[    24.680] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    24.680] (**) Option "xkb_model" "pc105"
[    24.680] (**) Option "xkb_layout" "us,ru"
[    24.680] (**) Option "xkb_variant" ","
[    24.681] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    24.684] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    24.685] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    24.688] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    24.688] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.688] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    24.688] (II) Using input driver 'libinput' for 'Power Button'
[    24.688] (**) Power Button: always reports core events
[    24.688] (**) Option "Device" "/dev/input/event3"
[    24.688] (**) Option "_source" "server/udev"
[    24.690] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    24.690] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    24.704] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[    24.704] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    24.704] (**) Option "xkb_model" "pc105"
[    24.704] (**) Option "xkb_layout" "us,ru"
[    24.704] (**) Option "xkb_variant" ","
[    24.704] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    24.707] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    24.707] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    24.710] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    24.710] (II) No input driver specified, ignoring this device.
[    24.710] (II) This device may have been added with another device file.
[    24.712] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    24.712] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    24.712] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    24.712] (II) Using input driver 'libinput' for 'Sleep Button'
[    24.713] (**) Sleep Button: always reports core events
[    24.713] (**) Option "Device" "/dev/input/event5"
[    24.713] (**) Option "_source" "server/udev"
[    24.715] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[    24.715] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[    24.728] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event5"
[    24.728] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    24.728] (**) Option "xkb_model" "pc105"
[    24.728] (**) Option "xkb_layout" "us,ru"
[    24.728] (**) Option "xkb_variant" ","
[    24.728] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    24.731] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[    24.731] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[    24.734] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    24.734] (II) No input driver specified, ignoring this device.
[    24.734] (II) This device may have been added with another device file.
[    24.735] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[    24.735] (II) No input driver specified, ignoring this device.
[    24.735] (II) This device may have been added with another device file.
[    24.737] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[    24.737] (II) No input driver specified, ignoring this device.
[    24.738] (II) This device may have been added with another device file.
[    24.741] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event1)
[    24.741] (**) 2.4G Mouse: Applying InputClass "evdev pointer catchall"
[    24.741] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall"
[    24.741] (**) 2.4G Mouse: Applying InputClass "Invert Mouse"
[    24.741] (II) Using input driver 'libinput' for '2.4G Mouse'
[    24.741] (**) 2.4G Mouse: always reports core events
[    24.742] (**) Option "Device" "/dev/input/event1"
[    24.742] (**) Option "_source" "server/udev"
[    24.802] (II) input device '2.4G Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    24.802] (II) input device '2.4G Mouse', /dev/input/event1 is a pointer caps
[    24.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:1EA7:0064.0001/input/input3/event1"
[    24.844] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 10)
[    24.846] (**) Option "AccelerationScheme" "none"
[    24.846] (**) 2.4G Mouse: (accel) selected scheme none/0
[    24.846] (**) 2.4G Mouse: (accel) acceleration factor: 2.000
[    24.846] (**) 2.4G Mouse: (accel) acceleration threshold: 4
[    24.906] (II) input device '2.4G Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    24.906] (II) input device '2.4G Mouse', /dev/input/event1 is a pointer caps
[    24.910] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse0)
[    24.910] (II) No input driver specified, ignoring this device.
[    24.910] (II) This device may have been added with another device file.
[    24.913] (II) config/udev: Adding input device CNF9011 (/dev/input/event9)
[    24.913] (**) CNF9011: Applying InputClass "evdev keyboard catchall"
[    24.913] (**) CNF9011: Applying InputClass "libinput keyboard catchall"
[    24.913] (II) Using input driver 'libinput' for 'CNF9011'
[    24.914] (**) CNF9011: always reports core events
[    24.914] (**) Option "Device" "/dev/input/event9"
[    24.914] (**) Option "_source" "server/udev"
[    24.916] (II) input device 'CNF9011', /dev/input/event9 is tagged by udev as: Keyboard
[    24.916] (II) input device 'CNF9011', /dev/input/event9 is a keyboard
[    24.952] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input11/event9"
[    24.952] (II) XINPUT: Adding extended input device "CNF9011" (type: KEYBOARD, id 11)
[    24.952] (**) Option "xkb_model" "pc105"
[    24.952] (**) Option "xkb_layout" "us,ru"
[    24.952] (**) Option "xkb_variant" ","
[    24.952] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    24.957] (II) input device 'CNF9011', /dev/input/event9 is tagged by udev as: Keyboard
[    24.957] (II) input device 'CNF9011', /dev/input/event9 is a keyboard
[    24.959] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    24.960] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.960] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    24.960] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    24.960] (**) AT Translated Set 2 keyboard: always reports core events
[    24.960] (**) Option "Device" "/dev/input/event0"
[    24.960] (**) Option "_source" "server/udev"
[    24.962] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    24.962] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    24.992] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    24.992] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    24.992] (**) Option "xkb_model" "pc105"
[    24.992] (**) Option "xkb_layout" "us,ru"
[    24.992] (**) Option "xkb_variant" ","
[    24.993] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[    24.996] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    24.997] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    24.999] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[    24.999] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    24.999] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    24.999] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    24.999] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    24.999] (II) LoadModule: "synaptics"
[    25.000] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    25.002] (II) Module synaptics: vendor="X.Org Foundation"
[    25.002] compiled for 1.19.0, module version = 1.9.0
[    25.002] Module class: X.Org XInput Driver
[    25.002] ABI class: X.Org XInput driver, version 24.1
[    25.002] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    25.002] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.002] (**) Option "Device" "/dev/input/event2"
[    25.040] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    25.040] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 121)
[    25.041] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5218 (res 182)
[    25.041] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    25.041] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    25.041] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    25.041] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    25.041] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    25.041] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.084] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    25.084] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    25.084] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    25.084] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    25.084] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
[    25.085] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    25.086] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    25.086] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    25.086] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    25.086] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    25.089] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    25.089] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    25.091] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    25.091] (II) No input driver specified, ignoring this device.
[    25.091] (II) This device may have been added with another device file.
[    25.722] (II) intel(0): EDID vendor "SEC", prod id 21838
[    25.723] (II) intel(0): Printing DDC gathered Modelines:
[    25.723] (II) intel(0): Modeline "1024x600"x0.0   58.80  1024 1048 1184 1428  600 603 609 686 -hsync -vsync (41.2 kHz eP)


[свернуть]

[свернуть]

Я так понимаю, что суть проблемы тут?

Открыть содержимое (спойлер)

Код Выделить Развернуть

24.738] (II) This device may have been added with another device file.
[    24.741] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event1)
[    24.741] (**) 2.4G Mouse: Applying InputClass "evdev pointer catchall"
[    24.741] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall"
[    24.741] (**) 2.4G Mouse: Applying InputClass "Invert Mouse"
[    24.741] (II) Using input driver 'libinput' for '2.4G Mouse'
[    24.741] (**) 2.4G Mouse: always reports core events
[    24.742] (**) Option "Device" "/dev/input/event1"
[    24.742] (**) Option "_source" "server/udev"
[    24.802] (II) input device '2.4G Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    24.802] (II) input device '2.4G Mouse', /dev/input/event1 is a pointer caps
[    24.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:1EA7:0064.0001/input/input3/event1"
[    24.844] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 10)
[    24.846] (**) Option "AccelerationScheme" "none"
[    24.846] (**) 2.4G Mouse: (accel) selected scheme none/0
[    24.846] (**) 2.4G Mouse: (accel) acceleration factor: 2.000
[    24.846] (**) 2.4G Mouse: (accel) acceleration threshold: 4
[    24.906] (II) input device '2.4G Mouse', /dev/input/event1 is tagged by udev as: Mouse
[    24.906] (II) input device '2.4G Mouse', /dev/input/event1 is a pointer caps
[    24.910] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse0)
[    24.910] (II) No input driver specified, ignoring this device.
[    24.910] (II) This device may have been added with another device file.

[свернуть]

И где-то нужно прописать инверсию для устройства Mouse для udev?

[qupl]

Ошибок в них нет.  Вы остальные созданные конфиги в других местах (если есть) переместите пока в домашний каталог.

[masterdogs]

Вы остальные созданные конфиги в других местах (если есть) переместите пока в домашний каталог.
Сообщ

Лишних конфигов нигде не нашел

[masterdogs]

Ошибок в них нет

Как же все-таки убрать инверсию?

[qupl]

В логе видно что ваш конфиг обработался?
Где-то пишут, что через ГУИ меняют тип скроллинга. Я бы еще посмотрел значение свойств для мыши.

Код Выделить Развернуть

xinput --list-props 10
10 - код устройства, из первого поста.

[ecc83]

Провёл эксперимент.

Создал файл:

Код Выделить Развернуть

sudo nano /etc/X11/xorg.conf.d/50-invertaxes.conf

с таким содержимым:

Код Выделить Развернуть


Section "InputClass"
    Identifier      "Invert Mouse"
    MatchProduct    "Logitech USB Receiver"
    MatchDevicePath "/dev/input/event*"
    Option          "InvertY" "true"
    Option          "InvertX" "true"
EndSection


Обратить внимание на значение "MatchProduct" (взято из моей системы по команде):

Код Выделить Развернуть

xinput list

Если установить не соответствеющее значение, работать не будет.

После перезагрузки Х-сервера инверсия появилась, значит конфиг читается и всё работает.

Следовательно имеет место ошибка автора при создании конфигов или нужно задавать вопросы авторам OS "bunsenlabs Helium".

Всем спасибо за терпение

[masterdogs]

Я бы еще посмотрел значение свойств для мыши.

Открыть содержимое (спойлер)

Код Выделить Развернуть

xinput --list-props 10
Device '2.4G Mouse':
Device Enabled (136): 1
Coordinate Transformation Matrix (138): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
libinput Accel Speed (274): 0.000000
libinput Accel Speed Default (275): 0.000000
libinput Accel Profiles Available (276): 1, 1
libinput Accel Profile Enabled (277): 1, 0
libinput Accel Profile Enabled Default (278): 1, 0
libinput Natural Scrolling Enabled (279): 0
libinput Natural Scrolling Enabled Default (280): 0
libinput Send Events Modes Available (259): 1, 0
libinput Send Events Mode Enabled (260): 0, 0
libinput Send Events Mode Enabled Default (261): 0, 0
libinput Left Handed Enabled (281): 0
libinput Left Handed Enabled Default (282): 0
libinput Scroll Methods Available (283): 0, 0, 1
libinput Scroll Method Enabled (284): 0, 0, 0
libinput Scroll Method Enabled Default (285): 0, 0, 0
libinput Button Scrolling Button (286): 2
libinput Button Scrolling Button Default (287): 2
libinput Middle Emulation Enabled (288): 0
libinput Middle Emulation Enabled Default (289): 0
Device Node (262): "/dev/input/event1"
Device Product ID (263): 7847, 100
libinput Drag Lock Buttons (290): <no items>
libinput Horizontal Scroll Enabled (291): 1


[свернуть]

Конфиг читается, результата нет. Видимо что-то, более позднее по процессу загрузки, меняет обработку движений мыши. Больше я ничего предположить не могу. Спасибо за помощь

[masterdogs]

Провёл эксперимент.

Это именно то, с чего я начал свой пост. Сейчас мы выяснили,
что по логам конфиг читается, но результата нет независимо от того есть он или нет.

Вот и вопрос лично вам, как пользователю Опенбокса - он как-то обрабатывает мышку? (Прошу прощение за незнание терминов). Может можно что-то в rc.xml или ином опенбоксовском конфиге поправить? Это так, от тупиковости ситуации - сурка нет, а он есть.

Благодарю за сдержанность

[masterdogs]

Видимо моя волшебная мышь сама решает как и когда ей работать, да ещё успевает в конфиги заглянуть раньше загрузчика
Безумно интересно чем вызван этот феномен, но тратить столько времени на мышь уж слишком нерационально. Поменял мышку - работает нормально. Если у кого будут идеи по данной теме - в свободное время поэкспериментируем и проверим. Мышу с "автоинверсией" не выбрасываю, систему не меняю

[ecc83]

Конфиг читается, результата нет.

Как Вы определили что у Вас конфиг читается, если результата нет?
Я считаю, что причин может быть несколько:

- конфиг в вашем каталоге не читается системой (тогда его нужно переместить в другой каталог)
- неверно или с ошибкой указана строка "MatchProduct".

Попробуйте по очереди такие секции в конфиге:

Код Выделить Развернуть


Section "InputClass"
    Identifier      "Invert Mouse"
    MatchProduct    "2.4G Mouse"
    MatchDevicePath "/dev/input/event*"
    Option          "InvertY" "true"
    Option          "InvertX" "true"
EndSection


Код Выделить Развернуть


Section "InputClass"
    Identifier      "Invert Mouse"
    MatchProduct    "Mouse"
    MatchDevicePath "/dev/input/event*"
    Option          "InvertY" "true"
    Option          "InvertX" "true"
EndSection